Random bluetooth connection notifications when mouse is out of reach

My MB Pro randomly shows 'connected' and 'connection lost' notifications (as if the mighty mouse I use at work is getting (un)connected) when my mighty mouse is out of reach. The MB does this whenever it wakes up and shows both notification messages alternately for about 7 or 8 times. Also, when I look at the bluetooth settings in System Preferences, sometimes it says that the mighty mouse is connected, while it is not even in the room.

Maybe best to start fresh and factory reset your band and unpair from your phone and restart the whole pairing
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Similar Messages

Bluetooth connection notification sound

Does anyone know how to turn off the notification sound which plays when the Razr Maxx bluetooth connects with a car system? It is extremely annoying to have this play every time you get in the car and start it especially if you are running errands and make several stops.

Most notifications that come from an app (texts, emails, etc.) can be shut off individually, through that app. The bluetooth connection notification, however, AFAIK cannot. The only place it would make sense to be would be, from your homescreen, is menu>settings>wireless & networks>bluetooth settings. There is also an advanced bluetooth settings on this screen, but my phone (HTC Rezound) does not have an option to turn off that sound in either of these.

How to change the mouse cursor icon type when mouse moves out of client area ( propertysheet) WTL?

I got stuck with an issue in property sheet .I want to load different cursor when the mouse position is within the client area and load another when moves out of the client area.
In the porpetysheet I added four page. In the first page when I click next I am loading cursor of IDC_WAIT type and loading IDC_ARROW when the mouse moves out of the client area.
In the page class I triggered the event for WM_MOUSEMOVE as follow:
MESSAGE_HANDLER(WM_MOUSEMOVE, OnMouseMove)
LRESULT OnMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
if(TRUE == m_bIsNextBtnClicked)
::SetCursor(LoadCursor(NULL, IDC_WAIT));
else
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return TRUE;
This event is getting triggered and absolutely had no issue with this. Similarly I tried adding `MESSAGE_HANDLER(WM_MOUSELEAVE, OnMouseLeave)` this event making an assumption that this will get triggered if the mouse moves out of the client area, but
this event did not get triggered at all.If this is not the mouse event to be triggered for mouseleave which event should I trigger?
LRESULT OnMouseLeave(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return TRUE;
Now when I click Next button , **I was actually calling a function which is taking sometime to return** . Before to this function I am loading IDC_WAIT cursor i.e.,
`::SetCursor(LoadCursor(NULL, IDC_WAIT));` .
Now when move the mouse cursor on to the non-client area I want to load IDC_ARROW cursor i.e.,
::SetCursor(LoadCursor(NULL, IDC_ARROW));
When the moves on to the non-client area I am handling the mouse event in sheet derived class as follows,
MESSAGE_HANDLER(WM_NCMOUSEMOVE, OnNCMouseMove)
LRESULT OnNCMouseMove(UINT /*uMsg*/, WPARAM /*wParam*/, LPARAM /*lParam*/, BOOL& /*bHandled*/)
::SetCursor(LoadCursor(NULL, IDC_ARROW));
return 0;
This event is not getting triggered until unless the function in the Next button event is executed.
I want both of them to be done in parallel i.e, click Next button now hover mouse on the client area, Busy icon should come and when mouse moves out of the client area then IDC_ARROW icon should come.
LRESULT OnWizardNext()
::SetCursor(LoadCursor(NULL, IDC_WAIT));
m_bIsNextBtnIsClicked = TRUE;
BOOL bRet = MyFun();
m_bIsNextBtnIsClicked = FALSE;
//Until this function(MyFun()) is executed **WM_NCMOUSEMOVE**
//event is not getting triggered.But this event should get triggered and I
//should be able to see the change of cursor within and out of client area.
Can anyone kindly help me to solve this issue.
SivaV

Hello
sivavuyyuru,
For this issue, I am trying to involve someone to help look into, it might take some time and as soon as we get any result, we will tell you.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Expanding movieclip when mouse go out and shrinking it when mouse go in

