RAID configuration down and OS

i've server HP Prolaint ML 370 G4
hard 3 x 72GB disks are RAID one of them is down and damaged, i bring new one and replace the damaged
OS windows server 2003 is down can't boot with error (there is no disks)
i got the smart CD and access to discover RAID config.
i founded its 137 GB as logical drive but when tried to access using live CD this 137 GB are free with no data ?
i bring some free software and tried to scan disk to get data it's segmented to parts and seems to be corrupted?
i'm not sure that RAID already rebuilder and become health, i tried to access and test controller it's OK with no errors right now?
but during starting server on the sreen this warning "error 1785 slot 4 drive array not configured"
advice please
Thanks on advance,

Hi,
Please refer to the article below in HP support center, it may be helpful:
Smart
Array Controllers - "1785 - Slot X Drive Array Not Configured"
Best regards,
Susie

Similar Messages

Two Xserve and Xserve RAID configuration advice

I'm configuring a brand new set-up and I'm looking for input in RAID configuration.
Basically I have two essentially identical Xserves: 2.3x2, 80x2, 500 and a fully loaded XRAID running 6 drive RAID 5 with a hot spare on each side all running through a fibre channel switch. One Xserve is slated to be a pure fileserver and the primary XRAID access box and the other will handle web/email/database serving etc.
I'm going to use the first 80 as a system drive (mirrored to the other 80 for redundancy) and I wanted to carve out about a 500gig partition of one of the RAIDs for the webmail server to use as its data drive so it would have the RAID 5 protection. Unfortunately to properly get this configuration I think I'd need to heavily slice one of the RAIDs and then use LUN masking to hide the drives from the respective machines. I guess I could then use Disk Utility to to concatenate the remaining slices back into a single volume - but this seems like adding layers of complexity to what seems like it should be a simple task.
Another thought I had was to re-create the RAID of one side as a 5 disk array, use the extra 500 gig drive as a mirroring drive for the internal Xserve 500 and while I couldn't swap them out directly I could replace a 500 (if it went bad) and use the mirror to bring it back to an immediate pre-failure state relatively quickly.
At this point I'd settle for mirroring one Xserve 500 to the other Xserve 500 which would give me a direct swap-out replacement - but I don't know if that's even technically possible. It has gotten complicated enough that I'm considering simply using the internal 500 as the data drive and depending on heavy back-ups for protection.
I'm looking for any advice, thoughts or technical tips eveyone might have to offer.
TIA,
=Tod

I must not have explained what I want to do clearly enough. The complication is that I want Xserve 1 to see Array 1 and 80% of Array 2 and Xserve 2 to see the remaining 20% of Array 2, but neither must be able to see the same section at the same time or very bad things can happen.
The only way I'm aware of to do this is to slice all of Array 2 into 20% slices and use LUN masking to make 4 slices visible to Xserve 1 and the 5th slice visible only to Xserve 2. I could partition Array 2 into 80% and 20% partitions and then unmount the 80 partition from the Xserve 2 and unmount the 20 from the Xserve 1 using disk utility. But the potential for something bad happening down the road exists unless I can find a way to suppress volumes from mounting. (I saw this hack: http://www.macgeekery.com/gspot/2005-12/hiding_partitions but need to investigate much further before actually trying it.)
Also the back-up unit is tied into the switch and therefore everything needs to run through the switch.
Thanks,
=Tod

Is there a way to run a external ssd with my mid 2011 iMac hdd in a raid configuration and basically have a fusion drive

is there a way to run a external ssd with my mid 2011 iMac hdd in a raid configuration and basically have a fusion drive

A Fusion Drive is not a RAID; it's a CoreStorage logical volume group. While it's technically possible to do as you suggest, there would be little or no benefit from it.

UCSM 2.1 Local disk configuration policy and raid volumes

Hi!
If i use Any configuration as local disk configuration policy and do the raid settings directly to the RAID-cards, am i able to have two raid volumes on C-series under UCSM management?
What i would like to do with C240M3 with 6 local disks: 2 disk raid1 and 4 disk raid0
So i would use:
"Any Configuration—For a server configuration that carries forward the local disk configuration without any changes."
As UCS servers Raid guide indicates:
"Maximum of One RAID Volume and One RAID Controller in Integrated Rack-Mount Servers
A rack-mount server that has been integrated with Cisco UCS Manager can have a maximum of one RAID volume irrespective of how many hard drives are present on the server. "
Is this paragraph limitation of GUI not able to set several volumes or hard fact without "Any configuration" workaround?

I did some testing about this issue:
Changed Local Disk Configuration to "Any Configuration"
Two virtual disks can be created from Raid card's WebBIOS
These disks are visible to RedHat Installation.
UCSM shows Any configuration for the Storage Local Disk policy
Actual Disk Configuration has faulty information - WebBios is the only place to check the RAID status?
Next step: I'll do the same for the production

How do I configure my system so that Oracle 10g properly shuts down and sta

How do I configure my system so that Oracle 10g properly shuts down and starts up when I reboot my Solaris system?

http://download.oracle.com/docs/cd/B19306_01/server.102/b15658/strt_stp.htm#sthref255

X4500 Thumper and RAID configuration

Hi,
Scenario:
Suppose I have an X4500 running with Solaris and ZFS . I configured RAID5 configuration with the ZFS tools. The RAID is working fine, but after x months/years I need to make a new Solaris installation from scratch on the X4500 machine.
Will my ZFS data located in the RAID be in danger?
In a hardware based RAID, the meta-data for the RAID configuration and rebuilding it is done regardless of the OS running above it. It is done by the RAID controller.
However, in X4500 with Solaris+ZFS - the OS itself is managing the RAID configuration. So...? What will happen to the data if the OS fails or needs to be reinstalled?
Thanks,
Itay.

By RAID5 I assume you mean RAID-Z which is the ZFS replacement for RAID-5. If you actually mean SVM RAID-5 with ZFS on top of that, I don't think there is a way to get the data. But with ZFS, the state is actually stored within the pool, so it is system-independent. If you intend to upgrade, first run zpool export, do the install, then do zpool import (it will scan your disks for any pools). If your system crashes, you should be able to do a zpool import -f (which will force import a non-exported zpool).

K8n neo platinum, RAID configuration and linux

Hi all, please be gentile to me becouse I dont understand much about technical issues of computers...
Here is my problem: I am using windows XP but today I decided install Suse Linux 10.0 32bits version also, but a warning came out saying something about I have RAID by software and if I install linux the data of the discs will be erased. I have a SATA2 80GB hitachi drive with Windows XP installed and a 2 partitioned drive 120 GB samsung sp1203n (IDE) with data in one partition and an empty one that I want do install linux in it. Can someone tell me how can I configure a RAID without losing any data so I can install Linux? I hardly know what a RAID is... lol
Thanks in advance...
Here is my machine specification:
AMD Athlon 64 2800+
MSI K8N Neo platinum
HP DVD 200I
Philips DVD writer
Hitachi Deskstar 80GB SATA2
Samsung SP1203N 120GB IDE
Radeon 9600XT
2*Kingston 512 3200 cl3
Revoltec power supply with 25Amps in 12v rail

Quote from: kakarocht on 28-October-06, 13:05:36
Does your RAID shown you HEALTHY?
The Raptor drive shows as healthy.
Quote
You may need to press F6 (using the NVIDIA raid driver for Win64 if you're using the RAID). As Win32 and Win 64 using different drivers.
This has crossed my mind and is definitely on my list of things to try if all else fails.
Quote
Have you enable the RAID Array as Bootable Drive in the Bios?
All RAID options are enabled. I didn't touch the BIOS prior to starting the process. The RAID array wasn't listed in the BIOS as a bootable device. In fact, it wasn't listed at all. It was after I discovered this I used F10 to see if it was detected there. The drive was listed, but it wasn't bootable. I then made it bootable. After exiting this section, the PC booted straight into Windows. On the occasions when Windows started, I didn't go into the BIOS to see what it shows.
Quote
But why you need to used the NFORCE3 instead of Nforce4 Drivers from the NVIDIA website?
Because it's an nForce 3 board. Or are you saying the nForce 4 should work fine?
Quote
Gd luck.
Thanks.

Bios not install error and Raid Configuration not showing physcial HDD in Lenovo

Is this a SATA hard drive by any chance? Sounds like you have an Adaptec SCSI controller, but no hard drive attached to it. Are you booting an install DVD of some sort?

