Quicktime SYNC Issue sound/immage

Hi there.
When i start a new VideoRecording i can c that the video has latency!
I use :
- Quicktime pro 7.6 (472)
- iSight (external)
- Mac Pro 8-core 2.8 & Macbook Pro 2.5 dual
So to be clear about my prob.
The problem is there even before i Record anything!
I didn't have this problem before (= on my old G4dual 1.42 / Quicktime Updates)
The thing is that i don't use this allot so it's just now that i c this prob!
Does anyone have any suggestions on how to fix this Major problem??
Thx!
Friendly greetz

Have you tried to uninstall / reinstall Quicktime?
http://support.apple.com/kb/HT1224
This article is for iTunes; nevertheless, you would assume that it would be the same process for Quicktime.
Then, when finished with this process, reinstall Quicktime via the downloads page.
http://www.apple.com/downloads
http://www.apple.com/quicktime/download/
If this fails for you then I personally would call the support line to see what else can be done at that point. There maybe an array of reasons why your Mac or Application may be having issues. Although, at the very lest an Apple software update (located at the apple logo at the top left hand corner, then click software updates) should be preformed.

Similar Messages

  • Audio sync issue -- sound recorded at 44.1khz image sound at 48khz

    hey team:
    so I recorded a music session the other night with 2 canon 60Ds, which recorded the audio at 48khz.  I recorded the audio separately to a computer running Ableton Live, which has recorded the tracks at 44.1khz.
    I used PluralEyes to sync the footage and audio.  All's well syncing the footage, but the audio, being a different frequency, drifts from sync.
    I've searched a lot of internet archives on this matter, but none of them seem to work.  I've used Compressor to resample to 48, but it still drifts.  I've used Soundtrack Pro to resample, but it still drifts.  I've gone back to Ableton LIve and re-exported at 48, but it still drifts.
    I've even taken my 48khz resampled file and retimed it using markers at the beginning and end of a long clip.  The weird thing is that it syncs at the beginning, is out in the middle and syncs again at the end.  I'm assuming this is because the sound wave of 44.1khz is slightly elongated compared to 48khz, so they will sync at points but not throughout.
    Have already lost about 8 hours to this nonsense.
    Does anyone have a solution?

    Hi Gary Can you explain how it solved your problem?
    I also tried exporting using qtpro and the problem persisted -- synced at the start, synced at the end, unsynced in the middle....
    cheers
    Paul

  • Quicktime audio sync issues

    Hello,
    I have quicktime version 10 (128).   I can't get anything to play in it without there being severe audio sync issues every time.  I can't figure out why.  Can someone please help me fix this problem? 
    When I export my movies from imovie to quicktime it will play in quicktime, properly and without sync issues, for a really short period of time - seconds.  But after that, the audio no longer matches the video.   I know it's an issue in QT because when I upload the video to YouTube there are no audio sync issues whatsoever.
    Help?
    Thank you so much,
    YahYah

    I am dissapointed to see that no one has addressed this issue. I have similar issues.
    The MP4's play perfectly in the quicktime player but in Premiere they are off by varying degrees sometimes up to a minute even. I had similar problems in the past with files from the same producer. However last time I was able to  change the extension before importing and then sync them up manually on the timeline. It worked everytime. This time however when I change the extension Premiere brings it in as an audio only file.

  • Sound Sync issues

    Hi there. Can anyone help me with this. I've recently captured footage from DVCPRO HD tapes (1080i25p) to the DVCPRO HD format (1080 25i) in FCP through my KONA 3. The footage i have of an interview seems to be out of synch with the sound...not sure by how much, but after doing what i'll explain next, i'm betting it's about 4 frames!
    I wasn't too concerned as it's something i've noticed before and thought that i could have made a mistake with the capture (the KONA 3 is new) and i'm fairly happy to re-sync the sound if needs be. The main problem is that i have now opened an old project (DV PAL) that needs a number of sequences printed to DV tape for my client. Upon opening my project it seems that all the sync to the interviews in the project are now 4 frames out!! Very annoying!
    I can't find anything that could be wrong here within my settings and can't quite get to grips with it but suffice to say, i could do with a pretty quick solution!
    I don't have my RAID turned on with my other project and am just running this from a firewire 800 drive. The project has not been touched since about a week ago when everything was fine!! I've tried deleting all my render files for the project but this hasn't helped either.
    If anyone can help with this i'd really appreciate it
    thanks
    Alex

    Thanks Ken, I've managed to resolve the issue to a certain extent now. There did seem to be some sort of lag introduced by the Kona even though i wasn't directing sound through it or even had anything plugged in to the sound out connectors on the breakout box. I disconnected the HDCAM deck i have in the suite from the breakout box and things are now back in sync. A solution, but certainly would be interested to know why as I'd like to think i'd be able to cut stuff even if a deck is connected to my breakout box.

