Random shutdown request from imac 2008
I am suffering from a random shutdown/restart request on my imac. The screen goes dark from the top downwards and then the restart request appear.
Error logs
First
Sun Feb 24 20:29:16 2013
panic(cpu 0 caller 0x001AB0FE): Kernel trap at 0x00000000, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x011bc000, CR4: 0x00000660
EAX: 0x345bfec8, EBX: 0x05595784, ECX: 0x00000000, EDX: 0x004fe6ac
CR2: 0x00000000, EBP: 0x345bfee8, ESI: 0x05595750, EDI: 0x04b4ce44
EFL: 0x00010206, EIP: 0x00000000, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000010
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x345bfc98 : 0x12b4c6 (0x45f91c 0x345bfccc 0x13355c 0x0)
0x345bfce8 : 0x1ab0fe (0x469a98 0x0 0xe 0x469248)
0x345bfdc8 : 0x1a1713 (0x345bfde0 0x4b28468 0x345bfee8 0x0)
0x345bfdd8 : 0x0 (0xe 0x5580048 0x470010 0x10)
0x345bfee8 : 0x36d119 (0x4b44db0 0x5595750 0x4b4ce44 0x52cbc0)
0x345bff28 : 0x36d1d5 (0x0 0xa 0x345bff5c 0x1)
0x345bff78 : 0x3e3a7f (0x4b4ce44 0x52cdd00 0x52cdd44 0xffffffff)
0x345bffc8 : 0x1a1c0a (0x549e180 0x0 0x1a40b5 0x549e180)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbfffea68
BSD process name corresponding to current thread: SystemUIServer
Mac OS version:
9L31a
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 47571745594
unloaded kexts:
(none)
loaded kexts:
com.avast.PacketForwarder 1.3
com.avast.AvastFileShield 1.0.1
com.apple.driver.AppleBluetoothMultitouch 32.7 - last loaded 14541560139
com.apple.driver.IOBluetoothHIDDriver 2.1.10f2
com.apple.driver.AppleMultitouchDriver 194.28
com.apple.driver.InternalModemSupport 2.4.0
com.apple.filesystems.autofs 2.0.2
com.apple.driver.AppleHDAPlatformDriver 1.7.1a2
com.apple.iokit.IOBluetoothSerialManager 2.1.10f2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.1.10f2
com.apple.driver.AppleHDAHardwareConfigDriver 1.7.1a2
com.apple.driver.AppleUpstreamUserClient 2.7.5
com.apple.driver.AppleHDA 1.7.1a2
com.apple.kext.ATY_Hypoprion 5.4.8
com.apple.driver.AppleHWSensor 1.9d0
com.apple.driver.AppleGraphicsControl 2.8.15
com.apple.Dont_Steal_Mac_OS_X 6.0.3
com.apple.driver.AppleHDAController 1.7.1a2
com.apple.iokit.IOFireWireIP 1.7.7
com.apple.driver.AppleIRController 113
com.apple.ATIRadeonX2000 5.4.8
com.apple.driver.AudioIPCDriver 1.0.6
com.apple.driver.ACPI_SMC_PlatformPlugin 3.4.0a17
com.apple.driver.AppleLPC 1.3.1
com.apple.driver.AppleBacklight 1.6.0
com.apple.driver.AppleTyMCEDriver 1.0.0d28
com.apple.driver.AppleHIDKeyboard 1.0.9b4
com.apple.driver.AppleUSBMergeNub 3.5.2
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.1.1
com.apple.iokit.SCSITaskUserClient 2.1.1
com.apple.driver.XsanFilter 2.7.91
com.apple.iokit.IOATAPIProtocolTransport 1.5.3
com.apple.driver.AppleUSBHub 3.4.9
com.apple.iokit.IOUSBUserClient 3.5.2
com.apple.iokit.IOAHCIBlockStorage 1.2.2
com.apple.driver.AppleFileSystemDriver 1.1.0
com.apple.iokit.AppleYukon2 3.1.13b2
com.apple.driver.AirPortBrcm43xx 367.91.22
com.apple.driver.AppleFWOHCI 3.9.7
com.apple.driver.AppleAHCIPort 1.7.0
com.apple.driver.AppleIntelPIIXATA 2.0.1
com.apple.driver.AppleUSBEHCI 3.4.6
com.apple.driver.AppleUSBUHCI 3.5.2
com.apple.driver.AppleEFINVRAM 1.2.0
com.apple.driver.AppleRTC 1.2.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIPCI 1.2.5
com.apple.driver.AppleACPIButtons 1.2.5
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.2.5
com.apple.driver.AppleAPIC 1.4
com.apple.security.seatbelt 107.12
com.apple.nke.applicationfirewall 1.8.77
com.apple.security.TMSafetyNet 3
com.apple.driver.AppleIntelCPUPowerManagement 76.2.0
com.apple.driver.DiskImages 199
com.apple.BootCache 30.4
com.apple.iokit.IOSerialFamily 9.4
com.apple.driver.AppleUSBBluetoothHCIController 2.1.10f2
com.apple.iokit.IOBluetoothFamily 2.1.10f2
com.apple.driver.DspFuncLib 1.7.1a2
com.apple.iokit.IOHDAFamily 1.7.1a2
com.apple.iokit.IOAudioFamily 1.6.9fc5
com.apple.kext.OSvKernDSPLib 1.1
com.apple.driver.IOPlatformPluginFamily 3.4.0a17
com.apple.iokit.IONDRVSupport 1.7.3
com.apple.iokit.IOGraphicsFamily 1.7.3
com.apple.driver.AppleSMC 2.3.1d1
com.apple.iokit.IOUSBHIDDriver 3.4.6
com.apple.driver.AppleUSBComposite 3.2.0
com.apple.iokit.IOSCSIBlockCommandsDevice 2.1.1
com.apple.iokit.IOBDStorageFamily 1.5