Bios not install error and Raid Configuration not showing physcial HDD in Lenovo RD 120 Server (New)
updated bios still same error
and at array configuration it is not showing any hard disk
hard disk utility it is showing hard disk
we are trying to install OS with single hard disk in Lenovo RD 120 Server
This topic first appeared in the Spiceworks Community

How do I get Thunderbird to connect to a properly-configured Office 365 mail account after shutting down and then restarting the client?

I get my Office 365 account set up and working in Thunderbird. I can download and send mail just fine using the auto-detect or manual account settings recommended by Microsoft/Outlook/Office 365. Everything appears to be working as it should as long as the client stays open. When I shut the Thunderbird client down and restart it, it can no longer access the Office 365 mail account. I get a popup error message:
The current operation on 'Inbox' did not succeed. The mail server for account (my Office 365 account) responded: User is authenticated but not connected.
It has no problem connecting to Hotmail, Gmail and other email services, and I can access Office 365 through the web client, but Thunderbird refuses to connect. If I remove the account and re-add it, I can have full access to my email again, but only as long as Thunderbird stays open. If the client gets restarted, it's gone again.
How do I fix this?

I think you might be having a cached password problem. I was having it and was able to resolve by deleting my stored password in Thunderbird. I referenced
http://kb.mozillazine.org/Setting_and_changing_email_passwords
and also posted my question and resolution:
https://support.mozilla.org/en-US/questions/1015221#answer-615054

Raid configuration -- the elusive best practice/best value framework

After much research on RAID, both on and off the Apple site, I am still looking for answers. I searched RAID threads for thoughts on some of the top users in the Forum so I apologize, I am sure some of this seems old hat to you old Pros.
I just bought a Mac Pro. Haven't even fired it up yet because I want to get the storage issue (RAID 0 or 1, or 0+1) settled before I transfer my jpg and video files. I have pretty much decided against the expense of the Hardware RAID card when its performance seems somewhat less than rock solid (perhaps a myth). Anyway, with a 4-core PRO I assume (correct if I am wrong) that the CPU hit to do software RAID is reasonable.
Other Questions:
1) The single 640 Gb hard drive as retailed. Can I separate "Users and their jpg/video files" to a drive separate from the boot, OSX, and Applications? Is it advisable?
2) If #1 is recommended, should I then mirror the boot drive or simply Time Machine the backup of the single drive?
3) Somewhere someone suggested better performance by putting together drive 1 and 3, and drive 2 and 4? I don't recall if that approach was RAID 1 for drive 1&3 (mirroring the boot), and striped (RAID 0) for drive 2 and 4. Your thoughts on this -- assuming its even relevant based on your recommendation for the boot drive on question #1 and #2?
4) So at this point we're down to how we should use either the remaining two or three drive bays depending the choice taken with the boot drive. What is your recommendation for optimal value -- e.g. maximizing storage, data protection, and costs. Note: I am willing to purchase external drive(s) for Time Machine backup.
5) Name your top two or three internal and external drive picks for this arrangement.
Thanks much for your help on this. Anything else you'd like to suggest or question for clarification.
cougar90

Well, if you're going to be using the system for dual purposes, right off the bat maybe software raid is not for you (especially a 0+1). That's a lot of overhead to be dealing with: video editing plus users accessing files on the same comp.
If you have users needing to access files, I would keep the "video editing" system and "server" system separate.
Hatter's idea of a PC/Mac compatible NAS sounds good; very easy and affordable to implement. I only wonder about the speed, if you will be transferring large video files, and have multiple users connected at once (although if hatter recommended it, I'm sure it's fine). If you do go the NAS route though, make sure you have a gigabit network running. If you have any old computer system laying around (pc or mac), you can also configure that very easily as a server. Add hard drives or external enclosures for space. If it's a spare mac, and you have tiger 10.4, the app sharepoints works very well.
The PVR can be done on the Mac pro; keep it with the "video editing" system.
In regards to Raid card stability, I believe you were looking at the "Apple Raid Card" for the mac pro. Yes, there have been many problems with it regarding the battery. However this is pertaining to only the Apple raid card, NOT hardware raid in general.
There are other companies that put out very solid raid cards. Check the before link to www.amug.org, they are a great resource of raid info. On my setup, I use an ATTO Card connected to a D800RAID from Sonnet (mine is the previous model).
http://www.sonnettech.com/product/fusiondx800raid.html
http://eshop.macsales.com/item/ATTO/ESASR380000/
Also, before even attempting raid, get a good grasp on it.
http://www.acnc.com/040100.html
http://en.wikipedia.org/wiki/RAID
Note RAID 5 needs Hardware Raid. Also if hardware raid is too expensive, you can also go with esata enclosures. This sonnet enclosure with esata card for example:
http://www.sonnettech.com/product/fusiond500p.html
http://www.sonnettech.com/product/temposatae4p.html
More affordable, with great performance. Use for Raid 0 scratch, temp files.

Intel(R) Embedded Server RAID Technology II and Oracle VM Server

Hi There
This is a head's up for anyone installing on a beast with the above mentioned on-board raid controller.
You have to use the Intel Setup CD to configure the raid. When you use the raid's bios to setup raid, the bios assign a name to the raid that confuse/brakes dmraid. I don't think you can set the raid's name in the bios. When you use the Intel CD you can configure the raid and you can edit the name of the raid. Pleas note, no spaces and no funny characters like #,%,@, in the raid name.
If you don't use the Intel CD, the bios/dmraid create a name that changes every time you reboot the server, I think this is due to spaces and the funny characters. So install will work but after the first reboot, dmraid won't find the raid and your raid configuration won't work.
Ciao
Nardus

Hi,
Thank you for the information. As you said from the behavior it seems that the build-in drivers of Windows Server Technical Preview will not work with the specific motherboard hence the RAID1 cannot work well.
I'll log the issue down.
If you have any feedback on our support, please send to [email protected]

Is RAID configuration possible on MSI GX660 266NE gaming laptop

[ ERROR: SPECIFIED ATTACHMENT MISSING ] Hello
I have a GX660 266NE laptop that came installed with a single harddrive. I have now replaced it with 2 Kingston SSDNow 240 GB SSD harddrives. I have also flashed BIOS to the latest on MSI support that includes the option for RAID configuration. In BIOS I have enabled RAID but when I save this BIOS configuration I do not get the option to press ctrl+I to enter Intel Rapid Storage Tech RAID configuration.
Any ideas of what i am missing? or is it simply not possible to make RAID running on this laptop?
Thanks in advance and english it not my native language so excuse me for any misspelling and not correct sentences :-)

Hi, Is your BIOS updated to version 30L?
http://www.msi.com/support/nb/GX660.html#down-bios
I saw a successful example on Youtube:

What is the best RAID configuration for a MacPro as a Logic User?

There ought to be a universal answer to this question: what is the best RAID configuration for Logic Mac Pro users? I will be more specific.
I use Logic Studio, Reason, Ableton, and Motu Symphonic Instrument simultaneously.
I want to fail safe my precious audio files and improve performance as the system reads/writes data from multiple files, from audio tracks to digital samples.
I want to run video files simultaneously to do nifty audio soundtracking to video.
Here is the configuration I have in mind.
HD 1: OS and Logic Studio, Reason/Ableton samples etc. software (non-raid) (250 GB)
HD 2/3: MIrrored RAID set for AUDIO FILES (500 Gb identical pair)
HD 4: Video files / Bouncing (1 TB)
Makes sense right? A disk for reading software. A pair of 500 GB disks for reading/writing audio files and sessions in mirrored array. A 1 TB disk for video and bouncing. The main question I have is, for audio files only, is striped or mirrored better? 64K blocks the best? And are there any more details. I assume to do this in Disk Utility.

