RAC upgrade from11gR1 to 11gR2

Could someone please give steps to upgrade 11gr1 to 11gr2 on linux

Did you try even a basic search before posting this request? In future, suggests doing that before turning to forums.
This being your first post, go to oracle 11gR2 home page and search for "How to Upgrade to Oracle Grid Infrastructure 11g Release 2" and pick the one for your OS
Cheers.

Similar Messages

10g RAC upgrade to 11g RAC

How to perform 10g RAC upgrade to 11g with Dataguard in place?
OS=LINUX
RDBMS=10.2.0.4
DG=PHYSICAL STANDBY
Below is my understanding
1)Install 11g CRS in NEW_CRS_HOME
2)Install 11g in NEW_ASM_HOME
3)Install 11g in NEW_RDBMS_HOME
4)Export the new NEW_ORACLE_HOME and start up the database with startup upgrade.
5) Run the catupgrade.sql script.
Are there any other steps involve?
In case I have to rollback then how to rollback CRS.

Personally I would use DBUA instead of catupgrade.sql, but make sure you follow the upgrade documentation for pre-checks etc. You will also need to use netca to recreate the sqlnet listeners in the 11g homes and register with 11g CRS.
CRS is generally fairly quick to re-install and re-register databases, and this is cleaner than trying to restore OCR and VOTE disks etc. If you prefer to rollback be sure you backup the OCR and VOTE disks (e.g use dd), backup /etc/oracle, CRS_HOME, /etc/init* scripts etc.
The dataguard standby database should roll forward through the upgrade, but you will need to manually register the standby with 11gCRS. Make sure you have your DB and Log create_file_dest's set, as well as standby_file_management=auto. Personally I would manually recover the standby after the upgrade in case I need to use it to fallback.
Edited by: rgeier on Sep 1, 2009 3:51 PM

Request help with upgrading 10gr2 to 11gr2(11.2.03) in EBS 11.5.10.2

EBS 11.5.10.2
Sue Linux 10 SP2
HRMS application
Database 10.2.0.4
I am planning on upgrading 10gr2 to 11gr2(11.2.03) in EBS 11.5.10.2.
I was going thru document 881505.1 under Veryfy software versions, it says autoconfig latest version with 9835302 patch.
In note 165195.1 using autoconfig to manage Configurations with oracle systems under patching autoconfig, says apply patch 9525311.
which one should be applying?
9835302 patch or 9525311?
Thanks.

I was going thru document 881505.1 under Veryfy software versions, it says autoconfig latest version with 9835302 patch.
In note 165195.1 using autoconfig to manage Configurations with oracle systems under patching autoconfig, says apply patch 9525311.
which one should be applying?
9835302 patch or 9525311?
The doc says "Also apply patch 9835302" in addition to AutoConfig patches, so you need to apply both -- (Patch 9835302 and Patch 9535311).
Thanks,
Hussein

2 node solaris RAC upgrade to 10.2.0.4

Gurus,
I am going to do my first rac upgrade of 2 node solaris from 10.2.0.1 to 10.2.0.4 . I have asm and db installed in 2 separate home. Please give me a brief outline . I wont mind being told to rtfm. :-)
Thanks in advance.
Pk

I am seeing this message in agent trace file
2008-05-09 14:48:07 Thread-63 ERROR engine: [oracle_database,RDBE_RDBE2,health_check] : nmeegd_GetMetricData failed : Instance Health Check initialization failed due to one of the following causes: the owner of the EM agent process is not same as the owner of the Oracle instance processes; the owner of the EM agent process is not part of the dba group; or the database version is not 10g (10.1.0.2) and above.
2008-05-09 14:48:07 Thread-63 WARN collector: <nmecmc.c> Error exit. Error message: Instance Health Check initialization failed due to one of the following causes: the owner of the EM agent process is not same as the owner of the Oracle instance processes; the owner of the EM agent process is not part of the dba group; or the database version is not 10g (10.1.0.2) and above.
2008-05-09 14:48:22 Thread-65 ERROR fetchlets.healthCheck: GIM-00105: file not found

RAC upgradation 9i to 11g R2

Hi,
I have been given the requirement to migrate a 9i RAC 3 node database( 9i cluster) to 11g R2 RAC database iam looking for a document or steps to do this activity. any help on this is highly appreciated.
should I upgrade the cluster first and then upgrade each node one by one or I should upgrade the cluster and upgrade all the home in one go ?
Thanks,
Satish Abraham.J

