Rating: saveURL not works?

here:
http://www.sanremowebtv.it/rating.cfm
why my rating widget not fireoff the xhr call after voting ?
var rate = new Spry.Widget.Rating("spryrating1", {
saveURL:'video/vota-bc.cfm?id=spryrating1&val=@@rw_Rating@@'
thanks
Rob

Hey Rob, i just had the same problem. Try using saveUrl
instead of saveURL. change the caps on 'r' and 'l'. it worked for
me.

Similar Messages

Rating Column not working

I have enabled rating setting for one discussion board in one of my site collection. Now when i hover over the rating stars rating stars don't turn yellow. I have checked central admin and made sure User Profile service and the two timer jobs associated
with working of rating are working as expected. Still i am facing this issue. This issue is confined to only one site collection and rating works perfectly for other site collection. Can any one guide me on what might have gone wrong.

http://sharepoint.stackexchange.com/a/51650/7904
Try this ^
Basically, the user profile service permissions has a 'Use Social Features' checkbox, in my case it was unticked.
Also check below:
http://social.msdn.microsoft.com/Forums/office/en-US/8b3dccba-1621-47d6-be2d-a47feb74b83f/how-do-i-display-sharepoint-ratings-rating-05-on-a-page?forum=sharepointdevelopmentlegacy
If this helped you resolve your issue, please mark it Answered

Imix rating still not working

Win XP, itunes 7.0.1, brand new dell c521 with latest drivers, obviously clean install. Italian itunes store.
Same issue as with previous pc: imix rating screwed up.
If I rate an imix 5 stars, it turns out to be 1.
Anything from 4 stars to 1 gives a 0 stars and lowers the average voting of the target imix.
The problem has been out since 7.0.0, back in september.
Could anybody from Apple just give a sign of life and confirm that this is a well known problem and that it will be fixed in the next release?
many thanks
Dell C521 Windows XP brand new, clean install, latest EVERYTHING

Same problem here, outlined in this thread:
http://discussions.apple.com/thread.jspa?messageID=3980407&#3980407
It seems to only affect some users (otherwise new iMixes would never get a rating above zero) and also seems to be cross platform, and apparently international (I use the US Store)... Definitely a bug in the system.
Dear Apple Support -- could someone work on this please? I feel sad for the people who put thought and hard work into their iMixes, only to get shot down.
Win XP, itunes 7.0.1, brand new dell c521 with latest
drivers, obviously clean install. Italian itunes
store.
Same issue as with previous pc: imix rating screwed
up.
If I rate an imix 5 stars, it turns out to be 1.
Anything from 4 stars to 1 gives a 0 stars and lowers
the average voting of the target imix.
The problem has been out since 7.0.0, back in
september.
Could anybody from Apple just give a sign of life and
confirm that this is a well known problem and that it
will be fixed in the next release?
many thanks
Dell C521
Windows XP brand new, clean install, latest
EVERYTHING
G5 2GHz Dual Processor Mac OS X (10.4.8)

Star rating function not working

I have Adobe Bridge CS6 on Windows. Some of my images in Bridge don't allow me to give a star rating and some do. What is the difference? I would like to use the star rating function an all of my images. What should I do?

Starwalk direction change works fine on my iPad using the latest Apple iOS level 5.0.1 and the latest Starwalk level 5.4.
The Google search only finds a problem dating from May 2010 which has long since been corrected.

The rating system is not working. I'm using LR 5.4 on a Mac with OS 10.8.5. Any suggestions please?

The rating system is not working. I'm using LR 5.4 on a Mac with OS 10.8.5. Any suggestions please?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

Gui_download Function module is not working in Background Scheduling

Hi Experts,
Function modules like GUI_DOWNLOAD are not working in background scheduled jobs, It is raising an exception. Though it is working fine in foreground execution.
Please provide me solution for this challenging task.
you could be rated well for this question.
Thanks,
Rama Krishna.

