Quick query regarding upgrade work

I live in pevensey bay in east sussex. We recieved an email yesterday saying there would be upgrade work taking place at some point today, and we would lose our broadband and phones for a while. we're on option 2 for broadband on the up to 8MB plan. We usually get about 2MB.
This may be completely unrelated, but we had a huge storm earlier. The homehub lost sync for a few minutes, and now it's come back up, it's got a downstream speed of 2,624 Kbps. Our normal speed is about 1,097 Kbps, but this drops down to about 512Kbps after a few days.
The speed increase is very strange, and it seems to be staying at that speed, which it has NEVER done before.
Does anyone (preferably from bt) know whether this speed increase is anything to do with the work we were told would take place today, or is it completely unrelated?
I would try rebooting the homehub to see if it syncs above 2MB still, but I don't want to risk the possibility of the speed lowering again...lol.

There's an alternative explanation. A poor connection somewhere on the line will cause a high resistance ("HR") fault. A characteristic of this is bursts of noise which force the router to resync at progressively lower speeds, until a stable rate is established. A storm can temporarily clear an HR fault by movement of the overhead wiring (this happened to me). Sadly, the fault will come back again. Another characteristic of an HR fault is a rustling or crackling noise in the background of telephone calls. Try this: dial 17070, pick option 2, (BT Line Test, quiet line) and listen. You should hear almost nothing. If you DO hear noises, report your phone faulty as "noisy line" - that will also be causing the slow broadband.
Note that if the router syncs at a very low speed, it WON'T restore itself if the line condition improves. You have to force a resync yourself (reboot or just disconnect the line for a few seconds). That's just the way the system works....

Similar Messages

Query regarding Job work senario in India

dear all,
i am facing a strange problem
i m having some Customer who sent material on (4)(5) a or 57F4 challan for job work. In that case only labour charges are charged no excise duty will charged, but how i will take the material "in" in to system,from which transaction code and which movement type i used. Also the storage location should be different for that ?
It Dose not hit the RG1 Register.
can any body help me to solve this
please please solve the problem
regards
pankaj
[email protected]

Dear Pankaj
1. Then i will suggest to use DIEN Material type , which will not be valuated, as
it is customer's stock
2. Then you recieve the material from Customer, which is non-valuated.
This you can do in MIGO.
3 Then you make a production order with BOM, where component will
be material given by customer and FG will be Material you are going
to send along with byproducts.
3. Once material is process(or produced) then you can make a seperate jobwork sales order type and deliver it
4. Finally bill it for services rendered.
If you use Services you will not get stock of customer's material in the system.
But if you use non valuated material you can get the stock. So ask if stock
is required???
As no excise entries are required you need no worry about CIN part
I hope it is clear....
Regards
Jitesh

Query regarding UPGRADE SAP NW BI 7.0 to BW 7.3

Hi,
What are the prerequests needed to upgrade from NW7.0(EHP1) BI system to new SAP BW 7.3 ? is it possible?
if YES, what are things need to taken care. if NO what are the prerequest need to be done in existing NW 7.0 (EHP1) BI system?
Your response is highly appreciated.

Hello,
If you mean the BI Content then you can check the pre-requisites from the Info file from the download path
Regards,
Anand

Query regarding upgrading protection mode in a data guard

I am using Oracle 10g in Linux platform
Consider that I have a logical standby and a physical standby and now I want to upgrade the protection mode of physical standby but want the logical standby to retain the protection mode .
According to the Oracle documentation they have specified that the following statement has to be issued from primary to upgrade protection mode of a standby
SQL > Alter database set standby database to maximum availability;So to which standby this statement will refer to, whether logical standby or physical standby?

