R/3 -- CRM -- MSA

Dear Colleagues,
I have done with Initial load from R/3 to CRM online. Now to get the MSA working, I need to download data to CDB.
Where can I find the step by step document for the same, if there is any? Any standard SAP document course.
I searched on help.sap.com, but its just in brief. I am also searching on best practices website, bute in meantime if you guys aware of anything, please do let me know.
Appreciate your help.
Regards
Milind

Hai Milinda,
You need to download the customizing object to trasnfer your data to CDB
http://help.sap.com/saphelp_crm40sr1/helpdata/en/1d/09d1eb13d711d6999e00508b6b8a93/frameset.htm
THe above link shows all the customizing objects you need to transfer to CDB

Similar Messages

Creation of MSA Sandbox for migation from CRM MSA 40 to CRM MSA 70

Hello community,
We are planing an upgrade from CRM MSA CP 4.0 SP 08 to CRM MSA CP 7.0.
As we know that one of the biggest issues is the code migration, we want to setup a sandbox system.
The idea is to install a repository server and a MDW in 7.0, then put the 4.0 repository backup to the 7.0 repository server and
start the CMT (code migration tool). We have installed the landscape already, but if we want to install the CMT wer ge the message, that the MDW ist not installed on the machine.
The question that we have , is our plan ok, or do we need to install a 4.0 repoitory server and make the update of the repository server later on ?
As i cannot find a proper description for the steps i want to ask you, what steps are correct ?
If anyone made some experience already, it would be great if you could share them.
Thank you very much
Frank

Hello
You are mistaken. CMT should be run only from 4.0 MDW machine, this tool can not be run from 7.0 MDW machine.
Please refer to the note 1087949 for the issue mentioned.
Regards
Shankar

BW- CRM MSA: Job is cancelled when Generic variant is used

Hi Gurus,
We are trying to download BW Reports on Mobile Sales App. The implementation is working perfect when we create variants in BW and then fetch data in CRM.
But now we want to restrict data according to territory of the Mobile User. This is to be done with the help of "By Terr. ID" subscription, but when we use a generic variant and request data, the job is cancelled in BW system saying "Logon for BW user failed when starting a step."
Pls help as it very very very very very very urgent!!!

Sim, segue o dump.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          07.02.2011 09:20:01
Error analysis
    Short text of error message:
    Process PSAPROCESS, variant ZBRPCHAIN_LEVEL1_2LIS_11_VASTI is not schedu
    led waiting for event RSPROCESS D6OVUGNYV55HIR2Y3JEML7XT6
    Long text of error message:
     Diagnosis
         Process PSAPROCESS (variant ZBRPCHAIN_LEVEL1_2LIS_11_VASTI) needs
         to be started. According to the process chain maintenance, it needs
         to be scheduled while waiting for event
         ZBRPCHAIN_LEVEL1_2LIS_11_VASTI D6OVUGNYV55HIR2Y3JEML7XT6. However,
         this is not the case.
     System Response
         The chain is cancelled.
     Procedure
         In order to complete the chain run, follow these steps:
         1. Ensure that Start Using Metachain or API is selected in the
             variant maintenance for the start process. By doing so, you
             ensure that the chain is not restarted.
         2. Schedule the process chain.
         3. In the log view for the process chain maintenance, choose View
             -> Merge Active Version, and end the incorrect process using
             the respective context menu entry.
     Procedure for System Administration
    Technical information about the message:
    Message class....... "RSPC"
    Number.............. 006
    Variable 1.......... "PSAPROCESS"
    Variable 2.......... "ZBRPCHAIN_LEVEL1_2LIS_11_VASTI"
    Variable 3.......... "RSPROCESS"
    Variable 4.......... "D6OVUGNYV55HIR2Y3JEML7XT6"

CRM - MSA - Authorization Management Tool

Hi All,
I have an issue with the AMT, I did the following steps.
1. Protected the Business Object
1. Created a token for BOOPPORTUNITY.
2. Assigned the token to a role.
3. Assigned myself to the role.
4. The BOOPPORTUNITY still did not work for me.
5. Ran ConnTrans.
6. I removed myself from the role.
7. Deleted token assign to role.
8. Deleted role.
9.When I check to verify the token/role were removed. The token was still in the assigned field. But the role is gone.
10. Now it say, Can not delete token after it was assigned to a role.
11. These changes have went to the CRM Server.
Any ideas on how I can removed that token, from the role that does not exist?
Any feedback will be greatly appreciated, I need a response asap.
Jeanell

