Quiz review options

Hi... Is there a way to set the review questions option to review only the questions in the quiz (capitivate 5)... I have a couple activities in the course that I used questions, but don't want the user to be able to review these.. I want to be able to review only the questions on the quiz... Does this make any sense?

One workaround you might be able to try is to use Conditional Advanced Actions to immediately skip any non-Quiz slides when doing a Quiz Review.
You'll need to have these Conditional Advanced Actions fire OnSlideEnter of any non-quiz slides to check the value of the System variable that tracks the number of quiz attempts. I usually only allow the user to Review Quiz once they have used up all their allowed quiz attempts (so that they don't use the Review Quiz to find out the answers BEFORE they finish all attempts). So you can check that the number of attempts has been reached and then skip the slides as needed.
It will mean you need to get your hands dirty with Advanced Actions, but Lilybiri's blog has plenty of soap and water for that...

Similar Messages

Final Quiz Review in Cap 6

This used to be a problem in Cap 5.5:
You have 5 scoreless reinforcement questions in a module prior to a final quiz.
Learner takes final quiz and results page has review option. The review includes the reinforcement questions, as the first question sets the beginning of the quiz scope.
I don't want the learner to review the initial reinforcement questions. I'm not clear if this is addressed in Cap 6. I've read about pre-tests but not sure if that is the approach. It sounds like in 6 the first question still determines start of quiz scope.
I want to have learner review incorrect final quiz questions only and retake the quiz.
Hopefully this can be done without a bunch of custom coding.

Review will not get you back to the pretest questions, so that could perhaps be a possible feature in CP6.
The Quiz scope changed, user is not leaving the scope until th score slide is visited.
But Review is still designed to be done after all quiz attempts, you will not able to have another quiz attempt after Reviewing the question slides.
Lilybiri

Editing Quiz Review

Can anyone help? Once a quiz has been run you have the option tor eview your answers. When going through the review any incorrect answers are displayed in black boxes. Is there a way these black boxes can be removed as it really does not look very nice. Also there are 3 buttons during the quiz review but the Clear and Submit do nothing and as such are redundant. Can these buttons be removed? thanks for any advice/help

Hi there
Unfortunately there isn't much you can do aside from logging a feature request to ask for a change in a future version.
Some things are possible to change by exporting the Captivate to Flash. But I'm not sure these survive the trip. I don't use Flash, so can't really speak to that.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Quiz Review

Hi there,
I have a quiz set up and when the user finishes it, whether they pass or fail, i want them to be able to review their answers but when they do, it goes back to the first question but there is no way for them to move on to the next question. . . any ideas?
Many thanks,
Ian

Use the Skip button on question slides to navigate to the next question during Quiz Review. Tick this option for each question under Quiz Properties.
You can use a free widget to hide the Skip button during the quiz:
http://blogs.adobe.com/captivate/2009/09/widgets_to_streamline_your_qui.html

Formatting the Quiz Review Area

Is there a way to re-format the font, background, size or any
other appearance aspects in the quiz review area? I know how to
change the messages presented in this area via the Quiz Manager,
but need help with changing the font size, etc.
Speedy reply appreciated - as this is the last touch to a
project due tomorrow. Thanks!

Hi pewinggrim and welcome to our community
Unfortunately, there is very little you can do with this.
Pretty much what you see is what you get. Aside from the text, you
can't really control formatting.
Sorry... Rick

Next button only for quiz review

I searched, with no luck, for a way to only have the "next" button visible on quiz reviews. I would like it hidden during the quiz, becuase I don't want back or skipping possible. Also, hiding the playbar in the skin.
Thanks,
Brian

Jabir, why should you create an advanced action from that shared action? It will be always the same action that is applied, no need to create a shared action IMO? At least if you time that shape button for the rest of the project. If you want a shape button on each slide, the shared action has sense, because you have one parameter: the shape button. And in that case there is no need at all to create an advanced action from that shared action, just apply that shared action directly to the On Enter event of each question slide. It has the advantage over advanced actions that you don't have to create multiple advanced actions each with a different label, and seems also not to increment the filesize in the same way.
And moreover I think you should post a correct action: the system variable is not CpQuizReview mode but: cpInReviewMode and since it is a toggle, the possible values are 1 or 0, not 'one'. Above the preview of such an action.

