Msa/crm upgrade from 50sp06 to sp11:  smq1 be empty ?

Hello,
we upgrade our crm/msa from 50sp06 to sp11.
Now I want to know if the clients must have replicated
all data from msa to crm before upgrade or is this
also after upgrade possible ?
The same question is for crm-server, outbound-queue:
must this be empty before upgrade ?
Thanks for help.
Best regards
Gerd

Hi,
only in case of sBDocs which have been enhanced since SP06 there could occur some problems when replicating data with a not fitting structure.
But for my understanding only then there would be a problem when BDocs with the new structure are imported in a DB still holding the old structure.
In other words data from Mobile still holding the old structure should be imported in the CRM system which already holds the new structures without any problems.
As it cannot be guaranteed that the CRM outbound queues (smq1) are empty at a particular point of time the following steps need to be performed:
- stop all the queues (smqr)
- run upgrade in CRM system
- prepare and send Mobile upgrade package (including new TPS.NET file) via middleware (upgrade console)
- restart all queues (smqr)
==> running conntrans on the Mobile clients will result in importing the data with old structure (which still was in the CRM outbound queue), then replacing the MSA application with the new version, and finally importing new data from CRM in the new structure
Regards,
Wolfhard

Similar Messages

  • MSY does not start after upgrade from 50SP6 to SP11

    Hello experts again,
    after upgrading from 50sp6 to sp11 I cannot start MSY.
    I've implemented note 1099457 - AMT is starting now,
    but MSY still does not start.
    Has anybody some experience what this could be ?
    Thanks and best regards
    Gerd

    Hi,
    as I assume the AMT is installed completely new when doing a SP upgrade because it is a standard tool which you cannot enhance. Therefore it is running properly.
    Regarding MSY you need to perform a full generation within MAS (Visual Studio) after changing the generation settings to MSY (similar to MSA) because the runtime files like MSY.DLL need to be fitting to the new SP11 framework dlls.
    Regards,
    Wolfhard

  • Crm Upgrade from Version 4.

    Hi All
    We are currently planning to upgrade our Crm version from 4 to version 5 or possibly version 7.
    We have extensivley modified the web ic bsp application and I am gathering information on what is involved in a system upgrade.
    If anyone has any experience with later versions of the web ic and what is involved in a technical upgrade can you please mail me details and any documents you may have.
    If anyone has a copy of the web ic cookbook for version 5 or later can you mail me this also.
    My address is [email protected]
    Thank you

    Hi Darren,
    The biggest change for the webclient is that there is now the framework bsp application IC_BASE which is the top-left-bottom part of the webclient (toolbar, navigation bar, broadcasting bar, etc) and the application itself (the webclient) is bsp application CRM_IC is now only the workarea of the screen.
    the reason for this is that in newer versions of CRM ( as op 2006s) everything is based on the webclient technology (bol/genil).
    This means that you now have different types of navigation (through different bsp applications), so that you runtime repository now contains more navigational links (specified sometimes with the bsp application in front of the view).
    As of version 5.0 you can run ICWC in Internet Explorer 7 (be carefull there are some notes) and you need to add a user parameter to you user (or directly in the call of the ICWC) CRM_ICWC_DESIGN  (value DESIGN2003). Also please take into account that this parameter is used in the webclient, but SAP does not supply it in it's table of parameters (TPARA) so you have to add it yourself (only possible via debugging in tx SE16.
    Hope this helps a bit.
    Micha
    ps. The cookbook can be found under service.sap.com/crm-inst CRM 5.0 --> Core components

  • CRM Upgrade from 7.0 to EhP1 Error - The requested resource does not exist

    Hello All,
    We have recently upgrade our pilot system in CRM from CRM 7.0 to Ehp1. The upgrade was successful.
    However, when I login into the WebUI, I get an error message as follows:
    404 Not Found
    The requested resource does not exist
    Details: Go to main page of this application
    I got in touch with the Basis team and tried to activate some services through SICF that were deactivated because of the upgrade. But we still encounter the above error everytime I tried logging into WebUI.
    I kindly request to provide some pointers towards the resolution of the same.
    Thanks and regards,
    VSK.

