Raising Error in Screen

Hi,
I have a requirement to raise error in Screen(Module Pool) and again allow user to stay in the same screen.But if i raise error then it is throwing user directly out of transaction.
For example,if we see in VL02N we will get error while providing serial number during picking or packing but it will still allow user to stay in the same screen.But in my case i have customized VL02N and i am not able to raise error in the same way as it is throwing me out of transaction.
Is there any transaction to maintain Eror type based on application or is there any way to handle this as an exception at screen level.?
Please find attahement for the same.
Regards,
Venu

some message types will behave differently in a dialog transaction...there is a lot of info in the help on this
however, try using the addition
DISPLAY LIKE of the statement MESSAGE.
so, for example,
message 'my message' type 'S' display like 'E'.
try some different variants of the example above to give you the behaviour that fits best

Similar Messages

Cash Management - Open interface - raise error

in Cash Management - Bank Reconciliation, Open interface,
APPS.CE_999_PKG.clear
and
APPS.CE_999_PKG.unclear
i would like to check and if meet certain condition, i would like to raise error/exception, so that the Reconcile or UnReconcile can not proceed, how can I do that?
i try to do a plsql 'raise exception', in ebs screen, show
'FRM-40734: Internal Error: PL/SQl error occurred.'
anyway to show the error msg in a popup msg box and/or display with more meaningful error message?

Hi Brian,
This is because, one payment/receipt cannot be shared by more than one bank statement line. This is why once payment/receipt is reconciled against a bank statement line, you can view this transaction only from reconciled screen.
Regards,
Kiran

How to raise Error Message in foreground through Dynamic Action?

Hi,
I have a requirement where I have to raise an error message in foreground so as to stop processing whenever HR_INFOTYPE_OPERATION fails to update a record in a dynamic program. I tried using MESSAGE statement but it did not work, as the error message was not displayed properly on the Infotype screen that calls the dynamic action.
For ex.: If infotype PA0000 is calling PA0014 through dynamic action, then I want the error message to be displayed on the Actions Screen of PA0000.
Is there any specific way to raise error messages through dynamic action programs?
Quick answers will be appreciated.

HI Sanjana,
In the Substitution exits you can create the message in the configuration it self.
You dont't need raise message explicitly.
Thanks,

Raising Error messages

Hi all,
We are using SAP ABAP Web Dynpro Component: RPLM_QIMT_NOTIF_COMP to create notification(IW21). After entering data to create notification screen and press save, we want to do some validations and trough error message to screen and stop saving notifications until errors are fixed. I am able to raise error message but not able to stop further processing. Notification is geting saved even after trowing error message. could some one give us clue or Rather sample code to stop further processing. Notification is created via portal.
Rgds,
Harish
Edited by: Harish Aginati on Jul 19, 2009 2:25 PM

hi,
You can use Report Error message. ( control wizard ).
Use below mentioned code :
get message manager
DATA lo_api_controller     TYPE REF TO if_wd_controller.
DATA lo_message_manager    TYPE REF TO if_wd_message_manager.
lo_api_controller ?= wd_this->wd_get_api( ).
CALL METHOD lo_api_controller->get_message_manager
RECEIVING
    message_manager = lo_message_manager
report message
CALL METHOD lo_message_manager->report_error_message
EXPORTING
    message_text             = ' Error messge Text'
   params                   =
   msg_user_data            =
   is_permanent             = ABAP_FALSE
   scope_permanent_msg      = CO_MSG_SCOPE_CONTROLLER
   view                     =
   show_as_popup            =
   controller_permanent_msg =
   msg_index                =
   cancel_navigation        = ' X'
receiving
    message_id               =
Give Cancel navigation X.
I hope it works.

