Quick Drop - Non UI blocking / cancel while first loading

When first launching the Quick Drop tool it can take a while. This isn't a problem in itself, but the fact that you can cancel the loading or continue working in the background is. This is especially annoying if you launch it by mistake.
Not a major thing, just something that could be improved.

Similar Messages

Block cancellation/creation of billing document on CLOSED posting period

Hi Experts,
Currently, user is allowed to cancel/create backdated billing document where period already closed, but it does not release to accounting automatically, due to the period has been closed.
When account user found out that the accounting document is missing for the billing document, they have to re-open the period and manual release it to accounting, in order to generate the accounting document.
Therefore, we need the billing document to be blocked for cancellation/creation on CLOSED posting period.
Is there any settings in stardard SAP to block cancellation/creation of billing document on CLOSED posting period?
would appreciate your inputs.
Thanks and Regards,
N.C.Reddy

Hi ,
We have blocked cancellation/ creation of billing document through below user exit. Below is the progran code also.
***INCLUDE RV60AFZC.
FORM USEREXIT_NUMBER_RANGE_INV_DATE USING US_RANGE_INTERN.
Example: Number range from TVFK like in standard
US_RANGE_INTERN = TVFK-NUMKI.
*{   INSERT         KPDK904773                                        1
*Block creation or cancellation of billing doc in closed period
DATA : gv_gjahr TYPE bkpf-gjahr,
       gv_monat TYPE bkpf-monat,
       gv_poper TYPE t009b-poper,
       gv_bukrs TYPE t001-bukrs,
       lv_gjahr TYPE t001b-frye1,
       lv_monat TYPE t001b-frpe1,
       gv_oper TYPE t001b-frpe1.
CLEAR : gv_gjahr, gv_monat, gv_poper, gv_bukrs.
gv_bukrs = vbrk-bukrs.
IF NOT likp-wadat_ist IS INITIAL.
*- First determine the Period of the Actual GI date.
CALL FUNCTION 'FI_PERIOD_DETERMINE'
    EXPORTING
      i_budat              = likp-wadat_ist
      i_bukrs              = gv_bukrs
   IMPORTING
     E_GJAHR              = gv_gjahr
     E_MONAT              = gv_monat
     E_POPER              = gv_poper
   EXCEPTIONS
     FISCAL_YEAR          = 1
     PERIOD               = 2
     PERIOD_VERSION       = 3
     POSTING_PERIOD       = 4
     SPECIAL_PERIOD       = 5
     VERSION              = 6
     POSTING_DATE         = 7
     OTHERS               = 8.
      IF sy-subrc <> 0.
       MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ELSE.
        CLEAR : lv_gjahr, lv_monat.
        lv_gjahr = gv_gjahr.
        lv_monat = gv_monat.
*- Once period is determine check whether Period is open or not for 'D' - Customer Account
        CALL FUNCTION 'FI_PERIOD_CHECK'
          EXPORTING
            I_BUKRS                = gv_bukrs
            i_gjahr                = lv_gjahr
            i_koart                = 'D'
            i_monat                = lv_monat
         IMPORTING
           E_OPER                 = gv_oper
         EXCEPTIONS
           ERROR_PERIOD           = 1
           ERROR_PERIOD_ACC       = 2
           INVALID_INPUT          = 3
           OTHERS                 = 4.
          IF sy-subrc <> 0.
           MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                   WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ELSE.
*- Once period is determine check whether Period is open or not for 'S' - All G/L Accounts
            CALL FUNCTION 'FI_PERIOD_CHECK'
            EXPORTING
              I_BUKRS                = gv_bukrs
              i_gjahr                = lv_gjahr
              i_koart                = 'S'
              i_monat                = lv_monat
           IMPORTING
             E_OPER                 = gv_oper
           EXCEPTIONS
             ERROR_PERIOD           = 1
             ERROR_PERIOD_ACC       = 2
             INVALID_INPUT          = 3
             OTHERS                 = 4.
            IF sy-subrc <> 0.
              MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
           ENDIF.
         ENDIF.
     ENDIF.
ENDIF.
*- Check Billing Date period is closed or not
IF kom-fkdat is not initial.
clear : gv_gjahr, gv_monat, gv_poper.
*- First determine the Period of the Actual GI date.
CALL FUNCTION 'FI_PERIOD_DETERMINE'
    EXPORTING
      i_budat              = kom-fkdat
      i_bukrs              = gv_bukrs
   IMPORTING
     E_GJAHR              = gv_gjahr
     E_MONAT              = gv_monat
     E_POPER              = gv_poper
   EXCEPTIONS
     FISCAL_YEAR          = 1
     PERIOD               = 2
     PERIOD_VERSION       = 3
     POSTING_PERIOD       = 4
     SPECIAL_PERIOD       = 5
     VERSION              = 6
     POSTING_DATE         = 7
     OTHERS               = 8.
      IF sy-subrc <> 0.
       MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ELSE.
        CLEAR : lv_gjahr, lv_monat.
        lv_gjahr = gv_gjahr.
        lv_monat = gv_monat.
*- Once period is determine check whether Period is open or not for 'D' - Customer Account
        CALL FUNCTION 'FI_PERIOD_CHECK'
          EXPORTING
            I_BUKRS                = gv_bukrs
            i_gjahr                = lv_gjahr
            i_koart                = 'D'
            i_monat                = lv_monat
         IMPORTING
           E_OPER                 = gv_oper
         EXCEPTIONS
           ERROR_PERIOD           = 1
           ERROR_PERIOD_ACC       = 2
           INVALID_INPUT          = 3
           OTHERS                 = 4.
          IF sy-subrc <> 0.
           MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                   WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ELSE.
*- Once period is determine check whether Period is open or not for 'S' - All G/L Accounts
            CALL FUNCTION 'FI_PERIOD_CHECK'
            EXPORTING
              I_BUKRS                = gv_bukrs
              i_gjahr                = lv_gjahr
              i_koart                = 'S'
              i_monat                = lv_monat
           IMPORTING
             E_OPER                 = gv_oper
           EXCEPTIONS
             ERROR_PERIOD           = 1
             ERROR_PERIOD_ACC       = 2
             INVALID_INPUT          = 3
             OTHERS                 = 4.
            IF sy-subrc <> 0.
              MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
           ELSE.
            IF kom-fkdat4(2) <> likp-wadat_ist4(2).
            ENDIF.
           ENDIF.
         ENDIF.
     ENDIF.
ENDIF.
*}   INSERT
ENDFORM.
      FORM USEREXIT_FILL_VBRK_VBRP                                  *
      This userexit can be used to fill fields in VBRK and VBRP     *
      Be aware, that at this time the work areas KUAGV KURGV        *
      KUWEV and KUREV are not filled.                               *
      This form is called from FORM VBRK_VBRP_FUELLEN.              *
FORM USEREXIT_FILL_VBRK_VBRP.
Example: change Tax country
VBRK-LANDTX = T001-LAND1.
ENDFORM.
*eject