    Hi,
    please try to activate all SICF services under sap->bc->bsp.
    If needed deactivate them and activate afterwards again to be sure all services are active.
    Good luck
    Kind regards
    Manfred

  • CRM Upgrade from SAP CRM ABAP 6.0 to EHP3 FOR SAP CRM 7.0

    Hi,
    While downtime I got the following error.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    XPRA ERRORS and RETURN CODE in SAPR740XPRA90000035.CRE
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1 ETP109 version and release : "380.09.41" "740"
    1 ETP198
    2 EPU126XPost-import methods for change/transport request: "SAPK740XPRA90000035"
    4 EPU111 on the application server: "fmgcre"
    2 EPU122XPost-import method "BEFB_AFTER_IMP" started for "BEFT" "T", date and time: "20140612120701"
    1AETR012XProgram canceled (job "RDDEXECL", number "12070100")
    1AEPU320 See job log"RDDEXECL""12070100""CRE"
    1 ETP111 exit code : "12"
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    XPRA ERRORS and RETURN CODE in SAPR740XPRA90000036.CRE
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1 ETP109 version and release : "380.09.41" "740"
    1 ETP198
    2 EPU126XPost-import methods for change/transport request: "SAPK740XPRA90000036"
    4 EPU111 on the application server: "fmgcre"
    2 EPU122XPost-import method "BEFB_AFTER_IMP_ENH" started for "BEFE" "T", date and time: "20140612120701"
    1AETR012XProgram canceled (job "RDDEXECL", number "12070101")
    1AEPU320 See job log"RDDEXECL""12070101""CRE"
    1 ETP111 exit code : "12"
    >>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<<
    XPRAs are application reports that run at the end of an upgrade.
    Most XPRA reports have a report documentation that explains what
    the report does and how errors can be corrected.
    Call transaction se38 in the SAP system, enter the report name,
    select 'Documentation' and click the 'Display' button.
    >>> The problematic XPRAs are mentioned in messages of type PU132 above <<<
    In the TR: SM37 the job RDDEXECL is aborted, the result is the short dump OBJECTS_OBJREF_NOT_ASSIGNED_NO
    I am currently using SUM ver 1.0 SP9_8
    Has anyone had this error? about every helpful tip would be very grateful!
    Thanks
    Georg

    Hi,
    The problem we could solve, we modified the function block BEFB_AFTER_IMP.
    Thanks
    Georg

  • How to create new field while upgrading from CRM 4.0 to 7.0

    Hi ,
    How do we create new field on UI and store data into existing field in database?
    Is there any option in AET to skip the creation of new field in the database table ?
    Custom field is already created in GUI and database table while using CRM 4.0
    Now, after upgrading to 7.0 EHP3 , I need to bring this field on the UI .
    Using AET may create new field again in the database table.Please suggest.
    New filed needed to be created in Marketing Campaign Element Header data.
    Thanks
    Jayasri

    Hi Jayasri,
    As a custom fields are already there in crm 4.0. You don't need to use AET again to add field.
    These enhancements still exist after the upgrade. Dependent on the enhancement object and type some manual steps are necessary.
    For example regarding a single field enhancement for the BP the whole framework is enhanced after the upgrade. There is only one manual step to bring the field on the relevant view(s) via the UI Configuration Tool. For whole BP tables some more manual steps are necessary, these steps are described in the note 1069791 - CRM WebClient UI for EEW enhancements (reference to more notes regarding the EEW after the upgrade).
    For set types, we need to generate UI With the help of the UI configuration tool the settypes could become visible in the Web UI.
    I didn't understood your scenario, can add little more information why you want to add field by AET if available in DB?
    Refer
    FAQ - SAP CRM Upgrade from release 4.0 to 7.0 
    Regards,
    Arjun

  • Changes to Bex Reports during CRM Upgrade

    Hi,
    What kind of changes are involved in correction/adjustments for BeX Reports during  CRM Upgrade from 5.0 to 7.0?
    (If possible, please let us know the effort that may be involved for correction of 1 BeX report?)
    Thanks & regards,
    Uma.

    Joseph,
    By tracking changes... what is it that you are looking at ?
    Options include :
    1. Monitor the transport log for objects created...
    2. Monitor RSZGLOBV table for when changed option ( not sure if one is available )
    Usually the CMS ( Change Management System ) otherwise known as the transports help maintain changes..
    Arun

  • Tetsing post CRM Upgrade

    Hi Folks,
    We here would soon be starting work on a CRM upgrade from 5.2 to 6.0. The client has some custom code. What should be the testing strategy post upgrade?
    Are there any specific tests that need to performed on standard code? Or do we just test the custom code thoroughly? Any suggestion or documentation would be appreciated.
    Regards,
    Munish