Raising Error message

Hi all,
We are using SAP ABAP Web Dynpro Component: RPLM_QIMT_NOTIF_COMP to create notification(IW21). After entering data to create notification screen and press save, we want to do some validations and trough error message to screen and stop saving notifications until errors are fixed. Could someone give us clue how we raise error messages. Rather sample code to raise error messages. Notification is created via portal.
Rgds,
Harish

Hello Harish,
When the user presses on the save button, an event would be triggered. You can catch this event and perform your validations. Once the validations are done, you can use the FPM message manager to report your error messages. (IF_FPM_MESSAGE_MANAGER). You can instantiate this API in your component and then use the methods from this API to report your messages on the UI.
Regards
Rohan

How to raise error message from PAI of oops ALV report

Hi All,
I have a requirement to raise error message form editable oops alv . After entering the data and then press SAVE button .
Please help.
Thanks in Advance

HI SK,
Write a Local class (Event Handeler) to handel the events. In Editable ALV once the user enter a value, CL_GUI_ALV_GRID will raise an event called DATA_CHANGED.
1. Define and Implement a local class to handle that event.
In the implementation of this class you need to get data from imported object to an internal table, then compare the same with the ALV output table.
* Local Class to handler the events raised from the ALV Grid
CLASS LCL_EVENT_HANDLER DEFINITION.
PUBLIC SECTION.
* Method to handel EDIT event, DATA_CHANGED of CL_GUI_ALV_GRID
METHODS : ON_DATA_CHANGE FOR EVENT DATA_CHANGED OF CL_GUI_ALV_GRID
                       IMPORTING ER_DATA_CHANGED.
ENDCLASS.
* Event handler class Implementation
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
METHOD ON_DATA_CHANGE.
    DATA : LT_MODIFY TYPE LVC_T_MODI,
               LS_MODIFY TYPE LVC_S_MODI.
* Copying changed data into intenal table from Object
    LT_MODIFY = ER_DATA_CHANGED->MT_MOD_CELLS.
* Modifying the ouptut table with the changed values
    IF LT_MODIFY[] IS NOT INITIAL.
          *Compare the ALV Output table with LT_MODIFY
    ENDIF.
ENDMETHOD.
ENDCLASS.
Then raise a message on required condition in the same method.
Note: To trigger the above method, you need to set event handler before displaying ALV (before calling method SET_TABLE_FOR_FIRST_DISPLAY)
* Creating object for the Local event handler class
CREATE OBJECT GR_HANDLER.
* Set handler (call method of Event_handler) to handler Edit event
SET HANDLER GR_HANDLER->ON_DATA_CHANGE FOR GR_GRID.
Regards,
Vijay

Unmountable boot volume error blue screen

I have a toshibia laptop that has crashed, I am eventually getting the unmountable_boot_volume error blue screen, the recovery disks that i ordered will not work, just disk 1 loads windows file then goes to a black screen with the cursor pointer, computer repair does the same thing, os is windows 7 satellite c655d-s5120 64 bit the bios does show the hard drive name and the boot log is showing the last driver loaded is windows/system 32/drivers/atipcie.sys, can I order a recovery for the windows 7 or is there any other ideas to fix this?not sure why this is happening

If you've already ordered a set of recovery discs, you probably don't need to order another one. While it's possible that the discs are bad (and maybe you should call customer support just to see what they say), it's also possible that you have a hardware failure of some sort.
- Peter

STOP ERROR - Blue Screen - on Lap Top - Fixed, tear1, support rocks!!!!!!

New Iphone, and new laptop, installed itunes Noprob,
Hooked Iphone to usb laptop found Iphone and installed and activated Noprob,All systems go, I am loving it.
I then ejected my Iphone and hooked up my Ipod to transfer purchesed music and shows transfered Noprob, so I eject my Ipod to hook up my Iphone to put my purchesed music on it.
THATS when it happened.
STOP ERROR- Blue screen,cpu restarted on its own.
I deleted itunes and I deleted camradrives, printer drivers.
I tried allmost everything and still got the same blue screen.
To make a long story shorter I called apple talked to the (now this is important) Iphone/Itunes department they are seperate but have a div. that works as one but you have to ask for the department that takes care of both or you will talk to both or 3 or 4 other dept.
Tear 1 Support had me do a soft reset on my phone it did not work so I backed up my phone # and they showed me how to do a compleate reset and it worked.
I have been Error and blue screen free for 2 days and I feel very posative about the future with my relationship between my cpu and my phone
Thank you for your time.
I hope I help some one I found no relief here with my problem but its a great resource for information
GOD BLESS TEAR 1 SUPPORT YOUR TEAM ROCK'S
Pro-Iceman
Anacotes,Wa

You don't need to upgrade your software. But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3. It's easy to use in DW CS4, 5, 6 or CC. More importantly, it's bullet proof and works in all devices.
Pop-Menu Magic3 by PVII (commercial DW extension)
http://www.projectseven.com/products/menusystems/pmm3/index.htm
If you don't have a budget to work with, you can roll your own menus with jQuery plugins. A bit more effort on your part, but they perform better than Spry.
jQuery Superfish
http://users.tpg.com.au/j_birch/plugins/superfish/
jQuery MegaMenu2
DEMO:
http://www.geektantra.com/projects/jquery-megamenu-2/
DOWNLOAD:
http://code.google.com/p/jquery-megamenu/
Nancy O.

