Quicktime pro -I have exported two mp4 to web formats with no problems.  all of a sudden it is now stopping and shutting down.  I am on a pc with windows 7  Help!

Quicktime pro -I have exported two mp4 to web formats with no problems.  all of a sudden it is now stopping and shutting down.  I am on a pc with windows 7  Help!

Is the problem limited to a specific file that you're exporting?

Similar Messages

  • I did force shutdown on my MacBook Pro (2006 year, 15.4"), so, when I tried to boot, it shows apple logo (as usual) and shuts down. When I booting MacBook with Option key pressed it shows lock icon and field for password. Please help me.

    I did force shutdown on my MacBook Pro (2006 year, 15.4"), so, when I tried to boot, it shows apple logo (as usual) and shuts down. When I booting MacBook with Option key pressed it shows lock icon and field for password. Please help me.

    Wait for advice on repairing a damaged filesystem.  Forceshutdown stops processs in mid-stream and leaves some parts not-valid.
    Do not proceed until you get that avice.

  • I have forgotten my appleID password and the email it is linked to is deactivated, security questions aren't working. This is on my iPhone and iTunes acs so I can't sync with my new computer. How do I merge AppleID accounts and shut down the old one?

    I have forgotten my appleID password and the email it is linked to is deactivated, security questions aren't working. This is on my iPhone and iTunes acs so I can't sync with my new computer. How do I merge AppleID accounts and shut down the old one (when I have no password and the security questions aren't working?)

    You cannot merge Apple ID accounts, that has never been supported.
    You can contact the Apple ID Security folks per the listing in http://support.apple.com/kb/HT5699 and they can help reset security questions and get the account working.

  • I'm downloading the OS X Mavericks then in the process of downloading till 4.20GB it stops and shut down my Mac Book Pro and automatically restarted

    i'm downloading the OS X Mavericks then in the process of downloading till 4.20GB it stops and shut down my Mac Book Pro and automatically restarted. Any answers for this?

    The download is over 5GB's so yours is incomplete.
    You should be able to resume the download (instead of starting over) at the App Store.

  • My Final Cut Pro X quits unexpectantly and shuts down which makes it impossible to use..need help asap

    Went I went to grab some pictures that I had downloaded from the web, FCP X shut down and sent a message to APPLE.  I have tried deleting the pics and this morning it was working for a little while but it shut down again.  I need to get FCP working properly. 

    Same thing happened to me yesterday. It started after there was a sudden electricity shut off when I was playing with FCP X. I do not have Compressor installed. I eventually managed to get FCPX to work again when I manually deleted in Finder the project on which I was working when the electricity went off.
    I hope this information may give you some ideas on your problem.
    Mannnolo

  • Replaced Logic Board, RAM, and hard drive connecting wire, but Macbook Pro 15' (Mid 2010) now freezes and shuts down randomly

    I have a mid 2010, Macbook Pro '15. Summer of 2012, it kept shutting down and making the three beeping noises, so I took it in for repair. I was told that my Logicboard needed to be replaced, so I replaced it, and took my Macbook abroad with me. Halfway through the summer, the three beeping noises resumed, and since I was abroad, I couldn't use my 90 day warranty and take it back for repair. By the time I returned to the US, my warranty ended, and I was told that the RAM actually needed to be replaced. So I replaced that.
    In May of this year, my laptop wouldn't start and instead showed a folder with a question mark. I took it to repair and was told it was the hard drive wire that needed to be replaced, so I replaced that. Less than two weeks after, my Mac began freezing whenever I had a YouTube video or song playing- it made short, staticky sounds and then shut down. Now, it shuts down randomly even when I'm not playing videos or songs, and regardless of if it is running on battery or plugged in. Since I got my hard drive wire replaced, I've also noticed that the laptop takes an incredibly slow time to start up.
    The last the Genius Bar technicians looked at my computer when replacing the harddrive wire, they hadn't said anything else was wrong with my laptop.
    I've spent almost $1000 total fixing my macbook and am quite sick of going through this over and over again. Can anyone help me know what went wrong this time? (I have no apple care) Thank you in advance.