Dear all friends,
I have movieclip called view_mc and button called btn_scale.
I want when the user click and drag the button btn_scale, he can scale the movieclip view_mc.
but when he goes out with the mouse, the movieclip is expanding.
and when he goes in, the movieclip is shrinking.
I have written the code, but it does the opposite: when he goes out, it shrinks. and when goes in, it expands:
var clickedX:Number;
var clickedY:Number;
var newScale:Number;
stage.addEventListener(MouseEvent.MOUSE_DOWN, on_stage_down);
stage.addEventListener(MouseEvent.MOUSE_UP, on_stage_up);
function on_stage_down(e:MouseEvent):void
if(btn_scale.hitTestPoint(stage.mouseX, stage.mouseY))
clickedX = stage.mouseX - view_mc.x;
clickedY = stage.mouseY - view_mc.y;
newScale = view_mc.scaleX;
view_mc.addEventListener(Event.ENTER_FRAME, on_enter_scale);
function on_enter_scale(e:Event):void
if(view_mc.width < restricted.width && view_mc.height < restrictedArr.height)
view_mc.scaleX = newScale * (clickedY / stage.mouseY);
view_mc.scaleY = view_mc.scaleX;
function on_stage_up(e:MouseEvent):void
view_mc.removeEventListener(Event.ENTER_FRAME, on_enter_scale);
Please help me to do the right scaling.

iOS: Troubleshooting FaceTime and iMessage activation
FaceTime, Game Center, Messages: Troubleshooting sign in issues

Problems with bluetooth connection to wireless mouse and keyboard

I am using a mac book (aluminium) with 10.6.4 with a Cinema Display and a wireless keyboard and mouse. My time capsule is located only 1 meter away from the mac book and every time the automatic sync starts my mouse and keyboard do not repsond anymore. It seems that the bluetooth connection is somehow heavily loaded due to the network traffic. I have updated all devices and restarted the computer several times. It always keeps on doing that. Any help?

philip_axmann wrote:
every time the automatic sync starts my mouse and keyboard do not repsond anymore.
what you are seeing is called _*wireless interference*_.
change the channel your TC broadcasts on.
JGG
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

Mac allowing random Bluetooth connection

Over the last few days I've noticed a random connection to my Bluetooth on my MacBook Pro. The connection is listed as someone else's MacBook Air. The only neighbour I have is a couple in the apartment above me, so I assume it's them.
The problem is, I've never been prompted to allow this pairing/connection and it keeps happening. The device is listed in the toolbar as connected (see image), but if I go to Bluetooth settings it doesn't show up, so I can't remove/block it. All I can do is select the 'disconnect' option from the toolbar, but within an hour or two it's normally reconnected.
Any suggestions on how I can block this device .... or am I going to have to pay a visit to my random neighbour?!

Yep mines doesn't come on quickly so if I am on the phone getting in the car it might take a few minutes then the bluetooth all of a sudden kicks in and switches over in the car. This bluetooth is not working very well. I wish Apple will go back to the USB port. I don't know why they took this feature from us in the car. This *****!

Can radiation affect the bluetooth connection to my mouse/keyboard?

The nature of the gremlins I am experiencing almost on a daily basis would suggest not, for instance the mouse appears to lose part of it's functionality a lot. If it was radiation that was the cause then my instincts would tell me that the whole things would cease to operate.
It is also far too sporadic for this to be a likely cause.
I'm only a semi skilled microwave engineer though, so I can't be sure what is causing this.

No you might be correct in one way or another.
I just did my first 10 hour long Time capsule backup with wifi and all through that my wireless mouse and keyboard and no end of problems with slow mouse reactions and the keyboard kept disconnecting.
This could be caused by other things I guess perhaps even a microwave for example when you don't have things like airport on much. Of course they always have the "this device must except any interference" type clause somewhere as standard to all radio products so it can't be helped.
I have heard of changing channels with airport can help certain problems but I don't think it will and I cba to try see.

RV082 V03 Randomly connection lost when firewall enabled.

