Quote Conversion issues

Hi
Quotes created pre or post Ecc6 are not copying into contract correctly.
First Issue:
For example: The quote created today , when copied into contract, the contract did not copy in the billing plan.
Second Issue:
Quote created pre ECC6 release, when copied into contract, contract had different prices for the line items than on the quote.
This seems to be infrequent, not all quotes are resulting in copying errors.
These are the issues.
If any body knows what causing this Please give throw some ideas.
I would appreciate for the earliest responses.
The way I was trying to figure it out is the following:
I have created the new documents Quotes and Contracts when I compared the Billing dates in the Billing plan tab dates looks fine.
Same way for the Pricing issue from the Quote to Contract for the specific materials which has the issue, the prices were copying from the quote to contract as same.
I didn't find any price differences.
Is there any other way to approach to reslove this issue and I can't able to replicate the same issue in other boxes
Thanks
ANGKS
Edited by: ANGKS on Sep 2, 2008 8:20 PM
Edited by: ANGKS on Sep 2, 2008 8:32 PM

Hi Ravi,
I checked the copy controls from the quote to contract its fine and even document types.
But i didnot understand where i need to check Price Type field.
Could you please explain to me a little detail.
Thanks
ANGKS

Similar Messages

  • Conversion issue in encoding in PI

    Hi,
      I am having a problem in conversion issue for encoding. Let's have a detailed look into the scenario first.
    Scenario: SNC->PI (through Proxy)->MQ (through Receiver JMS adapter)->SeeBeyond (It's a middleware system).
                   Here from SNC, data are coming into PI as in UTF-8 encoding, whereas all the systems shown in the above flow are of ISO 8859_1 format. Hence UTF-8 needs to be converted into ISO 8859_1. PI does this conversion in Receiver JMS adapter. CCSID has been set to 00819 which is for ISO 8859_1 encoding. But the beginning of the xml, it remains still UTF-8, like below:-
      <?xml version="1.0" encoding="utf-8" ?>
    Whereas the content of the xml has already been converted into ISO 8859_1 by Receiver JMS adapter. Now let's see the problem now.
    Problem: After the data been passed in SeeBeyond, the mapping fails in SeeBeyond, since SeeBeyond tries to look at the XML tag from the beginning and it found it's in UTF-8 as per he tag above. Then it tries to map it in UTF-8 format whereas the content is in ISO 8859_1, so mapping fails in SeeBeyond. Please note, here allthe systems except SeeBeyond are just bypassing the data, no mapping been introduced in anywhere in the systems except SeeBeyond.
    Workaround: Is there any other chance where we can change the tag header from UTF-8 to ISO 8859_1 in Receiver JMS adapter itself in PI like this:-
    <?xml version="1.0" encoding="iso 8859_1" ?>
    This might resolve our problem I think. Any suggestions would be appreciated.
    Thanks and Regards
    Soumya

    Hi Stefan,
                Thanks for your reply. I have gone through the link you have specified. Ya, that's the other way to resolve that issue in that case. But here we have asked the receiver system (SeeBeyond) to change the encoding part in their mapping. Because changing the coding part in SeeBeyond is less time consuming than adding a new Bean in JMS adapter. Our problem got resolved by changing the mapping in Receiver end. Thanks anyway for your valuable reply.
    Thanks
    Soumya

  • Umlaut Conversion issue in Sender communication channel SAP PI

    Hi Gurus,
    We are facing issue while conversion.
    umlaut Conversion issue in Sender communication channel that is reason channel not able to pic the file from the path.
    Sender CC error:
    Value of incoming field is too large. Segment:'IMD', Field:'7008', MaxLength:'35', value:'Plssvvkbecher Lübzer 0,4 (1280Stk p' DESCRIPTION: The length of the field value is too big !
    Actually field contains 35 Chars only the value is  : 'Plssvvkbecher Lübzer 0,4 (1280Stk p'
    We tried with “ISO-8859-1” if the field value is less than 35 characters it is able to converting.
    Please help me out from this issue.
    Thank you.
    Regards,
    Jittu.

    Hi Jittu,
    Have you tried using the codepageconversion bean in the modules under the sender?  It would be like:
    AF_Modules/TextCodepageConversionBean with a parameter of Conversion.charset and a value of utf-8.
    Regards,
    Ryan Crosby

  • Language conversion issue in PI7.1

    Hi,
    My sceanrio is file to Idoc. Am facing language conversion issues.
    For example one of the field in the source file is having the value "Différence sur net". And in the IDOC field the value is appearing as "Différence sur net".
    With the same data I have done file to file scenario with and without content conversion and the output is coming correctly as "Différence sur net".
    I have enabled Unicode check box in RFC destination also in XI server. But still its coming "Différence sur net" . Please advice how can I get the target field value same as that of the source field vale.
    Can anyone help me to sort out this issue?
    Thanks.
    Dinesh

    Hi,
    In Channel try with using the File type: text and encoding : UTF-8.
    I think this will solve your issue.
    Thank you,
    Siva

  • Currency conversion issue in SPM. We are getting incorrect results with SPM conversion function from one of the document currency to USD.

