R12.1 upgrade from 11.5.10CU2 with 11g

Hi hsawwan,
I have some doubts about R12.1 upgrade process.
1. If i have 11.5.10.2 with 9.2.0.8 as database then can i upgrade to R12.1 using RapidWiz and during database upgrade screen, directly upgrade from 9.2.0.8 to 11.1.0.6 or 11.1.0.7 database?
2. If i have 11.5.10.2 with 11.1.0.7 as database then can i upgrade to R12.1 using RapidWiz or i have to do patchinf for it. Means to say that can i use RapidWiz for R12.1 upgrade from 11.5.10.2 with 11.1.0.7?
3. What will be the best practice to reduce downtimwe for R12.1 upgrade ?
Regards,
Manas Prakash Gupta

Hi hsawwan,
As pre-upgrade patching for 11.5.10.2 to R12.1 upgrade, i applied a patch 4582937 which is for PRE CONVERGENCE MIGRATION PATCH. There are some steps which are need to be performed after applying this patch. Below are the steps.
1) Perform the data mapping for org and warehouse migration through the UI available in OPM System Administration.
2) Run $GMA_TOP/patch/115/sql/GMAORGMG.sql as APPS user.
3) Review any errors generated in the Org Migration for the context "ORGANIZATION" and rerun GMAORGMG.sql after fixing the errors.
4) Run $GMA_TOP/patch/115/sql/GMAITSTP.sql as APPS user.
5) Review any errors generated in the Org Migration for the context "PRE_ITEM_MIG_SETUP" and rerun GMAITSTP.sql after fixing the errors.
6) Run $GMI_TOP/patch/115/sql/gmiitmin.sql as APPS user 7) Review any errors generated in the Org Migration for the context "ITEMS" and rerun gmiitmin.sql after fixing the errors.
I am not able to understand the first point (Perform the data mapping for org and warehouse migration through the UI available in OPM System Administration).
I logged into application and under OPM System Administration i didn't find anything related to mapping. Can you just tell me how to perform these steps (Specially the first one because in others we need to run scripts only).
Thanx,
Manas Prakash

Similar Messages

DB Upgrade from Oracle 8i to Oracle 11g express edition

Hello,
As per the requirement i have to upgrade some of our application from oracle 8i to oracle 11g express edition on window base platform.
I am using import/export utility to migrate data from oracle 8i database to newly installed oracle 11g XE database. after importing i have tested my application in testing environment. It is working fine.Now I have to do this in production env. before proceeding with it.
please someone let me know what all things i have to keep in mind before execute in prod env. Like all risk,databse backup recovery, or any guidelines need to follow while upgrading lower version of oracle to 11g XE version.
waiting for your valuable inputs.

You might want to consider what other programs interacts with the database; can they still connect to a much newer db server version? Any integrations that need a dry run before going in production? Any other "ad hoc" applications, like excel, running against the db? (you could use listener.log to find out what connects to the db, but a year worth of history might be needed)
Do you have any scripts or other "loosly coupled" stuff that needs review?
Read the New features guides released between versions - there are five or six of them.
Check out the Database Upgrade forum (you could look at this as an upgrade in general from 8.1.x to 11.2), {forum:id=583}. Search the forum for previous related topics and ideas.

Error while applying patch u4440000.drv(part of R12 upgrade from 11.5.10.2)

Hi All,
Getting error while applying patch 4440000
cd $AU_TOP/patch/115/driver/u4440000.drv
ERROR:
Failed: XDOLoader.class on worker 1
Failed: CustMigrationTool.class on worker 2
Failed: XDOLoader.class on worker 3
Failed: XDOLoader.class on worker 4
Worker 2 log file:*
Start time for file is: Tue Jun 23 2009 00:14:02
adjava -ms128m -mx256m -nojit oracle.jrad.migration.cust.CustMigrationTool ak % -customer_cust -username &un_apps @ -password &pw_apps -dbconnection &jdbc_db_addr -jrad_username &un_apps @ -jrad_password &pw_apps -jrad_dbconnection &jdbc_db_addr -rootpackage "/oracle/apps/ak/" -migrationdir &fullpath_ak_mds_directory
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/jrad/migration/cust/CustMigrationTool
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Worker 1 log file:_
Start time for file is: Tue Jun 23 2009 00:14:02
adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHL_RA_ANZ_PRC_PLN_DAY -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLRAT3.rtf
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Jun 23 2009 00:14:03
Worker 3 log file:*
Start time for file is: Tue Jun 23 2009 00:14:02
adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHL_RA_ANZ_PRC_PLN_SUMM -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLRAT4.rtf
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Jun 23 2009 00:14:03
Worker 4 log file:_
Start time for file is: Tue Jun 23 2009 00:14:01
adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHLPRDWC -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLPRDWC1.rtf
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Jun 23 2009 00:14:02
Please let me know any solution
Thanks in advance
Regards,
Bhanu Chander.

