Random APs/RAPs losing its configuration automatically?

Problem:
We are started seeing the issue where some of the RAPs are losing its configuration like ipsec parameters, master ip automatically.
This happens only for random APs.
Diagnostics:
Found that these were the APs which were showing mismatch status on the Airwave.
Also Airwave was changed to manage mode for sometime to collect some information.
Once the Airwave was changed to monitor mode this occurrence has stopped.
Solution
If the Aps are in managed mode and if the Airwave sees a mismatch status/configuration it may try to match the configuration it actually holds.
If the reference configuration doesn’t have master ip, rap configuration or the values are empty, this situation may happen.
So kindly be careful in changing the mode to manage mode.

Hi,
Actually when you use you AP with the WLC it don't have configuration rights on it,
It just perform the radio communication no more than this, so when you bring AP in your network and use flex-connect then all the configuration reflects/provisions from WLC.

Similar Messages

TextBox losing its text when focus changed?

Hi all,
Im developing a plugin in Illustrator CS3 using VisualStudio 2005.
I design my dialog using ADM in VS.
The textbox losing its text when focus is changed.
In my dialog i have a textbox,checkbox and a ok and cancel button.
In case, if i enter the text and press tab or the checkbox (before moving the focus to ok or cancel button) the text remains uncleared.
But if i enter the text and move the mouse to ok or cancel button the text box value gets cleared.
Please someone guide me to solve this problem.
Thanks in advance,
Poovili

