Quick Time 7 and Quick Time Pro Functionality Issue

I purchased Quick Time Pro a few years ago when Quick Time was another version. Quick Time is needed for Premiere Elements. With the current Quick Time 7 comes an issue: my Quick Time Pro will not function in Quick Time 7 because the Quick Time Pro I only functions in earlier Quick Time versions. I either have to purchase a new Quick Time Pro product key to run in Quick Time 7 or run an earlier version of Quick Time to have my current Quick Time Pro function properly. Does anyone else have this issue?

I have not. Historically, the Pro unlock will work for all versions in a series, i.e. Pro version 6 will work in all versions in the 6 series. I got my Pro version 7 at about 7.2.x, and it has worked fine with all through version 7.5.5, where I am now. The current version is 7.6.6, and I have heard of no issues with a Pro version 7 unlock not working in any versions later than my 7.5.5.
Seems strange, but then maybe Apple has departed from history?
Good luck,
Hunt

Similar Messages

In Material Master Screen,functionally what is Safety time and safety time

In Material Master Screen,functionally what is Safety time and safety time indicator in the MRP Screen.Pls explain its functionality

Hi,
The safety time / actual range of coverage ensures that the planned warehouse stock covers the requirements of a defined number of days. It therefore serves as a time float and thus works alongside the safety stock, which acts as quantity float.
The system simulates bringing the requirements forward by the specified number of days and the planning for the receipts, created for these requirements in the planning run, is also brought forward by this number of days.
Prerequisites
·   You have set the Safety Time indicator in the material master record (MRP 2 View) to define whether the safety time is only to apply to independent requirements or to all requirements.
·    In the material master record (MRP 2 View), in the Safety Time/Actual Range of Coverage field, you have entered the number of workdays by which the requirements are to be brought forward.
·    If, in addition to this actual range of coverage, you also want to define a different number of workdays in certain periods or a safety time less than one day then, in Customizing for MRP in the activity Define Period Profile for Safety Time/Actual Range of Coverage you can define a period profile and assign it to the material in the material master record.
Regards,
Vijay

In SharePoint Calendar lists, fields [Start Time] and [End Time] do not exist at the Site Column level.

<header style="box-sizing:border-box;color:#777777;line-height:1;font-size:13px;padding-right:46px;margin-bottom:3px;font-family:'Helvetica Neue', arial, sans-serif;">
</header>
I'm doing SP app development and have the following problem.
I need to check Start time and End Time in SharePoint Calendar using CAML query and then add a new event to Calendar list using the Start time and End Time that user has entered in 2 datapickers
in the form.
function AddCalendarListItems() {
var SD = document.getElementById("datepicker1").value;
var SThh = document.getElementById("St1").value;
var STmm = document.getElementById("St2").value;
var ED = document.getElementById("datepicker2").value;
var EThh = document.getElementById("Et1").value;
var ETmm = document.getElementById("Et2").value;
var T = document.getElementById("Title").value;
var S1 = SThh;
SD = SD.slice(6, 10) + "-" + SD.slice(0, 2) + "-" + SD.slice(3, 5) + "T" + SThh + STmm + ":00Z";
ED = ED.slice(6, 10) + "-" + ED.slice(0, 2) + "-" + ED.slice(3, 5) + "T" + EThh + ETmm + ":00Z";
//alert("SD= " + SD + " , ED= " + ED);
var siteUrl = SiteCollurl + "/SharePointApp11";
var clientContext = new SP.ClientContext(siteUrl);
var oList = clientContext.get_web().get_lists().getByTitle('Calendar');
var ListItemCInfo = new SP.ListItemCreationInformation();
var newEvent = oList.addItem(ListItemCInfo);
newEvent.set_item("Title", T);
newEvent.set_item("EventDate", SD);
newEvent.set_item("EndDate", ED);
newEvent.update();
clientContext.executeQueryAsync(Function.createDelegate(this, this.onQueryAddCalendarSucceeded2), Function.createDelegate(this, this.onQueryAddCalendarFailed2));
function onQueryAddCalendarSucceeded2(sender, args) {
alert("Success");
function onQueryAddCalendarFailed2(sender, args) {
alert('Add new item to the calendar failed. ' + args.get_message() + '\n' + args.get_stackTrace());
But I receive the following error:
Add new item to the Calendar failed. Column 'Start time' does not exist. It may have been deleted by another user.
I've checked and 'Start time' does exist. So it seems in SharePoint Calendar lists, field [Start Time] and [End Time] exist but do not exist at the Site Column level.
Please advise.