com.apple.iokit.IODVDStorageFamily 1.5
com.apple.iokit.IOCDStorageFamily 1.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.1.1
com.apple.iokit.IO80211Family 216.1
com.apple.iokit.IONetworkingFamily 1.6.1
com.apple.iokit.IOFireWireFamily 3.4.9
com.apple.iokit.IOAHCIFamily 1.5.0
com.apple.iokit.IOATAFamily 2.0.1
com.apple.iokit.IOUSBFamily 3.5.2
com.apple.driver.AppleEFIRuntime 1.2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.iokit.IOStorageFamily 1.5.6
com.apple.iokit.IOHIDFamily 1.5.7
com.apple.driver.AppleACPIPlatform 1.2.5
com.apple.iokit.IOACPIFamily 1.2.0
com.apple.iokit.IOPCIFamily 2.6
And the last
Mon Mar 4 19:17:42 2013
panic(cpu 1 caller 0x001AB0FE): Kernel trap at 0x00180098, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000004, CR3: 0x25da8000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000014, ECX: 0x00548898, EDX: 0x00000098
CR2: 0x00000004, EBP: 0x3481bda8, ESI: 0x02a331e8, EDI: 0x00000013
EFL: 0x00010207, EIP: 0x00180098, CS: 0x00000008, DS: 0x0b590010
Error code: 0x00000002
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x3481bb98 : 0x12b4c6 (0x45f91c 0x3481bbcc 0x13355c 0x0)
0x3481bbe8 : 0x1ab0fe (0x469a98 0x180098 0xe 0x469248)
0x3481bcc8 : 0x1a1713 (0x3481bce0 0x2e9b1af0 0x3481bda8 0x180098)
0x3481bcd8 : 0x180098 (0xe 0x48 0x34810010 0x160010)
0x3481bda8 : 0x181064 (0x305e2000 0x1 0x1008000 0x2)
0x3481bde8 : 0x163538 (0xb59a834 0x9000 0x0 0x3)
0x3481bf58 : 0x1ab39c (0x1a9445c 0x305e3000 0x1 0x3)
0x3481bfc8 : 0x1a160d (0x4cc23c4 0x0 0x1a40b5 0x4cc23c4)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0x5fbf80b0
BSD process name corresponding to current thread: Adobe Lightroom
Mac OS version:
9L31a
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 267824894919
unloaded kexts:
com.apple.driver.InternalModemSupport 2.4.0 - last unloaded 143842028782
loaded kexts:
com.apple.driver.AppleBluetoothMultitouch 32.7 - last loaded 24409145975
com.apple.driver.IOBluetoothHIDDriver 2.1.10f2
com.apple.driver.AppleMultitouchDriver 194.28
com.apple.driver.InternalModemSupport 2.4.0
com.apple.filesystems.autofs 2.0.2
com.apple.driver.AppleHDAPlatformDriver 1.7.1a2
com.apple.iokit.IOBluetoothSerialManager 2.1.10f2
com.apple.driver.AppleHDAHardwareConfigDriver 1.7.1a2
com.apple.driver.AppleHDA 1.7.1a2
com.apple.driver.AppleUpstreamUserClient 2.7.5
com.apple.kext.ATY_Hypoprion 5.4.8
com.apple.driver.AppleHWSensor 1.9d0
com.apple.driver.AppleGraphicsControl 2.8.15
com.apple.Dont_Steal_Mac_OS_X 6.0.3
com.apple.driver.AppleTyMCEDriver 1.0.0d28
com.apple.driver.AppleHDAController 1.7.1a2
com.apple.iokit.IOFireWireIP 1.7.7
com.apple.driver.AppleIRController 113
com.apple.driver.AudioIPCDriver 1.0.6
com.apple.driver.ACPI_SMC_PlatformPlugin 3.4.0a17
com.apple.driver.AppleLPC 1.3.1
com.apple.driver.AppleBacklight 1.6.0
com.apple.ATIRadeonX2000 5.4.8
com.apple.driver.BroadcomUSBBluetoothHCIController 2.1.10f2
com.apple.driver.AppleHIDKeyboard 1.0.9b4
com.apple.driver.AppleUSBMergeNub 3.5.2
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.1.1
com.apple.iokit.SCSITaskUserClient 2.1.1
com.apple.driver.XsanFilter 2.7.91
com.apple.iokit.IOATAPIProtocolTransport 1.5.3
com.apple.driver.AppleFileSystemDriver 1.1.0
com.apple.driver.AppleFWOHCI 3.9.7
com.apple.driver.AppleUSBHub 3.4.9
com.apple.iokit.IOUSBUserClient 3.5.2
com.apple.iokit.IOAHCIBlockStorage 1.2.2
com.apple.driver.AppleUSBUHCI 3.5.2
com.apple.iokit.AppleYukon2 3.1.13b2
com.apple.driver.AirPortBrcm43xx 367.91.22
com.apple.driver.AppleAHCIPort 1.7.0
com.apple.driver.AppleIntelPIIXATA 2.0.1
com.apple.driver.AppleUSBEHCI 3.4.6
com.apple.driver.AppleEFINVRAM 1.2.0
com.apple.driver.AppleRTC 1.2.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIPCI 1.2.5
com.apple.driver.AppleACPIButtons 1.2.5
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.2.5
com.apple.driver.AppleAPIC 1.4
com.apple.security.seatbelt 107.12
com.apple.nke.applicationfirewall 1.8.77
com.apple.security.TMSafetyNet 3
com.apple.driver.AppleIntelCPUPowerManagement 76.2.0
com.apple.driver.DiskImages 199
com.apple.BootCache 30.4
com.apple.iokit.IOSerialFamily 9.4
com.apple.driver.DspFuncLib 1.7.1a2
com.apple.iokit.IOHDAFamily 1.7.1a2
com.apple.iokit.IOAudioFamily 1.6.9fc5
com.apple.kext.OSvKernDSPLib 1.1
