R12 Order Management Setup and API for Pick Release

Hi All,
I am doing pick release using Release Sales Order form of Order Management of Oracle Apps R12. Pick Release process is going fine , but the the status of lines are not getting updated. If we explicitly do reservations before pick release and then do pick release from Release Sales Order form, line status is being updated as pick released. If we do pick release from Shipping Transactions Form, then there is no need of explicit item reservations. Please suggest me, is there any setup steps to be done, so that i will tell the functional guys to do it.
Also I am executing the WSH_PICKING_BATCHES API for create batch and release batch, the same thing i.e the pick release process is working fine but the line status is not getting updated.
Is Release Sales Order form and Shipping Transactions Form uses different API's to do the pick release?.
If we have to do explicit Item Reservations, what is the API used?
Thanks and Regards,
Mahesh
Edited by: magu on May 1, 2009 11:59 AM

I figured out the problem. In Release Sales Order Form, we have to uncheck the Prior Reservations Only check box, so that the items will be first reserved and then pick release.
Thanks and Regards,
Mahesh

Similar Messages

  • ESYU: R12 - Order Management를 위한 Multi Org Access Control(MOAC) setup 방법

    Purpose
    Oracle Order Management - Version: 12.0 to 12.0
    Information in this document applies to any platform.
    R12의 Order Management에 대핸 Multi Org Access Control(MOAC) setup 방법에 대해 알아본다.
    Solution
    일반적인 MOAC Setup:
    1. HRMS에서 Security Profile을 정의:
    a. HRMS Management responsibility 선택
    b. HRMS Manager> Security> Profile로 이동
    c. Security Profile이 정의되어 있는지 확인 (OM responsibility 혹은 Site level로)
    d. 만일 아직 setup 되어져 있지 않다면 Operating Units를 입력
    e. 저장
    Note: 만일 위 d step과 같이 새로운 security profile을 생성하였다면 concurrent program 'Security List Maintenance'를 꼭 실행해야 한다.
    그렇지 않으면 multiple operating units가 OM forms의 LOV에 나타나지 않을 것이다.
    이 program은 multi-org access를 validating 하기 위해 사용하는 table에 data를 생성한다.
    Navigation: HRMS Management> HRMS Manager> Processes & Reports> Submit Process & Report> Security List Maintenance
    2. MO Profile Options setup:
    a. MO: Security Profile - 이 profile setting은 MOAC functionality를 활성화 한다.
    b. MO: Default Operating Unit - 이 Operating Unit는 OM forms과 report에서 default가 될 것이며, 이를 clear 하거나 변경하기 위해 LOV를 사용할 수 있다.
    Keep the MO profiles in sync:
    MO: Security Profile은 site와 responsibility level로 setting 할 수 있다.
    MO: Default Operating Unit은 site, responsibility, user level로 setting 할 수 있다.
    Application이 원하는대로 동작되지 않는것을 발견하면 이 profile options의 setting 값을 확인한다.
    3. OM setup:
    R12 upgrade 시 OM Profile에서 migrate 된 새로운 OM System Parameters를 확인:
    Order Management Super User> Setup> System Parameters> Values
    (See <<NOTE 393646.1>>-R12 Readiness Cheat Sheet: Migrated OM Profile Options)
    4. Form에서 hidden field 'Operatin Unit'를 활성화시키고 default folder로 저장:
    Sales Order and Order Organizer forms
    Quick Sales order and Organizer forms
    Sales Agreement forms
    Pricing and Availability form
    Other forms
    Note: Sales Order form에서 hidden field 'Operating Unit'를 'Show' 하기 전에 fotm안에 이 field를 위한 공간을 만들어 놓아야 한다.
    예를 들면 Customer Number field를 짧게 하거나 Operating Unit field로 이 field를 덮어씌울수 있다.
    Reference
    Note 393634.1

    Hi Larry,
    Have you considered adding the exec apps.mo_global.set_policy_context call to your connection's start-up script?
    Tools -> Preferences -> Database -> Filename for connection startup scriptNot the most flexible approach, so I'm not sure if it is appropriate for your application, but just a thought. You might create distinct connection names with different start-up scripts for each org_id.
    Regards,
    Gary
    SQL Developer Team