How to create a relationsship between a DB Bock and Non DB Block

Hi All,
I am working with oracle forms 10g.
I have created a Custom form. I have two block. One is a DB Block and another is control block(ie multi record blk).
I tried to create a master detail relationship between these two block.
Master block:LC_Master_BLK(DB Block).
Detail block: LC_Detail_blk(Non DB Block).
Form object navigator I click relation in Master Block and a pop up window opens and form there i select Detail block.
And i give the join condition like
LC_Master_BLK.PO_HEADER_ID=LC_Detail_blk.PO_HEADER_ID.
I have made po_header_id as primary key in my custom table,refred in my master block.
But it shows error as
FRM-15004: Error while parsing the join condtion.
Can any one tell me how to solve this.
Thanks & Regards
Srikkanth

Hi Srikkanth.M
I have two block. One is a DB Block and another is control block(ie multi record blk).this is what i call bad form design pls exchange the two blocks making ...
Master block:LC_Master_BLK(Non DB Block).
Detail block: LC_Detail_blk (DB Block).
Now to link the 2 blocks then define the join condition as follows:
:LC_Master_BLK.PO_HEADER_ID = :LC_Detail_blk.PO_HEADER_IDPls Keep in mind that the join condition specifies the relationship between items in 2 blocks db
or
one which is the master Non DB Block (to filter the display of data through user input to display the result output of data related in multi-records in the detail block.
That how u can works with the relation between two blocks as urs..
Hope this helps...
Regards,
Amatu Allah