com.apple.driver.IOPlatformPluginFamily 3.4.0a17
com.apple.driver.AppleSMC 2.3.1d1
com.apple.iokit.IONDRVSupport 1.7.3
com.apple.iokit.IOGraphicsFamily 1.7.3
com.apple.driver.AppleUSBBluetoothHCIController 2.1.10f2
com.apple.iokit.IOBluetoothFamily 2.1.10f2
com.apple.iokit.IOUSBHIDDriver 3.4.6
com.apple.driver.AppleUSBComposite 3.2.0
com.apple.iokit.IOSCSIBlockCommandsDevice 2.1.1
com.apple.iokit.IOBDStorageFamily 1.5
com.apple.iokit.IODVDStorageFamily 1.5
com.apple.iokit.IOCDStorageFamily 1.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.1.1
com.apple.iokit.IOFireWireFamily 3.4.9
com.apple.iokit.IO80211Family 216.1
com.apple.iokit.IONetworkingFamily 1.6.1
com.apple.iokit.IOAHCIFamily 1.5.0
com.apple.iokit.IOATAFamily 2.0.1
com.apple.iokit.IOUSBFamily 3.5.2
com.apple.driver.AppleEFIRuntime 1.2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.iokit.IOStorageFamily 1.5.6
com.apple.iokit.IOHIDFamily 1.5.7
com.apple.driver.AppleACPIPlatform 1.2.5
com.apple.iokit.IOACPIFamily 1.2.0
com.apple.iokit.IOPCIFamily 2.6
I have removed avast security and repaired disc permissions .Also carried ot AHT
Im in a panic now as well as my machine !
So, is Avast still showing up in the crash logs?
Have you blown the dust out lately?
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free Disk space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts?
Similar Messages
-
Hello everyone,
i know there are already a couple of questions on the forum here where it is described what the cause could be of an unexpectedly shutdown of an iMac, but none of the answers worked, I also have other console-messages. Please help, because i NEED my computer...
My logs:
4/04/10 18:22:53 kernel npvhash=4095
4/04/10 18:21:57 System Preferences[311] Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x2003addc0 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded)
4/04/10 18:22:53 kernel PAE enabled
4/04/10 18:22:53 kernel 64 bit mode enabled
4/04/10 18:22:53 kernel Darwin Kernel Version 10.3.0: Fri Feb 26 11:58:09 PST 2010; root:xnu-1504.3.12~1/RELEASE_I386
4/04/10 18:22:53 kernel vmpagebootstrap: 966149 free pages and 82427 wired pages
4/04/10 18:22:53 kernel standard timeslicing quantum is 10000 us
4/04/10 18:22:53 kernel migtable_maxdispl = 73
4/04/10 18:22:53 kernel AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
4/04/10 18:22:53 kernel AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
4/04/10 18:22:53 kernel calling mpopolicyinit for TMSafetyNet
4/04/10 18:22:53 kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
4/04/10 18:22:53 kernel calling mpopolicyinit for Quarantine
4/04/10 18:22:53 kernel Security policy loaded: Quarantine policy (Quarantine)
4/04/10 18:22:53 kernel calling mpopolicyinit for Sandbox
4/04/10 18:22:53 kernel Security policy loaded: Seatbelt sandbox policy (Sandbox)
4/04/10 18:22:53 kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
4/04/10 18:22:53 kernel The Regents of the University of California. All rights reserved.
4/04/10 18:22:53 kernel MAC Framework successfully initialized
4/04/10 18:22:53 kernel using 16384 buffer headers and 4096 cluster IO buffer headers
4/04/10 18:22:53 kernel IOAPIC: Version 0x11 Vectors 64:87
4/04/10 18:22:53 kernel ACPI: System State [S0 S3 S4 S5] (S3)
4/04/10 18:22:53 kernel mbinit: done (64 MB memory set for mbuf pool)
4/04/10 18:22:53 kernel rooting via boot-uuid from /chosen: 52915889-86A8-3376-A3BD-3ACE69F99020
4/04/10 18:22:53 kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
4/04/10 18:22:53 kernel com.apple.AppleFSCompressionTypeZlib load succeeded
4/04/10 18:22:53 kernel AppleIntelCPUPowerManagementClient: ready
4/04/10 18:22:53 kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/WDC WD6400AAKS-40H2B0 Media/IOGUIDPartitionScheme/Customer@2
4/04/10 18:22:53 kernel BSD root: disk0s2, major 14, minor 2
4/04/10 18:22:53 kernel jnl: unknown-dev: replay_journal: from: 26360320 to: 31435264 (joffset 0x12a1000)
4/04/10 18:22:53 kernel wl0: Broadcom BCM432b 802.11 Wireless Controller
4/04/10 18:22:53 kernel 5.10.91.27
4/04/10 18:22:53 kernel FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 00254bfffea74988; max speed s800.
4/04/10 18:22:53 kernel jnl: unknown-dev: journal replay done.