Hi,
Since you are using RAC database , you need to upgrade Clusterware (11.2.0.3) first , then RAC database upgrade(11.2.0.3).
For RAC Upgrade to 11.2.0.3 we have following options/upgrade_methods available:-
+1.Manual Upgrade (using catupgrd.sql script)+
You have to do this in two steps:-
9.2.0.3 ---->9.2.0.8 ----> 11.2.0.3
+2. Using DBUA (Database Upgrade Assistant)+
+3. Export / Import+
If you have MOS access, then you can refer following Note:-
*Different Upgrade Methods For Upgrading Your Database [ID 419550.1]*
Regards,

10gR2 single instance to 11gR2 rac upgrade

Can someone tell me some good approach for upgrading a single instance 10.2.0.2 database of approx size 2TB to 11.2.0.3 rac 2 node db on linux.

Hi;
1. You can upgrade your db to 11gr2 first than convert it to rac
2. You can use RMAN and restore it to new 11gR2 server
3. You can use expdp/impdp to new 11gR2 server
Please see:
Minimizing Downtime During Production Upgrade [ID 478308.1]
Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
Different Upgrade Methods For Upgrading Your Database [ID 419550.1]
Check:
How does one convert a single instance database to RAC?
http://www.orafaq.com/wiki/RAC_FAQ#How_does_one_convert_a_single_instance_database_to_RAC.3F
Please also check my blog
http://heliosguneserol.wordpress.com/2010/06/17/move-to-oracle-database-11g-release-2-wiht-mike-dietrich/
In this pdf you can see patch of to upgrade db from x to n wiht many senerios wiht all related metalinks notes which is created by Oracle worker Mike Dietrich
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios

11gr2 RAC Upgrade-Spfile from old home.

Hi Team,
We have sucessfully upgraded database from 11.2.0.1 to 11.2.02 in RAC , But one database is coming from OLD ORACLEHOME
the spfile location is show ing as old ORALCE home ,at ASM in +DATADG spfile is there but still when we use srvctl start database database name ..
its getting statted from old oracle home and only one instance is getting started..another instance is not coming up..!
oracle@HDB1:/oracle11R2/app/11.2.2/dbs $srvctl start database -d FCTS1
PRCR-1079 : Failed to start resource ora.fcts1fcr.db
CRS-5017: The resource action "ora.fcts1fcr.db start" encountered the following error:
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '/oracle/app/product/11.2.0/dbs/spfileFCTS1.ora'
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directory
Additional information: 3
CRS-2674: Start of 'ora.fcts1fcr.db' on 'hbfcstgdb2' failed
CRS-2632: There are no more servers to try to place resource 'ora.fcts1fcr.db' on that would satisfy its placement policy
oracle@HBFC:/oracle11R2/app/11.2.2/dbs $cd /oracle/app/product/11.2.0/dbs/
SQL> show parameter spfile
NAME TYPE VALUE
spfile string /oracle/app/product/11.2.0/dbs
/spfileFCTS1FCR.ora
SQL> show parameter database
NAME TYPE VALUE
cluster_database boolean TRUE
cluster_database_instances integer 2
Thanks
MAnohar.

Hi,
can you do an
srvctl config database -d <dbname>
and print the output here.
Regards
Sebastian

10.2.0.5 to 11.2.0.4 RAC upgrade w/11i

Dear All,
I wanted to inquire if someone can provide high level guidance for a 10GR2 to 11Gr2 upgrade while staying on 11.5.10.2. My two core Metalink docs are the first two below but wondering if there is an Interoperability Note specifically for for a 10g to 11g upgrade within 11i... just curious if I am missing a core doc, i haven't been able to find one specifically in metalink other than the ones below.
Thanks in advance!, Jeff
Doc ID: 881505.1: Interoperability Notes – Oracle E-Business Suite Release 11i w/Oracle Database 11g Release 2(11.2.0.4) Jun 2014
Doc ID: 823586.1: Using 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 11i
Doc ID: 1376369.1: IBM General Parallel File System (GPFS ) 3.2, 3.3, 3.4 and 3.5 and Oracle RAC
Doc ID: 756671.1: Oracle Recommended Patches – Oracle Database
Doc ID: 1072807.1: Oracle E-Business Suite Release 11i High Availability Documentation Roadmap
Doc ID: 1338669.1: Which documents are helpful for an update of a data guard configuration to 11gR2
Doc ID: 837570.1: Complete Checklist for manual upgrades to 11gR2
Doc ID: E482940-01: Oracle Grid Infrastructure Installation Guide 11gRelease 2 (11.2) for IBM AIX on Power Systems (64Bit)
Doc ID: E23633-11: Oracle Database Upgrade Guide 11g Release 2 (11.2)