  • CONCURRENT MANAGER SETUP AND CONFIGURATION REQUIREMENTS IN AN 11I RAC ENVIR

    제품 : AOL
    작성날짜 : 2004-05-13
    PURPOSE
    RAC-PCP 구성에 대한 Setup 사항을 기술한 문서입니다.
    PCP 구현은 CM의 workload 분산, Failover등을 목적으로 합니다.
    Explanation
    Failure sceniro 는 다음 3가지로 구분해 볼수 있습니다.
    1. The database instance that supports the CP, Applications, and Middle-Tier
    processes such as Forms, or iAS can fail.
    2. The Database node server that supports the CP, Applications, and Middle-
    Tier processes such as Forms, or iAS can fail.
    3. The Applications/Middle-Tier server that supports the CP (and Applications)
    base can fail.
    아래부분은 CM,AP 구성과
    CM과 GSM(Global Service Management)과의 관계를 설명하고 있습니다.
    The concurrent processing tier can reside on either the Applications, Middle-
    Tier, or Database Tier nodes. In a single tier configuration, non PCP
    environment, a node failure will impact Concurrent Processing operations do to
    any of these failure conditions. In a multi-node configuration the impact of
    any these types of failures will be dependent upon what type of failure is
    experienced, and how concurrent processing is distributed among the nodes in
    the configuration. Parallel Concurrent Processing provides seamless failover
    for a Concurrent Processing environment in the event that any of these types of
    failures takes place.
    In an Applications environment where the database tier utilizes Listener (
    server) load balancing is implemented, and in a non-load balanced environment,
    there are changes that must be made to the default configuration generated by
    Autoconfig so that CP initialization, processing, and PCP functionality are
    initiated properly on their respective/assigned nodes. These changes are
    described in the next section - Concurrent Manager Setup and Configuration
    Requirements in an 11i RAC Environment.
    The current Concurrent Processing architecture with Global Service Management
    consists of the following processes and communication model, where each process
    is responsible for performing a specific set of routines and communicating with
    parent and dependent processes.
    아래 내용은 PCP환경에서 ICM, FNDSM, IM, Standard Manager의 역활을 설명하고
    있습니다.
    Internal Concurrent Manager (FNDLIBR process) - Communicates with the Service
    Manager.
    The Internal Concurrent Manager (ICM) starts, sets the number of active
    processes, monitors, and terminates all other concurrent processes through
    requests made to the Service Manager, including restarting any failed processes.
    The ICM also starts and stops, and restarts the Service Manager for each node.
    The ICM will perform process migration during an instance or node failure.
    The ICM will be
    active on a single node. This is also true in a PCP environment, where the ICM
    will be active on at least one node at all times.
    Service Manager (FNDSM process) - Communicates with the Internal Concurrent
    Manager, Concurrent Manager, and non-Manager Service processes.
    The Service Manager (SM) spawns, and terminates manager and service processes (
    these could be Forms, or Apache Listeners, Metrics or Reports Server, and any
    other process controlled through Generic Service Management). When the ICM
    terminates the SM that
    resides on the same node with the ICM will also terminate. The SM is ？hained?
    to the ICM. The SM will only reinitialize after termination when there is a
    function it needs to perform (start, or stop a process), so there may be
    periods of time when the SM is not active, and this would be normal. All
    processes initialized by the SM
    inherit the same environment as the SM. The SM environment is set by APPSORA.
    env file, and the gsmstart.sh script. The TWO_TASK used by the SM to connect
    to a RAC instance must match the instance_name from GV$INSTANCE. The apps_<sid>
    listener must be active on each CP node to support the SM connection to the
    local instance. There
    should be a Service Manager active on each node where a Concurrent or non-
    Manager service process will reside.
    Internal Monitor (FNDIMON process) - Communicates with the Internal Concurrent
    Manager.
    The Internal Monitor (IM) monitors the Internal Concurrent Manager, and
    restarts any failed ICM on the local node. During a node failure in a PCP
    environment the IM will restart the ICM on a surviving node (multiple ICM's may
    be started on multiple nodes, but only the first ICM started will eventually
    remain active, all others will gracefully terminate). There should be an
    Internal Monitor defined on each node
    where the ICM may migrate.
    Standard Manager (FNDLIBR process) - Communicates with the Service Manager and
    any client application process.
    The Standard Manager is a worker process, that initiates, and executes client
    requests on behalf of Applications batch, and OLTP clients.
    Transaction Manager - Communicates with the Service Manager, and any user
    process initiated on behalf of a Forms, or Standard Manager request. See Note:
    240818.1 regarding Transaction Manager communication and setup requirements for
    RAC.
    Concurrent Manager Setup and Configuration Requirements in an 11i RAC
    Environment
    PCP를 사용하기위한 기본적인 Setup 절차를 설명하고 있습니다.
    In order to set up Setup Parallel Concurrent Processing Using AutoConfig with
    GSM,
    follow the instructions in the 11.5.8 Oracle Applications System Administrators
    Guide
    under Implementing Parallel Concurrent Processing using the following steps:
    1. Applications 11.5.8 and higher is configured to use GSM. Verify the
    configuration on each node (see WebIV Note:165041.1).
    2. On each cluster node edit the Applications Context file (<SID>.xml), that
    resides in APPL_TOP/admin, to set the variable <APPLDCP oa_var="s_appldcp">
    ON </APPLDCP>. It is normally set to OFF. This change should be performed
    using the Context Editor.
    3. Prior to regenerating the configuration, copy the existing tnsnames.ora,
    listener.ora and sqlnet.ora files, where they exist, under the 8.0.6 and iAS
    ORACLE_HOME locations on the each node to preserve the files (i.e./<some_
    directory>/<SID>ora/$ORACLE_HOME/network/admin/<SID>/tnsnames.ora). If any of
    the Applications startup scripts that reside in COMMON_TOP/admin/scripts/<SID>
    have been modified also copy these to preserve the files.
    4. Regenerate the configuration by running adautocfg.sh on each cluster node as
    outlined in Note:165195.1.
    5. After regenerating the configuration merge any changes back into the
    tnsnames.ora, listener.ora and sqlnet.ora files in the network directories,
    and the startup scripts in the COMMON_TOP/admin/scripts/<SID> directory.
    Each nodes tnsnames.ora file must contain the aliases that exist on all
    other nodes in the cluster. When merging tnsnames.ora files ensure that each
    node contains all other nodes tnsnames.ora entries. This includes tns
    entries for any Applications tier nodes where a concurrent request could be
    initiated, or request output to be viewed.
    6. In the tnsnames.ora file of each Concurrent Processing node ensure that
    there is an alias that matches the instance name from GV$INSTANCE of each
    Oracle instance on each RAC node in the cluster. This is required in order
    for the SM to establish connectivity to the local node during startup. The
    entry for the local node will be the entry that is used for the TWO_TASK in
    APPSORA.env (also in the APPS<SID>_<HOSTNAME>.env file referenced in the
    Applications Listener [APPS_<SID>] listener.ora file entry "envs='MYAPPSORA=<
    some directory>/APPS<SID>_<HOSTNAME>.env)
    on each node in the cluster (this is modified in step 12).
    7. Verify that the FNDSM_<SID> entry has been added to the listener.ora file
    under the 8.0.6 ORACLE_HOME/network/admin/<SID> directory. See WebiV Note:
    165041.1 for instructions regarding configuring this entry. NOTE: With the
    implementation of GSM the 8.0.6 Applications, and 9.2.0 Database listeners
    must be active on all PCP nodes in the cluster during normal operations.
    8. AutoConfig will update the database profiles and reset them for the node
    from which it was last run. If necessary reset the database profiles back to
    their original settings.
    9. Ensure that the Applications Listener is active on each node in the cluster
    where Concurrent, or Service processes will execute. On each node start the
    database and Forms Server processes as required by the configuration that
    has been implemented.
    10. Navigate to Install > Nodes and ensure that each node is registered. Use
    the node name as it appears when executing a nodename?from the Unix prompt on
    the server. GSM will add the appropriate services for each node at startup.
    11. Navigate to Concurrent > Manager > Define, and set up the primary and
    secondary node names for all the concurrent managers according to the
    desired configuration for each node workload. The Internal Concurrent
    Manager should be defined on the primary PCP node only. When defining the
    Internal Monitor for the secondary (target) node(s), make the primary node (
    local node) assignment, and assign a secondary node designation to the
    Internal Monitor, also assign a standard work shift with one process.
    12. Prior to starting the Manager processes it is necessary to edit the APPSORA.
    env file on each node in order to specify a TWO_TASK entry that contains
    the INSTANCE_NAME parameter for the local nodes Oracle instance, in order
    to bind each Manager to the local instance. This should be done regardless
    of whether Listener load balancing is configured, as it will ensure the
    configuration conforms to the required standards of having the TWO_TASK set
    to the instance name of each node as specified in GV$INSTANCE. Start the
    Concurrent Processes on their primary node(s). This is the environment
    that the Service Manager passes on to each process that it initializes on
    behalf of the Internal Concurrent Manager. Also make the same update to
    the file referenced by the Applications Listener APPS_<SID> in the
    listener.ora entry "envs='MYAPPSORA= <some directory>/APPS<SID>_<HOSTNAME>.
    env" on each node.
    13. Navigate to Concurrent > Manager > Administer and verify that the Service
    Manager and Internal Monitor are activated on the secondary node, and any
    other addititional nodes in the cluster. The Internal Monitor should not be
    active on the primary cluster node.
    14. Stop and restart the Concurrent Manager processes on their primary node(s),
    and verify that the managers are starting on their appropriate nodes. On
    the target (secondary) node in addition to any defined managers you will
    see an FNDSM process (the Service Manager), along with the FNDIMON process (
    Internal Monitor).
    Reference Documents
    Note 241370.1