4/04/10 18:22:53 kernel AppleIntelCPUPowerManagement: initialization complete
4/04/10 18:22:53 kernel hfs: Removed 2 orphaned / unlinked files and 0 directories
4/04/10 18:22:47 com.apple.launchd[1] * launchd[1] has started up. *
4/04/10 18:22:53 DirectoryService[15] Improper shutdown detected
4/04/10 18:22:54 kernel NVEthernet: Ethernet address 00:25:4b:a7:49:88
4/04/10 18:22:54 kernel AirPort_Brcm43xx: Ethernet address 00:25:4b:8b:74:3e
4/04/10 18:22:54 kernel IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
4/04/10 18:22:54 kernel IO80211Interface::efiNVRAMPublished():
4/04/10 18:22:54 kernel systemShutdown false
4/04/10 18:22:54 blued[17] Apple Bluetooth daemon started
4/04/10 18:22:58 com.apple.SecurityServer[25] Session 0x5fbff962 created
4/04/10 18:23:00 bootlog[41] BOOT_TIME: 1270398163 0
4/04/10 18:23:00 fseventsd[34] event logs in /.fseventsd out of sync with volume. destroying old logs. (907 17 959)
4/04/10 18:23:00 fseventsd[34] log dir: /.fseventsd getting new uuid: 7486E2BB-7A67-41E8-8728-192A5D8F784F
4/04/10 18:23:03 kernel Waiting for DSMOS...
4/04/10 18:23:04 Parallels[62] Loading kernel extension prl_hypervisor.kext
4/04/10 18:23:04 mDNSResponder[29] mDNSResponder mDNSResponder-214.3 (Feb 11 2010 04:49:16) starting
4/04/10 18:23:04 com.apple.usbmuxd[21] usbmuxd-190 built for iTunesNineOne on Mar 8 2010 at 20:25:36, running 32 bit
4/04/10 18:23:04 com.apple.SecurityServer[25] Entering service
4/04/10 18:23:05 kernel AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
4/04/10 18:23:05 com.parallels.desktop.launchdaemon[45] objc[55]: Class QMacSoundDelegate is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
4/04/10 18:23:05 com.parallels.desktop.launchdaemon[45] objc[55]: Class QNSMenu is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
4/04/10 18:23:05 com.parallels.desktop.launchdaemon[45] objc[55]: Class QNSStatusItem is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
4/04/10 18:23:05 com.parallels.desktop.launchdaemon[45] objc[55]: Class QNSImageView is implemented in both /Library/Parallels/Parallels Service.app/Contents/MacOS/libQtGui.4.dylib and /usr/local/lib/libprl_sdk.dylib. One of the two will be used. Which one is undefined.
4/04/10 18:23:06 kernel NVDANV50HAL loaded and registered.
4/04/10 18:23:06 kernel Previous Shutdown Cause: -128
4/04/10 18:23:06 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[30] Login Window Application Started
4/04/10 18:23:06 Parallels[83] Loading kernel extension prlhidhook.kext
4/04/10 18:23:06 configd[13] bootpsessiontransmit: bpf_write(en1) failed: Network is down (50)
4/04/10 18:23:06 configd[13] DHCP en1: INIT-REBOOT transmit failed
4/04/10 18:23:06 Parallels[91] Loading kernel extension prlusbconnect.kext
4/04/10 18:23:06 kernel DSMOS has arrived
4/04/10 18:23:06 kernel /drv/ HypApic.c:234 Host APIC phy 0xFEE00000 lin 0x5d5e9000 ver 0x14
4/04/10 18:23:06 kernel /drv/ HypRealCpu.c:189 hypRealCpusInfoInit: STATUS_SUCCESS
4/04/10 18:23:06 kernel /drv/ HypLowCache.c:158 Low cache initialized (3904 kB for 8 VMs on 4096 MB)
4/04/10 18:23:06 kernel /drv/ HypModule.c:178 Parallels IPI irq = 0 ipi = 0(0x0)
4/04/10 18:23:06 kernel /drv/ HypModule.c:181 Parallels Hypervisor 4.0.3848.450204 loaded.
4/04/10 18:23:06 kernel NVEthernet::setLinkStatus - Valid but not Active
4/04/10 18:23:06 kernel /prl_hid/ Parallels HID Helper started.
4/04/10 18:23:06 configd[13] network configuration changed.
4/04/10 18:23:06 configd[13] setting hostname to "imac-van-arno-de-pachter.local"
4/04/10 18:23:06 configd[13] bootpsessiontransmit: bpf_write(en4) failed: Operation not permitted (1)
4/04/10 18:23:06 configd[13] DHCP en4: INIT transmit failed
4/04/10 18:23:07 kernel IOBluetoothBNEPDriver: Ethernet address 00:25:00:c7:32:23
4/04/10 18:23:07 Parallels[96] Trying to load kernel extensions, exit status: 0
4/04/10 18:23:07 Parallels[99] Starting Parallels networking...
4/04/10 18:23:07 Parallels[102] Loading kernel extension prl_netbridge.kext
4/04/10 18:23:07 Parallels[108] Loading kernel extension prl_vnic.kext
4/04/10 18:23:07 com.parallels.desktop.launchdaemon[45] No suitable device found for PVS1.
4/04/10 18:23:07 kernel com.parallels.kext.prlnet 4.0.3848.450204 has started.
4/04/10 18:23:07 kernel com.parallels.kext.vnic 4.0.3848.450204 has started.
4/04/10 18:23:07 kernel en1: 802.11d country code set to 'BE'.
4/04/10 18:23:07 kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
4/04/10 18:23:07 kernel comparallels_kext_prl_vnic_device0: Ethernet address 00:1c:42:00:00:08
4/04/10 18:23:07 kernel comparallels_kext_prl_vnic_device1: Ethernet address 00:1c:42:00:00:09
4/04/10 18:23:07 kernel Auth result for: 00:1e:c1:a1:ff:1a MAC AUTH succeeded
and so forth...
Please help, i don't know and google has no results.