I create an id. on review option when i enter visa card and security code, it always gives an error msg "Invalid Secruity code". but i use this code for money withdraw from ATM and for shopping also. plz tell the solution ????

i create an id. on review option when i enter visa card and security code, it always gives an error msg "Invalid Secruity code". but i use this code for money withdraw from ATM and for shopping also. plz tell the solution ????

The code they are asking for is the last three digits of the number on the back of the card (you don't use this when using an ATM or presenting the card in shops).

Captivate 5 quiz review not showing correct answers when loaded to LMS

Hello All. I would really appreciate some help please. Despite the quiz review working correctly when published, i.e. both 'your answer' and 'the correct answer' captions appear in the review, on loading to LMS the review caption does not show the 'the correct answer is' , but instead 'you did not answer this question completely'.
Any ideas why this should be the case? I've attached screen shots of my quiz preferences for completenes.
Many thanks in advance.
Janey

Do the same modules evidence this behaviour when published and played outside the LMS, e.g. from a web server or on your hard drive?
If not, it's possible that some setting in the LMS is over-riding what happens at playback. You could try checking the box under LMS Customisation for Never Send Resume Data and see if that seems to make any difference. If the LMS is maintaining a record of some previous attempt at the same module then turning off Resume Data might show that up.

Quiz Review--how can I change/customize the buttons in CP7--now showing "back" and "skip"

Hi,
I am using CP 7 and giving learners the opportunity to review their quiz questions. The review works fairly well, but the buttons at the bottom are not correct. Should say Back and Next or Continue. I don't see a master slide for this, like the Results master slide, where I can edit. Have not found anything useful yet under Object Preferences. Also would be nice to position them. Thanks.

I never show the Next button on a question slide, but drag it under the Clear button, so that it becomes only available during Preview. A skipped question cannot be answered anymore when coming back, it is only confusing. For the same reason I will rarely allow backward movement. Only with the option 'Submit All' it is possible to retake questions within the same Quiz attempt.
Question Question Slides in Captivate - Captivate blog
Question Question Slides - Part 2 - Captivate blog

Branching Quiz: Review Quiz shows ALL questions and MaxScore includes too many scores

I'm using Captivate 6 (trial version) and I am testing out the branching capability following this tutorial ( http://www.youtube.com/watch?v=C-_Ja8vlZQw). The branching is working, but if I get to the end of my quiz and then select 'Review Quiz', it shows ALL the slides, including the ones that should NOT show up because the user selected options that didn't trigger them.
Also, it looks like the Maximum Score on the results slide includes the scores the user could get on slides they never see because of the branching :(.

It has been a while since I tested this, but it did work for me. I suppose you are using version 6.0.1.240? Because I had some issues before the patch. I will check again if you confirm the version. And you are sure to have checked Branch aware in Quiz Preferences?
Lilybiri

Quiz Review Message

I am new to Captivate and I'm having trouble with my non
graded quiz inside my program. I can't get the review message for
the remediation if the answer was wrong to come up. I have know way
of knowing if I'm setting it up wrong or if there is a glitch in my
program. I found the tab for feedback like "Try Again" but I need a
larger space to put the information that contained the correct
answer. Can someone please run down the steps to making this work?
Thanks!

In a survey question, (Captivate 3) there is an advanced
option for answer choices that allows you to check 'show feedback
message'. I believe this would allow you to provide as much
feedback as you wanted - and then the user can continue on to the
next question/section.
I'm sure there are other ways to do this as well- it seems
Captivate always has about 4 ways to do 1 thing.

Quiz review images not showing

Hi there
I'm using Captivate 6 and for some reason, when reviewing the quiz, I can't see the 'correct' and 'incorrect' images showing which answers the user got right / wrong.
I've checked the settings and everything appears to be the same as previous projects. Can you tell me if this is a bug or is there something I may be missing?
Cheers
Julie
Update - I think it must have been a little bug. I sorted it now. In case anyone has the same issue what I did was remove the option for users to review the quiz and save the project and close Captivate. Restart Captivate, open the project and then add in the option to review and save. That did the trick.