    What is your database version? OS?
    We are using VCP suite for Planning Purpose. We are using VCP environment (12.1.3) in Decentralized structure connecting to 3 differect source environment ( consisting 11i and R12). As per the Oracle Note {RAC Configuration Setup For Running MRP Planning, APS Planning, and Data Collection Processes [ID 279156]} we have implemented RAC in our test environment to get better performance.
    But after doing all the setups and concurrent programs assignment to different nodes, we are seeing huge performance issue. The Complete Collection which takes generally on an avg 180 mins in Production, is taking more than 6 hours to complete in RAC.
    So I would like to get suggestion from this forum, if anyone has implemented RAC in pure VCP (decentralized) environment ? Will there be any improvement if we make our VCP Instance in RAC ?Do you PCP enabled? Can you reproduce the issue when you stop the CM?
    Have you reviewed these docs?
    Value Chain Planning - VCP - Implementation Notes & White Papers [ID 280052.1]
    Concurrent Processing - How To Ensure Load Balancing Of Concurrent Manager Processes In PCP-RAC Configuration [ID 762024.1]
    How to Setup and Run Data Collections [ID 145419.1]
    12.x - Latest Patches and Installation Requirements for Value Chain Planning (aka APS Advanced Planning & Scheduling) [ID 746824.1]
    APSCHECK.sql Provides Information Needed for Diagnosing VCP and GOP Applications Issues [ID 246150.1]
    Thanks,
    Hussein

