Mac allowing random Bluetooth connection

Over the last few days I've noticed a random connection to my Bluetooth on my MacBook Pro. The connection is listed as someone else's MacBook Air. The only neighbour I have is a couple in the apartment above me, so I assume it's them.
The problem is, I've never been prompted to allow this pairing/connection and it keeps happening. The device is listed in the toolbar as connected (see image), but if I go to Bluetooth settings it doesn't show up, so I can't remove/block it. All I can do is select the 'disconnect' option from the toolbar, but within an hour or two it's normally reconnected.
Any suggestions on how I can block this device .... or am I going to have to pay a visit to my random neighbour?!

Yep mines doesn't come on quickly so if I am on the phone getting in the car it might take a few minutes then the bluetooth all of a sudden kicks in and switches over in the car.  This bluetooth is not working very well.  I wish Apple will go back to the USB port.  I don't know why they took this feature from us in the car.  This *****!

Similar Messages

  • Random bluetooth connection notifications when mouse is out of reach

    My MB Pro randomly shows 'connected' and 'connection lost' notifications (as if the mighty mouse I use at work is getting (un)connected) when my mighty mouse is out of reach. The MB does this whenever it wakes up and shows both notification messages alternately for about 7 or 8 times. Also, when I look at the bluetooth settings in System Preferences, sometimes it says that the mighty mouse is connected, while it is not even in the room.

    Maybe best to start fresh and factory reset your band and unpair from your phone and restart the whole pairing
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • Mac OSX Lion Bluetooth Connectivity Issue

    When going from one workstation to another with external monitors, wireless keyboards and trackpads - there seems to be an issue with bluetooth connectivity. Bluetooth does not recognize signals from the next set of devices. The problem does not occur if the notebook is used normally in between (without the external hardware).
    I have wiped out my bluetooth devices for both workstations and reconnected them from scratch. That did not work. I even installed a fresh copy of Lion but the problem still exists. My macbook pro is a late 2010 edition - 2.66 ghz i7 for reference.

    I can't help you with your problem, but maybe this is a good start:
    http://kb2.adobe.com/cps/905/cpsid_90508.html#main_Flash_Builder
    ..... About that... have you encountered any other issue when using FB 4.5.1 with OS X 10.7.0?

  • Mac Mini and Bluetooth connectivity

    Can I install an Apple magic mouse and magic trackpad with my Mac Mini (early 2009) using OS X Lion ?  Anybody have this set-up ?  Any issues with having both active bluetooth devices ?  I'm currently using the magic mouse and want to add the trackpad when I upgrade from Snow Leopard to Lion.

    It will see each device as a unique BT device and there should be no issues pairing both. I do not have a M Trackpad, but as an experiment, I paired two Magic Mouses. No issues.

  • Mac as a Bluetooth Audio Gateway?

    Hmmm, is there any application that will allow me to use my Mac as a Bluetooth-based audio gateway? I know BluePhoneElite does this, but it's slow because my phone doesn't allow multiple bluetooth connections. i'd like to have the audio on all the time, so, anything the phone would sent to a regular headset would sent it to the computer.
    So, got any ideas for a constant BT audio gateway app for Mac?

    I have been trying to do something similar. I got it to work between
    a PC on XP and the mini in Vista/Bootcamp. In Mac OS it will
    connect (as a headset..) and it will show it as getting input
    but I think it treats it as a headset and you would need to
    open the input with something like audacity.
    It will only send mono audio as far as I saw - I think its not
    been designed to do this though it should be fully capable,
    at least from my perspective :P
    In your case trying opening up audacity might work to see it
    function, but I know in Linux it will open the mic/input line
    regardless of if you are recording in a program or not.

  • TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work).  "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
    That will let you select the "turn on Bluetooth" icon.

  • Just made the pc to Mac jump. Can I connect my iPad to my Mac Mini via Bluetooth ...my current keyboard isn't connecting so I can't even get passed the password screen.

    Someone please help me connect my two devices together so that I don't have to purchase yet another item. Is there an app or something that would allow me to connect my Mac Mini to my iPad 2 wirelessly. I can't get passed the password screen because the wireless Keyboard will no longer connect to my Mac ...helllllppp .... I use it for both my iPad and my Mac mini....does that matter?

    If your iPad is close enough to your keyboard and Mini
    and if the iPad is merely in standby and not off, the
    connection to the iPad is still active.  Therefore, the
    keyboard will not connect to the Mini.
    If the iPad is far enough away to break the Bluetooth
    connection or you unpair from the iPad or you turn the
    iPad off, then the keyboard should connect just fine with the Mini.
    Most Bluetooth HID's (Human Interface Device) can only service
    one host at a time.  This is by design. 

  • Recently upgraded Mac OS to 10.5.5 - have an older G4 which is max'd out upgrade-wise - both processor and OS. At present Safari is 3.1.2. Itunes is 9.2.1. Itunes will not allow me to connect to store - says it requires Safari 4.0.3 - however, when I try

    Recently upgraded Mac OS to 10.5.5 - have an older G4 which is max'd out upgrade-wise - both processor and OS. At present Safari is 3.1.2. Itunes is 9.2.1. Itunes will not allow me to connect to store - says it requires Safari 4.0.3 - however, when I try to download Safari 4.0.3 or newer it says it requires an older version of the OS. What to do?