My two core Metalink docs are the first two below but wondering if there is an Interoperability Note specifically for for a 10g to 11g upgrade within 11i
No other docs are available or needed here, as you mentioned the first two docs are the main ones, first one to upgrade/configure RAC to 11gR2 which refers to the interop docs for the database upgrade.
... just curious if I am missing a core doc, i haven't been able to find one specifically in metalink other than the ones below.
What other doc are you looking for? Do you see anything missing in the docs you already have?
Thanks,
Hussein

Owbsys.wb_rt_api_exec.open fails after upgrade to OWB 11gR2

The following code is used as a PLSQL wrapper to execute OWB mappings and is based on the good old run_my_own_stuff.sql. We have been mandated to use Tivoli as the corporate scheduler, meaning we do not have Workflow as a solution. We have implemented the audit_execution_id as an input parameter to all the mappings to be able to link the data to the OWBSYS audit tables, as well as return mapping performance and success info to the execution process/session. I have implemented this exact same procedure in 10gR1, 10gR2 and 11gR1 (current dev env) with no problems at all - the code ports easily. However following an upgrade (actually an export/import of the repository from 11gR1 on a 64bit solaris to 11gR2 on Exadata running enterprise linux 5) - actually the test server (I know, I know, I said the same thing!), the code now fails on the wb_rt_api_exec.open line (highlighted).
CREATE OR REPLACE PROCEDURE bi_ref_data.map (p_map_name IN VARCHAR2)
-- Procedure to execute ETL mapping package via command line call
-- Mapping names are held in the BI_REF_DATA.MAP_NAME table
-- with the mapping type and location data
AS
v_repos_owner VARCHAR2 (30) := <repository_owner>;
v_workspace_owner VARCHAR2 (30) := <workspace_owner>;
v_workspace_name VARCHAR2 (30) := <workspace_name>;
v_loc_name VARCHAR2 (30);
v_map_type VARCHAR2 (30);
v_map_name VARCHAR2 (30) := UPPER (p_map_name);
v_retval VARCHAR2 (255);
v_audit_execution_id NUMBER; -- Audit Execution Id
v_audit_result NUMBER;
v_start_time timestamp := LOCALTIMESTAMP;
v_end_time timestamp;
v_execution_time NUMBER;
v_record_rate NUMBER := 0;
v_records_selected NUMBER;
v_records_inserted NUMBER;
v_records_updated NUMBER;
v_records_deleted NUMBER;
v_records_merged NUMBER;
v_errors NUMBER;
v_failure VARCHAR2 (4000);
e_no_data_found_in_audit exception;
v_audit_exec_count NUMBER;
e_execution_id_error exception;
BEGIN
SELECT UPPER (loc_name), UPPER (map_type)
INTO v_loc_name, v_map_type
FROM bi_ref_data.owb_map_table
WHERE UPPER (map_name) = UPPER (v_map_name);
IF UPPER (v_map_type) = 'PLSQL'
THEN
v_map_type := 'PLSQL';
ELSIF UPPER (v_map_type) = 'SQL_LOADER'
THEN
v_map_type := 'SQLLoader';
ELSIF UPPER (v_map_type) = 'SAP'
THEN
v_map_type := 'SAP';
ELSIF UPPER (v_map_type) = 'DATA_AUDITOR'
THEN
v_map_type := 'DataAuditor';
ELSIF UPPER (v_map_type) = 'PROCESS'
THEN
v_map_type := 'ProcessFlow';
END IF;
-- Changed code for owb11gr2
-- owbsys.wb_workspace_management.set_workspace (v_workspace_name, v_workspace_owner);
owbsys.wb_rt_script_util.set_workspace (v_workspace_owner || '.' || v_workspace_name);
v_audit_execution_id := owbsys.wb_rt_api_exec.open (v_map_type, v_map_name, v_loc_name);
IF v_audit_execution_id IS NULL
OR v_audit_execution_id = 0
THEN
RAISE e_execution_id_error;