Xorg/Intel, issues. "Fatal Error: No Screens Found" [SOLVED]

I'm using an intel chipset with integrated graphics on an older computer, (old enough that I have to use kms) which worked previously, but didn't after the update. I've already enabled kms, so I ruled that out, if any of you can help, here are my logs:
Results of $- Xinit
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.1.901 (1.7.2 RC 1)
Release Date: 2009-11-6
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH i686
Current Operating System: Linux Sek-Gamma 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/82572740-394d-448c-8da4-b6d4ed904793 ro acpi=off
Build Date: 08 November 2009 04:12:47PM
Current version of pixman: 0.16.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 16 02:09:03 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e5d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 3
(--) PCI:*(0:0:2:0) 8086:2562:109f:3189 Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ 0xf0000000/134217728, 0xe8000000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.4.901, module version = 2.10.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(EE) intel(0): No kernel modesetting driver detected.
(II) UnloadModule: "intel"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
With the vesa driver specified, it still gives me an error based on the extension "Record" in xorg.
Last edited by silversnakeeyes (2010-08-25 13:58:14)

Crap, it didn't work. I tried with the i915 thing on through grub, and is still failed.
The bug in xorg also said that there was a bug with the module 'record' so I removed it completely and tried again, for some reason it still didn't work. With vesa as the driver, I get a black screen, which is the closest to a GUI I've seen in weeks.
Error log - Vesa with 'Record' removed:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.1.901 (1.7.2 RC 1)
Release Date: 2009-11-6
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH i686
Current Operating System: Linux Sek-Gamma 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/82572740-394d-448c-8da4-b6d4ed904793 ro acpi=off i915.modeset=1
Build Date: 08 November 2009 04:12:47PM
Current version of pixman: 0.16.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 16 23:20:03 2010
(++) Using config file: "/home/ssen/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e5d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 2
(--) PCI:*(0:0:2:0) 8086:2562:109f:3189 Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ 0xf0000000/134217728, 0xe8000000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 8000 kB
(II) VESA(0): VESA VBE OEM: Intel(r)845G/845GL/845GE/845GV Graphics Chip Accelerated VGA BIOS
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
(II) VESA(0): VESA VBE OEM Product: Intel(r)845G/845GL/845GE/845GV Graphics Controller
(II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(==) VESA(0): Depth 24, (--) framebuffer bpp 32
(==) VESA(0): RGB weight 888
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): VESA VBE DDC Level none
(II) VESA(0): VESA VBE DDC transfer in appr. 0 sec.
(II) VESA(0): VESA VBE DDC read failed
(II) VESA(0): VESA VBE PanelID invalid
(II) VESA(0): Searching for matching VESA mode(s):
Mode: 13c (1920x1440)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 1920
XResolution: 1920
YResolution: 1440
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 1
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1920
BnkNumberOfImagePages: 1
LinNumberOfImagePages: 1
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 14d (1920x1440)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 3840
XResolution: 1920
YResolution: 1440
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 0
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 3840
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 15c (1920x1440)
ModeAttributes: 0x9a
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 7680
XResolution: 1920
YResolution: 1440
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 0
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 7680
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
Mode: 13a (1600x1200)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 1600
XResolution: 1600
YResolution: 1200
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 3
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1600
BnkNumberOfImagePages: 3
LinNumberOfImagePages: 3
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 14b (1600x1200)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 3200
XResolution: 1600
YResolution: 1200
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 1
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 3200
BnkNumberOfImagePages: 1
LinNumberOfImagePages: 1
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
*Mode: 15a (1600x1200)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 6400
XResolution: 1600
YResolution: 1200
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 0
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 6400
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
Mode: 107 (1280x1024)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 1280
XResolution: 1280
YResolution: 1024
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 5
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1280
BnkNumberOfImagePages: 5
LinNumberOfImagePages: 5
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 11a (1280x1024)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 2560
XResolution: 1280
YResolution: 1024
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 2
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 2560
BnkNumberOfImagePages: 2
LinNumberOfImagePages: 2
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
*Mode: 11b (1280x1024)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 5120
XResolution: 1280
YResolution: 1024
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 0
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 5120
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
Mode: 105 (1024x768)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 1024
XResolution: 1024
YResolution: 768
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 9
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1024
BnkNumberOfImagePages: 9
LinNumberOfImagePages: 9
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 117 (1024x768)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 2048
XResolution: 1024
YResolution: 768
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 4
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 2048
BnkNumberOfImagePages: 4
LinNumberOfImagePages: 4
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
*Mode: 118 (1024x768)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 4096
XResolution: 1024
YResolution: 768
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 1
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 4096
BnkNumberOfImagePages: 1
LinNumberOfImagePages: 1
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
