Radeon DPM/mclk value
Hi,
I've run into this issue in the past and was never able to figure it out.
When running a refresh rate / resolution combination which requires a bit more "umph" from the graphic card, default memory clocks when low can cause artifacting on the desktop. This can be fixed by changing the mclk of the low power state to a higher value.
I can't figure out how to change the dpm profiles... I know dpm is on, I can see it switch states properly.
I'd appreciate if someone could point me in the right direction.
Thanks,
For now I switched to using the "high" performance level. This seems to have only bumped up the mclk (to max value). So it should be ok. GPU temp did go from ~40 idle to ~50 so I'm guessing voltages were also bumped up.
Used
#echo high > /sys/class/drm/card0/device/power_dpm_force_performance_level
Similar Messages
-
ATI HD 6950 hangs at startup when radeon.dpm=1 is enabled
I have been trying to get Radeon DPM (dynamic power management) to work since kernel 3.11 was released. Every time I add "radeon.dpm=1" to the kernel parameters, the system hangs immediately after startup (by which I mean immediately after I select an option from GRUB). No log of any form is produced from that particular power-up. From the systemd journal, it appears as if I didn't power up the computer at all. The system does not respond to SysRq, and there is no hard-disk activity at all after the system hangs. I tried with the stock Arch kernel and the mainline kernel up to 3.12R6 with no success.
I am using a ATI HD 6950 card on a ASUS P8H67-M LE motherboard, and my CPU is Intel i5-2400. Can any give me some clue how to start debugging this problem? I have seen on phronix that a HD 6950 card does support DPM with kernel 3.11. Any help is sincerely appreciated.Thank you for your reply. I saw that bug report but I don't think it's the same problem as mine. He's having freezes at login or after, and he can SSH to the machine. On the other hand, my computer freezes immediately after the kernel starts to load, way before anything else can be loaded (definitely before systemd-journal loads, as there is no log whatsoever). There is no hard-disk activity at all after the freeze, and obviously I cannot SSH to my machine. Are you having similar problems?
-
[Solved] radeon module freezes system with dpm enabled
Hello,
I have been running my Radeon HD 5770 with xf86-video-ati (1:7.5.0-1) for quite some time now without any issues. Yesterday, I upgraded mesa and my system started to freeze with a black screen during boot. Blacklisting the radeon module allowed me to boot my system. Attempting to load radeon on a running system will also result in a black screen and a frozen machine. I was not able to recover any log output from the radeon module. Downgrading mesa did not resolve my problem.
Booting the kernel with radeon.dpm=0 seems to work. The fan noise is reduced by using dynpm for power_method. However, it would be nice to resolve this issue!
I'm running 3.18.6-1-ARCH. The mesa update:
[2015-02-07 11:52] [ALPM] transaction started
[2015-02-07 11:52] [ALPM] upgraded mesa (10.4.3-1 -> 10.4.4-1)
[2015-02-07 11:52] [ALPM] upgraded lib32-mesa (10.4.3-1 -> 10.4.4-1)
[2015-02-07 11:52] [ALPM] upgraded lib32-mesa-libgl (10.4.3-1 -> 10.4.4-1)
[2015-02-07 11:52] [ALPM] upgraded lib32-mesa-vdpau (10.4.3-1 -> 10.4.4-1)
[2015-02-07 11:52] [ALPM] upgraded mesa-libgl (10.4.3-1 -> 10.4.4-1)
[2015-02-07 11:52] [ALPM] upgraded mesa-vdpau (10.4.3-1 -> 10.4.4-1)
[2015-02-07 11:52] [ALPM] upgraded youtube-dl (2015.02.03-1 -> 2015.02.06-1)
[2015-02-07 11:52] [ALPM] transaction completed
Last edited by phaeilo (2015-02-09 19:26:44)I also experienced this problem when booting the Arch live cd. While the system was frozen, I moved my monitor's DVI connection to the other connector on my card. Suprisingly, the system became unfrozen and continued booting the live cd. Now the issue seems to be gone and I can boot from my harddisc with radeon.dpm enabled.
-
GPU Lockup, system crashes and reboot on Radeon op...
Hi, I've been using the Radeon open-source driver for a while (2 weeks) on an AM1 platform. And once in a while the screen just becomes erratic (or filled with crazy lines), then just reboot itself. I've extracted the relevant journalctl output (the one labelled 'kernel') that might help in finding out what the problem is. I've also included the dmesg, Xorg.0.log, and Xorg.0.log.old, though I find there's nothing fishy about it.
CPUinfo (I only use the Integrated Graphic Card)
processor : 0
vendor_id : AuthenticAMD
cpu family : 22
model : 0
model name : AMD Athlon(tm) 5350 APU with Radeon(tm) R3
stepping : 1
microcode : 0x700010b
cpu MHz : 800.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf eagerfpu pni pclmulqdq monitor ssse3 cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt topoext perfctr_nb perfctr_l2 arat xsaveopt hw_pstate proc_feedback npt lbrv svm_lock nrip_save tsc_scale flushbyasid decodeassists pausefilter pfthreshold bmi1
bogomips : 4094.89
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate [11]
processor : 1
vendor_id : AuthenticAMD
cpu family : 22
model : 0
model name : AMD Athlon(tm) 5350 APU with Radeon(tm) R3
stepping : 1
microcode : 0x700010b
cpu MHz : 800.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf eagerfpu pni pclmulqdq monitor ssse3 cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt topoext perfctr_nb perfctr_l2 arat xsaveopt hw_pstate proc_feedback npt lbrv svm_lock nrip_save tsc_scale flushbyasid decodeassists pausefilter pfthreshold bmi1
bogomips : 4094.89
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate [11]
processor : 2
vendor_id : AuthenticAMD
cpu family : 22
model : 0
model name : AMD Athlon(tm) 5350 APU with Radeon(tm) R3
stepping : 1
microcode : 0x700010b
cpu MHz : 800.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf eagerfpu pni pclmulqdq monitor ssse3 cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt topoext perfctr_nb perfctr_l2 arat xsaveopt hw_pstate proc_feedback npt lbrv svm_lock nrip_save tsc_scale flushbyasid decodeassists pausefilter pfthreshold bmi1
bogomips : 4094.89
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate [11]
processor : 3
vendor_id : AuthenticAMD
cpu family : 22
model : 0
model name : AMD Athlon(tm) 5350 APU with Radeon(tm) R3
stepping : 1
microcode : 0x700010b
cpu MHz : 800.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf eagerfpu pni pclmulqdq monitor ssse3 cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt topoext perfctr_nb perfctr_l2 arat xsaveopt hw_pstate proc_feedback npt lbrv svm_lock nrip_save tsc_scale flushbyasid decodeassists pausefilter pfthreshold bmi1
bogomips : 4094.89
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate [11]
Journalctl
Jul 31 12:45:05 Schmidt slim[261]: [21806:21834:0731/124505:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:45:07 Schmidt slim[261]: [WARNING:flash/platform/pepper/pep_module.cpp(63)] SANDBOXED
Jul 31 12:45:23 Schmidt slim[261]: [21806:21834:0731/124523:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:45:23 Schmidt slim[261]: [21806:21834:0731/124523:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:46:03 Schmidt slim[261]: [21806:21834:0731/124603:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:46:03 Schmidt slim[261]: [21806:21834:0731/124603:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:53:35 Schmidt slim[261]: [21806:21834:0731/125335:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:53:35 Schmidt slim[261]: [21806:21834:0731/125335:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:53:36 Schmidt slim[261]: [21806:21834:0731/125336:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:53:36 Schmidt slim[261]: [21806:21834:0731/125336:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:53:37 Schmidt slim[261]: [21806:21834:0731/125337:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:53:37 Schmidt slim[261]: [21806:21834:0731/125337:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:53:38 Schmidt slim[261]: [21806:21834:0731/125338:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:53:38 Schmidt slim[261]: [21806:21834:0731/125338:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:54:37 Schmidt slim[261]: [21806:21834:0731/125437:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:54:37 Schmidt slim[261]: [21806:21834:0731/125437:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:54:56 Schmidt slim[261]: [21806:21834:0731/125456:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:54:56 Schmidt slim[261]: [21806:21834:0731/125456:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:58:45 Schmidt slim[261]: [21806:21834:0731/125845:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:58:45 Schmidt slim[261]: [21806:21834:0731/125845:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:58:58 Schmidt slim[261]: [21806:21834:0731/125858:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:58:58 Schmidt slim[261]: [21806:21834:0731/125858:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:59:00 Schmidt slim[261]: [: ']' expected
Jul 31 12:59:02 Schmidt dbus[254]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Jul 31 12:59:02 Schmidt udisksd[1484]: udisks daemon version 2.1.3 starting
Jul 31 12:59:02 Schmidt dbus[254]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Jul 31 12:59:02 Schmidt udisksd[1484]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Jul 31 12:59:03 Schmidt slim[261]: ** (pcmanfm:1478): WARNING **: terminal termite isn't known, consider report it to LibFM developers
Jul 31 12:59:03 Schmidt slim[261]: ** (pcmanfm:1478): WARNING **: The directory '~/Templates' doesn't exist, ignoring it
Jul 31 12:59:18 Schmidt slim[261]: [21806:21834:0731/125918:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:59:18 Schmidt slim[261]: [21806:21834:0731/125918:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:59:36 Schmidt slim[261]: [21806:21834:0731/125936:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:59:36 Schmidt slim[261]: [21806:21834:0731/125936:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 13:21:17 Schmidt kernel: radeon 0000:00:01.0: ring 0 stalled for more than 10003msec
Jul 31 13:21:17 Schmidt kernel: radeon 0000:00:01.0: GPU lockup (waiting for 0x00000000002228ef last fence id 0x00000000002228ee on ring 0)
Jul 31 13:21:17 Schmidt kernel: radeon 0000:00:01.0: failed to get a new IB (-35)
Jul 31 13:21:17 Schmidt kernel: radeon 0000:00:01.0: failed to get a new IB (-35)
Jul 31 13:21:18 Schmidt kernel: radeon 0000:00:01.0: ring 0 stalled for more than 10503msec
Jul 31 13:21:18 Schmidt kernel: radeon 0000:00:01.0: GPU lockup (waiting for 0x00000000002228ef last fence id 0x00000000002228ee on ring 0)
Jul 31 13:21:18 Schmidt kernel: radeon 0000:00:01.0: failed to get a new IB (-35)
Jul 31 13:21:18 Schmidt kernel: radeon 0000:00:01.0: failed to get a new IB (-35)
Jul 31 13:21:18 Schmidt kernel: radeon 0000:00:01.0: failed to get a new IB (-35)
Jul 31 13:21:18 Schmidt kernel: radeon 0000:00:01.0: failed to get a new IB (-35)
Jul 31 13:21:18 Schmidt kernel: radeon 0000:00:01.0: failed to get a new IB (-35)
Jul 31 13:21:18 Schmidt kernel: radeon 0000:00:01.0: failed to get a new IB (-35)
Jul 31 13:21:18 Schmidt kernel: radeon 0000:00:01.0: failed to get a new IB (-35)
Jul 31 13:21:18 Schmidt slim[261]: [21841:21857:0731/132118:ERROR:gpu_watchdog_thread.cc(253)] The GPU process hung. Terminating after 10000 ms.
Jul 31 13:21:18 Schmidt kernel: Watchdog[21857]: segfault at 0 ip 00007fbadba6d906 sp 00007fbac7c32890 error 6 in chromium[7fbad7f59000+5864000]
Jul 31 13:21:19 Schmidt kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Jul 31 13:21:20 Schmidt kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Jul 31 13:21:21 Schmidt kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Jul 31 13:21:22 Schmidt kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
-- Reboot --
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.7-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Mon Jul 28 20:06:17 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=4f7f0918-72a6-4e96-8326-d67b9581d5c2 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d5e5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d5e6000-0x000000009d615fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009d616000-0x000000009d650fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d651000-0x000000009d70efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009d70f000-0x000000009e3eafff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009e3eb000-0x000000009e42efff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000009e42f000-0x000000009e42ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e430000-0x000000009e437fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e438000-0x000000009e871fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e872000-0x000000009eff2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009eff3000-0x000000009effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0x9d6d5000 ACPI 2.0=0x9d6d5000 SMBIOS=0xf04d0 MPS=0xfd4b0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000003e000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000003e000-0x0000000000040000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000040000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002060000) (16MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000002060000-0x0000000037552000) (852MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000037552000-0x0000000037aa1000) (5MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000037aa1000-0x000000006a479000) (809MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x000000006a479000-0x000000008ebf1000) (583MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x000000008ebf1000-0x000000008ebf7000) (0MB)
[ 0.000000] efi: mem11: type=1, attr=0xf, range=[0x000000008ebf7000-0x000000008ec14000) (0MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x000000008ec14000-0x0000000091915000) (45MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000091915000-0x000000009196b000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x000000009196b000-0x000000009198f000) (0MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x000000009198f000-0x000000009199a000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x000000009199a000-0x0000000091a1a000) (0MB)
[ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x0000000091a1a000-0x0000000091a1b000) (0MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000091a1b000-0x0000000091a40000) (0MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x0000000091a40000-0x0000000091a4b000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x0000000091a4b000-0x0000000091a62000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x0000000091a62000-0x0000000091a63000) (0MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x0000000091a63000-0x0000000091a8a000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x0000000091a8a000-0x0000000091a8b000) (0MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x0000000091a8b000-0x0000000091acd000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x0000000091acd000-0x0000000091acf000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x0000000091acf000-0x0000000091af0000) (0MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x0000000091af0000-0x0000000091afb000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x0000000091afb000-0x0000000091b1e000) (0MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x0000000091b1e000-0x0000000091b40000) (0MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x0000000091b40000-0x0000000091b4d000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x0000000091b4d000-0x0000000091b4e000) (0MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x0000000091b4e000-0x0000000091b5d000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x0000000091b5d000-0x0000000091c0c000) (0MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x0000000091c0c000-0x0000000091c2c000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x0000000091c2c000-0x0000000091cc4000) (0MB)
[ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x0000000091cc4000-0x0000000091cc5000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x0000000091cc5000-0x0000000091d73000) (0MB)
[ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x0000000091d73000-0x0000000091d8f000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x0000000091d8f000-0x0000000091e21000) (0MB)
[ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x0000000091e21000-0x0000000091e41000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x0000000091e41000-0x0000000092059000) (2MB)
[ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x0000000092059000-0x000000009205c000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x000000009205c000-0x000000009207a000) (0MB)
[ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x000000009207a000-0x000000009207c000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x000000009207c000-0x000000009207e000) (0MB)
[ 0.000000] efi: mem46: type=7, attr=0xf, range=[0x000000009207e000-0x0000000092080000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x0000000092080000-0x0000000092083000) (0MB)
[ 0.000000] efi: mem48: type=7, attr=0xf, range=[0x0000000092083000-0x0000000092084000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x0000000092084000-0x000000009bd9e000) (157MB)
[ 0.000000] efi: mem50: type=7, attr=0xf, range=[0x000000009bd9e000-0x000000009bda1000) (0MB)
[ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x000000009bda1000-0x000000009bda2000) (0MB)
[ 0.000000] efi: mem52: type=7, attr=0xf, range=[0x000000009bda2000-0x000000009bda3000) (0MB)
[ 0.000000] efi: mem53: type=4, attr=0xf, range=[0x000000009bda3000-0x000000009ce78000) (16MB)
[ 0.000000] efi: mem54: type=7, attr=0xf, range=[0x000000009ce78000-0x000000009d31c000) (4MB)
[ 0.000000] efi: mem55: type=3, attr=0xf, range=[0x000000009d31c000-0x000000009d5e6000) (2MB)
[ 0.000000] efi: mem56: type=0, attr=0xf, range=[0x000000009d5e6000-0x000000009d5fe000) (0MB)
[ 0.000000] efi: mem57: type=0, attr=0xf, range=[0x000000009d5fe000-0x000000009d616000) (0MB)
[ 0.000000] efi: mem58: type=7, attr=0xf, range=[0x000000009d616000-0x000000009d645000) (0MB)
[ 0.000000] efi: mem59: type=2, attr=0xf, range=[0x000000009d645000-0x000000009d651000) (0MB)
[ 0.000000] efi: mem60: type=10, attr=0xf, range=[0x000000009d651000-0x000000009d6e7000) (0MB)
[ 0.000000] efi: mem61: type=10, attr=0xf, range=[0x000000009d6e7000-0x000000009d6f2000) (0MB)
[ 0.000000] efi: mem62: type=10, attr=0xf, range=[0x000000009d6f2000-0x000000009d70f000) (0MB)
[ 0.000000] efi: mem63: type=6, attr=0x800000000000000f, range=[0x000000009d70f000-0x000000009e11e000) (10MB)
[ 0.000000] efi: mem64: type=6, attr=0x800000000000000f, range=[0x000000009e11e000-0x000000009e215000) (0MB)
[ 0.000000] efi: mem65: type=6, attr=0x800000000000000f, range=[0x000000009e215000-0x000000009e217000) (0MB)
[ 0.000000] efi: mem66: type=6, attr=0x800000000000000f, range=[0x000000009e217000-0x000000009e330000) (1MB)
[ 0.000000] efi: mem67: type=6, attr=0x800000000000000f, range=[0x000000009e330000-0x000000009e332000) (0MB)
[ 0.000000] efi: mem68: type=6, attr=0x800000000000000f, range=[0x000000009e332000-0x000000009e3eb000) (0MB)
[ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x000000009e3eb000-0x000000009e3f8000) (0MB)
[ 0.000000] efi: mem70: type=5, attr=0x800000000000000f, range=[0x000000009e3f8000-0x000000009e42f000) (0MB)
[ 0.000000] efi: mem71: type=4, attr=0xf, range=[0x000000009e42f000-0x000000009e430000) (0MB)
[ 0.000000] efi: mem72: type=10, attr=0xf, range=[0x000000009e430000-0x000000009e438000) (0MB)
[ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x000000009e438000-0x000000009e58e000) (1MB)
[ 0.000000] efi: mem74: type=3, attr=0xf, range=[0x000000009e58e000-0x000000009e83a000) (2MB)
[ 0.000000] efi: mem75: type=4, attr=0xf, range=[0x000000009e83a000-0x000000009e852000) (0MB)
[ 0.000000] efi: mem76: type=3, attr=0xf, range=[0x000000009e852000-0x000000009e864000) (0MB)
[ 0.000000] efi: mem77: type=4, attr=0xf, range=[0x000000009e864000-0x000000009e865000) (0MB)
[ 0.000000] efi: mem78: type=3, attr=0xf, range=[0x000000009e865000-0x000000009e867000) (0MB)
[ 0.000000] efi: mem79: type=4, attr=0xf, range=[0x000000009e867000-0x000000009e872000) (0MB)
[ 0.000000] efi: mem80: type=6, attr=0x800000000000000f, range=[0x000000009e872000-0x000000009eff3000) (7MB)
[ 0.000000] efi: mem81: type=4, attr=0xf, range=[0x000000009eff3000-0x000000009f000000) (0MB)
[ 0.000000] efi: mem82: type=7, attr=0xf, range=[0x0000000100000000-0x000000023f000000) (5104MB)
[ 0.000000] efi: mem83: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem84: type=11, attr=0x8000000000000001, range=[0x00000000fec01000-0x00000000fec02000) (0MB)
[ 0.000000] efi: mem85: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
[ 0.000000] efi: mem86: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
[ 0.000000] efi: mem87: type=11, attr=0x8000000000000001, range=[0x00000000fed40000-0x00000000fed45000) (0MB)
[ 0.000000] efi: mem88: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed81000) (0MB)
[ 0.000000] efi: mem89: type=11, attr=0x8000000000000001, range=[0x00000000fed81000-0x00000000fed90000) (0MB)
[ 0.000000] efi: mem90: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: MSI MS-7865/AM1I (MS-7865), BIOS V10.0 02/21/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000023f000000 aka 9200M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xa0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd6f0-0x000fd6ff] mapped at [ffff8800000fd6f0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23ee00000-0x23effffff]
[ 0.000000] [mem 0x23ee00000-0x23effffff] page 2M
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23edfffff]
[ 0.000000] [mem 0x23c000000-0x23edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[ 0.000000] [mem 0x200000000-0x23bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9d5e5fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9d3fffff] page 2M
[ 0.000000] [mem 0x9d400000-0x9d5e5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9d616000-0x9d650fff]
[ 0.000000] [mem 0x9d616000-0x9d650fff] page 4k
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9e42f000-0x9e42ffff]
[ 0.000000] [mem 0x9e42f000-0x9e42ffff] page 4k
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9e438000-0x9e871fff]
[ 0.000000] [mem 0x9e438000-0x9e5fffff] page 4k
[ 0.000000] [mem 0x9e600000-0x9e7fffff] page 2M
[ 0.000000] [mem 0x9e800000-0x9e871fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9eff3000-0x9effffff]
[ 0.000000] [mem 0x9eff3000-0x9effffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x37552000-0x37aa0fff]
[ 0.000000] ACPI: RSDP 0x000000009D6D5000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000009D6D5078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009D6DA208 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140214/tbfadt-634)
[ 0.000000] ACPI: DSDT 0x000000009D6D5188 00507E (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009D705D80 000040
[ 0.000000] ACPI: APIC 0x000000009D6DA318 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000009D6DA398 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000009D6DA3E0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x000000009D6DA420 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x000000009D6DA458 000E58 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009D6DB2B0 0046B7 (v02 AMD AGESA 00000002 MSFT 04000000)
[ 0.000000] ACPI: CRAT 0x000000009D6DF968 0003A8 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009D6DFD10 001204 (v01 AMD CPMCMN 00000001 INTL 20051117)
[ 0.000000] ACPI: BGRT 0x000000009D6E0F18 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23effffff]
[ 0.000000] NODE_DATA [mem 0x23eff7000-0x23effbfff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0x9d5e5fff]
[ 0.000000] node 0: [mem 0x9d616000-0x9d650fff]
[ 0.000000] node 0: [mem 0x9e42f000-0x9e42ffff]
[ 0.000000] node 0: [mem 0x9e438000-0x9e871fff]
[ 0.000000] node 0: [mem 0x9eff3000-0x9effffff]
[ 0.000000] node 0: [mem 0x100000000-0x23effffff]
[ 0.000000] On node 0 totalpages: 1952264
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 27 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10026 pages used for memmap
[ 0.000000] DMA32 zone: 641641 pages, LIFO batch:31
[ 0.000000] Normal zone: 20416 pages used for memmap
[ 0.000000] Normal zone: 1306624 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec01000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d5e6000-0x9d615fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d651000-0x9d70efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d70f000-0x9e3eafff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e3eb000-0x9e42efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e430000-0x9e437fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e872000-0x9eff2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x9f000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023ec00000 s87168 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s87168 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1921731
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=4f7f0918-72a6-4e96-8326-d67b9581d5c2 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 88000000
[ 0.000000] PM: Registered nosave memory: [mem 0x88000000-0x8bffffff]
[ 0.000000] Memory: 7345896K/7809056K available (5225K kernel code, 886K rwdata, 1644K rodata, 1116K init, 1284K bss, 463160K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 31457280 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2046.190 MHz processor
[ 0.000044] Calibrating delay loop (skipped), value calculated using timer frequency.. 4094.89 BogoMIPS (lpj=6820633)
[ 0.000049] pid_max: default: 32768 minimum: 301
[ 0.000060] ACPI: Core revision 20140214
[ 0.011848] ACPI: All ACPI Tables successfully acquired
[ 0.013681] Security Framework initialized
[ 0.013693] Yama: becoming mindful.
[ 0.014576] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.017768] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.019267] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.019289] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.019649] Initializing cgroup subsys memory
[ 0.019659] Initializing cgroup subsys devices
[ 0.019663] Initializing cgroup subsys freezer
[ 0.019666] Initializing cgroup subsys net_cls
[ 0.019669] Initializing cgroup subsys blkio
[ 0.019702] tseg: 009f000000
[ 0.019706] CPU: Physical Processor ID: 0
[ 0.019708] CPU: Processor Core ID: 0
[ 0.019711] mce: CPU supports 6 MCE banks
[ 0.019723] LVT offset 1 assigned for vector 0xf9
[ 0.019731] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
tlb_flushall_shift: 6
[ 0.019867] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
[ 0.029250] ftrace: allocating 20230 entries in 80 pages
[ 0.041155] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074138] smpboot: CPU0: AMD Athlon(tm) 5350 APU with Radeon(tm) R3 (fam: 16, model: 00, stepping: 01)
[ 0.180173] Performance Events: AMD PMU driver.
[ 0.180180] ... version: 0
[ 0.180182] ... bit width: 48
[ 0.180184] ... generic registers: 4
[ 0.180187] ... value mask: 0000ffffffffffff
[ 0.180189] ... max period: 00007fffffffffff
[ 0.180190] ... fixed-purpose events: 0
[ 0.180192] ... event mask: 000000000000000f
[ 0.200411] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.207126] x86: Booting SMP configuration:
[ 0.207133] .... node #0, CPUs: #1 #2 #3
[ 0.260333] x86: Booted up 1 node, 4 CPUs
[ 0.260341] smpboot: Total of 4 processors activated (16376.58 BogoMIPS)
[ 0.261382] devtmpfs: initialized
[ 0.268220] PM: Registering ACPI NVS region [mem 0x9d651000-0x9d70efff] (778240 bytes)
[ 0.268242] PM: Registering ACPI NVS region [mem 0x9e430000-0x9e437fff] (32768 bytes)
[ 0.269820] pinctrl core: initialized pinctrl subsystem
[ 0.269856] RTC time: 6:21:54, date: 07/31/14
[ 0.269922] NET: Registered protocol family 16
[ 0.270081] cpuidle: using governor ladder
[ 0.270084] cpuidle: using governor menu
[ 0.270163] ACPI: bus type PCI registered
[ 0.270166] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.270256] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.270260] PCI: not using MMCONFIG
[ 0.270264] PCI: Using configuration type 1 for base access
[ 0.270265] PCI: Using configuration type 1 for extended access
[ 0.271917] ACPI: Added _OSI(Module Device)
[ 0.271920] ACPI: Added _OSI(Processor Device)
[ 0.271922] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.271924] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.274782] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.281018] ACPI: Interpreter enabled
[ 0.281028] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[ 0.281035] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.281058] ACPI: (supports S0 S3 S4 S5)
[ 0.281060] ACPI: Using IOAPIC for interrupt routing
[ 0.281093] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.281158] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.281837] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.406483] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.406495] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.406752] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.406890] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.406896] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.406900] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.406903] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.407475] PCI host bridge to bus 0000:00
[ 0.407480] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.407484] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.407487] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.407490] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.407494] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.407497] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.407500] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.407503] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.407515] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
[ 0.407651] pci 0000:00:01.0: [1002:9830] type 00 class 0x030000
[ 0.407669] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.407682] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
[ 0.407691] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
[ 0.407700] pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
[ 0.407709] pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
[ 0.407754] pci 0000:00:01.0: supports D1 D2
[ 0.407757] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.407865] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[ 0.407880] pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
[ 0.407949] pci 0000:00:01.1: supports D1 D2
[ 0.408043] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
[ 0.408161] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
[ 0.408240] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.408296] pci 0000:00:02.4: System wakeup disabled by ACPI
[ 0.408385] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.408406] pci 0000:00:10.0: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
[ 0.408505] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.408562] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.408634] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.408654] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.408664] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.408674] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.408684] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.408693] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.408704] pci 0000:00:11.0: reg 0x24: [mem 0xfeb6e000-0xfeb6e3ff]
[ 0.408752] pci 0000:00:11.0: PME# supported from D3hot
[ 0.408858] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.408872] pci 0000:00:12.0: reg 0x10: [mem 0xfeb6d000-0xfeb6dfff]
[ 0.408963] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.409028] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.409047] pci 0000:00:12.2: reg 0x10: [mem 0xfeb6c000-0xfeb6c0ff]
[ 0.409119] pci 0000:00:12.2: supports D1 D2
[ 0.409122] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.409172] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.409235] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.409249] pci 0000:00:13.0: reg 0x10: [mem 0xfeb6b000-0xfeb6bfff]
[ 0.409340] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.409404] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.409422] pci 0000:00:13.2: reg 0x10: [mem 0xfeb6a000-0xfeb6a0ff]
[ 0.409495] pci 0000:00:13.2: supports D1 D2
[ 0.409498] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.409547] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.409611] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.409751] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.409771] pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
[ 0.409830] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.409878] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.409938] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.410088] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
[ 0.410195] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[ 0.410290] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[ 0.410385] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[ 0.410486] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[ 0.410580] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[ 0.410775] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.410803] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.410837] pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea00fff 64bit]
[ 0.410860] pci 0000:01:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
[ 0.410961] pci 0000:01:00.0: supports D1 D2
[ 0.410964] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.416988] pci 0000:00:02.4: PCI bridge to [bus 01]
[ 0.417002] pci 0000:00:02.4: bridge window [io 0xe000-0xefff]
[ 0.417007] pci 0000:00:02.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.417015] pci 0000:00:02.4: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.417355] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
[ 0.417460] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *5 7 10 11 14 15)
[ 0.417565] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 *11 14 15)
[ 0.417670] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 *10 11 14 15)
[ 0.417756] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 *11 14 15)
[ 0.417837] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 *10 11 14 15)
[ 0.417908] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.417979] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 *5 7 10 11 14 15)
[ 0.418370] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.418377] vgaarb: loaded
[ 0.418379] vgaarb: bridge control possible 0000:00:01.0
[ 0.418493] PCI: Using ACPI for IRQ routing
[ 0.425615] PCI: pci_cache_line_size set to 64 bytes
[ 0.425669] e820: reserve RAM buffer [mem 0x9d5e6000-0x9fffffff]
[ 0.425673] e820: reserve RAM buffer [mem 0x9d651000-0x9fffffff]
[ 0.425676] e820: reserve RAM buffer [mem 0x9e430000-0x9fffffff]
[ 0.425679] e820: reserve RAM buffer [mem 0x9e872000-0x9fffffff]
[ 0.425681] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
[ 0.425683] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
[ 0.425838] NetLabel: Initializing
[ 0.425840] NetLabel: domain hash size = 128
[ 0.425842] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.425861] NetLabel: unlabeled traffic allowed by default
[ 0.425889] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.425894] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.427961] Switched to clocksource hpet
[ 0.435472] pnp: PnP ACPI init
[ 0.435501] ACPI: bus type PNP registered
[ 0.435697] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.435704] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.435836] system 00:01: [mem 0xa0000000-0xbfffffff] has been reserved
[ 0.435840] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.436048] system 00:02: [io 0x0a00-0x0a0f] has been reserved
[ 0.436052] system 00:02: [io 0x0a10-0x0a1f] has been reserved
[ 0.436056] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.436308] pnp 00:03: [dma 0 disabled]
[ 0.436387] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.436455] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.436473] pnp 00:05: [dma 4]
[ 0.436507] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.436563] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.436605] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.436701] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.436706] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.436759] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.437185] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.437189] system 00:0a: [io 0x040b] has been reserved
[ 0.437193] system 00:0a: [io 0x04d6] has been reserved
[ 0.437196] system 00:0a: [io 0x0c00-0x0c01] has been reserved
[ 0.437200] system 00:0a: [io 0x0c14] has been reserved
[ 0.437203] system 00:0a: [io 0x0c50-0x0c51] has been reserved
[ 0.437206] system 00:0a: [io 0x0c52] has been reserved
[ 0.437210] system 00:0a: [io 0x0c6c] has been reserved
[ 0.437213] system 00:0a: [io 0x0c6f] has been reserved
[ 0.437216] system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
[ 0.437220] system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
[ 0.437223] system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
[ 0.437227] system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
[ 0.437230] system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
[ 0.437234] system 00:0a: [io 0x0800-0x089f] could not be reserved
[ 0.437237] system 00:0a: [io 0x0b20-0x0b3f] has been reserved
[ 0.437241] system 00:0a: [io 0x0900-0x090f] has been reserved
[ 0.437244] system 00:0a: [io 0x0910-0x091f] has been reserved
[ 0.437248] system 00:0a: [io 0xfe00-0xfefe] has been reserved
[ 0.437252] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.437256] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.437260] system 00:0a: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.437264] system 00:0a: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.437268] system 00:0a: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.437272] system 00:0a: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.437276] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.437280] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.437634] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.437642] pnp: PnP ACPI: found 12 devices
[ 0.437644] ACPI: bus type PNP unregistered
[ 0.445912] pci 0000:00:02.4: PCI bridge to [bus 01]
[ 0.445918] pci 0000:00:02.4: bridge window [io 0xe000-0xefff]
[ 0.445925] pci 0000:00:02.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.445930] pci 0000:00:02.4: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.445938] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.445941] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.445945] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.445948] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.445951] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.445955] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.445958] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.445962] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.445965] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.445968] pci_bus 0000:01: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.446002] NET: Registered protocol family 2
[ 0.446281] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.446558] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.446851] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.446905] TCP: reno registered
[ 0.446922] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.446984] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.447118] NET: Registered protocol family 1
[ 0.447142] pci 0000:00:01.0: Boot video device
[ 0.447923] PCI: CLS 64 bytes, default 64
[ 0.448045] Unpacking initramfs...