  • Order Management / Advanced Pricing -API's

    Hello There:
    I need to know the Order Management / Advanced Pricing -API's.
    Thanks in advance,
    Zeeshan

    You are posting in the wrong forum
    But I am going to assume you are running 11i.
    This is the document for the Order Mgt APIs:
    http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115omapi.zip
    This is the Oracle Advanced Pricing Implementation Manual :
    http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115qpig.pdf
    Good luck

  • What is everyone using for managing iPads and iPhones for an Active Directory network. We also have a BES server

    I am seeking a solution to manage iphones and ipads for my enterprise. A few are currently being used. I will need to go back and shut them down to gather the appropriate information necessary to manage them going forward. Looking for manageability, security remote wipe logging. Pretty much what I can do with a Blackberry on a bes seerver. I see several products available. Can someone point me to one that they are happy with?

    The Identity Service for Active Directory 10.3.0 is only available on Windows because it uses .Net functionality to work with AD. Even if you run everything else on Linux, you would still need a Windows server for the AD Identity Service.
    You can download it from edelivery.oracle.com as part number V14368-01. You can also find it on that site by performing a media pack search for:
    Select a Product Pack: Oracle Fusion Middleware
    Platform: Microsoft Windows (32-bit)
    Then navigate down into "Oracle® Application Server 10g Release 3 (10.1.3) Media Pack v31 for Microsoft Windows".
    The package is "Oracle WebCenter Interaction Identity Service for Active Directory 10.3.0 for Microsoft Windows".

  • HT3951 helo   when i want to dollar from the online manager football and need for speed the game , i try to buy but i cannot because they told ( your purchase could not be completed contact itunes store support to complete this transaction.)  pleasr help

    helo
    when i want to dollar from the online manager football and need for speed the game , i try to buy but i cannot because they told ( your purchase could not be completed contact itunes store support to complete this transaction.)
    pleasr help me for that , i can not buy any thing inside the game .
    i wating , thank you
    Email : [email protected]

    Click here and request assistance.
    (75245)

  • Setup and configuration for system monitoring and IT Reporting for Java sys

    Hi all,
    How to setup and configuration for system monitoring and IT Reporting for Java system ?
    How to connect Java system to Solman system?
    Regards,
    Neni

    HI,
    What is your OS? You can use SAPCCMSR.exe to monitoring  IT Reporting Java system on Solman.
    Go to solman rz21 create a csmreg user. and configuration fil for agent. copy configuration fil on usr/sap/ccms/..
    Go to comman line cd ../user/sap/xxx/sys/exe/.../ wite SAPCCMSR.00 -R pf=< ...../sys/profile/instans profile> .
    You can se agent on rz10 and use this connaction on rz20 to monitoring and IT Reporting Java system on Solman.
    I hope this help

  • Need API Name for PIck Release and Ship Confirm for WMS Module

    Hi All,
    One if my requirement is that Initially I will create Internal Sales Order and send to the other system (legacy) there they do the shipping then they provide the flat file which contains shipping information. Based on the incoming file I will close the order. Here they are using the WMS to process the pick release and ship confirm.
    Can any one please help me how to do pick release and ship confirm by using an API or Interface in WMS. If knows please provide the name of the API's and flow.
    Thanks,
    Prasanna

    For external orders we have a solution on WMS_DEVICE_CONFIRMATION_PUB api.
    may be you have done pick release using this api in WMS enabled organizations. After pick release
    you can use WSH api to do Ship Confirm.
    Anatoly.

  • Setup and Configuration for a Solution Manager instance

    I am setting up a  Solution Manager instance for a client in Australia.
    Currently there is no reference client that I am aware of in Australia for Solution Manager.  So this is extremely important to get it right.  Also I am an independent contractor, so I am unable to call on any in-house experts from a consulting firm for help.
    So I am looking for answers from some experts who have done this before.
    Had some training on Solution Manager back in 2002.
    Our client wants to setup the solution manager instance to monitor 9 SAP instances
    - 3 R/3, DEV, Q/A, PROD
    - 3 BI, DEV, Q/A, PROD
    - 3 Enterprise Portal, DEV, Q/A, PROD
    Solution Manager is running in a separate instance for all those listed above.
    In addition to the above the client would also like to user the service desk function of Solution Manager for in-house support of SAP, and push to service desk request onto their support partner and/or SAP directly.
    Question:
    1) Is it better to use the Solution Manager client 001 or create a separate client for the customer?
    2) How would you as the expert configure the service desk component to push service desk requests to the support partner (a 3rd party Service Desk Tool or another Solution Manager instance), and allow the customer to choose to send the request direct to SAP?
    3) The client would also like to use the Solution Manager Instance as the CUA environment, is this advisable?
    Kind Regards
    David Cooper

    Hello David,
    Please find th answers below:
    1. You should use  a separate client for solution manager rather than using a standard one
    2. You should configure your solution manager as the service desk for all type of support requests.Solution manager can send your requests to SAP and vice-vera.Why do you a third part tool and waste money of the client.Solution manager can do all for you very effectively
    3.sure you should configure solution manager as CUA environment,there are no issues with that
    Let me know of any questions
    Rohit

  • Any questions on Order Management Header and Item level?