Hi,
What you want to do is very possible. Please not however the protection mode DOES NOT apply to a standby when you say a database has a certain protection mode, it applies to the primary.
First to be in maximum availability you have to issue the command you state, and that applies to the primary, it is now in maximum availability but to get there it must have ONE standby that uses LGWR SYNC as the transport mechanism with AFFIRM.
You can also have other standby's running from this primary, that DO NOT have to use LGWR SYNC, but can use the other available tranport mechanisms.
This is explained here:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/protection.htm#CHDEDGIF
cheers,
jason.
http://jarneil.wordpress.com

Query regarding upgrading speed after phone call.

Hi
I'm hoping someone can help point me in the right direction as I'm not sure about the following.
Around January this year I went broadband and received a 7mb connection and noticed that I was due to be upgraded in my area to 11mb in March and the sales confirmed It would be upgraded when it arrives.
So yesterday I did a check and it says 11mb now through BT check site, so I have checked my connection through the speed test and hub.
Speed test results.
Download speed achieved during the test was - 6104 Kbps
For your connection, the acceptable range of speeds is 600-7150 Kbps.
Additional Information:
Your DSL Connection Rate :8128 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 7150 Kbps.
My home hub records this.
Line state
Connected
Connection time
0 days, 17:31:56
Downstream
8,128 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Fast
Noise margin (Down/Up)
4.6 dB / 22.0 dB
Line attenuation (Down/Up)
29.0 dB / 18.0 dB
Output power (Down/Up)
19.8 dBm / 12.2 dBm
It has ip profile at 7150Kpbs which I take is my locked connection speed.
I have phoned the help line and a gentleman told me all is ok and I'm upgraded to the new speed yet my ip and DSL connection rate are not the 11mb so I was hoping or wondering if this need to be changed and the gentleman may not have understood what I was trying to say.
Do BT just upgrade when your area has been done or do I have to phone again to double check I now have the new improved speed?
I would be very grateful for any help on the above.
Mhis
Solved!
Go to Solution.

Just to say I phoned the number who then put me through to tech team who then told me that even though BT site shows 11mb now in my area on my number it maybe until September when the upgrade is available.
The young lady gave me another number and told me they would be able to tell me when the upgrade would be likely and the number was 0800 0853608.
I gave this number a ring and I believe its BT wholesales and a nice chap simply said he can't help me with that.
So I guess even though the checker here BT check your speed shows me 11mb now it must be wrong as its not available. A little bit confused over that!

Regarding Upgrade

Hi Guru's,
I have two doubts regarding upgrade work.
1. when we are doing unicode remediation for the obslelute function modules, if in older system if they handling any exceptions how we can handle those in ECC new system. I mean to say if they are displaying some messages according to the exception how we can handle??.
2.Describe field statement with addition in CHARACTER MODE or BYTE MODE?..When to use CHARACTER MODE and when to use BYTE MODE??
Please clarify..
Thanks & Regards,
SASTRY R.

Hello,
1. When replacing a obsolete function module, if any exceptions are handled, you will have to manually map those exceptions in the newer function module and handle accordingly.
2. The type of the field on which the DESCRIBE statement is used will determine if it should be a CHARACTER or BYTE mode. If the type is C,N,D,T,S go for character mode else BYTE mode.
Vikranth

Basic query regarding work-area and select query

hi
dear sdn members,
thanks too all for solving all my query's up till now
i am stuck in a problem need help
1) why basically work-area has been used ? the sole purpose
2) different types of select query ? only coding examples
note: no links pls
regards,
virus