[ 0.589159] Freeing initrd memory: 5436K (ffff880037552000 - ffff880037aa1000)
[ 0.589170] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.589175] software IO TLB [mem 0x8d915000-0x91915000] (64MB) mapped at [ffff88008d915000-ffff880091914fff]
[ 0.589485] perf: AMD NB counters detected
[ 0.589488] perf: AMD L2I counters detected
[ 0.589530] LVT offset 0 assigned for vector 0x400
[ 0.589549] perf: AMD IBS detected (0x000000ff)
[ 0.589599] Scanning for low memory corruption every 60 seconds
[ 0.590047] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.608813] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.611213] zbud: loaded
[ 0.611474] VFS: Disk quotas dquot_6.5.2
[ 0.611533] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.611724] msgmni has been set to 14730
[ 0.611801] Key type big_key registered
[ 0.612044] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.612107] io scheduler noop registered
[ 0.612109] io scheduler deadline registered
[ 0.612157] io scheduler cfq registered (default)
[ 0.612452] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.612478] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.612532] efifb: probing for efifb
[ 0.612556] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 1984k, total 1984k
[ 0.612559] efifb: mode is 800x600x32, linelength=3328, pages=1
[ 0.612560] efifb: scrolling: redraw
[ 0.612564] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.614955] Console: switching to colour frame buffer device 100x37
[ 0.617194] fb0: EFI VGA frame buffer device
[ 0.617238] GHES: HEST is not enabled!
[ 0.617339] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.637865] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.638462] Linux agpgart interface v0.103
[ 0.638526] rtc_cmos 00:06: RTC can wake from S4
[ 0.638664] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.638693] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.638709] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.638849] TCP: cubic registered
[ 0.639009] NET: Registered protocol family 10
[ 0.639379] NET: Registered protocol family 17
[ 0.639856] registered taskstats version 1
[ 0.640289] Magic number: 6:792:368
[ 0.640394] rtc_cmos 00:06: setting system clock to 2014-07-31 06:21:55 UTC (1406787715)
[ 0.640489] PM: Hibernation image not present or could not be loaded.
[ 0.642246] Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
[ 0.642250] Write protecting the kernel read-only data: 8192k
[ 0.646438] Freeing unused kernel memory: 908K (ffff88000151d000 - ffff880001600000)
[ 0.648217] Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
[ 0.657217] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 0.659086] systemd-udevd[58]: starting version 215
[ 0.662926] [drm] Initialized drm 1.1.0 20060810
[ 0.671034] [drm] radeon kernel modesetting enabled.
[ 0.671150] checking generic (c0000000 1f0000) vs hw (c0000000 10000000)
[ 0.671153] fb: switching to radeondrmfb from EFI VGA
[ 0.671185] Console: switching to colour dummy device 80x25
[ 0.671723] [drm] initializing kernel modesetting (KABINI 0x1002:0x9830 0x1462:0x7865).
[ 0.671738] [drm] register mmio base: 0xFEB00000
[ 0.671740] [drm] register mmio size: 262144
[ 0.671746] [drm] doorbell mmio base: 0xD0000000
[ 0.671748] [drm] doorbell mmio size: 8388608
[ 0.671809] ATOM BIOS: AMD
[ 0.671880] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 0.671885] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 0.671888] [drm] Detected VRAM RAM=512M, BAR=256M
[ 0.671890] [drm] RAM width 128bits DDR
[ 0.671988] [TTM] Zone kernel: Available graphics memory: 3772324 kiB
[ 0.671990] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 0.671992] [TTM] Initializing pool allocator
[ 0.672000] [TTM] Initializing DMA pool allocator
[ 0.672032] [drm] radeon: 512M of VRAM memory ready
[ 0.672035] [drm] radeon: 1024M of GTT memory ready.
[ 0.672052] [drm] Loading KABINI Microcode
[ 0.672229] [drm] Internal thermal controller without fan control
[ 0.673446] [drm] radeon: dpm initialized
[ 0.675612] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 0.675625] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 0.696224] [drm] PCIE GART of 1024M enabled (table at 0x000000000078B000).
[ 0.696409] radeon 0000:00:01.0: WB enabled
[ 0.696430] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88003748cc00
[ 0.696435] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff88003748cc04
[ 0.696438] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff88003748cc08
[ 0.696442] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88003748cc0c
[ 0.696445] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff88003748cc10
[ 0.697358] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc900114b6c98
[ 0.697436] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0xffff88003748cc18
[ 0.697440] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0xffff88003748cc1c
[ 0.697443] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.697445] [drm] Driver supports precise vblank timestamp query.
[ 0.697478] radeon 0000:00:01.0: irq 72 for MSI/MSI-X
[ 0.697497] radeon 0000:00:01.0: radeon: using MSI.
[ 0.697532] [drm] radeon: irq initialized.
[ 0.701520] [drm] ring test on 0 succeeded in 3 usecs
[ 0.701607] [drm] ring test on 1 succeeded in 2 usecs
[ 0.701626] [drm] ring test on 2 succeeded in 2 usecs
[ 0.701847] [drm] ring test on 3 succeeded in 2 usecs
[ 0.701857] [drm] ring test on 4 succeeded in 2 usecs
[ 0.757869] [drm] ring test on 5 succeeded in 2 usecs
[ 0.777871] [drm] UVD initialized successfully.
[ 0.887860] [drm] ring test on 6 succeeded in 16 usecs
[ 0.887874] [drm] ring test on 7 succeeded in 4 usecs
[ 0.887876] [drm] VCE initialized successfully.
[ 0.888489] [drm] ib test on ring 0 succeeded in 0 usecs
[ 0.888658] [drm] ib test on ring 1 succeeded in 0 usecs
[ 0.888823] [drm] ib test on ring 2 succeeded in 0 usecs
[ 0.888994] [drm] ib test on ring 3 succeeded in 0 usecs
[ 0.889165] [drm] ib test on ring 4 succeeded in 0 usecs
[ 0.909894] [drm] ib test on ring 5 succeeded
[ 0.930782] [drm] ib test on ring 6 succeeded
[ 0.931484] [drm] ib test on ring 7 succeeded
[ 0.931990] [drm] Radeon Display Connectors
[ 0.931992] [drm] Connector 0:
[ 0.931995] [drm] DVI-D-1
[ 0.931996] [drm] HPD1
[ 0.932000] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 0.932001] [drm] Encoders:
[ 0.932003] [drm] DFP1: INTERNAL_UNIPHY
[ 0.932005] [drm] Connector 1:
[ 0.932006] [drm] HDMI-A-1
[ 0.932008] [drm] HPD2
[ 0.932010] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 0.932012] [drm] Encoders:
[ 0.932013] [drm] DFP2: INTERNAL_UNIPHY
[ 0.932015] [drm] Connector 2:
[ 0.932017] [drm] VGA-1
[ 0.932019] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[ 0.932021] [drm] Encoders:
[ 0.932022] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.001611] [drm] fb mappable at 0xC098F000
[ 1.001617] [drm] vram apper at 0xC0000000
[ 1.001619] [drm] size 9216000
[ 1.001621] [drm] fb depth is 24
[ 1.001623] [drm] pitch is 7680
[ 1.001804] fbcon: radeondrmfb (fb0) is primary device
[ 1.015644] Console: switching to colour frame buffer device 240x75
[ 1.026503] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 1.026506] radeon 0000:00:01.0: registered panic notifier
[ 1.038849] [drm] Initialized radeon 2.38.0 20080528 for 0000:00:01.0 on minor 0
[ 1.055835] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.056244] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.056312] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.064941] ACPI: bus type USB registered
[ 1.064996] usbcore: registered new interface driver usbfs
[ 1.065018] usbcore: registered new interface driver hub
[ 1.065146] SCSI subsystem initialized
[ 1.065204] usbcore: registered new device driver usb
[ 1.066382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.066612] ehci-pci: EHCI PCI platform driver
[ 1.066788] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.066803] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.066815] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.066825] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.066837] ehci-pci 0000:00:12.2: debug port 1
[ 1.066892] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6c000
[ 1.067752] libata version 3.00 loaded.
[ 1.067862] ohci-pci: OHCI PCI platform driver
[ 1.074092] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.074426] hub 1-0:1.0: USB hub found
[ 1.074443] hub 1-0:1.0: 4 ports detected
[ 1.074844] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.074856] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.074863] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.074875] ehci-pci 0000:00:13.2: debug port 1
[ 1.074916] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6a000
[ 1.084102] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.084415] hub 2-0:1.0: USB hub found
[ 1.084434] hub 2-0:1.0: 4 ports detected
[ 1.084860] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.084872] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.084920] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb6d000
[ 1.141863] hub 3-0:1.0: USB hub found
[ 1.141884] hub 3-0:1.0: 4 ports detected
[ 1.142256] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.142266] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 1.142299] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6b000
[ 1.198481] hub 4-0:1.0: USB hub found
[ 1.198502] hub 4-0:1.0: 4 ports detected
[ 1.198920] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.198931] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
[ 1.199175] xhci_hcd 0000:00:10.0: irq 73 for MSI/MSI-X
[ 1.199183] xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
[ 1.199190] xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X
[ 1.199197] xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
[ 1.199203] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
[ 1.199532] hub 5-0:1.0: USB hub found
[ 1.199548] hub 5-0:1.0: 2 ports detected
[ 1.199699] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.199704] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[ 1.202754] hub 6-0:1.0: USB hub found
[ 1.202769] hub 6-0:1.0: 2 ports detected
[ 1.202950] ahci 0000:00:11.0: version 3.0
[ 1.203084] ahci 0000:00:11.0: irq 78 for MSI/MSI-X
[ 1.203140] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.203145] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio
[ 1.203704] scsi0 : ahci
[ 1.203914] scsi1 : ahci
[ 1.204035] ata1: SATA max UDMA/133 abar m1024@0xfeb6e000 port 0xfeb6e100 irq 78
[ 1.204040] ata2: SATA max UDMA/133 abar m1024@0xfeb6e000 port 0xfeb6e180 irq 78
[ 1.590390] tsc: Refined TSC clocksource calibration: 2046.162 MHz
[ 1.690314] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.690346] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.691535] ata1.00: ATA-8: WDC WD10JUCT-63J6SY0, 01.01A01, max UDMA/133
[ 1.691539] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.692173] ata2.00: supports DRM functions and may not be fully accessible
[ 1.692237] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.692241] ata2.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB6Q, max UDMA/133
[ 1.692244] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.692416] ata2.00: supports DRM functions and may not be fully accessible
[ 1.692474] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.692479] ata2.00: configured for UDMA/133
[ 1.692763] ata1.00: configured for UDMA/133
[ 1.692974] scsi 0:0:0:0: Direct-Access ATA WDC WD10JUCT-63J 01.0 PQ: 0 ANSI: 5
[ 1.693474] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5
[ 1.697997] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.698004] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.698115] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.698136] sd 0:0:0:0: [sda] Write Protect is off
[ 1.698141] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.698197] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.698287] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.698292] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.698353] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.703046] sdb: sdb1 sdb2 sdb3
[ 1.703853] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.748041] sda: sda1
[ 1.748649] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.930090] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.054369] hub 2-1:1.0: USB hub found
[ 2.054431] hub 2-1:1.0: 4 ports detected
[ 2.159797] usb 2-2: new high-speed USB device number 3 using ehci-pci
[ 2.180049] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.412957] usb 3-1: new low-speed USB device number 2 using ohci-pci
[ 2.501371] EXT4-fs (sdb3): re-mounted. Opts: data=ordered
[ 2.538483] systemd-udevd[152]: starting version 215
[ 2.592784] Switched to clocksource tsc
[ 2.604729] ACPI: acpi_idle registered with cpuidle
[ 2.606464] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 2.606474] ACPI: Power Button [PWRB]
[ 2.606559] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.606564] ACPI: Power Button [PWRF]
[ 2.613637] acpi-cpufreq: overriding BIOS provided _PSD data
[ 2.613705] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.621328] wmi: Mapper loaded
[ 2.627446] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 2.627520] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 2.628660] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.628678] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.636642] r8169 0000:01:00.0: irq 79 for MSI/MSI-X
[ 2.636694] MCE: In-kernel MCE decoding enabled.
[ 2.636699] [Hardware Error]: System Fatal error.
[ 2.636752] [Hardware Error]: CPU:0 (16:0:1) MC4_STATUS[Over|UE|-|PCC|AddrV|-|-]: 0xf600000000070f0f
[ 2.636830] [Hardware Error]: MC4_ADDR: 0x00000000c098de00
[ 2.636874] [Hardware Error]: MC4 Error (node 0): Watchdog timeout due to lack of progress.
[ 2.636943] [Hardware Error]: cache level: L3/GEN
[ 2.636976] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xffffc900135fe000, 44:8a:5b:8b:f0:c6, XID 0c000800 IRQ 7Thanks I tried adding 'iommu=soft' to the grub parameter, and at the very least the IOMMU warning doesn't show up in dmesg anymore.
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.7-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Mon Jul 28 20:06:17 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=4f7f0918-72a6-4e96-8326-d67b9581d5c2 rw quiet iommu=soft
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d5e5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d5e6000-0x000000009d615fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009d616000-0x000000009d650fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d651000-0x000000009d70efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009d70f000-0x000000009e3eafff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009e3eb000-0x000000009e42efff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000009e42f000-0x000000009e42ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e430000-0x000000009e437fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e438000-0x000000009e871fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e872000-0x000000009eff2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009eff3000-0x000000009effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0x9d6d5000 ACPI 2.0=0x9d6d5000 SMBIOS=0xf04d0 MPS=0xfd4b0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000003e000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000003e000-0x0000000000040000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000040000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002060000) (16MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000002060000-0x0000000037552000) (852MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000037552000-0x0000000037aa1000) (5MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000037aa1000-0x000000006a479000) (809MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x000000006a479000-0x000000008ebf1000) (583MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x000000008ebf1000-0x000000008ebf7000) (0MB)
[ 0.000000] efi: mem11: type=1, attr=0xf, range=[0x000000008ebf7000-0x000000008ec14000) (0MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x000000008ec14000-0x0000000091915000) (45MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000091915000-0x000000009196b000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x000000009196b000-0x000000009198f000) (0MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x000000009198f000-0x000000009199a000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x000000009199a000-0x0000000091a1a000) (0MB)
[ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x0000000091a1a000-0x0000000091a1b000) (0MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000091a1b000-0x0000000091a40000) (0MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x0000000091a40000-0x0000000091a4b000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x0000000091a4b000-0x0000000091a62000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x0000000091a62000-0x0000000091a63000) (0MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x0000000091a63000-0x0000000091a8a000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x0000000091a8a000-0x0000000091a8b000) (0MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x0000000091a8b000-0x0000000091acd000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x0000000091acd000-0x0000000091acf000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x0000000091acf000-0x0000000091af0000) (0MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x0000000091af0000-0x0000000091afb000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x0000000091afb000-0x0000000091b1e000) (0MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x0000000091b1e000-0x0000000091b40000) (0MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x0000000091b40000-0x0000000091b4d000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x0000000091b4d000-0x0000000091b4e000) (0MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x0000000091b4e000-0x0000000091b5d000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x0000000091b5d000-0x0000000091c0c000) (0MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x0000000091c0c000-0x0000000091c2c000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x0000000091c2c000-0x0000000091cc4000) (0MB)
[ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x0000000091cc4000-0x0000000091cc5000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x0000000091cc5000-0x0000000091d73000) (0MB)
[ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x0000000091d73000-0x0000000091d8f000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x0000000091d8f000-0x0000000091e21000) (0MB)
[ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x0000000091e21000-0x0000000091e41000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x0000000091e41000-0x0000000092059000) (2MB)
[ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x0000000092059000-0x000000009205c000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x000000009205c000-0x000000009207a000) (0MB)
[ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x000000009207a000-0x000000009207c000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x000000009207c000-0x000000009207e000) (0MB)
[ 0.000000] efi: mem46: type=7, attr=0xf, range=[0x000000009207e000-0x0000000092080000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x0000000092080000-0x0000000092083000) (0MB)
[ 0.000000] efi: mem48: type=7, attr=0xf, range=[0x0000000092083000-0x0000000092084000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x0000000092084000-0x000000009bd9e000) (157MB)
[ 0.000000] efi: mem50: type=7, attr=0xf, range=[0x000000009bd9e000-0x000000009bda1000) (0MB)
[ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x000000009bda1000-0x000000009bda2000) (0MB)
[ 0.000000] efi: mem52: type=7, attr=0xf, range=[0x000000009bda2000-0x000000009bda3000) (0MB)
[ 0.000000] efi: mem53: type=4, attr=0xf, range=[0x000000009bda3000-0x000000009ce78000) (16MB)
[ 0.000000] efi: mem54: type=7, attr=0xf, range=[0x000000009ce78000-0x000000009d31c000) (4MB)
[ 0.000000] efi: mem55: type=3, attr=0xf, range=[0x000000009d31c000-0x000000009d5e6000) (2MB)
[ 0.000000] efi: mem56: type=0, attr=0xf, range=[0x000000009d5e6000-0x000000009d5fe000) (0MB)
[ 0.000000] efi: mem57: type=0, attr=0xf, range=[0x000000009d5fe000-0x000000009d616000) (0MB)
[ 0.000000] efi: mem58: type=7, attr=0xf, range=[0x000000009d616000-0x000000009d645000) (0MB)
[ 0.000000] efi: mem59: type=2, attr=0xf, range=[0x000000009d645000-0x000000009d651000) (0MB)
[ 0.000000] efi: mem60: type=10, attr=0xf, range=[0x000000009d651000-0x000000009d6e7000) (0MB)
[ 0.000000] efi: mem61: type=10, attr=0xf, range=[0x000000009d6e7000-0x000000009d6f2000) (0MB)
[ 0.000000] efi: mem62: type=10, attr=0xf, range=[0x000000009d6f2000-0x000000009d70f000) (0MB)
[ 0.000000] efi: mem63: type=6, attr=0x800000000000000f, range=[0x000000009d70f000-0x000000009e11e000) (10MB)
[ 0.000000] efi: mem64: type=6, attr=0x800000000000000f, range=[0x000000009e11e000-0x000000009e215000) (0MB)
[ 0.000000] efi: mem65: type=6, attr=0x800000000000000f, range=[0x000000009e215000-0x000000009e217000) (0MB)
[ 0.000000] efi: mem66: type=6, attr=0x800000000000000f, range=[0x000000009e217000-0x000000009e330000) (1MB)
[ 0.000000] efi: mem67: type=6, attr=0x800000000000000f, range=[0x000000009e330000-0x000000009e332000) (0MB)
[ 0.000000] efi: mem68: type=6, attr=0x800000000000000f, range=[0x000000009e332000-0x000000009e3eb000) (0MB)
[ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x000000009e3eb000-0x000000009e3f8000) (0MB)
[ 0.000000] efi: mem70: type=5, attr=0x800000000000000f, range=[0x000000009e3f8000-0x000000009e42f000) (0MB)
[ 0.000000] efi: mem71: type=4, attr=0xf, range=[0x000000009e42f000-0x000000009e430000) (0MB)
[ 0.000000] efi: mem72: type=10, attr=0xf, range=[0x000000009e430000-0x000000009e438000) (0MB)
[ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x000000009e438000-0x000000009e58e000) (1MB)
[ 0.000000] efi: mem74: type=3, attr=0xf, range=[0x000000009e58e000-0x000000009e83a000) (2MB)
[ 0.000000] efi: mem75: type=4, attr=0xf, range=[0x000000009e83a000-0x000000009e852000) (0MB)
[ 0.000000] efi: mem76: type=3, attr=0xf, range=[0x000000009e852000-0x000000009e864000) (0MB)
[ 0.000000] efi: mem77: type=4, attr=0xf, range=[0x000000009e864000-0x000000009e865000) (0MB)
[ 0.000000] efi: mem78: type=3, attr=0xf, range=[0x000000009e865000-0x000000009e867000) (0MB)
[ 0.000000] efi: mem79: type=4, attr=0xf, range=[0x000000009e867000-0x000000009e872000) (0MB)
[ 0.000000] efi: mem80: type=6, attr=0x800000000000000f, range=[0x000000009e872000-0x000000009eff3000) (7MB)
[ 0.000000] efi: mem81: type=4, attr=0xf, range=[0x000000009eff3000-0x000000009f000000) (0MB)
[ 0.000000] efi: mem82: type=7, attr=0xf, range=[0x0000000100000000-0x000000023f000000) (5104MB)
[ 0.000000] efi: mem83: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem84: type=11, attr=0x8000000000000001, range=[0x00000000fec01000-0x00000000fec02000) (0MB)
[ 0.000000] efi: mem85: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
[ 0.000000] efi: mem86: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
[ 0.000000] efi: mem87: type=11, attr=0x8000000000000001, range=[0x00000000fed40000-0x00000000fed45000) (0MB)
[ 0.000000] efi: mem88: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed81000) (0MB)
[ 0.000000] efi: mem89: type=11, attr=0x8000000000000001, range=[0x00000000fed81000-0x00000000fed90000) (0MB)
[ 0.000000] efi: mem90: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: MSI MS-7865/AM1I (MS-7865), BIOS V10.0 02/21/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000023f000000 aka 9200M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xa0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd6f0-0x000fd6ff] mapped at [ffff8800000fd6f0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23ee00000-0x23effffff]
[ 0.000000] [mem 0x23ee00000-0x23effffff] page 2M
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23edfffff]
[ 0.000000] [mem 0x23c000000-0x23edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[ 0.000000] [mem 0x200000000-0x23bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9d5e5fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9d3fffff] page 2M
[ 0.000000] [mem 0x9d400000-0x9d5e5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9d616000-0x9d650fff]
[ 0.000000] [mem 0x9d616000-0x9d650fff] page 4k
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9e42f000-0x9e42ffff]
[ 0.000000] [mem 0x9e42f000-0x9e42ffff] page 4k
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9e438000-0x9e871fff]
[ 0.000000] [mem 0x9e438000-0x9e5fffff] page 4k
[ 0.000000] [mem 0x9e600000-0x9e7fffff] page 2M
[ 0.000000] [mem 0x9e800000-0x9e871fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9eff3000-0x9effffff]
[ 0.000000] [mem 0x9eff3000-0x9effffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x37552000-0x37aa0fff]
[ 0.000000] ACPI: RSDP 0x000000009D6D5000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000009D6D5078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009D6DA208 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140214/tbfadt-634)
[ 0.000000] ACPI: DSDT 0x000000009D6D5188 00507E (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009D705D80 000040
[ 0.000000] ACPI: APIC 0x000000009D6DA318 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000009D6DA398 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000009D6DA3E0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x000000009D6DA420 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x000000009D6DA458 000E58 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009D6DB2B0 0046B7 (v02 AMD AGESA 00000002 MSFT 04000000)
[ 0.000000] ACPI: CRAT 0x000000009D6DF968 0003A8 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009D6DFD10 001204 (v01 AMD CPMCMN 00000001 INTL 20051117)
[ 0.000000] ACPI: BGRT 0x000000009D6E0F18 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23effffff]
[ 0.000000] NODE_DATA [mem 0x23eff7000-0x23effbfff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0x9d5e5fff]
[ 0.000000] node 0: [mem 0x9d616000-0x9d650fff]
[ 0.000000] node 0: [mem 0x9e42f000-0x9e42ffff]
[ 0.000000] node 0: [mem 0x9e438000-0x9e871fff]
[ 0.000000] node 0: [mem 0x9eff3000-0x9effffff]
[ 0.000000] node 0: [mem 0x100000000-0x23effffff]
[ 0.000000] On node 0 totalpages: 1952264
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 27 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10026 pages used for memmap
[ 0.000000] DMA32 zone: 641641 pages, LIFO batch:31
[ 0.000000] Normal zone: 20416 pages used for memmap
[ 0.000000] Normal zone: 1306624 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec01000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d5e6000-0x9d615fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d651000-0x9d70efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d70f000-0x9e3eafff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e3eb000-0x9e42efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e430000-0x9e437fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e872000-0x9eff2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x9f000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023ec00000 s87168 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s87168 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1921731
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=4f7f0918-72a6-4e96-8326-d67b9581d5c2 rw quiet iommu=soft
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Memory: 7411432K/7809056K available (5225K kernel code, 886K rwdata, 1644K rodata, 1116K init, 1284K bss, 397624K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 31457280 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2046.201 MHz processor
[ 0.000044] Calibrating delay loop (skipped), value calculated using timer frequency.. 4094.91 BogoMIPS (lpj=6820670)
[ 0.000049] pid_max: default: 32768 minimum: 301
[ 0.000061] ACPI: Core revision 20140214
[ 0.011848] ACPI: All ACPI Tables successfully acquired
[ 0.013681] Security Framework initialized
[ 0.013691] Yama: becoming mindful.
[ 0.014550] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.017739] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.019244] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.019266] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.019626] Initializing cgroup subsys memory
[ 0.019635] Initializing cgroup subsys devices
[ 0.019639] Initializing cgroup subsys freezer
[ 0.019642] Initializing cgroup subsys net_cls
[ 0.019645] Initializing cgroup subsys blkio
[ 0.019678] tseg: 009f000000
[ 0.019682] CPU: Physical Processor ID: 0
[ 0.019684] CPU: Processor Core ID: 0
[ 0.019688] mce: CPU supports 6 MCE banks
[ 0.019697] LVT offset 1 assigned for vector 0xf9
[ 0.019705] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
tlb_flushall_shift: 6
[ 0.019841] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
[ 0.029272] ftrace: allocating 20230 entries in 80 pages
[ 0.041210] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074193] smpboot: CPU0: AMD Athlon(tm) 5350 APU with Radeon(tm) R3 (fam: 16, model: 00, stepping: 01)
[ 0.180173] Performance Events: AMD PMU driver.
[ 0.180180] ... version: 0
[ 0.180182] ... bit width: 48
[ 0.180184] ... generic registers: 4
[ 0.180186] ... value mask: 0000ffffffffffff
[ 0.180188] ... max period: 00007fffffffffff
[ 0.180190] ... fixed-purpose events: 0
[ 0.180191] ... event mask: 000000000000000f
[ 0.200416] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.207129] x86: Booting SMP configuration:
[ 0.207136] .... node #0, CPUs: #1 #2 #3
[ 0.260315] x86: Booted up 1 node, 4 CPUs
[ 0.260323] smpboot: Total of 4 processors activated (16376.67 BogoMIPS)
[ 0.261370] devtmpfs: initialized
[ 0.268212] PM: Registering ACPI NVS region [mem 0x9d651000-0x9d70efff] (778240 bytes)
[ 0.268234] PM: Registering ACPI NVS region [mem 0x9e430000-0x9e437fff] (32768 bytes)
[ 0.269808] pinctrl core: initialized pinctrl subsystem
[ 0.269843] RTC time: 13:47:40, date: 07/31/14
[ 0.269910] NET: Registered protocol family 16
[ 0.270072] cpuidle: using governor ladder
[ 0.270075] cpuidle: using governor menu
[ 0.270152] ACPI: bus type PCI registered
[ 0.270155] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.270246] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.270251] PCI: not using MMCONFIG
[ 0.270253] PCI: Using configuration type 1 for base access
[ 0.270255] PCI: Using configuration type 1 for extended access
[ 0.271913] ACPI: Added _OSI(Module Device)
[ 0.271916] ACPI: Added _OSI(Processor Device)
[ 0.271918] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.271921] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.274776] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.281005] ACPI: Interpreter enabled
[ 0.281016] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[ 0.281023] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.281046] ACPI: (supports S0 S3 S4 S5)
[ 0.281048] ACPI: Using IOAPIC for interrupt routing
[ 0.281081] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.281146] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.281826] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.409789] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.409802] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.410059] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.410197] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.410202] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.410206] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.410210] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.410783] PCI host bridge to bus 0000:00
[ 0.410788] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.410792] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.410796] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.410799] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.410802] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.410805] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.410809] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.410812] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.410824] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
[ 0.410960] pci 0000:00:01.0: [1002:9830] type 00 class 0x030000
[ 0.410978] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.410991] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
[ 0.411000] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
[ 0.411009] pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
[ 0.411018] pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
[ 0.411063] pci 0000:00:01.0: supports D1 D2
[ 0.411066] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.411174] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[ 0.411189] pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
[ 0.411258] pci 0000:00:01.1: supports D1 D2
[ 0.411352] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
[ 0.411469] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
[ 0.411549] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.411605] pci 0000:00:02.4: System wakeup disabled by ACPI
[ 0.411695] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.411715] pci 0000:00:10.0: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
[ 0.411814] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.411871] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.411943] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.411964] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.411974] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.411984] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.411993] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.412003] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.412013] pci 0000:00:11.0: reg 0x24: [mem 0xfeb6e000-0xfeb6e3ff]
[ 0.412062] pci 0000:00:11.0: PME# supported from D3hot
[ 0.412168] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.412182] pci 0000:00:12.0: reg 0x10: [mem 0xfeb6d000-0xfeb6dfff]
[ 0.412272] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.412338] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.412356] pci 0000:00:12.2: reg 0x10: [mem 0xfeb6c000-0xfeb6c0ff]
[ 0.412429] pci 0000:00:12.2: supports D1 D2
[ 0.412432] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.412481] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.412545] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.412559] pci 0000:00:13.0: reg 0x10: [mem 0xfeb6b000-0xfeb6bfff]
[ 0.412649] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.412713] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.412732] pci 0000:00:13.2: reg 0x10: [mem 0xfeb6a000-0xfeb6a0ff]
[ 0.412804] pci 0000:00:13.2: supports D1 D2
[ 0.412807] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.412856] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.412920] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.413059] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.413080] pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
[ 0.413138] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.413186] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.413246] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.413396] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
[ 0.413504] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[ 0.413599] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[ 0.413694] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[ 0.413795] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[ 0.413889] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[ 0.414084] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.414112] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.414145] pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea00fff 64bit]
[ 0.414168] pci 0000:01:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
[ 0.414270] pci 0000:01:00.0: supports D1 D2
[ 0.414273] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.420298] pci 0000:00:02.4: PCI bridge to [bus 01]
[ 0.420311] pci 0000:00:02.4: bridge window [io 0xe000-0xefff]
[ 0.420317] pci 0000:00:02.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.420325] pci 0000:00:02.4: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.420660] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
[ 0.420765] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *5 7 10 11 14 15)
[ 0.420871] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 *11 14 15)
[ 0.420975] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 *10 11 14 15)
[ 0.421061] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 *11 14 15)
[ 0.421142] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 *10 11 14 15)
[ 0.421213] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.421284] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 *5 7 10 11 14 15)
[ 0.421664] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.421671] vgaarb: loaded
[ 0.421673] vgaarb: bridge control possible 0000:00:01.0
[ 0.421788] PCI: Using ACPI for IRQ routing
[ 0.428911] PCI: pci_cache_line_size set to 64 bytes
[ 0.428965] e820: reserve RAM buffer [mem 0x9d5e6000-0x9fffffff]
[ 0.428969] e820: reserve RAM buffer [mem 0x9d651000-0x9fffffff]
[ 0.428972] e820: reserve RAM buffer [mem 0x9e430000-0x9fffffff]
[ 0.428975] e820: reserve RAM buffer [mem 0x9e872000-0x9fffffff]
[ 0.428977] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
[ 0.428979] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
[ 0.429134] NetLabel: Initializing
[ 0.429136] NetLabel: domain hash size = 128
[ 0.429138] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.429157] NetLabel: unlabeled traffic allowed by default
[ 0.429187] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.429192] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.431262] Switched to clocksource hpet
[ 0.438771] pnp: PnP ACPI init
[ 0.438801] ACPI: bus type PNP registered
[ 0.439000] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.439007] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.439140] system 00:01: [mem 0xa0000000-0xbfffffff] has been reserved
[ 0.439145] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.439353] system 00:02: [io 0x0a00-0x0a0f] has been reserved
[ 0.439357] system 00:02: [io 0x0a10-0x0a1f] has been reserved
[ 0.439361] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.439615] pnp 00:03: [dma 0 disabled]
[ 0.439694] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.439762] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.439780] pnp 00:05: [dma 4]
[ 0.439814] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.439870] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.439913] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.440008] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.440013] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.440066] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.440493] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.440497] system 00:0a: [io 0x040b] has been reserved
[ 0.440500] system 00:0a: [io 0x04d6] has been reserved
[ 0.440504] system 00:0a: [io 0x0c00-0x0c01] has been reserved
[ 0.440507] system 00:0a: [io 0x0c14] has been reserved
[ 0.440511] system 00:0a: [io 0x0c50-0x0c51] has been reserved
[ 0.440514] system 00:0a: [io 0x0c52] has been reserved
[ 0.440517] system 00:0a: [io 0x0c6c] has been reserved
[ 0.440521] system 00:0a: [io 0x0c6f] has been reserved
[ 0.440524] system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
[ 0.440527] system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
[ 0.440531] system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
[ 0.440534] system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
[ 0.440538] system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
[ 0.440541] system 00:0a: [io 0x0800-0x089f] could not be reserved
[ 0.440545] system 00:0a: [io 0x0b20-0x0b3f] has been reserved
[ 0.440548] system 00:0a: [io 0x0900-0x090f] has been reserved
[ 0.440552] system 00:0a: [io 0x0910-0x091f] has been reserved
[ 0.440555] system 00:0a: [io 0xfe00-0xfefe] has been reserved
[ 0.440560] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.440564] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.440568] system 00:0a: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.440572] system 00:0a: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.440576] system 00:0a: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.440579] system 00:0a: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.440583] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.440588] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.440940] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.440948] pnp: PnP ACPI: found 12 devices
[ 0.440950] ACPI: bus type PNP unregistered
[ 0.449216] pci 0000:00:02.4: PCI bridge to [bus 01]
[ 0.449222] pci 0000:00:02.4: bridge window [io 0xe000-0xefff]
[ 0.449228] pci 0000:00:02.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.449234] pci 0000:00:02.4: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.449242] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.449245] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.449248] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.449252] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.449255] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.449258] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.449261] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.449265] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.449268] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.449272] pci_bus 0000:01: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.449306] NET: Registered protocol family 2
[ 0.449586] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.449862] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.450156] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.450208] TCP: reno registered
[ 0.450226] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.450287] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.450425] NET: Registered protocol family 1
[ 0.450450] pci 0000:00:01.0: Boot video device
[ 0.451231] PCI: CLS 64 bytes, default 64
[ 0.451351] Unpacking initramfs...