I'm concerned about the "Previous Shutdown Cause: -128" line...
Thanks in advance
Arno De PachterMy iMac started doing this last week. Took to a local repair shop and they replaced the power supply under warranty. Didn't fix it.
I managed to get the os reinstalled tonight thinking that might help but it didnt.
I have a early '09 3.06 -
Delete Full Requests from an InfoCube with a BIA index on it
Hello all
I need to delete certain random Full requests from a cube which has both DB indexd and BIA index on it?
What will be the steps i should be following in regards to deleting/ rebuilding indexes ?
Regards
SanjyotThanks Vitaliy but I have multiple requests with huge amount of data to be deleted.
So I was wondering if the following steps are correct
1. delete DB indices
2. delete BIA indices
3. delete requests from cube
4. rebuild DB indices
5. rebuild BIA indices
Are there any steps to ensure that indices are rebuilt correctly?
Regards
Sanjyot -
HELP Please
When sending print request from iMac or MacBook Air Print Queue Initial displays are printer ready followed by:
* looking for printer
* connecgting to printer
* job printing (printers motor runs) bu no print-out
* job stopped on server
* no pages found comes up somtimes
these messages may be slightly different after "Hold" or "Pause Printer" but print never works.
have already deleted printer from "print & Scan" panel even reset print system and reinstalled printer
-note the printer is seen by the "Print & Scan" panel on using add printer (+ sign)
Before installing Mountain Lion there were no problems printing from iMac or MacBookAir.
Why would it work requesting prints thru LapTop PC on Win 7 but not from Mountain Lion? Apple please!Answer to self!
Xerox has just released an Update "Phaser_3140-3155_OS_10-8_print_Instaler_v5.0.0" this has resolved all my problems and may be usefull for some other people. Go to Website "http://www.support.xerox.com/support/phaser-3140" for download. -
So I just logged in to skype and found 2 random contact requests from I presume strangers. I have no idea who they are. I stupidly replied to one but got a reply back. So I was wondering was this a potential scammer? I've bot blocked and declined the contact request as well as launching a full computer scan and there is no potential threats found. Was I paranoid or was this a scam.
In your privacy setting there is an option to only allow messages, calls and such from people in your contacts. Just double check to make sure it's all checked properly
Attachments:
Rawr.JPG 68 KB -
Downgrading from Lion on Intel iMac (2008) problems
After upgrading to Lion on our iMac (2008) [Intel Core 2 Duo], which had been originally running 10.6.8, we began experiencing lots of strange problems (intermittent crashes, freezing). On Saturday, the whole computer just shutdown and couldn't be restarted.
I attempted to install a new OS from a Snow Leopard CD purchased when we upgraded from the original software (10.5.2) by first building a new partition (Mac OS Journaled, GUID) and then installing Snow Leopard, but at the very end of the process, got an error message stating the installation failed.
I then went back to the original installation disks that came with the iMac (10.5.2) and did the same process and have been able to get Leopard running. From that point, I thought I could pop the Snow Leopard install CD in and do the upgrade, but got the same error message stating the installation failed.
I'm now back to installing the original OS again (10.5.2), but am unsure how to go about getting Snow Leopard to install. Do I need to go through the software updates to get it up to 10.5.8 before installing Snow Leopard, or has Lion just done some irreparable harm to the system.
At various points during this whole process, I've sometimes been able to boot from the CD from startup by pressing C, but sometimes that fails, and I have to hold down the option key. Sometimes that even fails, and I've had to clear the memory, and restart, going through various iterations just to get the Mac to see the CD.
Any advice on how to get from Leopard to Snow Leopard would be much appreciated. Before Lion was involved, there were no problems in the upgrade process, but now that I'm trying to rebuild, it seems like things are going massively awry.
Also, it seems like the specs on Lion indicate it should be stable on this type of machine, but clearly it isn't. I've read about some incompatabilities with graphics cards (we have a NVIDIA GeForce 8800 GS), but I don't know if this was the problem or not. If anyone knows what could have happened with the Lion issue, I would be curious about that too.After "successfully" installing a version of 10.5.2 onto the iMac, I ran a Verify Permissions and received a long list of Open Error 5 problems, which could not be fixed using the Disk Utility on the Mac itself, nor with a downloaded copy of DiskWarrior. Also, when verifying the hard drive, there was an invalid sibling link error, and it stopped the verification process - there was no option to repair.
I'm a little confused because I started the clean install from the Disk Utility via the installation CD by building what I thought was a "clean" partition.
Is the next step to try and run disk utility from the install CD to try and fix these errors?
I now have a copy of Disk Warrior (downloaded) sitting on another machine and my Time Machine. I'm not sure how these could be useful in the rebuild process, but if so, please let me know.
Thanks so much,
Marie -
I have a Mac Pro 2008 and it was the best computer ever.
Lately about 2 months ago it started to randomly shutdown.
The computer would crash with no indication, the screen goes
to black and after about 10 seconds, the fan would run at full speed.
All the while the power never cuts off.
what is going on ?
any experience ?
Help is much appreciated as I can't get any work going on at this time.Start by cleaning out all the accumulated dust.
Do a smc and pram reset.
Boot from your recovery partition and repair/verify your drives (not repair permissions).
You might want to add a temperature monitor like iStat Pro, iStat Menus, Temperature Monitor, Hardware Monitor, etc. Maybe somthing is overheating.
Consider reseating your video card and dimms. -
Re I-MOVIE. I am getting a "Communication Error" when I try and send a clip to the IMovie
program in my IMAC 2008 Intel Chip computer. This is the first time in 3 years that the
program has not worked. What has gone wrong?Hi
Have no idea - But if it is a new problem with exactly the same kind of material that was previously used. Then my trouble shooting guide might help.