    Hi,
    If you are interviewing somebody...And the position he wants is SD consultant.
    What kind of questions will you raise on OM header level and item level??
    Order management--Questions on Header level
                                  Questions on item level
    Thanks, would be better if you could also attach the answer.
    Thanks!!

    Dear Hoo,
    ORDER MANAGEMENT & SALES
    1.Briefly describe the types and structure of the sales document and give examples of data
    that you find on the different levels.
    Sales*related business transactions are recorded in the system as sales documents. There are, broadly
    speaking, four different groupings of sales documents:
    Sales queries, such as inquiries and quotations
    Sales orders
    Outline agreements, such as contracts and scheduling agreements
    Customer problems and complaints, such as free of charge deliveries and credit memo requests.
    Header Data
    The general data that is valid for the entire document is recorded in the document header. This data
    includes the:
    number of the sold*to party
    number of the ship*to party and the payer
    document currency and exchange rate
    pricing elements for the entire document
    delivery date and shipping point
    Item Data
    Whereas data in the document header applies to all items in the document, some data applies only to
    specific items. This data is stored at item level and includes the:
    material number
    target quantity for outline agreements
    number of the shipto party and the payer (an alternative shipto party or payer can be defined for a
    particular item)
    plant and storage location specifications
    pricing elements for the individual items
    Schedule Line Data
    An item consists of one or more schedule lines. The schedule line contains all the data that is needed
    for a delivery. For example, a customer orders 20 pieces of a material and you enter this as an item in
    the sales order. However, you can only deliver 10 pieces now and the remaining 10 pieces next month.
    In other words, you need to schedule two deliveries. The data for these deliveries (dates, confirmed
    quantities) are stored in two separate schedule lines. In sales documents where delivery data is not
    relevant *for example: contracts, credit and debit memo requests * the system does not create any
    schedule lines.
    Data recorded in the schedule lines includes the:
    schedule line quantity
    delivery date
    confirmed quantity
    2.What is the difference between an inquiry and quotation ?
    . Inquiry: Request made to a vendor for a quotation for required materials or services.
    No availability check is done for inquiry.
    . Quotation: Offer from a vendor to a purchasing organization regarding the supply of materials
    or performance of services subject to predefined terms and conditions.
    A quotation consists of a number of items, in which the total quantity and delivery date of an
    offered material or service are specified.
    The total quantity can be subdivided into several partial quantities with different delivery dates in the
    lines of a delivery schedule.
    3.Do you always have to have a material master record number when you enter an item on a
    sales document (inquiry and quote)? If not what would you have to use to be able to enter
    information at item level?
    No. Customer Material Information or Material Description.
    4.If a customer doesn't place an order with you after you have sent him a quotation, what happens to
    the quotation document?
    Remains active till the end of validity period.
    5.Can you have alternative items in a sales order?
    Yes.
    6.If you reference an inquiry when creating a quotation ,would the inquiry be updated?
    Yes.
    7.Can you copy one inquiry to many quotations ?
    No.
    8.Can you copy several previous documents into one sales order?
    Yes.
    9.Do you always have to copy the entire quantities at item level when you reference a
    previous document?
    No.
    10.Can you make sure that business data in a sales order is only possible to maintain at header
    level?
    Yes.
    11.From where is the delivering plant transferred into the sales order?
    Customer Master, Material Master.
    12.Which partner function is relevant for the delivering plant? The soldtoparty ,
    billtoparty, payer, carrier or the ship* to* party?
    Ship*to party.
    13.Can you manually change the delivering plant in the sales order once it was defaulted from
    the master data?
    Yes.
    14.For what or why do you use the incompletion log?
    To have a complete document so that it doesnu2019t affect subsequent processes.
    15.Can you have different incompletion logs for different item categories? Schedule line
    categories?
    Yes.
    16.If a document is incomplete can you still save the document?
    Yes.
    17.Which reference status can a document have at item level? Which statuses at header level?
    Item level: Partial, Full.
    Header level: Full.
    18.What's the advantage of using text as a reference instead of duplicating it?
    Can be modified if needed.
    19.What three sources provide data for the creation of a sales document?
    Material Master, Customer Master, Previous referenced documents.
    20.Can you change addresses of partners manually in the sales document?
    Yes.
    21.Name several input tools that make order entry faster and give a definition of them?
    Customer Material Information, Product Proposal , Referencing Documents.
    22.In which business environment would you use only the single*line entry screen to create
    and save the order?
    Telephone Sales, Simple Business.
    23.If you do not specify the delivering plant in the sales order, what could the system then not
    do?
    Delivery Scheduling.
    24.For what would you use the fast change function in sales entry?
    Alternate Plants, Delivery or Billing Blocks
    25.Name two ways to control that customers can receive only certain materials?
    Material Listing, Exclusion.
    26.What does the item category control?
    General Data
    . Should pricing be carried out for the item?
    . When should an item be regarded as completed? A quotation item, for example, can only be
    regarded as completed if the entire quantity has been copied into a sales order.
    . Is it an item that refers to a material or is it a text item?
    . Are schedule lines allowed for the item?
    . May general business data, for example, the terms of payment at the item level, deviate from
    those at the header level?
    . Should a system message appear if the item cannot be fully delivered?
    . Which fields are relevant for the incompletion log?
    . Which partner functions are allowed at the item level and which are mandatory?