Well, both Mirrored and Striped have their pros and cons. If you use mirrored, it will offer no better performance than the spec'ed drive along with it's sata bus speed. The plus point is, if one drive goes down, you have the second as a backup as the complete contents of one drive are mirrored on the other.
With striped you will get a performance boost because all files (for example a single project) will get written across both drives and hence split the load on the drives and the SATA busses. The drawback is that you'll have to make sure you have a good, regular backup schedule in place because when one of the drives goes to drive heaven, you're going to be stuffed without a full backup of both drives.
Exactly what performance boost you'd get will depend on your project, number of files, size of files, fragmentation of files, track count etc. You may find it would be easier to use the 3 drives straight, with no raid and have:
HD 1: OS and Apps. No samples at all.
HD2: Audio Files for Logic projects
HD3: Reason, Ableton, Logic etc instrument sample library
HD4: Video and bouncing.
Which is what I ended up doing although I use HD4 as an interchangeable backup for HD1 and 2.
There is no universal answer to this as each must make their own choice based on their preferences and needs. Mirrored will give you full backup but on-site, in machine backup. Not much good if something untoward and drastic happens to the physical machine. I think a few people toy with striped RAID but fall on the side of using the drives straight, as in their projects they don't see a big enough gain over splitting the data across your 3 remaining drives without RAID. Studios that seriously consider raid often go out and get a dedicated raid that can offer more variations than raid 0 or raid 1 (Striped and Mirrored) and better throughput.
I hope this helps a little and not just added to the dilemma.

PT8 Neo SATA Raid Configuration Utility

I recently upgraded my system which was running a AMD athlon 1.2GHZ processor and only 128mb SDRAM. The system was stable and running windows XP home edition.
I upgraded to the PT8 Neo motherboard which supports SATA hard drives. I was expecting a dramatic increase when I upgraded my system to the new P4 800mhz FSB 3.0GB processor and 512MB DDR 400mhz ram.
I was still using my WD 60GB EIDE Hard Drive when I upgraded the Motherboard, Ram, & Processor. The upgrade went smoothly and system worked without glitches.
Unsatisfied with the increase in performance, I also purchased a Western Digital Raptor 74GB 10000 RPM hard drive using the SATA interface cable.
I have updated the bios of the motherboard and updated the driver for the SATA raid controller using Live Bios Update 3.
I am having 2 problems:
Problem 1. When I enter the bios for the SATA Raid configuration utility after the initial post by pressing , none of the selections are available. I move my arrows down but nothing highlights and I can't select anything in the configuration utility except ESC key to exit.
The SATA controller is enabled in the BIOS.
The initial SATA Raid Configuration displayed immediately after the post, does show the hard drive.
I want to be able to boot from the new WD Raptor Hard Drive and transfer all the existing files from the IDE Drive to the SATA drive, but I can't seem to get the drive to initialize, format, fdisk, etc.
Problem 2. Windows XP doesn't have enough resources available to activate the VIA Serial ATA RAID Controller in Device Manager. It shows a Yellow ! and returns a code 12 (This device cannot find enough free resources that it can use). I have tried disabling several items in the bios including LAN support, On board Sound but nothing seems to work.
Keep in mind, I have downloaded the latest bios, latest drivers, etc.
The rest of the components on my machine are as follows:
1. Custom Built Computer (Non-Branded)
2. 60GB Western Digital 7200 RPM IDE Hard Drive on IDE0 (Master)
3. DVD Rom on IDE0 (Slave)
4. MSI 52x32x52x CDRW on IDE1 (Master)
5. Zip 100 IDE Drive (Slave)
6. Floppy Drive
7. Pentium 4 3.0GZ 800mhz FSB
8. 512mb DDR 400mhz Memory
9. ATI All-In-Wonder PCI Video Card
10. SIIG Firewire controller
I have already tried removing the SIIG firewire controller thinking that it was getting in the way of available resources. That did not work.
I have invested alot of money on this system, I wanted the best and have always used MSI motherboards because of their stability and reliability.
Please help as soon as possible.
Thanks

first off you are only using one SATA so no option are avalible in Raid Bios
in order to install windows the safe way detach your 60ata hrad drive plug in the raptor and install windows then Press F6 at the begining the you will have to the SATA diskett in the floppy drive in stall SATA windows drivers continue with install.
once you are fished Windows, drivers then shut down and plug in your ATA hard drive turn on your PC enter the bios navagate to the Advanceed BIOS Features/Boot Sequency selected your SATA raid drive as First boot then CD roms as second. then your done boot in to windows

When i open programs as NetBeans my mac shuts down, and then i can't boot it

Okay so to be more precise, about 1-2 months ago my mac started to do weird things. Whenever i opened webcam or some other programs my mac shuts down, and then i would not be able to boot it up again, so i had to try to boot it in safe mode, resest NVRAM and all of that.
If i try to boot it up normally it starts fine with the apple logo, then its changing into a clean white/grey screen, and if i try to boot it up in safe mode it becomes blue.
The funny thing is if i keep to try to boot it, then it will eventually boot up, but still i can't use my programs for school (For an example NetBeans for my programming)
At first i thought it was my harddrive, so i bought a 120GB SSD Samsung EVO and installed Snow Leopard. But it still ****** up (Tried to update it to Maverick, still didn't do anything)
So i'm out of ideas of what to do.. Please help
(I have a MacBook Pro Mid 2010)
Sincerely,
Frederik Bang