[ 0.592512] Freeing initrd memory: 5436K (ffff880037552000 - ffff880037aa1000)
[ 0.592523] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.592527] software IO TLB [mem 0x8d915000-0x91915000] (64MB) mapped at [ffff88008d915000-ffff880091914fff]
[ 0.592831] perf: AMD NB counters detected
[ 0.592835] perf: AMD L2I counters detected
[ 0.592862] LVT offset 0 assigned for vector 0x400
[ 0.592882] perf: AMD IBS detected (0x000000ff)
[ 0.592932] Scanning for low memory corruption every 60 seconds
[ 0.593381] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.612146] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.614545] zbud: loaded
[ 0.614805] VFS: Disk quotas dquot_6.5.2
[ 0.614864] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.615057] msgmni has been set to 14858
[ 0.615135] Key type big_key registered
[ 0.615381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.615443] io scheduler noop registered
[ 0.615446] io scheduler deadline registered
[ 0.615494] io scheduler cfq registered (default)
[ 0.615791] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.615816] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.615869] efifb: probing for efifb
[ 0.615894] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 1984k, total 1984k
[ 0.615896] efifb: mode is 800x600x32, linelength=3328, pages=1
[ 0.615898] efifb: scrolling: redraw
[ 0.615901] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.618308] Console: switching to colour frame buffer device 100x37
[ 0.620547] fb0: EFI VGA frame buffer device
[ 0.620590] GHES: HEST is not enabled!
[ 0.620687] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.641207] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.641815] Linux agpgart interface v0.103
[ 0.641878] rtc_cmos 00:06: RTC can wake from S4
[ 0.642014] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.642044] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.642059] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.642200] TCP: cubic registered
[ 0.642361] NET: Registered protocol family 10
[ 0.642733] NET: Registered protocol family 17
[ 0.643211] registered taskstats version 1
[ 0.643636] Magic number: 6:949:787
[ 0.643741] rtc_cmos 00:06: setting system clock to 2014-07-31 13:47:40 UTC (1406814460)
[ 0.643835] PM: Hibernation image not present or could not be loaded.
[ 0.645595] Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
[ 0.645598] Write protecting the kernel read-only data: 8192k
[ 0.649786] Freeing unused kernel memory: 908K (ffff88000151d000 - ffff880001600000)
[ 0.651564] Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
[ 0.660598] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 0.662488] systemd-udevd[58]: starting version 215
[ 0.666342] [drm] Initialized drm 1.1.0 20060810
[ 0.674540] [drm] radeon kernel modesetting enabled.
[ 0.674597] checking generic (c0000000 1f0000) vs hw (c0000000 10000000)
[ 0.674600] fb: switching to radeondrmfb from EFI VGA
[ 0.674633] Console: switching to colour dummy device 80x25
[ 0.675169] [drm] initializing kernel modesetting (KABINI 0x1002:0x9830 0x1462:0x7865).
[ 0.675185] [drm] register mmio base: 0xFEB00000
[ 0.675187] [drm] register mmio size: 262144
[ 0.675194] [drm] doorbell mmio base: 0xD0000000
[ 0.675196] [drm] doorbell mmio size: 8388608
[ 0.675262] ATOM BIOS: AMD
[ 0.675332] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 0.675337] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 0.675340] [drm] Detected VRAM RAM=512M, BAR=256M
[ 0.675342] [drm] RAM width 128bits DDR
[ 0.675443] [TTM] Zone kernel: Available graphics memory: 3805092 kiB
[ 0.675446] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 0.675448] [TTM] Initializing pool allocator
[ 0.675455] [TTM] Initializing DMA pool allocator
[ 0.675489] [drm] radeon: 512M of VRAM memory ready
[ 0.675491] [drm] radeon: 1024M of GTT memory ready.
[ 0.675507] [drm] Loading KABINI Microcode
[ 0.675686] [drm] Internal thermal controller without fan control
[ 0.676814] [drm] radeon: dpm initialized
[ 0.678982] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 0.678994] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 0.692799] [drm] PCIE GART of 1024M enabled (table at 0x000000000078B000).
[ 0.692982] radeon 0000:00:01.0: WB enabled
[ 0.693007] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88003747cc00
[ 0.693011] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff88003747cc04
[ 0.693015] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff88003747cc08
[ 0.693019] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88003747cc0c
[ 0.693022] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff88003747cc10
[ 0.693935] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc900114b6c98
[ 0.694014] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0xffff88003747cc18
[ 0.694017] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0xffff88003747cc1c
[ 0.694021] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.694023] [drm] Driver supports precise vblank timestamp query.
[ 0.694056] radeon 0000:00:01.0: irq 72 for MSI/MSI-X
[ 0.694075] radeon 0000:00:01.0: radeon: using MSI.
[ 0.694110] [drm] radeon: irq initialized.
[ 0.698095] [drm] ring test on 0 succeeded in 2 usecs
[ 0.698183] [drm] ring test on 1 succeeded in 2 usecs
[ 0.698202] [drm] ring test on 2 succeeded in 2 usecs
[ 0.698423] [drm] ring test on 3 succeeded in 2 usecs
[ 0.698433] [drm] ring test on 4 succeeded in 2 usecs
[ 0.754446] [drm] ring test on 5 succeeded in 2 usecs
[ 0.774448] [drm] UVD initialized successfully.
[ 0.884437] [drm] ring test on 6 succeeded in 16 usecs
[ 0.884451] [drm] ring test on 7 succeeded in 4 usecs
[ 0.884453] [drm] VCE initialized successfully.
[ 0.885068] [drm] ib test on ring 0 succeeded in 0 usecs
[ 0.885234] [drm] ib test on ring 1 succeeded in 0 usecs
[ 0.885398] [drm] ib test on ring 2 succeeded in 0 usecs
[ 0.885568] [drm] ib test on ring 3 succeeded in 0 usecs
[ 0.885736] [drm] ib test on ring 4 succeeded in 0 usecs
[ 0.906461] [drm] ib test on ring 5 succeeded
[ 0.927296] [drm] ib test on ring 6 succeeded
[ 0.927990] [drm] ib test on ring 7 succeeded
[ 0.928503] [drm] Radeon Display Connectors
[ 0.928506] [drm] Connector 0:
[ 0.928508] [drm] DVI-D-1
[ 0.928510] [drm] HPD1
[ 0.928513] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 0.928515] [drm] Encoders:
[ 0.928517] [drm] DFP1: INTERNAL_UNIPHY
[ 0.928518] [drm] Connector 1:
[ 0.928520] [drm] HDMI-A-1
[ 0.928522] [drm] HPD2
[ 0.928524] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 0.928526] [drm] Encoders:
[ 0.928527] [drm] DFP2: INTERNAL_UNIPHY
[ 0.928529] [drm] Connector 2:
[ 0.928530] [drm] VGA-1
[ 0.928533] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[ 0.928534] [drm] Encoders:
[ 0.928536] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.001584] [drm] fb mappable at 0xC098F000
[ 1.001591] [drm] vram apper at 0xC0000000
[ 1.001592] [drm] size 9216000
[ 1.001595] [drm] fb depth is 24
[ 1.001597] [drm] pitch is 7680
[ 1.001789] fbcon: radeondrmfb (fb0) is primary device
[ 1.015610] Console: switching to colour frame buffer device 240x75
[ 1.026466] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 1.026469] radeon 0000:00:01.0: registered panic notifier
[ 1.037218] [drm] Initialized radeon 2.38.0 20080528 for 0000:00:01.0 on minor 0
[ 1.054350] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.055311] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.055349] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.063297] ACPI: bus type USB registered
[ 1.063350] usbcore: registered new interface driver usbfs
[ 1.063372] usbcore: registered new interface driver hub
[ 1.063423] SCSI subsystem initialized
[ 1.066957] usbcore: registered new device driver usb
[ 1.067000] libata version 3.00 loaded.
[ 1.067842] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.068090] ehci-pci: EHCI PCI platform driver
[ 1.068283] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.068295] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.068304] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.068316] ehci-pci 0000:00:12.2: debug port 1
[ 1.068370] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6c000
[ 1.069997] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.070168] ohci-pci: OHCI PCI platform driver
[ 1.077405] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.077741] hub 1-0:1.0: USB hub found
[ 1.077757] hub 1-0:1.0: 4 ports detected
[ 1.078166] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.078178] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.078184] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.078196] ehci-pci 0000:00:13.2: debug port 1
[ 1.078238] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6a000
[ 1.087533] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.087880] hub 2-0:1.0: USB hub found
[ 1.087895] hub 2-0:1.0: 4 ports detected
[ 1.088132] ahci 0000:00:11.0: version 3.0
[ 1.088338] ahci 0000:00:11.0: irq 73 for MSI/MSI-X
[ 1.088396] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.088401] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio
[ 1.089018] scsi0 : ahci
[ 1.089218] scsi1 : ahci
[ 1.089314] ata1: SATA max UDMA/133 abar m1024@0xfeb6e000 port 0xfeb6e100 irq 73
[ 1.089318] ata2: SATA max UDMA/133 abar m1024@0xfeb6e000 port 0xfeb6e180 irq 73
[ 1.089464] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.089475] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 1.089702] xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
[ 1.089709] xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X
[ 1.089716] xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
[ 1.089722] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
[ 1.089729] xhci_hcd 0000:00:10.0: irq 78 for MSI/MSI-X
[ 1.090109] hub 3-0:1.0: USB hub found
[ 1.090137] hub 3-0:1.0: 2 ports detected
[ 1.090301] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.090307] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[ 1.093294] hub 4-0:1.0: USB hub found
[ 1.093310] hub 4-0:1.0: 2 ports detected
[ 1.093552] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.093562] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 1.093605] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb6d000
[ 1.148390] hub 5-0:1.0: USB hub found
[ 1.148409] hub 5-0:1.0: 4 ports detected
[ 1.148768] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.148778] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 1.148812] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6b000
[ 1.205168] hub 6-0:1.0: USB hub found
[ 1.205187] hub 6-0:1.0: 4 ports detected
[ 1.573742] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.573775] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.574951] ata1.00: ATA-8: WDC WD10JUCT-63J6SY0, 01.01A01, max UDMA/133
[ 1.574955] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.575585] ata2.00: supports DRM functions and may not be fully accessible
[ 1.575651] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.575655] ata2.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB6Q, max UDMA/133
[ 1.575658] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.575828] ata2.00: supports DRM functions and may not be fully accessible
[ 1.575906] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.575911] ata2.00: configured for UDMA/133
[ 1.576181] ata1.00: configured for UDMA/133
[ 1.576405] scsi 0:0:0:0: Direct-Access ATA WDC WD10JUCT-63J 01.0 PQ: 0 ANSI: 5
[ 1.576855] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5
[ 1.581444] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.581450] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.581474] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.581582] sd 0:0:0:0: [sda] Write Protect is off
[ 1.581587] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.581638] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.581643] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.581648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.581700] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.584861] sdb: sdb1 sdb2 sdb3
[ 1.585501] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.593638] tsc: Refined TSC clocksource calibration: 2046.162 MHz
[ 1.631488] sda: sda1
[ 1.632088] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.849886] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 1.933435] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.057577] hub 2-1:1.0: USB hub found
[ 2.057627] hub 2-1:1.0: 4 ports detected
[ 2.146903] EXT4-fs (sdb3): re-mounted. Opts: data=ordered
[ 2.163090] usb 2-2: new high-speed USB device number 3 using ehci-pci
[ 2.175497] systemd-udevd[151]: starting version 215
[ 2.232625] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 2.232635] ACPI: Power Button [PWRB]
[ 2.232767] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.232771] ACPI: Power Button [PWRF]
[ 2.234403] ACPI: acpi_idle registered with cpuidle
[ 2.234963] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.238941] acpi-cpufreq: overriding BIOS provided _PSD data
[ 2.248161] wmi: Mapper loaded
[ 2.256907] MCE: In-kernel MCE decoding enabled.
[ 2.257298] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 2.257361] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 2.259327] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.259345] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.260554] EDAC MC: Ver: 3.0.0
[ 2.264519] snd_hda_intel 0000:00:01.1: irq 79 for MSI/MSI-X
[ 2.266714] r8169 0000:01:00.0: irq 80 for MSI/MSI-X
[ 2.267097] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xffffc90013640000, 44:8a:5b:8b:f0:c6, XID 0c000800 IRQ 80
[ 2.267101] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.267241] AMD64 EDAC driver v3.4.0
[ 2.267288] EDAC amd64: DRAM ECC disabled.
[ 2.267304] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 2.268201] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 2.271452] microcode: CPU0: patch_level=0x0700010b
[ 2.275863] microcode: CPU1: patch_level=0x0700010b
[ 2.275879] microcode: CPU2: patch_level=0x0700010b
[ 2.275891] microcode: CPU3: patch_level=0x0700010b
[ 2.283311] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card1/input6
[ 2.283381] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card1/input7
[ 2.283509] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 2.298087] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 2.298096] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.298100] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.298103] sound hdaudioC0D0: mono: mono_out=0x0
[ 2.298106] sound hdaudioC0D0: inputs:
[ 2.298111] sound hdaudioC0D0: Front Mic=0x19
[ 2.298114] sound hdaudioC0D0: Rear Mic=0x18
[ 2.298117] sound hdaudioC0D0: Line=0x1a
[ 2.316533] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 2.317532] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 2.317705] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 2.318150] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 2.318273] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 2.318983] AVX version of gcm_enc/dec engaged.
[ 2.319807] systemd-udevd[167]: renamed network interface eth0 to enp1s0
[ 2.332647] Adding 4194300k swap on /dev/sdb2. Priority:-1 extents:1 across:4194300k SSFS
[ 2.377567] cfg80211: Calling CRDA to update world regulatory domain
[ 2.377691] kvm: Nested Virtualization enabled
[ 2.377697] kvm: Nested Paging enabled
[ 2.409760] random: nonblocking pool is initialized
[ 2.416320] usb 5-1: new low-speed USB device number 2 using ohci-pci
[ 2.423529] rtl8192cu: Chip version 0x11
[ 2.502319] rtl8192cu: MAC address: c0:4a:00:28:cf:49
[ 2.502335] rtl8192cu: Board Type 0
[ 2.502562] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 2.502687] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 2.502995] usbcore: registered new interface driver rtl8192cu
[ 2.511541] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 2.514964] rtlwifi: wireless switch is on
[ 2.526734] systemd-udevd[153]: renamed network interface wlan0 to wlp0s19f2u2
[ 2.582246] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 2.583711] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.591041] usbcore: registered new interface driver usbhid
[ 2.591047] usbhid: USB HID core driver
[ 2.592765] Switched to clocksource tsc
[ 2.596303] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:046D:C05A.0001/input/input13
[ 2.596486] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-1/input0
[ 2.600457] mousedev: PS/2 mouse device common for all mice
[ 2.606394] systemd-journald[136]: Received request to flush runtime journal from PID 1
[ 2.637079] f71882fg: Found f71808a chip at 0xa00, revision 33
[ 2.637396] f71882fg f71882fg.2560: Fan: 1 is in duty-cycle mode
[ 2.637433] f71882fg f71882fg.2560: Fan: 2 is in duty-cycle mode
[ 2.637441] f71882fg f71882fg.2560: Auto pwm controlled by raw digital data, disabling pwm auto_point sysfs attributes for fan 2
[ 2.822580] usb 5-4: new full-speed USB device number 3 using ohci-pci
[ 3.016578] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:12.0/usb5/5-4/5-4:1.0/input/input14
[ 3.016734] usbcore: registered new interface driver xpad
[ 3.085774] usb 2-1.4: new low-speed USB device number 4 using ehci-pci
[ 3.151074] r8169 0000:01:00.0 enp1s0: link down
[ 3.151168] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 3.161987] rtl8192cu: MAC auto ON okay!
[ 3.194709] rtl8192cu: Tx queue select: 0x05
[ 3.243888] input: Cypress Cypress USB Keyboard / PS2 Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.4/2-1.4:1.0/0003:04B4:0101.0002/input/input15
[ 3.244062] hid-generic 0003:04B4:0101.0002: input,hidraw1: USB HID v1.00 Keyboard [Cypress Cypress USB Keyboard / PS2 Mouse] on usb-0000:00:13.2-1.4/input0
[ 3.277164] input: Cypress Cypress USB Keyboard / PS2 Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.4/2-1.4:1.1/0003:04B4:0101.0003/input/input16
[ 3.277435] hid-generic 0003:04B4:0101.0003: input,hidraw2: USB HID v1.00 Mouse [Cypress Cypress USB Keyboard / PS2 Mouse] on usb-0000:00:13.2-1.4/input1
[ 3.581994] IPv6: ADDRCONF(NETDEV_UP): wlp0s19f2u2: link is not ready
[ 4.520505] wlp0s19f2u2: authenticate with 20:aa:4b:55:50:55
[ 4.532485] wlp0s19f2u2: send auth to 20:aa:4b:55:50:55 (try 1/3)
[ 4.562603] wlp0s19f2u2: authenticated
[ 4.562883] rtl8192cu 2-2:1.0 wlp0s19f2u2: disabling HT as WMM/QoS is not supported by the AP
[ 4.562887] rtl8192cu 2-2:1.0 wlp0s19f2u2: disabling VHT as WMM/QoS is not supported by the AP
[ 4.564297] wlp0s19f2u2: associate with 20:aa:4b:55:50:55 (try 1/3)
[ 4.569350] wlp0s19f2u2: RX AssocResp from 20:aa:4b:55:50:55 (capab=0x411 status=0 aid=3)
[ 4.569419] wlp0s19f2u2: associated
[ 4.569491] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s19f2u2: link becomes ready
[ 11.081330] fuse init (API version 7.23)
I'll test things out for now, and if the problem doesn't happen with a full week use then it is solved.
Thanks a lot. -
[SOLVED] ATI HD5650M + radeon +opengl=crash
Hi to everyone,
as the title says i'm having some strange problems with my ATI HD 5650M using the radeon open source drivers.
The problem arises randomly when i try to use the opengl hardware acceleration and also when using vdapau.
The screen sunddently freeze and strange artifacts covers the screen as you can see in the picture below:
Then sometimes it gets back to normal while the most of the times it crashes and i need to force shutdown pressing the power button.
I've tried everything i could found in the web but nothing seems to work and so i'm here asking your help
I'm also developing a program for my lab course that requires opengl so testing it on my machine is getting me crazy!!
Now the part with some info for you:
Here my dmesg during a crash
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.16.7-1-ck (squishy@ease) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Oct 30 16:07:00 EDT 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-ck root=UUID=3b9221a9-e8e4-4c80-aec1-9a6caf2039c0 rw resume=/dev/disk/by-uuid/d1a44ec6-0769-448d-8728-97c8007c4495
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf27bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf27c000-0x00000000bf281fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf282000-0x00000000bf3e3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf3e4000-0x00000000bf40efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf40f000-0x00000000bf46efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf46f000-0x00000000bf46ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf470000-0x00000000bf4f0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf4f1000-0x00000000bf70efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf70f000-0x00000000bf716fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf717000-0x00000000bf71efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf71f000-0x00000000bf77cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf77d000-0x00000000bf79efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf79f000-0x00000000bf7defff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf7df000-0x00000000bf7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f060a000-0x00000000f060afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000023bffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Acer Aspire 5740 /Aspire 5740 , BIOS V1.28 08/12/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 200000000 mask FC0000000 write-back
[ 0.000000] 5 base 23C000000 mask FFC000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f6c30-0x000f6c3f] mapped at [ffff8800000f6c30]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b03000, 0x01b03fff] PGTABLE
[ 0.000000] BRK [0x01b04000, 0x01b04fff] PGTABLE
[ 0.000000] BRK [0x01b05000, 0x01b05fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23be00000-0x23bffffff]
[ 0.000000] [mem 0x23be00000-0x23bffffff] page 2M
[ 0.000000] BRK [0x01b06000, 0x01b06fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x238000000-0x23bdfffff]
[ 0.000000] [mem 0x238000000-0x23bdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x237ffffff]
[ 0.000000] [mem 0x200000000-0x237ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf27bfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf1fffff] page 2M
[ 0.000000] [mem 0xbf200000-0xbf27bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf282000-0xbf3e3fff]
[ 0.000000] [mem 0xbf282000-0xbf3e3fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf40f000-0xbf46efff]
[ 0.000000] [mem 0xbf40f000-0xbf46efff] page 4k
[ 0.000000] BRK [0x01b07000, 0x01b07fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf70f000-0xbf716fff]
[ 0.000000] [mem 0xbf70f000-0xbf716fff] page 4k
[ 0.000000] BRK [0x01b08000, 0x01b08fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf71f000-0xbf77cfff]
[ 0.000000] [mem 0xbf71f000-0xbf77cfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf79f000-0xbf7defff]
[ 0.000000] [mem 0xbf79f000-0xbf7defff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf7ff000-0xbf7fffff]
[ 0.000000] [mem 0xbf7ff000-0xbf7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x37600000-0x37af7fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6AC0 000024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 0x00000000BF7F11E0 00005C (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
[ 0.000000] ACPI: FACP 0x00000000BF7E1000 0000F4 (v03 INTEL CALPELLA 06040000 PTEC 00000001)
[ 0.000000] ACPI: DSDT 0x00000000BF7E2000 00D98E (v02 Intel CALPELLA 06040000 INTL 20060912)
[ 0.000000] ACPI: FACS 0x00000000BF79AFC0 000040
[ 0.000000] ACPI: HPET 0x00000000BF7FED6A 000038 (v01 INTEL CALPELLA 06040000 PTEC 00000001)
[ 0.000000] ACPI: MCFG 0x00000000BF7FEDA2 00003C (v01 INTEL CALPELLA 06040000 PTEC 00000001)
[ 0.000000] ACPI: SLIC 0x00000000BF7FEDDE 000176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
[ 0.000000] ACPI: APIC 0x00000000BF7FEF54 000084 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000BF7FEFD8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BF7E0000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880233600000-ffff88023b5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23bffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009bfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf27bfff]
[ 0.000000] node 0: [mem 0xbf282000-0xbf3e3fff]
[ 0.000000] node 0: [mem 0xbf40f000-0xbf46efff]
[ 0.000000] node 0: [mem 0xbf70f000-0xbf716fff]
[ 0.000000] node 0: [mem 0xbf71f000-0xbf77cfff]
[ 0.000000] node 0: [mem 0xbf79f000-0xbf7defff]
[ 0.000000] node 0: [mem 0xbf7ff000-0xbf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
[ 0.000000] node 0: [mem 0x200000000-0x23bffffff]
[ 0.000000] On node 0 totalpages: 2061440
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12180 pages used for memmap
[ 0.000000] DMA32 zone: 779493 pages, LIFO batch:31
[ 0.000000] Normal zone: 20224 pages used for memmap
[ 0.000000] Normal zone: 1277952 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf27c000-0xbf281fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf3e4000-0xbf40efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf46f000-0xbf46ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf470000-0xbf4f0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf4f1000-0xbf70efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf717000-0xbf71efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf77d000-0xbf79efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7df000-0xbf7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf0609fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf060a000-0xf060afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf060b000-0xfeafefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023bc00000 s84288 r8192 d22208 u524288
[ 0.000000] pcpu-alloc: s84288 r8192 d22208 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2028951
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-ck root=UUID=3b9221a9-e8e4-4c80-aec1-9a6caf2039c0 rw resume=/dev/disk/by-uuid/d1a44ec6-0769-448d-8728-97c8007c4495
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8019148K/8245760K available (5202K kernel code, 816K rwdata, 1672K rodata, 1092K init, 1144K bss, 226612K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2261.069 MHz processor
[ 0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.13 BogoMIPS (lpj=2261069)
[ 0.000039] pid_max: default: 32768 minimum: 301
[ 0.000049] ACPI: Core revision 20140424
[ 0.009370] ACPI: All ACPI Tables successfully acquired
[ 0.017781] Security Framework initialized
[ 0.017790] Yama: becoming mindful.
[ 0.017804] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.017806] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018028] Initializing cgroup subsys memory
[ 0.018045] Initializing cgroup subsys devices
[ 0.018051] Initializing cgroup subsys freezer
[ 0.018054] Initializing cgroup subsys net_cls
[ 0.018059] Initializing cgroup subsys blkio
[ 0.018063] Initializing cgroup subsys bfqio
[ 0.018089] CPU: Physical Processor ID: 0
[ 0.018091] CPU: Processor Core ID: 0
[ 0.018096] mce: CPU supports 9 MCE banks
[ 0.018107] CPU0: Thermal monitoring enabled (TM1)
[ 0.018118] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 6
[ 0.018219] Freeing SMP alternatives memory: 16K (ffffffff819df000 - ffffffff819e3000)
[ 0.019179] ftrace: allocating 20136 entries in 79 pages
[ 0.029999] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.040006] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz (fam: 06, model: 25, stepping: 02)
[ 0.141210] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.141229] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.141232] ... version: 3
[ 0.141233] ... bit width: 48
[ 0.141234] ... generic registers: 4
[ 0.141235] ... value mask: 0000ffffffffffff
[ 0.141236] ... max period: 000000007fffffff
[ 0.141236] ... fixed-purpose events: 3
[ 0.141238] ... event mask: 000000070000000f
[ 0.147264] x86: Booting SMP configuration:
[ 0.147267] .... node #0, CPUs: #1
[ 0.160573] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.160683] #2 #3
[ 0.187304] x86: Booted up 1 node, 4 CPUs
[ 0.187310] smpboot: Total of 4 processors activated (18088.55 BogoMIPS)
[ 0.189788] LOCALITY CPU 0 to 1: 2
[ 0.189792] LOCALITY CPU 0 to 2: 1
[ 0.189793] LOCALITY CPU 0 to 3: 2
[ 0.189794] LOCALITY CPU 1 to 2: 2
[ 0.189795] LOCALITY CPU 1 to 3: 1
[ 0.189796] LOCALITY CPU 2 to 3: 2
[ 0.189937] devtmpfs: initialized
[ 0.194030] PM: Registering ACPI NVS region [mem 0xbf470000-0xbf4f0fff] (528384 bytes)
[ 0.194039] PM: Registering ACPI NVS region [mem 0xbf77d000-0xbf79efff] (139264 bytes)
[ 0.195058] pinctrl core: initialized pinctrl subsystem
[ 0.195099] RTC time: 7:55:35, date: 11/08/14
[ 0.195151] NET: Registered protocol family 16
[ 0.195260] cpuidle: using governor ladder
[ 0.195263] cpuidle: using governor menu
[ 0.195291] ACPI: bus type PCI registered
[ 0.195293] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.195370] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.195374] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.195879] PCI: Using configuration type 1 for base access
[ 0.195980] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.195982] mtrr: probably your BIOS does not setup all CPUs.
[ 0.195982] mtrr: corrected configuration.
[ 0.199625] ACPI: Added _OSI(Module Device)
[ 0.199627] ACPI: Added _OSI(Processor Device)
[ 0.199628] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.199630] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.206704] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.206973] ACPI: Dynamic OEM Table Load:
[ 0.206979] ACPI: SSDT 0xFFFF8802307A6C00 0003AE (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.207441] ACPI: Dynamic OEM Table Load:
[ 0.207447] ACPI: SSDT 0xFFFF880230653000 000891 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.215777] ACPI: Dynamic OEM Table Load:
[ 0.215782] ACPI: SSDT 0xFFFF8802307A7400 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.219651] ACPI: Dynamic OEM Table Load:
[ 0.219655] ACPI: SSDT 0xFFFF88023007AE00 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.242420] ACPI: Interpreter enabled
[ 0.242427] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.242432] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.242447] ACPI: (supports S0 S3 S4 S5)
[ 0.242448] ACPI: Using IOAPIC for interrupt routing
[ 0.242479] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.254199] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.254205] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.254238] \_SB_.PCI0:_OSC invalid UUID
[ 0.254239] _OSC request data:1 1f 0
[ 0.254242] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.254969] PCI host bridge to bus 0000:00
[ 0.254972] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.254974] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.254976] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.254978] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.254980] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.254981] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.254983] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff]
[ 0.254991] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.255009] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.255088] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.255123] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.255219] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.255247] pci 0000:00:16.0: reg 0x10: [mem 0xf0604000-0xf060400f 64bit]
[ 0.255336] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.255426] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.255445] pci 0000:00:1a.0: reg 0x10: [mem 0xf0606000-0xf06063ff]
[ 0.255528] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.255590] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.255633] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.255648] pci 0000:00:1b.0: reg 0x10: [mem 0xf0600000-0xf0603fff 64bit]
[ 0.255713] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.255761] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.255797] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.255860] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.255907] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.255945] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.256008] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.256097] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.256117] pci 0000:00:1d.0: reg 0x10: [mem 0xf0607000-0xf06073ff]
[ 0.256197] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.256256] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.256293] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.256376] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.256415] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 0.256585] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 0.256602] pci 0000:00:1f.2: reg 0x10: [io 0x1830-0x1837]
[ 0.256609] pci 0000:00:1f.2: reg 0x14: [io 0x1824-0x1827]
[ 0.256616] pci 0000:00:1f.2: reg 0x18: [io 0x1828-0x182f]
[ 0.256623] pci 0000:00:1f.2: reg 0x1c: [io 0x1820-0x1823]
[ 0.256630] pci 0000:00:1f.2: reg 0x20: [io 0x1800-0x181f]
[ 0.256637] pci 0000:00:1f.2: reg 0x24: [mem 0xf0608000-0xf06087ff]
[ 0.256677] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.256753] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.256767] pci 0000:00:1f.3: reg 0x10: [mem 0xf0609000-0xf06090ff 64bit]
[ 0.256785] pci 0000:00:1f.3: reg 0x20: [io 0x1840-0x185f]
[ 0.256872] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.256893] pci 0000:00:1f.6: reg 0x10: [mem 0xf060a000-0xf060afff 64bit]
[ 0.257066] pci 0000:02:00.0: [1002:68c1] type 00 class 0x030000
[ 0.257079] pci 0000:02:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.257089] pci 0000:02:00.0: reg 0x18: [mem 0xcfee0000-0xcfefffff 64bit]
[ 0.257096] pci 0000:02:00.0: reg 0x20: [io 0x2000-0x20ff]
[ 0.257107] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.257137] pci 0000:02:00.0: supports D1 D2
[ 0.257181] pci 0000:02:00.1: [1002:aa60] type 00 class 0x040300
[ 0.257194] pci 0000:02:00.1: reg 0x10: [mem 0xcfedc000-0xcfedffff 64bit]
[ 0.257247] pci 0000:02:00.1: supports D1 D2
[ 0.257301] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 0.257303] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.257306] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.257309] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.257415] pci 0000:03:00.0: [14e4:1692] type 00 class 0x020000
[ 0.257440] pci 0000:03:00.0: reg 0x10: [mem 0xf0200000-0xf020ffff 64bit]
[ 0.257577] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.257609] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.259572] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 0.259578] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.259584] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.259592] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.259688] pci 0000:05:00.0: [168c:002a] type 00 class 0x028000
[ 0.259712] pci 0000:05:00.0: reg 0x10: [mem 0xf0300000-0xf030ffff 64bit]
[ 0.259832] pci 0000:05:00.0: supports D1
[ 0.259834] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
[ 0.259890] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.259898] pci 0000:00:1c.1: PCI bridge to [bus 05]
[ 0.259903] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.259970] pci 0000:00:1e.0: PCI bridge to [bus 0f] (subtractive decode)
[ 0.259979] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.259980] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.259982] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.259984] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.259986] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.259987] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
[ 0.260037] pci_bus 0000:00: on NUMA node 0
[ 0.260478] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.260530] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.260578] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.260625] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.260671] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.260718] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.260765] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.260812] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.260854] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.260858] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.260862] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.260924] PCI host bridge to bus 0000:ff
[ 0.260927] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.260932] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.260976] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.261022] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.261063] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.261104] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.261144] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.261193] pci_bus 0000:ff: on NUMA node 0
[ 0.261305] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.261347] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.261458] vgaarb: setting as boot device: PCI:0000:02:00.0
[ 0.261460] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.261462] vgaarb: loaded
[ 0.261463] vgaarb: bridge control possible 0000:02:00.0
[ 0.261508] PCI: Using ACPI for IRQ routing
[ 0.267053] PCI: pci_cache_line_size set to 64 bytes
[ 0.267127] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[ 0.267129] e820: reserve RAM buffer [mem 0xbf27c000-0xbfffffff]
[ 0.267131] e820: reserve RAM buffer [mem 0xbf3e4000-0xbfffffff]
[ 0.267132] e820: reserve RAM buffer [mem 0xbf46f000-0xbfffffff]
[ 0.267134] e820: reserve RAM buffer [mem 0xbf717000-0xbfffffff]
[ 0.267136] e820: reserve RAM buffer [mem 0xbf77d000-0xbfffffff]
[ 0.267137] e820: reserve RAM buffer [mem 0xbf7df000-0xbfffffff]
[ 0.267139] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.267254] NetLabel: Initializing
[ 0.267256] NetLabel: domain hash size = 128
[ 0.267257] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.267271] NetLabel: unlabeled traffic allowed by default
[ 0.267300] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.267306] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.269344] Switched to clocksource hpet
[ 0.274242] pnp: PnP ACPI init
[ 0.274264] ACPI: bus type PNP registered
[ 0.274454] system 00:00: [io 0x0500-0x050f] has been reserved
[ 0.274457] system 00:00: [io 0xffff] has been reserved
[ 0.274459] system 00:00: [io 0xffff] has been reserved
[ 0.274461] system 00:00: [io 0x0400-0x047f] could not be reserved
[ 0.274463] system 00:00: [io 0x1180-0x11ff] has been reserved
[ 0.274465] system 00:00: [io 0xfe00] has been reserved
[ 0.274469] system 00:00: [mem 0xff800000-0xff800fff] has been reserved
[ 0.274473] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.274520] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.274592] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.274622] pnp 00:03: Plug and Play ACPI device, IDs SYN0302 SYN0300 SYN0002 PNP0f13 (active)
[ 0.274938] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.274941] system 00:04: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.274943] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.274944] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.274946] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.274948] system 00:04: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.274950] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.274952] system 00:04: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.274954] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.274956] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.274959] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.274961] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.275076] pnp: PnP ACPI: found 5 devices
[ 0.275077] ACPI: bus type PNP unregistered
[ 0.281048] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
[ 0.281052] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
[ 0.281062] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.281064] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.281072] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.281075] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.281079] pci 0000:02:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[ 0.281081] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 0.281083] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.281086] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.281089] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.281093] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 0.281095] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.281099] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.281103] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.281107] pci 0000:00:1c.1: PCI bridge to [bus 05]
[ 0.281110] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.281114] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.281117] pci 0000:00:1c.1: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.281122] pci 0000:00:1e.0: PCI bridge to [bus 0f]
[ 0.281132] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.281134] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.281136] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.281137] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.281139] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.281141] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfeafffff]
[ 0.281143] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.281144] pci_bus 0000:02: resource 1 [mem 0xcfe00000-0xcfefffff]
[ 0.281146] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.281148] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.281150] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.281152] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.281154] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.281155] pci_bus 0000:05: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.281157] pci_bus 0000:05: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.281160] pci_bus 0000:0f: resource 4 [io 0x0000-0x0cf7]
[ 0.281161] pci_bus 0000:0f: resource 5 [io 0x0d00-0xffff]
[ 0.281163] pci_bus 0000:0f: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.281165] pci_bus 0000:0f: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.281166] pci_bus 0000:0f: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.281168] pci_bus 0000:0f: resource 9 [mem 0xc0000000-0xfeafffff]
[ 0.281198] NET: Registered protocol family 2
[ 0.281388] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.281555] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.281853] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.281888] TCP: reno registered
[ 0.281891] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.281946] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.282053] NET: Registered protocol family 1
[ 0.282526] pci 0000:02:00.0: Video device with shadowed ROM
[ 0.282572] PCI: CLS 64 bytes, default 64
[ 0.282629] Unpacking initramfs...
