R12 Installation on AIX (64) Dual Nodes
Hi,
I want to install Oracle Application R12 on AIX Dual Nodes.
I have 2 servers on cluster, and my need is to install the database on 1 machine and the application on the other machine.
How do i go about the installation?
Thanks and Regards
Shahrukh Yasin
Check Note: 402306.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.0) for AIX-Based Systems
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=402306.1
Similar Messages
-
R12 installation giving me error [while loading shared libraries: librt.so]
Hello ..
I am installing Fresh R12 installation on Fedora. I was doing Single node installation. Installation was going fine but at the point when it said run "autoconfig.sh" for APPS_TIER. I went to $INST_TOP/admin/scripts and ran "autoconfig.sh". After that installer showed me all the errors and when i try to see the log file.
I am getting following errors.
[oracle@aurie / ]$ ls
ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
[oracle@aurie / ]$ su - root
su: error while loading shared libraries: libcrypt.so.1: cannot open shared object file: No such file or directory
Now, I cant do anything on this machine, I try rebooting it but no matter what command i try to run i am getting above error.
Cant find any solution online.
any help would be appreciated.
ThanksHello Hussein,
I chnaged my Fedora to following ..
[root@aurie /]# cat /etc/issue
Red Hat Enterprise Linux Server release 5 (Tikanga)
Kernel \r on an \m
[root@aurie /]# cat /proc/version
Linux version 2.6.18-8.el5 ([email protected]) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Fri Jan 26 14:15:21 EST 2007
But installer is failing at the end of DB installation and it is not able to create database
==== ApplyDatabase_05092341.log ===========
Executable : /d01/oracle/VIS/db/tech_st/11.1.0/bin/sqlplus
The log information will be written to
/d01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_aurie/adcrdb_VIS.txt
Creating the control file for VIS_aurie database ...
exit_code=127
Checking for errors ...
.end std out.
***sqlplus: error while loading shared libraries: libclntsh.so.11.1: cannot open shared object file: No such file or directory***
***egrep: /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_aurie/adcrdb_VIS.txt: No such file or directory***
**.end err out.**
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
=============
============05092156.log============
Processing Disk68....
^M
runProcess_2
Statusstring Registering Database
Executing command: /R12_setup/startCD/Disk1/rapidwiz/jre/Linux/1.6.0//bin/java -DCONTEXT_VALIDATED=true -mx512M -classpath /R12_setup/startCD/Disk1/rapidwiz/jlib/java:/R12_setup/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar oracle.apps.ad.clone.ApplyDatabase -e /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/VIS_aurie.xml -stage /R12_setup/startCD/Disk1/rapidwiz -showProgress -phase reg -nopromptmsg
Log file located at /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_aurie/ApplyDatabase_05092341.log
^M
| 0% completed
runProcess_3
Statusstring Configuring Database
Executing command: /R12_setup/startCD/Disk1/rapidwiz/jre/Linux/1.6.0//bin/java -DCONTEXT_VALIDATED=true -mx512M -classpath /R12_setup/startCD/Disk1/rapidwiz/jlib/java:/R12_setup/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar oracle.apps.ad.clone.ApplyDatabase -e /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/VIS_aurie.xml -stage /R12_setup/startCD/Disk1/rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/log/VIS_aurie/ApplyDatabase_05092342.log
^M
| 0% completed ^M
/ 0% completed ^M
- 0% completed ^M
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Processing DriverFile = /R12_setup/startCD/Disk1/rapidwiz/template/adridb.drv
Running Instantiation Drivers for /R12_setup/startCD/Disk1/rapidwiz/template/adridb.drv
instantiate file:
source : /R12_setup/startCD/Disk1/rapidwiz/template/adrun11g.sh
dest : /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrun11g.sh
backup : /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrun11g.sh to /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/VIS_aurie/templbac/adrun11g.sh
setting permissions: 755
setting ownership: oracle:dba
instantiate file:
source : /R12_setup/startCD/Disk1/rapidwiz/template/adrundb.sh
dest : /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh
backup : /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh to /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/out/VIS_aurie/templbac/adrundb.sh
setting permissions: 755
setting ownership: oracle:dba
Step 0 of 5
Command: /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrun11g.sh
Step 1 of 5: Doing UNIX preprocessing
Processing Step 1 of 5
Step 1 of 5
Command: /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh
Step 2 of 5: Doing UNIX preprocessing
Processing Step 2 of 5
Executing: /d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh
STARTED INSTALL PHASE : DATABASE : Sun May 10 09:33:17 PDT 2009
Preparing environment to install databases ...