END IF;
v_retval := v_retval || 'audit_execution_id=' || TO_CHAR (v_audit_execution_id);
v_audit_result := owbsys.wb_rt_api_exec.execute (v_audit_execution_id);
IF v_audit_result = owbsys.wb_rt_api_exec.result_success
THEN
v_retval := v_retval || ' --> SUCCESS';
ELSIF v_audit_result = owbsys.wb_rt_api_exec.result_warning
THEN
v_retval := v_retval || ' --> WARNING';
ELSIF v_audit_result = owbsys.wb_rt_api_exec.result_failure
THEN
v_retval := v_retval || ' --> FAILURE';
ELSE
v_retval := v_retval || ' --> UNKNOWN';
END IF;
DBMS_OUTPUT.put_line (v_retval);
owbsys.wb_rt_api_exec.close (v_audit_execution_id);
v_end_time := LOCALTIMESTAMP;
v_execution_time := bi_ref_data.get_seconds_from_interval (v_end_time - v_start_time);
v_retval := 'Execution time = ' ||
v_execution_time ||
' seconds.';
DBMS_OUTPUT.put_line (v_retval);
SELECT COUNT (w.rta_select)
INTO v_audit_exec_count
FROM owbsys.owb$wb_rt_audit w
WHERE w.rte_id = v_audit_execution_id;
IF v_audit_exec_count = 0
THEN
RAISE e_no_data_found_in_audit;
END IF;
SELECT w.rta_select,
w.rta_insert,
w.rta_update,
w.rta_delete,
w.rta_merge,
rta_errors
INTO v_records_selected,
v_records_inserted,
v_records_updated,
v_records_deleted,
v_records_merged,
v_errors
FROM owbsys.owb$wb_rt_audit w
WHERE w.rte_id = v_audit_execution_id;
v_retval := v_records_selected || ' records selected';
DBMS_OUTPUT.put_line (v_retval);
IF v_records_inserted > 0
THEN
v_retval := v_records_inserted || ' inserted';
DBMS_OUTPUT.put_line (v_retval);
END IF;
IF v_records_updated > 0
THEN
v_retval := v_records_updated || ' updated';
DBMS_OUTPUT.put_line (v_retval);
END IF;
IF v_records_deleted > 0
THEN
v_retval := v_records_deleted || ' deleted';
DBMS_OUTPUT.put_line (v_retval);
END IF;
IF v_records_merged > 0
THEN
v_retval := v_records_merged || ' merged';
DBMS_OUTPUT.put_line (v_retval);
END IF;
IF v_errors > 0
THEN
v_retval := v_errors || ' errors';
DBMS_OUTPUT.put_line (v_retval);
END IF;
IF v_execution_time > 0
THEN
v_record_rate := TRUNC ( (v_records_inserted + v_records_updated + v_records_deleted + v_records_merged) / v_execution_time, 2);
v_retval := v_record_rate || ' records/sec';
DBMS_OUTPUT.put_line (v_retval);
END IF;
IF (v_audit_result = owbsys.wb_rt_api_exec.result_failure
OR v_audit_result = owbsys.wb_rt_api_exec.result_warning)
THEN
FOR cursor_error
IN (SELECT DISTINCT aml.plain_text
FROM owbsys.owb$wb_rt_audit_messages am
INNER JOIN
owbsys.owb$wb_rt_audit_message_lines aml
ON am.audit_message_id = aml.audit_message_id
WHERE am.audit_execution_id = v_audit_execution_id)
LOOP
DBMS_OUTPUT.put_line (cursor_error.plain_text);
END LOOP;
END IF;
-- OWBSYS.wb_rt_api_exec.close (v_audit_execution_id);
COMMIT;
EXCEPTION
WHEN e_execution_id_error
THEN
raise_application_error (-20011, 'Invalid execution ID returned from OWB');
-- RAISE;
WHEN e_no_data_found_in_audit
THEN
raise_application_error (-20010, 'No data found in audit table for execution_id - ' || v_audit_execution_id);
-- RAISE;
WHEN NO_DATA_FOUND
THEN
raise_application_error (-20001, 'Error in reading data from OWBSYS tables.');
-- RAISE;
END;
Does anyone out there know if there is a difference between 11gR1 and R2 in the way that the wb_rt_api_exec function works?
Is there a simple way to retrieve the audit_id before executing the mapping, or at a push during the mapping so that we can maintain the link between the session data and the OWBSYS audit data?
Martin