Hi,
I know there's been a while since you post your issue, but, do you find any solution to your problem? I'm having the same.
Thanks in advance!
Enric

CRM MSA 4.0: Instant Reporting

Dear all,
when I run Sales Transactions --> Search; the system display a list with result and, all date fields have a corrent format (dd/mm/yyyy).
If I use mouse right-button on the list, I can export the list into excel sheet, but, the date fields not have the correct format (mm/dd/yyyy).
How can I change the date format before generate sheet?
Thanks,
Andrea Ponzio.

hi,
When u right click on the list, there is some doXXEvent() that grts trigerred in the corresponding webpage of the jsp. plz check the date format there, and if required change it.
regards
anubhav

How can I customize tooltip in CRM-GUI and MSA

Dear Expert,
I want to customize tooltip in CRM-GUI & MSA.
I found the problem that description length of field is CHAR20.
So, it's too short when define the meaning.
For CRM-GUI, normally have no tooltip in drop-down list field.
can i customize to use tooltip or any trick.
For CRM-MSA, there are tool tip show, but it show the value in field that the same wording. Can I customize to show more.
Any help will be appreciate.
Siriporn T.

Dear Expert,
I want to customize tooltip in CRM-GUI & MSA.
I found the problem that description length of field is CHAR20.
So, it's too short when define the meaning.
For CRM-GUI, normally have no tooltip in drop-down list field.
can i customize to use tooltip or any trick.
For CRM-MSA, there are tool tip show, but it show the value in field that the same wording. Can I customize to show more.
Any help will be appreciate.
Siriporn T.

Msa/crm upgrade from 50sp06 to sp11: smq1 be empty ?

Hello,
we upgrade our crm/msa from 50sp06 to sp11.
Now I want to know if the clients must have replicated
all data from msa to crm before upgrade or is this
also after upgrade possible ?
The same question is for crm-server, outbound-queue:
must this be empty before upgrade ?
Thanks for help.
Best regards
Gerd

Hi,
only in case of sBDocs which have been enhanced since SP06 there could occur some problems when replicating data with a not fitting structure.
But for my understanding only then there would be a problem when BDocs with the new structure are imported in a DB still holding the old structure.
In other words data from Mobile still holding the old structure should be imported in the CRM system which already holds the new structures without any problems.
As it cannot be guaranteed that the CRM outbound queues (smq1) are empty at a particular point of time the following steps need to be performed:
- stop all the queues (smqr)
- run upgrade in CRM system
- prepare and send Mobile upgrade package (including new TPS.NET file) via middleware (upgrade console)
- restart all queues (smqr)
==> running conntrans on the Mobile clients will result in importing the data with old structure (which still was in the CRM outbound queue), then replacing the MSA application with the new version, and finally importing new data from CRM in the new structure
Regards,
Wolfhard

Collisisons in a MSA CRM 4 SP8 - CRM 7 SP4 upgrade

Hello everybody,
I have run the MAR Upgrade tool CRM 7.0 SP4 on a CRM MSA 4.0 SP8 landscape. In total 11 Change Lists have been imported. Each change list caused approximately 1000 collisions which is in total 11000 collisions. I am a bit surprised by that amount of collisions. Does anyone have the experience if so many collisions are normal and that it is worthwhile to proceed?
Some other questions:
- can it be that the CMT changelist is also a reason for collisions of the later imported SAP CLs?
- does each of the 11 CLs run into the same collision, e.g. if we have changed a SAP owned object that each of the 11 CL runs here into a collision, which would mean that we have actually only ca. 1000 collisions to resolve instead of 11000?
Thanks in advance,
Regards,
Raquel

Thanks for your help Shankar,
Finally we have realized that the result: 11917 collisions, was not the number of the non-resolved collisions.
If you perform the following SQL statement on ARS_DB, you can get an overview about the collisions:
select state,count(*) from collision group by state
state 0 means non-resolved collisions
state 2 means resolved collisions
In fact, we only have 67 in state 0.
Regards,
Raquel

Error while installing new com+ component SAP CRM Mobile Transfer 5.0

Hello experts,
I've upgraded crm/msa from 50sp6 to sp11. In SP11 there msa/mas use dot.net framework
2.0 .
For this I have to upgrade the commstation with note 1065337, but after deleting
the com+ component DOTNET.TransSrv I cannot reinstall the new MsgTransServer.dll,
I get error:
you do not have permission to perform the requested action. If security is enabled on the system
application of the targed computer make sure you are included in the appropriate roles.
Has anybody similar problems while upgrading this ?
I've checked MS-note 909444 for new user rights, but didn't help.
Thanks Gerd