hi,
Work Area
Description for a data object that is particularly useful when working with internal tables or database tables as a source for changing operations or a target for reading operations.
WORKAREA is a structure that can hold only one record at a time. It is a collection of fields. We use workarea as we cannot directly read from a table. In order to interact with a table we need workarea. When a Select Statement is executed on a table then the first record is read and put into the header of the table and from there put into the header or the workarea(of the same structure as that of the table)of the internal table and then transferred top the body of the internal table or directly displayed from the workarea.
Each row in a table is a record and each column is a field.
While adding or retrieving records to / from internal table we have to keep the record temporarily.
The area where this record is kept is called as work area for the internal table. The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
.g.
data: begin of itab occurs 10,
ab type c,
cd type i,
end of itab. " this table will have the header line.
data: wa_itab like itab. " explicit work area for itab
data: itab1 like itab occurs 10. " table is without header line.
The header line is a field string with the same structure as a row of the body, but it can only hold a single row.
It is a buffer used to hold each record before it is added or each record as it is retrieved from the internal table. It is the default work area for the internal table.
With header line
SELECT.
Put the curson on that word and press F1 . You can see the whole documentation for select statements.
select statements :
SELECT result
FROM source
INTO|APPENDING target
[[FOR ALL ENTRIES IN itab] WHERE sql_cond]
Effect
SELECT is an Open-SQL-statement for reading data from one or several database tables into data objects.
The select statement reads a result set (whose structure is determined in result ) from the database tables specified in source, and assigns the data from the result set to the data objects specified in target. You can restrict the result set using the WHERE addition. The addition GROUP BY compresses several database rows into a single row of the result set. The addition HAVING restricts the compressed rows. The addition ORDER BY sorts the result set.
The data objects specified in target must match the result set result. This means that the result set is either assigned to the data objects in one step, or by row, or by packets of rows. In the second and third case, the SELECT statement opens a loop, which which must be closed using ENDSELECT. For every loop pass, the SELECT-statement assigns a row or a packet of rows to the data objects specified in target. If the last row was assigned or if the result set is empty, then SELECT branches to ENDSELECT . A database cursor is opened implicitly to process a SELECT-loop, and is closed again when the loop is ended. You can end the loop using the statements from section leave loops.
Up to the INTO resp. APPENDING addition, the entries in the SELECTstatement define which data should be read by the database in which form. This requirement is translated in the database interface for the database system´s programming interface and is then passed to the database system. The data are read in packets by the database and are transported to the application server by the database server. On the application server, the data are transferred to the ABAP program´s data objects in accordance with the data specified in the INTO and APPENDING additions.
System Fields
The SELECT statement sets the values of the system fields sy-subrc and sy-dbcnt.
sy-subrc Relevance
0 The SELECT statement sets sy-subrc to 0 for every pass by value to an ABAP data object. The ENDSELECT statement sets sy-subrc to 0 if at least one row was transferred in the SELECT loop.
4 The SELECT statement sets sy-subrc to 4 if the result set is empty, that is, if no data was found in the database.
8 The SELECT statement sets sy-subrc to 8 if the FOR UPDATE addition is used in result, without the primary key being specified fully after WHERE.
After every value that is transferred to an ABAP data object, the SELECT statement sets sy-dbcnt to the number of rows that were transferred. If the result set is empty, sy-dbcnt is set to 0.
Notes
Outside classes, you do not need to specify the target area with INTO or APPENDING if a single database table or a single view is specified statically after FROM, and a table work area dbtab was declared with the TABLES statement for the corresponding database table or view. In this case, the system supplements the SELECT-statement implicitly with the addition INTO dbtab.
Although the WHERE-condition is optional, you should always specify it for performance reasons, and the result set should not be restricted on the application server.
SELECT-loops can be nested. For performance reasons, you should check whether a join or a sub-query would be more effective.
Within a SELECT-loop you cannot execute any statements that lead to a database commit and consequently cause the corresponding database cursor to close.
SELECT - result
Syntax
... lines columns ... .
Effect
The data in result defines whether the resulting set consists of multiple rows (table-like structure) or a single row ( flat structure). It specifies the columns to be read and defines their names in the resulting set. Note that column names from the database table can be changed. For single columns, aggregate expressions can be used to specify aggregates. Identical rows in the resulting set can be excluded, and individual rows can be protected from parallel changes by another program.