  • Anyone noticed Quicktime 7.4.5 causing out of sync issues for online vids?

    Since 7.4.5 all Quicktime video clips I view online in Safari have audio out of sync with the video (by perhaps four frames). Anyone else seeing this?

    I do not use Safari. However, I have no problems w/out of sync issues using the +latest versions+ of FF, Camino & Netscape.
    Have you tried other browsers to rule out Safari as being the culprit rather than QT? Are you using the latest version of Safari?
    What troubleshooting methods have you tried to resolve your issue? Need this info to avoid the +"been there done that"+ senareos.

  • How do I get rid of lip-sync issues with iTunes 10.2.2.12?

    Hi Everyone.
    Firstly, a very Happy Easter!
    I'm having lip-sync issues with iTunes playback on my PC. The video is largely smooth with the occaisional choppiness when the CPU is made to work hard. (Playback on my iPod Touch is fine).
    The system stats for my PC are at the bottom of the post.
    The sound is produced through a Creative Live Sound Blaster Live! 5.1 card.
    Video is through a NVIDIA Geforce 6200 with 512Mb of RAM. (All video and audio drivers are up to date).
    The physical set-up is that I have iTunes installed on the C drive and my media installed on an external USB hard-drive.This isn't just a problem with 10.2.2.12 - it's been there for the last few updates.
    I suppose my main questions are:
    Should iTunes and my media be on the same drive? (Which would mean the external drive as I'm short on space on the C drive).
    Is there some combination of settings in QuickTime that will solve this? (I've tried different combinations, but it doesn't really help).
    Is the spec (below) of my PC causing any issues.
    Here's an Easter Egg for anyone able to help!!
    All the best
    BandAidUK.
    System Information
    Time of this report: 4/24/2011, 10:13:44
    Machine name: DEREK
    Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.101209-1647)
    Language: English (Regional Setting: English)
    System Manufacturer: Dell Computer Corporation
    System Model: Dimension 8300              
    BIOS: Phoenix ROM BIOS PLUS Version 1.10 A07
    Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
    Memory: 3326MB RAM
    Page File: 1273MB used, 3941MB available
    Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
    DX Setup Parameters: Not found
    DxDiag Version: 5.03.2600.5512 32bit Unicode
    Display Devices
            Card name: NVIDIA GeForce 6200 
         Manufacturer: NVIDIA
            Chip type: GeForce 6200
             DAC type: Integrated RAMDAC
           Device Key: Enum\PCI\VEN_10DE&DEV_0221&SUBSYS_02F3196E&REV_A1
       Display Memory: 512.0 MB
         Current Mode: 1280 x 1024 (32 bit) (60Hz)
              Monitor: Plug and Play Monitor
      Monitor Max Res: 1600,1200
          Driver Name: nv4_disp.dll
       Driver Version: 6.14.0012.6099 (English)
          DDI Version: 9 (or higher)
    Driver Attributes: Final Retail
    Driver Date/Size: 10/22/2010 07:23:24, 6359552 bytes
          WHQL Logo'd: Yes
      WHQL Date Stamp: n/a
                  VDD: n/a
             Mini VDD: nv4_mini.sys
        Mini VDD Date: 10/22/2010 07:23:24, 9623680 bytes
    Device Identifier: {D7B71E3E-4161-11CF-0D6D-FF2200C2CB35}
            Vendor ID: 0x10DE
            Device ID: 0x0221
            SubSys ID: 0x02F3196E
          Revision ID: 0x00A1
          Revision ID: 0x00A1
          Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
    Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                       {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                       {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
             Registry: OK
         DDraw Status: Enabled
           D3D Status: Enabled
           AGP Status: Enabled
    DDraw Test Result: Not run
    D3D7 Test Result: Not run
    D3D8 Test Result: Not run
    D3D9 Test Result: Not run
    Sound Devices
                Description: Creative SB Live! Series
    Default Sound Playback: Yes
    Default Voice Playback: Yes
                Hardware ID: PCI\VEN_1102&DEV_0006&SUBSYS_10031102&REV_00
            Manufacturer ID: 1
                 Product ID: 100
                       Type: WDM
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                Other Files:
            Driver Provider: Creative Technology Ltd.
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 8000, 96000
    Static/Strm HW Mix Bufs: 64, 63
    Static/Strm HW 3D Bufs: 64, 63
                  HW Memory: 0
           Voice Management: No
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
                   Registry: OK
          Sound Test Result: Not run
                Description: SoundMAX Digital Audio
    Default Sound Playback: No
    Default Voice Playback: No
                Hardware ID: PCI\VEN_8086&DEV_24D5&SUBSYS_01571028&REV_02
            Manufacturer ID: 65535
                 Product ID: 65535
                       Type: WDM
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                Other Files:
            Driver Provider: Analog Devices
             HW Accel Level: Full
                  Cap Flags: 0xF5F
        Min/Max Sample Rate: 100, 192000
    Static/Strm HW Mix Bufs: 33, 32
    Static/Strm HW 3D Bufs: 33, 32
                  HW Memory: 0
           Voice Management: Yes
    EAX(tm) 2.0 Listen/Src: Yes, Yes
       I3DL2(tm) Listen/Src: Yes, Yes
    Sensaura(tm) ZoomFX(tm): Yes
                   Registry: OK
          Sound Test Result: Not run
    Sound Capture Devices
                Description: Creative SB Live! Series
      Default Sound Capture: Yes
      Default Voice Capture: Yes
                Driver Name: P16X.sys
             Driver Version: 5.12.0001.0129 (English)
          Driver Attributes: Final Retail
              Date and Size: 8/14/2003 16:58:12, 1296384 bytes
                  Cap Flags: 0x41
               Format Flags: 0xFFF
                Description: Hauppauge WinTV 88x Audio Capture
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: hcw88aud.sys
             Driver Version: 2.125.28070.0000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/12/2010 09:47:58, 13440 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCC0
                Description: SoundMAX Digital Audio
      Default Sound Capture: No
      Default Voice Capture: No
                Driver Name: smwdm.sys
             Driver Version: 5.12.0001.7000 (English)
          Driver Attributes: Final Retail
              Date and Size: 3/22/2005 11:08:40, 260224 bytes
                  Cap Flags: 0x41
               Format Flags: 0xCCC
    DirectMusic
            DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
         DLS Version: 1.00.0016.0002
        Acceleration: n/a
               Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
                      Creative SB Live! Series, Software (Kernel Mode), Output, DLS, Internal
                      SoundMAX Digital Audio, Software (Kernel Mode), Output, DLS, Internal
                      Microsoft MIDI Mapper [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! Synthesizer [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Output, No DLS, External
                      Microsoft GS Wavetable SW Synth [Emulated], Hardware (Not Kernel Mode), Output, No DLS, Internal
                      Creative SB Live! External MIDI [Emulated], Hardware (Not Kernel Mode), Input, No DLS, External
            Registry: OK
         Test Result: Not run