[ 0.374806] Freeing initrd memory: 5088K (ffff880037600000 - ffff880037af8000)
[ 0.374821] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.374824] software IO TLB [mem 0xbb27c000-0xbf27c000] (64MB) mapped at [ffff8800bb27c000-ffff8800bf27bfff]
[ 0.374864] Simple Boot Flag at 0x3e set to 0x1
[ 0.375086] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
[ 0.375092] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9
[ 0.375098] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9
[ 0.375105] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9
[ 0.375161] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.375192] Scanning for low memory corruption every 60 seconds
[ 0.375449] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.375776] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.377044] zbud: loaded
[ 0.377184] VFS: Disk quotas dquot_6.5.2
[ 0.377219] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.377326] msgmni has been set to 15672
[ 0.377385] Key type big_key registered
[ 0.377504] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.377547] io scheduler noop registered
[ 0.377550] io scheduler deadline registered
[ 0.377597] io scheduler cfq registered (default)
[ 0.377622] io scheduler bfq registered
[ 0.377623] BFQ I/O-scheduler version: v7r6
[ 0.377858] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.378176] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.378192] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.378226] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.378227] vesafb: scrolling: redraw
[ 0.378229] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.378248] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010100000, using 3072k, total 3072k
[ 0.482709] Console: switching to colour frame buffer device 128x48
[ 0.586740] fb0: VESA VGA frame buffer device
[ 0.586760] intel_idle: MWAIT substates: 0x1120
[ 0.586761] intel_idle: v0.4 model 0x25
[ 0.586762] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.586940] GHES: HEST is not enabled!
[ 0.586998] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.587352] Linux agpgart interface v0.103
[ 0.587401] rtc_cmos 00:01: RTC can wake from S4
[ 0.587536] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.587573] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.587599] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.587746] TCP: cubic registered
[ 0.587835] NET: Registered protocol family 10
[ 0.588022] NET: Registered protocol family 17
[ 0.588374] registered taskstats version 1
[ 0.588753] Magic number: 6:263:925
[ 0.588880] rtc_cmos 00:01: setting system clock to 2014-11-08 07:55:36 UTC (1415433336)
[ 0.589058] PM: Checking hibernation image partition /dev/disk/by-uuid/d1a44ec6-0769-448d-8728-97c8007c4495
[ 0.589063] PM: Hibernation image not present or could not be loaded.
[ 0.591312] Freeing unused kernel memory: 1092K (ffffffff818ce000 - ffffffff819df000)
[ 0.591315] Write protecting the kernel read-only data: 8192k
[ 0.596295] Freeing unused kernel memory: 932K (ffff880001517000 - ffff880001600000)
[ 0.598285] Freeing unused kernel memory: 376K (ffff8800017a2000 - ffff880001800000)
[ 0.598288] BFS CPU scheduler v0.456 by Con Kolivas.
[ 0.608103] random: systemd-tmpfile urandom read with 6 bits of entropy available
[ 0.609633] systemd-udevd[59]: starting version 216
[ 0.613398] [drm] Initialized drm 1.1.0 20060810
[ 0.620071] [drm] radeon kernel modesetting enabled.
[ 0.620126] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 0.620128] fb: switching to radeondrmfb from VESA VGA
[ 0.620155] Console: switching to colour dummy device 80x25
[ 0.620480] [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68C1 0x1025:0x033E).
[ 0.620492] [drm] register mmio base: 0xCFEE0000
[ 0.620493] [drm] register mmio size: 131072
[ 0.620544] ATOM BIOS: Acer
[ 0.620621] radeon 0000:02:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 0.620624] radeon 0000:02:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 0.620627] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 0.620628] [drm] RAM width 128bits DDR
[ 0.620691] [TTM] Zone kernel: Available graphics memory: 4013326 kiB
[ 0.620694] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 0.620695] [TTM] Initializing pool allocator
[ 0.620700] [TTM] Initializing DMA pool allocator
[ 0.620722] [drm] radeon: 1024M of VRAM memory ready
[ 0.620723] [drm] radeon: 1024M of GTT memory ready.
[ 0.620735] [drm] Loading REDWOOD Microcode
[ 0.620806] [drm] Internal thermal controller without fan control
[ 0.651503] [drm] radeon: dpm initialized
[ 0.651616] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 0.666335] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[ 0.666503] radeon 0000:02:00.0: WB enabled
[ 0.666510] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88003763dc00
[ 0.666514] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88003763dc0c
[ 0.667262] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9001071c418
[ 0.667267] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.667268] [drm] Driver supports precise vblank timestamp query.
[ 0.667299] radeon 0000:02:00.0: irq 41 for MSI/MSI-X
[ 0.667320] radeon 0000:02:00.0: radeon: using MSI.
[ 0.667355] [drm] radeon: irq initialized.
[ 0.684733] [drm] ring test on 0 succeeded in 1 usecs
[ 0.684743] [drm] ring test on 3 succeeded in 1 usecs
[ 0.872543] [drm] ring test on 5 succeeded in 1 usecs
[ 0.872549] [drm] UVD initialized successfully.
[ 0.872936] [drm] ib test on ring 0 succeeded in 0 usecs
[ 0.872972] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.024891] [drm] ib test on ring 5 succeeded
[ 1.080683] [drm] radeon atom DIG backlight initialized
[ 1.080690] [drm] Radeon Display Connectors
[ 1.080692] [drm] Connector 0:
[ 1.080693] [drm] LVDS-1
[ 1.080696] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 1.080698] [drm] Encoders:
[ 1.080699] [drm] LCD1: INTERNAL_UNIPHY
[ 1.080701] [drm] Connector 1:
[ 1.080703] [drm] HDMI-A-1
[ 1.080704] [drm] HPD1
[ 1.080707] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 1.080708] [drm] Encoders:
[ 1.080710] [drm] DFP1: INTERNAL_UNIPHY1
[ 1.080711] [drm] Connector 2:
[ 1.080712] [drm] VGA-1
[ 1.080715] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 1.080716] [drm] Encoders:
[ 1.080718] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.377666] tsc: Refined TSC clocksource calibration: 2260.984 MHz
[ 1.570598] [drm] fb mappable at 0xD045E000
[ 1.570602] [drm] vram apper at 0xD0000000
[ 1.570604] [drm] size 8294400
[ 1.570606] [drm] fb depth is 24
[ 1.570608] [drm] pitch is 7680
[ 1.570734] fbcon: radeondrmfb (fb0) is primary device
[ 2.084181] Console: switching to colour frame buffer device 170x48
[ 2.090108] radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
[ 2.090111] radeon 0000:02:00.0: registered panic notifier
[ 2.097303] [drm] Initialized radeon 2.39.0 20080528 for 0000:02:00.0 on minor 0
[ 2.111905] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.121491] ACPI: bus type USB registered
[ 2.121527] usbcore: registered new interface driver usbfs
[ 2.121540] usbcore: registered new interface driver hub
[ 2.121588] usbcore: registered new device driver usb
[ 2.131071] SCSI subsystem initialized
[ 2.131270] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.131543] ehci-pci: EHCI PCI platform driver
[ 2.131829] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.131840] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.131858] ehci-pci 0000:00:1a.0: debug port 2
[ 2.135898] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.135918] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0606000
[ 2.137959] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.138009] libata version 3.00 loaded.
[ 2.138016] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.141789] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.142041] hub 1-0:1.0: USB hub found
[ 2.142052] hub 1-0:1.0: 3 ports detected
[ 2.142466] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.142475] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.142489] ehci-pci 0000:00:1d.0: debug port 2
[ 2.146550] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.146574] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0607000
[ 2.151776] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.152115] hub 2-0:1.0: USB hub found
[ 2.152154] hub 2-0:1.0: 3 ports detected
[ 2.152530] ahci 0000:00:1f.2: version 3.0
[ 2.152730] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 2.152771] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.152797] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x11 impl SATA mode
[ 2.152802] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 2.155366] scsi0 : ahci
[ 2.155628] scsi1 : ahci
[ 2.155718] scsi2 : ahci
[ 2.155800] scsi3 : ahci
[ 2.155878] scsi4 : ahci
[ 2.155932] ata1: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608100 irq 42
[ 2.155934] ata2: DUMMY
[ 2.155935] ata3: DUMMY
[ 2.155936] ata4: DUMMY
[ 2.155938] ata5: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608300 irq 42
[ 2.173860] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.377985] Switched to clocksource tsc
[ 2.443911] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.460913] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.462943] ata1.00: supports DRM functions and may not be fully accessible
[ 2.463145] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.463150] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0CB6Q, max UDMA/133
[ 2.463154] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.463463] ata1.00: supports DRM functions and may not be fully accessible
[ 2.463584] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.463592] ata1.00: configured for UDMA/133
[ 2.463734] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 CB6Q PQ: 0 ANSI: 5
[ 2.558775] hub 1-1:1.0: USB hub found
[ 2.559024] hub 1-1:1.0: 6 ports detected
[ 2.661922] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.768962] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.770208] ata5.00: ATA-8: Hitachi HTS545050B9A300, PB4OC60F, max UDMA/133
[ 2.770214] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.771699] ata5.00: configured for UDMA/133
[ 2.771869] scsi 4:0:0:0: Direct-Access ATA Hitachi HTS54505 C60F PQ: 0 ANSI: 5
[ 2.776605] hub 2-1:1.0: USB hub found
[ 2.776725] hub 2-1:1.0: 8 ports detected
[ 2.776740] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.776748] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.776800] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.776803] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.776818] sd 0:0:0:0: [sda] Write Protect is off
[ 2.776822] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.776831] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.776850] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.778960] sda: sda1 sda2 sda3
[ 2.779302] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.843363] sdb: sdb1 sdb2 sdb3 < sdb5 > sdb4
[ 2.844017] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2.851179] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[ 2.944768] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.948396] usbcore: registered new interface driver usbhid
[ 2.948400] usbhid: USB HID core driver
[ 3.016214] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 3.105391] usb-storage 1-1.6:1.0: USB Mass Storage device detected
[ 3.105537] scsi5 : usb-storage 1-1.6:1.0
[ 3.105642] usbcore: registered new interface driver usb-storage
[ 3.105978] usbcore: registered new interface driver uas
[ 3.167415] random: nonblocking pool is initialized
[ 3.176091] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[ 3.336173] usb 2-1.2: new high-speed USB device number 4 using ehci-pci
[ 3.358955] PM: Starting manual resume from disk
[ 3.358962] PM: Hibernation image partition 8:20 present
[ 3.358964] PM: Looking for hibernation image.
[ 3.388020] PM: Image not found (code -22)
[ 3.388024] PM: Hibernation image not present or could not be loaded.
[ 3.425059] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[ 3.425137] scsi6 : usb-storage 2-1.2:1.0
[ 3.498343] usb 2-1.3: new low-speed USB device number 5 using ehci-pci
[ 3.571192] EXT4-fs (sda1): 4 orphan inodes deleted
[ 3.571195] EXT4-fs (sda1): recovery complete
[ 3.614431] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.668179] usb 2-1.5: new high-speed USB device number 6 using ehci-pci
[ 3.827582] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
[ 3.827727] systemd[1]: Detected architecture 'x86-64'.
[ 3.832164] systemd[1]: Set hostname to <archlinux>.
[ 3.962087] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.962204] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.962224] systemd[1]: Starting Login Prompts.
[ 3.962513] systemd[1]: Reached target Login Prompts.
[ 3.962531] systemd[1]: Starting Remote File Systems.
[ 3.962696] systemd[1]: Reached target Remote File Systems.
[ 3.962750] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.963065] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.963098] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.963152] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.963176] systemd[1]: Starting Paths.
[ 3.963331] systemd[1]: Reached target Paths.
[ 3.963347] systemd[1]: Starting Encrypted Volumes.
[ 3.963502] systemd[1]: Reached target Encrypted Volumes.
[ 3.963521] systemd[1]: Expecting device dev-disk-by\x2duuid-d1a44ec6\x2d0769\x2d448d\x2d8728\x2d97c8007c4495.device...
[ 3.963700] systemd[1]: Expecting device dev-disk-by\x2duuid-01CE38463698E8E0.device...
[ 3.963848] systemd[1]: Starting Root Slice.
[ 3.972625] systemd[1]: Created slice Root Slice.
[ 3.972648] systemd[1]: Starting User and Session Slice.
[ 3.973010] systemd[1]: Created slice User and Session Slice.
[ 3.973029] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.973244] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.973262] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.973474] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.973491] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.973678] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.973696] systemd[1]: Starting Journal Socket (/dev/log).
[ 3.973904] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.973922] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.974116] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.974142] systemd[1]: Starting udev Control Socket.
[ 3.974333] systemd[1]: Listening on udev Control Socket.
[ 3.974356] systemd[1]: Starting udev Kernel Socket.
[ 3.974530] systemd[1]: Listening on udev Kernel Socket.
[ 3.974553] systemd[1]: Starting Journal Socket.
[ 3.974742] systemd[1]: Listening on Journal Socket.
[ 3.974778] systemd[1]: Starting System Slice.
[ 3.975126] systemd[1]: Created slice System Slice.
[ 3.975167] systemd[1]: Started File System Check on Root Device.
[ 3.975183] systemd[1]: Starting system-getty.slice.
[ 3.975559] systemd[1]: Created slice system-getty.slice.
[ 3.975673] systemd[1]: Mounting Debug File System...
[ 3.976312] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.976768] systemd[1]: Starting Setup Virtual Console...
[ 3.977561] systemd[1]: Mounting Huge Pages File System...
[ 3.978045] systemd[1]: Starting udev Coldplug all Devices...
[ 4.000237] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.006562] systemd[1]: Starting Set Up Additional Binary Formats...
[ 4.008570] systemd[1]: Starting Load Kernel Modules...
[ 4.009069] systemd[1]: Starting Journal Service...
[ 4.009786] systemd[1]: Started Journal Service.
[ 4.029562] EXT4-fs (sda1): re-mounted. Opts: discard
[ 4.152957] systemd-udevd[183]: starting version 216
[ 4.235050] scsi 5:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
[ 4.273476] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 4.274479] ACPI: Lid Switch [LID0]
[ 4.274553] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 4.274558] ACPI: Sleep Button [SLPB]
[ 4.274626] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.274630] ACPI: Power Button [PWRF]
[ 4.279135] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.281626] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
[ 4.281636] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.281640] ACPI Warning: SystemIO range 0x00000000000011c0-0x00000000000011cf conflicts with OpRegion 0x0000000000001180-0x00000000000011e3 (\GPIO) (20140424/utaddress-258)
[ 4.281645] ACPI Warning: SystemIO range 0x00000000000011c0-0x00000000000011cf conflicts with OpRegion 0x0000000000001180-0x00000000000011df (\_SB_.PCI0.LPCB.EC0_.GPIO) (20140424/utaddress-258)
[ 4.281650] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.281652] ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011e3 (\GPIO) (20140424/utaddress-258)
[ 4.281655] ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011df (\_SB_.PCI0.LPCB.EC0_.GPIO) (20140424/utaddress-258)
[ 4.281659] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.281661] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011e3 (\GPIO) (20140424/utaddress-258)
[ 4.281666] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011df (\_SB_.PCI0.LPCB.EC0_.GPIO) (20140424/utaddress-258)
[ 4.281670] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.281672] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.289556] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[ 4.292971] wmi: Mapper loaded
[ 4.303886] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 4.311047] pps_core: LinuxPPS API ver. 1 registered
[ 4.311050] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 4.317175] PTP clock support registered
[ 4.322582] tg3.c:v3.137 (May 11, 2014)
[ 4.328857] cfg80211: Calling CRDA to update world regulatory domain
[ 4.377498] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 4.389806] libphy: tg3 mdio bus: probed
[ 4.396834] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 4.396838] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.396840] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 4.396842] sound hdaudioC0D0: mono: mono_out=0x0
[ 4.396844] sound hdaudioC0D0: dig-out=0x1e/0x0
[ 4.396845] sound hdaudioC0D0: inputs:
[ 4.396848] sound hdaudioC0D0: Internal Mic=0x19
[ 4.396850] sound hdaudioC0D0: Mic=0x18
[ 4.396851] sound hdaudioC0D0: Line=0x1a
[ 4.412678] ACPI Warning: SystemIO range 0x0000000000001840-0x000000000000185f conflicts with OpRegion 0x0000000000001840-0x000000000000184f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 4.412688] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.412700] snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
[ 4.414994] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input5
[ 4.415428] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 4.415478] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.415527] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.415638] snd_hda_intel 0000:02:00.1: irq 45 for MSI/MSI-X
[ 4.415992] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 4.419084] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:02:00.1/sound/card1/input9
[ 4.426001] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[ 4.426092] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 4.428385] scsi 6:0:0:0: Direct-Access Kingston DataTraveler 111 PMAP PQ: 0 ANSI: 4
[ 4.429480] sd 6:0:0:0: [sdd] 60532992 512-byte logical blocks: (30.9 GB/28.8 GiB)
[ 4.429864] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 4.430103] sd 6:0:0:0: [sdd] Write Protect is off
[ 4.430108] sd 6:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 4.430727] sd 6:0:0:0: [sdd] No Caching mode page found
[ 4.432294] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 4.445258] ACPI : EC: GPE storm detected(21 GPEs), transactions will use polling mode
[ 4.450499] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 00:26:2d:8f:93:07
[ 4.450505] tg3 0000:03:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=300:01)
[ 4.450509] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 4.450512] tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.455325] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 4.465405] acpi device:02: registered as cooling_device5
[ 4.489437] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input12
[ 4.529204] iTCO_vendor_support: vendor-support=0
[ 4.530767] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.530821] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[ 4.531024] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.532377] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 4.547449] ACPI: Battery Slot [BAT0] (battery present)
[ 4.576436] ACPI: AC Adapter [ADP1] (on-line)
[ 4.602468] systemd-udevd[194]: renamed network interface eth0 to enp3s0
[ 4.614148] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 4.641385] Non-volatile memory driver v1.3
[ 4.649386] acer_wmi: Function bitmap for Communication Device: 0x8
[ 4.653904] acer_wmi: Brightness must be controlled by acpi video driver
[ 4.653963] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.653967] ACPI: Thermal Zone [TZS0] (29 C)
[ 4.654182] input: Acer BMA150 accelerometer as /devices/virtual/input/input13
[ 4.701407] thermal LNXTHERM:01: registered as thermal_zone1
[ 4.701411] ACPI: Thermal Zone [TZS1] (30 C)
[ 4.851679] ath: EEPROM regdomain: 0x65
[ 4.851682] ath: EEPROM indicates we should expect a direct regpair map
[ 4.851685] ath: Country alpha2 being used: 00
[ 4.851686] ath: Regpair used: 0x65
[ 4.856714] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.856933] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90010540000, irq=17
[ 4.905538] fuse init (API version 7.23)
[ 4.930297] wl: module license 'Mixed/Proprietary' taints kernel.
[ 4.930303] Disabling lock debugging due to kernel taint
[ 4.947624] systemd-udevd[190]: renamed network interface wlan0 to wlp5s0
[ 5.380514] sdd: sdd1 sdd2 < sdd5 >
[ 5.383206] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 5.441719] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000, board id: 3655, fw id: 529512
[ 5.502779] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 5.504661] mousedev: PS/2 mouse device common for all mice
[ 5.636362] Adding 10050556k swap on /dev/sdb4. Priority:-1 extents:1 across:10050556k FS
[ 5.731902] systemd-journald[155]: Received request to flush runtime journal from PID 1
[ 5.860594] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7
[ 5.860911] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:15A4:9016.0001/input/input14
[ 5.861050] hid-generic 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1a.0-1.2/input1
[ 5.861213] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:04D9:0499.0002/input/input15
[ 5.861339] hid-generic 0003:04D9:0499.0002: input,hidraw1: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.0-1.3/input0
[ 5.862919] media: Linux media interface: v0.10
[ 5.865860] keucr: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.866902] usbcore: registered new interface driver eucr
[ 5.883589] Linux video capture interface: v2.00
[ 5.891794] usb 1-1.2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in cold state
[ 5.894847] usb 1-1.2: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9015.fw'
[ 5.939591] uvcvideo: Found UVC 1.00 device Video WebCam (04f2:b044)
[ 5.963814] usb 1-1.2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state
[ 5.972339] tg3 0000:03:00.0: irq 46 for MSI/MSI-X
[ 5.981802] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 5.995848] input: Video WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input16
[ 5.995950] usbcore: registered new interface driver uvcvideo
[ 5.995953] USB Video Class driver (1.1.1)
[ 6.075666] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[ 6.362841] usb 1-1.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 6.362879] DVB: registering new adapter (Afatech AF9015 reference design)
[ 6.367148] i2c i2c-8: af9013: firmware version 5.24.0.0
[ 6.369653] usb 1-1.2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)...
[ 6.374402] i2c i2c-8: tda18218: NXP TDA18218HN successfully identified
[ 6.383161] Registered IR keymap rc-empty
[ 6.383266] input: Afatech AF9015 reference design as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/rc/rc0/input17
[ 6.383324] rc0: Afatech AF9015 reference design as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/rc/rc0
[ 6.383329] usb 1-1.2: dvb_usb_v2: schedule remote query interval to 500 msecs
[ 6.383333] usb 1-1.2: dvb_usb_v2: 'Afatech AF9015 reference design' successfully initialized and connected
[ 6.383367] usbcore: registered new interface driver dvb_usb_af9015
[ 6.453680] tg3 0000:03:00.0 enp3s0: Link is down
[ 6.896383] gspca_main: v2.14.0 registered
[ 6.937159] gspca_main: gspca_zc3xx-2.14.0 probing 041e:4036
[ 7.801830] input: gspca_zc3xx as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/input/input18
[ 7.802021] usbcore: registered new interface driver gspca_zc3xx
[ 16.743574] usb 2-1.2: USB disconnect, device number 4
[ 28.699925] usb 2-1.2: new low-speed USB device number 7 using ehci-pci
[ 28.797651] input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:045E:07B9.0003/input/input19
[ 28.797866] hid-generic 0003:045E:07B9.0003: input,hidraw2: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:00:1d.0-1.2/input0
[ 53.778960] EXT4-fs (sda2): recovery complete
[ 53.778967] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 54.441664] wlp5s0: authenticate with 64:66:b3:bb:99:11
[ 54.460605] wlp5s0: send auth to 64:66:b3:bb:99:11 (try 1/3)
[ 54.465357] wlp5s0: authenticated
[ 54.466325] wlp5s0: associate with 64:66:b3:bb:99:11 (try 1/3)
[ 54.469888] wlp5s0: RX AssocResp from 64:66:b3:bb:99:11 (capab=0x411 status=0 aid=2)
[ 54.469933] wlp5s0: associated
[ 54.469959] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[ 971.775190] cfg80211: Calling CRDA to update world regulatory domain
[ 2800.542949] Watchdog[5595]: segfault at 0 ip 0000000002af460e sp 00007fe546816370 error 6 in Popcorn-Time[400000+4973000]
[ 2800.593721] radeon 0000:02:00.0: ring 0 stalled for more than 10494msec
[ 2800.593729] radeon 0000:02:00.0: GPU lockup (waiting for 0x00000000000428de last fence id 0x00000000000428dd on ring 0)
[ 2800.633783] radeon 0000:02:00.0: Saved 55 dwords of commands on ring 0.
[ 2800.633814] radeon 0000:02:00.0: GPU softreset: 0x00000008
[ 2800.633818] radeon 0000:02:00.0: GRBM_STATUS = 0xA0003828
[ 2800.633822] radeon 0000:02:00.0: GRBM_STATUS_SE0The problem is now less frequent but unfortunately is still present...
This is the dmesg of last crash:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.17.4-1-ck (squishy@ease) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT Fri Nov 21 17:13:52 EST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-ck root=UUID=3b9221a9-e8e4-4c80-aec1-9a6caf2039c0 rw resume=/dev/disk/by-uuid/d1a44ec6-0769-448d-8728-97c8007c4495
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf27bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf27c000-0x00000000bf281fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf282000-0x00000000bf3e3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf3e4000-0x00000000bf40efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf40f000-0x00000000bf46efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf46f000-0x00000000bf46ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf470000-0x00000000bf4f0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf4f1000-0x00000000bf70efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf70f000-0x00000000bf716fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf717000-0x00000000bf71efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf71f000-0x00000000bf77cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf77d000-0x00000000bf79efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf79f000-0x00000000bf7defff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf7df000-0x00000000bf7fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f060a000-0x00000000f060afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000023bffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Acer Aspire 5740 /Aspire 5740 , BIOS V1.28 08/12/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask F00000000 write-back
[ 0.000000] 4 base 200000000 mask FC0000000 write-back
[ 0.000000] 5 base 23C000000 mask FFC000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f6c30-0x000f6c3f] mapped at [ffff8800000f6c30]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b09000, 0x01b09fff] PGTABLE
[ 0.000000] BRK [0x01b0a000, 0x01b0afff] PGTABLE
[ 0.000000] BRK [0x01b0b000, 0x01b0bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23be00000-0x23bffffff]
[ 0.000000] [mem 0x23be00000-0x23bffffff] page 2M
[ 0.000000] BRK [0x01b0c000, 0x01b0cfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x238000000-0x23bdfffff]
[ 0.000000] [mem 0x238000000-0x23bdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x237ffffff]
[ 0.000000] [mem 0x200000000-0x237ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf27bfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf1fffff] page 2M
[ 0.000000] [mem 0xbf200000-0xbf27bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf282000-0xbf3e3fff]
[ 0.000000] [mem 0xbf282000-0xbf3e3fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf40f000-0xbf46efff]
[ 0.000000] [mem 0xbf40f000-0xbf46efff] page 4k
[ 0.000000] BRK [0x01b0d000, 0x01b0dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf70f000-0xbf716fff]
[ 0.000000] [mem 0xbf70f000-0xbf716fff] page 4k
[ 0.000000] BRK [0x01b0e000, 0x01b0efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf71f000-0xbf77cfff]
[ 0.000000] [mem 0xbf71f000-0xbf77cfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf79f000-0xbf7defff]
[ 0.000000] [mem 0xbf79f000-0xbf7defff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf7ff000-0xbf7fffff]
[ 0.000000] [mem 0xbf7ff000-0xbf7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[ 0.000000] [mem 0x100000000-0x1fbffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x374fe000-0x37a76fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6AC0 000024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 0x00000000BF7F11E0 00005C (v01 ACRSYS ACRPRDCT 06040000 INNA 00000000)
[ 0.000000] ACPI: FACP 0x00000000BF7E1000 0000F4 (v03 INTEL CALPELLA 06040000 PTEC 00000001)
[ 0.000000] ACPI: DSDT 0x00000000BF7E2000 00D98E (v02 Intel CALPELLA 06040000 INTL 20060912)
[ 0.000000] ACPI: FACS 0x00000000BF79AFC0 000040
[ 0.000000] ACPI: HPET 0x00000000BF7FED6A 000038 (v01 INTEL CALPELLA 06040000 PTEC 00000001)
[ 0.000000] ACPI: MCFG 0x00000000BF7FEDA2 00003C (v01 INTEL CALPELLA 06040000 PTEC 00000001)
[ 0.000000] ACPI: SLIC 0x00000000BF7FEDDE 000176 (v01 ACRSYS ACRPRDCT 06040000 ANNI 00000001)
[ 0.000000] ACPI: APIC 0x00000000BF7FEF54 000084 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000BF7FEFD8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BF7E0000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880233600000-ffff88023b5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23bffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009bfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf27bfff]
[ 0.000000] node 0: [mem 0xbf282000-0xbf3e3fff]
[ 0.000000] node 0: [mem 0xbf40f000-0xbf46efff]
[ 0.000000] node 0: [mem 0xbf70f000-0xbf716fff]
[ 0.000000] node 0: [mem 0xbf71f000-0xbf77cfff]
[ 0.000000] node 0: [mem 0xbf79f000-0xbf7defff]
[ 0.000000] node 0: [mem 0xbf7ff000-0xbf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x1fbffffff]
[ 0.000000] node 0: [mem 0x200000000-0x23bffffff]
[ 0.000000] On node 0 totalpages: 2061440
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12180 pages used for memmap
[ 0.000000] DMA32 zone: 779493 pages, LIFO batch:31
[ 0.000000] Normal zone: 20224 pages used for memmap
[ 0.000000] Normal zone: 1277952 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf27c000-0xbf281fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf3e4000-0xbf40efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf46f000-0xbf46ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf470000-0xbf4f0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf4f1000-0xbf70efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf717000-0xbf71efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf77d000-0xbf79efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7df000-0xbf7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf0609fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf060a000-0xf060afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf060b000-0xfeafefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeaff000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023bc00000 s84352 r8192 d22144 u524288
[ 0.000000] pcpu-alloc: s84352 r8192 d22144 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2028951
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-ck root=UUID=3b9221a9-e8e4-4c80-aec1-9a6caf2039c0 rw resume=/dev/disk/by-uuid/d1a44ec6-0769-448d-8728-97c8007c4495
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8018608K/8245760K available (5246K kernel code, 824K rwdata, 1692K rodata, 1100K init, 1148K bss, 227152K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:456 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2261.032 MHz processor
[ 0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.06 BogoMIPS (lpj=2261032)
[ 0.000039] pid_max: default: 32768 minimum: 301
[ 0.000049] ACPI: Core revision 20140724
[ 0.009350] ACPI: All ACPI Tables successfully acquired
[ 0.018083] Security Framework initialized
[ 0.018091] Yama: becoming mindful.
[ 0.018105] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018108] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018317] Initializing cgroup subsys memory
[ 0.018324] Initializing cgroup subsys devices
[ 0.018327] Initializing cgroup subsys freezer
[ 0.018330] Initializing cgroup subsys net_cls
[ 0.018332] Initializing cgroup subsys blkio
[ 0.018335] Initializing cgroup subsys bfqio
[ 0.018357] CPU: Physical Processor ID: 0
[ 0.018359] CPU: Processor Core ID: 0
[ 0.018364] mce: CPU supports 9 MCE banks
[ 0.018375] CPU0: Thermal monitoring enabled (TM1)
[ 0.018385] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.018474] Freeing SMP alternatives memory: 20K (ffffffff819e3000 - ffffffff819e8000)
[ 0.019449] ftrace: allocating 20321 entries in 80 pages
[ 0.030359] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.040366] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz (fam: 06, model: 25, stepping: 02)
[ 0.141998] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.142017] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.142019] ... version: 3
[ 0.142020] ... bit width: 48
[ 0.142021] ... generic registers: 4
[ 0.142022] ... value mask: 0000ffffffffffff
[ 0.142023] ... max period: 000000007fffffff
[ 0.142024] ... fixed-purpose events: 3
[ 0.142025] ... event mask: 000000070000000f
[ 0.148045] x86: Booting SMP configuration:
[ 0.148049] .... node #0, CPUs: #1
[ 0.161357] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.161457] #2 #3
[ 0.188048] x86: Booted up 1 node, 4 CPUs
[ 0.188052] smpboot: Total of 4 processors activated (18088.25 BogoMIPS)
[ 0.190525] LOCALITY CPU 0 to 1: 2
[ 0.190529] LOCALITY CPU 0 to 2: 1
[ 0.190530] LOCALITY CPU 0 to 3: 2
[ 0.190532] LOCALITY CPU 1 to 2: 2
[ 0.190533] LOCALITY CPU 1 to 3: 1
[ 0.190534] LOCALITY CPU 2 to 3: 2
[ 0.190667] devtmpfs: initialized
[ 0.193464] PM: Registering ACPI NVS region [mem 0xbf470000-0xbf4f0fff] (528384 bytes)
[ 0.193472] PM: Registering ACPI NVS region [mem 0xbf77d000-0xbf79efff] (139264 bytes)
[ 0.194523] pinctrl core: initialized pinctrl subsystem
[ 0.194572] RTC time: 18:38:12, date: 11/27/14
[ 0.194662] NET: Registered protocol family 16
[ 0.194769] cpuidle: using governor ladder
[ 0.194772] cpuidle: using governor menu
[ 0.194802] ACPI: bus type PCI registered
[ 0.194804] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.194882] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.194885] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.195395] PCI: Using configuration type 1 for base access
[ 0.195495] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.195496] mtrr: probably your BIOS does not setup all CPUs.