This is from step 1
8/19/14 12:06:04.000 bootlog[0]: BOOT_TIME 1408442764 0
8/16/14 22:44:57.293 WindowServer[105]: CGXDisplayDidWakeNotification [31138563430987]: posting kCGSDisplayDidWake
8/19/14 12:06:05.000 syslogd[17]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
8/16/14 22:44:57.294 WindowServer[105]: handle_will_sleep_auth_and_shield_windows: NULL shield_window (lock state: 1)
8/19/14 12:06:05.000 syslogd[17]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
8/16/14 22:44:58.059 AirPlayUIAgent[201]: 2014-08-16 10:44:58.059243 PM [AirPlayUIAgent] Changed PIN pairing: no
8/19/14 12:06:05.000 syslogd[17]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
8/16/14 22:44:58.082 AirPlayUIAgent[201]: 2014-08-16 10:44:58.081511 PM [AirPlayUIAgent] Changed PIN pairing: no
8/19/14 12:06:05.000 syslogd[17]: Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
8/19/14 12:06:05.000 syslogd[17]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
8/19/14 12:06:05.000 syslogd[17]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
8/19/14 12:06:05.000 syslogd[17]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
8/19/14 12:06:05.000 syslogd[17]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
8/19/14 12:06:05.000 syslogd[17]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
8/19/14 12:06:05.000 syslogd[17]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
8/19/14 12:06:05.000 syslogd[17]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
8/19/14 12:06:05.000 syslogd[17]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
8/19/14 12:06:05.000 syslogd[17]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
8/19/14 12:06:05.000 syslogd[17]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
8/19/14 12:06:05.000 syslogd[17]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
8/19/14 12:06:05.000 syslogd[17]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
8/19/14 12:06:05.000 syslogd[17]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
8/19/14 12:06:05.000 kernel[0]: Longterm timer threshold: 1000 ms
8/19/14 12:06:05.000 kernel[0]: PMAP: PCID enabled
8/19/14 12:06:05.000 kernel[0]: Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
8/19/14 12:06:05.000 kernel[0]: vm_page_bootstrap: 924365 free pages and 116019 wired pages
8/19/14 12:06:05.000 kernel[0]: kext submap [0xffffff7f807a9000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a9000]
8/19/14 12:06:05.000 kernel[0]: zone leak detection enabled
8/19/14 12:06:05.000 kernel[0]: "vm_compressor_mode" is 4
8/19/14 12:06:05.000 kernel[0]: standard timeslicing quantum is 10000 us
8/19/14 12:06:05.000 kernel[0]: standard background quantum is 2500 us
8/19/14 12:06:05.000 kernel[0]: mig_table_max_displ = 74
8/19/14 12:06:05.000 kernel[0]: TSC Deadline Timer supported and enabled
8/19/14 12:06:05.000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
8/19/14 12:06:05.000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
8/19/14 12:06:05.000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
8/19/14 12:06:05.000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
8/19/14 12:06:05.000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
8/19/14 12:06:05.000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
8/19/14 12:06:05.000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
8/19/14 12:06:05.000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
8/19/14 12:06:05.000 kernel[0]: calling mpo_policy_init for TMSafetyNet
8/19/14 12:06:05.000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
8/19/14 12:06:05.000 kernel[0]: calling mpo_policy_init for Sandbox
8/19/14 12:06:05.000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
8/19/14 12:06:05.000 kernel[0]: calling mpo_policy_init for Quarantine
8/19/14 12:06:05.000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
8/19/14 12:06:05.000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
8/19/14 12:06:05.000 kernel[0]: The Regents of the University of California. All rights reserved.
8/19/14 12:06:05.000 kernel[0]: MAC Framework successfully initialized
8/19/14 12:06:05.000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
8/19/14 12:06:05.000 kernel[0]: AppleKeyStore starting (BUILT: Jun 3 2014 21:40:51)
8/19/14 12:06:05.000 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
8/19/14 12:06:05.000 kernel[0]: ACPI: sleep states S3 S4 S5
8/19/14 12:06:05.000 kernel[0]: pci (build 21:30:51 Jun 3 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
8/19/14 12:06:05.000 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 88AB
8/19/14 12:06:05.000 kernel[0]: AppleIntelCPUPowerManagement: (built 21:36:10 Jun 3 2014) initialization complete
8/19/14 12:06:05.000 kernel[0]: [ PCI configuration begin ]
8/19/14 12:06:05.000 kernel[0]: console relocated to 0xf90010000
8/19/14 12:06:05.000 kernel[0]: [ PCI configuration end, bridges 12, devices 18 ]
8/19/14 12:06:05.000 kernel[0]: mcache: 8 CPU(s), 64 bytes CPU cache line size
8/19/14 12:06:05.000 kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
8/19/14 12:06:05.000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
8/19/14 12:06:05.000 kernel[0]: rooting via boot-uuid from /chosen: 954CD513-4F88-37E4-AAC0-40A2EB5EF706
8/19/14 12:06:05.000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
8/19/14 12:06:05.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
8/19/14 12:06:05.000 kernel[0]: com.apple.AppleFSCompressionTypeLZVN kmod start
8/19/14 12:06:05.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
8/19/14 12:06:05.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
8/19/14 12:06:05.000 kernel[0]: com.apple.AppleFSCompressionTypeLZVN load succeeded
8/19/14 12:06:05.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
8/19/14 12:06:05.000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
8/19/14 12:06:05.000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Samsung SSD 840 EVO 120GB Media/IOGUIDPartitionScheme/MacBook Pro SSD@2
8/19/14 12:06:05.000 kernel[0]: BSD root: disk0s2, major 1, minor 2
8/19/14 12:06:05.000 kernel[0]: jnl: b(1, 2): replay_journal: from: 4111872 to: 8367104 (joffset 0x37e000)
8/19/14 12:06:05.000 kernel[0]: BTCOEXIST off
8/19/14 12:06:05.000 kernel[0]: BRCM tunables:
8/19/14 12:06:05.000 kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[   32] reapcount[ 128]
8/19/14 12:06:05.000 kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 70cd60fffedafe78; max speed s800.
8/19/14 12:06:05.000 kernel[0]: FWOHCI : enableCycleSync - enabled count going negative?!?
8/19/14 12:06:05.000 kernel[0]: jnl: b(1, 2): journal replay done.
8/19/14 12:06:05.000 kernel[0]: hfs: mounted MacBook Pro SSD on device root_device
8/19/14 12:06:05.000 kernel[0]: Thunderbolt Self-Reset Count = 0xedefbe00
8/19/14 12:06:05.000 kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
8/19/14 12:06:04.554 com.apple.launchd[1]: *** launchd[1] has started up. ***
8/19/14 12:06:04.554 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
8/19/14 12:06:05.428 com.apple.SecurityServer[14]: Session 100000 created
8/19/14 12:06:05.509 opendirectoryd[21]: sandbox cache error 11: database disk image is malformed
8/19/14 12:06:05.000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
8/19/14 12:06:05.000 kernel[0]: IO80211Interface::efiNVRAMPublished():
8/19/14 12:06:05.674 com.apple.SecurityServer[14]: Entering service
8/19/14 12:06:05.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
8/19/14 12:06:05.753 configd[18]: network changed.
8/19/14 12:06:05.755 configd[18]: setting hostname to "Frederik-Bangs-MacBook-Pro.local"
8/19/14 12:06:05.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
8/19/14 12:06:05.809 UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
8/19/14 12:06:05.000 kernel[0]: AGC: 3.6.22, HW version=1.9.23, flags:0, features:20600
8/19/14 12:06:05.000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
8/19/14 12:06:05.000 kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
8/19/14 12:06:05.000 kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
8/19/14 12:06:05.000 kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
8/19/14 12:06:05.000 kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
8/19/14 12:06:05.000 kernel[0]: Previous Shutdown Cause: 3
8/19/14 12:06:05.000 kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
8/19/14 12:06:05.000 kernel[0]: IOBluetoothUSBDFU::probe
8/19/14 12:06:05.000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0042
8/19/14 12:06:05.000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xf800 ****
8/19/14 12:06:05.000 kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xf800 ****
8/19/14 12:06:05.930 UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