Hi Rod
I'll try that next time if it happens again.
I sorted it now. I did removed the option for users to review the quiz and save the project and close Captivate. Restart Captivate, open the project and then add in the option to review and save. That did the trick.
Cheers
Julie

Using the Quiz Review functionality in Captivate 5

I’d like to have a more robust question review in the Captivate 5 quiz I have.
In previous versions of Captivate I could create a quiz, then in the quiz settings click the “Allow user to review quiz” to allow for more robust question review information.
I would then, in each question, double-click (or get properties) for each individual question review area and craft a response. Generally pointing the student to the lesson and slides they need to review in order to get the correct answer for the question.
Can you do this in Captivate 5? All I can see/access is the global review area response which affects all question review areas equally.
Thank you,
TPK

Hi Lilybiri,
Thank you for your response. Here is what I meant when I referred to "loop back"....
It might be better phrased by saying that in Captivate 3 I could use the "go to slide" behavior to "jump to" the same slide I am on. This basically reloads the slide. So, if (in Captivate 3) I am on slide 6 (which is a multiple choice question) and I am in the Advanced answer menu and I select "jump to slide" I might see:
slide 1
slide 2
slide 3
slide 4
slide 5
slide 6
slide 7
slide 8
And, if I want to, I can select the slide I am on (in this example, slide 6). From the student point of view, when they select this wrong answer, then click to advance, slide 6 reloads.
In Captivate 5, when I select Advanced answer and use "jump to slide", this is what I see:
slide 1
slide 2
slide 3
slide 4
slide 5
slide 7
slide 8
There is no option to "jump to" the slide that I am on (in this case, slide 6). (It looks like in Advanced Actions I might be able to pull this trick off, but I am uncertain as to how to use the controls and haven't the time to do a lot of tests.)
You are correct about the work flow. It is difficult for me to change my work flow habits. It seems to take me longer to set the slide items and their characteristics, but I do see the potential in Captivate 5 and overall I like the stability and functionality. Adapting to the (very) different workflow while producing content for a demanding department is a challenge. I'll get used to it over time.
Thank you for your response and the linked information.
TPK

Adobe Captivate 5.5: Quiz Review for Correct and Uncorrect answers

Hello,
While making a quiz on Captivate 5.5, I couldn't set a review for correct and uncorrect answers. This in order to explain the correct answer.
The review area only appears when the question is not answered. I would like to know how I can fix this or a simple trick to make text appear only when reviewing the question.
Thanks!

Hi and welcome to the forum,
For Quizzes you can customize the immediate feedback by editing the Success/Failure captions. However for Review, if the user has given an incorrect answer the Text Caption has always the same content, it will indicate the given answer and the correct answer. Out of the box there is no possibility to adapt this Review message so that is more personalised for each question.
If you do not mind some more work, I blogged about customising the Review messages. Feel free to have a look:
Customise review messages
Lilybiri

Unintentionally entering Quiz Review Mode

Hi all.
I'm using Captivate CS5.0 as part of elearning suite 2.
I am outputting to a scorm compliant, AS3, Flash 10 file.
I am designing a module in which we have learning content (a narrated powerpoint), interspersed knowledge checks (not graded), and an end of lesson quiz (graded). The problem is that when one re-enters a question more than once, the question enters review mode.
This is a little difficult to describe, so I'm going to walk through of the flow of events:
1) User enters question and then leaves question, either by getting it right or wrong.
2) User navigates to a point before the question
3) User takes the question again (doesn't matter if they get it right or wrong)
4) User navigates to a point before the question and attempts to retake it again and it enters review mode:
I would prefer it if the users could take the question as many times as they want without entering review mode. I'd be happy to disable review mode completely, or to keep it in, but only enter review mode if my participants click the button on the very last slide.
Any recommendations, suggestions, what have you, would be appreciated!

You've tripped over the Quiz Scope issue. This has been explained many times on this forum. If your user enters Quiz Scope (starting at the first scored object) and then leaves it again, the quiz is frozen and they get Review Mode.
The solution: Just place a scored button on the first or second slide of your project to extend the quiz scope.

Quiz review options

Similar Messages

Maybe you are looking for