Quiz - not recognising correct answers

Just trying to create a quiz using Captivate.
I thought I had it figured out, except that it doesn't seem to recognise correct answers.
http://www.learners-guide.co.uk/quiztest/captivate/tests/test3/test3/index.html
I have selected the checkbox for Q1 and tick boxes for Q2.
What might have I done wrong or missed?
Thanks.

Maybe these posts could help to clarify the design of Question/Score slides:
Question Question Slides in Captivate - Captivate blog
Question Question Slides - Part 2 - Captivate blog
Buttons on Question/Score Slides in Captivate 6? - Captivate blog
Branch Aware Quiz - Captivate blog

Similar Messages

  • Delete this as not got correct answer from long time

    Delete this as not got correct answer from long time

    When you upload files to MDS using the ant script it overrides the existing files with the same name.
    If you want to remove resources from MDS using ant you can use the the removeSharedData target in the ant-sca-deploy,xml ant file.

  • Captivate 5 quiz review not showing correct answers when loaded to LMS

    Hello All. I would really appreciate some help please. Despite the quiz review working correctly when published, i.e. both 'your answer' and 'the correct answer' captions appear in the review, on loading to LMS the review caption does not show the 'the correct answer is' , but instead 'you did not answer this question completely'.
    Any ideas why this should be the case? I've attached screen shots of my quiz preferences for completenes.
    Many thanks in advance.
    Janey

    Do the same modules evidence this behaviour when published and played outside the LMS, e.g. from a web server or on your hard drive?
    If not, it's possible that some setting in the LMS is over-riding what happens at playback.  You could try checking the box under LMS Customisation for Never Send Resume Data and see if that seems to make any difference.  If the LMS is maintaining a record of some previous attempt at the same module then turning off Resume Data might show that up.

  • Captivate Quiz Not Reporting Correctly in LMS

    I am using Captivate 5.0 to publish a project to an EKP LMS. I am able to get the file to show complete in the LMS, but the quiz is not reporting correctly. Instead of a percentage it is reporting the number of points earned. Is there any way to have a percentage reported instead? I would appreciate any suggestions.  Grace

    Hi Grace,
    Can you check the Highlighted part and reset your Radio button to 'Percentage'--
    Thanks,
    Anjaneai

  • HT201303 I tried to update my security questions this morning but got timed out.  Ive just tried to get into my account but the system does not recognise the answers to my question.  How can I rectify this problem please

    I was trying to update my Security Questions this morning but got 'Timed Out' I've just tried again to get into my security settings but the system does not recognise the information I'm putting in. Can anyone tell me how I can correct this problem.  I can still log-in.
    Best wishes

    Welcome to the Apple Community.
    You might try to see if you can change your security questions. Start here, change your country if necessary and go to manage your account > Password and Security.
    I'm able to do this, others say they need to input answers to their current security questions in order to make changes, I'm inclined to think its worth a try, you don't have anything to lose.
    If that doesn't help you might try contacting Apple through Express Lane (select your country, navigate to iCloud help and enter the serial number of one of your devices)

  • Rollover Area on quiz not working correctly?

    Hi
    I have added a rollover area to my quiz, which shows up once the user rolls their cursor over the image on the right hand side.
    It is coming up as you can see, but the quiz question and answers show through.
    Is there a setting to fix this or do rollovers and slidelets just not work properly in quiz's?
    Cheers
    Jonny

    Which version of Captivate do you use? I had answered a question about rollover images on question slides in the other forum, with a screenshot of rollover images that didn't have transparent pixels, and they covered up the question slide objects. I had only to be sure that the rollover area could be reached by the user, was not overlapping (too much) with a regular question object. Will try to insert a screenshot, but have issues with this forum, not possible to insert images any more for me,  will try in another browser and eventually edit this comment. Perhaps have a look at http://captivate.adobe.com/captivate/topics/rollovers_in_question_slides
    Lilybiri
    With IE I can insert: here is a picture with the rollover diamond (bigger here) during preview.