8/19/14 12:06:05.000 kernel[0]: init
8/19/14 12:06:05.000 kernel[0]: probe
8/19/14 12:06:05.000 kernel[0]: start
8/19/14 12:06:05.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xf800
8/19/14 12:06:05.000 kernel[0]: [IOBluetoothHCIController][start] -- completed
8/19/14 12:06:05.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
8/19/14 12:06:05.000 kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0xa6c0 -- 0xa800 -- 0xf800 ****
8/19/14 12:06:06.000 kernel[0]: DSMOS has arrived
8/19/14 12:06:06.000 kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6741
8/19/14 12:06:06.000 kernel[0]: fGPUIdleIntervalMS = 0
8/19/14 12:06:07.000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xf800 ****
8/19/14 12:06:08.000 kernel[0]: VM Swap Subsystem is ON
8/19/14 12:06:08.613 hidd[70]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
8/19/14 12:06:08.615 hidd[70]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
8/19/14 12:06:08.696 com.apple.usbmuxd[47]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
8/19/14 12:06:08.723 mDNSResponder[62]: mDNSResponder mDNSResponder-522.92.1 (Jun 3 2014 12:57:56) starting OSXVers 13
8/19/14 12:06:08.783 revisiond[55]: "/.vol/16777218/2/.DocumentRevisions-V100/.cs/ChunkStorage/0/0/0/1" does not exist, rowID:1
8/19/14 12:06:08.784 revisiond[55]: There was a problem compacting SF ftRowId:1, rc:-1
8/19/14 12:06:08.797 mds[61]: (Normal) FMW: FMW 0 0
8/19/14 12:06:08.799 loginwindow[65]: Login Window Application Started
8/19/14 12:06:08.888 systemkeychain[88]: done file: /var/run/systemkeychaincheck.done
8/19/14 12:06:08.890 apsd[82]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
8/19/14 12:06:08.899 configd[18]: network changed.
8/19/14 12:06:08.900 configd[18]: network changed: DNS*
8/19/14 12:06:08.904 mDNSResponder[62]: D2D_IPC: Loaded
8/19/14 12:06:08.904 mDNSResponder[62]: D2DInitialize succeeded
8/19/14 12:06:08.908 mDNSResponder[62]:   4: Listening for incoming Unix Domain Socket client requests
8/19/14 12:06:08.955 WindowServer[90]: Server is starting up
8/19/14 12:06:08.957 networkd[106]: networkd.106 built Aug 24 2013 22:08:46
8/19/14 12:06:08.971 WindowServer[90]: Session 256 retained (2 references)
8/19/14 12:06:08.971 WindowServer[90]: Session 256 released (1 references)
8/19/14 12:06:09.017 WindowServer[90]: Session 256 retained (2 references)
8/19/14 12:06:09.020 WindowServer[90]: init_page_flip: page flip mode is on
8/19/14 12:06:09.060 digest-service[92]: label: default
8/19/14 12:06:09.061 digest-service[92]: dbname: od:/Local/Default
8/19/14 12:06:09.061 digest-service[92]: mkey_file: /var/db/krb5kdc/m-key
8/19/14 12:06:09.061 digest-service[92]: acl_file: /var/db/krb5kdc/kadmind.acl
8/19/14 12:06:09.242 digest-service[92]: digest-request: uid=0
8/19/14 12:06:09.290 awacsd[80]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
8/19/14 12:06:09.393 awacsd[80]: InnerStore CopyAllZones: no info in Dynamic Store
8/19/14 12:06:09.454 digest-service[92]: digest-request: netr probe 0
8/19/14 12:06:09.455 digest-service[92]: digest-request: init request
8/19/14 12:06:09.465 digest-service[92]: digest-request: init return domain: BUILTIN server: FREDERIK-BANGS-MACBOOK-PRO indomain was: <NULL>
8/19/14 12:06:09.620 airportd[84]: airportdProcessDLILEvent: en1 attached (up)
8/19/14 12:06:09.000 kernel[0]: createVirtIf(): ifRole = 1
8/19/14 12:06:09.000 kernel[0]: in func createVirtualInterface ifRole = 1
8/19/14 12:06:09.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1
8/19/14 12:06:09.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
8/19/14 12:06:09.000 kernel[0]: Created virtif 0xffffff801c450400 p2p0
8/19/14 12:06:09.642 aosnotifyd[83]: assertion failed: 13E28: liblaunch.dylib + 25164 [A40A0C7B-3216-39B4-8AE0-B5D3BAF1DA8A]: 0x25
8/19/14 12:06:09.670 locationd[67]: NBB-Could not get UDID for stable refill timing, falling back on random
8/19/14 12:06:09.726 locationd[67]: Location icon should now be in state 'Inactive'
8/19/14 12:06:09.728 locationd[67]: locationd was started after an unclean shutdown
8/19/14 12:06:10.294 WindowServer[90]: Found 39 modes for display 0x00000000 [39, 0]
8/19/14 12:06:10.309 WindowServer[90]: Found 1 modes for display 0x00000000 [1, 0]
8/19/14 12:06:10.326 WindowServer[90]: Found 1 modes for display 0x00000000 [1, 0]
8/19/14 12:06:10.327 WindowServer[90]: Found 1 modes for display 0x00000000 [1, 0]
8/19/14 12:06:10.343 WindowServer[90]: mux_initialize: Mode is dynamic
8/19/14 12:06:10.349 WindowServer[90]: Found 39 modes for display 0x00000000 [39, 0]
8/19/14 12:06:10.354 WindowServer[90]: Found 1 modes for display 0x00000000 [1, 0]
8/19/14 12:06:10.355 WindowServer[90]: Found 1 modes for display 0x00000000 [1, 0]
8/19/14 12:06:10.390 WindowServer[90]: WSMachineUsesNewStyleMirroring: false
8/19/14 12:06:10.391 WindowServer[90]: Display 0x04272902: GL mask 0x5; bounds (0, 0)[1440 x 900], 39 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca4, S/N 0, Unit 2, Rotation 0
UUID 0x8a96a568c33550779a382c64e81094d2
8/19/14 12:06:10.392 WindowServer[90]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[4096 x 2160], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
8/19/14 12:06:10.392 WindowServer[90]: Display 0x003f0040: GL mask 0x10; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
8/19/14 12:06:10.392 WindowServer[90]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
8/19/14 12:06:10.396 WindowServer[90]: WSSetWindowTransform: Singular matrix
8/19/14 12:06:10.396 WindowServer[90]: WSSetWindowTransform: Singular matrix
8/19/14 12:06:10.403 WindowServer[90]: Display 0x04272902: GL mask 0x5; bounds (0, 0)[1440 x 900], 39 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca4, S/N 0, Unit 2, Rotation 0
UUID 0x8a96a568c33550779a382c64e81094d2
8/19/14 12:06:10.403 WindowServer[90]: Display 0x003f003d: GL mask 0x2; bounds (2464, 0)[1 x 1], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
8/19/14 12:06:10.404 WindowServer[90]: Display 0x003f0040: GL mask 0x10; bounds (2465, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
8/19/14 12:06:10.404 WindowServer[90]: Display 0x003f003f: GL mask 0x8; bounds (2466, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
8/19/14 12:06:10.404 WindowServer[90]: CGXPerformInitialDisplayConfiguration
8/19/14 12:06:10.404 WindowServer[90]:   Display 0x04272902: Unit 2; Alias(2, 0x5); Vendor 0x610 Model 0x9ca4 S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (0,0)[1440 x 900], Rotation 0, Resolution 1
8/19/14 12:06:10.404 WindowServer[90]:   Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2464,0)[1 x 1], Rotation 0, Resolution 1
8/19/14 12:06:10.404 WindowServer[90]:   Display 0x003f0040: Unit 4; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2465,0)[1 x 1], Rotation 0, Resolution 1
8/19/14 12:06:10.404 WindowServer[90]:   Display 0x003f003f: Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2466,0)[1 x 1], Rotation 0, Resolution 1
8/19/14 12:06:10.404 WindowServer[90]: CGXMuxBoot: Boot normal
8/19/14 12:06:10.000 kernel[0]: en1: 802.11d country code set to 'DK'.
8/19/14 12:06:10.000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
8/19/14 12:06:10.518 WindowServer[90]: GLCompositor: GL renderer id 0x01024301, GL mask 0x00000003, accelerator 0x00004d2f, unit 0, caps QEX|MIPMAP, vram 451 MB
8/19/14 12:06:10.520 WindowServer[90]: GLCompositor: GL renderer id 0x01024301, GL mask 0x00000003, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
8/19/14 12:06:10.520 WindowServer[90]: GLCompositor: GL renderer id 0x01021b06, GL mask 0x0000001c, accelerator 0x000036b3, unit 2, caps QEX|MIPMAP, vram 1024 MB
8/19/14 12:06:10.522 WindowServer[90]: GLCompositor: GL renderer id 0x01021b06, GL mask 0x0000001c, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
8/19/14 12:06:10.523 WindowServer[90]: GLCompositor enabled for tile size [256 x 256]
8/19/14 12:06:10.523 WindowServer[90]: CGXGLInitMipMap: mip map mode is on
8/19/14 12:06:10.536 loginwindow[65]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
8/19/14 12:06:11.103 WindowServer[90]: Display 0x04272902: Unit 2; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
8/19/14 12:06:11.129 launchctl[123]: com.apple.findmymacmessenger: Already loaded
8/19/14 12:06:11.210 com.apple.SecurityServer[14]: Session 100005 created
8/19/14 12:06:11.335 loginwindow[65]: Setting the initial value of the magsave brightness level 1
8/19/14 12:06:11.374 loginwindow[65]: Login Window Started Security Agent
8/19/14 12:06:11.499 UserEventAgent[125]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
8/19/14 12:06:11.506 SecurityAgent[132]: This is the first run