Hardware: RV082 V03
Firmware: RV0XX-v4.2.1.02
Lan: 192.168.1.0/255
Static routing: 192.168.1.239 to 172.25.152.64/224
The unit is configured as internet gateway. 4 NAT ports are active.
When firewall disabled all works fine.
When firewall enabled I do get connection lost at random interval.
In firewall only 4 rules added to the default 3 rules. The added rules are:
1/ permit 192.168.1.22 port 25 to any
2/ permit 192.168.1.27 port 25 to any
3/ permit 192.168.1.10 port 25 to any
4/ deny any port 25 to any
I do get at random times connection lost when navigating with windows explorer on a PC with IP 192.168.1.x to a share on a PC with IP 172.25.152.74. The same happens when copying files. Sometimes it works, later it fails or reties are needed. When the firewall is switched off all runs fine.
Ping from 192.168.1.x to 172.25.152.74 allways give a <1ms response
Is there a RV082 perfomance problem or do I have a configuration problem?
Any help appreciated,
Maxim

Hi Maxim De Waele
In an access list, there is always an implicit rule at the end, this rule is:
deny any any,
For this reason your firewall does not work well, if you want to fix it, at the end you add the next statement:
permit ip any any,
It permits the traffic flow through the network, except that was previously denied,or manually you can allow only certain IP addresses.
This is an example of the configuration:
permit 192.168.1.22 port 25 to any
permit 192.168.1.27 port 25 to any
permit 192.168.1.10 port 25 to any
deny any port 25 to any
permit any to any
If this answer was satisfactory for you, please mark the question as Answered.
Thank you
Greetings, Johnnatan Rodriguez Miranda

Desktop Software for PC - Windows 7 Bluetooth Connection

Hi All,
Here's what I've got hardware wise Software all updated on all below..
BlackBerry 9900
Desktop PC with no Bluetooth built in
USB Bluetooth and Drivers
When installing the Bluetooth USB and it's drivers I don't get any option to allow Bluetooth connections the box is grayed out. In turn I can't sync the phone or do anything. I think this is more of a Windows Driver problem but just wondering if anyone else is having the same trouble and found a fix
Many thanks
@pauldeans

Try the solution I've posted here:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/I-need-the-old-Blackberry-Desktop-sof...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Bluetooth Connection Gone

Yesterday I noticed that my bluetooth symbol in the top right hand corner had a line going through it, and it says when clicking on it that the connection is unavailable. I tried connecting my bluetooth mouse to it, and it wouldn't connect. I try and pull up the bluetooth status menu, and it says it can't because I don't have a bluetooth module installed. I don't always use my bluetooth mouse, and I haven't done anything with the bluetooth settings. Under system preferences I think there is suppose to be a bluetooth button but it's not there. I don't know what happened.

I've had some experience with this problem. I think it is software, not hardware - at least in my case. I've seen plenty of posts about it - with differing solutions.
My problem was on both occasions an intermittent bluetooth connection. When it failed the system profiler would report that there was no bluetooth module. Of course the Macbook Pro has it built in.
I had upgraded to 10.5.6 the first time it occurred. I eventually managed to rectify the problem for a while by running the combo upgrade installer. After a few weeks the problem returned. This time after a while bluetooth mostly did not appear at all.
Next time I was very close to putting the mac in for hardware repair. I had tried the combo installer, a Leopard re-install from the beginning, PRAM zapping et al. No luck. Hardware test showed no issues.
Then I installed and ran Applejack: http://sourceforge.net/projects/applejack/
All fixed!
I don't know what Applejack did - but it changed permissions on some files and I suspect the problem was there.
Any way - before you head in for repair - try Applejack.
Good luck!
Message was edited by: GoldenWattle

Bluetooth connectivity and beeping during calls after lollipop update

After this update I have had problems with the bluetooth audio cutting out. Also during calls a strange beeping sound can be heard every minute. Is anyone else having this issue?