Yeah its working when removing the setdrawproc..
But we need this setdrawproc..Because we save the project settings and next time we load the project the values'll automatically come up using this dialogdrawproc in setdrawproc..the following is our dialogdrawproc code
static void ASAPI DialogDrawProc( ADMDialogRef dialog,ADMDrawerRef drawer)
    ADMItemRef ItemRef;
    if(dialog==g->qcCheckDialog )
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtOverprint);
        sADMItem->SetText(ItemRef,g->BlackValues);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtTintValues);
        sADMItem->SetText(ItemRef,g->TintValues );
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtRuleThickness);
        sADMItem->SetText(ItemRef,g->RuleThickNess );
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtDashGap1);
        sADMItem->SetText(ItemRef,g->DashGapValues );
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtPatterns);
        sADMItem->SetText(ItemRef,g->PatternValues );
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtLeadTextSize);
        sADMItem->SetText(ItemRef,g->LeadTextSize );
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtSuperscript);
        sADMItem->SetText(ItemRef,g->SupValue );
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtSubscript);
        sADMItem->SetText(ItemRef,g->SubValue );
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtBitmapResFrom);
        sADMItem->SetText(ItemRef,g->BitmapResFrom);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtGrayScaleResFrom);
        sADMItem->SetText(ItemRef,g->GrayscaleResFrom);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtCMYKResFrom);
        sADMItem->SetText(ItemRef,g->CMYKResFrom);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtBitmapResTo);
        sADMItem->SetText(ItemRef,g->BitmapResTo);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtGrayScaleResTo);
        sADMItem->SetText(ItemRef,g->GrayscaleResTo);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtCMYKResTo);
        sADMItem->SetText(ItemRef,g->CMYKResTo);
        //-------------TYPE AREA---------------------------------
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtAreaWD);
        sADMItem->SetText(ItemRef,g->TAreaWD);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtTAHeight2);
        sADMItem->SetText(ItemRef,g->TAAreaHt);
                        //column size
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtColumn1Height);
        sADMItem->SetText(ItemRef,g->Column1Height);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtColumn1Width);
        sADMItem->SetText(ItemRef,g->Column1Width);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtColumn2Height);
        sADMItem->SetText(ItemRef,g->Column2Height);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtColumn2Width);
        sADMItem->SetText(ItemRef,g->Column2Width);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtColumn3Height);
        sADMItem->SetText(ItemRef,g->Column3Height);
        ItemRef=sADMDialog->GetItem(g->qcCheckDialog ,txtColumn3Width);
        sADMItem->SetText(ItemRef,g->Column3Width);
        //sADMDialog->Draw(drawer);
        //admDialog->Draw(drawer);
        //-------------SAVE SETTINGS--------------------------------
    if(dialog==g->LoginSaveSettingsDialog)
        ItemRef=sADMDialog->GetItem(g->LoginSaveSettingsDialog ,txtLSSUser1);
        sADMItem->SetText(ItemRef,g->TxtLSSUser1);
        ItemRef=sADMDialog->GetItem(g->LoginSaveSettingsDialog ,txtLSSPassword);
        sADMItem->SetText(ItemRef,g->TxtLSSPassword);
    //-----------------ADD NEW USER-----------------------------------
    if(dialog==g->AddNewUserDialog)
        ItemRef=sADMDialog->GetItem(g->AddNewUserDialog ,txtLogin1);
        sADMItem->SetText(ItemRef,g->TxtLogin1);
        ItemRef=sADMDialog->GetItem(g->AddNewUserDialog ,txtPassword);
        sADMItem->SetText(ItemRef,g->TxtPassword);
    if(dialog==g->AddingUsertoDBDialog)
        ItemRef=sADMDialog->GetItem(g->AddingUsertoDBDialog ,txtNeuUser);
        sADMItem->SetText(ItemRef,g->TxtNeuUser);
        ItemRef=sADMDialog->GetItem(g->AddingUsertoDBDialog ,txtCreateNewPassword);
        sADMItem->SetText(ItemRef,g->TxtCreatePassword);
    //-------------------------Change Password-----------------------
    if(dialog==g->ChangePasswordDialog)
        ItemRef=sADMDialog->GetItem(g->ChangePasswordDialog ,txtCPLogin);
        sADMItem->SetText(ItemRef,g->TxtCPLogin1);
        ItemRef=sADMDialog->GetItem(g->ChangePasswordDialog ,txtCPOldPass);
        sADMItem->SetText(ItemRef,g->TxtCPOldPass);
        ItemRef=sADMDialog->GetItem(g->ChangePasswordDialog ,txtCPNewPass);
        sADMItem->SetText(ItemRef,g->TxtCPNewPass);
        ItemRef=sADMDialog->GetItem(g->ChangePasswordDialog ,txtCPConfirmPass);
        sADMItem->SetText(ItemRef,g->TxtCPConfirmPass);
    if(dialog==g->SelectProjDialog)
         if (CyanToMagBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        /*else if(RasterColorsBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        else if(RasterColorsBool==true)
            dialog = sADMItem->GetDialog(ItemRef);
            if (ItemRef==sADMDialog->GetItem(dialog, txtAssessmentPath1))
                sADMItem->GetText(ItemRef,g->ConversionFolderPath ,1024);
                sADMItem->SetText(ItemRef,g->ConversionFolderPath );
                //MessageBox(NULL,g->BlackValues,"Txt",0);
       else if(SaveAdvancedAssessBool == true)
           ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->AssessmentFolderPath);
        else if(ConvertSwatchBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath);
        else if(DrawBBBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtBBSpacing);
            sADMItem->SetText(ItemRef,g->BBSpacing );
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtBBStrokeWidth);
            sADMItem->SetText(ItemRef,g->BBStrokeWidth );
        else if(ConvertGradientBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        else if (PantoneToCyanBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        else if (QceraBatchConversionBool1==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        else if (PantoneToMagentaBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        else if(SaturationBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        else if(ColorOverprintBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        //else if(ColorsBatchBool==true)
        if(sADMItem->GetBooleanValue( sADMDialog->GetItem( g->SelectProjDialog, CHK_CheckColors1 ))==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        else if (ConvertFontsBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
            else if(FontCorrectionBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        else if(ScalingBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->ConversionFolderPath );
        else if(SaveAssessBool==true)
            ItemRef=sADMDialog->GetItem(g->SelectProjDialog ,txtAssessmentPath1);
            sADMItem->SetText(ItemRef,g->AssessmentFolderPath);
            //MessageBox(NULL,g->AssessmentFolderPath,"Assess",0);
//MessageBox(NULL,g->ConversionFolderPath,"Assess",0);
    if(dialog==g->CleanDialog)
        if(CleanArtBatchConversionBool==true)
        ItemRef=sADMDialog->GetItem(g->CleanDialog ,txtLeadingValue);
        sADMItem->SetText(ItemRef,g->leadingValue );
        ItemRef=sADMDialog->GetItem(g->CleanDialog ,txtBlackValues);
        sADMItem->SetText(ItemRef,g->ApplyBlackValues );
        ItemRef=sADMDialog->GetItem(g->CleanDialog ,txtCleanArt_SpecifyFolder1);
        sADMItem->SetText(ItemRef,g->CleanArtFolderPath );
Let me know if i'm not clear. Thanks in advance..

How to configure Automatic Account Clearing for A/R

Hi,
Kindly advice me how to configure Automatic Account Clearing for A/R
The client requirement is
In A/R the customer accounts are not automatically clearing when a payment is posted for that account. We are still seeing all open items and all paid or cleared items when we go to FBL5N and select open items for viewing. Please make account clearing automatic for customer payments.
Thanks in advance
Sunitha

Hi,
Use T code OB74.
Maintain for your Chart Of Account, acct type "D", From and to customer accounts and then add the critera you want. Pls note you cannot define more than 5 criteria.
Then schedule the clearing program job F.13 in the background.
Cheers.