[ 0.195497] mtrr: corrected configuration.
[ 0.199723] ACPI: Added _OSI(Module Device)
[ 0.199725] ACPI: Added _OSI(Processor Device)
[ 0.199726] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.199728] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.207415] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.207679] ACPI: Dynamic OEM Table Load:
[ 0.207686] ACPI: SSDT 0xFFFF8802307FAC00 0003AE (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.208150] ACPI: Dynamic OEM Table Load:
[ 0.208156] ACPI: SSDT 0xFFFF880230651000 000891 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.218554] ACPI: Dynamic OEM Table Load:
[ 0.218559] ACPI: SSDT 0xFFFF8802307FB400 000303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.224433] ACPI: Dynamic OEM Table Load:
[ 0.224437] ACPI: SSDT 0xFFFF8802300A1200 000119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.248111] ACPI: Interpreter enabled
[ 0.248119] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.248124] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.248139] ACPI: (supports S0 S3 S4 S5)
[ 0.248140] ACPI: Using IOAPIC for interrupt routing
[ 0.248167] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.259529] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.259535] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.259567] \_SB_.PCI0:_OSC invalid UUID
[ 0.259568] _OSC request data:1 1f 0
[ 0.259572] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.260282] PCI host bridge to bus 0000:00
[ 0.260285] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.260287] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.260289] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.260290] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.260292] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.260294] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.260295] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff]
[ 0.260304] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.260325] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.260406] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.260441] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.260538] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.260566] pci 0000:00:16.0: reg 0x10: [mem 0xf0604000-0xf060400f 64bit]
[ 0.260655] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.260744] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.260764] pci 0000:00:1a.0: reg 0x10: [mem 0xf0606000-0xf06063ff]
[ 0.260844] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.260906] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.260947] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.260962] pci 0000:00:1b.0: reg 0x10: [mem 0xf0600000-0xf0603fff 64bit]
[ 0.261027] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.261077] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.261114] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.261178] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.261226] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.261263] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.261329] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.261419] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.261438] pci 0000:00:1d.0: reg 0x10: [mem 0xf0607000-0xf06073ff]
[ 0.261519] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.261579] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.261616] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.261698] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.261737] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 0.261905] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 0.261922] pci 0000:00:1f.2: reg 0x10: [io 0x1830-0x1837]
[ 0.261929] pci 0000:00:1f.2: reg 0x14: [io 0x1824-0x1827]
[ 0.261936] pci 0000:00:1f.2: reg 0x18: [io 0x1828-0x182f]
[ 0.261943] pci 0000:00:1f.2: reg 0x1c: [io 0x1820-0x1823]
[ 0.261950] pci 0000:00:1f.2: reg 0x20: [io 0x1800-0x181f]
[ 0.261957] pci 0000:00:1f.2: reg 0x24: [mem 0xf0608000-0xf06087ff]
[ 0.261997] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.262075] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.262089] pci 0000:00:1f.3: reg 0x10: [mem 0xf0609000-0xf06090ff 64bit]
[ 0.262108] pci 0000:00:1f.3: reg 0x20: [io 0x1840-0x185f]
[ 0.262198] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.262219] pci 0000:00:1f.6: reg 0x10: [mem 0xf060a000-0xf060afff 64bit]
[ 0.262397] pci 0000:02:00.0: [1002:68c1] type 00 class 0x030000
[ 0.262411] pci 0000:02:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.262420] pci 0000:02:00.0: reg 0x18: [mem 0xcfee0000-0xcfefffff 64bit]
[ 0.262427] pci 0000:02:00.0: reg 0x20: [io 0x2000-0x20ff]
[ 0.262439] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.262468] pci 0000:02:00.0: supports D1 D2
[ 0.262514] pci 0000:02:00.1: [1002:aa60] type 00 class 0x040300
[ 0.262528] pci 0000:02:00.1: reg 0x10: [mem 0xcfedc000-0xcfedffff 64bit]
[ 0.262581] pci 0000:02:00.1: supports D1 D2
[ 0.262632] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 0.262635] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.262637] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.262641] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.262745] pci 0000:03:00.0: [14e4:1692] type 00 class 0x020000
[ 0.262770] pci 0000:03:00.0: reg 0x10: [mem 0xf0200000-0xf020ffff 64bit]
[ 0.262903] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.262935] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.265356] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 0.265363] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.265368] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.265376] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.265467] pci 0000:05:00.0: [168c:002a] type 00 class 0x028000
[ 0.265491] pci 0000:05:00.0: reg 0x10: [mem 0xf0300000-0xf030ffff 64bit]
[ 0.265612] pci 0000:05:00.0: supports D1
[ 0.265613] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
[ 0.265670] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.265679] pci 0000:00:1c.1: PCI bridge to [bus 05]
[ 0.265683] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.265751] pci 0000:00:1e.0: PCI bridge to [bus 0f] (subtractive decode)
[ 0.265759] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.265760] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.265762] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.265764] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.265765] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.265767] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
[ 0.265817] pci_bus 0000:00: on NUMA node 0
[ 0.266260] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.266314] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.266362] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.266409] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.266456] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.266503] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.266550] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.266597] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.266639] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.266643] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.266647] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.266709] PCI host bridge to bus 0000:ff
[ 0.266711] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.266716] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.266760] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.266806] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.266847] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.266887] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.266928] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.266978] pci_bus 0000:ff: on NUMA node 0
[ 0.267090] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.267134] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.267251] vgaarb: setting as boot device: PCI:0000:02:00.0
[ 0.267253] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.267255] vgaarb: loaded
[ 0.267256] vgaarb: bridge control possible 0000:02:00.0
[ 0.267304] PCI: Using ACPI for IRQ routing
[ 0.272910] PCI: pci_cache_line_size set to 64 bytes
[ 0.272984] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[ 0.272985] e820: reserve RAM buffer [mem 0xbf27c000-0xbfffffff]
[ 0.272987] e820: reserve RAM buffer [mem 0xbf3e4000-0xbfffffff]
[ 0.272989] e820: reserve RAM buffer [mem 0xbf46f000-0xbfffffff]
[ 0.272991] e820: reserve RAM buffer [mem 0xbf717000-0xbfffffff]
[ 0.272993] e820: reserve RAM buffer [mem 0xbf77d000-0xbfffffff]
[ 0.272994] e820: reserve RAM buffer [mem 0xbf7df000-0xbfffffff]
[ 0.272996] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.273118] NetLabel: Initializing
[ 0.273119] NetLabel: domain hash size = 128
[ 0.273120] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.273134] NetLabel: unlabeled traffic allowed by default
[ 0.273161] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.273166] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.275202] Switched to clocksource hpet
[ 0.280079] pnp: PnP ACPI init
[ 0.280291] system 00:00: [io 0x0500-0x050f] has been reserved
[ 0.280294] system 00:00: [io 0xffff] has been reserved
[ 0.280296] system 00:00: [io 0xffff] has been reserved
[ 0.280298] system 00:00: [io 0x0400-0x047f] could not be reserved
[ 0.280300] system 00:00: [io 0x1180-0x11ff] has been reserved
[ 0.280302] system 00:00: [io 0xfe00] has been reserved
[ 0.280304] system 00:00: [mem 0xff800000-0xff800fff] has been reserved
[ 0.280308] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.280353] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.280423] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.280450] pnp 00:03: Plug and Play ACPI device, IDs SYN0302 SYN0300 SYN0002 PNP0f13 (active)
[ 0.280757] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.280760] system 00:04: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.280762] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.280763] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.280765] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.280767] system 00:04: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.280769] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.280771] system 00:04: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.280773] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.280775] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.280777] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.280780] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.280894] pnp: PnP ACPI: found 5 devices
[ 0.286854] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
[ 0.286857] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000
[ 0.286867] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.286869] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.286878] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.286881] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.286884] pci 0000:02:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[ 0.286886] pci 0000:00:01.0: PCI bridge to [bus 02]
[ 0.286889] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.286892] pci 0000:00:01.0: bridge window [mem 0xcfe00000-0xcfefffff]
[ 0.286894] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.286898] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 0.286900] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.286904] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.286908] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.286913] pci 0000:00:1c.1: PCI bridge to [bus 05]
[ 0.286915] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.286919] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 0.286922] pci 0000:00:1c.1: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.286927] pci 0000:00:1e.0: PCI bridge to [bus 0f]
[ 0.286937] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.286939] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.286940] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.286942] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.286944] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.286946] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfeafffff]
[ 0.286947] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.286949] pci_bus 0000:02: resource 1 [mem 0xcfe00000-0xcfefffff]
[ 0.286951] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.286953] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.286955] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.286956] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.286958] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.286960] pci_bus 0000:05: resource 1 [mem 0xf0300000-0xf03fffff]
[ 0.286961] pci_bus 0000:05: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.286964] pci_bus 0000:0f: resource 4 [io 0x0000-0x0cf7]
[ 0.286965] pci_bus 0000:0f: resource 5 [io 0x0d00-0xffff]
[ 0.286967] pci_bus 0000:0f: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.286969] pci_bus 0000:0f: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.286970] pci_bus 0000:0f: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.286972] pci_bus 0000:0f: resource 9 [mem 0xc0000000-0xfeafffff]
[ 0.287001] NET: Registered protocol family 2
[ 0.287191] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.287365] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.287664] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.287699] TCP: reno registered
[ 0.287702] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.287758] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.287864] NET: Registered protocol family 1
[ 0.288363] pci 0000:02:00.0: Video device with shadowed ROM
[ 0.288410] PCI: CLS 64 bytes, default 64
[ 0.288463] Unpacking initramfs...
[ 0.389168] Freeing initrd memory: 5604K (ffff8800374fe000 - ffff880037a77000)
[ 0.389184] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.389186] software IO TLB [mem 0xbb27c000-0xbf27c000] (64MB) mapped at [ffff8800bb27c000-ffff8800bf27bfff]
[ 0.389243] Simple Boot Flag at 0x3e set to 0x1
[ 0.389469] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
[ 0.389473] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9
[ 0.389479] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9
[ 0.389485] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9
[ 0.389542] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.389569] Scanning for low memory corruption every 60 seconds
[ 0.389801] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.389823] Initialise system trusted keyring
[ 0.390136] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.391391] zpool: loaded
[ 0.391394] zbud: loaded
[ 0.391526] VFS: Disk quotas dquot_6.5.2
[ 0.391559] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.391664] msgmni has been set to 15672
[ 0.391715] Key type big_key registered
[ 0.391828] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.391862] io scheduler noop registered
[ 0.391865] io scheduler deadline registered
[ 0.391894] io scheduler cfq registered (default)
[ 0.391918] io scheduler bfq registered
[ 0.391919] BFQ I/O-scheduler version: v7r6
[ 0.392154] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.392484] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.392502] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.392534] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.392535] vesafb: scrolling: redraw
[ 0.392537] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.392557] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010100000, using 3072k, total 3072k
[ 0.497979] Console: switching to colour frame buffer device 128x48
[ 0.603554] fb0: VESA VGA frame buffer device
[ 0.603573] intel_idle: MWAIT substates: 0x1120
[ 0.603575] intel_idle: v0.4 model 0x25
[ 0.603576] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.603751] GHES: HEST is not enabled!
[ 0.603809] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.604160] Linux agpgart interface v0.103
[ 0.604210] rtc_cmos 00:01: RTC can wake from S4
[ 0.604334] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.604373] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.604398] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.604610] TCP: cubic registered
[ 0.604789] NET: Registered protocol family 10
[ 0.605171] NET: Registered protocol family 17
[ 0.605443] Loading compiled-in X.509 certificates
[ 0.605468] registered taskstats version 1
[ 0.605851] Magic number: 6:551:646
[ 0.605981] rtc_cmos 00:01: setting system clock to 2014-11-27 18:38:13 UTC (1417113493)
[ 0.606168] PM: Checking hibernation image partition /dev/disk/by-uuid/d1a44ec6-0769-448d-8728-97c8007c4495
[ 0.606173] PM: Hibernation image not present or could not be loaded.
[ 0.607664] Freeing unused kernel memory: 1100K (ffffffff818d0000 - ffffffff819e3000)
[ 0.607667] Write protecting the kernel read-only data: 8192k
[ 0.612471] Freeing unused kernel memory: 888K (ffff880001522000 - ffff880001600000)
[ 0.614359] Freeing unused kernel memory: 356K (ffff8800017a7000 - ffff880001800000)
[ 0.614362] BFS CPU scheduler v0.458 by Con Kolivas.
[ 0.623213] random: systemd-tmpfile urandom read with 6 bits of entropy available
[ 0.630763] [drm] Initialized drm 1.1.0 20060810
[ 0.637649] [drm] radeon kernel modesetting enabled.
[ 0.637706] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 0.637707] fb: switching to radeondrmfb from VESA VGA
[ 0.637734] Console: switching to colour dummy device 80x25
[ 0.638258] [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68C1 0x1025:0x033E).
[ 0.638273] [drm] register mmio base: 0xCFEE0000
[ 0.638274] [drm] register mmio size: 131072
[ 0.638343] ATOM BIOS: Acer
[ 0.638415] radeon 0000:02:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 0.638418] radeon 0000:02:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 0.638420] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 0.638421] [drm] RAM width 128bits DDR
[ 0.638472] [TTM] Zone kernel: Available graphics memory: 4013288 kiB
[ 0.638473] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 0.638474] [TTM] Initializing pool allocator
[ 0.638479] [TTM] Initializing DMA pool allocator
[ 0.638498] [drm] radeon: 1024M of VRAM memory ready
[ 0.638499] [drm] radeon: 1024M of GTT memory ready.
[ 0.638514] [drm] Loading REDWOOD Microcode
[ 0.638583] [drm] Internal thermal controller without fan control
[ 0.676671] [drm] radeon: dpm initialized
[ 0.676789] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 0.688792] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
[ 0.688961] radeon 0000:02:00.0: WB enabled
[ 0.688967] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880037668c00
[ 0.688971] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880037668c0c
[ 0.689727] radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9001071c418
[ 0.689731] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.689733] [drm] Driver supports precise vblank timestamp query.
[ 0.689764] radeon 0000:02:00.0: irq 25 for MSI/MSI-X
[ 0.689784] radeon 0000:02:00.0: radeon: using MSI.
[ 0.689822] [drm] radeon: irq initialized.
[ 0.707233] [drm] ring test on 0 succeeded in 1 usecs
[ 0.707242] [drm] ring test on 3 succeeded in 2 usecs
[ 0.895029] [drm] ring test on 5 succeeded in 1 usecs
[ 0.895035] [drm] UVD initialized successfully.
[ 0.895428] [drm] ib test on ring 0 succeeded in 0 usecs
[ 0.895463] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.047402] [drm] ib test on ring 5 succeeded
[ 1.101542] [drm] radeon atom DIG backlight initialized
[ 1.101547] [drm] Radeon Display Connectors
[ 1.101549] [drm] Connector 0:
[ 1.101551] [drm] LVDS-1
[ 1.101554] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 1.101556] [drm] Encoders:
[ 1.101558] [drm] LCD1: INTERNAL_UNIPHY
[ 1.101560] [drm] Connector 1:
[ 1.101561] [drm] HDMI-A-1
[ 1.101563] [drm] HPD1
[ 1.101565] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 1.101566] [drm] Encoders:
[ 1.101568] [drm] DFP1: INTERNAL_UNIPHY1
[ 1.101569] [drm] Connector 2:
[ 1.101571] [drm] VGA-1
[ 1.101573] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 1.101575] [drm] Encoders:
[ 1.101577] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.391606] tsc: Refined TSC clocksource calibration: 2260.984 MHz
[ 1.558775] [drm] fb mappable at 0xD045E000
[ 1.558779] [drm] vram apper at 0xD0000000
[ 1.558782] [drm] size 4325376
[ 1.558784] [drm] fb depth is 24
[ 1.558786] [drm] pitch is 5632
[ 1.558906] fbcon: radeondrmfb (fb0) is primary device
[ 2.076169] Console: switching to colour frame buffer device 170x48
[ 2.081124] radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
[ 2.081127] radeon 0000:02:00.0: registered panic notifier
[ 2.094073] [drm] Initialized radeon 2.40.0 20080528 for 0000:02:00.0 on minor 0
[ 2.113221] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.129040] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.129183] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.129791] SCSI subsystem initialized
[ 2.130049] ACPI: bus type USB registered
[ 2.130087] usbcore: registered new interface driver usbfs
[ 2.130102] usbcore: registered new interface driver hub
[ 2.130214] usbcore: registered new device driver usb
[ 2.131024] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.131530] ehci-pci: EHCI PCI platform driver
[ 2.131815] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.131826] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.131842] ehci-pci 0000:00:1a.0: debug port 2
[ 2.135906] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.135929] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0606000
[ 2.136791] libata version 3.00 loaded.
[ 2.141639] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.141915] hub 1-0:1.0: USB hub found
[ 2.141927] hub 1-0:1.0: 3 ports detected
[ 2.142281] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.142288] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.142300] ehci-pci 0000:00:1d.0: debug port 2
[ 2.146282] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.146300] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0607000
[ 2.151634] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.151938] hub 2-0:1.0: USB hub found
[ 2.151953] hub 2-0:1.0: 3 ports detected
[ 2.152214] ahci 0000:00:1f.2: version 3.0
[ 2.152531] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[ 2.152578] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.152626] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x11 impl SATA mode
[ 2.152630] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 2.155560] scsi host0: ahci
[ 2.155740] scsi host1: ahci
[ 2.155886] scsi host2: ahci
[ 2.156047] scsi host3: ahci
[ 2.156191] scsi host4: ahci
[ 2.156282] ata1: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608100 irq 26
[ 2.156286] ata2: DUMMY
[ 2.156288] ata3: DUMMY
[ 2.156290] ata4: DUMMY
[ 2.156293] ata5: SATA max UDMA/133 abar m2048@0xf0608000 port 0xf0608300 irq 26
[ 2.168791] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.391842] Switched to clocksource tsc
[ 2.443731] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.460769] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.462833] ata1.00: supports DRM functions and may not be fully accessible
[ 2.463039] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.463044] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0CB6Q, max UDMA/133
[ 2.463047] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.463374] ata1.00: supports DRM functions and may not be fully accessible
[ 2.463515] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.463521] ata1.00: configured for UDMA/133
[ 2.463668] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 CB6Q PQ: 0 ANSI: 5
[ 2.558794] hub 1-1:1.0: USB hub found
[ 2.559149] hub 1-1:1.0: 6 ports detected
[ 2.661792] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.768836] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.770078] ata5.00: ATA-8: Hitachi HTS545050B9A300, PB4OC60F, max UDMA/133
[ 2.770084] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.771573] ata5.00: configured for UDMA/133
[ 2.771677] scsi 4:0:0:0: Direct-Access ATA Hitachi HTS54505 C60F PQ: 0 ANSI: 5
[ 2.775696] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.775700] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.775767] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.775771] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.775794] sd 0:0:0:0: [sda] Write Protect is off
[ 2.775796] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.775800] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.775820] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.776292] hub 2-1:1.0: USB hub found
[ 2.776362] hub 2-1:1.0: 8 ports detected
[ 2.777955] sda: sda1 sda2 sda3
[ 2.778352] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.840262] sdb: sdb1 sdb2 sdb3 < sdb5 > sdb4
[ 2.840794] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2.851047] usb 1-1.6: new high-speed USB device number 3 using ehci-pci
[ 2.939366] usb-storage 1-1.6:1.0: USB Mass Storage device detected
[ 2.939450] scsi host5: usb-storage 1-1.6:1.0
[ 2.939602] usbcore: registered new interface driver usb-storage
[ 2.939910] usbcore: registered new interface driver uas
[ 3.051036] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[ 3.170163] random: nonblocking pool is initialized
[ 3.355507] PM: Starting manual resume from disk
[ 3.355516] PM: Hibernation image partition 8:20 present
[ 3.355519] PM: Looking for hibernation image.
[ 3.384871] PM: Image not found (code -22)
[ 3.384875] PM: Hibernation image not present or could not be loaded.
[ 3.406911] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.661233] systemd[1]: systemd 217 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN )
[ 3.661384] systemd[1]: Detected architecture 'x86-64'.
[ 3.665784] systemd[1]: Set hostname to <archlinux>.
[ 3.831064] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.831172] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.831192] systemd[1]: Starting Login Prompts.
[ 3.831473] systemd[1]: Reached target Login Prompts.
[ 3.831492] systemd[1]: Starting Remote File Systems.
[ 3.831655] systemd[1]: Reached target Remote File Systems.
[ 3.831696] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.832024] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.832070] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.832145] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.832169] systemd[1]: Starting Paths.
[ 3.832309] systemd[1]: Reached target Paths.
[ 3.832317] systemd[1]: Starting Encrypted Volumes.
[ 3.832432] systemd[1]: Reached target Encrypted Volumes.
[ 3.832442] systemd[1]: Expecting device dev-disk-by\x2duuid-d1a44ec6\x2d0769\x2d448d\x2d8728\x2d97c8007c4495.device...
[ 3.832557] systemd[1]: Expecting device dev-disk-by\x2duuid-01CE38463698E8E0.device...
[ 3.832658] systemd[1]: Starting Root Slice.
[ 3.836668] systemd[1]: Created slice Root Slice.
[ 3.836679] systemd[1]: Starting User and Session Slice.
[ 3.836919] systemd[1]: Created slice User and Session Slice.
[ 3.836929] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.837094] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.837104] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.837265] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.837274] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.837426] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.837435] systemd[1]: Starting Journal Socket (/dev/log).
[ 3.837592] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.837601] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.837754] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.837767] systemd[1]: Starting udev Control Socket.
[ 3.837897] systemd[1]: Listening on udev Control Socket.
[ 3.837909] systemd[1]: Starting udev Kernel Socket.
[ 3.838046] systemd[1]: Listening on udev Kernel Socket.
[ 3.838058] systemd[1]: Starting Journal Socket.
[ 3.838197] systemd[1]: Listening on Journal Socket.
[ 3.838217] systemd[1]: Starting System Slice.
[ 3.838433] systemd[1]: Created slice System Slice.
[ 3.838448] systemd[1]: Starting system-getty.slice.
[ 3.838669] systemd[1]: Created slice system-getty.slice.
[ 3.838683] systemd[1]: Started File System Check on Root Device.
[ 3.838743] systemd[1]: Mounting Debug File System...
[ 3.839156] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.839546] systemd[1]: Starting Setup Virtual Console...
[ 3.840260] systemd[1]: Mounting Huge Pages File System...
[ 3.840813] systemd[1]: Starting udev Coldplug all Devices...
[ 3.860817] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.867507] systemd[1]: Starting Set Up Additional Binary Formats...
[ 3.869906] systemd[1]: Starting Load Kernel Modules...
[ 3.870513] systemd[1]: Starting Journal Service...
[ 3.871106] systemd[1]: Starting Slices.
[ 3.871566] systemd[1]: Reached target Slices.
[ 3.871607] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.873426] systemd[1]: Mounted Huge Pages File System.
[ 3.873556] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.873652] systemd[1]: Mounted Debug File System.
[ 3.874608] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 3.875342] systemd[1]: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 149 (systemd-binfmt)
[ 3.883659] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[ 3.888277] systemd[1]: Started udev Coldplug all Devices.
[ 3.897603] EXT4-fs (sda1): re-mounted. Opts: discard
[ 3.900088] systemd[1]: Started Remount Root and Kernel File Systems.
[ 3.900285] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 3.900307] systemd[1]: Starting Load/Save Random Seed...
[ 3.902585] systemd[1]: Started First Boot Wizard.
[ 3.902627] systemd[1]: Started Create System Users.
[ 3.902721] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.921119] systemd[1]: Started Rebuild Hardware Database.
[ 3.923669] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 3.944834] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.989763] systemd[1]: Started Load/Save Random Seed.
[ 3.996402] systemd[1]: Started Journal Service.
[ 4.027344] systemd-journald[153]: Received request to flush runtime journal from PID 1
[ 4.068706] scsi 5:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
[ 4.255308] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 4.255872] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.256506] ACPI: Lid Switch [LID0]
[ 4.256592] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 4.256598] ACPI: Sleep Button [SLPB]
[ 4.256677] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.256680] ACPI: Power Button [PWRF]
[ 4.258762] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140724/utaddress-258)
[ 4.258831] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 4.259010] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.259014] ACPI Warning: SystemIO range 0x00000000000011c0-0x00000000000011cf conflicts with OpRegion 0x0000000000001180-0x00000000000011e3 (\GPIO) (20140724/utaddress-258)
[ 4.259020] ACPI Warning: SystemIO range 0x00000000000011c0-0x00000000000011cf conflicts with OpRegion 0x0000000000001180-0x00000000000011df (\_SB_.PCI0.LPCB.EC0_.GPIO) (20140724/utaddress-258)
[ 4.259025] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.259027] ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011e3 (\GPIO) (20140724/utaddress-258)
[ 4.259032] ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011df (\_SB_.PCI0.LPCB.EC0_.GPIO) (20140724/utaddress-258)
[ 4.259037] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.259039] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011e3 (\GPIO) (20140724/utaddress-258)
[ 4.259044] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011df (\_SB_.PCI0.LPCB.EC0_.GPIO) (20140724/utaddress-258)
[ 4.259049] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.259050] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.269927] mei_me 0000:00:16.0: irq 27 for MSI/MSI-X
[ 4.271964] wmi: Mapper loaded
[ 4.285631] pps_core: LinuxPPS API ver. 1 registered
[ 4.285632] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 4.296055] PTP clock support registered
[ 4.302609] acpi device:02: registered as cooling_device4
[ 4.312252] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5
[ 4.315759] cfg80211: Calling CRDA to update world regulatory domain
[ 4.316254] tg3.c:v3.137 (May 11, 2014)
[ 4.331953] snd_hda_intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[ 4.343024] libphy: tg3 mdio bus: probed
[ 4.347850] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 4.355810] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 4.355816] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.355819] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 4.355822] sound hdaudioC0D0: mono: mono_out=0x0
[ 4.355824] sound hdaudioC0D0: dig-out=0x1e/0x0
[ 4.355826] sound hdaudioC0D0: inputs:
[ 4.355830] sound hdaudioC0D0: Internal Mic=0x19
[ 4.355847] sound hdaudioC0D0: Mic=0x18
[ 4.355850] sound hdaudioC0D0: Line=0x1a
[ 4.376574] ACPI Warning: SystemIO range 0x0000000000001840-0x000000000000185f conflicts with OpRegion 0x0000000000001840-0x000000000000184f (\_SB_.PCI0.SBUS.SMBI)
[ 4.376585] snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
[ 4.376586] (20140724/utaddress-258)
[ 4.376588] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.376629] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 4.376647] snd_hda_intel 0000:02:00.1: irq 29 for MSI/MSI-X
[ 4.382917] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 4.383381] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:02:00.1/sound/card1/input9
[ 4.387019] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8
[ 4.387544] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.387608] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.387664] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.400020] ACPI : EC: GPE storm detected(17 GPEs), transactions will use polling mode
[ 4.401237] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 00:26:2d:8f:93:07
[ 4.401242] tg3 0000:03:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=300:01)
[ 4.401246] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 4.401249] tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 4.409557] iTCO_vendor_support: vendor-support=0
[ 4.410156] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.410206] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[ 4.410331] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.412367] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 4.425427] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[ 4.425496] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 4.432515] tg3 0000:03:00.0 enp3s0: renamed from eth0
[ 4.447361] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 4.734058] ACPI: Battery Slot [BAT0] (battery present)
[ 4.745300] ACPI: AC Adapter [ADP1] (off-line)
[ 4.775613] fuse init (API version 7.23)
[ 4.778268] acer_wmi: Function bitmap for Communication Device: 0x8
[ 4.782755] acer_wmi: Brightness must be controlled by acpi video driver
[ 4.782820] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.782823] ACPI: Thermal Zone [TZS0] (35 C)
[ 4.783108] input: Acer BMA150 accelerometer as /devices/virtual/input/input13
[ 4.795068] Non-volatile memory driver v1.3
[ 4.828271] thermal LNXTHERM:01: registered as thermal_zone1
[ 4.828275] ACPI: Thermal Zone [TZS1] (19 C)
[ 4.853600] ath: EEPROM regdomain: 0x65
[ 4.853604] ath: EEPROM indicates we should expect a direct regpair map
[ 4.853607] ath: Country alpha2 being used: 00
[ 4.853608] ath: Regpair used: 0x65
[ 4.859515] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.859871] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90010120000, irq=17
[ 4.927320] wl: module license 'Mixed/Proprietary' taints kernel.
[ 4.927325] Disabling lock debugging due to kernel taint
[ 4.936302] ath9k 0000:05:00.0 wlp5s0: renamed from wlan0
[ 5.109516] Adding 10050556k swap on /dev/sdb4. Priority:-1 extents:1 across:10050556k FS
[ 5.368130] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000, board id: 3655, fw id: 529512
[ 5.424865] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 5.427465] mousedev: PS/2 mouse device common for all mice
[ 5.709002] tg3 0000:03:00.0: irq 30 for MSI/MSI-X
[ 5.720608] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 5.827056] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
[ 5.843968] media: Linux media interface: v0.10
[ 5.853372] Linux video capture interface: v2.00
[ 5.905464] uvcvideo: Found UVC 1.00 device Video WebCam (04f2:b044)
[ 5.961880] input: Video WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input14
[ 5.961974] usbcore: registered new interface driver uvcvideo
[ 5.961976] USB Video Class driver (1.1.1)
[ 6.405675] tg3 0000:03:00.0 enp3s0: Link is down
[ 71.128785] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 74.587344] wlp5s0: authenticate with 14:d6:4d:e7:3a:7e
[ 74.607003] wlp5s0: send auth to 14:d6:4d:e7:3a:7e (try 1/3)
[ 74.613304] wlp5s0: authenticated
[ 74.613603] wlp5s0: associate with 14:d6:4d:e7:3a:7e (try 1/3)
[ 74.698574] wlp5s0: RX AssocResp from 14:d6:4d:e7:3a:7e (capab=0xc11 status=0 aid=1)
[ 74.698685] wlp5s0: associated
[ 74.698730] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[ 74.698779] cfg80211: Calling CRDA to update world regulatory domain
[ 2930.474389] snd_hda_intel 0000:02:00.1: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[10436.180482] chromium: page allocation failure: order:7, mode:0xc0d0
[10436.180491] CPU: 1 PID: 8042 Comm: chromium Tainted: P O 3.17.4-1-ck #1
[10436.180494] Hardware name: Acer Aspire 5740 /Aspire 5740 , BIOS V1.28 08/12/2010
[10436.180497] 0000000000000000 000000006cc4c6ed ffff880155ce76f8 ffffffff81514864
[10436.180502] 000000000000c0d0 ffff880155ce7788 ffffffff8113be9f 0000000000000007
[10436.180505] ffffffff818a9b80 ffffffff818aa900 0000000000000000 000000000000c0d0
[10436.180509] Call Trace:
[10436.180521] [<ffffffff81514864>] dump_stack+0x4d/0x6f
[10436.180527] [<ffffffff8113be9f>] warn_alloc_failed+0xff/0x160
[10436.180532] [<ffffffff8113f157>] ? __alloc_pages_direct_compact+0x1f7/0x200
[10436.180536] [<ffffffff8113f979>] __alloc_pages_nodemask+0x819/0xaf0
[10436.180541] [<ffffffff8113fcd7>] alloc_kmem_pages+0x17/0x20
[10436.180545] [<ffffffff81158ee8>] kmalloc_order+0x18/0x50
[10436.180549] [<ffffffff81159364>] kmalloc_order_trace+0x24/0xc0
[10436.180554] [<ffffffff81189059>] ? __kmalloc+0x159/0x1b0
[10436.180569] [<ffffffff81189059>] __kmalloc+0x159/0x1b0
[10436.180618] [<ffffffffa00c0fdd>] radeon_cs_parser_relocs+0xad/0x490 [radeon]
[10436.180622] [<ffffffff8113f2dc>] ? __alloc_pages_nodemask+0x17c/0xaf0
[10436.180644] [<ffffffffa00c2603>] ? radeon_cs_packet_next_reloc+0x53/0x1b0 [radeon]
[10436.180674] [<ffffffffa0117586>] ? radeon_sa_bo_new+0x1b6/0x4c0 [radeon]
[10436.180696] [<ffffffffa0116986>] ? radeon_semaphore_create+0x56/0x110 [radeon]
[10436.180714] [<ffffffffa00c1c83>] radeon_cs_ioctl+0x123/0x820 [radeon]
[10436.180731] [<ffffffffa00a76fe>] ? radeon_sync_obj_signaled+0xe/0x10 [radeon]
[10436.180744] [<ffffffffa001bf2f>] drm_ioctl+0x1df/0x680 [drm]
[10436.180750] [<ffffffff810d11c2>] ? do_futex+0x132/0xad0
[10436.180761] [<ffffffffa008904c>] radeon_drm_ioctl+0x4c/0x80 [radeon]
[10436.180766] [<ffffffff811b52d0>] do_vfs_ioctl+0x2d0/0x4b0
[10436.180770] [<ffffffff811bf89e>] ? __fget+0x6e/0xb0
[10436.180775] [<ffffffff811b5531>] SyS_ioctl+0x81/0xa0
[10436.180779] [<ffffffff8151ae29>] system_call_fastpath+0x16/0x1b
[10436.180781] Mem-Info:
[10436.180783] DMA per-cpu:
[10436.180786] CPU 0: hi: 0, btch: 1 usd: 0
[10436.180788] CPU 1: hi: 0, btch: 1 usd: 0
[10436.180789] CPU 2: hi: 0, btch: 1 usd: 0
[10436.180791] CPU 3: hi: 0, btch: 1 usd: 0
[10436.180793] DMA32 per-cpu:
[10436.180794] CPU 0: hi: 186, btch: 31 usd: 0
[10436.180796] CPU 1: hi: 186, btch: 31 usd: 0
[10436.180798] CPU 2: hi: 186, btch: 31 usd: 0
[10436.180800] CPU 3: hi: 186, btch: 31 usd: 0
[10436.180801] Normal per-cpu:
[10436.180803] CPU 0: hi: 186, btch: 31 usd: 0
[10436.180805] CPU 1: hi: 186, btch: 31 usd: 0
[10436.180807] CPU 2: hi: 186, btch: 31 usd: 26
[10436.180809] CPU 3: hi: 186, btch: 31 usd: 0
[10436.180814] active_anon:509387 inactive_anon:507728 isolated_anon:0
active_file:286981 inactive_file:304099 isolated_file:0
unevictable:41 dirty:34 writeback:0 unstable:0
free:162328 slab_reclaimable:44420 slab_unreclaimable:27934
mapped:128842 shmem:509848 pagetables:15552 bounce:0
free_cma:0
[10436.180824] DMA free:15896kB min:132kB low:164kB high:196kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15980kB managed:15896kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes
[10436.180826] lowmem_reserve[]: 0 2969 7820 7820
[10436.180835] DMA32 free:239560kB min:25612kB low:32012kB high:38416kB active_anon:761808kB inactive_anon:772912kB active_file:450712kB inactive_file:484140kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:3117972kB managed:3043440kB mlocked:0kB dirty:20kB writeback:0kB mapped:198500kB shmem:777428k -
Radeon HD 7800 (catalyst) + Intel HD graphics (intel-dri) seg fault
Hello, Arch community!