Setting LD_LIBRARY_PATH to - /R12_setup/startCD/Disk1/rapidwiz/lib/Linux -
Setting PATH to - /R12_setup/startCD/Disk1/rapidwiz/jlib/java:/R12_setup/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
Setting CLASSPATH to - /R12_setup/startCD/Disk1/rapidwiz/jlib/java:/R12_setup/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/R12_setup/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
... installing VISION demo database
FINISHED INSTALL PHASE : DATABASE : Sun May 10 09:33:18 PDT 2009
/d01/oracle/VIS/db/tech_st/11.1.0/temp/VIS_aurie/adrundb.sh has succeeded
=============
Now, I am again hitting the same issue .. whatever I try to do after this fail installation i am getting following
*[oracle@aurie 11.1.0]$ ls*
ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
*[oracle@aurie 11.1.0]$ cat /etc/issue*
cat: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
*[oracle@aurie 11.1.0]$ cd /*
*[oracle@aurie /]$ ls*
ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory -
Oracle EBS R12 installation by newbie...please help.
Dear Experts,
I wanted to learn E-Biz suite R12. So thought of installing R12 on external hard disk and use it with laptop. I googled and in our otn forums also, but i am confused about the steps which i need to do for successful installation.
My current configuration:
Dell Laptop : 4 GB RAM, 300 GB harddisk, Windows 7
External Harddrive : 2 TB (specially bought for installing EBS and my learning activity)
as per other forum post, i will increase RAM to 8 GB
I wanted to install EBS on external hard drive and access it via my laptop.
can any suggest any step by step material where i can do the installation successfully...I heard we need to install virtual box/vm ware , template etc...i am bit confused. can you please guide me to do please.. can i install VMware on usb hardrive, and then windows 7 on top of it and then ebs on top of that.....
please guide.
Best regards
PrasanthHi Prasanth,
I believe you are currently in Windows environment. Most of the production environment will have Unix i.e either Solaris, HP-UX, Linux and etc. So that is the reason you will have to install Linux for example in the VMware(Non-Oracle product) or Virtual box(Oracle product) in order to create a virtualized enviornment, and afterwards proceed with R12 Installation.
If you are wish to try installing R12 without a virtualized enviornment then you may install it on the host itself (windows environment) without installing VMware/Virtual box
You may follow the below notes for R12 Installation on different OS.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 (Doc ID 761564.1)
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 (Doc ID 761566.1)
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) (Doc ID 761567.1)
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for IBM AIX on Power Systems (64-bit) (Doc ID 761569.1)
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for HP-UX PA-RISC (64-bit) (Doc ID 762894.1)
Otherwise, if you wish to do the installation A-Z, but rather want a template of an EBS, you can follow the below note:
Introduction to Oracle VM, Oracle VM Manager and EBS template deployment (Doc ID 1355641.1)
BEST OF LUCK with your Installation
Thanks &
Best Regards -
10g rac deinstall and 11.2.0.3 rac installation on aix 6.1
Hi,
I have to perform deinstallation of 2 node 10g rac on aix and on same setup i need to install 2 node 11.2.0.3 rac on aix 6.1.
As being a newbie in this please guide me from where to find the exact documentation for the same.
Also, In linux we need to install oracleasm rpm, In AIX do we need the same?