The data in result consists of data for the rows lines and for the columns columns.
SELECT - lines
Syntax
... { SINGLE }
| { { } } ... .
Alternatives:
1. ... SINGLE
2. ... { }
Effect
The data in lines specifies that the resulting set has either multiple lines or a single line.
Alternative 1
... SINGLE
Effect
If SINGLE is specified, the resulting set has a single line. If the remaining additions to the SELECT command select more than one line from the database, the first line that is found is entered into the resulting set. The data objects specified after INTO may not be internal tables, and the APPENDING addition may not be used.
An exclusive lock can be set for this line using the FOR UPDATE addition when a single line is being read with SINGLE. The SELECT command is used in this case only if all primary key fields in logical expressions linked by AND are checked to make sure they are the same in the WHERE condition. Otherwise, the resulting set is empty and sy-subrc is set to 8. If the lock causes a deadlock, an exception occurs. If the FOR UPDATE addition is used, the SELECT command circumvents SAP buffering.
Note
When SINGLE is being specified, the lines to be read should be clearly specified in the WHERE condition, for the sake of efficiency. When the data is read from a database table, the system does this by specifying comparison values for the primary key.
Alternative 2
Effect
If SINGLE is not specified and if columns does not contain only aggregate expressions, the resulting set has multiple lines. All database lines that are selected by the remaining additions of the SELECT command are included in the resulting list. If the ORDER BY addition is not used, the order of the lines in the resulting list is not defined and, if the same SELECT command is executed multiple times, the order may be different each time. A data object specified after INTO can be an internal table and the APPENDING addition can be used. If no internal table is specified after INTO or APPENDING, the SELECT command triggers a loop that has to be closed using ENDSELECT.
If multiple lines are read without SINGLE, the DISTINCT addition can be used to exclude duplicate lines from the resulting list. If DISTINCT is used, the SELECT command circumvents SAP buffering. DISTINCT cannot be used in the following situations:
If a column specified in columns has the type STRING, RAWSTRING, LCHAR or LRAW
If the system tries to access pool or cluster tables and single columns are specified in columns.
Note
When specifying DISTINCT, note that you have to carry out sort operations in the database system for this.
SELECT - columns
Syntax
| { {col1|aggregate( col1 )}
{col2|aggregate( col2 )} ... }
| (column_syntax) ... .
Alternatives:
1. ... *
2. ... {col1|aggregate( col1 )}
{col2|aggregate( col2 )} ...
3. ... (column_syntax)
Effect
The input in columns determines which columns are used to build the resulting set.
Alternative 1
Effect
If * is specified, the resulting set is built based on all columns in the database tables or views specified after FROM, in the order given there. The columns in the resulting set take on the name and data type from the database tables or views. Only one data object can be specified after INTO.
Note
If multiple database tables are specified after FROM, you cannot prevent multiple columns from getting the same name when you specify *.
Alternative 2
... {col1|aggregate( col1 )}
{col2|aggregate( col2 )} ...
Effect
A list of column labels col1 col2 ... is specified in order to build the resulting list from individual columns. An individual column can be specified directly or as an argument of an aggregate function aggregate. The order in which the column labels are specified is up to you and defines the order of the columns in the resulting list. Only if a column of the type LCHAR or LRAW is listed does the corresponding length field also have to be specified directly before it. An individual column can be specified multiple times.
The addition AS can be used to define an alternative column name a1 a2 ... with a maximum of fourteen digits in the resulting set for every column label col1 col2 .... The system uses the alternative column name in the additions INTO|APPENDING CORRESPONDING FIELDS and ORDER BY. .
Column labels
The following column labels are possible:
If only a single database table or a single view is specified after FROM, the column labels in the database table - that is, the names of the components comp1 comp2... - can be specified directly for col1 col2 ... in the structure of the ABAP Dictionary.
If the name of the component occurs in multiple database tables of the FROM addition, but the desired database table or the view dbtab is only specified once after FROM, the names dbtab~comp1 dbtab~comp2 ... have to be specified for col1 col2 .... comp1 comp2 ... are the names of the components in the structure of the ABAP Dictionary.
If the desired database table or view occurs multiple times after FROM, the names tabalias~comp1 tabalias~comp2 ... have to be specified for col1 col2 .... tabalias is the alternative table name of the database table or view defined after FROM, and comp1 comp2 ... are the names of the components in the structure of the ABAP Dictionary.
The data type of a single column in the resulting list is the datatype of the corresponding component in the ABAP Dictionary. The corresponding data object after INTO or APPENDING has to be selected accordingly.
Note
If multiple database tables are specified after FROM, you can use alternative names when specifying single columns to avoid having multiple columns with the same name.
Example
Read specific columns of a single row.
DATA wa TYPE spfli.
SELECT SINGLE carrid connid cityfrom cityto