    Select *List view* instead of *Album list view*. These are in the View menu or the boxes next to Search, on the right top of iTunes.
    and the column next to it with a number in it that I have absolutely no idea what it's for. I want those two columns OUT.
    In List view, you can turn off every column (in menu View > View options) except track name.

  • A/V out-of-sync issue for FCP captures

    I've read many of the out-of-sync posts on this board, most of which seem to indicate that the problem is usually caused by either dropped frames, bad timecode breaks, edit errors, or disunity between FCP capture and sequence settings, compared with audio sample rates for the underlying files.
    My files, shot on my Panasonic AG-DVX100A in 24pa mode, result in perfect (except for the anamorphic screen size - see my next post!) Quicktime movie files, in perfect sync. It's only when I create clips from those files in FCP that the video and audio go out of sync. And the out-of-sync drifts; that is, the further you go in the clip, the more out of sync the sound and the video gets.
    My camera is always set to the 24pa mode, which, by default, records only in the non-drop-frame mode, regardless of any other camera settings I may have selected. The audio settings in my camera (and in the resulting underlying QT files that are created when I capture in FCP) are 16-bit integer and 48.000 khz, as they are in both my FCP sequence presets and capture presets, so I don't think it's an issue of conflicting sample rates. My device control presets are for Firewire NTSC NDF (non dropped frame).
    Given the above information, does anyone have any idea what else I might be doing wrong? I've already shot hundreds of hours of footage last year that worked fine. I don't know what I changed to cause this out-of-sync problem now, but I'm going bald tearing out my hair trying to figure it out.
    Thanks in advance for your help!
    - Mick Raton
    Dual 2 GHz PowerPC G5   Mac OS X (10.4.7)   5 GB DDR SDRAM; Final Cut Studio 5.0.4; Panasonic AG-DVX100A

    The dvd recorder was in the loop when the sync issue showed up.  the dvd was in sync but the live stream, next in line, was out of sync.  I have returned to using the older machine with xp.  (the lap top is running vista)  The older machine is a desktop which requires more space on the production table and time to set up.