I'm using two monitors setup: one is connected to the Radeon HD 7800 other is connected to the motherboard D-SUB socket.
Symptoms:
- X starts if to use opensource radeon driver.
- X starts if to use only one screen inside ServerLayout section.
- X fails to start If two screens are chosen in ServerLayout section and it prints the following log:
[ 1418.961]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 1419.012] X Protocol Version 11, Revision 0
[ 1419.027] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 1419.042] Current Operating System: Linux Aiur 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
[ 1419.042] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=99bb2cbc-e482-402e-a1ec-91956ac95e90 rw nomodeset i915.modeset=1
[ 1419.070] Build Date: 27 June 2014 07:32:26PM
[ 1419.082]
[ 1419.095] Current version of pixman: 0.32.6
[ 1419.118] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1419.118] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1419.164] (==) Log file: "/var/log/Xorg.1.log", Time: Sun Sep 7 00:53:38 2014
[ 1419.175] (++) Using config file: "xorg.conf"
[ 1419.187] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1419.198] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1419.199] (==) ServerLayout "aticonfig Layout"
[ 1419.199] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 1419.199] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 1419.199] (**) | |-->Device "aticonfig-Device[0]-0"
[ 1419.199] (**) |-->Screen "Screen1" (1)
[ 1419.199] (**) | |-->Monitor "Monitor1"
[ 1419.199] (**) | |-->Device "Card1"
[ 1419.199] (**) Option "Xinerama" "on"
[ 1419.199] (==) Automatically adding devices
[ 1419.199] (==) Automatically enabling devices
[ 1419.199] (==) Automatically adding GPU devices
[ 1419.199] (**) Xinerama: enabled
[ 1419.199] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1419.199] Entry deleted from font path.
[ 1419.199] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1419.199] Entry deleted from font path.
[ 1419.199] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1419.199] Entry deleted from font path.
[ 1419.199] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1419.199] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1419.199] Entry deleted from font path.
[ 1419.199] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1419.199] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 1419.199] (**) ModulePath set to "/usr/lib/fglrx,/usr/lib/xorg/modules,/usr/lib/dri/"
[ 1419.199] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1419.199] (II) Loader magic: 0x811cc0
[ 1419.199] (II) Module ABI versions:
[ 1419.199] X.Org ANSI C Emulation: 0.4
[ 1419.199] X.Org Video Driver: 15.0
[ 1419.199] X.Org XInput driver : 20.0
[ 1419.199] X.Org Server Extension : 8.0
[ 1419.199] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1419.200] (--) PCI: (0:0:2:0) 8086:0162:1849:0162 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 1419.200] (--) PCI:*(0:1:0:0) 1002:6819:1787:201c rev 0, Mem @ 0xe0000000/268435456, 0xf7c00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 1419.200] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 1419.212] Initializing built-in extension Generic Event Extension
[ 1419.223] Initializing built-in extension SHAPE
[ 1419.235] Initializing built-in extension MIT-SHM
[ 1419.247] Initializing built-in extension XInputExtension
[ 1419.259] Initializing built-in extension XTEST
[ 1419.271] Initializing built-in extension BIG-REQUESTS
[ 1419.282] Initializing built-in extension SYNC
[ 1419.294] Initializing built-in extension XKEYBOARD
[ 1419.306] Initializing built-in extension XC-MISC
[ 1419.318] Initializing built-in extension SECURITY
[ 1419.330] Initializing built-in extension XINERAMA
[ 1419.341] Initializing built-in extension XFIXES
[ 1419.353] Initializing built-in extension RENDER
[ 1419.365] Initializing built-in extension RANDR
[ 1419.377] Initializing built-in extension COMPOSITE
[ 1419.388] Initializing built-in extension DAMAGE
[ 1419.400] Initializing built-in extension MIT-SCREEN-SAVER
[ 1419.412] Initializing built-in extension DOUBLE-BUFFER
[ 1419.424] Initializing built-in extension RECORD
[ 1419.435] Initializing built-in extension DPMS
[ 1419.447] Initializing built-in extension Present
[ 1419.459] Initializing built-in extension DRI3
[ 1419.470] Initializing built-in extension X-Resource
[ 1419.481] Initializing built-in extension XVideo
[ 1419.492] Initializing built-in extension XVideo-MotionCompensation
[ 1419.504] Initializing built-in extension XFree86-VidModeExtension
[ 1419.515] Initializing built-in extension XFree86-DGA
[ 1419.526] Initializing built-in extension XFree86-DRI
[ 1419.537] Initializing built-in extension DRI2
[ 1419.537] (II) "glx" will be loaded by default.
[ 1419.537] (II) LoadModule: "glx"
[ 1419.537] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1419.537] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 1419.537] compiled for 6.9.0, module version = 1.0.0
[ 1419.548] Loading extension GLX
[ 1419.548] (II) LoadModule: "fglrx"
[ 1419.548] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 1419.559] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 1419.559] compiled for 1.4.99.906, module version = 14.20.7
[ 1419.559] Module class: X.Org Video Driver
[ 1419.559] (II) Loading sub module "fglrxdrm"
[ 1419.559] (II) LoadModule: "fglrxdrm"
[ 1419.559] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 1419.559] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 1419.559] compiled for 1.4.99.906, module version = 14.20.7
[ 1419.559] (II) LoadModule: "intel"
[ 1419.559] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1419.560] (II) Module intel: vendor="X.Org Foundation"
[ 1419.560] compiled for 1.15.2, module version = 2.99.912
[ 1419.560] Module class: X.Org Video Driver
[ 1419.560] ABI class: X.Org Video Driver, version 15.0
[ 1419.560] (II) AMD Proprietary Linux Driver Version Identifier:14.20.7
[ 1419.560] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.20
[ 1419.560] (II) AMD Proprietary Linux Driver Build Date: May 29 2014 10:25:55
[ 1419.560] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 1419.560] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 1419.560] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 1419.560] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 1419.560] (--) using VT number 7
[ 1419.615] (WW) Falling back to old probe method for fglrx
[ 1419.626] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 1419.628] ukiDynamicMajor: found major device number 251
[ 1419.628] ukiDynamicMajor: found major device number 251
[ 1419.628] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 1419.628] ukiOpenDevice: node name is /dev/ati/card0
[ 1419.628] ukiOpenDevice: open result is 11, (OK)
[ 1419.628] ukiOpenByBusid: ukiOpenMinor returns 11
[ 1419.628] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 1419.631] (--) Chipset Supported AMD Graphics Processor (0x6819) found
[ 1419.631] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 1419.632] (II) fglrx(0): pEnt->device->identifier=0x222aea0
[ 1419.632] (II) intel(1): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[ 1419.632] (II) intel(G0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[ 1419.632] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin
[ 1419.632] (II) Loading sub module "vgahw"
[ 1419.632] (II) LoadModule: "vgahw"
[ 1419.632] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 1419.632] (II) Module vgahw: vendor="X.Org Foundation"
[ 1419.632] compiled for 1.15.2, module version = 0.1.0
[ 1419.632] ABI class: X.Org Video Driver, version 15.0
[ 1419.634] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 1419.634] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 1419.634] (==) fglrx(0): Default visual is TrueColor
[ 1419.634] (**) fglrx(0): Option "DPMS" "true"
[ 1419.634] (==) fglrx(0): RGB weight 888
[ 1419.634] (II) fglrx(0): Using 8 bits per RGB
[ 1419.634] (==) fglrx(0): Buffer Tiling is ON
[ 1419.634] (II) Loading sub module "fglrxdrm"
[ 1419.634] (II) LoadModule: "fglrxdrm"
[ 1419.634] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 1419.634] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 1419.634] compiled for 1.4.99.906, module version = 14.20.7
[ 1419.635] ukiDynamicMajor: found major device number 251
[ 1419.635] ukiDynamicMajor: found major device number 251
[ 1419.635] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 1419.636] ukiOpenDevice: node name is /dev/ati/card0
[ 1419.636] ukiOpenDevice: open result is 15, (OK)
[ 1419.636] ukiOpenByBusid: ukiOpenMinor returns 15
[ 1419.636] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 1419.636] (**) fglrx(0): NoAccel = NO
[ 1419.636] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 1419.636] (--) fglrx(0): Chipset: "AMD Radeon HD 7800 Series " (Chipset = 0x6819)
[ 1419.636] (--) fglrx(0): (PciSubVendor = 0x1787, PciSubDevice = 0x201c)
[ 1419.636] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 1419.636] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 1419.636] (--) fglrx(0): MMIO registers at 0xf7c00000
[ 1419.636] (--) fglrx(0): I/O port at 0x0000e000
[ 1419.636] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 1419.636] (II) fglrx(0): AC Adapter is used
[ 1419.636] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 1419.637] (II) Loading sub module "vbe"
[ 1419.637] (II) LoadModule: "vbe"
[ 1419.637] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 1419.637] (II) Module vbe: vendor="X.Org Foundation"
[ 1419.637] compiled for 1.15.2, module version = 1.1.0
[ 1419.637] ABI class: X.Org Video Driver, version 15.0
[ 1419.637] (II) fglrx(0): VESA BIOS detected
[ 1419.637] (II) fglrx(0): VESA VBE Version 3.0
[ 1419.637] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 1419.637] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 1419.637] (II) fglrx(0): VESA VBE OEM Software Rev: 15.20
[ 1419.637] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 1419.637] (II) fglrx(0): VESA VBE OEM Product: 01
[ 1419.637] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 1419.637] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 1419.637] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[ 1419.637] (II) fglrx(0): PCIE card detected
[ 1419.637] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 1419.637] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 1419.637] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 1419.637] (II) fglrx(0): RandR 1.2 support is enabled!
[ 1419.637] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 1419.637] (II) Loading sub module "fb"
[ 1419.637] (II) LoadModule: "fb"
[ 1419.637] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1419.638] (II) Module fb: vendor="X.Org Foundation"
[ 1419.638] compiled for 1.15.2, module version = 1.0.0
[ 1419.638] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1419.638] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 1419.638] (II) Loading sub module "ddc"
[ 1419.638] (II) LoadModule: "ddc"
[ 1419.638] (II) Module "ddc" already built-in
[ 1419.746] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 1419.746] (II) fglrx(0): Output DFP2 has no monitor section
[ 1419.746] (II) fglrx(0): Output DFP3 has no monitor section
[ 1419.746] (II) fglrx(0): Output DFP4 has no monitor section
[ 1419.746] (II) fglrx(0): Output DFP5 has no monitor section
[ 1419.746] (II) fglrx(0): Output DFP6 has no monitor section
[ 1419.746] (II) fglrx(0): Output DFP7 has no monitor section
[ 1419.746] (II) fglrx(0): Output DFP8 has no monitor section
[ 1419.746] (II) fglrx(0): Output DFP9 has no monitor section
[ 1419.746] (II) fglrx(0): Output DFP10 has no monitor section
[ 1419.746] (II) fglrx(0): Output CRT1 has no monitor section
[ 1419.746] (II) Loading sub module "ddc"
[ 1419.746] (II) LoadModule: "ddc"
[ 1419.746] (II) Module "ddc" already built-in
[ 1419.746] (II) fglrx(0): Connected Display0: CRT1
[ 1419.746] (II) fglrx(0): Display0 EDID data ---------------------------
[ 1419.746] (II) fglrx(0): Manufacturer: SAM Model: 8d7 Serial#: 842282293
[ 1419.746] (II) fglrx(0): Year: 2012 Week: 35
[ 1419.746] (II) fglrx(0): EDID Version: 1.3
[ 1419.746] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 1419.746] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 1419.747] (II) fglrx(0): Max Image Size [cm]: horiz.: 52 vert.: 29
[ 1419.747] (II) fglrx(0): Gamma: 2.20
[ 1419.747] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 1419.747] (II) fglrx(0): First detailed timing is preferred mode
[ 1419.747] (II) fglrx(0): redX: 0.641 redY: 0.338 greenX: 0.315 greenY: 0.629
[ 1419.747] (II) fglrx(0): blueX: 0.159 blueY: 0.059 whiteX: 0.312 whiteY: 0.329
[ 1419.747] (II) fglrx(0): Supported established timings:
[ 1419.747] (II) fglrx(0): 720x400@70Hz
[ 1419.747] (II) fglrx(0): 640x480@60Hz
[ 1419.747] (II) fglrx(0): 640x480@67Hz
[ 1419.747] (II) fglrx(0): 640x480@72Hz
[ 1419.747] (II) fglrx(0): 640x480@75Hz
[ 1419.747] (II) fglrx(0): 800x600@56Hz
[ 1419.747] (II) fglrx(0): 800x600@60Hz
[ 1419.747] (II) fglrx(0): 800x600@72Hz
[ 1419.747] (II) fglrx(0): 800x600@75Hz
[ 1419.747] (II) fglrx(0): 832x624@75Hz
[ 1419.747] (II) fglrx(0): 1024x768@60Hz
[ 1419.747] (II) fglrx(0): 1024x768@70Hz
[ 1419.747] (II) fglrx(0): 1024x768@75Hz
[ 1419.747] (II) fglrx(0): 1280x1024@75Hz
[ 1419.747] (II) fglrx(0): 1152x864@75Hz
[ 1419.747] (II) fglrx(0): Manufacturer's mask: 0
[ 1419.747] (II) fglrx(0): Supported standard timings:
[ 1419.747] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1419.747] (II) fglrx(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 1419.747] (II) fglrx(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 1419.747] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1419.747] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 1419.747] (II) fglrx(0): #5: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 1419.747] (II) fglrx(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 1419.747] (II) fglrx(0): Supported detailed timing:
[ 1419.747] (II) fglrx(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 1419.747] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1419.747] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1419.747] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 1419.747] (II) fglrx(0): Monitor name: S24B350
[ 1419.747] (II) fglrx(0): Serial No: HLNC800121
[ 1419.747] (II) fglrx(0): EDID (in hex):
[ 1419.747] (II) fglrx(0): 00ffffffffffff004c2dd70835353432
[ 1419.747] (II) fglrx(0): 231601030e341d782a2cc1a45650a128
[ 1419.747] (II) fglrx(0): 0f5054bfef80714f81c0810081809500
[ 1419.747] (II) fglrx(0): a9c0b3000101023a801871382d40582c
[ 1419.747] (II) fglrx(0): 450009252100001e000000fd00384b1e
[ 1419.747] (II) fglrx(0): 5111000a202020202020000000fc0053
[ 1419.747] (II) fglrx(0): 3234423335300a2020202020000000ff
[ 1419.747] (II) fglrx(0): 00484c4e433830303132310a202000cc
[ 1419.747] (II) fglrx(0): End of Display0 EDID data --------------------
[ 1419.747] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 1419.747] (II) fglrx(0): EDID for output DFP1
[ 1419.747] (II) fglrx(0): EDID for output DFP2
[ 1419.747] (II) fglrx(0): EDID for output DFP3
[ 1419.747] (II) fglrx(0): EDID for output DFP4
[ 1419.747] (II) fglrx(0): EDID for output DFP5
[ 1419.747] (II) fglrx(0): EDID for output DFP6
[ 1419.747] (II) fglrx(0): EDID for output DFP7
[ 1419.747] (II) fglrx(0): EDID for output DFP8
[ 1419.747] (II) fglrx(0): EDID for output DFP9
[ 1419.747] (II) fglrx(0): EDID for output DFP10
[ 1419.747] (II) fglrx(0): EDID for output CRT1
[ 1419.747] (II) fglrx(0): Manufacturer: SAM Model: 8d7 Serial#: 842282293
[ 1419.747] (II) fglrx(0): Year: 2012 Week: 35
[ 1419.747] (II) fglrx(0): EDID Version: 1.3
[ 1419.747] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 1419.747] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 1419.747] (II) fglrx(0): Max Image Size [cm]: horiz.: 52 vert.: 29
[ 1419.747] (II) fglrx(0): Gamma: 2.20
[ 1419.747] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 1419.747] (II) fglrx(0): First detailed timing is preferred mode
[ 1419.747] (II) fglrx(0): redX: 0.641 redY: 0.338 greenX: 0.315 greenY: 0.629
[ 1419.747] (II) fglrx(0): blueX: 0.159 blueY: 0.059 whiteX: 0.312 whiteY: 0.329
[ 1419.748] (II) fglrx(0): Supported established timings:
[ 1419.748] (II) fglrx(0): 720x400@70Hz
[ 1419.748] (II) fglrx(0): 640x480@60Hz
[ 1419.748] (II) fglrx(0): 640x480@67Hz
[ 1419.748] (II) fglrx(0): 640x480@72Hz
[ 1419.748] (II) fglrx(0): 640x480@75Hz
[ 1419.748] (II) fglrx(0): 800x600@56Hz
[ 1419.748] (II) fglrx(0): 800x600@60Hz
[ 1419.748] (II) fglrx(0): 800x600@72Hz
[ 1419.748] (II) fglrx(0): 800x600@75Hz
[ 1419.748] (II) fglrx(0): 832x624@75Hz
[ 1419.748] (II) fglrx(0): 1024x768@60Hz
[ 1419.748] (II) fglrx(0): 1024x768@70Hz
[ 1419.748] (II) fglrx(0): 1024x768@75Hz
[ 1419.748] (II) fglrx(0): 1280x1024@75Hz
[ 1419.748] (II) fglrx(0): 1152x864@75Hz
[ 1419.748] (II) fglrx(0): Manufacturer's mask: 0
[ 1419.748] (II) fglrx(0): Supported standard timings:
[ 1419.748] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1419.748] (II) fglrx(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 1419.748] (II) fglrx(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 1419.748] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1419.748] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 1419.748] (II) fglrx(0): #5: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 1419.748] (II) fglrx(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 1419.748] (II) fglrx(0): Supported detailed timing:
[ 1419.748] (II) fglrx(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 1419.748] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1419.748] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1419.748] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 1419.748] (II) fglrx(0): Monitor name: S24B350
[ 1419.748] (II) fglrx(0): Serial No: HLNC800121
[ 1419.748] (II) fglrx(0): EDID (in hex):
[ 1419.748] (II) fglrx(0): 00ffffffffffff004c2dd70835353432
[ 1419.748] (II) fglrx(0): 231601030e341d782a2cc1a45650a128
[ 1419.748] (II) fglrx(0): 0f5054bfef80714f81c0810081809500
[ 1419.748] (II) fglrx(0): a9c0b3000101023a801871382d40582c
[ 1419.748] (II) fglrx(0): 450009252100001e000000fd00384b1e
[ 1419.748] (II) fglrx(0): 5111000a202020202020000000fc0053
[ 1419.748] (II) fglrx(0): 3234423335300a2020202020000000ff
[ 1419.748] (II) fglrx(0): 00484c4e433830303132310a202000cc
[ 1419.748] (II) fglrx(0): Printing probed modes for output CRT1
[ 1419.748] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1419.748] (II) fglrx(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1400x1050"x60.0 146.25 1400 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1280x800"x60.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1152x864"x60.0 148.50 1152 2008 2052 2200 864 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1280x768"x60.0 83.50 1280 1352 1480 1680 768 803 809 831 -hsync +vsync (49.7 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 1419.748] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1419.748] (II) fglrx(0): Output DFP1 disconnected
[ 1419.748] (II) fglrx(0): Output DFP2 disconnected
[ 1419.748] (II) fglrx(0): Output DFP3 disconnected
[ 1419.748] (II) fglrx(0): Output DFP4 disconnected
[ 1419.748] (II) fglrx(0): Output DFP5 disconnected
[ 1419.748] (II) fglrx(0): Output DFP6 disconnected
[ 1419.748] (II) fglrx(0): Output DFP7 disconnected
[ 1419.748] (II) fglrx(0): Output DFP8 disconnected
[ 1419.748] (II) fglrx(0): Output DFP9 disconnected
[ 1419.748] (II) fglrx(0): Output DFP10 disconnected
[ 1419.748] (II) fglrx(0): Output CRT1 connected
[ 1419.748] (II) fglrx(0): Using exact sizes for initial modes
[ 1419.748] (II) fglrx(0): Output CRT1 using initial mode 1920x1080
[ 1419.748] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1419.748] (II) fglrx(0): DPI set to (96, 96)
[ 1419.748] (II) fglrx(0): Eyefinity capable adapter detected.
[ 1419.748] (II) fglrx(0): Adapter AMD Radeon HD 7800 Series has 6 configurable heads and 1 displays connected.
[ 1419.748] (==) fglrx(0): PseudoColor visuals disabled
[ 1419.748] (II) Loading sub module "ramdac"
[ 1419.748] (II) LoadModule: "ramdac"
[ 1419.748] (II) Module "ramdac" already built-in
[ 1419.748] (==) fglrx(0): NoDRI = NO
[ 1419.748] (==) fglrx(0): Capabilities: 0x00000000
[ 1419.748] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 1419.748] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 1419.748] (==) fglrx(0): UseFastTLS=0
[ 1419.748] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 1419.748] (--) intel(1): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 1419.748] (--) intel(1): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 1419.748] (==) intel(1): Depth 24, (--) framebuffer bpp 32
[ 1419.748] (==) intel(1): RGB weight 888
[ 1419.748] (==) intel(1): Default visual is TrueColor
[ 1419.748] (**) intel(1): Option "AccelMethod" "sna"
[ 1419.749] (**) intel(1): Framebuffer tiled
[ 1419.749] (**) intel(1): Pixmaps tiled
[ 1419.749] (**) intel(1): Forcing per-crtc-pixmaps? no
[ 1419.749] (II) intel(1): Output VGA1 using monitor section Monitor1
[ 1419.749] (II) intel(1): Output HDMI1 has no monitor section
[ 1419.749] (II) intel(1): Output DP1 has no monitor section
[ 1419.749] (II) intel(1): Output HDMI2 has no monitor section
[ 1419.749] (II) intel(1): Output HDMI3 has no monitor section
[ 1419.749] (II) intel(1): Output DP2 has no monitor section
[ 1419.749] (II) intel(1): Output DP3 has no monitor section
[ 1419.749] (--) intel(1): Using a maximum size of 256x256 for hardware cursors
[ 1419.749] (II) intel(1): Output VIRTUAL1 has no monitor section
[ 1419.749] (--) intel(1): Output VGA1 using initial mode 1366x768 on pipe 0
[ 1419.749] (**) intel(1): TearFree disabled
[ 1419.749] (==) intel(1): DPI set to (96, 96)
[ 1419.749] (II) Loading sub module "dri3"
[ 1419.749] (II) LoadModule: "dri3"
[ 1419.749] (WW) Warning, couldn't open module dri3
[ 1419.749] (II) UnloadModule: "dri3"
[ 1419.749] (II) Unloading dri3
[ 1419.749] (EE) intel: Failed to load module "dri3" (module does not exist, 0)
[ 1419.749] (II) Loading sub module "dri2"
[ 1419.749] (II) LoadModule: "dri2"
[ 1419.749] (II) Module "dri2" already built-in
[ 1419.749] (II) Loading sub module "present"
[ 1419.749] (II) LoadModule: "present"
[ 1419.749] (WW) Warning, couldn't open module present
[ 1419.749] (II) UnloadModule: "present"
[ 1419.749] (II) Unloading present
[ 1419.749] (EE) intel: Failed to load module "present" (module does not exist, 0)
[ 1421.895] (EE) intel(G0): [drm] failed to set drm interface version: Permission denied [13].
[ 1421.895] (EE) intel(G0): Failed to claim DRM device.
[ 1421.895] (II) UnloadModule: "intel"
[ 1421.895] (--) Depth 24 pixmap format is 32 bpp
[ 1421.895] Loading extension ATIFGLRXDRI
[ 1421.895] (II) fglrx(0): doing swlDriScreenInit
[ 1421.895] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 1421.895] ukiDynamicMajor: found major device number 251
[ 1421.895] ukiDynamicMajor: found major device number 251
[ 1421.895] ukiDynamicMajor: found major device number 251
[ 1421.895] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 1421.895] ukiOpenDevice: node name is /dev/ati/card0
[ 1421.895] ukiOpenDevice: open result is 17, (OK)
[ 1421.895] ukiOpenByBusid: ukiOpenMinor returns 17
[ 1421.895] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 1421.895] (II) fglrx(0): [uki] DRM interface version 1.0
[ 1421.895] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 1421.895] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x6277000
[ 1421.895] (II) fglrx(0): [uki] mapped SAREA 0x6277000 to 0x7f0fb99f3000
[ 1421.895] (II) fglrx(0): [uki] framebuffer handle = 0x31000
[ 1421.896] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 1421.896] (II) fglrx(0): swlDriScreenInit done
[ 1421.896] (II) fglrx(0): Kernel Module Version Information:
[ 1421.896] (II) fglrx(0): Name: fglrx
[ 1421.896] (II) fglrx(0): Version: 14.20.7
[ 1421.896] (II) fglrx(0): Date: May 29 2014
[ 1421.896] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 1421.896] (II) fglrx(0): Kernel Module version matches driver.
[ 1421.896] (II) fglrx(0): Kernel Module Build Time Information:
[ 1421.896] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.16.1-1-ARCH
[ 1421.896] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 1421.896] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 1421.896] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 1421.896] (II) fglrx(0): [uki] register handle = 0x00032000
[ 1421.896] (II) fglrx(0): DRI initialization successfull
[ 1421.896] (II) fglrx(0): FBADPhys: 0xf403280000 FBMappedSize: 0x010e0000
[ 1421.897] (==) fglrx(0): Backing store enabled
[ 1421.897] Loading extension FGLRXEXTENSION
[ 1421.897] (**) fglrx(0): DPMS enabled
[ 1421.897] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 1421.897] (**) fglrx(0): Textured Video is enabled.
[ 1421.897] (II) LoadModule: "glesx"
[ 1421.897] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 1421.898] (II) Module glesx: vendor="X.Org Foundation"
[ 1421.898] compiled for 1.4.99.906, module version = 1.0.0
[ 1421.898] Loading extension GLESX
[ 1421.898] (II) fglrx(0): GLESX enableFlags = 8784
[ 1421.898] (II) fglrx(0): GLESX is enabled
[ 1421.898] (II) LoadModule: "amdxmm"
[ 1421.898] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 1421.898] (II) Module amdxmm: vendor="X.Org Foundation"
[ 1421.898] compiled for 1.4.99.906, module version = 2.0.0
[ 1421.913] Loading extension AMDXVOPL
[ 1421.913] Loading extension AMDXVBA
[ 1421.914] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 1421.916] (II) fglrx(0): Composite extension is not loaded
[ 1421.916] (WW) fglrx(0): Option "VendorName" is not used
[ 1421.916] (WW) fglrx(0): Option "ModelName" is not used
[ 1421.916] (II) fglrx(0): X context handle = 0x4
[ 1421.916] (II) fglrx(0): [DRI] installation complete
[ 1421.916] (==) fglrx(0): Silken mouse enabled
[ 1421.916] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 1421.917] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1422.048] (--) RandR disabled
[ 1422.048] (II) intel(1): SNA initialized with Ivybridge (gen7, gt2) backend
[ 1422.048] (==) intel(1): Backing store disabled
[ 1422.048] (==) intel(1): Silken mouse enabled
[ 1422.048] (II) intel(1): HW Cursor enabled
[ 1422.048] (II) intel(1): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1422.048] (==) intel(1): DPMS enabled
[ 1422.048] (II) intel(1): [DRI2] Setup complete
[ 1422.048] (II) intel(1): [DRI2] DRI driver: i965
[ 1422.048] (II) intel(1): [DRI2] VDPAU driver: i965
[ 1422.048] (II) intel(1): direct rendering: DRI2 enabled
[ 1422.048] (==) intel(1): hotplug detection: "enabled"
[ 1422.048] (--) RandR disabled
[ 1422.052] ukiDynamicMajor: found major device number 251
[ 1422.052] ukiDynamicMajor: found major device number 251
[ 1422.052] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 1422.052] ukiOpenDevice: node name is /dev/ati/card0
[ 1422.052] ukiOpenDevice: open result is 19, (OK)
[ 1422.052] ukiOpenByBusid: ukiOpenMinor returns 19
[ 1422.052] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 1422.052] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 1422.053] ukiDynamicMajor: found major device number 251
[ 1422.053] ukiDynamicMajor: found major device number 251
[ 1422.053] ukiDynamicMajor: found major device number 251
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card0
[ 1422.053] ukiOpenDevice: open result is 20, (OK)
[ 1422.053] ukiGetBusid returned 'PCI:1:0:0'
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card1
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: Open failed
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card2
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: Open failed
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card3
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: Open failed
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card4
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: Open failed
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card5
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: Open failed
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card6
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: Open failed
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card7
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: Open failed
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card8
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: Open failed
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card9
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.053] ukiOpenDevice: Open failed
[ 1422.053] ukiOpenDevice: node name is /dev/ati/card10
[ 1422.053] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: Open failed
[ 1422.054] ukiOpenDevice: node name is /dev/ati/card11
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: Open failed
[ 1422.054] ukiOpenDevice: node name is /dev/ati/card12
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: Open failed
[ 1422.054] ukiOpenDevice: node name is /dev/ati/card13
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: Open failed
[ 1422.054] ukiOpenDevice: node name is /dev/ati/card14
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: Open failed
[ 1422.054] ukiOpenDevice: node name is /dev/ati/card15
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: open result is -1, (No such device)
[ 1422.054] ukiOpenDevice: Open failed
[ 1422.054] ukiDynamicMajor: found major device number 251
[ 1422.054] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 1422.054] ukiOpenDevice: node name is /dev/ati/card0
[ 1422.054] ukiOpenDevice: open result is 20, (OK)
[ 1422.054] ukiOpenByBusid: ukiOpenMinor returns 20
[ 1422.054] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 1422.074] (EE)
[ 1422.074] (EE) Backtrace:
[ 1422.074] (EE) 0: X (xorg_backtrace+0x56) [0x58f186]
[ 1422.074] (EE) 1: X (0x400000+0x192fc9) [0x592fc9]
[ 1422.074] (EE) 2: /usr/lib/libpthread.so.0 (0x7f0fb8eeb000+0xf4b0) [0x7f0fb8efa4b0]
[ 1422.075] (EE) 3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs115_atiddxGetGPUMapInfo+0x19c) [0x7f0fb51ecf5c]
[ 1422.075] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (atiddxGetGPUMapInfo+0xd) [0x7f0fb4fffb2d]
[ 1422.075] (EE) 5: /usr/lib/xorg/modules/extensions/libglx.so (0x7f0fb5e26000+0x1ddfd) [0x7f0fb5e43dfd]
[ 1422.075] (EE) 6: /usr/lib/xorg/modules/extensions/libglx.so (0x7f0fb5e26000+0x1f6f5) [0x7f0fb5e456f5]
[ 1422.075] (EE) 7: X (InitExtensions+0x41) [0x4aa4a1]
[ 1422.075] (EE) 8: X (0x400000+0x3ab4f) [0x43ab4f]
[ 1422.075] (EE) 9: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f0fb7b55000]
[ 1422.075] (EE) 10: X (0x400000+0x250fe) [0x4250fe]
[ 1422.075] (EE)
[ 1422.075] (EE) Segmentation fault at address 0x30000014c
[ 1422.075] (EE)
Fatal server error:
[ 1422.075] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 1422.075] (EE)
[ 1422.075] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 1422.075] (EE) Please also check the log file at "/var/log/Xorg.1.log" for additional information.
[ 1422.075] (EE)
[ 1422.075] (II) fglrx(0): Backup framebuffer data.
[ 1422.107] (II) fglrx(0): Backup complete.
[ 1422.416] (EE) Server terminated with error (1). Closing log file.