*Mode: 112 (640x480)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 2560
XResolution: 640
YResolution: 480
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 5
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 2560
BnkNumberOfImagePages: 5
LinNumberOfImagePages: 5
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
Mode: 114 (800x600)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 1600
XResolution: 800
YResolution: 600
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 7
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1600
BnkNumberOfImagePages: 7
LinNumberOfImagePages: 7
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
*Mode: 115 (800x600)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 3200
XResolution: 800
YResolution: 600
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 32
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 3
RedMaskSize: 8
RedFieldPosition: 16
GreenMaskSize: 8
GreenFieldPosition: 8
BlueMaskSize: 8
BlueFieldPosition: 0
RsvdMaskSize: 8
RsvdFieldPosition: 24
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 3200
BnkNumberOfImagePages: 3
LinNumberOfImagePages: 3
LinRedMaskSize: 8
LinRedFieldPosition: 16
LinGreenMaskSize: 8
LinGreenFieldPosition: 8
LinBlueMaskSize: 8
LinBlueFieldPosition: 0
LinRsvdMaskSize: 8
LinRsvdFieldPosition: 24
MaxPixelClock: 230000000
Mode: 109 (132x25)
ModeAttributes: 0xf
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 594
XResolution: 132
YResolution: 25
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 4
NumberOfBanks: 1
MemoryModel: 0
BankSize: 0
NumberOfImages: 0
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0x0
LinBytesPerScanLine: 0
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 0
Mode: 10a (132x43)
ModeAttributes: 0xf
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 594
XResolution: 132
YResolution: 43
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 4
NumberOfBanks: 1
MemoryModel: 0
BankSize: 0
NumberOfImages: 0
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0x0
LinBytesPerScanLine: 0
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 0
Mode: 10b (132x50)
ModeAttributes: 0xf
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 594
XResolution: 132
YResolution: 50
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 4
NumberOfBanks: 1
MemoryModel: 0
BankSize: 0
NumberOfImages: 0
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0x0
LinBytesPerScanLine: 0
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 0
Mode: 10c (132x60)
ModeAttributes: 0xf
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 594
XResolution: 132
YResolution: 60
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 4
NumberOfBanks: 1
MemoryModel: 0
BankSize: 0
NumberOfImages: 0
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0x0
LinBytesPerScanLine: 0
BnkNumberOfImagePages: 0
LinNumberOfImagePages: 0
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 0
Mode: 101 (640x480)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 640
XResolution: 640
YResolution: 480
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 24
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 640
BnkNumberOfImagePages: 24
LinNumberOfImagePages: 24
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 103 (800x600)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 800
XResolution: 800
YResolution: 600
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 16
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 800
BnkNumberOfImagePages: 16
LinNumberOfImagePages: 16
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
Mode: 111 (640x480)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005d56
BytesPerScanline: 1280
XResolution: 640
YResolution: 480
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 16
NumberOfBanks: 1
MemoryModel: 6
BankSize: 0
NumberOfImages: 12
RedMaskSize: 5
RedFieldPosition: 11
GreenMaskSize: 6
GreenFieldPosition: 5
BlueMaskSize: 5
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xf0000000
LinBytesPerScanLine: 1280
BnkNumberOfImagePages: 12
LinNumberOfImagePages: 12
LinRedMaskSize: 5
LinRedFieldPosition: 11
LinGreenMaskSize: 6
LinGreenFieldPosition: 5
LinBlueMaskSize: 5
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000
(II) VESA(0): Total Memory: 125 64KB banks (8000kB)
(II) VESA(0): Monitor0: Using default hsync range of 31.50-37.90 kHz
(II) VESA(0): Monitor0: Using default vrefresh range of 50.00-70.00 Hz
(WW) VESA(0): Unable to estimate virtual size
(II) VESA(0): Not using built-in mode "1600x1200" (no mode of this name)
(II) VESA(0): Not using built-in mode "1280x1024" (no mode of this name)
(II) VESA(0): Not using built-in mode "1024x768" (no mode of this name)
(II) VESA(0): Not using built-in mode "800x600" (no mode of this name)
(II) VESA(0): Not using built-in mode "640x480" (no mode of this name)
(WW) VESA(0): No valid modes left. Trying less strict filter...
(II) VESA(0): Monitor0: Using hsync range of 31.50-37.90 kHz
(II) VESA(0): Monitor0: Using vrefresh range of 50.00-70.00 Hz
(WW) VESA(0): Unable to estimate virtual size
(II) VESA(0): Not using built-in mode "1600x1200" (hsync out of range)
(II) VESA(0): Not using built-in mode "1280x1024" (hsync out of range)
(II) VESA(0): Not using built-in mode "1024x768" (hsync out of range)
(--) VESA(0): Virtual size is 800x600 (pitch 800)
(**) VESA(0): *Built-in mode "800x600"
(**) VESA(0): *Built-in mode "640x480"
(==) VESA(0): DPI set to (96, 96)
(II) VESA(0): Attempting to use 60Hz refresh for mode "800x600" (115)
(II) VESA(0): Attempting to use 60Hz refresh for mode "640x480" (112)
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 8000 kB
(II) VESA(0): VESA VBE OEM: Intel(r)845G/845GL/845GE/845GV Graphics Chip Accelerated VGA BIOS
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
(II) VESA(0): VESA VBE OEM Product: Intel(r)845G/845GL/845GE/845GV Graphics Controller
(II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) VESA(0): virtual address = 0xb6883000,
physical address = 0xf0000000, size = 8192000
(II) VESA(0): Setting up VESA Mode 0x115 (800x600)
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(==) VESA(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 2.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Logitech USB Gaming Mouse
(**) Logitech USB Gaming Mouse: always reports core events
(**) Logitech USB Gaming Mouse: Device: "/dev/input/event3"
(II) Logitech USB Gaming Mouse: Found 20 mouse buttons
(II) Logitech USB Gaming Mouse: Found scroll wheel(s)
(II) Logitech USB Gaming Mouse: Found relative axes
(II) Logitech USB Gaming Mouse: Found x and y relative axes
(II) Logitech USB Gaming Mouse: Configuring as mouse
(**) Logitech USB Gaming Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB Gaming Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Gaming Mouse" (type: MOUSE)
(**) Logitech USB Gaming Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB Gaming Mouse: (accel) acceleration profile 0
(II) Logitech USB Gaming Mouse: initialized for relative axes.
(II) Logitech USB Gaming Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"