INTO CORRESPONDING FIELDS OF wa
FROM spfli
WHERE carrid EQ 'LH' AND connid EQ '0400'.
IF sy-subrc EQ 0.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDIF.
Alternative 3
... (column_syntax)
Effect
Instead of static data, a data object column_syntax in brackets can be specified, which, when the command is executed, either contains the syntax shown with the static data, or is initial. The data object column_syntax can be a character-type data object or an internal table with a character-type data type. The syntax in column_syntax, like in the ABAP editor, is not case-sensitive. When specifying an internal table, you can distribute the syntax over multiple rows.
If column_syntax is initial when the command is executed, columns is implicitly set to * and all columns are read.
If columns are specificied dynamically without the SINGLE addition, the resulting set is always regarded as having multiple rows.
Notes
Before Release 6.10, you could only specify an internal table with a flat character-type row type for column_syntax with a maximum of 72 characters. Also, before Release 6.10, if you used the DISTINCT addition for dynamic access to pool tables or cluster tables, this was ignored, but since release 6.10, this causes a known exception.
If column_syntax is an internal table with header line, the table body and not the header line is evaluated.
Example
Read out how many flights go to and from a city. The SELECT command is implemented only once in a sub-program. The column data, including aggregate function and the data after GROUP BY, is dynamic. Instead of adding the column data to an internal l_columns table, you could just as easily concatenate it in a character-type l_columns field.
PERFORM my_select USING `CITYFROM`.
ULINE.
PERFORM my_select USING `CITYTO`.
FORM my_select USING l_group TYPE string.
DATA: l_columns TYPE TABLE OF string,
l_container TYPE string,
l_count TYPE i.
APPEND l_group TO l_columns.
APPEND `count( * )` TO l_columns.
SELECT (l_columns)
FROM spfli
INTO (l_container, l_count)
GROUP BY (l_group).
WRITE: / l_count, l_container.
ENDSELECT.
ENDFORM.
SELECT - aggregate
Syntax
... { MAX( col )
| MIN( col )
| AVG( col )
| SUM( col )
| COUNT( DISTINCT col )
| COUNT( * )
| count(*) } ... .
Effect
As many of the specified column labels as you like can be listed in the SELECT command as arguments of the above aggregate expression. In aggregate expressions, a single value is calculated from the values of multiple rows in a column as follows (note that the addition DISTINCT excludes double values from the calculation):
MAX( col ) Determines the maximum value of the value in the column col in the resulting set or in the current group.
MIN( col ) Determines the minimum value of the content of the column col in the resulting set or in the current group.
AVG( col ) Determines the average value of the content of the column col in the resulting set or in the current group. The data type of the column has to be numerical.
SUM( col ) Determines the sum of the content of the column col in the resulting set or in the current group. The data type of the column has to be numerical.
COUNT( DISTINCT col ) Determines the number of different values in the column col in the resulting set or in the current group.
COUNT( * ) (or count(*)) Determines the number of rows in the resulting set or in the current group. No column label is specified in this case.
If you are using aggregate expressions, all column labels that are not listed as an argument of an aggregate function are listed after the addition GROUP BY. The aggregate functions evaluate the content of the groups defined by GROUP BY in the database system and transfer the result to the combined rows of the resulting set.
The data type of aggregate expressions with the function MAX, MIN or SUM is the data type of the corresponding column in the ABAP Dictionary. Aggregate expressions with the function AVG have the data type FLTP, and those with COUNT have the data type INT4. The corresponding data object after INTO or APPENDING has to be selected accordingly.
Note the following points when using aggregate expressions:
If the addition FOR ALL ENTRIES is used in front of WHERE, or if cluster or pool tables are listed after FROM, no other aggregate expressions apart from COUNT( * ) can be used.
Columns of the type STRING or RAWSTRING cannot be used with aggregate functions.
When aggregate expressions are used, the SELECT command makes it unnecessary to use SAP buffering.
Null values are not included in the calculation for the aggregate functions. The result is a null value only if all the rows in the column in question contain the null value.
If only aggregate expressions are used after SELECT, the results set has one row and the addition GROUP BY is not necessary. If a non-table type target area is specified after INTO, the command ENDSELECT cannot be used together with the addition SINGLE. If the aggregate expression count( * ) is not being used, an internal table can be specified after INTO, and the first row of this table is filled.
If aggregate functions are used without GROUP BY being specified at the same time, the resulting set also contains a row if no data is found in the database. If count( * ) is used, the column in question contains the value 0. The columns in the other aggregate functions contain initial values. This row is assigned to the data object specified after INTO, and unless count( * ) is being used exclusively, sy-subrc is set to 0 and sy-dbcnt is set to 1. If count( *) is used exclusively, the addition INTO can be omitted and if no data can be found in the database, sy-subrc is set to 4 and sy-dbcnt is set to 0.
if helpful reward points