    Currently we are using SPM 2.0 version and we have been facing currency conversion issues.
    Please help me in following aspects.
    1) Where actually currency conversion happens in SPM. Is it the global program which does the conversion or other way.
    2) We have conversion issue for one of the currency where conversion function is giving incorrect results when converting from one of the document currency to USD. here The respective document currency is considering the 1:1 ratio with Dollar which is actually incorrect.
    3) We have verified in both BI side(currency tables) and even ECC side.
    Please help me in understanding this issue and let me know if you need more information on this.
    Its an production issue and appreciated your immediate inputs.
    Thanks
    Kiran

    Hi Arun,
    The following information may be helpful to you.The SSA_HELPER_PROGRAM has options regarding currency settings.
    EXCH_RATE_TYPE: This flag governs the exchange rate type which will be used for currency conversion in data management. For example if RSXAADMIN contains an entry EXCH_RATE_TYPE = „ZSPM‟ then the conversion type used for currency conversion is ZSPM. The default value for the exchange rate type is „M‟. More details can be found in the note 1278988.
    CURRENCYCONVERSION: By default data management converts all the measures in transaction currency to reporting currency and copies over to the corresponding measure in reporting currency. If the measure in reporting currency is already available in source it might be desirable to disable the currency conversion. To disable the conversion you can make an entry CURRENCYCONVERSION = „ „ in the table RSXAADMIN. This can also be achieved by running the program SSA_HELPER_PROGRAM with the option DEACTIVATE_CURRENCYCONVERSION. The conversion can be reactivated by running the same program with option ACTIVATE_CURRENCYCONVERSION.
    UNITCONVERSION: Similar to above. To deactivate unit conversion you can use the program with option and DEACTIVATE_UNITCONVERSION and to reactivate ACTIVATE_UNITCONVERSION. By default both the conversions are switched on
    EXTERNAL_CURRENCIES: Normally most of the international currencies are stored with two decimal places however certain currencies do have 0 and 1 decimal place too. For example JPY has 0 decimal places. SAP internal format stores even these currencies with 2 decimal places and at the time of display it changes the value to right decimal places. In case a file from external source is loaded to SPM it might have the format with 0 decimal places in the file. To convert it to SAP standard format post processing needs to be done on this value. If that is the case you can set the flat EXTERNAL_CURRENCIES = „X‟ in the table which will enable the post processing for these values. This flag can also be set and reset using the helper program using the option TURNON_EXT_CURRENCY_FORMAT and TURNOFF_EXT_CURRENCY_FORMAT.
    Kind Regards,
    John Harris
    Senior Support Engineer, SAP Active Global Support

  • V7 Conversion Issues

    I'm trying to run them all down. Template got nuked but I
    restored it.
    For some reason, there is no baggage folder in the project
    mgr. pod. I found a broken link to a baggage file and thought maybe
    I just forgot to add it but when I went to find tjhe baggage
    folder... no seeum. The rhbag.apj file is there and looks to have
    all the baggage file references. So, I added the file manually,
    after reading about some RH6 issues (I converted fromn 5 to 7). I
    re-published but the file still did not copyh to the output folder.
    Any ideas?
    Another isuse is with numbered lists; they appear in the
    WYSIWIG view but numbers disappear when previewed or published.
    This may be some funky style sheet thing but I was simply using the
    number tool in the format menu.
    Flummozed for now.

    quote:
    Originally posted by:
    Peter Grainge
    On baggage files, you need to appreciate there are two views
    of Project Manager. See the icons above the pod and the extreme
    left icon is switch. You can either see Baggage Files in the
    classic way or see them in the folders where they reside.
    On the numbers disappearing, try changing the style sheet. If
    that brings them back it will confirm that something in the style
    sheet has got messed up.
    Super, thanks. That view toggle is the issue; hadn't messed
    with it. I am. theoretically, back to a nominal condition,
    post-conversion.
    Back up those projects first!!!!!