Hi,
As a part of R12 upgrade.
once The Installation creates APPL_TOP, COMMON_TOP, INST_TOP and 10g Oracle Home
Now we are connected to R12 application.
Applied patch AD.A 4502962.
Run the American English upgrade patch driver
cd $AU_TOP/patch/115/driver
adpatch options=nocopyportion,nogenerateportion
Please enter the name of your AutoPatch driver file: u4440000.drv
This patch doesn't have readme it will be under cd $AU_TOP/patch/115/driver
Thanks,
Bhanu Chander

Upgrading from XP to Vista with no recovery drive.

Hello,
I plan to upgrade from XP to Vista. I have the whole 160 GB disk allocated to XP as a C drive. I have no problems in formatting it while changing to Vista.
The problem is that Lenovo gave no Vista DVD when I bought the laptop. Everything was given in the recovery partition which I formatted when I downgraded to XP. So how should I change back to Vista ?
Also I was browsing through the Lenovo Drivers website becoz I need Vista drivers once I install Vista onto the laptop. There are different versions of drivers available for my laptop's type-model, so how should I know that which one works best or which one was given in the factory installation from lenovo?

The simplest answer is to purchase the recovery cd if you were shipped with vista. The tech center can help with your purchase but they can order only what was originally shipped on the laptop. The cost is $45.00 plus s&h and local taxes.

Tip for upgrading from MBP to iMac with Leopard & Parallels Boot Camp

Here are some pointers based on my recent experience upgrading from a MacBook Pro to an iMac, under Leopard and with Parallels using a Boot Camp partition for Windows.
First, you do not need to create a Windows partition on your new computer. You will use Boot Camp Assistant to do that - it can dynamically resize your existing Mac OS X partition without destroying it. (I initially used Disk Utility to create a Windows partition but it wasn't recognised properly by Parallels and also the Mac wouldn't boot from it).
A great way to simplify getting your old installation across is to make a Time Machine backup onto an external drive. Yes, you could also use start up your old Mac in Target mode (hold down T key when you start it), then start the new Mac and copy your settings over. But in my case, the new iMac (a refurb) came with Tiger installed on it while my old Mac had already been upgraded to Leopard.
I started the new Mac using a Leopard install CD (holding down the C key while starting). Then I chose to restore from a Time Machine backup instead of installing from CD, and soon had a functioning Leopard installation on the new Mac. Well, almost.
Next I used Boot Camp Assistant to create a Windows partition on the new drive. The old Mac's partition was only 10 GB in size, but I made the new one 31.9 GB in size (so I could stay under the Windows limit of 32 GB for FAT partitions). I then quit without installing Windows.
On the old Mac, I used an external drive formatted as FAT and used Disk Utility to 'restore' my Windows partition to the external drive. Next I plugged that drive into the new Mac, and restored the external Windows partition to the new Mac's Windows partition. So far, so good. However, Parallels would not start this installation of Windows, and the new Mac would not boot into it (holding down the Option key at start-up did not show me a Windows drive).
I tried doing a repair of the Windows installation using a Windows install disk but that did not work. What did work was the following: I booted from the Window install CD, then started a new installation. I asked Windows to format the Windows partition on the new Mac, then powered off the new Mac as soon as Windows started copying files. Next, I rebooted the new Mac into Mac OS X, started Disk Utility, and again did a restore of the Windows partition on the external drive to the Windows partition on the new Mac.
The final step was to reboot the new Mac into Windows directly so that I could load drivers from the Leopard install CD. [I haven't done that yet, so I'm not sure it's necessary].
Hope this helps!

Sounds solid to me. If the Glyph was connected on a firewire port that is. This would free up the bandwith that way but actually it is hardly an issue with the Duet considering the limited inputs. But using the Glyph as a backup for your projects is good wise idea anyway.

Upgrade from ECC 6.0 with no EHP to EHP 7

Hello,
We are planning an ERP upgrade from ECC 6.0, which has no enhancement package, to EHP 7.
Can this upgrade be done :
1. Directly to EHP7
OR
2. Do we need to first upgrade to a lower EHP, for example - to EHP 5 or 6 first, and then to EHP 7?
Thanks and Regards,
Reena

Hi Reena
Yes, you can upgrade the system to ECC 6 EHP 6 or 7,
before that is any other SAP system are connected to ECC6 ?
If it is yes, Kindly refer the SAP Note, & you require to check those SAP version are supported to ECC 6 EHP 7 ?
1388258 - Version Interoperability within the SAP Business Suite
BR
SS