HT201412 my ipod touch is randomly playing songs on its own. i cannot choose the song I want to hear it continuosly skips several songs and then suddenly plays it. also the album cover does not match the song playing

My ipod touch is randomly playing songs on its own. It skips several songs then suddenly stops and plays that song. If i try to select a song it will not play that song it keeps skipping over severla songs at a time then plays again. The album covers do not match that song that is playing and now its not connected to wifi. I need help

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Partner Profile and its configuration.

Hi all,
I am creating an SD IDoc using EDI and send it between two servers.
I need to know what is a partner profile and why should we create it.
what are the steps to be followed in maintaining a partner profile and its configuration.
Any pointers will be highly apppreciated.
Thanks in advance,
Regards,
Jose
Edited by: Jose Anthony Reddy on Dec 17, 2007 11:23 PM

Hi Jose,
Below is a material you can go through .
Creating an Outbound Partner Profile
Here you must enter the data manually. Alternatively, you can also transfer the default values from Customizing.
If you are not yet on the change screen of your desired partner, choose SAP Menu ® Tools ® IDoc Interface/ALE ® Administration ® Runtime Settings ® Partner Agreement (WE20).
1. Position the mouse on your partner in the required partner type node. Choose in the Outbound Parameter table.
Key Fields
2. You have already determined partner number and partner type in general partner processing. The partner function from the master data defines the addressee, that is, it is used for further classification purposes. If you have selected outbound processing under Message Control (MC), the function must be identical to the corresponding Message Control field. Otherwise, it is optional.
Partner A (customer 1110) wants to order a material from partner B (vendor 1014). Partner B is of the partner type LI (vendor) and must choose the Message Control value VD (vendor) as the partner function because orders must always be processed using Message Control.
3. Specify the business process with the logical message, within which the IDoc type is used. The logical message is described by three parameters: The message type is based on EDIFACT message types: For example, a purchase order is of type ORDERS. You can further divide the message type with the optional fields message code and message function.
4. Configure the test indicator if you want to send the message as a test.
Message, partner and test indicator are the seven key fields of the outbound partner profiles (the client comes in addition to these). Also see the graphic at the end of this section.
Other Fields
5. In the Outbound options tab page, you can determine whether IDocs are forwarded immediately to the receiving system. You should ensure that your entries are compatible with the Message Control priorities, if you have chosen outbound processing under Message Control. A list of recommended combinations is provided in the section Outbound Processing Under MC: Procedure.
6. You have already defined the Recipient port in Port definition.
7. If a port of type TRFC is used, the Queue Processing field is visible. You can use the indicator to specify whether IDocs are to be sent with qRFC. This sending technique is only possible for recipient SAP systems as of SAP Web AS 6.20.
You should only set this flag if it is really necessary that the IDocs sent are received in the receiving system in the same sequence as they were sent by the sender system. Queuing can cause posting delays in the receiving system, because an IDoc in the queue cannot be posted. In this case, the following IDocs in the queue cannot be posted until the error is resolved.
8. If you have set the Queue Processing indicator, the Rule Name field, which you must then also maintain, appears as well. The rule name defines the rules for queue names. You can specify these rules in the transaction qRFC IDoc Queue Name Rules (WE85).
9. Specify the IDoc type as the Basic type with or without extension. If you want to use a view of your IDoc type (for example, to improve the performance), specify this here.
The figure below shows the m-to-n relationship between logical messages (business meaning) and IDoc types (technical format). Message 1, for example, is always assigned to one IDoc type, while message 3 is assigned to two IDoc types. IDoc type 2, in turn, is also assigned to 2 logical messages.
10. The segment release specifies the release from which the segment definitions (not the IDoc type definition) originates. We recommend that you leave this field blank so that the most recent segment definition is used.
11. You can propose an EDI standard, version and EDI message type for the receiving system in the tab page EDI Standard. Most subsystems, however, should be able to determine these EDI settings themselves (from the logical message).
12. You can define permitted agents for cases in which exceptions occur. This entry overrides the entry in the general partner profiles. Depending on the message, therefore, the exception can be handled by different agents of the same partner.
13. You can specify whether syntax errors are to be ignored or are to lead to a processing error (Cancel Processing flag under syntax check in the tab page outbound options). For more information about exception handling and permitted agents, refer to the following section: Exception Handling
14. If your hardware supports it, create partner and message specific telephony data for outbound IDocs. For more information, see General Partner Profile.
Graphic: Outbound partner profile fields (general)
Key fields are shown in gray. The values for partner, message and test indicator (and client) therefore provide a unique ID for the IDoc type in outbound processing.
Regards,
Praveen

TS3623 IN THE MIDDLE OF A MOVIE ... APPLE TV STOPS WORKING. I HAVE YET TO WATCH A MOVIE FROM BEGINNING TO END WITHOUT APPLE TV LOSING ITS CONNECTION TO MY NETWORK

I PURCHASED MY APPLE TV ON FEBRUARY 7, 2012. I HAVE YET BEEN ABLE TO WATCH AN ITUNES PURCHASED MOVIE FROM BEGINNING TO END WITHOUT IT LOSING ITS CONNECTION TO MY NETWORK.