  • Captivate 4 quiz not scoring correctly on certificate widget

    Hi, this is my first post, so I hope I get it right. I am fairly new to Captivate. I have created a quiz that is being scored at the end of a tutorial which includes an interactive training exercise.  The quiz has 5 questions and the student is able to retake the quiz indefinitely until he/she passes.  The problem is when they use the Retake Quiz option.  Although the score slide indicates that they have failed, the certificate is adding the scores of both failed quizzes. So, if someone takes the quiz and gets a 40%, retakes it and gets another 40%, the score report indicates a failing grade, but the certificate is adding it up to 80% and passing them.  Any help anyone can give would be appreciated!!
    Thanks,
    Mary

    This sounds like a bug in the certificate widget.
    Do you have the slide set up to ONLY branch to the certificate AFTER the user has successfully passed the course, or does the user see the certificate each time they do the quiz?

  • Disconnected license does not recognise correct username

    Hello,
    I've recently had a disconnected license file created for a standalone laptop with no internet access. This file is locked the the user "nick.brown". I've tried changing the user account to nick.brown, however when I go onto the license manager it says that the file is locked to the user account "nick.brown" and that the current account is called "User".
    Can anyone help me so my account name is the same as on the license?
    Many thanks,
    Nick.

    Hey Nick,
    Could you consult with your VLM manager that the correct procedures were followed?
    There's two knowledgebase articles on this. Do you definitely want a user based license or could you also create a computer based license? This might be a little easier or at least another method to try.
    http://digital.ni.com/public.nsf/allkb/ACC6C9CE1F2E66AA862577500078C7AB
    http://digital.ni.com/public.nsf/allkb/3BF6EE92ADDC036C862572A300732E00
    Thanks,
    Justin, Applications Engineer

  • I make enable 4G in settings but showing 3G in display ? .same location have 4G .I was called service provider they are not giving corrective answer .UAE etisalat

    Pls help

    Yes that is the map but the area that is 4G is North-West Salt Lake.  Some of downtown is 4G (I guess 4G and extended 4G is that extended is or can be sometimes 4G and sometimes 3G.)  I never doubted that Salt Lake had some 4G.  I was trying to tell you that the Verizon agent told me that Salt Lake city will not have 4G until the end of 2011.  she gave me the URL to an article that validates that.  the other map which another agent used is just red and white.  She said go by this map since it is more accurate as of now and the one with the various reds is toward the end of 2011.  whatever the story is, I have no idea but if you look at the map that you are questioning if I refreshed the map aft checking 4G you will see that most of downtown Salt Lake is not the burgundy red and south of downtown has no 4G at al, just 4G extended and 3G.  If you want to check the area where I live it is near 3900 South or on the section of the map you are showing in your post, it is South of 215 and 80 frwys.  this area on the map I used this morning is all 4G extended and 3G.  I have no idea why the only pure 4G is near the Great Salt Lake, but that area is out where the airport is (west of downtown Salt Lake).  Have you looked at the other map that is just red and white? I am not sure of the difference but the agent told me that map is the most current map if you want something that is current.
    I am confused.  But I am still confused as to why you were wondering if I was refreshing the map?  I was telling or describing in my post what the agents at Verizon had told me, not what I had seen on the multi colored map.
    thanks,

  • Satellite L100-P443 - GPU not recognised correctly (950 945GM)

    hello, i have a question for my laptop. the catalogue of toshiba notebook says my model has "intel graphic media accelerator 950 up to 128MB shared VRAM" installed.
    but in my device manager, inside control panel, it shows my display adaptor is "mobile intel(R) 945GM Express chipset family".
    why is this not matching with the catalogue?
    and also where can i download latest display and sound drivers for my laptop? please give me the website if you know it, thanks everyone.
    james lee

    Hello
    Like you know many notebooks use Intel platform and you can noticed that there is word family. Now the question: have you checked Intel page to see which graphics cards are listed under 945GM Express chipset family?
    In my opinion you should check Intel page to learn more about Intel hardware platform. I have no time to search it for you but believe me there is no reason for panic. To understand why this not matched catalogue you must have enough hardware knowledge and know how it works exactly.
    Latest driver you should find on official Toshiba download page. Satellite L100-P443is not known to me and it will be interesting to know in which country you have bought your notebook.