Couple of other ideas looking around on the web, try hardwired headphones and see if the problem does indeed go away (narrows it down to bluetooth only), if you are playing back from sd card try moving to phone to see if that solves it (some people have seen similar issues with failing micro sd cards). You aren't by chance getting notifications when the drop outs happen? It could be muting the audio to playback notification but not playing back the notification (just a thought). Try different apps for playback assuming you are listening to music.
BTW how do you like the Gear circle (other than the cutout issue)?

Bluetooth LED notification bug on 8130

I have also had the problem with Bluetooth connections dropping when the LED notification is disabled. Does anyone know if RIM is aware of this problem and will fix it? At night in the car it's extremely distracting.

I don't have a PIN lock set up, but still LED notifications for missed calls don't work on my Pre (GSM, o2 Germany), not even after waking up the screen. At least if I only have one missed call. Strangely enough, as soon as I have a second missed call, the LED starts to blink.
My guess is it has to do with the way the phone notifies about missed calls. With only one missed call I don't see a normal notification at the bottom of the screen, but a question dialog with two buttons "call back" and "close". Maybe the phone doesn't treat this as a real notification which would trigger the LED.
As soon as a second call comes in and is not answered, the first missed call notification becomes a real one-line notification at the bottom and the second call gets this question dialog, so maybe this is what triggers the LED notification. But I'm just guessing.
Anyway, this is really annoying. I can't understand why things like these are not found and fixed during testing of the update, this is pretty basic stuff, not any extraordinary user behavior.

My iMac lost Bluetooth connections for keyboard an d keypad how can I reset it?

First the keypad list it's Bluetooth connection then when I used the Bluetooth assistant it lost the keyboard . How can I re establish connections? Batteries are good.

If you connect the iPod to the computer (with the iTunes library) that was previously used to sync the iPod, it should unlock. If that's not possible, you should be able to connect the iPod to the current computer, and use the current iTunes library to Restore the iPod. The Restore button is on the iPod's Summary screen in iTunes. This will erase the iPod and give it a fresh start.

My computer was trying to connect to my Bluetooth mouse but I accidentally hit cancel so now my computer won't connect to my mouse. I turned my computer off. When I turned it back on it still won't connect and I can't login! Help!

NEED URGENT HELP!
My computer was trying to connect to my Bluetooth mouse but I accidentally hit cancel so now my computer won't connect to my mouse. I turned my computer off. When I turned it back on it still won't connect and I can't login! Help!

Reset the SMC.
Barry

Mac Mini crashes when connected to USB mouse!

This problem just happened all of the sudden--I came into my office a few days ago and there was the multi-lingual screen of death telling me I needed to restart my computer. Tried numerous times, no success--same message.
Took Mac Mini to Genius Bar--they said it checked out just fine.
Brought it home, plugged everything in--same problem!
Started eliminating USB and Firewire items that I was connecting to it. Narrowed it down to my Verbatim USB wireless mouse. When I disconnected it, the computer booted fine. However, can't navigate anywhere w/o a mouse, so I figured my solution was to just go buy a wired USB mouse.
Bought wired USB mouse. Same crashes! My computer will not boot with any USB mouse connected and when I connect a mouse after it is booted, it crashes the moment the mouse is connected.
Even if there is something I could install or uninstall, I can't do it because I have no navigation w/o a mouse!
Error messages on screen of death have to do with "kernels" and what not--again, if it was something I could replace/reinstall that would be great, but how can I do anything w/o a mouse?
Please help!!!
Thanks,
Phil

I have three 2008 model Mac minis, each with verbatim mice. Luckily one hasn't been upgraded to 10.6.8 because I'd be without a working desktop machine.
The 2010 Mac mini doesn't have this problem.
So far I've tried four different USB mice and all of them lock up the machine, even in safe mode.
I can't afford to go and buy three apple Bluetooth mice - it's the only way I can use these machines.
I hate downgrading machines, so I'm hoping apple supplies a patch soon.

Random bluetooth connection notifications when mouse is out of reach

Similar Messages

Maybe you are looking for