  • IMovie 6 Audio Sync Issues

    I have a Canon HV10 HDV camcorder and I am having issues with my video and audio being out of sync in iMovie. I have not attempted to move the movie to iDVD or QuickTime. My movie is a little over 28 minutes. I have the limit scene length setting set to 2 minutes. I am recording in 16 bit audio - not 12. I have made a few very small movies with this camera without issue. This is the longest movie I have imported so far. I have about 66G of hard drive space prior to import and about 48G after.

    Kurt,
    I have been following this thread and although I have a Sony HC-3 I share your pain. I do not have audio sync problems after importing its only when I add transition between clips that I have sync problems.
    The long and the short of it is that there seems to be an issue with any and all HD content with iMovie. From what I can find here and on other forums is that the audio sync issues comes in a couple flavors.
    1. Audio sync with 12 bit audio. iMove does not like 12 bit audio stream, find out what kind of audio stream your camera has, many have 12 bit audio to allow for stereo sound with minimal space on the take, 16 bit takes up more and usually is mono sound.
    2. Even 16bit Audio streams have issues with HD content. Not so much when you capture its when you perform any editing that involves the transition of audio where iMovie must manipulate the stream in some way.
    Now with that out on the table, what is Apple's position on this?
    Items they have had me try:
    Clear the Cache's and settings, re-install the program (iMovie), and the last thing they told me was, "Well iMovie is not a professional product and it is not going to be perfect".
    My opinion is that they have not or will not attempt to research this issue because they do not feel it is a wide spread issue OR they are working to develop the newer version and hope that resolves the problem.
    Lastly I have Final Cut Express HD, and I am here to tell you it does not express the same issues as iMovie although it take a little more effort to produce the same results than it does with iMovie.
    I am confident that there will eventually a solution for this an other issues, it just takes time and effort on others to resolve. I am grateful to others here in the forums and I know Apple support keeps their ears to the pavement when it comes to the forums, but lets face it unless many. many people contact the Support department with Apple nothing will get done. It's next to impossible for everyone here to experience the same issues you and I are having, so that is why these forums are so useful. People helping people, keep up the good work everyone and I know I am grateful to any and all help that is given here in the forums by others willing to take the time to share their knowledge and expertise.
    Thank you!

  • IPhone and Windows 7 64 Bit - syncing issues

    Hi,
    Just wondering if anyone is able to help. I have updated to Windows 7 and am having problems syning my iPhone. It comes up with a multitude of errors but the most common is:
    'The iPhone "Michael's iPhone" can not be syned. The required file can not be found.
    I have restored the iPhone and after it resets, it sits at the Setup Window in iTunes for ages, then clicks over, starts syncing (it is doind that now) but also displays the error. Will be interesting to see if it actually finishes the sync and to see if the apps work on the phone.
    I have also removed iTunes, Quicktime, Mobile App Supprt, Apple Software Updater, Bonjour and reinstalled and still the sync issues coninue. I also ran the diagnostic tool in iTunes on syncing and detecting the iPhone and it reports everything is ok.
    Microsoft Windows 7 x64 Business Edition (Build 7600)
    Gigabyte Technology Co., Ltd. P55-UD6
    iTunes 9.0.1.8
    QuickTime 7.6.4
    FairPlay 1.5.18
    Apple Application Support 1.0
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.6.0.32
    Apple Mobile Device Driver 1.45.0.0
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number E400D*7E1<Edited by Host>
    Current user is an administrator.
    The current local date and time is 2009-10-23 19:56:37.
    iTunes is not running in safe mode.
    Video Display Information
    ATI Technologies Inc., ATI Radeon HD 5800 Series
    ** External Plug-ins Information **
    No external plug-ins installed.
    Genius ID: cecad029456cdd284aef514988f34808
    ** iPod/iPhone Connectivity Tests **
    iPodService 9.0.1.8 is currently running.
    iTunesHelper 9.0.1.8 is currently running.
    Apple Mobile Device service 2.50.39.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    Texas Instruments 1394 OHCI Compliant Host Controller. Device is working properly.
    Connected Device Information:
    iPhone, iPhone 3GS running firmware version 3.1.2
    Serial Number: 88924**3NS <Edited by Host>
    Most Recent Device Not Currently Connected:
    iPod nano (5th Generation) running firmware version 1.0.1
    Serial Number: YM937**72D <Edited by Host>
    ** iPhone/iPod Touch Sync Tests **
    Sync tests completed successfully.
    I have applied all software updates and the latest chipset drivers for the motherboard. My Nano syncs without a problem. It just seems to be my iPhone.
    I have iTunes installed in the defualt directory on C:\ with the mobile apps etc. Music is located on my E:\
    I am not sure what to do now....