If You
• used a new Camera - file codec might be a sort that don't work
• Your main hard disk might get too filled up
Else try
Trouble
When iMovie doesn't work as intended this can be due to a lot of reasons
• iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
• Creating a new User-Account and log into this - forces iMovie to create all pref. files new and error free
• Event or Project got corrupted - try to make a copy and repair
• a codec is used that doesn't work
• problem in iMovie Cache folder - trash Cache.mov and Cache.plist
• version miss match of QuickTime Player / iMovie / iDVD
• preferences are wrong - Repair Preferences
• other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
• External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
• USB-flash-memories do not work
• Net-work connected hard disks - do not work
• iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie.
This You do by
_ close iPhoto
_ on start up of iPhoto - Keep {cmd and alt-keys down}
_ now select all five options presented
_ WAIT a long long time
• free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
• external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
• GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
• Screen must be set to million-colors
• Third-party plug-ins doesn't work OK
• Run "Cache Out X", clear out all caches and restarts the Mac
• Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
• Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
• In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W -
Apple TV sharing from IMAC 20 inch (2008)
is there a tutorial on how to share from my 2008 iMac to a phillips hd tv using apple tv?
Thanks Brian, Internet sharing is the term used in my iMac settings for using the iMac as a Wi-Fi network, we use this for iPhones, laptops etc as we dont have a wireless router. Did buy a wireless router but couldn't get it to work so thought we'd just keep using the iMac as it worked fine, until now. Apple TV connected to this network sucessfully for watching movies etc but not for Home Sharing so I wanted to find out if this was normal.
I have just spoken to Apple who let me know that this is indeed normal and that this type of network will work for movies etc but not for Home Sharing. So as you say will need to get a wireless router that works, or connect via ethernet (I didn't realise this was possible, but can see it now after going back to the little black manual)
Thanks Brian, thanks Winston, thanks Apple. -
Can I install 10.6 OS X from USB drive? Imac 2008 24"
Can I install 10.6 OS X from USB drive? Imac 2008 24"
Welcome to the Apple Support Communities
You can, but it's a bit difficult because you have to copy the Snow Leopard disc content to a USB drive. There are a lot of pages which have got the steps to install Mac OS X Snow Leopard from the USB drive, like this page > http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html -
Macbook won't detect external display anymore - Random shutdown injury??
Hi,
my Macbook has the dreaded random shutdown thing happening, often it can't even get through the startup sequence. If I reset the PMU and PRAM and check the disk every week I can keep it running. Applecare are making not particularly helpful suggestions like "run it in safe mode" - hello people, random means it can take days to happen again... I use this computer for work so I need it at full capacity every day!!!
Anyway, enough angry ranting. The casualty of today's RS and subsequent PRAM PMU resetting is my external display (Viewsonic LCD). The macbook is no longer sending signals to it (display says "no signal"). When I ask the macbook to "detect displays" nothing happens. I have restarted the macbook several times and unplugged and replugged the display connection it doesn't help. Yes, I have the AC power cable plugged in on the Macbook (I know it doesn't like talking to the screen if I don't).
The display and macbook have always worked fine together in the past...
Does anyone have any suggestions on how to test for causes or fix this display related problem?
MacBook Mac OS X (10.4.8)
Powerbook G4 Mac OS X (10.4.2)You don't mention ever having brought the problem to Apple's attention, or what resulted from your request for Apple's help with it. This isn't a universal or widespread problem. It may be a hardware fault in your own equipment that needs to be resolved with a repair, or it may be a software problem (corrupt file, incompatible software conflict, update needed, etc., etc.). You seem to think Apple should have fixed it for you without your lifting a finger, and you're eager to complain about Apple's lack of support. But you've offered nothing to indicate that Apple even knows you need support. You do have to ask for it. Have you done so?
We have no idea what steps you've taken to try to narrow down the possibilities, e.g., making sure the monitor is turned on; trying a different video cable as iVmichael has suggested; testing the monitor with the same cable on a different computer; testing a different monitor with the same cable and then with a diferent cable on your computer; substituting a different cable adapter, if you are using one; applying all applicable system software updates and then Repairing Permissions and Repairing Disk; starting in Safe Mode and seeing whether the monitor is recognized and activated then; seeing whether the monitor is detected in System Profiler; and so on. You may have done some of these things, but you haven't told us about them or about the results. -
To Everyone with Random Shutdowns! (Solved! REALLY!)
Hey all,
I had posted about a week back about my Macbook (Core duo white, late 2006), it was having the same symptoms as some of the others with the known random shutdown syndrome (RSS). Like many others I had thought it was the end of my macbook and the logicboard needed replacing because that is what the 'genius' people do, but I was still wondering what would cause it. It would randomly shut off! (or so I thought) I'd be typing in Safari, watching a youtube video, and even playing games, it would just shut off and I could hear the hard drive spin down. I'd restart and it would do it again sometimes right away, sometimes hours later.
This got me to thinking (like others have said) that it must be an issue with over heating. To test my theory I backed up my HD, and tried to reinstall Snow Leopard after zeroing the HD (as a fresh install). During the install process the Macbook's fan started to get loud and then it happened, it died again! So, this proved to me that it is NOT a software/OS issue at all, which means the said efforts in other posts of changing screen saver and energy saver settings had nothing to do with the cause! Aha moment!
I thought to myself... something is making it shutdown, obviously, and has to do with too much heat as the fan was going crazy even while reinstalling the OS. After reading many posts on different support forums I came accross the possibility that it could be the heatsink and/or sensor that is attached to it. I also found out that this "RSS" only applies to the non-unibody, core duo, and core 2 duo macbooks... you know what that means?