Can't install XCelsius Engade 2008 (upgrade from Pro 4.5) with Office XP

Dear Support,
I have purchased XCelsius Engade 2008, upgrade from Pro 4.5.
Our corporate standard is still MS Office XP on Windows XP and it won't be updated in a near future.
I can not install the product since it tells me that Office suit should be "pre-installed" first. And it is actually installed already.
I have tested the trial version before - and it was fine. It is written on the CD box that system requirements includes Office XP but it does not work. Please help ASAP!!!
And just for the information:
Trial version build no: BuildVersion=12.1.0.247 (seems to work)
Version on CD which I have purchased: BuildVersion=12.0.0.121 (refuses to install)
Thanks and regards,
Andrey

Hi Andrey,
you don't need to uninstall Xcelsius 4.5 - it's a separate product and you can install it back. I have both Xcelsius 4.5 and Xcelsius 2008 on the same machine. I am not sure why it does not recognize the Office on your machine, may be you need to upgrade your Office to a later version, I hope somebody else will have more information. May be this link will be helpful
http://myxcelsius.com/2008/07/30/office-xp-application-error-while-installing-or-upgrading-to-xcelsius-2008/
Margaret

Database Upgrade from Oracle 9i to Oracle 11g

Hi Experts,
We are running our Applications on 9i database but our Client has come out with suggestions of upgrading the Database to Oracle 11g.
Bellow is information about our platform:
JBoss 4.2.3, JDK 1.6
TIBCO Administrator- 5.4, TIBCO Designer-5.5, TIBCO TRA-5. 5, TIBCO EMS-4. 4
Oracle 9i -- Basically Using Tables, Views, Sequence, Functions & Stored Procedures.
Can anyone provide us some information for upgrade to Oracle 11g R2 and impact on work?
Any suggestions that could be given will be greatly appreciated.
Regards,
Anup

Anup wrote:
Hi Experts,
We are running our Applications on 9i database but our Client has come out with suggestions of upgrading the Database to Oracle 11g.
Bellow is information about our platform:
JBoss 4.2.3, JDK 1.6
TIBCO Administrator- 5.4, TIBCO Designer-5.5, TIBCO TRA-5. 5, TIBCO EMS-4. 4
Oracle 9i -- Basically Using Tables, Views, Sequence, Functions & Stored Procedures.
Can anyone provide us some information for upgrade to Oracle 11g R2 and impact on work?
Any suggestions that could be given will be greatly appreciated.
Regards,
Anup
Hi,
What is your current 9i version (last 3 digits) and what is your OS?
To upgrade to 11gR2 from 9i, the 9i version must be minimum 9.2.0.8
Please read
- http://download.oracle.com/docs/cd/E11882_01/server.112/e17222/toc.htm
- http://download.oracle.com/docs/cd/E11882_01/install.112/e17212/procstop.htm#BABEHGJG
Hope this helps
Cheers

Upgrade from Solaris 8 SPARC with Sun cluster 3.1u3 to Solaris 10 SPARC

Dear All,
We are planning an upgrade of the OS from Solaris 8 SPARC to Solaris 10 SPARC on a two-node active-standby clustered system.
The current major software we have on the Solaris 8 system are:
1: Sun Cluster 3.1u3
2: Oracle 9i 9.2.0.8
3: Veritas File System Vxfs v4.0
4: Sun Solaris 8 2/04 SPARC
Any pointers as to what sequence and how the upgrade should be done?
Thanks in advance.
Regards,
Ray

yes I know it can be quite complicated and complex, but Sun provided us with a detailed documentation, at least in our case Solaris 9 to 10 it was very helpful.
You might get better help in the cluster forum http://forums.sun.com/forum.jspa?forumID=842
-- Nick

Upgrade from ERP 6.0 with AFS 6.0 to ERP EHP4 - AFS 6.4

Dear all,
I've upgraded our Solution Manager to latest maintenance (all latest release/all latest Sp/all Oss notes)
I 'm unable to have a queue with EHP4 - Afs 6.4 from Solution Manager
If I define a system as SAP ERP 6 with Afs, the sol. man. give me the option to upgrade to EHP4 but 'forget' AFS 6.4.
If I define a system as Afs Server 6, the sol. man doesn't show me the option to upgrade to EHP4.
Any Idea to exit from this stall condition ?
If I choose the option SAP ERP 6.0 to upgrade to EHP4, SAPHEPI will ask me the AFS upgrade CD and all AFS Sp ?
My target is:
- ERP 6.0 SPS 16 with AFS SP8 + ERP 6 EHP4 SPS 4 with AFS 6.4 SP 2, the max possibile now.
Thanks tho who will try to help me.
Regards

Hi Reena
Yes, you can upgrade the system to ECC 6 EHP 6 or 7,
before that is any other SAP system are connected to ECC6 ?
If it is yes, Kindly refer the SAP Note, & you require to check those SAP version are supported to ECC 6 EHP 7 ?
1388258 - Version Interoperability within the SAP Business Suite
BR
SS