    Update v10.5.5 to v10.5.8
    Download and install the  combo >  Mac OS X 10.5.8 Combo Update
    Then restart your Mac.
    That should update Safari for you to 5.0.6 and that should help with iTunes.
    If necessary, after updating to v10.5.8, you can use the standalone Safari installer here >  Safari 5.0.6 for Leopard

  • Mac mini, bluetooth connection problems

    Hi, My mac mini (latest model) has recently got problems with the bluetooth connections to the keyboard and the mouse.
    It seems to be some kind of interference to the wireless signal that makes the KB/Mouse to lose connection, and then
    connect again.
    I assume that it was one recent update that caused this as it worked without any problems for months before it
    started by itself.
    Any tips?

    https://discussions.apple.com/message/20738621#20738621
    2012 Mini Bluetooth/USB3 Interference: Apple Support Communities
    http://blog.macsales.com/15990-shielding-resolves-usb-3-0-conflict-with-bluetoot h

  • What does connecting iPad mini to my Mac Mini  through Bluetooth do

    what does connecting iPad mini to my Mac Mini  through Bluetooth do

    There is nothing else you can do as regards the Mac. Bluetooth between a Mac and an iOS device works only for tethering so you can share the iOS device's cell connection. Otherwise, Bluetooth in an iPad is for connecting to peripherals such as headsets, in-car systems, and keyboards.
    Regards.

  • Bluetooth connection between iPad and Mac keeps dropping out. I want to see the email drafts of iPad on the Mac All software up to date

    Trying to connect iPad Air latest version to a Mac Mini running Yosemite .Connection is made by Bluetooth (hoping to access the Drafts folder of the iPad  to lift off attachments to Mac mini) BUT the connection drops out after 20" or so.

    Jailbroke?

  • Bluetooth connection with Mac Book Pro

    How do I set up a Bluetooth connection with my Mac Book Pro?

    I'm trying to set up the Blue Tooth connection so I can use internet tethering from my iPhone to my MacBook Pro. I have already set up the USB option and that works well on my Rogers network. I've achieved Bluetooth paring between the iPhone and MacBook, but I can't get them to connect.
    I'm using Snow Leopard, if that makes any difference.
    Any ideas?

  • Is there an adaptor or interface that will allow me to connect a thunderbolt device to my late 2011 Mac Pro Firewire 800 port?

    Is there an adaptor or interface that will allow me to connect a thunderbolt device to my late 2011 Mac Pro Firewire 800 port?

    lllaass is correct.
    To use ThunderBolt devices, a computer must have left the factory with a ThunderBolt port.
    There are no known work-arounds, and there are not likely to be any because Intel controls the chips and is not interested in anything less than the full [including Video features] implementation.

  • Bluetooth connection between Mac book pro and IPad

    Hello,
    i am having trouble creating a Bluetooth connection between a Mac book pro running Mac OS X 10.6.8 and a IPad air 2 iOS 8.1.2.
    I have managed to pair the devices but when I try to create a connection to transfer data an error message on the Mac comes up saying "Bluetooth network unavailable, make sure device is on, in range and set up properly", similarly if a connection is tried from the iPad an error message comes up saying "make sure the device is on".
    Both devices Bluetooth is on and discoverable and i have managed to pair them but can't create a actual connection!
    Any help / ideas appreciated?
    Best regards

    Bluetooth paring for file transfer is not supported on iPads.
    You can use Airdrop if both devices support it, or a 3rd party App, but you cannot directly pair an iPad to a Macbook and transfer a file over the bluetooth connection.

  • BlueTooth Connection Allow Ignore Prompt for Car

    Everytime I start my car (which is already paired to my iPhone 4S), the system prompts to allow or ignore the bluetooth connection. I have to press Allow to continue to connect for all audio features. My phone (calls) work fine and auto-pair. This is only for the entertainment features (Pandora, etc). I have a Honda Accord 2013 with HandsFreeLink but I am guessing the question is more general. Is there a way to turn off the prompt to connect each time and force the phone to autoconnect? Again, I am already paired for phone calls, this is just for audio features. Thanks!

    The message is on the phone, not on the car system. It shows on the lock screen about 75% of the time I get in and start the car. Until I press the Allow button on the phone, the system will not connect. I included a screen grab from the phone to see if that helps.

Maybe you are looking for

  • Fixed Asset there are 2 activities with the same name.

    Hi, I have a question about 2 transaction in ORFA transaction. There are 2 activities with the same name, I don't know If I chose the first or the second activity for customizing Revaluation Areas.

  • Custom column headers

    How can I get a column header to span 2 columns in my report region? Each data column should have its own heading as well. In addition, this column header should be dynamic (well, not that dynamic, just to_char(sysdate,'yyyy')) Help? Thanks

  • SharePoint Online, Stop Workflow when Item Changed

    Hello, I have a workflow that sends an email to certain individuals upon creation and then sends a follow up reminder in 30 days if a specific field has not been changed.  I want to edit that workflow to only send the reminder if the list item has no

  • Why do i get an error about '/var/ldap/ldap_client_file'

    Why do some of my servers authenticating with LDAP have this error and others don't use /var/ldap/ldap_client_file at all? Unable to load new information from configuration file '/var/ldap/ldap_client_file' ('Configuration Error: No entry for 'NS_LDA

  • 64-bit Boot Image Drivers Are Not Working

    I've been deploying Windows 7 x86 and x64 for years. I've been using the same 32-bit boot image for both and it's been working great. We've decided to take the plunge and go all x64 moving forward.  I want to switch to a 64-bit boot image so I don't