These models are the only ones with the shared memory and GPU on the same heatsink! GAH! A possible solution presents itself? To make a long post even longer... I removed the keyboard, carefully unscrewed the heatsink and fan and what did I see? Cracked and dried out thermal paste on the CPU AND GPU, they are both under the same heatsink after all, this was bad, really bad.
Luckily I had some Arctic Silver thermal paste in a tube from years ago when I upgraded my PowerMac CPU. Using some rubbing alcohol and a soft cloth I removed the crud on the heatsink, processor, and GPU (I might add that there was way too much paste on there in the first place). I waited an extra few minutes to make sure the alcohol evaporated, and then I applied a small (dime sized) amount of thermal past directly onto the two chips, I aligned the heatsink carefully and gave it a very small gentle push down onto the chips, reattached the sensor wire to the mainboard, and screwed the heatsink back in.
After putting the keyboard back on and making sure all screws were in... I immediately turned on the laptop and reinstalled the OS. The OS install took approximately 10 mintues! (crazy!) The last time I did that it took over 30 mins to install! I was stunned!
After the OS installed I let the computer idle and shut down, I let it sit for about an hour to allow the paste to contract as it cooled. After starting up again I immediately downloaded Temperature Monitor and installed it (I did have it running when my mac had RSS by the way), here are the results to prove my theory:
My Macbook with RSS:
CPU1 and CPU2 Idle temp - 114 degrees (F)
Heatsink temp - 128 degrees (F)
Approximate over heating temp - 184 degrees (F) (causing the heatsink sensor to shutdown the laptop)
My Macbook with new high quality thermal paste:
Idle temp of CPU1, CPU2, and GPU - 77 degrees (F)
Heatsink temp - 84 degrees (F)
Running temp with adobe CS4, youtube, and typing this message - 103 degrees (F)
Pretty amazing if you ask me!
Before I applied the thermal paste my Macbook took at least a minute to start up with a fresh OS install, now it only takes about 15 seconds! I have not heard the fan spin up and go crazy since! And I can't even explain to you how much fast it is now!
This does prove that Random shutdown syndrome (RSS) is caused ONLY by your GPU over heating due to old thermal paste between the chips and heatsink! A design flaw by Apple? probably not because thermal paste will crack and dry over time.
This also proves that energy conversion to data in the chips can decrease because of over heating, causing the computer performance to dramatically drop!
So before you take your out-of-warranty macbook to Apple or a repair shop, see what your internal temp readings are and try to replicate the problem with over heating your CPU/GPU! This was a 10 minute fix! I am still amazed at how much faster everything is, and haven't had a random shutdown since! I hope this helps alot of people that think they are out of luck and have to pay to get it fixed!
- Cory -I too have this problem as well and it has been getting worse lately, I don't know what to do anymore. Here is a little info about my macbookPro. I have the late 2008 unibody model, i bought it in late 2009 Refurbished from Apple. Recently my mac has been turning off out of nowhere. I may be doing something and all of a sudden it just shuts off, it usually happens faster when i start to open up more programs like Photoshop or Final Cut Pro. My mac is out of warranty now and i dont know how much apple is going to charge me to fix it. i mean they want 50 bucks just to talk to them on the phone (ridiculous if you ask me)!.
I have a temperature sensor installed and here is my data
CPU A Proximity: 126F
CPU A Temperature Diode: 133F
Graphics Processor Chip 1: 122F
Graphics Processor Heatsink 1: 113F
Graphics Processor Heatsink 2: 126F
Graphics Processor Temperature Diode: 131F
Left Palm Rest: 91F
Main Heatsink 3: 122F
Main Logic Board: 118F
Northbridge Chip: 127F
Northbridge Position: 124F
Here is more data from the Power
Battery Information:
Model Information:
Manufacturer: GSA-1281
Device Name: ASMB016
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 0
Hardware Revision: 0
Cell Revision: 0
Charge Information:
Charge Remaining (mAh): 3739
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 4610
Health Information:
Cycle Count: 68
Condition: Normal
Battery Installed: Yes
Amperage (mA): -1766
Voltage (mV): 11793
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 90
Automatic Restart on Power Loss: No
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: No
Display Sleep Uses Dim: Yes
GPUSwitch: 2
PrioritizeNetworkReachabilityOverSleep: 0
RestartAfterKernelPanic: 157680000
Battery Power:
System Sleep Timer (Minutes): 60
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 2
Wake on AC Change: No
Wake on Clamshell Open: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Reduce Brightness: Yes
RestartAfterKernelPanic: 157680000
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: No
Charging: No
PLEASE HELP ME, I CAN NO LONGER TRUST MY MAC FOR WORK. any replies will be appreciated. thanks -
Are the replacement Heatsinks fixing people's Random Shutdown problems?
Is the replacement heatsink (the shorter one) still the method of choice from Apple for fixing Random Shutdown problems?
Is it working for people who've had it done recently?Does this max out the CPU?
Yes. People who advocate this are testing to see if it's possible to induce a "random" shut down.
Why would anyone want to do that?
Good question. I've seen two reasons put forward: (a) It's better to make it happen now yourself rather let it strike out of the blue at some later date (and if running this test doesn't induce RSDs you can feel confident that your computer is probably immune); (b) If you take your MacBook to an Apple Store it could be useful for demonstrating to an Apple "genius" that your computer has the problem, especially if your shutdowns are infrequent.
(personally, I don't agree with (a))
MacBook (OS 10.4.8) iMac G4 (OS 10.3.9) -
Overheating or random shutdown?
Last night I while I was using my iMac it randomly shutdown twice, one right after another.
I have had the random shutdown problem in the past but have not experienced one for quite some time. (I had taken several steps to fix, including running the disk utilities and deleting some power management file. Whatever I did seemed to be working.)