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

When i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.

when i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.when i click start it says the apple mobile device services stopped in the middle then stopped.it said some services stop in the middle if not used by other services.and i just updated itunes before all a this and ever since ive had errors.

Have you looked at this article:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Configuration automatic interest calculation on Accounts Receivable (AR)

HI Guru's
Any one can send me documents for :..
Configuration automatic interest calculation on Accounts Receivable (AR) open invoices for AR module based on aging of the customer i.e. different ageing different percentage.
Configuraton of automatic journal entry for interest calculated.
regards
JK

Tax gets calculated based on the rules setup. At lease default values of attributes like applicability, registration, POS etc are provided once the tax setup is done.
Please check the rules that are setup in Tax Managers to ensure which tax is getting calculated.
If you do not want tax to be calculated unless a TCC is supplied by user, you can setup a default tax with rate as zero which will be deafulted evrytime without TCC.
For rest of the cases where a TCC will be entered, you can setup up Determining Factor Sets, Condition Sets and then create rules using them for appropriate tax calculations.
Regards

Satelite C660 keeps losing its wireless connection

Hi
We have bought the above laptop for our son for christmas and it keeps losing its wireless connection, we also have a Satelite L450 which is running fine (not losing internet connection) we have been onto our broadband supplier they have told us that as the wireless connection on our other laptop is fine, it is something to do with the C660, one of the drivers needs an update, unfortuneately I have forgotten the driver name but it is something to do with the modem, Our son is desperate to use his laptop.
Can anyone help?

Had the same problem but with a different Satellite model - the signal was fine on another laptop in the room - the problem was the power management option / power plan - the link below says it all but in short if it is on balanced the default option the default means that it tells the router to go into a power save mode that it might not support.
http://support.microsoft.com/kb/928152
Have a read, hope it helps as it worked for me and is a very simple solution!
Message was edited by: AndreaEoF
Sorry just realised it was covered in post above, I just expanded on it a little.

My iPad 2 keeps losing its wi-fi signal

My iPad 2 keeps on losing its wi-fi signal

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Why does my ipod keep losing its network connection?

My ipod keeps losing its network connection every few minutes. Ive tried resetting the network settings, resetting the router and neither worked. Apart from my SpeedTouch router being knackered any other suggestions please?

Any chance there is interference in the area?
Do other devices and computers work? and are they wired or not?

My iphone 6 turned off while i was using face time and it returns with the screen saying Hello mean its reset automatically how is this possible ? Now it requires an id and password to activate which i do not remember need help ?

My iphone 6 turned off while i was using face time and it returns with the screen saying Hello mean its reset automatically how is this possible ? Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me.

shahzadfromlahore wrote:
Now it requires an id and password to activate which i do not remember need help ? but i do remember the id and password which i was using on itunes and Apple store. please i almoost buy it in 890$ so it will be a big lost please help me
Who set up the phone? Who's Apple ID was used to activate it?

HP widget loses its configuration and I can't set it bagk for my c7280

HP widget loses its configuration and I can't set it bagk for my c7280

if it keeps asking for the password again just write "0000", add the controller to your favorites, close bluetooth before asked for a password again, and the open bluetooth again

P2/MXF Footage in Premiere Pro CS6 constantly losing its linkage.

P2/MXF Footage in CS6 constantly losing its linkage. I'll relink the clips as the 'locate footage' box pops up, then a couple of minutes later, all the clips in the bin are showing the question mark and asking me to locate the clips again. It does this over and over. This happens on both my desktop machine and on my laptop.
Not having this problem with any of the file types at this point.

Just saw an official reply on another similar question asked at the same time as mine and that Adobe is aware of it and it's being worked on.
Thanks.

Group Policy Configure Automatic Updates to DISABLED

Single Primary Site running SCCM 2012 R2. SUP configured using port 8530/8531.
Group Policy Configure Automatic Updates to DISABLED. is in place.
Do we need to disable the group policy for SCCM to deploy updates?
if it stays then how do we distribute an updated WUA using software distribution in ConfigMgr?
http://blog.configmgrftw.com/software-updates-management-and-group-policy-for-configmgr-cont/

It used to be possible by using the links provided in the cab file mentioned in this article:
http://msdn.microsoft.com/en-us/library/windows/desktop/aa387285(v=vs.85).aspx
I have to admit that I did not do that recently..
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Random APs/RAPs losing its configuration automatically?

Similar Messages

Maybe you are looking for