Hi Khojasteh,
Use “EventDate” for Start Time field, and “EndDate” for End Time field. They are the internal name of the two fields, you can check it in the column settings page url like “Field=EndDate”.
If it isn’t the issue, please debug the code, in which line the error occurs.
Thanks,
Qiao
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Qiao Wei
TechNet Community Support

ESS Working Time - Start Time and End Time in Weekly View

Hello,
I'm having a problem with the business package ESS - functionality Working Time (cat2).
I need that information to Start Time and End Time appear in the Weekly View of the portal.
In Daily View that information are already visible, but In Weekly View that information does not appear.
Does anyone have any suggestions?
Thank you very much your attention.
Att,
Jair de Oliveira Junior

Hi Bala
You can have clock in and clock out in a weekly view.
you have to change the data entry profile settings.
In general settings tab in data entry profile click the with clock times button and maintain the Period type to 02 in time settings tab.
And you can view the weekly entry in clock in and clock out.
Ravee
+91.99206.33669

If I have manually set "Start Time" and "Stop Time" for songs, and my hard drive is backed up in Time Machine, when files/songs are transferred on new hard drive, will my "Start Time" "Stop Time" options be there?

My Macbook Pro will be going in for reimaging and my hard drive will be wiped, I want to know if all my iTunes preferences will be copied if I have backed them up on Time Machine. Specifically, if I have set certain "Start Time" and "Stop Time" for my songs, and I copy my iTunes library, will these "Start Time" and "Stop Time" options remain or will I have to manually set them one by one once again? I need a reply ASAP! Thanks so much!

As far as I'm aware the start & stop times are stored in the library database, not the media files. If you backup/restore/transfer the whole library then the settings are included. If you create a complete copy of your iTunes folder on another drive you can connect to that copy by holding down option/alt as you start iTunes so you can check that everything is working properly before you send the Macbook away.
tt2

Usage dependency is created at Build time and installation time

Hi,
The infrastructure guys have selected the usage dependency as Build time and Installation time, while creating software components.
"Y" SWC is created as depedency for "X" software component.
In SLD(software catalog), we are able to view the Y component as dependency in X component(at both build time and installation time). In usage dependency we are able to view Y component but when we click Y component in usage dependecy we are also able to view X component. Is there any problem with this ?
There is another issue. we are able to view basis object(in IR) in Y component but not in X component. Actually as per the above configuration basis object in IR should appear in X component.
Please refer to another forum which may give you some more idea.("BPM - Message interfaces of one component are not appearing in another comp") pasted on 17 Nov,2006.
Please could you provide us the inputs.
Thanks,
Ramesh

hi,
as you see per my weblog try choosing Installation Time
/people/michal.krawczyk2/blog/2005/08/26/xi-are-you-independentfrom-your-dependencies
more about it on:
http://help.sap.com/saphelp_nw04s/helpdata/en/d4/8d784289b4de54e10000000a155106/content.htm
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Getting Information about In-Time and Out-Time

Hello Experts,
I want to retrieve the In time and Out time of Employees.
The data is maintained in Infotype 2002 (Attendences).
How would I get the data.
Is there any Function Module avaiable for this ?
Please help me out..
Regards,
Ravi Khattar.

Hi Ravi,
The In time and Out time of Employees is maintained through table TEVEN . Tou can use this FM
HR_TMW_DB_READ_TEVENT
Have Fun!!
Ira!!

"Time stamp, Response time and Completion time" in CRM_DNO_MONITOR

Hi,
We have configured Service desk functionality in Solution Manager 4.0.
In CRM_DNO_MONITOR we were able to see all the data except "Time stamp(0), Response time(00:00:00) and Completion time(00:00:00)" of Service desk message.
Kindly let us know, how to configure so that "Time stamp, Response time and Completion time" should be displayed in CRM_DNO_MONITOR.
Best regards,
Bhaskar

Hi,
Do u want this for SLA?
In the service desk you have to assign the date profile to the SLFN transaction type.
For this you can use the standard date profile SLFN_HEADER.
award point if it helps you.
regards,
mahantesh

SCOM Alert Connector - not updating the start time and finish time

When I am monitoring the status of connectors in service manager console, I found that for SCOM Alert Connector the Start Time and Finish Time are not updating. Previously it was updated daily. As of now, service manager is working fine but would like
to check will it create any issues? Even I have cliked on Synchronize Now, but there is no update. Please guide me on this to trouble shoot further? Thanks.