    Check to see if you've any panic logs -> http://support.apple.com/kb/HT2546.
    If so, post the text of the latest.
    Clinton

  • I used to be able to open .pdf documents on my MacBook Pro using FireFox with NO problems, all of a sudden NOW they won't open and i get "unsupported" error messages. What the ****? I need to fix this ASAP! Can anyone help in simple non geek language?

    THANKS.

    Depending on which version of Firefox you're using, it no longer currently supports the plug-in provided with Adobe Reader. You have to use PDF Plugin 2.4.4. Just disable the Adobe plugin and use the Schubert plugin.
    Clinton

  • HT1948 USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

    USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

    OS X installers have always been fairly specific, hardware-wise. I haven't read anything reflecting that situation with the Recovery HD, so it may be that the Recovery HD created for the MacBook Pro does not have the necessary drivers for the Mac Pro. Obviously, nothing definitive here, but a possibility.

  • I have quicktime 7 and have just bought quicktime pro but have no idea how to download it

    I have quicktime 7 and have just bought the upgrade to quicktime pro but hav eno idea how to down load it, help

    You should be able to enter the code into the preferences dialog of your existing QuickTime installation to upgrade it to pro.

  • My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help?

    My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help I have tried everything I know to do

    Unfortunately this means that there is a problem in the boot sector of your hard drive. It might be indicative of a fundamental corruption in the coding that allows your computer to boot your operating system from your hard drive. I had this problem twice and it resulted in me having to get a new hard drive and restore my data.
    In other words, your computer can't talk to your operating system so you can't access your data.
    Here is my advice: DON'T CALL APPLE TECH SUPPORT though they are kind and usually helpful it will take you an hour just to explain the situation and they will only tell you to do what I'm gonna say here.
    First: Shut down your computer completely
    Two: boot up while holding down the following keys: command, option, p, and r. The computer will reboot 3 times. This solution will likely fail so if you're frustrated skip to the next step.
    Three: Boot up while holding down the option key. Select recovery drive. Select your default language. Select disk utility, click on Macintosh HD, and select "verify and repair volume." Likely the verification will produce some line like "unused node not erased." Or something like that. If anything using the words "node structure" comes up, you need a new hard drive.
    If after verification and repairs you still can't boot I sincerely hope you have apple care because you will need a new hard drive. Set up an appointment to come in to the apple store, they will tell you to go and get data recovery, just ask them to give you the old hard drive. Unless you have an up to date backup in which case you can just restore from that. If you're lucky the only issue is with the boot sector which means that if you ask them to give you the old hard drive, you can buy an enclosure and you have effectively been given a free external hard drive. It still works to store data just not to load an operating system.
    If you have a back up drive bring it to the apple store and they'll do the whole thing right there, it should take around an hour and a half but may take longer.
    Hope this helps, it's annoying but it's your safest bet.
    All the best.

  • I made a imovie project and it has many transitions and stills and music soundtrack and rolling comments and text embedded in it. . I try and export it and it wont prepare the project beyond 16 minutes and shuts down every time. I have tried exporting it

    i made a imovie project and it has many transitions and stills and music soundtrack and rolling comments and text embedded in it. . I try and export it and it wont prepare the project beyond 16 minutes and shuts down every time. I have tried exporting it to movies idvd itunes,and quicktime in a variety of sizes although not the smallest as I want to watch it on my computer and tv. All videos were recorded on an iphone. Apple store couldn't help me and suggested I redo part of the project. It is a really good project and would take hours to redo it . I just want to export it. Can any one please help???

    Hi
    Trying to get a picture of it.
    • Free Space on Your Start-Up (Mac OS) Hard Disk. How Much ?
    • Any other hard disks connected ?
    • If so - Formatted as ?
    Yours Bengt W

  • Satellite Pro A300D gets to warm and shuts down after short time. HELP!!!