Hi Siva,
I've registered the dll with command line execution as described in
note 1036377. This should solve the problem.
If you have still problems with admin rights on the server have a look on
note 1036377.
Best regards
Gerd

BP Data replication from CRM to R/3

Hi All,
I could not see the BP replicated to R/3. The status is processing for 'BUPA_MAIN' type of BDOC.
-I have set RFC (not trusted RFC)
- At PIDE
CRM->R/3 [ type A (classification) is mapped to 0001 (Account group)]
and vice versa.
Waiting for any sugessions.
Regards,
Eddie

Hi,
Admin console (subscriptions based on rep.objects & publications) is for the CRM outbound process, based on CRM changes -> cannot be used for the initial load.
The download objects can be used for initial loads, and this in three directions: CRM-> R/3, R/3-CRM and CRM->MSA. If you wish to download data from CRM to R/3, select CRM as the source site and R/3 as the destination site in an initial load.
Normally if your RFC settings and filters are defined corrrectly, you should get an indicator that the download is in a running state. After that you can check the queues (smq1 & smq2) and the bdocs (smw01) for the results of the download.
hope this helps,
Michael.

Is CRM Middleware Expertise Required if no R/3 Is In Scope?

Hello CRM Community,
I'm an XI developer, and I'm trying to get a handle on exactly when CRM Middleware (& thus a Middleware Resource) is required, and when it is not.
If a customer is implementing CRM 5.0 (with IC Web)in a landscape with non-SAP applications, would they necessarily require a Middleware consultant?
And if so, to what extent would that requirement be reduced in comparison to an implementation which interfaces to R/3?
Thanks in advance,
Jimmy

Hi,
CRM middleware is used in CRM whether or not the system is linked to other systems (SAP or non-SAP). CRM is based on it. Eg. whenever you create or change an object in CRM, a bdoc is created which contains the data.
The question is whether you'll need to use, influence or change the middleware in your project:
Image having integration with R/3: then you'll need the middleware for setting up the distribution (initial/delta load) between CRM & R/3. But as long as you stick to the standard solution, this will be very easy to setup.
Imagine having integration to other systems: then you'll need the middleware to interface to them (which can be done using idocs or XML).
Imagine having a CRM-MSA implementation: then the middleware is used to send data to the MSA client. This means setting up the data-distribution to the clients, which can be quite complicated.
Imagine having a stand-alone CRM system with an IC webclient and flows limited to the CRM system: then a middleware consultant won't have to much work.
Michael.

What is the use of guid in CRM?

Hi ,
what is the use of guid in crm.
there is nothing like this in r/3.if the data is to flow in from r/3 to crm or crm - r/3 is do we verify the guid.partner guid or product guid.
please make me understand this.
thank you,
hun

GUIDs are system generated unique keys which identifies CRM objects (campaigns, sales documents, business partners, products etc.). CRM & MSA works on GUIDs. Most of the table relationships are defined on GUIDs.
Important CRM tables:
COMM_PRODUCT : Products
CRMC_T077D : customer account groups
CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
CRMD_ORDERADM_H Business Transactions CRM
CRMD_ACTIVITY_H Activity
CRMD_OPPORT_H Opportunity
BUTOO : Customer details
BUT001 BP: General data II
BUT100 BP: Roles
BUT150 BP relationship: Attribute table (test
different
BUT_HIER_TREE Business Partner Group Hierarchy
CDBC_T_PRODUCTID Mapping: Product Id
CDBD_ORGMAN Business transaction - organizational unit -
set
COMC_PRODUCT General Product Settings
COMC_R3_FIELDS Assignment of R/3 material master fields to
CFOP
COMM_CATEGORY Category
COMM_CFGMAT Basic Data for Materials
COMM_HIERARCHY Category Hierarchy
COMP_TYPES Hierarchy Tool: Comparison Type Check
Table
CRMC_CPRICPROC Customer Pricing Procedures
SMOKVBEZ15 Assignment employees to positions
All transactions are uniquely identified by their guids internally
Transaction numbers are not unique
System calls a function module GUID_CREATE to create a unique GUID everytime you create a transaction.
Whenever you are creating some transaction programatically you will have to first create a unique GUID for the transaction by calling GUID_CREATE.
Look at What is GUID in CRM & its significance please? maybe it helps
<b>Please, Reward Points.....</b>