8/19/14 12:06:11.506 SecurityAgent[132]: MacBuddy was run = 0
8/19/14 12:06:11.522 SecurityAgent[132]: User info context values set for frederikbang
8/19/14 12:06:11.527 WindowServer[90]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04272902 device: 0x7fdd1400e310 isBackBuffered: 1 numComp: 3 numDisp: 3
8/19/14 12:06:11.528 WindowServer[90]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7fdd1400e310) - enabling OpenGL
8/19/14 12:06:11.891 loginwindow[65]: Login Window - Returned from Security Agent
8/19/14 12:06:11.936 loginwindow[65]: USER_PROCESS: 65 console
8/19/14 12:06:11.000 kernel[0]: MacAuthEvent en1   Auth result for: 00:1f:ca:2e:0d:5e MAC AUTH succeeded
8/19/14 12:06:11.000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
8/19/14 12:06:11.000 kernel[0]: AirPort: Link Up on en1
8/19/14 12:06:11.000 kernel[0]: en1: BSSID changed to 00:1f:ca:2e:0d:5e
8/19/14 12:06:12.000 kernel[0]: AppleKeyStore:Sending lock change 0
8/19/14 12:06:12.147 com.apple.launchd.peruser.501[136]: Background: Aqua: Registering new GUI session.
8/19/14 12:06:12.173 com.apple.launchd.peruser.501[136]: (com.apple.EscrowSecurityAlert) Unknown key: seatbelt-profiles
8/19/14 12:06:12.175 com.apple.launchd.peruser.501[136]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
8/19/14 12:06:12.180 launchctl[138]: com.apple.pluginkit.pkd: Already loaded
8/19/14 12:06:12.180 launchctl[138]: com.apple.sbd: Already loaded
8/19/14 12:06:12.194 distnoted[140]: # distnote server agent absolute time: 8.479032290   civil time: Tue Aug 19 12:06:12 2014   pid: 140 uid: 501 root: no
8/19/14 12:06:12.195 distnoted[140]: assertion failed: 13E28: liblaunch.dylib + 25164 [A40A0C7B-3216-39B4-8AE0-B5D3BAF1DA8A]: 0x25
8/19/14 12:06:12.000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
8/19/14 12:06:12.361 WindowServer[90]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
8/19/14 12:06:12.397 WindowServer[90]: Received display connect changed for display 0x4272902
8/19/14 12:06:12.407 WindowServer[90]: Found 15 modes for display 0x04272902 [15, 0]
8/19/14 12:06:12.418 WindowServer[90]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
8/19/14 12:06:12.423 WindowServer[90]: CGXMuxAcknowledge: Posting glitchless acknowledge
8/19/14 12:06:12.437 WindowServer[90]: Received display connect changed for display 0x4272902
8/19/14 12:06:12.438 WindowServer[90]: Found 1 modes for display 0x04272902 [1, 0]
8/19/14 12:06:12.439 WindowServer[90]: Received display connect changed for display 0x3f003f
8/19/14 12:06:12.439 WindowServer[90]: Found 1 modes for display 0x003f003f [1, 0]
8/19/14 12:06:12.439 WindowServer[90]: Received display connect changed for display 0x3f0040
8/19/14 12:06:12.440 WindowServer[90]: Found 1 modes for display 0x003f0040 [1, 0]
8/19/14 12:06:12.578 launchproxyls[143]: Waiting for Launch Services seeding, UID 501
8/19/14 12:06:12.627 airportd[84]: _doAutoJoin: Already associated to “HBWIFI”. Bailing on auto-join.
8/19/14 12:06:12.000 kernel[0]: Sandbox: fontworker(146) deny file-read-data /Applications/Automator.app/Contents
8/19/14 12:06:12.713 coresymbolicationd[150]: /System/Library/Caches/com.apple.coresymbolicationd/data did not validate, resetting cache
8/19/14 12:06:12.755 WindowServer[90]: Display 0x04272902: Unit 2; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
8/19/14 12:06:12.773 mds[61]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
8/19/14 12:06:12.783 WindowServer[90]: Display 0x04272902: Unit 2; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
8/19/14 12:06:12.815 WindowServer[90]: Display 0x04272902: Unit 2; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
8/19/14 12:06:13.303 sandboxd[149]: ([146]) fontworker(146) deny file-read-data /Applications/App Store.app
8/19/14 12:06:13.379 sandboxd[149]: ([146]) fontworker(146) deny file-read-data /Applications/App Store.app/Contents
8/19/14 12:06:13.435 UserEventAgent[139]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
8/19/14 12:06:13.456 sandboxd[149]: ([146]) fontworker(146) deny file-read-data /Applications/App Store.app/Contents/PkgInfo
8/19/14 12:06:13.507 sandboxd[149]: ([146]) fontworker(146) deny file-read-data /Applications/App Store.app/Contents/MacOS/App Store
8/19/14 12:06:13.687 sandboxd[149]: ([146]) fontworker(146) deny file-read-data /Applications/App Store.app/Contents/MacOS/App Store/..namedfork/rsrc
8/19/14 12:06:13.738 sandboxd[149]: ([146]) fontworker(146) deny file-read-data /Applications/App Store.app/Contents/PlugIns
8/19/14 12:06:13.790 sandboxd[149]: ([146]) fontworker(146) deny file-read-data /Applications/App Store.app/Contents/PlugIns
8/19/14 12:06:13.850 sandboxd[149]: ([146]) fontworker(146) deny file-read-data /Applications/Automator.app
8/19/14 12:06:15.418 com.apple.launchd.peruser.501[136]: ([email protected][175]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
8/19/14 12:06:15.418 com.apple.launchd.peruser.501[136]: ([email protected][175]) Job failed to exec(3) for weird reason: 2
8/19/14 12:06:15.676 com.apple.SecurityServer[14]: Session 100008 created
8/19/14 12:06:15.000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=174[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
8/19/14 12:06:15.800 accountsd[187]: assertion failed: 13E28: liblaunch.dylib + 25164 [A40A0C7B-3216-39B4-8AE0-B5D3BAF1DA8A]: 0x25
8/19/14 12:06:16.076 sharingd[189]: Starting Up...
8/19/14 12:06:16.119 mds[61]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
8/19/14 12:06:16.152 revisiond[55]: objc[55]: Class GSLockToken is implemented in both /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Supp ort/revisiond and /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Gene rationalStorage. One of the two will be used. Which one is undefined.
8/19/14 12:06:16.458 com.apple.SecurityServer[14]: Session 100007 created
8/19/14 12:06:16.602 apsd[82]: Unexpected connection from logged out uid 501
8/19/14 12:06:16.630 imagent[165]: [Warning] Services all disappeared, removing all dependent devices
8/19/14 12:06:16.654 WiFiKeychainProxy[156]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineCreate: created...
8/19/14 12:06:16.655 WiFiKeychainProxy[156]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
8/19/14 12:06:16.681 imagent[165]: [Warning] Creating empty account: PlaceholderAccount for service: IMDService (iMessage)
8/19/14 12:06:16.682 imagent[165]: [Warning] Creating empty account: PlaceholderAccount for service: IMDService (iMessage)
8/19/14 12:06:17.127 com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelDevice.
8/19/14 12:06:17.128 com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelSharedUserClient.
8/19/14 12:06:17.128 com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDSIVideoContext.
8/19/14 12:06:17.128 com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class Gen6DVDContext.
8/19/14 12:06:17.128 com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelDevice.
8/19/14 12:06:17.128 com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelSharedUserClient.
8/19/14 12:06:17.128 com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.
8/19/14 12:06:17.128 com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMedia.
8/19/14 12:06:17.128 com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextVEBox.
8/19/14 12:06:17.129 com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
8/19/14 12:06:17.129 com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOHIDParamUserClient.
8/19/14 12:06:17.129 com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOSurfaceRootUserClient.
8/19/14 12:06:17.129 com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.AirPlayXPCHelper.
8/19/14 12:06:17.129 com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.blued.
8/19/14 12:06:17.215 com.apple.audio.DriverHelper[201]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
8/19/14 12:06:17.215 com.apple.audio.DriverHelper[201]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.blued.
8/19/14 12:06:17.215 com.apple.audio.DriverHelper[201]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
8/19/14 12:06:17.360 SystemUIServer[178]: Cannot find executable for CFBundle 0x7f92f3e180f0 </System/Library/CoreServices/Menu Extras/Clock.menu> (not loaded)
8/19/14 12:06:17.361 com.apple.IconServicesAgent[205]: IconServicesAgent launched.
8/19/14 12:06:17.385 SystemUIServer[178]: Cannot find executable for CFBundle 0x7f92f3c16c40 </System/Library/CoreServices/Menu Extras/Battery.menu> (not loaded)
8/19/14 12:06:17.386 SystemUIServer[178]: Cannot find executable for CFBundle 0x7f92f3d546c0 </System/Library/CoreServices/Menu Extras/Volume.menu> (not loaded)