    . Which output (for example, an order confirmation) is allowed for the business transaction and
    which output determination procedure is used?
    Shipping Data
    . Is an item relevant for delivery?
    . Should the weight and the volume of an item be determined?
    Billing Data
    . Is an item relevant for billing?
    . Should the cost of the item be determined?
    . Is it a statistical item? Pricing is carried out for statistical items. However, they are not added
    to the value of the order, that is, the customer is not charged for them.
    . Should a billing block be set automatically for an item? For example, this may be important for
    items whose prices have to be clarified before billing
    . Is it a returns item?
    . Name the influencing factors for determining the item category in the sales document?
    . Sales Document type, Item Category Group, Higher Level Item, Item Usage.
    . Name the influencing factors for determining the scehdule line category in the sales document?
    . Item Category, MRP Type.
    . What does the sales document type control?
    General Data
    . Can the document be entered only with reference to a preceding document?
    . Should the existing customer
    . material info record be taken into consideration?
    . Should the delivery date be proposed?
    . Must a customer number be entered when creating a document? For example, product
    proposals can be entered without reference to a particular customer.
    . Which order probability is defined?
    . Should the division be taken from the material master record for every item or should an
    alternative division specified in the header take precedence over the item specifications?
    . How should the system respond if the division entered in the header deviates from the division
    in the items?
    . Should a credit limit check be made?
    . From which number range should the document number for internal or external number
    assignment come?
    . Which fields are relevant for the incompletion log? The validity period, for example, is
    important for contracts and must therefore be specified in the document.
    . Can an incomplete document be saved or must all data be complete?
    . Which partner functions are allowed and which ones are mandatory?
    Shipping Data
    . Which delivery type should the delivery resulting from the order have?
    . Should delivery scheduling be carried out?
    . Should transportation scheduling be carried out?
    . Should a delivery block be set automatically for a specific reason? For example, a delivery
    block may be appropriate for a freeofcharge delivery.
    . You can define shipping conditions for a sales document type. These are copied into the
    document regardless of what is defined in the customer master record.
    Billing Data
    -->Which billing type should the invoice resulting from the order or the delivery have?
    Should a billing block be set automatically for a specific reason? For example, a billing block may be
    appropriate if a credit memo request should first be checked before it is used as the basis for a credit
    memo.
    -->Can the sales document type be determined by the system?
    No.
    -->In R/3, can you automatically substitute one product for another? How? What would you
    have to create?
    Yes. Product Selection / Material Determination.
    -->Give a definition of replenishment lead time?
    Total time for the inhouse production or for the external procurement of a product. In inhouse
    production the replenishment lead time is determined to cover all BOM levels.
    What's the difference between checking availability with or without replenishment lead time (RLT)?
    With RLT : Availability check is done only upto end of RLT. If material is not available the date on
    which RLT ends is displayed as Material Availability Date.
    Without RLT : Availability check is unrestricted. Displays Delivery Dates as on which partial deliveries
    can be made with available stock.
    -->Name at least three item categories?
    Standard Items : AFN, AGN, TAN.
    Free of charge Items: AFNN, AGNN, TANN.
    Non*stock Items : AFX, AGX, TAX.
    Text Items : AFTX, AGTX, TATX.
    -->Why would you use different item and schedule line categories?
    Item categories are defined to provide additional control functions for the sales documents and thus
    meet the demands resulting from the different business transactions.
    The items in a sales document are divided into one or more schedule lines. These schedule lines differ
    from each other with respect to date and quantity. For some schedule lines, material requirements
    planning is not carried out; for other schedule lines, it is carried out. Also goods receipt, not goods
    issue, is posted for a schedule line defined in a returns document.
    -->Can you change existing standard item categories?
    Yes.
    -->Can you create new sales order types?
    Yes.
    -->Different dates will be calculated in order entry scheduling . Can you name the lead time
    variables that will be taken into account?
    Transportation lead time, Pick/pack time, Loading time, Transit time .
    If you run out of stock in a specific plant can you check if there are quantities available in other plants?
    Yes.
    -->When you carry out availability check, which quantities or movements can the system take
    into consideration?
    The following elements can be included in the availability check:
    Stocks : safety stock, stock in transfer, stock in quality inspection, blocked stock.
    Inward and outward movements : purchase orders, purchase requisitions, planned orders, production
    orders, reservations, dependent reservations, dependent requirements, sales requirements, delivery
    requirements.
    -->Give some examples of sales document types (description, not necessary the short code)
    that already set up in the standard system?
    Indicator used to control the processing of the various sales documents which are defined in the
    system. E.g., OR, SO, BV, KR. Document types allow the system to process different kinds of business
    transactions, such as standard orders and credit memo requests, in different ways.
    -->Can you maintain texts for a specific customer and store them in the system? If yes, where?
    Yes. Customer Material Information.
    -->When the system checks availability which scheduling would it use first?
    Backward Scheduling.
    -->Name the influencing factors for the determination of the availability date?
    The following data is required for determining this date:
    Route from the shipping point to the ship*to party location
    Shipping point from which the goods are issued
    Loading group from the material master record
    Weight group determined from the order using the order quantity.