How to implement Quick Query and Saved Searches in ADF?

We are using 11gR2 ADF.
The requirement is to enable Quick Search and save the Searches.
In the Oracle ADF documentation, it is mentioned that
- Create a view with view criteria named.
- In the .jspx drag and drop the view criteria and Select Quick Query
Upon doing the above, we see that a Search panel is getting created, but with a message 'No Search Fields Added'.
In the named view criteria, Under 'UI Hints' we have set
-- execution mode as Both
-- Search region mode is Basic
-- Show Operators in Basic
Under 'Criteria Definition'
the attributes are added in a group with OR condition.
Thanks for your reply. Oracle ADF developer guide does not help!!
If you have any other documentation that helps in implementing this Quick Query and Saved Search, your help is greatly appreciated.

Set the following on your af:query component
SaveQueryMode = hidden
ModeChangeVisible = false
This should work for you ..
Regards,

Excel 2010 MS Query is not working

Hi, I am in the process of upgrading all my Excel 2003 spreadsheets to Excel 2010. I am running into problem with the MS Query. Spreadsheets have MS Query linking to MS database. However, when I open some of the spreadsheets, the MS Query
is not working ie. the blue circle keeps turning and then not responding. It is very weird that this MS Query is working fine with some spreadsheets but not couple and they are all linking to the same database except a small different in criteria. I
tried to re-create the Query in the spreadsheet in Excel 2010 by going to Data>From Other Sources>From Microsoft Query and select the database. Once I set up the criteria and click Return data, the Query gets stuck.
Please help! Any comments/suggestions will be appreciated.
Thanks

Hi,
There are many possible causes that can crash MSQuery in Excel 2010.
First, please make sure we have installed the latest Office 2010 and Windows patches.
Second, Please read the Blog, it explains one typical crash scenario.
=====
AppName: msqry32.exe AppVer: 14.0.4750.1000 ModName: msvcr90.dll
There are several possible resolution you can try to resolve the above crash:
1. When you launch MS Query, just disable the option "Validate queries before saving or returning data", this is the fifth box in the options menu.
The only problem is that if you have made any mistake in your query, you'll only be noticed when receiving the data in excel.
2. Repair all the keys into registry at the following place:
[HKEY_CURRENT_USER\Software\ODBC\ODBC.INI\ODBC]
For example:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\ODBC\ODBC.INI\ODBC]
"TraceFile"="C:\\DOCUME~1\\...USERNAME...\\IMPOST~1\\Temp\\SQL.LOG"
"TraceDll"="C:\\WINDOWS\\system32\\odbctrac.dll"
http://blogs.technet.com/b/asiasupp/archive/2011/11/07/msquery-randomly-crashed.aspx
=====
Third, start the Excel 2010 with
safe mode, it helps us confirm if some add-ins cause this issue.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in
Office programs.