WAR file and Configuration guide for CRM xMSAHH required

Hello experts,
Please provide us with the Congfiguration guide for CRM xMSAHH(Mobile Sales for Handhelds) 4.0 and CRM xMSAHH(Mobile Sales for Handhelds) 5.0.
We referred to SAP Note 788036,but the link mentioned is not valid.
http:
service.sap.com\instguides -> SAP Components -> SAP Solutions for
Mobile Business -> Mobile Sales for HH (with CRM) ->
MSA for HH 4.0 (with CRM)
Also we need a WAR file(CRM MSAHH) to run the application on Mobile Client MI2.5.
Could anyone provide us with the link or the file for the same and also the CRM backend configuration guide?
Thanks,
Himanshu Limaye

Hi Himanshu Limaye,
Kindly request you to have a look into the NOTE : 871779 , which basically gives all the details needed.
If still any clarification need, please revert the message back , will be ready to help
Regards,
Anand.

MSA 4.0 Development

Hello Experts,
I have moderate development knowledge in CRM MSA 5.0, which is based in VB.NET framework.
Currently I am working on CRM MSA 4.0 and I need to enhance some functionality using MAS. Since this is VB based, there are some differences from version 5.0.
Can you please guide me how to approach the development e.g. UI development, generation, testing, debugging?
If you could please share some documents on this, it will be relly great and helpful for me.
Thanks in advance,
Warm Regards,
Pijush

Hello All,
Thank you for all of your help.
I stopped the MAR central service and restarted the Visual environment. It worked.
Now I will be starting the actual development. Before that MAS generation settings are important. I have put the generation settings below.
Please let me know whether this is correct. I want to generate with generate all option to check whether everything is fine before starting a change.
Regards,
Pijush
NOTE: Wherever there is an option for checkbox, I have mentioned this as Checked if it is checked, otherwise I have left it blank.
Common
     Use common profile     :     Checked
     Profile     :     Debug
     Save Generation List     :     Checked
     Generation List folder     :     C:\Program Files\SAP\Mobile\bin
     Use incremental generation     :
     Clear Runtime objects     :
UI
     Project     :     MSA
     UI Application     :     MobileSales
     Runtime file name     :     MSA
     Template Folder     :     C:\Program Files\SAP\Mobile\framework\templates\
     Target Folder     :     C:\Program Files\SAP\Mobile\framework\GenApps
     Visual Basic for applications     :     Option chosen
     Visual Basic     :
     Generate All     :     Checked
     HTML Files     :     Checked
     Class Files     :     Checked
     Repos Files     :     Checked
     Project File     :     Checked
     Locale files     :     Checked
     Include additional debug code     :     Checked
     extended logging     :
     Automatically detect lost popup tilesets     :     Checked
     remove previous content of selected project     :
     perform backup before removing     :     Checked
     Make DLL     :
     Register on local machine     :     Checked
     Languages     :     English
BO
     Project     :     sfabol
     Industry template     :     WBIT
     Runtime file name     :     sfabol
     Target folder     :     C:\Program Files\SAP\Mobile\BOL\Apps\
     Generate All     :     Checked
     Generate Project files     :     Checked
     generate repository files     :     Checked
     include tracer code in project file     :
     remove previous project files of selected project     :
     Backup project files before removing     :     Checked
     remove previous repository files     :
     Make DLL     :
     Register on local machine     :     Checked
     Languages     :     English
Messages
     Target Folder     :     C:\Program Files\SAP\Mobile\BOL\Apps
     remove previous content     :
     Languages     :     English
Edited by: pkduari on Feb 5, 2010 8:00 PM

PPR configuration for MSA

Hello Guys:
Do you have any guide which specifies the correct Partner Product Ranges configuration for MSA application, I have been looking into some guides but I have not been able to get a guide or document which explain in detail how this configuration works. I have not been able to download accounts to my HH and I think the PPR configuration must be set correctly to be able to download this configuration.
Hope you can help me out!!
Hugo

Hi,
yes there is a senario configuration guide which clearly explains how to do PPR sttings for BP and products, it has been modified for MSAHH5.0 but is also applicable to MSAHH4.0. please follow the following link.
Http://service.sap.com/instguides -> SAP Components -> SAP Solutions for Mobile Business -> Mobile Sales for Handheld (with CRM) ->MSA HH 5.0 (with CRM 4.0, SP 09)
It will definetely help
Warm regards
Anubhav Bhatia

R/3 -- CRM -- MSA

Similar Messages

Maybe you are looking for