Problem in Execute query on non-database block and database block together

Hi All,
In my form,i have
1. First block is Non-database block with one non-database item.
2. Second and third blocks are database blocks.
Now the problem is that i want to perform execute-query for all the blocks.
If the cursor is on the non-database item of 1st block and i clicks on the "Enter-query" then i am getting message " This function can not be performed here".
If i click on the item of the database block and then clicks on the "Enter-query" and then "execute-query" it's working fine.
But i don't want to do in this way.
My cursor will be on the First block only and then it should perform execute-query.
I am using this non-database item to copy value of this item to the item of the database block item.
I think i make you understand about my problem.
I am using forms 10g on Window xp.
Please help me.

Hi!
Simply create a enter-query trigger on the non-database-block:
begin
go_block ( 'database_block' );
enter_query;
end;If your search criteria is in the non-database-item in the first block,
you actually do not need the enter_query build-in.
Just create a execute-query trigger on the first block like:
begin
go_block ( 'database_block' );
execute_query;
go_item ( :System.trigger_item );
end;And in a pre-query trigger on the database-block copy the
value of your seach item into the item you want to search for.
Regards

FYI Notification getting canceled while sending notiifcation 2nd time

Hello Gurus,
I have a custom workflow which incorporates AME and AME returns 2 of FYI Receivers groups at the end. I have designed the workflow so that It get the approval group from AME and checks if thats the FYI Group or not. If its FYI Group then it sends a FYI Notification to that group and get backs to Get_Next_approver_from_AME function to get the next approval group. After regular approvals, for the 2 FYI groups which it gets at the end, It is sending the FYI notices to groups but while sending the 2nd FYI notice it is canceling the first one. I have tried all the possible solutions setting the "On Revisit" to "loop" instead of "Reset". Can anybody suggest any other solution for this?
We are on R12 and using WF Builder 2.6.3.0.1
Thanks,
Sunny.
Edited by: user13369509 on Jul 21, 2011 11:24 AM

Set the 'On Revisit' value to 'Loop' and verify the issue.
If the value is 'loop' then Workflow Engine simply re executes the pivot activity and all activities that follow in the loop, without resetting, as if they have never been executed before.

Sorting in Non-Database Block.

I have a form having a non-database block having different columns.
It is required that the user can sort the data by every columns while he is entering the data.
Please help me out.
Thanks

I have a form having a non-database block having different columns.
It is required that the user can sort the data by every columns while he is entering the data.
Please help me out.
Thanks

Forms - query into non database Block

This is the data in the table. I am querying into a non database block.Have two lines of data
1. 1062|Sanitation and Cleaning|N|1025
2. 1063|Eyewash|N|1025
go_block('qc_procedures');
first_record;
loop
Open C3;
Fetch C3 into :qc_procedures.procedure_id,
:qc_procedures.procedure_desc,
:qc_procedures.optional,
:qc_procedures.procedure_type_id;
Exit when :system.last_record = 'TRUE';
next_record;
Close C3;
End loop;
I am only able to get the first line of data

I'm not quite sure if i understand your problem.
First, you didn't post the definition of your cursor C3.
Second, if you want to populate the block using the cursor, you should loop over the cursor and not over the block, something like
Open C3;
first_record;
loop
Fetch C3 into :qc_procedures.procedure_id,
:qc_procedures.procedure_desc,
:qc_procedures.optional,
:qc_procedures.procedure_type_id;
Exit when C3%NOTFOUND;
next_record;
Close C3;Third, it would be much easier to base your block on a table or on your query (using FROM-clause-query), then there would be no need for any code.