Query regarding moving components

I have a JPanel (call it panel1) in another JPanel which has setlayout(null).
i want to be able to "drag" around panel1 in the other panel.
i used a quick method of adding a MouseMotionListener to panel1, and under mouseDrag(mouseevent e) had the panel just reset its setLocation to the current getX getY coordinates.
This method does not work well, with the panel flickering abit, and not following the mouse too well, and even at some points jumping to a random location.
Whats the best way of achieving this?
thanks for any help in advance

Hi,
Thank you very much for the response. I have a query regarding the same. If i am making changes only in one single report and i am moving it to the quality. Now again i am making changes in the same report and saving it in a different request and moving it to the production. in this case, i wanted to know whether the whole changes made in the first and second request will reflect in the production or only the 2nd request's change will only reflect (since it is only a single report. there is no include in the program)
Kindly send ur suggestions.
Best regards,
John

Query regarding Insurance of the objects in plant

Dear Sir,
            In my Implemenatation project i have the query regarding the insurance of the fleet object(Transporting Vechle) and Life insurance.
     As th eprocedure is when the object's insurance is finished the Note is sent by the respective department head to MD and finance department.Later it is aproved by MD and request is forwarded to finance dept and later the finance dept issue the cheque to the insurance Company.
                  even During Breakdown(Accident) of the Vechile the Note is sent and same procedure is followed as above please let me know the standard SAP Procedure that i have to use in SAP so that Transaction would be Easy for me and my client.
Quick Asnwer/Valuable answer will be awarded good point s
hope the answer will reached very soon
Regards
Girish

Hi,
This should work:
select table_name, owner from dba_tab_cols
where table_name = 'EMP'
and column_name = 'JOB'
and column_id != 3;//Johan

Bex Query is not working in portal

Dear Experts,
i have uploaded BI master role into portal, By default Bex Queries are assgined to Master Role. when I clcik on preview for particular Bex Query, it's working fine. but after assigning the master role to end user, that same Bex Query is not working. it's showing Below error..
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 05:22_18/08/10_0002_7116150
Refer to the log file for details about this exception.
please give me suggetions...
Regards,
VENU

Hi Venu ,
Can you please check the logs for details - http(s):<host>:<port>/nwa . This may be a permissions issue . Check if the iview has read permission for everyone group and then test . Also post the error details here .
Regards
Mayank

Broadband drops out after bt upgrade work in area

Hope someone can help because the call centre is helpful but unfortunetly the help they give me is what I have tried before.
On Wednesday 17th August I received an ewmail from the BT Migration team stating that upgrade work would be taking place at my local exchange and that my phone and broadband would be out for 10 minutes on this day. The work got carried out and I received a email saying this and that my broadband would take about ten days to settle down.
Now we are about 2 months since this wok and my once reliable broadband (have hardly ever had to restart the box in the past nearly 10 years) is dropping everyday and if I do restart the box I either get on to the internet then it drops out again or I don't, getting frustrated for paying for something I can't use.
My HomeHub the original white model, only shows a solid broadband icon and flashing wireless and sometimes flashing data icon on the front of it but no internet.
I have tried using the bt broadband desktop help but it says my line is okay and I have checked all the microfilters that are attached and everything seems fine there. Phone the number at the end of the desktop help wizard and get told to try the same thing it suggests.
I have read on this forum that some other bt customers have had similar problems after upgrades and it turned out to be the homehub that was at fault.
Can anyone give me any advice in sorting this please or can anyone confirm that it is the homehu bthe issue is with and if so how to get a free replacement from bt.
Solved!
Go to Solution.