Thanks.Following are the OS requirement for Oracle 11gr2 installation on AIX
AIX 5L V5.3 TL 09 SP1 ("5300-09-01") or higher, 64 bit kernel (Part Number E10854-01)
AIX 6.1 TL 02 SP1 ("6100-02-01") or higher, 64-bit kernel
AIX 7.1 TL 00 SP1 ("7100-00-01") or higher, 64-bit kernel
Following can be confirmed from metalink ID 169706.1 -
Getting error while applyin patch after R12 installation
I applying patch 8940108 after R12 installation. Pls. suggest what needs to be done.
Patch 8940108: Optional component(s) missing : [ oracle.precomp.lang, 11.1.0.7.0 ]
Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
The details are:
Patch 7708340:
Archive Action: Source file "/db01/opt/oracle/product/11.1.0_egebrt/.patch_storage/7708340_Jan_28_2009_11_33_00/files/lib/libpls11.a/pkv.o" does not exist.
'oracle.rdbms, 11.1.0.7.0': Cannot update file '/db01/opt/oracle/product/11.1.0_egebrt/lib/libpls11.a' with '/pkv.o'
Archive Action: Source file "/db01/opt/oracle/product/11.1.0_egebrt/.patch_storage/7708340_Jan_28_2009_11_33_00/files/lib/libpls11.a/pkv.o" does not exist.
'oracle.rdbms.rman, 11.1.0.7.0': Cannot update file '/db01/opt/oracle/product/11.1.0_egebrt/lib/libpls11.a' with '/pkv.o'
ApplySession failed during prerequisite checks: Prerequisite check "CheckRollbackable" on auto-rollback patches failed.
System intact, OPatch will not attempt to restore the system
The following warnings have occurred during OPatch execution:
1) OUI-67078:Interim patch 8940108 is a superset of the patch(es) [ 7708340 ] in OH /db01/opt/oracle/product/11.1.0_egebrt
OPatch failed with error code 74Hi;
The following warnings have occurred during OPatch execution:
1) OUI-67078:Interim patch 8940108 is a superset of the patch(es) [ 7708340 ] in OH /db01/opt/oracle/product/11.1.0_egebrt
Its mean if you have patch 8940108 on your system already and if you try to apply patch 7708340 than you dont need to apply patch 7708340,coz patch 8940108 already cover patch 7708340.
You can try this
opatch -lsinventory|grep 8940108
Regard
Helios -
Oracle EBS R12 installation problem in Windows 2003
Hi,
I am trying to install Oracle EBS R12 on Windows 2003 R2. I have installed cygwin along with required packages and also Visual studio 2005 as specified in the prerequisites of installation document.
All the validations are successful before installation but I am facing error during installation in Step3 at about 53 percent. When i checked the log file, I found that some of the files required for installation are not found in my staging area. Now I want to run MD5sum on the Staged Files.
I had downloaded md5sum_windows.txt and also run this command :
md5sum --check md5sum_Windows.txt > md5sum_result.txt
In md5sum_result.txt, I am getting error for all files. Error message is as :
oraAppDB\Disk1\data\driver\Disk1.drv
: FAILED open or read
This is repeating for all files. But i can see that the files are present in My Staging area. Do i need to set some permission for this. Please help. Desperately want to install EBS as part of perparation for my planned certification.
Edited by: 855292 on Nov 26, 2011 1:58 AM
A simple detailed Step by Step Installation Document or any good reference for the same would by really appreciated.
Edited by: 855292 on Nov 26, 2011 2:00 AMI have downloaded all the 33 files in oracle edelivery site. I have seen a post of yours regarding Oracle R12 installation on Windows XP. It mentions only some 25 files. Please do not rely on the that thread as it was for 12.0.x installation.
For R12 (12.1.1) you need to download the following files:
From: Oracle E-Business Suite Release 12.1.1 Rapid Install Start Here (Part 1 of 4)
To: Oracle E-Business Suite Release 12.1.1 for Microsoft Windows (32-bit) Rapid Install APPL_TOP - Disk 2 (Part 2 of 2)
Is it possible that contents of the zip file are lost during download because my stage area is about 39 GB . and also I have verfied all the files in edelivery site is downloaded too.