Error in 'Screen output w/o coonection to user' function BAPI_APOATP_CHECK

Hi Experts,
I am trying to create a new condition record for pick/pack time (Transportation and Shipment Scheduling) in APO, by creating a entirely new condition table & keeping highest access sequence no.
But after creating this & moving it to staging system, we are getting error of "Screen output w/o coonection to user" in creating Sales order in R/3 & check for ATP.
RFC connections are working fine.
Could you please help, I consulted with BASIS about system vs dialog users, but that's not issue according to them, as the client set-up is quite old, it won't be necessary.
Could you please help me in this?
Thanks a lot !
Anurag Patki.

Hi Tiago,
Thanks a lot for the help.
BASIS team changed the user to dialog user.
Could you please suggest as what might went wrong for system to behave like this? And has this any co-relation with the changes I made & transported to staging system. As the changes made were cross-client. Was this the issue?
I appreciate your support on this.
Anurag Patki.

How to raise error in Essbase UDF.

Hi all.
I have an udf:
pulbic statuc void publish(String arg) throws RTimeException {
throws new RTimeException ("error");
and RTimeException defiend as:
class RTimeException extends Exception
RTimeException()
RTimeException(String msg)
super(msg);
When i call the UDF from a business rule, it completes without any error.
How to raise error to force the business rule to fail?
Oleg.