  • Quota generation issue

    Hi Friends,
    We are trying to generate a specific quota for selected employees by using Time evaluation. Now the requirement is to generate the quota from the time evaluation period start date till the end date of FY.
    I.e.
    Quota 10 - 01.04.2010 to 31.03.2011 - 2.5
    Quota 10  - 01.05.2010 to 31.03.2011 - 2.5
    We had assigned a time type with the quota & generating with the time evaluation internal calculation result from period balance table.
    But the issue is seperate line items for every month is not getting created. Instead the quota is getting increased or replaced in the same line item.,
    Would appreciate your quick help on this...
    Thanks
    NK
    Edited by: IBM Functional on Apr 28, 2011 9:30 PM

    This functionality is as per SAP standards because, ideally, one would not run time evaluation for May in April. Time evaluation is to be run every day till the end of that day (or till the end of the current month). So when we look at your scenario in that light, we get the following results:
    April run:
    Quota 10 - 01.04.2010 to 31.03.2011 - 2.5
    May run (it adds the quota to the April row item):
    Quota 10 - 01.05.2010 to 31.03.2011 - 5.0
    If the scenario in your organisation is to run time evaluation up to the current date or current month only, don't worry about this aspect. As long as evaluation is not run for future periods, you should not have an issue.
    If, however, you want to run evaluation for the entire year in advance (something which should not be done), you can still try the following work-around:
    1. Modify user exit HRPTIM03 - go into one of the implementations - maybe 005 or 008, can't recall;
    2. Take the assistance of an ABAP consultant to pass the rule that - when the quota is generated, it's validity start date and deduction start date values are to be changed to the date of generation. This is the only way by which a new row item will be generated in IT 2006 (and the ABWKONTI cluster table) instead of appending the quota into the existing row.

  • Conversion Issues

    I am upgrading software.  I used to use MS Office Pro 2003--> now 2007.  In converting documents from 2007 into Acrobat Pro 8.x, I was having a problem with the page numbers not getting converted properly.  For example, I use Page x of y at bottom of docs and the conversion was giving Page x of x.
    SO, I figured it could be time to upgrade to 9.0 pro.  I am currently using the trial version.  Well, I no longer have the problem above but I have another bigger problem.  The conversion is changing the fonts of most text that is centered.  I could live with that some of the time, however, certain documents must retain the specific font I use.  This is pretty much a deal breaker if I cannot fix this.
    Any thoughts?
    Many thanks and Happy Halloween.

    Ok, I figured out the CAUSE of the issue.  If a font is regular and not bolded in the font box, it converts correctly when bolded by the "B".  However, if it is bolded through the bold box, it converts to another font.  SO, is it word or adobe that is the culprit??  Therefore, what is the SOLUTION?

  • Currency conversion issue while creating PO from Shopping cart

    Hello Experts,
    I'm facing an issue in SRM during Limit purchase order creation from Limit shopping cart.
    Scenario:
    Shopping cart was created on 1st of June and Approved on 20th June & Po was created on the same day. But the currency conversion is no ware matching and couldn't able to trace out the same. I have tried several times to replicate the issue it never done in test environments.
    But the PO is creating with refer to Vendor currency. For example if SC was created in USD and vendor order currency in EUR then PO is created in EUR.
    the relevant notes were already updated in the system and it is working fine when the SC is created and approved on the same day.
    Please give me some idea how to fix this issue.
    Is there any way to make SC currency is priority than Vendor Order Currency while creating PO?
    Regards
    Pratap J

    Hello,
    Read information available in KBA 1862453.
    It mentions this issue.
    Regards,
    Ricardo

  • Crystal Data Conversion Issue (Error converting data type varchar to datetime)

    Hi,
    I can run stored procedure without error in SQL Server using my personal credentials as well as database credentials.
    I can also run Crystal Report after connecting to Stored procedure without error on my desktop using my personal credentials as well as database credentials.
    But when I upload the crystal report in BOBJDEV and when I run using database credentials report fails saying that "Error in File ~tmp1d1480b8e70fd90.rpt: Unable to connect: incorrect log on parameters. Details: [Database Vendor Code: 18456 ]" but I can run the crystal report successfully on BOBJDEV using my personal credentials.
    I googled (Data Conversion Error Message) about this issue & lot of people asked to do "Verify Database" in Crystal Report. So I did that, but when I do it I am getting a error message like this:
    Error converting data type varchar to datetime.
    Where do you think the error might be occurring? Did anyone faced this kind of issue before? If so, how to resolve it?
    (FYI, I am using Crystal Reports 2008, & for stored procedure I have used SSMS 2012 )
    Please help me with this issue.
    Thanks & Regards.
    Naveen.

    hello Naveen,
    since the report works fine in the cr designer / desktop, we need to figure out where you should post this question.
    by bobjdev do you mean businessobjects enterprise or crystal reports server? if so please post this question to the bi platform space.
    -jamie