8/19/14 12:06:17.813 secd[194]: __EnsureFreshParameters_block_invoke_2 SOSCloudKeychainSynchronizeAndWait: The operation couldn’t be completed. (SyncedDefaults error 1025 - Remote error : No valid account for KVS)
8/19/14 12:06:17.814 secd[194]: __talkWithKVS_block_invoke callback error: The operation couldn’t be completed. (SyncedDefaults error 1025 - Remote error : No valid account for KVS)
8/19/14 12:06:17.820 secd[194]: CFPropertyListReadFromFile file file:///Users/frederikbang/Library/Keychains/087BC3B2-426E-5653-8D2E-D6A8AA2B3D B2/accountStatus.plist: The file “accountStatus.plist” couldn’t be opened because there is no such file.
8/19/14 12:06:17.834 secd[194]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
8/19/14 12:06:17.834 secd[194]: securityd_xpc_dictionary_handler WiFiKeychainProx[156] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
8/19/14 12:06:17.847 soagent[159]: [Warning] Services all disappeared, removing all dependent devices
8/19/14 12:06:17.896 SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
8/19/14 12:06:17.897 SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
8/19/14 12:06:17.948 soagent[159]: No active accounts, killing soagent in 10 seconds
8/19/14 12:06:17.951 soagent[159]: No active accounts, killing soagent in 10 seconds
8/19/14 12:06:18.362 com.apple.time[139]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/19/14 12:06:18.375 com.apple.dock.extra[207]: No endpoint returned trying to load UnreadCountController.bundle, suspending
8/19/14 12:06:18.381 com.apple.time[139]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/19/14 12:06:19.092 Dropbox[180]: PyObjCPointer created: at 0xcc9fc88 of type {OpaqueJSContext=}
8/19/14 12:06:19.441 UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'HBWIFI' not making interface primary (no cache entry)
8/19/14 12:06:19.441 configd[18]: network changed: DNS* Proxy
8/19/14 12:06:19.442 UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
8/19/14 12:06:19.442 UserEventAgent[11]: Captive: en1: Probing 'HBWIFI'
8/19/14 12:06:19.477 UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
8/19/14 12:06:19.481 configd[18]: network changed: v4(en1!:10.128.245.164) DNS+ Proxy+ SMB+
8/19/14 12:06:19.834 com.apple.IconServicesAgent[205]: main Failed to composit image for binding VariantBinding [0x2ef] flags: 0x8 binding: FileInfoBinding [0x10f] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: ????.
8/19/14 12:06:19.835 quicklookd[208]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: ???? request size:128 scale: 1
8/19/14 12:06:20.075 com.apple.IconServicesAgent[205]: main Failed to composit image for binding VariantBinding [0x111] flags: 0x8 binding: FileInfoBinding [0x2f1] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: WXBN.
8/19/14 12:06:20.076 quicklookd[208]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x403] flags: 0x8 binding: FileInfoBinding [0x303] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: WXBN request size:128 scale: 1
8/19/14 12:06:21.000 kernel[0]: fsevents: watcher dbfseventsd (pid: 232) - Using /dev/fsevents directly is unsupported. Migrate to FSEventsFramework
8/19/14 12:06:22.019 Dropbox[180]: ICARegisterForEventNotification-Has been deprecated since 10.5. Calls to this function in the future may crash this application. Please move to ImageCaptureCore
8/19/14 12:06:22.719 AirPlayUIAgent[204]: 2014-08-19 12:06:22.717865 PM [AirPlayUIAgent] Changed PIN pairing: no
8/19/14 12:06:22.728 AirPlayUIAgent[204]: 2014-08-19 12:06:22.728281 PM [AirPlayUIAgent] Changed PIN pairing: no
8/19/14 12:06:24.394 awacsd[80]: Exiting
8/19/14 12:06:26.000 kernel[0]: Sandbox: storeagent(247) deny file-write-unlink /Users/frederikbang/Library/Application Support/AppStore/manifest.plist
8/19/14 12:06:26.000 kernel[0]: Sandbox: storeagent(247) deny file-write-unlink /Users/frederikbang/Library/Application Support/AppStore/manifest.plist
8/19/14 12:06:26.200 storeagent[247]: DownloadManifest: Error moving legacy manifest - Error Domain=NSCocoaErrorDomain Code=513 "“manifest.plist” kunne ikke flyttes, fordi du ikke har adgangstilladelser til “com.apple.appstore”." UserInfo=0x7ff57bd2af60 {NSSourceFilePathErrorKey=/Users/frederikbang/Library/Application Support/AppStore/manifest.plist, NSUserStringVariant=(
    Move
), NSDestinationFilePath=/var/folders/70/w5pc4f891jv0k41f86bd44380000gn/C/com.appl e.appstore/manifest.plist, NSFilePath=/Users/frederikbang/Library/Application Support/AppStore/manifest.plist, NSUnderlyingError=0x7ff57bd2adf0 "Handlingen kunne ikke udføres. Handling tillades ikke"}
8/19/14 12:06:26.000 kernel[0]: Sandbox: storeagent(247) deny file-write-unlink /Users/frederikbang/Library/Application Support/AppStore
8/19/14 12:06:26.000 kernel[0]: Sandbox: storeagent(247) deny file-read-data /Users/frederikbang/Library/Application Support/AppStore
8/19/14 12:06:26.218 storeagent[247]: DownloadManifest: Error removing legacy download location - Error Domain=NSCocoaErrorDomain Code=513 "“AppStore” kunne ikke fjernes, fordi du ikke har adgangstilladelser til det." UserInfo=0x7ff57bf2a4a0 {NSFilePath=/Users/frederikbang/Library/Application Support/AppStore, NSUserStringVariant=(
    Remove
), NSUnderlyingError=0x7ff57bf2cc90 "Handlingen kunne ikke udføres. Handling tillades ikke"}
8/19/14 12:06:26.348 parentalcontrolsd[248]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
8/19/14 12:06:28.179 soagent[159]: Killing soagent.
8/19/14 12:06:28.180 com.apple.dock.extra[207]: SOHelperCenter main connection interrupted
8/19/14 12:06:28.180 NotificationCenter[162]: SOHelperCenter main connection interrupted
8/19/14 12:06:28.181 imagent[165]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver (soagent:159)
8/19/14 12:06:28.181 imagent[165]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver (soagent:159)
8/19/14 12:06:38.159 launchproxyls[143]: Launch Services seeding complete
8/19/14 12:06:43.523 mds_stores[105]: (Error) SecureStore: Access token 3 changed uid from -1 to 501
8/19/14 12:06:44.242 distnoted[266]: assertion failed: 13E28: liblaunch.dylib + 25164 [A40A0C7B-3216-39B4-8AE0-B5D3BAF1DA8A]: 0x25
8/19/14 12:06:44.338 mdworker[264]: sandbox cache error 3850
8/19/14 12:06:44.414 mdworker[263]: sandbox cache error 3850
8/19/14 12:06:44.541 mdworker[265]: sandbox cache error 3850
8/19/14 12:06:44.927 mdworker[256]: sandbox cache error 3850
8/19/14 12:06:49.637 root[273]: on_wire failed for server 17.72.148.52!
8/19/14 12:06:49.638 root[273]: on_wire failed for server 17.72.148.53!
8/19/14 12:06:49.734 ntpd[44]: proto: precision = 1.000 usec
8/19/14 12:06:54.173 com.apple.SecurityServer[14]: Session 100012 created
8/19/14 12:07:04.051 digest-service[92]: digest-request: uid=0
8/19/14 12:07:04.052 digest-service[92]: digest-request: init request
8/19/14 12:07:04.055 digest-service[92]: digest-request: init return domain: MACBOOKPRO-C0FE server: FREDERIK-BANGS-MACBOOK-PRO indomain was: <NULL>
8/19/14 12:07:04.000 kernel[0]: Sandbox: netbiosd(223) deny mach-lookup com.apple.networkd
8/19/14 12:07:04.081 digest-service[92]: digest-request: uid=0
8/19/14 12:07:04.082 digest-service[92]: digest-request: init request
8/19/14 12:07:04.085 digest-service[92]: digest-request: init return domain: MACBOOKPRO-C0FE server: FREDERIK-BANGS-MACBOOK-PRO indomain was: <NULL>
8/19/14 12:07:05.000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key B0PS (kSMCKeyNotFound)
8/19/14 12:07:05.000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key B0OS (kSMCKeyNotFound)
8/19/14 12:07:30.113 netbiosd[223]: name servers down?
8/19/14 12:09:25.522 SystemUIServer[178]: It does not make sense to draw an image when [NSGraphicsContext currentContext] is nil. This is a programming error. Break on void _NSWarnForDrawingImageWithNoCurrentContext() to debug. This will be logged only once. This may break in the future.
8/19/14 12:09:25.523 loginwindow[65]: magsafeStateChanged state changed old 1 new 2
8/19/14 12:09:52.053 loginwindow[65]: magsafeStateChanged state changed old 2 new 1
8/19/14 12:10:09.629 mds[61]: (Normal) Volume: volume:0x7fc02d818000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.gT5dd6
8/19/14 12:10:34.256 com.apple.IconServicesAgent[205]: main Failed to composit image for binding VariantBinding [0x175] flags: 0x8 binding: FileInfoBinding [0x27d] - extension: jpg, UTI: public.jpeg, fileType: ????.
8/19/14 12:10:34.256 quicklookd[306]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: jpg, UTI: public.jpeg, fileType: ???? request size:16 scale: 1
8/19/14 12:10:37.088 com.apple.IconServicesAgent[205]: main Failed to composit image for binding VariantBinding [0x27f] flags: 0x8 binding: FileInfoBinding [0x177] - extension: pptx, UTI: org.openxmlformats.presentationml.presentation, fileType: ????.