    Well, the new gigabyte bios fixed the issue.

  • VCast voice sync issues

    Thanks for creating the VCast application for Android!
    I've really enjoyed it, but I've also been very frustrated with the quality. I see a lot of skipping, pixelation, and sound sync issues. It seems anytime I get any disruption in feed, the entire video gets out of sync with the sound. It wouldn't be bad if it was every now and again, but it happens 90% of the time. It pretty much nullifys the whole experience.
    I don't understand why I would have these issues when I have 3/4 bars of reception.
    Thanks.

    Try  dialing *228 send and option 2 to update your PRL.  After doing so, do a battery pull, to reset the phone. Did you check the area you are in for V cast coverage?  Hope this helps!

  • Calendar sync issues between iphone and icloud

    My Iphone5 "phone' calendar does not seem to sync with Icloud calendars. Icloud carries home and work calendars which are also on my phone but not my "phone" calendar

    Hi pws442,
    It sounds like you’re running into an iCloud syncing issue with your MacBook Pro and your iPhone. If you haven’t already, take a look at the articles linked below which provide a lot of great information and troubleshooting tips.
    iCloud: Troubleshooting iCloud Calendar - Apple Support
    Get help using iCloud Contacts - Apple Support
    Ciao,
    -Jason

  • ICloud Sync issues between iPhone and MacBook

    I have a peculiar problem. I have iCloud turned on for Contacts, Calendar and Notes between my iPhone 6P and my MacBookPro running OS X 10.10.2. If I make  a change or add an entry on the MBP, it does not show up on the iPhone until I make a change to something on the iPhone, then the iPhone changes go to the MBP, and the MBP changes then, and only then, appear on the iPhone.
    I have the same iCloud account on both devices. Very confused. (I have not done anything regarding Family Sharing, and I do have the iCloud drive turned on.)
    Any clues?

    Hi pws442,
    It sounds like you’re running into an iCloud syncing issue with your MacBook Pro and your iPhone. If you haven’t already, take a look at the articles linked below which provide a lot of great information and troubleshooting tips.
    iCloud: Troubleshooting iCloud Calendar - Apple Support
    Get help using iCloud Contacts - Apple Support
    Ciao,
    -Jason

  • Major sync issues between iphone and itunes + outlook

    I have an iphone 5, mistakenly pushed the button to update to ios7, got a new window pc with win8 and office13, and mistakenly again got updated itunes 11.1.3...after many years of pretty seamless itunes/outlook calendar/contacts/podcasts/ etc etc syncing experiences, now itunes doesn't sync playlists with my phone, constantly wipes out my podcasts even though i chose "no sync with podcast", doesn't sync into outlook calendar/contacts/etc at all. i tried to roll back to itunes 10.7 (used the tips from this forum), but it says my phone won't work with versions older than itunes 11. it's like nobody's able to talk to anyone any more. what's going on????

    Hi pws442,
    It sounds like you’re running into an iCloud syncing issue with your MacBook Pro and your iPhone. If you haven’t already, take a look at the articles linked below which provide a lot of great information and troubleshooting tips.
    iCloud: Troubleshooting iCloud Calendar - Apple Support
    Get help using iCloud Contacts - Apple Support
    Ciao,
    -Jason