Hi David, I have been reading some of your posts and blogs around OWB and I still have not found the answer.
OK, thereis/was a script that Oracle Support/forums/OTN sent out a while ago called "run_my_iowb_stuff" - I am sure you will be familiar with it. I based the code I uploaded on it and added additional functionality. In essence, I wanted to use the audit_id as an input parameter tot he mapping, so that I can register the audit_id in the management tables, and associate each row of loaded data with a specific mapping_id which would allow a simple link to the owbsys audit tables to complete the audit circle. To that end, I used the owbsys.wb_rt_api_exec.open procedure to register the mapping execution, and then on the execute procedure of the same package, I passed this audit_id in as a custom parameter:
<<snip>>
owbsys.wb_workspace_management.set_workspace (v_workspace_name, v_workspace_owner);
v_audit_execution_id := owbsys.wb_rt_api_exec.open (v_map_type, v_map_name, v_loc_name, 'PLSQL');
IF v_audit_execution_id IS NULL
OR v_audit_execution_id = 0
THEN
RAISE e_execution_id_error;
END IF;
v_retval := v_retval || 'audit_execution_id=' || TO_CHAR (v_audit_execution_id);
IF v_include_mapping_id > 0 -- if non-zero, submit owb execution id as an input parameter to the map process
THEN
owbsys.wb_rt_api_exec.override_input_parameter (
v_audit_execution_id,
'p_execution_id',
TO_CHAR (v_audit_execution_id),
owbsys.wb_rt_api_exec.parameter_kind_custom
END IF;
<<snip>>
The execution is closed, also by the use of the audit_id ( "owbsys.wb_rt_api_exec.close (v_audit_execution_id)" )
I can also use the audit_id to inspect the audit tables to retrieve the records processed as well as any associated error messages, and format them for the calling application (owSQL*Plus, which is normally the context of our current use).
This procedure has been working weel up to now until we moved over to 11gR2 when all of a sudden the audit_id is not returned when executing "v_audit_execution_id := owbsys.wb_rt_api_exec.open (v_map_type, v_map_name, v_loc_name);". Prior to 11gR2 this worked like a charm - now it has crashed to a halt.
As an interesting twist, I have tried to substitute a sequence number for the audit_id, and then tried to get the audit_id after the mapping completes, so that I can put both the sequence and audit id in a table so it maintains the link. However in attempting to use the owbsys.wb_rt_script_util.run_task procedure which now appears to be the only thing left working, I was astonished to see the following output in sqlplus:
SQL> exec map1('stg_brand')
Stage 1: Decoding Parameters
| location_name=STAGE_MOD
| task_type=PLSQLMAP
| task_name=STG_BRAND
Stage 2: Opening Task
| l_audit_execution_id=2135
Stage 3: Overriding Parameters
Stage 4: Executing Task
| l_audit_result=1 (SUCCESS)
Stage 5: Closing Task
Stage 6: Processing Result
| exit=1
--> SUCCESS
Execution time = .647362 seconds.
records/sec
PL/SQL procedure successfully completed.
SQL>
This output seems so identical to the "run_my_owb_stuff" that either Oracle support generated their "run_my_owb_stuff" as a lightweight owbsys.wb_rt_script_util.run_task procedure, or Oracle incorporated the "run_my_owb_stuff" script into their owbsys.wb_rt_script_util.run_task procedure! Which way round I cannot say, but it is surely one or the other! To make matters worse, I have raised this with Oracle Support, and they have the temerity to claim that they do not support the "run_my_owb_stuff" script, but think enough of it to incorporate it into their own package in a production release!
To overcome my problems, in the short term, I need to be able to access the audit_id either during or after the execution of the mapping, so that I can at least associate that with a sequence number I am having to pass in as a parameter to each mapping. In the longer term, i would like a solution to be able to access the audit_id before I execute the mapping, as I could by calling the "owbsys.wb_rt_api_exec.open " procedure. Ideally this would be solved first and I would not need to use a sequence at all.
Hope this clarifies things a bit.
Regards
Martin

Oracle 10g RAC to 11g RAC Upgrade on Solaris

Hi,
We are planning to do a migration of a 4 Node Oracle 10g RAC on Solaris 9 to 11g with Solaris 10. We'd like know what would be the best path to take. We cannot afford any downtime!
Options: Are these feasible? Which option is best? Any documents links?
a) Do a rolling upgrade of Oracle from 10g to 11g. Then take down individual nodes and upgrade the Solaris OS from 9 to 10 and bring them up back into the cluster. Is there any known issues taking this path? Is a rolling upgrade like this possible?
b) Do an upgrade of the Solaris OS from 9 to 10 on each node and then bring them back up? Is this practical? Does Oracle allow different versions of OS running on different nodes?
c) Use Dataguard with 2 different RAC environments (2 nodes each). How would this work? Is it the only possible way? Any steps please?
Thanks