8/19/14 12:10:37.088 quicklookd[306]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x403] flags: 0x8 binding: FileInfoBinding [0x303] - extension: pptx, UTI: org.openxmlformats.presentationml.presentation, fileType: ???? request size:16 scale: 1
8/19/14 12:10:37.122 com.apple.IconServicesAgent[205]: main Failed to composit image for binding VariantBinding [0x281] flags: 0x8 binding: FileInfoBinding [0x3c3] - extension: pptm, UTI: org.openxmlformats.presentationml.presentation.macroenabled, fileType: ????.
8/19/14 12:10:37.123 quicklookd[306]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x603] flags: 0x8 binding: FileInfoBinding [0x503] - extension: pptm, UTI: org.openxmlformats.presentationml.presentation.macroenabled, fileType: ???? request size:16 scale: 1
8/19/14 12:10:37.195 com.apple.IconServicesAgent[205]: main Failed to composit image for binding VariantBinding [0x283] flags: 0x8 binding: FileInfoBinding [0x179] - extension: potx, UTI: org.openxmlformats.presentationml.template, fileType: ????.
8/19/14 12:10:37.195 quicklookd[306]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x803] flags: 0x8 binding: FileInfoBinding [0x703] - extension: potx, UTI: org.openxmlformats.presentationml.template, fileType: ???? request size:16 scale: 1
8/19/14 12:10:37.202 com.apple.IconServicesAgent[205]: main Failed to composit image for binding VariantBinding [0x285] flags: 0x8 binding: FileInfoBinding [0x3c5] - extension: png, UTI: public.png, fileType: PNGf.
8/19/14 12:10:37.203 quicklookd[306]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0xa03] flags: 0x8 binding: FileInfoBinding [0x903] - extension: png, UTI: public.png, fileType: PNGf request size:16 scale: 1
8/19/14 12:10:37.326 com.apple.SecurityServer[14]: Session 100016 created
8/19/14 12:10:37.380 com.apple.IconServicesAgent[205]: main Failed to composit image for binding VariantBinding [0x287] flags: 0x8 binding: FileInfoBinding [0x17b] - extension: (NULL), UTI: com.microsoft.waveform-audio, fileType: WAVE.
8/19/14 12:10:37.380 quicklookd[306]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0xc03] flags: 0x8 binding: FileInfoBinding [0xb03] - extension: (NULL), UTI: com.microsoft.waveform-audio, fileType: WAVE request size:16 scale: 1
8/19/14 12:10:38.590 com.apple.IconServicesAgent[205]: main Failed to composit image for binding VariantBinding [0x1ad] flags: 0x8 binding: FileInfoBinding [0x2c1] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: WXBN.
8/19/14 12:10:38.590 quicklookd[306]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0xe03] flags: 0x8 binding: FileInfoBinding [0xd03] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: WXBN request size:128 scale: 1
8/19/14 12:10:38.608 com.apple.IconServicesAgent[205]: main Failed to composit image for binding VariantBinding [0x303] flags: 0x8 binding: BundleBinding [0x2c3] URL: file:///System/Library/PreferencePanes/Bluetooth.prefPane bundle identifier: (null).
8/19/14 12:10:38.609 quicklookd[306]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x1003] flags: 0x8 binding: BundleBinding [0xf03] URL: file:///System/Library/PreferencePanes/Bluetooth.prefPane bundle identifier: (null) request size:64 scale: 1
8/19/14 12:10:38.613 com.apple.IconServicesAgent[205]: main Failed to composit image for binding VariantBinding [0x307] flags: 0x8 binding: BundleBinding [0x1b3] URL: file:///System/Library/PreferencePanes/AppStore.prefPane bundle identifier: (null).
8/19/14 12:10:38.614 quicklookd[306]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x1203] flags: 0x8 binding: BundleBinding [0x1103] URL: file:///System/Library/PreferencePanes/AppStore.prefPane bundle identifier: (null) request size:64 scale: 1
8/19/14 12:10:38.625 com.apple.IconServicesAgent[205]: main Failed to composit image for binding VariantBinding [0x1b7] flags: 0x8 binding: BundleBinding [0x30b] URL: file:///System/Library/PreferencePanes/Speech.prefPane bundle identifier: (null).
8/19/14 12:10:38.625 quicklookd[306]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x1403] flags: 0x8 binding: BundleBinding [0x1303] URL: file:///System/Library/PreferencePanes/Speech.prefPane bundle identifier: (null) request size:64 scale: 1
8/19/14 12:10:38.635 com.apple.IconServicesAgent[205]: main Failed to composit image for binding VariantBinding [0x2c9] flags: 0x8 binding: BundleBinding [0x30d] URL: file:///System/Library/PreferencePanes/DigiHubDiscs.prefPane bundle identifier: (null).
8/19/14 12:10:38.635 quicklookd[306]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x1603] flags: 0x8 binding: BundleBinding [0x1503] URL: file:///System/Library/PreferencePanes/DigiHubDiscs.prefPane bundle identifier: (null) request size:64 scale: 1
8/19/14 12:10:38.640 com.apple.IconServicesAgent[205]: main Failed to composit image for binding VariantBinding [0x311] flags: 0x8 binding: BundleBinding [0x2cd] URL: file:///System/Library/PreferencePanes/DateAndTime.prefPane bundle identifier: (null).
8/19/14 12:10:38.641 quicklookd[306]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x1803] flags: 0x8 binding: BundleBinding [0x1703] URL: file:///System/Library/PreferencePanes/DateAndTime.prefPane bundle identifier: (null) request size:64 scale: 1
8/19/14 12:10:38.647 com.apple.IconServicesAgent[205]: main Failed to composit image for binding VariantBinding [0x1bd] flags: 0x8 binding: BundleBinding [0x2cf] URL: file:///System/Library/PreferencePanes/SharingPref.prefPane bundle identifier: (null).
8/19/14 12:10:38.647 quicklookd[306]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x1a03] flags: 0x8 binding: BundleBinding [0x1903] URL: file:///System/Library/PreferencePanes/SharingPref.prefPane bundle identifier: (null) request size:64 scale: 1
8/19/14 12:10:38.653 com.apple.IconServicesAgent[205]: main Failed to composit image for binding VariantBinding [0x317] flags: 0x8 binding: BundleBinding [0x2d1] URL: file:///System/Library/PreferencePanes/Dock.prefPane bundle identifier: (null).
8/19/14 12:10:38.653 quicklookd[306]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x1c03] flags: 0x8 binding: BundleBinding [0x1b03] URL: file:///System/Library/PreferencePanes/Dock.prefPane bundle identifier: (null) request size:64 scale: 1
8/19/14 12:10:38.801 com.apple.IconServicesAgent[205]: main Failed to composit image for binding VariantBinding [0x2e3] flags: 0x8 binding: FileInfoBinding [0x329] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: WXBN.
8/19/14 12:10:38.801 quicklookd[306]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x1e03] flags: 0x8 binding: FileInfoBinding [0x1d03] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: WXBN request size:64 scale: 1
8/19/14 12:10:38.806 com.apple.IconServicesAgent[205]: main Failed to composit image for binding VariantBinding [0x2e5] flags: 0x8 binding: BundleBinding [0x1d1] URL: file:///System/Library/PreferencePanes/EnergySaver.prefPane bundle identifier: (null).
8/19/14 12:10:38.806 quicklookd[306]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x2003] flags: 0x8 binding: BundleBinding [0x1f03] URL: file:///System/Library/PreferencePanes/EnergySaver.prefPane bundle identifier: (null) request size:64 scale: 1
8/19/14 12:10:39.147 com.apple.IconServicesAgent[205]: main Failed to composit image for binding VariantBinding [0x2e7] flags: 0x8 binding: FileInfoBinding [0x32b] - extension: odt, UTI: org.oasis-open.opendocument.text, fileType: ????.
8/19/14 12:10:39.148 quicklookd[306]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x2203] flags: 0x8 binding: FileInfoBinding [0x2103] - extension: odt, UTI: org.oasis-open.opendocument.text, fileType: ???? request size:64 scale: 1
8/19/14 12:10:55.052 com.apple.time[139]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/19/14 12:10:55.000 kernel[0]: Sandbox: xpcd(25) deny ipc-posix-shm-read-data /tmp/com.apple.csseed.34
8/19/14 12:11:05.962 com.apple.time[139]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/19/14 12:11:18.022 com.apple.time[139]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/19/14 12:11:19.907 com.apple.time[139]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/19/14 12:12:08.987 Console[323]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
This is from step 2
In step 2 i can't find anything like .crash
I did it under Diagnostic and Usage Information --> System Diagnostic Reports.
There's a lot of PluginProcess and powerstats.
I even tried to filter with .crash and crash, but only 2 lines of something showed up when i tried "crash"

RAID configuration down and OS

Similar Messages

Maybe you are looking for