  • Extermal Toshiba USB 320 GB HDD not recognised correctly

    My hard drive does not now recognize itself as a hard drive anymore just a Cypress AT2P RC42 and so is now useless after a couple of months use.
    I have uninstalled and reinstalled through device manager. I then tried it on another computer and I have the same problem, therefore it is the hard drive and not the computer.
    It is an external USB toshiba 320GB drive which previously worked fine but now thinks its something else and nothing else.
    What can I do to rectify this problem? Please help all my data is on this drive.......

    Hi
    Check please this topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=17412 . There you will find similar discussion.

  • Captivate 7 - Incorrect Answers not allowing quiz to Continue. Buttons not functioning correctly (Clear, Back, Next). I have Knowledge Check

    I am experiencing a problem with the Quiz feature of Captivate 7. Correct answers are submitting o.k., but Incorrect answers are not. You cannot go forward with them, i.e., the program will not Continue or go to the next question with an Incorrect answer in the Assessment.
    This presentation has 15 Knowledge Check questions (0 points) and 10 Assessment Questions (10 points each).
    Also the buttons don't always work correctly, i.e. Clear, Next, Back.
    What could I try?

    Thank you for your response. No. I didn't do anything like that. I figured that I should probably divide this into 2 parts and aggregate them. That was going to work, but  I checked with one of our other users in TX. He told me that what they always do is to divide up the presentations into 2 parts. They don't aggregate them, but instead, let the LMS take care of going from the learning module (with the Knowledge Check questions) to the Assessment Module. Once you exit from the learning module, you immediately go into the assessment.
    Captivate 7 doesn't really allow for this type of test without aggregation or an LMS. You can have a pre-test, but it expects those questions to come at the beginning of the course, not to be interspersed throughout the course. I also found that using the Question Pools gave me more flexibility in moving Knowledge Check questions around using the Filmstrip.
    The other interesting thing was that the TX expert told me to remove the Accessibility Feature because, apparently, it causes other parts of Captivate not to work. I found that to be strange.

  • How can I allow a learner to review a created Drag and Drop Quiz to show the learner their incorrect/correct answers?

    Captivate 8: I have created an assessment with two multiple choice question slides and eight drag and drop question slides. After the learner views their score, I would like them to be able to review all of their answers to see where errors were made. Currently, the review quiz only shows their answers and the correct answers for Multiple choice question slides. Ideally, I would like a review of the drag and drop question slides where the incorrect choices are outlined in red or something to this effect. I appreciate any insight and suggestions!

    Sorry, D&D is not a normal question slide and I can only recommend logging a feature request. I would really like to be able to choose whether an interaction is reset or not, because this problem doesn't exist only for D&D but for all learning interactions as well.

  • Quiz Results Analyzer results not displaying correctly

    We are using Adobe Captivate 6 and posting quizzes to a local server (configured with the .php files.) When we review quiz results using the Quiz Results Analyzer, some of the data is correctly reported. However, the Pass/Fail is not working right (either everybody who takes the quiz passes, or everybody fails.) Also, we are not seeing a total score.
    Is there any tutorial for correctly configuring all of the quiz preferences, so that we get the results we are looking for?

    Thank you for the link. I have viewed this video in the past.
    The issue I'm having is that, in spite of setting the the quiz options for reporting, the data that is received in the xml files is not correct, therefore, it is not being correctly summarized in the Quiz Results Analyzer.
    (It would also seem that the screen name I set here is not retaining its modifications.) 

  • Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly.  The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anyth

    Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly.  The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anything.  I have taken my car to my local dealer but they say the Radiosat is working ok?

    Hello there stidhambr15,
    I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't quite get the device going again, I recommend restoring the device.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
    iPhone and iPad: How to remove the SIM card
    http://support.apple.com/kb/ht5163
    iPhone 4 (GSM model)
    iPhone 4S
    Cheers,
    Sterling

Maybe you are looking for