RM-30410: Warning: Single Record property ignored for non-control block

Hi gurus,
I have one block, as oracle default behavious is that when any user enters record and during that if he/she hits down arrow key then it gets to next new record, i want to prevent this behaviour.
In other words i want that user should not enter second record and if he or she needs to enter second record after saving first then user can only do if he navigate to the form second time.
In property pallete i put yes to single record but when i compile the form it gives me following warning
FRM-30410: Warning: Single Record property ignored for non-control block Employees
Created form file C:\my_forms\employees.fmxPlease seeks help that how can i sort it out.
Thank you
Hina

if he/she hits down arrow key then it gets to next new record, i want to prevent this behaviour. Change the block's key-down and/or key-nxtrec trigger to
begin
null;
end;(or give the user a message "Key not allowed here").

LabVIEW 2011 quick drop ctrl-key shortcuts don't work

I've noticed that none of the Ctrl-Key shortcuts used in the Quick Drop menu work. For example, Ctrl-T doesn't move the terminal labels and Ctrl-R won't remove and rewire. Is there a hidden setting that I have missed?
Thanks!
CLD Certified

I am just now encountering the same problem, only renaming the INI file didn't do the trick like above. As a matter of fact, the INI key "QuickDropKeyboardShortcutMappings" doesn't even exist in either the renamed (bak) or the newly created ini file.
Since I have grown to rely on the handy QD shortcuts this is starting to really annoy me...
I have checked that I can open all the files in the respective LV version (using 2011+2013 and sometimes got these mixed up with the newly saved shortcut VIs when distributing them to all the 4 LV-Quickdrop folders (x86 and x64)).
Funny thing is, the VI lists in the QD plugins folder and the DQ window, shortcut tab, greatly differ, see pictures attached. Any hints? Otherwise I am going to reinstall since a repair didn't help either. Tried that already as well.
Attachments:
QDshortcutVIs_infolder.PNG ‏14 KB
QDshurtcutVIs_inQDwindow.PNG ‏20 KB

Why is it necessary to make the block synchronized while iteratiing

Why is it necessary to make the block synchronized while iteratiing thru Synchronization Wrappers?
here is the code sample for same:
Collection c = Collections.synchronizedCollection(myCollection);
synchronized(c) {
Iterator i = c.iterator(); // Must be in synchronized block!
while (i.hasNext())
foo(i.next());
}

If at the first place I am getting all the methods synchronized by calling
Collection c = Collections.synchronizedCollection(myCollection);
that means no two threads can enter the data structure of this collection, I am not getting how ConcurrentModificationException will be thrown while iterating thru this collection?
Can u please explain in a little depth?

Starts with 15fps and quickly drops to 1fps

I don't know what changed... it has been working fine for the past couple of years. For the past couple of months my video starts with 15fps and quickly drops to 1fps -- I still receive 15fps. . I have feeling it is either my cable provider or my Vonage strangling my bandwidth (both are the same since day one) maybe some settings were changed. When I do a speed test...up and down numbers are average or above for my cable provider.
Quicktime is set to 1.5...T1/Lan etc.
iChat bandwidth limit is set to none (tried all choices).
Imac G5 1.8 Ghz Mac OS X (10.4.9) iSight/cable/Vonage lynksys RT31P2 /Airport express

Hi jw_17,
Have a look at this page http://www.ralphjohnsuk.dsl.pipex.com/page16.html
Most likely it it is a background process.
In addition to the culprits found when Tiger came out listed on that page also open up Activity Monitor and check how many Widgets are active (shutting them down is best).
Also check if a Print Monitor is listed as most likely this is Stuck and can be Force Quit from the button top left of Activity Monitor.
The other possibility is that SpotLight is Indexing.
11:10 AM Tuesday; May 8, 2007

Since upgrading to LabVIEW 2013, every VI compiles every time I open it (including quick-drop).

Hi all. Since upgrading to LabVIEW 2013, every VI compiles every time I open it (including quick-drop). This really slows things down! Perhaps related, my system tells me I don't have permission/access to modify my LabVIEW ini. Has anyone seen similar, and/or any hints towards a solution?

Jeff-P wrote:
As a side note, LabVIEW.ini is a file that gets generated by LabVIEW when it is launched if the file does not exist. So if you are missing the 32-bit ini file, launch 32-bit LabVIEW and that file should be created.
I thought that the message: "Perhaps related, my system tells me I don't have permission/access to modify my LabVIEW ini" might indicate that the labview.ini file cannot even be created... strange...
LabVIEW Champion . Do more with less code and in less time .

Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?

Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do? I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.

Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men

HOW TO CREATE MULTIPLE RECORDS IN A NONE DATABASE BLOCK?

I have a Form where I have a none database block with unbound items. The block
has 10 records. In the when-new-block instance I run a query by which I would
like to fill up the block with data. The code fragment looks like the
following:
begin
declare
tmp_curr_rec_id number;
begin
-- a hibak kiolvasasa
for c_hibak in ( select h.*, h.rowid
from hibak h
where 1=1 -- WF - Ide kerul a szurofeltetel
order by bejelentes_datum asc
) loop
-- bemasoljuk az adatokat az unbound item-ekbe
:mc_adat.ub_azonosito := c_hibak.azonosito;
:mc_adat.ub_verzio_letrehozas_datum :=
c_hibak.verzio_letrehozas_datum;
:mc_adat.ub_bejelento := c_hibak.bejelento;
:mc_adat.ub_bejelentes_datum := c_hibak.bejelentes_datum;
:mc_adat.ub_wf_verzio_csomopont :=
c_hibak.wf_verzio_csomopont;
:mc_adat.ub_wf_utolso_esemeny_szoveg :=
c_hibak.wf_utolso_esemeny_szoveg;
:mc_adat.ub_hiba_leiras := c_hibak.hiba_leiras;
:mc_adat.ub_hiba_hely := c_hibak.hiba_hely;
:mc_adat.ub_rekord_jelleg := 'H';
:mc_adat.ub_rowid := c_hibak.rowid;
-- beallitjuk a rekordot-ot olyanra, mintha semmi nem valtozott
volna
-- nem szeretnenk a form bezaraskor mindenfele figyelmezteteseket
-- olvasni a kepernyon
tmp_curr_rec_id := get_block_property( :system.current_block,
current_record );
set_record_property( tmp_curr_rec_id, :system.current_block,
status, new_status );
create_record;
end loop;
end;
end;
The block's update allowed, insert allowed, delete allowed property is set to
true.
The result of the code above is that only the last record fetched shows up in
the block. The problem is - as I found out - is that aech record is fetched,
the values are copied to the block items, but the create_record built-in
command would not move the cursor to the next row.
Can some one please help me with this?
TIA,
Tamas Szecsy

The problem was with the following code segment:
tmp_curr_rec_id := get_block_property( :system.current_block, current_record );
set_record_property( tmp_curr_rec_id, :system.current_block, status, new_status );
After omitting these two lines, the code worked properly.
Thansk for all whoe replied.
Regards,
Tamas

How do I troubleshoot "A non-SQL error occurred while requesting a connection from DSN ." errors?

Hello,
Last week we began seeing some timeout errors, but today there have been much more of them and I’m not sure how to proceed in troubleshooting.
We have 2 load balanced app servers:
Windows Server 2008 R2 (virtualized)
ColdFusion 8, Enterprise
And a database server:
Windows Server 2008 R2
SQL 2012
The error in “coldfusion-out.log” is:
A non-SQL error occurred while requesting a connection from <DSN>.
Timed out trying to establish connection
This only happens on one of the web servers, but it happens more frequently when the app servers is under a heavier load. Most of the day it works fine, but 4 or 5 times throughout the day we will have 1 – 15 requests timeout in a row(always varies), and then things will be fine again w/out restarting or doing anything.
The database server is much more powerful than the app server, and I don't believe the issue involves long running queries or the DB server being under heavy load.
I’m a DBA who is temporarily handling System Admin responsibilities, and I’m not sure how to further trouble shoot this. I just started some pings going from the app server to the database using IP and the listeners name. How else can I prepare for the next time it happens. What other logs should I be looking at to gain some insight? Are there PerfMon counters I could use to help troubleshoot?
Thanks for your help!

I've had several timeout since the pings were started. Got a some response times > 1ms (nothing greater than 7 or 8ms), but no timeouts.

Quick Drop - Non UI blocking / cancel while first loading

Similar Messages

Maybe you are looking for