    Munish,
    We just recently completed a CRM 52 to CRM 60 in our development system and basically my testing strategy was the following:
    1.  Run through core business process scripts on the system to validate they still work
    2.  Pay special attention to areas you customized and note any breaks.
    3.  Compare end to end processes to existing on QA system.
    I personally think you still need to do a full test of your processes after the upgrade in the areas that you use.  If you don't use a piece of functionality, obviously don't test that.
    Now during my unit testing, I paid attention more closely to areas where we deviated further from standard, but still made sure the "standard" areas worked.
    The key part is to prevent end user issues before they happen, which can only be accomplished through proper testing.
    Take care,
    Stephen

  • CRM Upgrade

    Hi,
    We will be starting our work on a CRM upgrade from 520 to 600 soon. CRM is linked to R3 as backend. The client does not have too many custom objects at the moment, which is good :). There is limited interaction between EP and CRM. At the moment I am not sure if its through iViews or BSP or Java. But could you please tell me about the areas I shoud be focussing on from the upgrade perspective? What are the critical areas when you upgrade to 600 from 520? Any tips or points to obseve would be really helpful.
    Thanks.

    Hi,
    The differences between 5.2 and 6.0 should be very limited. One thing I know of is that you need to switch to Java mapbox - but that is of course only if you are currently using the server side groupware integration.
    /Anders

  • IS-U CCS CRM Upgrade

    Hi Guru's,
    My client is going for IS-U CRM Upgrade from CRM 4 to CRM 7, and I have been told to do initial assessment on SAP CRM, I need your help if you can provide me some useful tips, information or documentation related to this would really help.
    Thanks in Advance,
    Best Regards,
    MAnju

    Hi
    Your assessment should start with the customer requirement.  What are the objectives of your client?
    - if your client wants AMI to be implemented, then you need SAP CRM 7.0 and ISU Enhancement Pack 4.
    - if your client needs customer financial supply chain management (collections, payments etc), you are good with CRM 2007 with ISU Enhancement Pack 2.
    Ramana

  • Error in GENSTATUS during upgrade from CRM 4.0 to CRM 2007

    Dear experts
    We have 12 errors in GENSTATUS after upgrading our CRM system from 4.0 to 2007. I don't know how to solve them - I had a look at SDN forum, OSS notes without success. Our system was previously connected to MSA but we want to turn it off part of this upgrade.
    Below are the generation errors. I couldn't solve any of them:
    CNBCCPSAP00070            CG          GNREP                  E              F              Could not find active BDoc for TRANS_ID CNBCCPSAP00070 - Identification not possible via TransID / Name
    CNBCCPSAP00070            CG          LUTAB                   E              F              Could not find active BDoc for TRANS_ID CNBCCPSAP00070 - Identification not possible via TransID / Name
    MSV_COUNTER               CG           GNREP                  E              F              Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
    MSV_COUNTER               CG           LUTAB                   E              F              Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
    0000000001CG 5ABEB7BA9F5BD3118A5F00A0C9AA8D71                PUBLI                    E              F              Database access error using table SMOG_GFUGR
    F000000272CG F3CFBBF7F736D844995523584B67E937     PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK
    F000000273CG CDF390E3E874144F8399B0F88E37F9F2      PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK
    MSV_COUNTER               HT           GNREP                  E              F              Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
    MSV_COUNTER               HT           LUTAB                   E              F              Could not update reference to old MSG-segment 4156822E5E3B1C1CE10000000A1552B4
    0000000034HT B49F577F7D5BD3118A5F00A0C9AA8D71  PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK_IL2
    F000000273HT 42411AD9608668DAE10000000A1552B6    PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK
    F000000272HT 42411ADC608668DAE10000000A1552B6    PUBLI                    E              F              Generation error REPL_TEMPLATE_SUBCHECK
    Thanks a lot in advance for your help
    Best regards
    Stephanie

    Hi Stephanie
    Did you find a resultion to your genstatus issue.
    We are in a similar issue currently - we have the following errors
    CNBCCPSAP00070            CG
    CNBCCPSAP00070            CG
    DOC_HEADER                CG
    S000000290CG 98FBC48FBE4A0040888E14E1C27C7262
    CAMPAIGN_WRITE            CG
    Look forward to your response on this
    Regards
    Eddie

  • Upgrade from CRM 5.0 to 7.0 not possible ?