Upgrading from oracle 8i to oracle 11g

current Oracle version is 8i
front end is visual basic 6
OS is windows xp
client OS is windows xp
I guess this question has been asked a lot in here.
But i guess i have some extra queries here
-> I m using oracle 8i and now I want to upgrade it to 11g. Is there any complications. I mean can i simply export a dump file from oracle 8i and import it in oracle 11g using imp tool, importing everything. If not what are not imported and what are other complications and consequences.
-> My front end is vb 6 so is there gonna be any problem. If it's unsupported which version would u prefer for vb 6
-> Can i install oracle 11g in windows xp or at least can i install oracle client in xp.
-> what kind of server would you suggest for oracle 11g.
Is there anybody to help me out here as quickly as possible.
Thanx a lot
Edited by: Ishan on Jun 17, 2009 5:35 AM

8i->11g direct is not possible.
Available option: Export and import.
You can upgrade to 9i from 9i to 11g is possible.
Oracle 11gR1 Upgrade Companion-601807.1 from metalink has all the information.
Note 429825.1 Complete Checklist for Manual Upgrades to 11gR1
Note 263809.1 Complete checklist for manual upgrades to 10gR1 (10.1.0.x).
Note 316889.1 Complete checklist for manual upgrades to 10gR2.
Note 466181.1 10g Upgrade Companion
Note 601807.1 Oracle 11gR1 Upgrade Companion
419550.1 - Different Upgrade Methods For Upgrading Your Database-
Edited by: Anantha on Jun 17, 2009 1:31 PM

Upgrading from windows 8.1 with media center to 10

running in to an issue where windows 8.1 with media center can't upgrade to windows 10. when running the update troubleshooter, getting error 'PC is running an enterprise or volume licensed version of Windows 8 and cannot be updated using Windows Store"
though when running the license verifier it lists the license as a windows WMC retail version. is the issue just because it has a windows media center license? someone help please. thanks

running in to an issue where windows 8.1 with media center can't upgrade to windows 10. when running the update troubleshooter, getting error 'PC is running an enterprise or volume licensed version of Windows 8 and cannot be updated using Windows
Store" though when running the license verifier it lists the license as a windows WMC retail version. is the issue just because it has a windows media center license? someone help please. thanks
Important notes
http://windows.microsoft.com/en-ca/windows/preview-faq-system-requirements-pc
excerpt:
If you have Windows 8 Pro with Media Center and you install the preview, Windows Media Center will be removed.
Windows 10: If you're using the Technical Preview, don't install Media Center
http://www.neowin.net/news/windows-10-if-youre-using-the-technical-preview-dont-install-media-center
excerpt :
One such feature that is absent from the Technical Preview is Windows Media Center, but some users have restored this feature by using the product key that they purchased for use in Windows 8.1. Unfortunately, this has created some issues for these users,
which has led Microsoft to caution against doing this.

Yosemite upgrade from Mavericks left me with a white screen.

i dont think the install completed And now my computer won't start up. It shows the apple icon and a progress bar and then just does nothing. I've turned it off and on a few time with the same result.
Any ideas?

Try resetting the SMC. If that does not work, restore OS X from the recovery disk.
Barry

Anyone upgraded from 307 to 308 with success?

I am not able to get 308 working!! Help?
I made a Helloworld procedure and http://blabla/pls/portal30/helloworld works okay. Portal doesnot work 100%. I get a redirect to http://blabla/servlet/page?_pageid=49&_dad=portal30&_schema=PORTAL30&_mode=3&_ref=20010227183425
diag.sh is okay. Put portal doesnot work.
Is there a table in portal30 that I can modify?
null

There are several issues with migration from 6.0 to 6.2...
1) The biggest thing is the change in Identity server(5.0 to 6.1):
If you have a custom auth modules you will need to write a new one.
2) The differences in templates are minor and
you will easy find them by debugging JSPs.
3) Since portal6.2 supports both JSR168 and 6.0 API
You will be able to import your 6.0 providers and channels.
However some package names has been changed
from ".iplanet." to ".sun." and you might need to recompile
your classes(e.g. if you used IdentityAPI).
Cheers,
Alex :-)

Question: Upgrade from CS3 to CS5 with license from diff country

Hi all,
I'm thinking of upgrading my CS3 to CS5, but the CS3 license is bought from another country. So am I able to upgrade my CS3 to CS5 where CS3 is purchase in Asia Pacific and CS5 is purchase in US?
Hope can get answer soon, I'm urgently need to upgrade it but I dont want to purchase upgrade that wont work.
Thanks!
-- SU

Please contact Adobe Customer Support directly by phone. This is a User-to-User forum and no one here is qualified to authoritatively answer your question.
- Dov

R12.1 upgrade from 11.5.10CU2 with 11g

Similar Messages

Maybe you are looking for