Also the error i mentioned in my last post, I can see the file in the directory but still its showing read error. Is it due to corruption of data. That would mean that I will have to download all 40 GB again :-(It is easy to verify the contents of the stage area directory without running md5sum, so please do so and post the results here.
Thanks,
Hussein -
Oracle 11g R2 RAC installation on AIX
hi,
I wana setup Oracle 11g R2 RAC on Ibm with AIX. Is there any good document or cookbook explaining step by step procedure for the installation...I'll be thankful
thanxHi;
Please check below links which is mention about 11gR2 Rac installation on AIX
11gR2 RAC installation in AIX help urgent
Re: 11gR2 RAC installation in AIX help urgent...!!!!
11gR2 RAC Installation Manual (with ASM+Rawdevice)
http://www.goodus.com/knowledge_pds/%EA%B8%B0%EC%88%A0%EB%85%B8%ED%8A%B8_11gR2_RAC_Guide.pdf
Regard
Helios -
Oracle DB 9201 installation on AIX 5L with 32 bit architecture!!
Hi,
I have installed AIX 5L on 32 bit kernel machine.
Thereafter I have installed Oracle 9.2.0.1 Database!!
But whenever I am running sqlplus or listener it gives me an error that "you cannot run 64 bit application on 32 bit machine"
but I am able to run DBCA or NETCA command from oracle home directory & it runs properly. It also create & configure the listener but due to the above mismatch it could not start!!
Can any one help !!
Regards,
IndraneelSame thread into Installation Forum : Re: Oracle DB 9201 installation on AIX 5L with 32 bit architecture!!
Nicolas. -
Oracle R12 Installation Error - Validate System Configuration
Hello,
I was doing the oracle apps R12 installation and got this error
=======================
Validate System Configuration
The post-install check inspects your system for a complete installation.
The list below shows the tests that were performed and the results.
Click on the test icon for details.
One or more of the post-install tests did not succeed for this:
Database Availability
HTTP
Virtual Directory
Login page
Configuration Upload
Help page
JSP
=======================
I’ve checked the details which are listed below.
Please help me in solving the issue :(
Configuration Upload
uploading config file at /u05/oracle/TEST/db/tech_st/11.1.0/appsutil/conf_TEST.txt
Failed upload of config file at /db/tech_st/11.1.0/appsutil/conf_TEST.txt
Database Availability
command: su dbuser -c "/tmp/RapidInstall/bin/riwTDBup.sh /u05/oracle/TEST/db/tech_st/11.1.0/TEST_erp.env APPS/APPS"
riwTDBup.sh started at Fri May 25 06:42:59 IST 2012
Parameters passed are : /u05/oracle/TEST/db/tech_st/11.1.0/TEST_erp.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /u05/oracle/TEST/db/tech_st/11.1.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /u05/oracle/TEST/db/tech_st/11.1.0/perl/bin:/u05/oracle/TEST/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u05/oracle/TEST/db/tech_st/11.1.0/appsutil/jre/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/u05/Setup12.1.1/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:/root/bin:.
LD_LIBRARY_PATH : /u05/oracle/TEST/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u05/oracle/TEST/db/tech_st/11.1.0/lib:/usr/dt/lib:/u05/oracle/TEST/db/tech_st/11.1.0/ctx/lib
Executable : /u05/oracle/TEST/db/tech_st/11.1.0/bin/sqlplus
riwTDBup.sh exiting with status 3
RW-50011: Error: - Database ORACLE_HOME connection test has returned an error: 3 command: su appsuser -c "/tmp/RapidInstall/bin/riwTDBup.sh /u05/appl/TEST/inst/apps/TEST_erp/ora/10.1.2/TEST_erp.env APPS/APPS"
riwTDBup.sh started at Fri May 25 06:43:16 IST 2012
Parameters passed are : /u05/appl/TEST/inst/apps/TEST_erp/ora/10.1.2/TEST_erp.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /u05/appl/TEST/apps/tech_st/10.1.2
ORACLE_SID :
TWO_TASK : TEST
PATH : /u05/appl/TEST/apps/tech_st/10.1.2/bin:/usr/bin:/usr/sbin:/u05/appl/TEST/apps/tech_st/10.1.3/appsutil/jdk/jre/bin:/usr/bin:/u05/Setup12.1.1/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:/root/bin
LD_LIBRARY_PATH : /u05/appl/TEST/apps/tech_st/10.1.2/lib32:/u05/appl/TEST/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads:/u05/appl/TEST/apps/apps_st/appl/sht/12.0.0/lib
Executable : /u05/appl/TEST/apps/tech_st/10.1.2/bin/sqlplus
riwTDBup.sh exiting with status 2
RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 2
Help Page
checking URL = http://erp.tez.co.in:8009/OA_HTML/help
RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
HTTP
checking URL = http://erp.tez.co.in:8009
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP
checking URL = http://erp.tez.co.in:8009/OA_HTML/jtfTestCookie.jsp
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Login Page
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.Hi,
I think my linux was corrupted :(
I've done fresh linux installation and after that the R12 installation is complete without any issues :D
Thanks for you help Hussein Sir -
Oracle e-Business Suite R12 installation
Greetings!!