  • Premiere CS5 h264 sync issue

    I'm having SERIOUS  sync problems when exporting a film to a h264 format. (Before i used primarely Flash and Windows media and haven´t had any problems). The sync issue can be seen in Quick time player, on Macs and on some online video platforms that I use.
    The sync issue occurs more in some films and  less in some films that I'm producing. I have tried to isolate the problem, effects used , audio format etc etc. , but i haven't found  any effects or anything that causes the problem. I'm out of sync by 6-12 frames.
    This is a major problem as my clients prefer h264 and h264 has superior quality to other formats. (Quality as a function of file size).
    To solve this with a temp. fix i do the following;
    I export the finished film to a MPEG 2 format (about 300Meg for a 3 minute film). And convert the film to mp4 using a 3rd party converter. By doing this i lose som quality but the film i in-sync. This is a short term solution and i have to switch to another editing software unless this is fixed on the CS6. Adobe just refers to forums and can't/won't be at any help on this.
    Anyone out there that has experienced the same problems?
    I have premiere on 4 different pcs in different confíguration , with or without gtx470 graphicts, on laptop etc etc. , so, please don't ask me  "What is you system configuration...etc" . This is NOT a system related issue.
    rgds msx

    The QuickTime player often has this issue.  It is best not used at all.  Instead, try the free and excellent VLC player.
    Having said that, there are free encoders out there (MeGUI, Handbrake, Xvid4PSP, etc.) which use the x264 encoder, which many find superior to others like the MainConcept encoder Adobe uses.  But your best bet here is to export out a lossless intermediate rather than a highly compressed MPEG.  The UT codec is free, lossless, plays nice with Adobe software, and since version 11, is now both read and write capable on Macs.

  • AME CS6 Audio Sync Issue

    I was recently in the process of mass converting all of the old video podcasts I help produce from an old m4v format to a newer mp4 format. Both formats are essentially the same (H.264 & AAC audio), but they vary slightly in frame size and bitrate. The difference is that the the old format was the standard for Apple's earlier devices (such as the original Apple TV), and the new format is used for Apple's later devices, as well as Android devices, and is generally more user friendly.
    At any rate, I created a Watch Folder to accomplish this, and let it run overnight. Came in this morning to find that the audio was not in sync with the video on the vast majority of the files. I created my own preset, but while I was attempting to solve the problem, I discovered my preset was exactly the same as the Apple presets.
    I've tried several different Apple presets, taking the watch folder out of the situation, and playing the files back in different players (Win Media, QuickTime, and VLC). Doesn't matter what I do, nearly all files with audio/video sync issues ranging from a few frames to several seconds. The only way I've found to stop the sync issue is to put the old file on a Premiere Pro timeline and exporting that sequence. But obviously that ruins the whole purpose of Watch Folders.
    Anyone happen to have a similar issue and/or have found a solution?
    Specs:
    Windows 7 Pro x64
    Adobe Media Encoder CS6 v6.0.1.31
    AMD FX-8120

    I do agree it is the wrong way to go about it, but all of the original projects are FCP 6 projects, and the media has either gone missing, no longer linked correctly to the project, or on DV tape somewhere. On top of this, I no longer have Final Cut installed, and my manager for whatever reason decided not to save DV deck or two when we migrated to XDCAM EX. Premiere Pro does have an FCP XML import feature, but it rarely works perfectly, so even if I did manage to find all the media, I'd have to spend hours correcting the timeline. Essentially more work than it is worth.
    BUT, I accomplished exactly what I wanted to do with Handbrake. Does it look bad? Yes, but most people will be watching it on their 4" phone screens anyway.
    Regardless, I may have found a bug that should probably be corrected... I'll submit a bug report on the pre-release forums if 6.0.2 doesn't fix it.

Maybe you are looking for

  • I fixed my Extension Manager Issues.

    A customer of mine came in today with his Apple Hackintosh system, running OS X Lion 10.7.1 with all updates done, and the Java Library already installed. The issue they were having was to do with Adobe Extension Manager just crashing about 10 second

  • Looking for a printer

    sorry if this isn't the right forum, i'm looking for a relitivley cheap all in one device printer/scanner/photocopier compatible with both my MacBook Pro and my iBook G3 - could anyone recommend any? thanks

  • Ipod Photo and Video Problems

    my Ipod 5th generation recently got the IOS 8 update. Don't get my wrong i love it but it's deleting my pictures as I get more. It's driving me insane. It's deleted my pictures from the time I got it (March 25ish) to about 3 weeks ago. i went from a

  • How to avoid row chaining in _LT tables

    Hi, I am seeing lot of row chaining in the LT tables. What is the best method to avoid row chaining with workspace manager tables? Also can I move the LT tables using the "alter table move" command. Will this affect versioned tables metadata informat

  • Another Art/Graphics query

    Podcast has been in the iTunes store for many months. The main Podcast page shows the <itunes:image> graphic, but my Podcasts subscription page does not. Furthermore, I recently noticed another Podcast showing artwork in my iPod, and ours does not do