    -->Name the three delivery possibilities when there is not enough stock available?
    One Time Delivery, Complete Delivery, Partial Deliveries.
    -->Can you think of an example why you would have to create a text for a customer and copy it
    to the sales order?
    Customer specific instructions.
    -->What is the function of item category group?
    The item category group determines how a material is processed in the sales order. It defines, for
    example, that pricing does not take place for a free of charge item, such as a business gift; or that
    inventory management is not carried out for a service. When processing sales and distribution
    documents, the system uses the item category group to determine the item category. The system
    determines the item category based on the item category group of the material and the current
    business transaction, and proposes it in the respective document.
    When creating the material types non*stock material and services, DIEN is proposed in both cases for
    the item category group, because the order processing for both material types is identical: for
    example, pricing is carried out for both, but no availability check.
    -->On sales order, when the system confirms 20 pieces to be available at a certain date, would
    these 20 pieces still be available for other new sales order coming in later?
    No.
    -->What is a delivery group and why would you use it?
    The complete delivery and delivery group functions enable you to combine some or all of the items in a
    sales order so that they are delivered to the customer together. The system determines automatically
    the latest delivery date possible for the delivery group and adjusts the schedule lines accordingly.
    Corresponding requirements for material requirements planning (MRP) are changed or re*determined.
    -->What is backorder processing?
    The backorder processing functions enable you to list relevant sales documents for specific materials
    and process them from the point of view of availability. You can assign available to promise (ATP)
    stock to outstanding order quantities. In addition, you can withdraw already confirmed quantities and
    reassign them to different items.
    Backorder processing is only available for materials with individual requirements.
    -->Can you link items in a sales order? If yes, when would you do that?
    Yes. Promotional Items.
    -->For what would you use BOMu2019S in sales? What two methods of BOM processing do you have
    in sales order entry? How can you control if the system should/should not explode a BOM in
    the sales order.
    A bill of material (BOM) describes the different components that together create a product. A BOM for
    a bicycle, for example, consists of all the parts that make up the bicycle: the frame, the saddle,
    wheels, and so on. When you enter the material number of a bill of materials that is relevant for sales
    order processing, the system displays the material that describes the whole bill of materials as a main
    item. The components are displayed as sub*items.
    Processing by Main Item : ERLA & Processing by Sub*Item : LUMF
    BOM explosion can be prevented by specifying Item Category Group as NORM.
    Credit limit checks is an example of a very close link between which two SAP modules?
    SD & FI.
    -->What are the two techniques in delivery scheduling?
    Backward Scheduling & Forward Scheduling.
    -->How does a third party deal work? Do you use a special sales order type for that? How could
    the system know that you want to process a third party deal?
    By specifying item category as TAS using double*line entry in the sales order.
    No special order type is available.
    By the item category group and/or material type in Material Master .
    Name the several steps in consignment processing.
    Consignment fillup, Consignment issue, Consignment pickup, Consignment return.
    Whatu2019s the difference between consignment pick*up and consignment return?
    In consignment pick*up, customer returns consignment stock. When goods issue is posted, the
    relevant quantity is deducted from the customer's special stock and is added back to regular stock at
    the plant where the goods are returned. Total valuated stock remains the same since the returned
    stock was regarded as part of inventory even while it was at the customer's premises.This transaction
    is not relevant for billing.
    In consignment return, customer wishes to claim on consignment goods which have already been
    issued. When goods issue is posted, the relevant quantity is added to the customer's special stock at
    the plant where the goods are returned. Since the ownership of the goods is passed from the customer
    back to the company, the transaction is relevant for billing. In this case, the customer receives a credit
    memo for the returned goods.
    -->Can you control that an end user cannot copy a quote of customer A to a sales order for
    customer B? If yes, where?
    Yes. By customizing Copying Control for header data.
    Give some example for data that is copied from the customer (soldto, payer, shipto) to the sales
    order as well as for data that is copied from the material?
    General data, payment terms, shipping details, delivery agreements, delivering plant.
    -->What is returnable packaging processing?
    Returnable packaging consists of materials that are stored at the customer location but which remain
    the property of the company. The customer is only required to pay for the returnable packaging if he
    does not return it by a specified time.
    Name the two outline agreements in R/3 standard and explain the difference between them.
    Agreements are arrangements between business partners regarding the granting of conditions over a
    specified time period. The agreement contains conditions which apply over a particular time period and
    which are settled together at the same points in time. An agreement can be settled once or
    periodically. The two outline agreements include Contracts and Scheduling Agreements.
    Unlike a contract * which only contains an overall target quantity or value * a scheduling agreement
    also contains specific order quantities and delivery dates.
    -->How many documents do you create when you release, deliver and invoice the first order
    from a contract?
    Three : Sales order, Delivery note, Invoice.
    -->What types of output can you have in sales?
    Printer, Telex, Fax, Mail, EDI.
    -->Can you automate output processing ? Do you always have to specify it manually?
    yes. No.
    -->Where would you specify which data should be copied (at header, item and schedule line
    level)when you copy from one document to another one?
    Customizing Copy Control.
    I hope it will help you,
    Regards,
    Murali.