I'm in the process of downloading the Oracle E-business Suite R12 software on Delivery Cloud. What I'm not so sure of is..
1. Which Files should I download for the complete installation for practise and learning purposes, because I see a string of them?
2. What are the installation instructions if you have a pentium 4, OS-Windows XP Sp3, and a 1.5GB RAM?
I would appreciate it if anyone helps me with a detailed procedure on the installation. Moreso,
3. I kindly ask for any documentated material that can help in this regard?
and
4. How to study Oracle Financial R12 effectively?
5. Lastly. I need information on how to purchase tutorials for one of the e-business suite self study materials?
Thank you in advance!!1. Which Files should I download for the complete installation for practise and learning purposes, because I see a string of them?Download Oracle E-Business Suite R12 CDs for your OS (from the first CD till the CD before the Documentation CD).
Product Pack: E-Business Suite
Platform: Microsoft Windows (32-bit)
Oracle E-Business Suite Release 12.1.1 Media Pack for Microsoft Windows (32-bit)
From: Oracle E-Business Suite Release 12.1.1 Rapid Install Start Here (Part 1 of 4), Part Number: B53824-01 Part 1 of 4
To: Oracle E-Business Suite Release 12.1.1 for Microsoft Windows (32-bit) Rapid Install APPL_TOP - Disk 2 (Part 2 of 2), Part Number: V15677-01 Part 2 of 2
2. What are the installation instructions if you have a pentium 4, OS-Windows XP Sp3, and a 1.5GB RAM?Oracle E-Business Suite Installation Guide: Using Rapid Install
http://docs.oracle.com/cd/B53825_08/current/acrobat/121oaig.pdf
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
I would appreciate it if anyone helps me with a detailed procedure on the installation. Moreso,
3. I kindly ask for any documentated material that can help in this regard?Please see the links/docs referenced above.
Also, please see Oracle E-Business Suite R12 Installation Steps on Windows XP
4. How to study Oracle Financial R12 effectively?R12 Docs
http://docs.oracle.com/cd/B53825_08/current/html/docset.html
https://forums.oracle.com/forums/search.jspa?threadID=&q=R12+AND+Study&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
5. Lastly. I need information on how to purchase tutorials for one of the e-business suite self study materials?http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=3
Thanks,
Hussein -
Oracle e-Business Suite R12 installation Media / Virtual Machine
Hello
I am quite new, can anyone help me, from where I can download Oracle e-Business Suite R12 installation Media or Virtual Machine (Windows) for learning purpose.
Thanks
Rashid Farooq1009307 wrote:
Hello
I am quite new, can anyone help me, from where I can download Oracle e-Business Suite R12 installation Media or Virtual Machine (Windows) for learning purpose.hi Rashid
please see this
you can download www.edelivery.com
https://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11250161#pack1
http://www.appsdba.info/docs/oracle_apps/R12/download_OracleR12_&_Stage.doc.