My xorg.conf (I've merged output from ati-config with existing one for intel):
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen 1 "Screen1" RightOf "aticonfig-Screen[0]-0"
Option "Xinerama" "on"
Option "Clone" "off"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Files"
ModulePath "/usr/lib/fglrx"
ModulePath "/usr/lib/xorg/modules"
ModulePath "/usr/lib/dri/"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
Option "AccelMethod" "uxa"
#Option "Backlight" # <str>
#Option "DRI" # <str>
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "TripleBuffer" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "RelaxedFencing" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "TearFree" # [<bool>]
#Option "PerCrtcPixmaps" # [<bool>]
#Option "FallbackDebug" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "BufferCache" # [<bool>]
Identifier "Card1"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
lscpi:
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 Display controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1c.6 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 7 (rev c4)
00:1c.7 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Z77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Pitcairn PRO [Radeon HD 7850]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
03:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57781 Gigabit Ethernet PCIe (rev 10)
05:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03)
07:00.0 Network controller: Qualcomm Atheros AR93xx Wireless Network Adapter (rev 01)
08:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
I've made a few changes that were mentioned on the Catalyst wiki. They are below:
1. /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="nomodeset i915.modeset=1"
2. /etc/modprobe.d/no_radeon.conf
blacklist radeon
Unfortunately I can't use open-source driver for radeon since I'm getting random frezees of my PC. Especially when some video-content is playing in my browser.
It doesn't relates to main topic (I hope), but let this log be placed here:
Sep 06 04:24:23 Aiur kernel: radeon 0000:01:00.0: ring 5 stalled for more than 10000msec
Sep 06 04:24:23 Aiur kernel: radeon 0000:01:00.0: GPU lockup (waiting for 0x0000000000000004 last fence id 0x0000000000
Sep 06 04:24:23 Aiur kernel: [drm:uvd_v1_0_ib_test] *ERROR* radeon: fence wait failed (-35).
Sep 06 04:24:23 Aiur kernel: [drm:radeon_ib_ring_tests] *ERROR* radeon: failed testing IB on ring 5 (-35).
Sep 06 04:24:23 Aiur kernel: [drm:radeon_pm_resume_dpm] *ERROR* radeon: dpm resume failed
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: GPU fault detected: 146 0x00c28404
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00012206
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x02084004
Sep 06 04:24:24 Aiur kernel: VM fault (0x04, vmid 1) at page 74246, read from TC (132)
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: GPU fault detected: 146 0x00c28404
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00012206
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x02084004
Sep 06 04:24:24 Aiur kernel: VM fault (0x04, vmid 1) at page 74246, read from TC (132)
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: GPU fault detected: 146 0x00c2c804
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00012206
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x020C8004
Sep 06 04:24:24 Aiur kernel: VM fault (0x04, vmid 1) at page 74246, read from TC (200)
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: GPU fault detected: 146 0x00c2c404
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00012206
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x020C4004
Sep 06 04:24:24 Aiur kernel: VM fault (0x04, vmid 1) at page 74246, read from TC (196)
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: GPU fault detected: 146 0x00c2c404
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00012207
Sep 06 04:24:24 Aiur kernel: radeon 0000:01:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x02048004
Thanks for everyone!
MaxSearch the forums for "ati fglrx intel xorg", try using the default aticonfig setup for dual heads with:
aticonfig --initial=dual-head -
Unable to use ATI radeon on linux 3.13
Dell Inspiron N5010 laptop
$ lspci -k | grep -A3 VGA
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV730/M96 [Mobility Radeon HD 4650/5165]
Subsystem: Dell Device 0447
Kernel driver in use: fglrx_pci
Kernel modules: radeon, fglrx
Booting using the 2014.03.01 installer (has the 3.13.5 kernel) completely hangs up my system after some initial loading. I can only boot by setting the nomodeset parameter. After installing xorg and ati drivers and rebooting, I either get a black screen, or the following errors.
Mar 10 14:21:17 sdh-archlinux kernel: [drm] Initialized drm 1.1.0 20060810
Mar 10 14:21:18 sdh-archlinux kernel: [drm] radeon kernel modesetting enabled.
Mar 10 14:21:18 sdh-archlinux kernel: fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Mar 10 14:21:18 sdh-archlinux kernel: [drm] initializing kernel modesetting (RV730 0x1002:0x9480 0x1028:0x0447).
Mar 10 14:21:18 sdh-archlinux kernel: [drm] register mmio base: 0xFBE20000
Mar 10 14:21:18 sdh-archlinux kernel: [drm] register mmio size: 65536
Mar 10 14:21:18 sdh-archlinux kernel: [drm] Detected VRAM RAM=1024M, BAR=256M
Mar 10 14:21:18 sdh-archlinux kernel: [drm] RAM width 128bits DDR
Mar 10 14:21:18 sdh-archlinux kernel: [drm] radeon: 1024M of VRAM memory ready
Mar 10 14:21:18 sdh-archlinux kernel: [drm] radeon: 1024M of GTT memory ready.
Mar 10 14:21:18 sdh-archlinux kernel: [drm] GART: num cpu pages 262144, num gpu pages 262144
Mar 10 14:21:18 sdh-archlinux kernel: [drm] Loading RV730 Microcode
Mar 10 14:21:18 sdh-archlinux kernel: [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
Mar 10 14:21:18 sdh-archlinux kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Mar 10 14:21:18 sdh-archlinux kernel: [drm] Driver supports precise vblank timestamp query.
Mar 10 14:21:18 sdh-archlinux kernel: [drm] radeon: irq initialized.
Mar 10 14:21:18 sdh-archlinux kernel: [drm] ring test on 0 succeeded in 1 usecs
Mar 10 14:21:18 sdh-archlinux kernel: [drm] ring test on 3 succeeded in 1 usecs
Mar 10 14:21:19 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:20 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:21 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:22 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:23 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:24 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:25 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:26 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:27 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:28 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:28 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, giving up!!!
Mar 10 14:21:28 sdh-archlinux kernel: [drm:rv770_startup] *ERROR* radeon: failed initializing UVD (-1).
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Enabling audio 0 support
Mar 10 14:21:28 sdh-archlinux kernel: [drm] ib test on ring 0 succeeded in 0 usecs
Mar 10 14:21:28 sdh-archlinux kernel: [drm] ib test on ring 3 succeeded in 0 usecs
Mar 10 14:21:28 sdh-archlinux kernel: [drm] radeon atom DIG backlight initialized
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Radeon Display Connectors
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Connector 0:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] VGA-1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Encoders:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] CRT1: INTERNAL_KLDSCP_DAC1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Connector 1:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] HDMI-A-1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] HPD1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Encoders:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] DFP1: INTERNAL_UNIPHY
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Connector 2:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] LVDS-1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Encoders:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] LCD1: INTERNAL_UNIPHY2
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Internal thermal controller with fan control
Mar 10 14:21:28 sdh-archlinux kernel: [drm] radeon: dpm initialized
Mar 10 14:21:29 sdh-archlinux kernel: [drm] fb mappable at 0xC045E000
Mar 10 14:21:29 sdh-archlinux kernel: [drm] vram apper at 0xC0000000
Mar 10 14:21:29 sdh-archlinux kernel: [drm] size 4325376
Mar 10 14:21:29 sdh-archlinux kernel: [drm] fb depth is 24
Mar 10 14:21:29 sdh-archlinux kernel: [drm] pitch is 5632
Mar 10 14:21:29 sdh-archlinux kernel: fbcon: radeondrmfb (fb0) is primary device
Mar 10 14:21:29 sdh-archlinux kernel: [drm:rv770_dpm_set_power_state] *ERROR* rv770_restrict_performance_levels_before_switch failed
Mar 10 14:21:29 sdh-archlinux kernel: radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
Mar 10 14:21:29 sdh-archlinux kernel: [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
I am currently using the legacy catalyst drivers + Xorg 1.12. It works, but it has its own set of issues (eg. screenshots not working on KDE)
Is there a easy fix for this so that I can use the open source drivers for my old ATI card or is it a kernel bug and needs to be reported upstream?Hi,
Although I'm a Ubuntu user, not Arch Linux's, but I had the same issue.
Passing radeon.dpm=0 solved the issue (as workaround).
Thank you so much for great information.
# radeon.runpm=0 doesn't solve the issue. Yeah, I firstly thought that this issue was related with acpi; I really had to use acpi=off.
[Edit]
My machine is AMD A8-6500 + MSI A78M-E35.
Without radeon.dpm=0, my machine reboots suddenly rather than blackout.
I have big difficulty of debugging.
Last edited by cielavenir (2014-04-24 03:09:01) -
Hello, I've just transitioned to Arch linux for over a month now. Previously I've used Arch based Manjaro Linux, and other Gentoo based distros, etc.
I've had the same problem everywhere, and that is I've been unable to find a way to get my discrete radeon card working.
I have a Samsung series 5 notebook with dual hybrid switchable graphics with both an intel and a radeon card having dynamic power management options.
Previously, I've posted in Manjaro forum while I was using their distro. Althought it didn't solve my problem but I managed to find a way to turn off discrete card using acpi_call module.
The details of post can be found here, incase you're interested:
https://forum.manjaro.org/index.php?topic=11439.0
Okay, here is a detailed output of various commands so that it's easier for you guys to debug my issue.
dmesg | grep -i radeon
[ 48.347143] [drm] radeon kernel modesetting enabled.
[ 52.841104] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 52.841109] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 52.841319] [drm] radeon: 1024M of VRAM memory ready
[ 52.841321] [drm] radeon: 1024M of GTT memory ready.
[ 53.029165] [drm] radeon/OLAND_mc2.bin: 31452 bytes
[ 53.040894] [drm] radeon: dpm initialized
[ 53.089609] [drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[ 54.318600] radeon 0000:01:00.0: WB enabled
[ 54.318603] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800c2b9cc00
[ 54.318604] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff8800c2b9cc04
[ 54.318606] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff8800c2b9cc08
[ 54.318607] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800c2b9cc0c
[ 54.318608] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff8800c2b9cc10
[ 54.319378] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90016035a18
[ 54.319397] radeon 0000:01:00.0: irq 49 for MSI/MSI-X
[ 54.319406] radeon 0000:01:00.0: radeon: using MSI.
[ 54.319431] [drm] radeon: irq initialized.
[ 54.804694] [drm] Radeon Display Connectors
[ 54.813254] radeon 0000:01:00.0: No connectors reported connected with modes
[ 54.814527] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[ 54.814663] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 1
[ 62.605083] [drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[ 63.610229] radeon 0000:01:00.0: WB enabled
[ 63.610232] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800c2b9cc00
[ 63.610234] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff8800c2b9cc04
[ 63.610235] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff8800c2b9cc08
[ 63.610236] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800c2b9cc0c
[ 63.610237] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff8800c2b9cc10
[ 63.611028] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90016035a18
[ 1593.389010] [drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[ 1594.392958] radeon 0000:01:00.0: WB enabled
[ 1594.392961] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800c2b9cc00
[ 1594.392962] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff8800c2b9cc04
[ 1594.392964] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff8800c2b9cc08
[ 1594.392965] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800c2b9cc0c
[ 1594.392966] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff8800c2b9cc10
[ 1594.393735] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90016035a18
[ 1596.482112] [drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[ 1597.712820] radeon 0000:01:00.0: WB enabled
[ 1597.712822] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800c2b9cc00
[ 1597.712823] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff8800c2b9cc04
[ 1597.712824] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff8800c2b9cc08
[ 1597.712825] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800c2b9cc0c
[ 1597.712826] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff8800c2b9cc10
[ 1597.713604] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90016035a18
$ lspci -k | grep -A2 Display
01:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Mars [Radeon HD 8670A/8670M/8750M] (rev ff)
Kernel driver in use: radeon
Kernel modules: radeon
$ lspci -k | grep -A2 VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
Subsystem: Samsung Electronics Co Ltd Device c706
Kernel driver in use: i915
$ uname -a
Linux GladOS 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64 GNU/Linux
$ inxi -C -G -M
Machine: System: SAMSUNG product: 370R4E/370R4V/370R5E/3570RE/370R5V v: P03RAN serial: JAC991LD100755
Mobo: SAMSUNG model: NP370R4V-S01TH v: SEC_SW__1234567890ABCD serial: 123490EN400015
Bios: American Megatrends v: P03RAN.106.121130.ZW date: 11/30/2012
CPU: Dual core Intel Core i5-3230M (-HT-MCP-) cache: 3072 KB
Clock Speeds: 1: 1200 MHz 2: 1200 MHz 3: 1200 MHz 4: 1200 MHz
Graphics: Card-1: Intel 3rd Gen Core processor Graphics Controller
Card-2: Advanced Micro Devices [AMD/ATI] Mars [Radeon HD 8670A/8670M/8750M]
Display Server: X.org 1.16.0 drivers: ati,radeon,intel (unloaded: fbdev,vesa)
tty size: 112x29 Advanced Data: N/A for root
I've read on Arch wiki somewhere about installing a custom package from AUR called catalyst-total-pxp, but I'm not sure that following through the steps listed on the wiki would be good enough to fix my issue or if it would create more problems. Right now I don't really have another backup computer to fall back on so that's another problem.
But I'm willing to comply to provide more information if need be and if you guys have a fix for similar issue let me know, I'm willing to dive in to get this fixed.
Thanks.
Edit:
When I try to install catalyst-total-pxp from AUR this is what I get:
$ yaourt -S catalyst-total-pxp
==> WARNING: Building package as root is dangerous.
Please run yaourt as a non-privileged user.
==> Downloading catalyst-total-pxp PKGBUILD from AUR...
x .AURINFO
x catalystpxp.sh
x lano1106_fglrx_intel_iommu.patch
x lib32-catalystpxp.sh
x atieventsd.sh
x catalyst_build_module
x catalyst-total-pxp.install
x catalyst-hook.service
x makefile_compat.patch
x fglrx_gpl_symbol.patch
x temp-links-catalyst.service
x switchlibGL
x switchlibglx
x temp_links_catalyst
x 20-catalystpxp.conf
x lib32-catalyst.sh
x lano1106_kcl_agp_13_4.patch
x hook-fglrx
x arch-fglrx-authatieventsd_new.patch
x lano1106_fglrx-13.8_proc.patch
x pxp_switch_catalyst
x atieventsd.service
x cold-fglrx-3.14-current_euid.patch
x ati_make.sh
x catalyst.sh
x PKGBUILD
x catalyst.conf
Comment by Vi0L0 (2014-06-09 20:38)
14.4-21: just a pkgrel bump to confirm 3.15 kernel support
Comment by Vi0L0 (2014-08-07 18:48)
14.4-22 : 3.16 kernel support
Comment by bdero (2014-08-13 02:25)
I also had to downgrade to xorg-xserver 1.14 and xf86-video-intel 2.99.907 to prevent segfaults while starting X. Working well now.
@jadus: thanks for the tip
@Vi0L0: thanks for providing a convenient way to downgrade (http://catalyst.wirephire.com/repo/xorg114/)
Comment by Vi0L0 (2014-08-18 19:49)
14.4-23: added dirty GPL-licensing solution - fglrx_gpl_symbol.patch - workaround for compilation error for i686 on 3.16.1 kernel
Comment by Vi0L0 (2014-08-19 18:24)
@bdero: just curious, on which kernel your pxp is working atm?
catalyst-total-pxp 14.4-23 (Sat Aug 4 21:48:31 ICT 2012)
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
==> WARNING: x86_64 system detected
==> WARNING: [multilib] repository must be uncommented in /etc/pacman.conf to add lib32-catalyst-utils into the package
==> WARNING: OK, lib32-catalyst-utils will be added to the package
==> catalyst-total-pxp dependencies:
- linux>=3.0 (already installed)
- linux<3.17 (already installed)
- linux-headers (already installed)
- xorg-server>=1.7.0 (already installed)
- libxrandr (already installed)
- libsm (already installed)
- fontconfig (already installed)
- libxcursor (already installed)
- libxi (already installed)
- gcc-libs (already installed)
- gcc>4.0.0 (already installed)
- make (already installed)
- patch (already installed)
- libxinerama (already installed)
- lib32-libxext (already installed)
- lib32-libdrm (already installed)
- lib32-libxinerama (already installed)
- xorg-server<1.16.0 (building from AUR)
==> catalyst-total-pxp conflicts:
- libcl-1.1-4
==> Edit catalyst-total-pxp.install ? [Y/n] ("A" to abort)
==> ------------------------------------------------------
==> n
==> Continue building catalyst-total-pxp ? [Y/n]
==> --------------------------------------------
==>
==> Building and installing package
==> Install or build missing dependencies for catalyst-total-pxp:
error: target not found: xorg-server<1.16.0
==> Restart building catalyst-total-pxp ? [y/N]
==> -------------------------------------------
==>
Last edited by irenicus09 (2014-09-01 01:31:03)Yes I understand, I don't have a problem downgrading...but what exactly are the steps that I should take to make sure it doesn't break anything.
I've updated pacman after the addition & when I try to install xorg115 this is what I get:
pacman -S xorg115/xorg-server
warning: downgrading package xorg-server (1.16.0-6 => 1.15.2-1)
resolving dependencies...
looking for inter-conflicts...
:: xorg-server and xf86-input-evdev are in conflict. Remove xf86-input-evdev? [y/N] y
:: xorg-server and xf86-input-joystick are in conflict. Remove xf86-input-joystick? [y/N] y
:: xorg-server and xf86-input-keyboard are in conflict. Remove xf86-input-keyboard? [y/N] y
:: xorg-server and xf86-input-mouse are in conflict. Remove xf86-input-mouse? [y/N] y
:: xorg-server and xf86-input-vmmouse are in conflict. Remove xf86-input-vmmouse? [y/N] y
:: xorg-server and xf86-input-void are in conflict. Remove xf86-input-void? [y/N] y
:: xorg-server and xf86-video-ark are in conflict. Remove xf86-video-ark? [y/N] y
:: xorg-server and xf86-video-ast are in conflict. Remove xf86-video-ast? [y/N] y
:: xorg-server and xf86-video-ati are in conflict. Remove xf86-video-ati? [y/N] y
:: xorg-server and xf86-video-cirrus are in conflict. Remove xf86-video-cirrus? [y/N] y
:: xorg-server and xf86-video-dummy are in conflict. Remove xf86-video-dummy? [y/N] y
:: xorg-server and xf86-video-fbdev are in conflict. Remove xf86-video-fbdev? [y/N] y
:: xorg-server and xf86-video-glint are in conflict. Remove xf86-video-glint? [y/N] y
:: xorg-server and xf86-video-i128 are in conflict. Remove xf86-video-i128? [y/N] y
:: xorg-server and xf86-video-intel are in conflict. Remove xf86-video-intel? [y/N] y
:: xorg-server and xf86-video-mach64 are in conflict. Remove xf86-video-mach64? [y/N] y
:: xorg-server and xf86-video-mga are in conflict. Remove xf86-video-mga? [y/N] y
:: xorg-server and xf86-video-modesetting are in conflict. Remove xf86-video-modesetting? [y/N] y
:: xorg-server and xf86-video-neomagic are in conflict. Remove xf86-video-neomagic? [y/N] y
:: xorg-server and xf86-video-nouveau are in conflict. Remove xf86-video-nouveau? [y/N] y
:: xorg-server and xf86-video-nv are in conflict. Remove xf86-video-nv? [y/N] y
:: xorg-server and xf86-video-openchrome are in conflict. Remove xf86-video-openchrome? [y/N] y
:: xorg-server and xf86-video-r128 are in conflict. Remove xf86-video-r128? [y/N] y
:: xorg-server and xf86-video-savage are in conflict. Remove xf86-video-savage? [y/N] y
:: xorg-server and xf86-video-siliconmotion are in conflict. Remove xf86-video-siliconmotion? [y/N] y
:: xorg-server and xf86-video-sis are in conflict. Remove xf86-video-sis? [y/N] y
:: xorg-server and xf86-video-tdfx are in conflict. Remove xf86-video-tdfx? [y/N] y
:: xorg-server and xf86-video-trident are in conflict. Remove xf86-video-trident? [y/N] y
:: xorg-server and xf86-video-v4l are in conflict. Remove xf86-video-v4l? [y/N] y
:: xorg-server and xf86-video-vesa are in conflict. Remove xf86-video-vesa? [y/N] y
:: xorg-server and xf86-video-vmware are in conflict. Remove xf86-video-vmware? [y/N] y
:: xorg-server and xf86-video-voodoo are in conflict. Remove xf86-video-voodoo? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: xorg-server: requires xf86-input-evdev
If I keep on pressing y, more dependencies seem to show up...and it doesn't feel right.
Am I doin it right? Or is there a better way to go on about this.
Thanks.
Last edited by irenicus09 (2014-09-02 15:37:01) -
[SOLVED] drm:radeon delays xorg start for 30 secs
Does anyone knows about a reason why starting the X.org server could take over 30 seconds?
Jun 19 15:15:59 Arch kernel: [drm] Initialized drm 1.1.0 20060810
Jun 19 15:15:59 Arch kernel: [drm] radeon kernel modesetting enabled.
Jun 19 15:15:59 Arch kernel: radeon 0000:01:00.0: enabling device (0006 -> 0007)
Jun 19 15:15:59 Arch kernel: [drm] initializing kernel modesetting (OLAND 0x1002:0x6600 0x17AA:0x3801).
Jun 19 15:15:59 Arch kernel: [drm] register mmio base: 0xB8000000
Jun 19 15:15:59 Arch kernel: [drm] register mmio size: 262144
Jun 19 15:15:59 Arch kernel: radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
Jun 19 15:15:59 Arch kernel: radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
Jun 19 15:15:59 Arch kernel: [drm] Detected VRAM RAM=2048M, BAR=128M
Jun 19 15:15:59 Arch kernel: [drm] RAM width 128bits DDR
Jun 19 15:15:59 Arch kernel: [drm] radeon: 2048M of VRAM memory ready
Jun 19 15:15:59 Arch kernel: [drm] radeon: 1024M of GTT memory ready.
Jun 19 15:15:59 Arch kernel: [drm] Loading OLAND Microcode
Jun 19 15:15:59 Arch kernel: [drm] radeon/OLAND_mc2.bin: 31452 bytes
Jun 19 15:15:59 Arch kernel: [drm] Internal thermal controller without fan control
Jun 19 15:15:59 Arch kernel: [drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
Jun 19 15:15:59 Arch kernel: [drm] radeon: dpm initialized
Jun 19 15:15:59 Arch kernel: [drm] GART: num cpu pages 262144, num gpu pages 262144
Jun 19 15:15:59 Arch kernel: [drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
Jun 19 15:15:59 Arch kernel: [drm] PCIE gen 3 link speeds already enabled
Jun 19 15:15:59 Arch kernel: [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
Jun 19 15:15:59 Arch kernel: radeon 0000:01:00.0: WB enabled
Jun 19 15:15:59 Arch kernel: radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880157a34c00
Jun 19 15:15:59 Arch kernel: radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880157a34c04
Jun 19 15:15:59 Arch kernel: radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880157a34c08
Jun 19 15:15:59 Arch kernel: radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880157a34c0c
Jun 19 15:15:59 Arch kernel: radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880157a34c10
Jun 19 15:15:59 Arch kernel: radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc900111b5a18
Jun 19 15:15:59 Arch kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Jun 19 15:15:59 Arch kernel: [drm] Driver supports precise vblank timestamp query.
Jun 19 15:15:59 Arch kernel: radeon 0000:01:00.0: irq 41 for MSI/MSI-X
Jun 19 15:15:59 Arch kernel: radeon 0000:01:00.0: radeon: using MSI.
Jun 19 15:15:59 Arch kernel: [drm] radeon: irq initialized.
Jun 19 15:15:59 Arch kernel: [drm] ring test on 0 succeeded in 1 usecs
Jun 19 15:15:59 Arch kernel: [drm] ring test on 1 succeeded in 1 usecs
Jun 19 15:15:59 Arch kernel: [drm] ring test on 2 succeeded in 1 usecs
Jun 19 15:15:59 Arch kernel: [drm] ring test on 3 succeeded in 2 usecs
Jun 19 15:15:59 Arch kernel: [drm] ring test on 4 succeeded in 1 usecs
Jun 19 15:15:59 Arch kernel: [drm] ring test on 5 succeeded in 2 usecs
Jun 19 15:15:59 Arch kernel: [drm] UVD initialized successfully.
Jun 19 15:15:59 Arch kernel: [drm] ib test on ring 0 succeeded in 0 usecs
Jun 19 15:15:59 Arch kernel: [drm] ib test on ring 1 succeeded in 0 usecs
Jun 19 15:15:59 Arch kernel: [drm] ib test on ring 2 succeeded in 0 usecs
Jun 19 15:15:59 Arch kernel: [drm] ib test on ring 3 succeeded in 0 usecs
Jun 19 15:15:59 Arch kernel: [drm] ib test on ring 4 succeeded in 1 usecs
Jun 19 15:15:59 Arch kernel: [drm] ib test on ring 5 succeeded
Jun 19 15:15:59 Arch kernel: [drm] Radeon Display Connectors
Jun 19 15:15:59 Arch kernel: radeon 0000:01:00.0: No connectors reported connected with modes
Jun 19 15:15:59 Arch kernel: [drm] Cannot find any crtc or sizes - going 1024x768
Jun 19 15:15:59 Arch kernel: [drm] fb mappable at 0xB047A000
Jun 19 15:15:59 Arch kernel: [drm] vram apper at 0xB0000000
Jun 19 15:15:59 Arch kernel: [drm] size 3145728
Jun 19 15:15:59 Arch kernel: [drm] fb depth is 24
Jun 19 15:15:59 Arch kernel: [drm] pitch is 4096
Jun 19 15:15:59 Arch kernel: radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
Jun 19 15:15:59 Arch kernel: radeon 0000:01:00.0: registered panic notifier
Jun 19 15:15:59 Arch kernel: [drm] Initialized radeon 2.38.0 20080528 for 0000:01:00.0 on minor 0
Jun 19 15:15:59 Arch kernel: [drm] Memory usable by graphics device = 2048M
Jun 19 15:15:59 Arch kernel: fb: switching to inteldrmfb from VESA VGA
Jun 19 15:16:00 Arch kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Jun 19 15:16:00 Arch kernel: [drm] Driver supports precise vblank timestamp query.
Jun 19 15:16:01 Arch kernel: fbcon: inteldrmfb (fb0) is primary device
Jun 19 15:16:01 Arch kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
Jun 19 15:16:01 Arch kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
Jun 19 15:16:02 Arch kernel: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
Jun 19 15:16:01 Arch slim[818]: (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 19 15:16:01 2014
Jun 19 15:16:01 Arch slim[818]: (==) Using config directory: "/etc/X11/xorg.conf.d"
Jun 19 15:16:01 Arch slim[818]: (==) Using system config directory "/usr/share/X11/xorg.conf.d"
Jun 19 15:16:30 Arch kernel: ACPI: \_SB_.PCI0.PEG0: ACPI_NOTIFY_BUS_CHECK event
Jun 19 15:16:30 Arch kernel: ACPI: \_SB_.PCI0.PEG0: Bus check in hotplug_event()
Jun 19 15:16:30 Arch kernel: radeon 0000:01:00.0: Refused to change power state, currently in D3
Jun 19 15:16:30 Arch kernel: radeon 0000:01:00.0: Refused to change power state, currently in D3
Jun 19 15:16:30 Arch kernel: radeon 0000:01:00.0: Refused to change power state, currently in D3
Jun 19 15:16:31 Arch systemd[1]: Started CUPS Printing Service.
Jun 19 15:16:35 Arch kernel: [drm:atom_op_jump] *ERROR* atombios stuck in loop for more than 5secs aborting
Jun 19 15:16:35 Arch kernel: [drm:atom_execute_table_locked] *ERROR* atombios stuck executing CB7E (len 62, WS 0, PS 0) @ 0xCB9A
Jun 19 15:16:35 Arch kernel: [drm:atom_execute_table_locked] *ERROR* atombios stuck executing B73E (len 236, WS 4, PS 0) @ 0xB80B
Jun 19 15:16:35 Arch kernel: [drm:atom_execute_table_locked] *ERROR* atombios stuck executing B698 (len 78, WS 12, PS 8) @ 0xB6A0
Jun 19 15:16:35 Arch kernel: [drm:si_dpm_enable] *ERROR* si_init_smc_table failed
Jun 19 15:16:35 Arch kernel: [drm:radeon_pm_resume_dpm] *ERROR* radeon: dpm resume failed
Jun 19 15:16:35 Arch kernel: [drm] probing gen 2 caps for device 8086:c01 = 2618d03/e
Jun 19 15:16:35 Arch kernel: [drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
Jun 19 15:16:36 Arch kernel: radeon 0000:01:00.0: Wait for MC idle timedout !
Jun 19 15:16:36 Arch kernel: radeon 0000:01:00.0: Wait for MC idle timedout !
Jun 19 15:16:36 Arch kernel: [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
Jun 19 15:16:36 Arch kernel: radeon 0000:01:00.0: WB enabled
Jun 19 15:16:36 Arch kernel: radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880157a34c00
Jun 19 15:16:36 Arch kernel: radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880157a34c04
Jun 19 15:16:36 Arch kernel: radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880157a34c08
Jun 19 15:16:36 Arch kernel: radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880157a34c0c
Jun 19 15:16:36 Arch kernel: radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880157a34c10
Jun 19 15:16:36 Arch kernel: radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc900111b5a18
Jun 19 15:16:38 Arch kernel: [drm:r600_ring_test] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xFFFFFFFF)
Jun 19 15:16:38 Arch kernel: [drm:si_resume] *ERROR* si startup failed on resume
Jun 19 15:16:38 Arch kernel: [drm:si_dpm_enable] *ERROR* si_init_smc_table failed
Jun 19 15:16:38 Arch kernel: [drm:radeon_pm_resume_dpm] *ERROR* radeon: dpm resume failed
Jun 19 15:16:38 Arch slim[818]: Initializing built-in extension Generic Event Extension
Jun 19 15:16:38 Arch slim[818]: Initializing built-in extension SHAPE
Jun 19 15:16:38 Arch slim[818]: Initializing built-in extension XFree86-DGA
Jun 19 15:16:38 Arch slim[818]: Initializing built-in extension XFree86-DRI
Jun 19 15:16:38 Arch slim[818]: Initializing built-in extension DRI2
Jun 19 15:16:38 Arch kernel: radeon 0000:01:00.0: couldn't schedule ib
Jun 19 15:16:38 Arch slim[818]: Loading extension GLX
Jun 19 15:16:38 Arch acpid[524]: client connected from 833[0:0]
Jun 19 15:16:38 Arch acpid[524]: 1 client rule loaded
Jun 19 15:16:38 Arch kernel: radeon 0000:01:00.0: couldn't schedule ib
Jun 19 15:16:38 Arch kernel: radeon 0000:01:00.0: couldn't schedule ib
Last edited by hazardousagreement (2014-06-19 21:12:23)Hi slacknatcher,
thanks for your help :-)
I looked at this logfile and there xorg just stops for thirty seconds.
[ 35.404] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 55.110] (II) xfree86: Adding drm device (/dev/dri/card1)
So I figured out that for mysterious reasons the radeon kernel module was loaded twice.
I removed it from the kernel modules (mkinitcpi.conf) and the thirty second lag vanished -
[SOLVED] Radeon HD 6310 on AMD E350 APU
I currently have a Raspberry PI running as a download/XBMC server with Arch Linux ARM connected to a TV through HDMI. This worked well so far, but I wanted to take some load off the RPi and bought an AMD E350 APU with an integrated Radeon HD 6310 GPU. Unfortunately, I'm not getting the video/audio out to work properly with Arch Linux x86_64.
Here is what I have done so far (reboots between appropriate steps):
Followed the Beginners' guide as for any other install.
Installed alsa-utils, mesa, mesa-demos, xorg-[server, server-utils, xinit], and created a user and added the user to the "audio,video" groups.
Installed the open source "xf86-video-ati" driver, added "radeon" to my MODULES array, found no other modesetting options, regenerated initramfs, and added a /etc/X11/xorg.conf.d/20-radeon.conf file for good measure. I also added "radeon.audio=1" to my kernel parameters and regenerated the GRUB config file.
With that setup, I tested the sound with the following:
# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
# aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
# speaker-test -c 2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Playback open error: -2,No such file or directory
where the aplay command didn't return an error, but also did not play any sound. Note that a test to the analogue sound did in fact work.
In addition to the sound not working, I wanted to test if the video will work with XBMC with
# glxinfo
Error: unable to open display
Thinking that maybe something went wrong, I reinstalled most of the above mentioned packages to no avail, and also checked that the "radeon" module was loaded, which it was. I then uninstalled the open source driver, removed "radeon" and "radeon.audio=1" from the appropriate files and regenerated GRUB and initramfs.
Next I decided to try the proprietary driver (reboots between appropriate steps):
Added the Vi0l0 [xorg114] and [catalyst] repositories
Installed xorg-related packes, catalyst-[hook, utils, libgl] and checked that "fglrx" was added and blacklisted "radeon".
Ran "aticonfig --initial" and checked the file.
Testing if the display works after verifying that the module loaded with lsmod:
# fglrxinfo
Error: unable to open display (null)
At this point I started to doubt the drivers working with the hardware, so I booted up with a live openSUSE 13.1 USB (kernel 3.11) with the "radeon.audio=1" option enabled. Testing the display here (cropped):
# glxinfo
name of display: :0
display: :0 screen: 0
direct rendering: Yes
seems to work fine, along with HDMI audio.
I have then clean installed Arch again, reinstalled mesa, xorg and xf86-video-ati and re-added all the parameters and such. Also tried some random things like adding "amd64_agp" to the modules, "radeon.pcie_gen2=0" to the kernel parameters in any attempt to get it to work, but nothing has yet.
At this point I'm stuck. Any help in getting this to work will be greatly appreciated.
Other useful info (cropped for relevance):
# cat /proc/asound/cards
0 [Generic ]: HDA-Intel - HD-Audio Generic
HD-Audio Generic at 0xfeb44000 irq 42
1 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xfeb40000 irq 16
# cat /proc/asound/modules
0 snd_hda_intel
1 snd_hda_intel
# lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6310]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
# dmesg | grep radeon
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e847df24-9ec6-4d7a-8cb9-58c67334c6a5 rw quiet radeon.audio=1
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=e847df24-9ec6-4d7a-8cb9-58c67334c6a5 rw quiet radeon.audio=1
[ 1.780114] [drm] radeon kernel modesetting enabled.