    Hallo together,
    i bought the Satellite Pro A300D notebook 3 weeks ago. Since the beginning I have the problem that the notebook gets to warm and shuts down within an hour!
    I dont run any high performance application and I keep the left side of the notebook free so that the warm air can get away! I already cleaned the heatpipe by using a hoover.
    That couldnt be! I need the notebook for work and thats impossible...
    What can I do? Do I have it to send in?
    For help I am thankfull
    Frank
    Message was edited by: DerVogel

    Hi there DerVogel ,
    Sounds like a Heat related issue ????????
    Whenever it shutdown automatically does it turn on right away ? One symptom of a heat related issue is, it takes about several minutes before you can turn it back on again.
    Here is how you can isolate the issue since it could also be a software related problem.
    1) Turn on the system Tap F2 and boot on the system setup screen ( BIOS )
    2) Just stay on the Bios , If it doest shutdown on the bios then you might need to reinstall windows. or check if system is infected with spyware or a virus.
    But if it does the same thing then the best thing to so is to bring it to a Repair Center or Call Tech support for a depot service repair.
    Cheers ! hope this will help.
    Message was edited by: iSkO

  • My imac stops(freezes) everytime when I try to extract ipod nano. So if I quit the connection by force, it stops again. Have no choice but to shut down the imac pushing power supply button. Pls help me solve out this problems.

    My imac stops everytime when I try to extract ipod nano. So if I do it by force it freezes agian. Have no choice but to shut down the computer
    by pushing power button. Pleas help me solve this out!!!
    It's not good to shut off the power forcibly, right? (I dun know what else I can do...)

    Hi Min! I'm having exactly the same issue - have been putting up with it now for months but have finally had enough! Every single time i eject either my iphone, ipad or ipod nano, itunes freezes up, the computer becomes unresponsive. Usually i can use the mouse to highlight icons but the system doesn't respond, the keyboard doesn't work and I have to do a hard reset.
    Arrrrrggggggh!!!!!!! lol
    Someone please help!!!

  • Ipod 5th generation will not turn on, charge, or connect to macbook laptop. i was using it for music then all of a sudden the screen went black and was unresponsive. i have tried using other cords. also my home button is broken. someone please help!

    ipod 5th generation will not turn on, charge, or connect to macbook laptop. i was using it for music then all of a sudden the screen went black and was unresponsive. i have tried using other cords. also my home button is broken. someone please help!

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosn

    I have added two new extension on CUCM, Directory not showing in attendant console even after resynch on CUCM and attendant cosnole
    Any idea?

    Hello,
    Can you tell us what versions of CUCM and CUxAC you are using?  Just extensions alone in CUCM will not sync to the corporate directory within the attendant console application.  You will at least have to have user's associated with those extensions and depending on your rule set within the console that should then bring those extensions into the console directory.
    Thanks,
    Tony

Maybe you are looking for

  • Opening a web page created through Dreamweaver

    Is there any way I can open in iWeb and then save a web page I created using another application; in this case, Dreamweaver? Or would I have to duplicate that page in iWeb from the ground up?

  • How to Use CS4 using C#

    Hello guys am new to adobe forum. please help me. am in trouble!!! i  have got one project regarding IN DESIGN. am .net developer, i have downloaded CS4 server free trail. can any one please tell me how to use CS4 using c# ? urgent please.

  • Can I change the default paper type for a printer?

    I have a client that prints off a lot of paperwork from an insurance company. They have barcodes that go pretty much to the end of the page that are nessesary for fileing. The default print setup cuts off the barcode and a few code numbers. If I manu

  • Number of Masters

    Hi, I was just wondering if the forum had any thoughts on the acceptible(optimal), number of master sites that could be used on a large global system with a slow network and very few data changes. TIA Marc

  • Help- laptop repair

    I tried to reset my hp notebook to the state I first bought it in but I shut it down before it was finished and now it keeps saying 'preparing automatic repair' and 'diagnosing your PC' over and over and now loading at all. How do I fix this. Please