Note: 405565.1 - Oracle Applications Release 12 Installation Guidelines
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=405565.1
Oracle Applications Installation Guide: Using Rapid Install
http://download.oracle.com/docs/cd/B53825_01/current/acrobat/121oaig.pdf
You can download EBS from e-Delivery website and install a vision demo database -- https://edelivery.oracle.com/
Oracle EBS 11i/R12 Docs can be found at http://www.oracle.com/technetwork/documentation/applications-167706.html
about windows VM please google it
;) AppsmAsti ;)
Sharing is Caring -
what are the common challenges faced in oracle R12 installation
or issuesMake sure you do the following:
- Create the stage area properly
- Apply pre-req. OS packages
- Setup hostname/domainname
- Have proper permission on the stage/oracle directories
- Create users and set the path properly
Always refer to Metalink notes and the installation manual before starting the installation. -
HRMS selection at R12 installation
Hi,
Do we have an option to chose shared HRMS or full HRMS at the time of a R12 installation.I dont think we have this option as a part of the installation , but since I have not done one till now . Just wanted to know.If you choose to license HR at install time, I believe it will install in "full" mode, else will install in "share" mode.
HTH
Srini Chavali -
Hi ,
Can you please explain me , what should be the process of applying a patch
on a dual node ebiz environment .
for ex if all of my application tier(forms,reports,admin,apache etc) is on one node and my database on other node .
when applying a patch , should i be applying the patch on both nodes ? or should i be applying on only application tier node ?
is there any difference applying a patch on a single node and multinode please
kind regards
Krishfor ex if all of my application
tier(forms,reports,admin,apache etc) is on one node
and my database on other node .
when applying a patch , should i be applying the
patch on both nodes ? or should i be applying on only
application tier node ?With this configuration, you only need to apply it on the application tier node.
is there any difference applying a patch on a single node and multinode pleaseIf you have more than one application tier (more than one APPL_TOP), then you need to apply a patch on each node. -
11gR2 RAC installation in AIX fails while running root.sh on node2
Hi
We are in the process on installing 11gR2 RAC on AIX 6.1
But the installation is failing on node 2while running root.sh with the following error.
DiskGroup DATA creation failed with the following message:
ORA-15018: diskgroup cannot be created
ORA-15017: diskgroup "DATA" cannot be mounted
ORA-15003: diskgroup "DATA" already mounted in another lock name space
Configuration of ASM failed, see logs for details
Did not succssfully configure and start ASM
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: XXXXX/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
Please help
RegardsHI,
the second node (second root.sh) should not want to "create" the diskgroup data, since it is already there.
This pretty much sounds like you tried to start both root.sh (on the first node and on the second node) at the same time, not waiting for it to finish on the first node.
It is important, that before you start the root.sh on the second node, it has to be finished successfully on the first node for the cluster to update the information.
Sebastian
Maybe you are looking for
-
How do I change the defalt localion that my photos are saved it.
Lightroom is saving all my photos in the wrong folder from that I want and I can not find for the life of me where to change that in LightRoom 4? I am new to using it. Thanks so much! Martin Brossman
-
New Macbook hard drive can't locate Time Machine files of backup on external drive
I just got my hard drive replaced as it was failing. Just before I took it to the apple store I backed up my hard drive using time machine, on a separate hard drive: phew! I checked that time machine was operating fine before I took it in to get th
-
Cannot setup WRE54G ver. 3 expander to network
I had to reset my network this morning due to some weird glitch that caused my whole network to disappear. My router is a WRT310N. I have an SSID (broadcasting) and a password on my router. The problem is I cannot get my expander to connect to the ne
-
Conditional build for chm and printed doc produce different outputs
I'm using RoboHelp HTML 9.0.2.271 In my TOC, I have two "books" of topics that I want to exclude from output because the topics won't be required at this time. I right-clicked each book in the TOC and applied a condition ("Defer"). For the HTML Help
-
HT5449 How do I get Dictation to type a full-stop instead of the word "period"?
How do I get Dictation to type punctuation? The support article says that you just have to speak it in order for it to appear but I just get one long run-on sentence with the word "period" many times in the middle.