Hi Andy81,
Welcome to the forums. Yes you would be correct in the fact that the White Home Hub doesn't have the best reputation on ADSL2+ lines simply because of its age. I would advise you to contact the mods, you can do that by following this link: http://bt.custhelp.com/app/contact_email/c/4951 and ask for a replacement hub, although you would have to pay if you are out of contract. Do you know if you're out of contract?
Regards Edd
Check your Line
BT Speedtester

Select query is not working in BDC Program

Hi,
I am working in BDC for update valuation class for T-code mm01.Actually In this BDC i am using two recoding based on material type.
i am using two internal table : I_DATA and ITAB
Use I_DATA to hold excle data in which material No, plant , valuation type , valuation No. and ITAB for material No, material type Only.
So, i am fetching material Type ( MARA-MTART ) through select query. But Select query is not working. and also i did check MARA table according that Material Number then material no. exit in Mara Table.
Note : at run time I_DATA have 1 row but ITAB have 0 row ....
DATA: BEGIN OF I_DATA OCCURS 0,
MATNR TYPE MARA-MATNR,
WERKS TYPE MARC-WERKS,
BWTAR TYPE RMMG1-BWTAR,
VERPR TYPE BMMH1-VERPR,
BKLAS TYPE MBEW-BKLAS,
STATUS TYPE C,
END OF I_DATA.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
MTART LIKE MARA-MTART,
END OF ITAB.
Loop at I_DATA.
select matnr mtart from mara into table itab where matnr = I_DATA-matnr.
endloop.
Guide me..........

If you use your
Loop at I_DATA.
select matnr mtart from mara into table itab
    where matnr = I_DATA-matnr.
endloop.
At end of loop, itab will only contain the result of the last select, so use a
Loop at I_DATA.
select matnr mtart from mara APPENDING table itab
    where matnr = I_DATA-matnr.
endloop.
better
if I_DATA[] is not initial.
select matnr mtart from mara into table itab
    FOR ALL ENTRIES IN i_data where matnr = i_data-matnr.
endif.
Some Remarks
- If actually required (where does I_DATA come from, is it an external format, you need the internal value to use in SELECT statement), check via SE11 the correct [conversion exit|http://help.sap.com/saphelp_nw04/helpdata/en/35/26b217afab52b9e10000009b38f974/content.htm] associated with domain MATNR (Is it truly ALPHA, and not something like MATN1, so [CONVERSION_EXIT_MATN1_INPUT|http://www.sdn.sap.com/irj/scn/advancedsearch?query=conversion_exit_matn1_input])
- You could try to use BAPI like [BAPI_MATERIAL_SAVEDATA|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_material_savedata] and not BDC
Regards,
Raymond

Query regarding G/LAccounts in psoting

Hi Experts,
I have one query regarding PCP0.
After executing PCP0,If We double click on the posting document we can see the number of G/L accounts in that posting Document.If we double click on each G/L Account it shows all the revision information indetail for all payments cumulated into that particular G/L Account.
Some of the G/L's are appearing as single line in the posting document and if we double click for the revision information it is showing all the Wagetypes with personnel numbers and the total of each wagetype.
Some of the G/L's we can see Multiple times for each individual.
Can any one please explain where does we set up the the revision information for the G/L Accounts .
Appreciate If anyone can help to know this information.
Thanks & Regards,
Sandhya.

Hi Gopal,
Counting class are assigned to the Periodic work Schedule 1 to 9 are just arbitart sequence numbers and have no meaning in general they are used for linking Pweriodic Work schedules with differences.
You can use the class for absence and attendance counting to specify different methods of counting according to the period work schedule.
They have no other meaning apart from that.
Thanks and Regards
Swati

Quick query regarding upgrade work

Similar Messages

Maybe you are looking for