UP!

Trying to sync iPhone to pc but keeps getting internal device error on screen, also showing only 4gb size instead of 32gb. Uninstalled iTunes from pc and reloaded. Powered back up and all songs and info still in place. Anyone had this problem before?

Trying to sync iPhone to pc but keeps getting internal device error on screen, also showing only 4gb size instead of 32gb. Uninstalled iTunes from pc and reloaded. Powered back up and all songs and info still in place. Anyone had this problem before?

Doublechecking something Emcee. I see you've got Windows 7 x64, so I'm assuming you've got at least 4 GB of RAM. Do you also have an NVIDIA USB EHCI chipset on that PC? If so, see the following Microsoft document:
[You encounter problems when you move data over USB from a Windows 7 or Windows Server 2008 R2-based computer that has an NVIDIA USB EHCI chipset and at least 4GB of RAM|http://support.microsoft.com/kb/976972]

Raising Error in Process BTE 1120? is it safe?

Dear all Experts,
Iam using Process BTE - 00001120, to validate many things. It gets triggered in almost every FI document just beofre saving the document. My Question is, is it safe to raise Error Message in this BTE as it gets triggered just before saving? If you can guide me to any FAQ's on BTE, it will be helpful.
Note : Please answer the question if you have worked on the said BTE and if you have knowledge on it.
Thanks & Regards,
Faheem.

Hi Nabeehatmadan,
Thanks for the quick reply.Firstly I have not worked extensively on FI VALIDATIONS & SUBSTITUTIONS.As far as my knowledge and understanding , FI Validations & Substitutions are provided by SAP & we dont need to register Access Key for the same. But please check the Page 2 of the note 842318, which states :
If you create a substitution, for example "Financial accounting - document
line item", only certain fields are authorized for the substitution. This
is because it may lead to problems with the documents or inconsistencies
between different applications.
It is possible to release more fields for substitution. However, this can
be critical, as serious problems can occur as a result.
This is why you should regard the following change as a modification (Note
170183).
And as I said that I have to raise error messages based on my checks and I have to use User Exits for the same to get my checks done as my checks includes conversions of WBS/Project compared with assignment etc etc , which cannot be done directly. Now check Page no 4 of the same note which states we cannot issue Messages :
3. What must I take into account when implementing the user exit?
No dialog boxes, warning messages, information or error messages must be
issued in an exit, and a "COMMIT WORK" must not be rejected. This would,
for example, interrupt the batch processing or cause problems with the
documents to be posted. If you find a serious error in the field contents
in the exit, send a termination message (A or X), which will ensure that
the transaction is terminated.
Please guide me if iam wrong ?
Please let me know if we can issue error messages in BTE 1120?
Thanks & Regards,
Faheem.

Need a BADI for raising error messages for equi update (IE02)

Hi,
we are trying to raise few error messages while creating equipments through BADI's (Processing through IE02 and BAPI's).
No BADI's are supporting for raising error messages.
SAP doesnt support processing of userexits through BAPI's (refer note 564467).
we actually need to implement these checks and should available for all the below processes:
Through IE02
while doing through BAPI's
While Executing MASS CHANGE functionality (IE05)
Please suggest any other solution to achieve all the three at one go instead of creating some enhancements for every thing.
thanks.

Hi,
Try and search for a BADI....for transaction I102...take the package name and go to SE18 and see if BADI's are available...
Alternatively search for key CL_EXITHANDLER or get BADI in the main program of IE02..
if you are using SAP ECC6.0 then implicit or explicit enhancements will be available... Utilize them to meet your requirement...
Thanks

While os db migration standrad table raising error

Hi gurus,
My basis team doing os db migration after export when they are trying to import data they are terminating due to problem that at the standrad table SMEN_DATES it is raising error VIOLATION OF PRIMARY KEY. So we checked for the table contents
in that table TYP and ID as primary key fileds but in contents there are entries with same combination of TYP and ID. Now problem is that how to rectify that primary key violation with out modifying data.
Thanks in advance,
Santhi.

It's not feasible to "rectify". The data has to be changed to conform to the database key.

Raising Error in Screen

Similar Messages

Maybe you are looking for