  • Do we need both management Pack and ADP  for monitoring SOA suite 11g

    Hi,
    Do we need to Both management pack and ADP (OCAMM) Application Dependancy and Performance for monitoring SOA Suite 11g.
    I was creating a monitoring template for SOA Composite and SOA Infrastructure and wanted to know if I need to install additional ( management packs, ADP and Middleware Plugins ) packs to get an effective template.

    A management pack generally refers to the set of pages in EM Grid/Cloud Control which provide functionality for a given set of target types. Since EM Grid Control 11g, the ADP functionality has been part of the Grid Control release and the pages licensed via the Management Pack Plus for SOA or the SOA Management Pack EE.
    To populate the ADP pages with data, additional steps must be performed in order to deploy an ADP manager and ADP agents. Doing this is optional, depending on whether or not you require the additional capability that those pages provide.
    ADP data, however, are collected and stored separately from the core GC/CC metrics and are not related to the monitoring template functionality.

  • API to pick release a sales order

    Hi All,
    I have a requirement of picke releasing a sales Order from back-end.
    I have the order in the booked status, In my pick release program I am calling the program to generated the batch id by calling the package WSH_PICKING_BATCHES_PKG.Insert_Row(), and then release the batch by calling
    WSH_PICK_LIST.release_batch(), but the order is not pick release.
    I found out that WSH_PICKING_BATCHES_PKG.Insert_Row(), generates a batch id but it is not inserting data into the table WSH_PICKING_BATCHES, I dont know why. Can anyone help in this regard as to where the problem might or what other API's if they exist can be used to pick release the order.
    Any method of pick releasing suggested will be highly appreciated.
    I am in 11.5.9 and we dont have the patch 3438823 applied in our system.
    Thanks
    Ashwini

    we are using these 2 APIs, it works.
    apps.wsh_picking_batches_pub.create_batch
    and
    apps.wsh_picking_batches_pub.release_Batch

  • APIs In WMS For Pick Release

    Hi All,
    Request your help in WMS APIs..
    Our Requirement is that we need to Pick, Pack, Load, Drop Off the goods in WMS enabled Warehouse. And we need to Use API for achieving the task, Can any one help me with API details that has to be used for achieving this. And this will be LPN Enabled transactions.
    Mrunal K

    Hii..
    Can any one reply..
    We need to perform the following tasks in WMS.
    1. Create LPN
    2. Pack
    3. Load
    4. Drop
    Can any one help me with this. If there is no proper APIs then is there any workaround for achieving this ??
    Mrunal K

  • ISA order.jsp; message and validation for "Your reference" field

    Hi Everyone,
    I am new to ISA and working on java program to add message to "Your Reference" field in order.jsp page if this field is empty and clicked on "Check Out" button and user need to remain in the same page until user enters information in this field.
    Message is available in .xlf file.
    Please suggest me where to write this code for both message and validation for this field.
    Thanks in advance
    Prasad

    I fixed the requirement
    thanks
    Prasad

  • Order Management - 'Export' and 'Non-export' orders.

    Hi,
    Could anyone help me how to distinguish between an 'export' type sales order and a 'non-export' type sales order?
    I need the details of the columns that we should be looking into to identify the above types of sales orders.
    Thanks and Regards,
    Mantha

    The reason the stock is released to warehouse is because requested quantity is set to zero so the seeded process fails on reservation so the cycle exits in limbo.
    The solution is to rather leave the requested quantity and set the stock Available to Request (ATR) to zero.
    Tracing through the packages yields...
    WSH_PICK_LIST.RELEASE_BATCH
    |--> INV_PICK_RELEASE_PUB.PICK_RELEASE
    |--> INV_PICK_RELEASE_PVT.PROCESS_LINE
    |--> ..PROCESS_RESERVATIONS
    ... which is where the ATR is set via INV_QUANTITY_TREE_PUB and can thus be "hacked".
    A functional solution is to perhaps have two logical warehouses. One for any packing unit and one for cartonised packing units. But then again not all business' can see there way clear with vanilla functionality ;)
    G

Maybe you are looking for