I had also been using iMovie, exporting movies, all day. I had also been heavily using iPhoto and Firefox, moving photos out and onto Facebook. The case was hot to the touch and iStatpro said that the power supply was around 159 degrees F and the CPU was around 135 degrees F. Is it possible I triggered some sort of safety cutoff?
Please help me out here. I love this computer but the random shutdowns are totally killing it. Thanks in advance.Hello All,
Here's my experience with unexpected shutdowns...
My 20" Intel iMac is 6 months old - August 08.
- After shutting it down one evening as per normal, it just wouldn't turn on the next morning. Nothing I did worked: different power socket, changed the fuse (UK plug) etc. When I had just about given up carrying it around the house, it suddenly came back to life. Went to the shop to buy milk, got back and off it was again. Weird. So I spoke to Apple Care who suggested I take it down to the Apple Store in central London, UK. I laboriously did so (try taking the underground with an iMac... not fun) and dropped it off mid afternoon.
- Got a call the same evening from Apple Store: my iMac turned on fine first time (typical), tests were being run on it (basically stress testing the processor with multiple processes), and it was fine. No fault was found, I could go and pick it up.
- So I take it back home the next day, again battling with London commuters with my heavy, bulky iMac box and plug it in. All fine. Work all day on it as per normal (nothing intensive). Then at about 10pm, it just turns off. No warning, nothing. Just off, and this time its staying off. I let it cool down, nothing. Diffent plugs, nothing. Change the plug fuse, nothing. Next morning, nothing. Its dead.
- So I head off directly to the Apple Store again, iMac in hand, and battle it out again with London commuters on the underground. I explain the situation, am promised this will be a priority repair...
- Eventually, after 10 days (Christmas got in the way), I get a call that it is ready. Two items of hardware were changed, namely 1) power supply and 2) Cable/DC Power/SATA/Inverter. Though none of them were actually faulty, they are the items that can cause sudden shutdowns...
- I pick it up, and it seems fine since. But upon switching it on, I noticed the whole bottom half of my dispay was dim. Bright at the top, grey at the bottom... Another chat with Apple Care (by then am on first name terms with the whole team), we do various hardware resets to no avail. Am advised to drop it off at Apple. So off I go to the Apple Store again.
And I just got it back again.. with a new LCD display...
(http://discussions.apple.com/thread.jspa?threadID=1730239&tstart=0)
So the cost of all repairs to my 6 months old iMac is now more than half of the overall cost of the machine. Still, credit to Apple for not quibbling on any of the above issues, and fixing them (relatively) quickly and efficiently.
Now lets hope my iMac stays on and stays bright... -
Do the newer macbooks also suffer random shutdowns?
Hi there, I'm considering buying a Mac, and I'm stumped for choice. I'm choosing between an iMac 17 inch to replace my PC, or a Macbook for portability. If I am going to be buying a Macbook, I want to know if Apple tested them for random shutdowns first, just so I know that I won't be buying a machine that I'll have to send out within the first week of recieving it. If the new macbooks (as in the ones with Core 2 Duo processors) still suffer random shutdowns I'll probably go for an iMac instead.
You're claim that everyone who owns 1 (22 out of 25 people) has a problem is total hogwash. Geez, why would you say such a thing? I recently sold my Core Duo BlackBook, one of the first 500 off the assembly line), and never once had a problem with it - ever! I really didn't want to sell it because it was such a fine workhorse but I wanted 801.n on my home network and needed a C2D to get that. I carried it around on all my hospital rounds and it contained every one of my patient's health records. If MacBooks were as you claimed then Jobs must of personally touched my BlackBook with the luck of the Gods!
Before it was even sold I bought another C2D BlackBook, loaded it with 3Gig of RAM (yes, you CAN upgrade to 3Gig) and the thing is a most excellent machine. Faster, sleeker, and works like a champ. I transferred all my patient's records within 20 minutes.
My advice: don't believe the naysayers. Especially here. These forums were established to assist MacBook users with all issues, including problems. But the number of problems is miniscule and those you read here come from less than 1% of the MacBook owners.
The Core Duo BlackBook sold for just $200 less then what I paid for it and it was fully loaded with everything I could put on it when I originally purchased it. I used it a full year (May to May) and figured the $200 was a year's worth of cheap rental.
BTW, I got a better BlackBook for less money this time around. Faster CPU, larger hard drive, more RAM and a superior laptop to those of my colleagues - what more could a geek physician ask for?
Tim...
Maybe you are looking for
-
Clob datatype- very slow while appending
Hi, please help on below pl/sql block. I have written below code, but the response time is very slow. the table - aux_comm_3_to_1 has more than 1 Lakh records. and I have append all the record and send the record as clob OUT parameter to GUI. Pls sug
-
Download iTunes Version 10.6.8 (old version)
I just bought a new iPhone 5S and I need iTunes 10.6.8 or newer to set up my phone like my old iPhone. I currently have iTunes 10.6.3, and when I try and upgrade iTunes from the app itself it says that I have the most current version (but I obviously
-
Passing field info from PR to PO and to the Delivery note
Hi! I'm adding custom fields in Purchase requistion , purchase Order and delivery Note. This custom field information has to be passed from requisition to the purchase Order and also to the delivery Note. I need Help in doing this. tha
-
CFCHART asks for username and password
I have a page with cfchart on it that is throwing up a server "Authentication required" username and password box. Taking out the cfchart tag stops it from happening and the rest of the page loads fine. It is an ajax get request to the page, but navi
-
hi, i need to know if there is any adapter available to call a HTTP service or any other alternative to call a HTTP web service. Please reply as soon as possible. Thanks Kiran