a) Do a rolling upgrade of Oracle from 10g to 11g. Then take down individual nodes and upgrade the Solaris OS from 9 to 10 and bring them up back into the cluster. Is there any known issues taking this path? Is a rolling upgrade like this possible?Hi,
first of all i would not change several components (OS, database version) at a time. My recommendation is to make small steps and start with the operating system first. Seconds recommendation is to test and test everything in your dev or test environment prior doing the upgrades in the productive environment. Trust me: You will face problems :-) So you better try it beforehand!
b) Do an upgrade of the Solaris OS from 9 to 10 on each node and then bring them back up? Is this practical? Does Oracle allow different versions of OS running on different nodes?As far i know you can run different operating system versions on different nodes if they are supported (Solaris 9 and 10 are).
Ronny Egner
My blog: http://ronnyegner.wordpress.com

10.2.0.3 Rac upgrade to 11.2

I have 10.2.0.3 Rac with 2 nodes, i want to upgrade to 11.2, Am not able to find the clusterware patch number to download.Can some one help me to get the patch number and steps for the complete upgrade(metalink note)
Os version: Solaris 10 (64bit Sparc)
Thanks
Baiju.R

Hi,
Welcome 2 Oracle Forums :)
I have 10.2.0.3 Rac with 2 nodes, i want to upgrade to 11.2, Am not able to find the clusterware patch number to download.Can some one help me to get the patch number and steps for the complete upgrade(metalink note)*11.2.0.2 patchset - 10098816*
thanks,
X A H E E R

Error upgrading repository to 11gR2

Have a 10.2.0.4 repository and trying to upgrade to 11gR2.
Ran the cat_owb.sql script, and unlocked the OWBSYS and OWBSYS_AUDIT acounts
Ran the reset_owbcc_home.sql script
Started the repository admin tool, selected "Upgrade Repository...", then "Export entire repository..."
Entered credentials for the 10.2.0.4 repository owner
Set the file information, and clicked Finish to start the export.
At 21% complete, a SQL Exception is thrown. The log file reports:
SQLException
Persistent Layer Error: SQL Exception..
Class Name: CMPPersist.
Method Name: queryObjNameInfo.
Persistent Layer Error Message: ORA-00904: "OWNINGPLATFORMTYPESET": invalid identifier
SELECT elementid, classname, name, ..., iconObject, OwningPlatformTypeSet from CMPDatatype_V where elementid=?.Any ideas would be appreciated.

Needed to apply patch 9201820

10g RAC upgrade

We are planning to install 10gR2 RAC on Sun solaris 10 with Veritas and Hiatchi SAN. After that, we would like to upgrade 9iRAC database to 10g RAC.
We tried once, the CRS install was okay.
But, we couldn't bring dbua up ( We made sure Xwindow setup is fine etc.. ).
Can somebody share the environment variables to, set before we start DBUA and also during CRS install.
Also, if you have a good document to upgrade 9iRAC to 10gRAC on Sun solaris with Veritas.
Thanks
-Ashok

Ashok,
You can also get all the details about upgrade in Oracle Upgrade Guide published on OTN. Please have a look at the following URL:
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14238/upgrade.htm#sthref107
Thanks & Regards
-Harish Kalra

Upgrading to Clusterware 11Gr2 question

I am need to upgrade to 11Gr2 clusterware from 11Gr1. One of the pre-reqs is to have a newer verision of ASMLIB.
I have not found any docs that referr to the upgrade ASMLIB. What my sysadmin is indicating is that if this is done
All of my current asm info will be lost since all of the disk lables are removed. I believe his method ws going to be
to remove old RPM and install new RPM. Does anyone know what the correct process is for upgrading the ASMLIB?
thanks
Igy

My ASMLIB is the version 10.2.0.4this is not a asmlib vesion; it's rmbms version.
rpm -qa oracleasmlib using this check your asm lib version
Babu

How to upgrade 11gR1 to 11gR2?

Hi DBA's.
I need upgrade my database 11gR1 to 11gR2 with ASM. My SO is UBUNTU.
What is the note in metalink? or the procedure.
Thanks and regards.
Mariano

http://download.oracle.com/docs/cd/E11882_01/server.112/e10819/toc.htm
metalink - Oracle 11gR2 Upgrade Companion [ID 785351.1]

RAC upgrade from11gR1 to 11gR2

Similar Messages

Maybe you are looking for