[ 1.780205] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 1.781733] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 1.781739] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[ 1.782586] [drm] radeon: 384M of VRAM memory ready
[ 1.782589] [drm] radeon: 1024M of GTT memory ready.
[ 1.807454] radeon 0000:00:01.0: WB enabled
[ 1.807463] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff8800b36bec00
[ 1.807468] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff8800b36bec0c
[ 1.808256] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010eb2118
[ 1.808306] radeon 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.808334] radeon 0000:00:01.0: radeon: using MSI.
[ 1.808379] [drm] radeon: irq initialized.
[ 1.946378] [drm] radeon: dpm initialized
[ 2.025643] fbcon: radeondrmfb (fb0) is primary device
[ 2.069485] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 2.069490] radeon 0000:00:01.0: registered panic notifier
[ 2.069526] [drm] Initialized radeon 2.36.0 20080528 for 0000:00:01.0 on minor 0
Edit: Spelling and dmesg output.
Last edited by cornelus (2014-04-04 15:17:33)Hello andy123, thanks for the response.
As far as I know, I do not believe the /etc/X11/xorg.conf.d/20-radeon.conf file is necessary, but I tested the system with and without it. The current contents is just
Section "Device"
Identifier "Radeon"
Driver "radeon"
EndSection
As you mentioned, I would also prefer using the open source driver as I've often read and heard that it has better support than Catalyst.
Regarding the groups, I did in fact test the system with and without my user being in the video and audio groups. I do not start Xserver explicitly in a desktop environment, but rather just test for an available display via glxinfo. This test works well, as XBMC does the same check to see if OpenGL support is available, will not run if it is not available and prints the same error as glxinfo. No Xorg logs are available in /var/log/, maybe because it does not even begin to start due to lack of display.
The analogue channel is unmuted, and the default HDMI channel does not show a 'Master' or any other channel for that matter except S/PDIF. From a friend I've heard that this is correct, as the HDMI volume can not be set like this. The alsamixer UI is the same as on the openSUSE live disk, which worked fine.
I haven't installed XBMC on the new installation again, but will do so now and see if that forces X to write some logs. -
DPM 2012 R2 RU3 console crashes (v 4.2.1254.0)
Fresh install new server, OS is Windows 2012 R2. When adding an agent to a machine for backup purposes the DPM console crashes and restarts. Although the agent does install this seems broken. Anyone seen this yet?
The description for Event ID 999 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
An unexpected error caused a failure for process 'DPMAMService'. Restart the DPM process 'DPMAMService'.
Problem Details:
<FatalServiceError><__System><ID>19</ID><Seq>0</Seq><TimeCreated>10/9/2014 4:56:45 PM</TimeCreated><Source>DpmThreadPool.cs</Source><Line>163</Line><HasError>True</HasError></__System><ExceptionType>COMException</ExceptionType><ExceptionMessage>The server threw an exception. (Exception from HRESULT: 0x80010105 (RPC_E_SERVERFAULT))</ExceptionMessage><ExceptionDetails>System.Runtime.InteropServices.COMException (0x80010105): The server threw an exception. (Exception from HRESULT: 0x80010105 (RPC_E_SERVERFAULT))
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.AgentManagerServicesProxy.TriggerInstallListRefresh(Guid& jobDefId, String extendedComputerInfoTypeXml)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CoreServicesProxy.TriggerInstallListRefresh(Guid jobDefId, String extendedComputerInfoTypeXml)
at Microsoft.Internal.EnterpriseStorage.Dls.EngineProxyWrapper.EngineServiceProxyWrapper.TriggerInstallListRefresh(Guid jobDefId, String extendedComputerInfoTypeXml)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.ObjectModel.AgentManagement.ServerJob.TriggerRefreshJob()
at Microsoft.Internal.EnterpriseStorage.Dls.UI.ObjectModel.AgentManagement.ProductionServerController.RefreshServers(Object argsObj)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()</ExceptionDetails></FatalServiceError>
the message resource is present but the message is not found in the string/message table
The description for Event ID 945 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Unable to connect to the DPM database because of a general database failure. Make sure that SQL Server is running and that it is configured correctly.
Problem Details:
<FatalServiceError><__System><ID>19</ID><Seq>98</Seq><TimeCreated>10/9/2014 4:56:44 PM</TimeCreated><Source>DpmThreadPool.cs</Source><Line>163</Line><HasError>True</HasError></__System><ExceptionType>SqlException</ExceptionType><ExceptionMessage>The specified '@owner_login_name' is invalid (valid values are returned by sp_helplogins [excluding Windows NT groups]).</ExceptionMessage><ExceptionDetails>System.Data.SqlClient.SqlException (0x80131904): The specified '@owner_login_name' is invalid (valid values are returned by sp_helplogins [excluding Windows NT groups]).
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.Internal.EnterpriseStorage.Dls.Scheduler.SqlAgentHelper.AddJob(String jobName, String jobOwner, String categoryName)
at Microsoft.Internal.EnterpriseStorage.Dls.Scheduler.SqlAgentHelper.AddJobSafeForDomainUser(String jobName, String jobOwner, String categoryName)
at Microsoft.Internal.EnterpriseStorage.Dls.Scheduler.SqlAgentHelper.RegisterSchedule(Schedule schedule)
at Microsoft.Internal.EnterpriseStorage.Dls.Scheduler.RegisterScheduleHelper.PerformDBOperation()
at Microsoft.Internal.EnterpriseStorage.Dls.Scheduler.RegisterScheduleHelper.Execute(SqlContext sqlContext)
at Microsoft.Internal.EnterpriseStorage.Dls.Scheduler.CommandHelper.Execute()
at Microsoft.Internal.EnterpriseStorage.Dls.Scheduler.SchedulerImpl.Register(SqlContext sqlContext, String scheduleXml)
at Microsoft.Internal.EnterpriseStorage.Dls.AgentManager.ConnectivityJobCreator.RecreateJob()
at Microsoft.Internal.EnterpriseStorage.Dls.AgentManager.ConnectivityJobCreator.RecreateConnectivityRefreshJob()
at Microsoft.Internal.EnterpriseStorage.Dls.AgentManager.ACUninstallMachine.CleanUp(Message msg)
at Microsoft.Internal.EnterpriseStorage.Dls.AgentManager.ACUninstallMachine.SucceedTask(Message msg)
at Microsoft.Internal.EnterpriseStorage.Dls.TaskExecutor.Fsm.Engine.ChangeState(Message msg)
at Microsoft.Internal.EnterpriseStorage.Dls.TaskExecutor.TaskInstance.Process(Object dummy)
at Microsoft.Internal.EnterpriseStorage.Dls.TaskExecutor.FsmThreadFunction.Function(Object taskThreadContextObj)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
ClientConnectionId:8c7d0de7-1575-4892-9eb2-f2c2dfe9d912</ExceptionDetails></FatalServiceError>
the message resource is present but the message is not found in the string/message tableHi,
Check for the following:
The registry keys for the SqlAgentAccoutName and SchedulerJobOwnerName are incorrectly formatted using UPN syntax.
Resolution:
Change the following registry values from the
[email protected] format to domain\username:
Path: HKLM\software\Microsoft\Microsoft DPM\setup
Value names: SchedulerJobOwnerName and SqlAgentAccountName
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
Hibernate fails with open source radeon driver
I have set up hibernate properly and it worked on Catalyst.
Today I switched to the open source driver and I can't put my computer in hibernate or hybrid sleep mode. When I try, both of my monitors turn off then immediately turn back on with a completely blank picture. They both report that they are getting the correct mode for them. At this point my HDD led is not blinking (I'm pretty sure the HDD itself has stopped, didn't check), and the reset button is ineffective. If I forcefully power of the PC and turn it back on it boots as if nothing has happened.
I tried linux-ice and uswsusp but neither solved my problem.
Further debugging shows that this is due to KMS (booting with nomodeset lets me hibernate successfully but I'd like to run X). Using the kernel documentation's debug procedures (https://www.kernel.org/doc/Documentatio … ugging.txt) I found that it happens when the kernel suspends devices. I can't really provide much more info unless you guys know how to squeeze it out of the kernel.
It's worth mentioning my GPU is an HD7970 (I can list other things if needed), and that the driver works perfectly fine otherwise. I do recall that hibernating worked at one point but I can't remember when it was broken as I first discovered the bug a few months ago after switching back from catalyst.
I found some guy on the Gentoo forums with the same issue (http://forums.gentoo.org/viewtopic-p-7642484.html) so it might be an upstream bug in the driver. If anyone could shed some light or tell me where to report this bug in particular (kernel ? freedesktop.org ?) I'd be grateful.
Thanks in advance.
Last edited by Streetwalker (2014-12-23 19:56:07)Alright I found the culprit. Adding radeon.dpm=0 to the kernel command line lets me hibernate on the current kernel. I lose power management but it's fine for now, will definitely check things out in the source when I have time.
-
Radeon, XBMC, HD Audio plus a 50% decrease in CPU usage over Catalyst
Radeon, XBMC, VDPAU, HD Audio plus a 50% decrease in CPU usage over AMD Catalyst Drivers
Big Thanks goes out to Fritsch! I could not have put this all together without him doing all the upfront grunt work.
For Fritch's thread and install guide for Ubuntu:
Linux Radeon OSS with vdpau (Ubuntu How To).
Since you are using Arch Linux (which requires Linux experience) I take that into account with my instructions. Consider this an OVERVIEW with the various packages, patches, etc. that you will need to do it yourself.
(If you have installed Arch, XBMC, etc. this should be a breeze. Otherwise, if you need additional help... post and I or someone else will reply.)
What you get:
- Bitstream Audio (including DTS-HD, TrueHD, LPCM 7.1)
- max resolution: 2048 x 1152
- mpeg2, mpeg4, h264, vc1 accleration
- Bob deinterlacing via vdpau
- 24 fps Video Playback (AMD and Intel Haswell CPUs)
- XBMC runs with 50% less CPU usage over AMD Catalyst Drivers
Hardware tested on:
CPU - AMD 8350
Video Cards Tested - AMD 5770 and AMD HD6450
Instructions:
1. Install of Arch (Running Linux Kernel 3.12.1)
2. Install the mesa10-git
(mesa-git,mesa--libgl-git,ati-dri-git)
3. Install linux-firmware, xorg-server, xf86-video-ati, xorg-xinit, etc. using Pacman (Arch Package Manager).
Below is a link to my xorg.conf:
Note: I am running Xen, unRAID, XBMC and several other VMs. XBMC is my desktop so I disabled composite. If you are running a desktop, enable it.
Radeon xorg.conf
Be sure to check out the Radeon Wiki on how to set up your xorg.conf correctly and other settings like Dynamic power management.
4. Add radeon.dpm=1 radeon.audio=1 clocksource=hpet hpet=enable to GRUB_CMDLINE_LINUX in /etc/default/grub.
5. Update grub.
grub-mkconfig -o /boot/grub/grub.cfg
6. Add export LIBVA_DRIVER_NAME=vdpau and export VDPAU_DRIVER=r600 to /etc/bash.bashrc and to /var/lib/xbmc/.bashrc.
7. Unmute any of the S/PDIFs that might be muted.
alsamixer
8. Store alsamixer settings.
alsactl store
9. May be required - Edit /usr/share/alsa/alsa.conf and set the correct card and device id.
For my System:
defaults.pcm.card 0
defaults.pcm.device 3
10. Install xbmc-xvba (FernetMenta).
11. Enable XBMC to autostart:
systemctl enable xbmc.service
To start xbmc:
systemctl start xbmc.service
12. Add / Create advancedsettings.xml (location: /var/lib/xbmc/.xbmc/userdata) and add the following:
<advancedsettings>
<loglevel hide="false">0</loglevel>
<gui>
<algorithmdirtyregions>3</algorithmdirtyregions>
<nofliptimeout>0</nofliptimeout>
</gui>
<video>
<latency>
<delay>0</delay>
<refresh>
<min>23</min>
<max>24</max>
<delay>175</delay> <!-- set to zero or adjust if audio seems out of sync with 24p movies -->
</refresh>
</latency>
</video>
</advancedsettings>
13. Restart XBMC for the above settings to be used:
systemctl restart xbmc.service
XBMC Settings:
Settings->System->Video Output:
Vertical Sync: Always Enabled
Settings->Video->Playback:
VDPAU: On
Prefer VDPAU Mixer: ON
VAAPI: Off
XVBA: Off
Adjust Refreshrate to match video: Off <--- If this is not set to off DTS-HD and TrueHD will not work.
Sync Playback to Display: Off <--- When turned on audio sync issues are possible.
Settings->System->Audio Output
Audio Output: HDMI
Speaker Configuration: 7.1 (5.1 if that is how many speakers you have)
Boost Volume Level on Downmix: On
Output To All Speakers: Off
Dolby Digital (AC-3): On
DTS: On
AAC: On (Not every Receiver can decode AAC. If not, set it to off)
Multichannel LPCM: On
TrueHD:On
DTS-HD:On
Audio Output Device: HD-Audio Generic
Passthrough Output Device: HD-Audio Generic
Last edited by ddeeds (2013-11-29 05:19:44)I followed these instrucitons and the worked perfectly on my HTPC build (running the AMD APU A4-4000 on a Gigabyte GA-F2A88XN-WIFI). I have a quick question though. When I want to shutdown or reboot I hit the power button on the lower left of the XBMC main window. Usually a dialog menu pops up giving me the option to Suspend, Shut-Down, Reboot... etc. etc. The menu in the xbmc-xvba build only shows "Exit". How do I enable these other options? I'd like to at least be able to shutdown or reboot from within XBMC.
EDIT:
Nevermind, I solved it..
I found this thread
It says that running XBMC as a service will not register my session and polkit will not work. I have to autologin as the user xbmc and startx automatically.
I followed the instructions here and here. Then I added "exec xbmc --standalone" to the end of my /var/lib/xbmc/.xinitrc file.
Everything works fine now.
Last edited by necbot (2013-12-05 17:30:18) -
Radeon 0000:01:00.0: Invalid ROM contents
Hi, i change my old Integrated ATI Radeon HD 3300 graphics card by r7 260X 2GB GDDR5 PCIE graphics card .
[hector@archkde ~]$ inxi -Gx
Graphics: Card: Advanced Micro Devices [AMD/ATI] Bonaire XTX [Radeon R7 260X] bus-ID: 01:00.0
Display Server: X.Org 1.16.0 drivers: ati,radeon Resolution: [email protected]
GLX Renderer: Gallium 0.4 on AMD BONAIRE
GLX Version: 3.0 Mesa 10.2.8 Direct Rendering: Yes
When I boot the system says something like:
"kernel: radeon 0000:01:00.0: Invalid ROM contents"
Extract information from teh command jornalctl -b 0
sep 22 17:43:07 archkde kernel: [drm] radeon kernel modesetting enabled.
sep 22 17:43:07 archkde kernel: [drm] initializing kernel modesetting (BONAIRE 0x1002:0x6658 0x1462:0x2935).
sep 22 17:43:07 archkde kernel: [drm] register mmio base: 0xFBD80000
sep 22 17:43:07 archkde kernel: [drm] register mmio size: 262144
sep 22 17:43:07 archkde kernel: [drm] doorbell mmio base: 0xCF800000
sep 22 17:43:07 archkde kernel: [drm] doorbell mmio size: 8388608
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: Invalid ROM contents
sep 22 17:43:07 archkde kernel: ATOM BIOS: 113
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
sep 22 17:43:07 archkde kernel: [drm] Detected VRAM RAM=2048M, BAR=256M
sep 22 17:43:07 archkde kernel: [drm] RAM width 128bits DDR
sep 22 17:43:07 archkde kernel: [TTM] Zone kernel: Available graphics memory: 4089928 kiB
sep 22 17:43:07 archkde kernel: [TTM] Zone dma32: Available graphics memory: 2097152 kiB
sep 22 17:43:07 archkde kernel: [TTM] Initializing pool allocator
sep 22 17:43:07 archkde kernel: [TTM] Initializing DMA pool allocator
sep 22 17:43:07 archkde kernel: [drm] radeon: 2048M of VRAM memory ready
sep 22 17:43:07 archkde kernel: [drm] radeon: 1024M of GTT memory ready.
sep 22 17:43:07 archkde kernel: [drm] Loading BONAIRE Microcode
sep 22 17:43:07 archkde kernel: microcode: CPU0: patch_level=0x010000c6
sep 22 17:43:07 archkde kernel: microcode: CPU0: new patch_level=0x010000db
sep 22 17:43:07 archkde kernel: microcode: CPU1: patch_level=0x010000c6
sep 22 17:43:07 archkde kernel: microcode: CPU1: new patch_level=0x010000db
sep 22 17:43:07 archkde kernel: microcode: CPU2: patch_level=0x010000c6
sep 22 17:43:07 archkde kernel: microcode: CPU2: new patch_level=0x010000db
sep 22 17:43:07 archkde kernel: microcode: CPU3: patch_level=0x010000c6
sep 22 17:43:07 archkde kernel: microcode: CPU3: new patch_level=0x010000db
sep 22 17:43:07 archkde kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
sep 22 17:43:07 archkde kernel: [drm] radeon/BONAIRE_mc2.bin: 31792 bytes
sep 22 17:43:07 archkde kernel: kvm: Nested Virtualization enabled
sep 22 17:43:07 archkde kernel: kvm: Nested Paging enabled
sep 22 17:43:07 archkde kernel: [drm] Internal thermal controller with fan control
sep 22 17:43:07 archkde kernel: [drm] probing gen 2 caps for device 1022:9603 = 300d02/0
sep 22 17:43:07 archkde kernel: [drm] radeon: dpm initialized
sep 22 17:43:07 archkde kernel: input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
sep 22 17:43:07 archkde kernel: input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
sep 22 17:43:07 archkde kernel: input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
sep 22 17:43:07 archkde kernel: input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
sep 22 17:43:07 archkde kernel: input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
sep 22 17:43:07 archkde kernel: input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: mono: mono_out=0x0
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: dig-out=0x20/0x21
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: inputs:
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: Rear Mic=0x1a
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: Front Mic=0x1e
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: Line=0x1b
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: CD=0x1f
sep 22 17:43:07 archkde kernel: input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
sep 22 17:43:07 archkde kernel: input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
sep 22 17:43:07 archkde kernel: input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
sep 22 17:43:07 archkde kernel: input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
sep 22 17:43:07 archkde kernel: input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
sep 22 17:43:07 archkde kernel: input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
sep 22 17:43:07 archkde kernel: input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input22
sep 22 17:43:07 archkde kernel: input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input23
sep 22 17:43:07 archkde kernel: [drm] Found VCE firmware/feedback version 40.2.2 / 15!
sep 22 17:43:07 archkde kernel: [drm] GART: num cpu pages 262144, num gpu pages 262144
sep 22 17:43:07 archkde kernel: [drm] probing gen 2 caps for device 1022:9603 = 300d02/0
sep 22 17:43:07 archkde kernel: [drm] PCIE gen 2 link speeds already enabled
sep 22 17:43:07 archkde kernel: [drm] PCIE GART of 1024M enabled (table at 0x000000000078B000).
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: WB enabled
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8800c59c9c00
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff8800c59c9c04
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff8800c59c9c08
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8800c59c9c0c
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff8800c59c9c10
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc900138b6c98
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff8800c59c9c18
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff8800c59c9c1c
sep 22 17:43:07 archkde kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
sep 22 17:43:07 archkde kernel: [drm] Driver supports precise vblank timestamp query.
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: irq 45 for MSI/MSI-X
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: radeon: using MSI.
sep 22 17:43:07 archkde kernel: [drm] radeon: irq initialized.
sep 22 17:43:07 archkde kernel: [drm] ring test on 0 succeeded in 3 usecs
sep 22 17:43:07 archkde kernel: [drm] ring test on 1 succeeded in 3 usecs
sep 22 17:43:07 archkde kernel: [drm] ring test on 2 succeeded in 3 usecs
sep 22 17:43:07 archkde kernel: [drm] ring test on 3 succeeded in 2 usecs
sep 22 17:43:07 archkde kernel: [drm] ring test on 4 succeeded in 2 usecs
sep 22 17:43:07 archkde systemd-udevd[193]: renamed network interface eth0 to enp2s0
sep 22 17:43:07 archkde kernel: [drm] ring test on 5 succeeded in 2 usecs
sep 22 17:43:07 archkde kernel: [drm] UVD initialized successfully.
sep 22 17:43:07 archkde kernel: [drm] ring test on 6 succeeded in 18 usecs
sep 22 17:43:07 archkde kernel: [drm] ring test on 7 succeeded in 4 usecs
sep 22 17:43:07 archkde kernel: [drm] VCE initialized successfully.
sep 22 17:43:07 archkde kernel: [drm] ib test on ring 0 succeeded in 0 usecs
sep 22 17:43:07 archkde kernel: [drm] ib test on ring 1 succeeded in 0 usecs
sep 22 17:43:07 archkde kernel: [drm] ib test on ring 2 succeeded in 0 usecs
sep 22 17:43:07 archkde kernel: [drm] ib test on ring 3 succeeded in 0 usecs
sep 22 17:43:07 archkde kernel: [drm] ib test on ring 4 succeeded in 0 usecs
sep 22 17:43:07 archkde kernel: [drm] ib test on ring 5 succeeded
sep 22 17:43:07 archkde kernel: [drm] ib test on ring 6 succeeded
sep 22 17:43:07 archkde kernel: [drm] ib test on ring 7 succeeded
sep 22 17:43:07 archkde kernel: [drm] Radeon Display Connectors
sep 22 17:43:07 archkde kernel: [drm] Connector 0:
sep 22 17:43:07 archkde kernel: [drm] DP-1
sep 22 17:43:07 archkde kernel: [drm] HPD2
sep 22 17:43:07 archkde kernel: [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
sep 22 17:43:07 archkde kernel: [drm] Encoders:
sep 22 17:43:07 archkde kernel: [drm] DFP1: INTERNAL_UNIPHY2
sep 22 17:43:07 archkde kernel: [drm] Connector 1:
sep 22 17:43:07 archkde kernel: [drm] HDMI-A-1
sep 22 17:43:07 archkde kernel: [drm] HPD3
sep 22 17:43:07 archkde kernel: [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
sep 22 17:43:07 archkde kernel: [drm] Encoders:
sep 22 17:43:07 archkde kernel: [drm] DFP2: INTERNAL_UNIPHY2
sep 22 17:43:07 archkde kernel: [drm] Connector 2:
sep 22 17:43:07 archkde kernel: [drm] DVI-D-1
sep 22 17:43:07 archkde kernel: [drm] HPD1
sep 22 17:43:07 archkde kernel: [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
sep 22 17:43:07 archkde kernel: [drm] Encoders:
sep 22 17:43:07 archkde kernel: [drm] DFP3: INTERNAL_UNIPHY1
sep 22 17:43:07 archkde kernel: [drm] Connector 3:
sep 22 17:43:07 archkde kernel: [drm] DVI-I-1
sep 22 17:43:07 archkde kernel: [drm] HPD6
sep 22 17:43:07 archkde kernel: [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
sep 22 17:43:07 archkde kernel: [drm] Encoders:
sep 22 17:43:07 archkde kernel: [drm] DFP4: INTERNAL_UNIPHY
sep 22 17:43:07 archkde kernel: [drm] CRT1: INTERNAL_KLDSCP_DAC1
sep 22 17:43:07 archkde kernel: [drm] fb mappable at 0xD098E000
sep 22 17:43:07 archkde kernel: [drm] vram apper at 0xD0000000
sep 22 17:43:07 archkde kernel: [drm] size 8294400
sep 22 17:43:07 archkde kernel: [drm] fb depth is 24
sep 22 17:43:07 archkde kernel: [drm] pitch is 7680
sep 22 17:43:07 archkde kernel: fbcon: radeondrmfb (fb0) is primary device
sep 22 17:43:07 archkde kernel: Console: switching to colour frame buffer device 240x67
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: registered panic notifier
sep 22 17:43:07 archkde kernel: [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
sep 22 17:43:08 archkde kernel: sdb: sdb1
Extract information from the command dmesg
[b][ 6.802759] radeon 0000:01:00.0: Invalid ROM contents[/b]
[ 6.803341] ATOM BIOS: 113
[ 6.803407] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 6.803409] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[ 6.803411] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 6.803412] [drm] RAM width 128bits DDR
[ 6.803494] [TTM] Zone kernel: Available graphics memory: 4089928 kiB
[ 6.803498] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 6.803499] [TTM] Initializing pool allocator
[ 6.803504] [TTM] Initializing DMA pool allocator
[ 6.803523] [drm] radeon: 2048M of VRAM memory ready
[ 6.803524] [drm] radeon: 1024M of GTT memory ready.
[ 6.803535] [drm] Loading BONAIRE Microcode
[ 6.823421] microcode: CPU0: patch_level=0x010000c6
[ 6.883846] microcode: CPU0: new patch_level=0x010000db
[ 6.883865] microcode: CPU1: patch_level=0x010000c6
[ 6.883873] microcode: CPU1: new patch_level=0x010000db
[ 6.883887] microcode: CPU2: patch_level=0x010000c6
[ 6.883896] microcode: CPU2: new patch_level=0x010000db
[ 6.883903] microcode: CPU3: patch_level=0x010000c6
[ 6.883909] microcode: CPU3: new patch_level=0x010000db
[ 6.883961] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.935379] [drm] radeon/BONAIRE_mc2.bin: 31792 bytes
[ 6.938250] kvm: Nested Virtualization enabled
[ 6.938254] kvm: Nested Paging enabled
[ 6.946146] [drm] Internal thermal controller with fan control
[ 6.946190] [drm] probing gen 2 caps for device 1022:9603 = 300d02/0
[ 6.952742] [drm] radeon: dpm initialized
[ 7.074837] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[ 7.074874] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[ 7.074905] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[ 7.074936] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[ 7.074968] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 7.075000] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 7.123312] sound hdaudioC0D0: autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
[ 7.123317] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.123319] sound hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 7.123321] sound hdaudioC0D0: mono: mono_out=0x0
[ 7.123322] sound hdaudioC0D0: dig-out=0x20/0x21
[ 7.123324] sound hdaudioC0D0: inputs:
[ 7.123326] sound hdaudioC0D0: Rear Mic=0x1a
[ 7.123328] sound hdaudioC0D0: Front Mic=0x1e
[ 7.123329] sound hdaudioC0D0: Line=0x1b
[ 7.123331] sound hdaudioC0D0: CD=0x1f
[ 7.135500] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[ 7.135537] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
[ 7.135572] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
[ 7.135610] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
[ 7.135643] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
[ 7.135675] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
[ 7.135711] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input22
[ 7.135741] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input23
[ 7.216535] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 7.216549] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 7.218025] [drm] probing gen 2 caps for device 1022:9603 = 300d02/0
[ 7.218030] [drm] PCIE gen 2 link speeds already enabled
[ 7.231806] [drm] PCIE GART of 1024M enabled (table at 0x000000000078B000).
[ 7.231927] radeon 0000:01:00.0: WB enabled
[ 7.231937] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8800c59c9c00
[ 7.231939] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff8800c59c9c04
[ 7.231941] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff8800c59c9c08
[ 7.231943] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8800c59c9c0c
[ 7.231945] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff8800c59c9c10
[ 7.232338] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc900138b6c98
[ 7.232385] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff8800c59c9c18
[ 7.232387] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff8800c59c9c1c
[ 7.232390] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.232391] [drm] Driver supports precise vblank timestamp query.
[ 7.232409] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[ 7.232420] radeon 0000:01:00.0: radeon: using MSI.
[ 7.232446] [drm] radeon: irq initialized.
[ 7.234443] [drm] ring test on 0 succeeded in 3 usecs
[ 7.234514] [drm] ring test on 1 succeeded in 3 usecs
[ 7.234529] [drm] ring test on 2 succeeded in 3 usecs
[ 7.234673] [drm] ring test on 3 succeeded in 2 usecs
[ 7.234682] [drm] ring test on 4 succeeded in 2 usecs
[ 7.265736] systemd-udevd[193]: renamed network interface eth0 to enp2s0
[ 7.290672] [drm] ring test on 5 succeeded in 2 usecs
[ 7.310663] [drm] UVD initialized successfully.
[ 7.420593] [drm] ring test on 6 succeeded in 18 usecs
[ 7.420606] [drm] ring test on 7 succeeded in 4 usecs
[ 7.420607] [drm] VCE initialized successfully.
[ 7.420845] [drm] ib test on ring 0 succeeded in 0 usecs
[ 7.421000] [drm] ib test on ring 1 succeeded in 0 usecs
[ 7.421153] [drm] ib test on ring 2 succeeded in 0 usecs
[ 7.421312] [drm] ib test on ring 3 succeeded in 0 usecs
[ 7.421470] [drm] ib test on ring 4 succeeded in 0 usecs
[ 7.442273] [drm] ib test on ring 5 succeeded
[ 7.463141] [drm] ib test on ring 6 succeeded
[ 7.463881] [drm] ib test on ring 7 succeeded
[ 7.464397] [drm] Radeon Display Connectors
[ 7.464399] [drm] Connector 0:
[ 7.464400] [drm] DP-1
[ 7.464401] [drm] HPD2
[ 7.464403] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 7.464404] [drm] Encoders:
[ 7.464405] [drm] DFP1: INTERNAL_UNIPHY2
[ 7.464406] [drm] Connector 1:
[ 7.464407] [drm] HDMI-A-1
[ 7.464408] [drm] HPD3
[ 7.464409] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 7.464410] [drm] Encoders:
[ 7.464411] [drm] DFP2: INTERNAL_UNIPHY2
[ 7.464411] [drm] Connector 2:
[ 7.464412] [drm] DVI-D-1
[ 7.464413] [drm] HPD1
[ 7.464414] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 7.464415] [drm] Encoders:
[ 7.464416] [drm] DFP3: INTERNAL_UNIPHY1
[ 7.464416] [drm] Connector 3:
[ 7.464417] [drm] DVI-I-1
[ 7.464418] [drm] HPD6
[ 7.464419] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[ 7.464420] [drm] Encoders:
[ 7.464421] [drm] DFP4: INTERNAL_UNIPHY
[ 7.464422] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.522317] [drm] fb mappable at 0xD098E000
[ 7.522319] [drm] vram apper at 0xD0000000
[ 7.522320] [drm] size 8294400
[ 7.522321] [drm] fb depth is 24
[ 7.522322] [drm] pitch is 7680
[ 7.522393] fbcon: radeondrmfb (fb0) is primary device
[ 7.548240] Console: switching to colour frame buffer device 240x67
[ 7.554350] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 7.554352] radeon 0000:01:00.0: registered panic notifier
[ 7.577645] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
[ 7.917370] sdb: sdb1
[ 7.920476] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 8.216032] Adding 2000892k swap on /dev/sda5. Priority:-1 extents:1 across:2000892k FS
[ 8.426163] mousedev: PS/2 mouse device common for all mice
[ 8.668832] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.782334] systemd-journald[150]: Received request to flush runtime journal from PID 1
[ 12.047252] cfg80211: Calling CRDA to update world regulatory domain
[ 18.978595] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 18.978652] ATL1E 0000:02:00.0 enp2s0: NIC Link is Up <100 Mbps Full Duplex>
[ 18.978665] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 43.980440] fuse init (API version 7.23)
I notice that when I move the windows on the desktop a kind of tearing occurs in the edge of the windows.
My O.S is KDE ( Kdebase-workspace 4.11 and aplications 4.14.x ) and the kernel is 3.16.3-1-ARCH.
Thanks.https://wiki.archlinux.org/index.php/AT … nce_tuning
EXAVSync
Do you also get artifacts like messed up fonts? -
Overheating Mobility Radeon 4650
Hey guys,
My friend has a hp pavilion dv6 with an ATI Mobility Radeon 4650 graphics card. The computer overheats a lot using the opensource radeon driver and, from what I gather, the fglrx driver no longer supports this card.
I have googled around and can't seem to find an suitable alternative. Right now he's using a notepad cooler to try and cool things of, but still he's getting higher temps (and fan usage) than on Windows without the cooler. Compiling stuff is impossible, as the overheating causes the computer to reboot.
Has anyone ever managed to work around this?
Although he currently doesn't have Arch installed, he used it for a while with the same results... He's tried Ubuntu 13.10 and Opensuse 13.1 (his distro atm).
Thanks,Did your friend use a kernel where the following kernel paramter was supported and enabled with the Open Source driver?:
radeon.dpm=1
What about using Vi0L0's repository for Legacy cards for the proprietary driver?
Last edited by clfarron4 (2014-03-03 10:27:02)
Maybe you are looking for
-
Adding New Data To Same Page - HELP
I am trying to put together a invoice on the fly, the products are added to the invoice by selecting the disired product from a drop down menu and hitting the add button. You SHOULD then be able to select more products from the same drop down menu an
-
Definition of base class _ not found
Hi there! While exploring Flex 3 (really neat btw) and building my first app, I tried the following: public class X extends EventDispatcher {} This gives me a compile time error #1017: The definition of the base class EventDispatcher was not found. T
-
Include Develop settings in metadata inside JPEG, TIFF, and PSD files ignored when unchecked
In the Catalog Settings under the Metadata tab, I have unchecked the option 'Include Develop settings in metadata inside JPEG, TIFF and PSD files'. I then selected a JPEG photograph in the Library module and chose Metadata/Save Metatdata to File. I
-
Problem in % display (formula)
Hello, I have a simple report with one key figure (e.g. Sales in EUR). Now I want to create a formula which shows the % sales from result. Example: Sales in EUR Sales in % Customer A 30.000 30%
-
Apple? Hello...Is there anybody in there? Just nod if you can hear me.
Has anyone seen any kind of acknowledgment from Apple that there even is a problem? It is clear from the outcry across this and other boards that this latest version is negatively affecting a considerable amount of users. But I still haven't seen App