  • PSE 8 upgrade album conversion issue

    I upgraded my system to Windows 7 and since I was going to have to reload everything anyway, I upgraded to PSE 8 at the same time.
    Before the upgrade I saved my catalog files to my external drive and then moved them back to the C:\Program Files\Adobe folder  I put it there because I didn't see a catalog folder under the Elements Organizer folder
    Anyway, I then converted my catalog - renamed it "My Catalog 7.0" to differentiate
    The conversion says it was good and upon inspection all meta tags and albums seem okay.  The issue is that it didn't bring in the images from May 2009 onward.  I know those were in the catalog in 7.0 and had tags on them.
    Any sggestions on how to get those images (with their metadata) into PSE 8.0?
    Susan

    Thanks John
    You were right, I pulled the wrong file to convert (the one I used to convert 6 to 7)
    Thankfully I had a back up and was able to restore my correct 7 catalog.  All is good now.

  • Non English characters conversion issue in LSMW BAPI Inbound IDOCs

    Hi Experts,
    We have some fields in customer master LSMW data load program which can
    contain non-English characters. We are facing issues in LSMW BAPI
    method with non-English characters Conversion. LMSW steps read and
    conversion are showing the non-English characters properly with out any
    issue. While creating inbound IDOCs most of the non-English characters
    replaced with '#' and its causing issues in creating customer master data in
    system. In our scenario customer data with non-English characters in
    the first name, last name and address details. Any specific setting
    needs to be done from our side? Please suggest me to resolve this issue.
    Thanks
    Rajesh Yadla

    If your language is a unicode tehn you need to change the options  like IN SAP you need to change it to unicode  in the initial screen Customize local layout(ALT F12) options 118  --> Encoding ....

  • Currency Conversion Issue

    HI experts,
    i have an issue with my currency report,
    where user want see the sales volume data converting from CAD to US $.
    when i checked the query the conversion type is Avg rate M source to CAD and the Target currency is CAD only.
    but when he execute the report he want to see the volume data in USD $.
    and when i execute the report i can see below error.
    Could not find any data to display. This might be due to the current selection of variable or filter values.
    can some please help me out this issue.
    thanks
    Raj

    Hi venu
    thanks for the post,
    there's no selection criteria being used by the user, has web link, once he click on link, he directly checking the report.
    so there's no section screen available.
    and there's no variable created for the  currency conversion type .
    here my requirement is to display currency in USD $ from CAD $.
    target currency maintained as CAD in RSCUR tcode.
    how would i do this,
    and again the same report is being used by CAD user also, so view shouldn't be change for the both users.
    what im thinking is
    is there any possibility to create variable on currency to select the required currency dynamically by user in selection screen
    please let us know possible solutions like without changing the view for CAD users
    please let me know for more info
    regards
    raj

  • Unicode MDMP conversion issue with document management table.

    Hi,
    We are in a process of doing a unicode conversion for our ECC 6.0 MDMP non-unicode system. We have completed the scans and we found close to 14 million words not assigned to the codepages.
    Then we checked at the table level which table has the highest number of words. There is one custom table ZQMDOCS which is used to store documents (MS-word) documents those are test procedures for our labs.
    If we see the MS-word document in non-unicode we are able to get to the document and just did some dummy assignment and completed the import and on our unicode system if we try to open the document it is opening in a readable format.
    So the issue is the data what is being stored in the document is in english but the formating which is done is read as a special character in a unicode system and in SAP it stores raw data.
    Please suggest ways to resolve this issue or any possible workarounds for this. This is a very critical table ( 43,000 documents & close to 14 million words not assign to the code page)
    Thanks
    Junaid.

    Hi Venkat,
    Thanks a lot for your immediate response.
    The InfoObject 0DOC_TYPE was without conversion exit by default. but when data coming from R/3 it is converting and sending to BW So that's why i am planning to use conversion exit "AUART" in the info Object.
    I checked data in R/3 using RSA3 it is showing sales document type as "OR" and for the same transaction data when i checked in PSA it is showing as "TA".
    Could you please let me know if there any other options.
    Thanks in advance,
    Dara.

  • File Content Conversion Issue

    Hi ,
    My Scenario is File to FIle having  Sender  .CVS using File Content Conversion
    The sender file is coming below as an example,
    a,b,"c,d,e",f
    Here I need to consider Double code value "c,d,e" as a single field value using File separator as COMMA(,)
    Please guide me how to achieve this type of file using FCC with file separator COMMA.

    Hi Dilip,
    We had a similar problem where the name for eg: "John,Smith" when written into a .csv file were considered as "John","Smith" as two different entities instead of one. The solution was we used  the character quotes " before and after the name field  message mapping before it is sent to channel for .csv conversion as shown in the screenshot. Now it is treated as one single filed instead of two.
    Hope this helps!
    Thanks,
    Divya.

Maybe you are looking for