    Hello CRM-experts,
    yesterday I was on presentation of CRM IC-helpdesk, and the mentor
    explained that there is no upgrade-strategy from sap for the crm 5.0 to 7.0.
    Is that true ?  Ins't it possible to upgrade my crm 5.0 SP11 to crm 7.0 ? (included with mobile sales ?)
    We use crm-online (quotations, orders) and mobile sales .
    Thanks for response,
    Gerd

    Gerd,
    That is wrong about the upgrade path, your SAP rep and Kai mis-understand what no-direct CRM upgrade path means.
    Here is the deal:
    If you are using CRM 5.0 with the SAP GUI/PCUI/IC webclient based applications then your upgrade migration is the following:
    1.  Technical upgrade of CRM 5 to CRM 7.0
    2.  Manual conversion of SAP GUI/PCUI/IC webclient enhancements from CRM 5 to the CRM 7.0 webclient UI.  This only applies to the UI enhancements, and most of your backend BADI's provided they did not violate any CRM enhancement concepts will still work.
    If you review the PAM at http://service.sap.com/pam or read the upgrade guide on service marketplace you will see this is the case.  It even states on the PAM that CRM 5.0 is a source release for the upgrade to CRM 7.0.  There is no need to go to CRM 2007(6.0) first.
    Honestly there is not a "huge difference" between CRM 2007 & CRM 7.0 except that CRM 7.0 is a refinement of CRM 2007.
    Take care,
    Stephen

  • Problem with Billing Engine after upgrade from CRM 5.0 to CRM 7.0

    Hello together,
    The system  of our customer has been upgraded from CRM 5.0 to CRM 7.0. After that some problems occurred regarded the billing.
    In the Billing Due List a dump occurs when clicking on an item and then on conditions
    Dump message: No function module can be found named "/1BEA/CRMB_DL_PAR_O_DERIVE" however.
    (Other classes are  new generated after the upgrade)
    During the Analysis we looked to the billing engine navigator:
    In the Billing Engine Navigator (Transaction: BEFN_F1) the Generation Log shows the following:
    We have re-generated the Object PAR in CRMB->DL->Feature->PAR. But this shows the above displayed error message. How can we add value to the Placeholder?
    Another question is which impacts does it have if we regenerate the complete billing engine for CRMB with transaction BEA_CONFIG_F1 (Configure Application)?
    BR, Anne

    Hi Nawanit,
    we checked the key figure settings and categories. Everything is maintained correctly.
    Since we work with MRP areas we also checked the "Global Parameters and Default Values for MRP Areas" in APO Customizing: The "Default values for Stock Transfer Documents" is set to "1" = Stock Transport Requisitions for MRP Areas.
    BUT: When I try ot change this indicator I get the following message no. /SAPAPO/MRPA000:
    "Process. w. stock transp. requisitions is not supported in standard sys. The process with stock transport requisitions will be supported as of SAP R/3 Enterprise Core Release 4.70 with SAP R/3 Enterprise Extension Set 2.0. ".
    As far as we work with ECC 6.0, EHP4 this message makes no sense.
    Does anyone have another idea?
    Thanks
    Jan

  • Upgrading from CRM 3.1 to 5.0

    Hi experts!
    Can anyone of you tell me about risks and scope (what must be done) regarding upgrading from CRM 3.1 to 5.0? Do you have any links to good documentation?
    Thanks, Camilla

    Hello Camilla,
    For the moment, to upgrade to CRM5.0, it will be a rampup project : https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000654884&.
    Regarding the upgrade, have a look in the 'Upgrade Master Guide mySAP CRM 2005 (SAP CRM 5.0)'
    https://websmp106.sap-ag.de/~sapidb/011000358700005413872005E.
    Best Regards,
    Frédéric

  • Upgrade from CRM 5.0 to CRM 7.0 MY Worklist  Worklist

    Hello,
    we're upgrading from CRM 5.0 Interaction Center  to CRM 7.0. The client is using MYWORKLIST in CRM 5.0. In CRM 7.0 I found
    following three options for Worklist in Navigational Bar:
    CH-WORKLST
    CT-WORKLST
    ICM-WRKLST
    Please let me know which one is closer to MY_WORKLIST.
    Thanks,
    Saeed
    Edited by: Saeed Ahmad on Aug 19, 2010 7:52 PM

    Hi,
    We have resloved issue using  my activities from PRO* roles.
    Regards,
    Saeed
    Edited by: Saeed Ahmad on Oct 12, 2010 4:45 PM

Maybe you are looking for