Hi,
Based on my research, the Start Time and Finish Time values are not updated when an alert connector is synchronized. These values are only updated when alert data is transferred between Operations Manager 2007 and Service
Manager.
More details, please refer to the link below:
http://technet.microsoft.com/en-us/library/hh495609.aspx
In addition, here is a blog about troubleshooting for SCSM and SCOM alert connector:
http://blogs.technet.com/b/servicemanager/archive/2010/04/14/troubleshooting-tips-for-your-scsm-scom-alert-connector.aspx
Regards,
Yan Li
Regards, Yan Li

The time for transit, transportation lead time and loading time of the mate

Dear Friends,
Please mail to me, where should I give the time for transit, transportation lead time and loading time of the material at the ware house.
This is at the time of Transportation scheduling, for a specific material.
With regards,

i am giving u the exact & specific answer.
please follow the menu path in SPRO
IMG, Logistics execution, shipping, basic shipping functions, scheduling, delivery and tranportation scheduling, maintain duration,
In that screen, maintain the settings
Hope it answers
Do reward points if it is useful

Enter start time and end time of inspection

Dear all
Plz tell me where we can enter start time and end time of inspection.
Regards
Nirmala

Hi Nirmala,
I think Inspection start time is not required for any analysis or else. Days taken for closing lots are important than time. Any how, the stock posted or Inspection completed time is already available in Stock posting log - transaction QA33.
In transaction QA33,
1. Input Material, Plant & Period etc
2. Select a lot (UD made)
3. Select Usage decision tab
4. Select Stock posting tab
5. Select Stock posting log in the tab(header) - here your inspection completed (UD) time is getting stored
Further issue, pls reply.
VRMP.

Fcp4 Excessive render time and save time

Excessive render time and save time ...... i mean this can take 2 hours!!! what can be done to fix this? is this normal? what may be the problem? its killing me!! mac g5 duel 1.8 512 meg

More info.
Is it a long sequence?
Is it effects and layer intensive?
How large is your project file after saving?
What are you rendering to/
What are you editing... DV... HD etc.
Render time can vary greatly depending on these and other issues.
As for long saves, is only one project open when you are saving?
When projects get really large they start to take longer and longer to save and become harder to work with.
rh

My iphone 6 plus doesnt show me numbers on usage time and standby time i got it 4 days ago

my iphone 6 plus doesnt show me numbers on usage time and standby time i got it 4 days ago

Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H.

I created a form with Single Choice fields, 4 days with times listed. But, I want the user to only be able to choose one time, and the time chosen to be unavailable for other users. How do I do this?

I created a form with Single Choice fields, 4 days with times listed. But, I want the user to only be able to choose one time, and the time chosen to be unavailable for other users. How do I do this? I have 4 blocks of Single Choice fields in order for the summary page to give me each day in the final report. But, I need the user to be able to make a selection of any day and time and that apointment to no longer be available to future users when they log in. Plus, when the user clicks on the time, they are unable to change their mind and choose another time. Here's the link if you want to see what I'm talking about: 2015-2016 Workload Apportionment Review

I'm afraid not. It's not rocket science but you need to do some coding.
You'll need to find a script (php) and save it to your local site folder. Then reference the script in your form's action attribute like so.
<form action="path/form-to-email-script.php" >
The input fields in your HTML form need to exactly match the script variables.
I'm assuming you're hosted on a Linux server which uses PHP code. Linux servers are also case sensitive, so upper case names are not the same as lower case names. It's usually best to use all lower case names in your form and script to avoid confusion.
Related Links:
Formm@ailer PHP from DB Masters
http://dbmasters.net/index.php?id=4
Tectite
http://www.tectite.com/formmailpage.php
If this is all a bit beyond your skill set, look at:
Wufoo.com (on-line form service)
http://wufoo.com/
Nancy O.

I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.

I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.

I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.

Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens

Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens

Hi Glenn,
Kindly try out the steps mentioned in the link below and see if you are able to serialize your software.
Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
Try Solution 2: Clean up cached user login information.
Please share the results after performing the steps.
Thanks,
Atul Saini

Quick Time 7 and Quick Time Pro Functionality Issue

Similar Messages

Maybe you are looking for