Hello,
work with open dataset and close dataset...
just loop over itab and transfer itab field for field into a string field separated by ;
Here is an extract of coding:
OPEN DATASET p_dath FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP AT itab_pos.
    CLEAR satz.
    MOVE itab_pos-vbeln TO satz-vbeln.
    MOVE ';' TO satz-fill1.
    MOVE itab_pos-kunnr TO satz-kunnr.
    MOVE ';' TO satz-fill2.
    MOVE itab_pos-ktgrd TO satz-ktgrd.
    MOVE ';' TO satz-fill3.
    MOVE itab_pos-fkdat TO satz-fkdat.
    MOVE ';' TO satz-fill4.
    MOVE itab_pos-budat TO satz-budat.
    MOVE ';' TO satz-fill5.
    MOVE itab_pos-cpudt TO satz-cpudt.
    MOVE ';' TO satz-fill6.
    MOVE itab_pos-fkimg TO satz-fkimg.
    MOVE ';' TO satz-fill7.
    MOVE itab_pos-netwr TO satz-netwr.
    MOVE ';' TO satz-fill8.
    MOVE itab_pos-vrkme TO satz-vrkme.
    MOVE ';' TO satz-fill9.
    MOVE itab_pos-ktgrm TO satz-ktgrm.
    MOVE ';' TO satz-fill10.
    MOVE itab_pos-matnr TO satz-matnr.
    MOVE ';' TO satz-fill11.
    MOVE itab_pos-mattxt TO satz-mattxt.
    MOVE ';' TO satz-fill12.
    MOVE itab_pos-gewei TO satz-gewei.
    MOVE ';' TO satz-fill13.
    MOVE itab_pos-brgew TO satz-brgew.
    TRANSFER satz TO p_dath.
ENDLOOP.
CLOSE DATASET p_dath.
It is not so comfortable as it is with GUI_DOWNLOAD but it works in background!

Link for BUT000 table and ADRC in CRM and inner join is not working in PCUI

Hi Gurus,
   Please tell me the link btween BUT000 and ADRC table. and i wrote one inner join between BUT000 and BUT0id table but it not working. I m in CRM 4.0 version working with PCUI.
select but000partner but000name_org1 but000name_org2 but000bus_sort1 but0id~parnter1
      but0ididnumber from but000 inner join but0id on but0idpartner = but000~parnter
into corresponding fields of table it_result where partner in s_partner.
It is giving error as partner unknown from but000 table. I delcared everything and tried with alias names also.
please clarify me.
regards,
Ramakrishna.

Hi Frederic,
   thanks a lot. But is inner join between BUT000 and BUT0ID will work. for me it is not working. plesae see this code.
tables : but000,
         but0id,
         crmm_but_custno,
         adrc.
types : begin of typ_but000,
        partner type bu_partner,
        name_org1 type BU_NAMEOR1,
        name_org2 type BU_NAMEOR2,
        bu_sort1 type BU_SORT1,
        idnumber type BU_ID_NUMBER,
        partner1 type bu_partner,
        end of typ_but000.
data: lt_but000 type table of typ_but000,
      ls_but000 like line of lt_but000.
*select-options : s_partnr for but000-partner.
start-of-selection.
      select but000partner but000name_org1 but000name_org2 but000bu_sort1 but0id~parnter1
                but0id~idnumber into corresponding fields of table lt_but000 from but000
                inner join but0id on but0idpartner = but000parnter. " where partner in s_partner.
it is giving error as but000-partner is not know or but0id-partner not known.
So, i think if it not works then i should write two select stmts.
please clarify me.
i gave u rating.
thanks
ramakrishna.

APPLE TV YOUTUBE IS NOT WORKING MANY POST BUT NO SUPPORT FROM APPLE STAFF

In this forum and in many forums I have read posts regarding YouTube is not working.
In my situation I have updated to the latest version of apple tv (2.3). My Leopard is up to date / itunes also.
I am sharing internet connection in imac using Airport. Eveything works but YouTube does not work.
I can log in with my YouTube username (this shows it can successfully connects and gets reponse from the server), BUT I can not view featured/most viewed etc. I only see spinning apple thing.
I have been useing apple tv for 3 days and firts date YouTube worked. Also yesterday I did restart atv with menu + - for 6 seconds and relogged in to itunes and youtube worked again. I watched the whole night. I did also made some testing like rebooting atv again / turning of internet sharing and so on, magically it was working. I did get a good night sleep and in the morning when I tried again boom YouTube was broken again.
My only request from apple tv tech guys to admit there is a problem with YouTube in Apple TV so we can stop trying to make it work.

Well I kind of never give up and still trying.
Today I figured out something, I was looged in to You Tube Account from apple tv. I clicked on History (on Youtube/History) and I could view the movies. When I click on one it start stream and downloads it. So there is no connection issue due to my hardware router etc. The only places I get the spinning wheel is when I try to use Youtube/Feature/Most Viewed/Top Rated/Search
There is definitively connection to the server but why I can't navigate the above links mentioned.
I would really appreciate any suggestions it does not matter if you know a fix or not but each feedback would help me solve this issue.

Bridge on Mac deleting/rejecting/filtering not working!?! HELP

Ok seems as if I am having a problem only windows users have run into in earlier versions of CS. I was using CS5 on my PC and for many reasons I had to dump the dead weight of the PC world and move to a Mac... FINALLY! But that also ment purchasing a new CS5 for Mac. I thought this would be flawless... CS5 to CS5. WRONG. I store my photos on a 2TB external, same one i used on my PC. Now, I can not do any sort of "editing" of image info like "delete, "reject", "star" or anyother rating within bridge. It does not work with key commandes or from the menu. After researching this issue for two days it seems as if this issuse has been reserved for PC users and earlier versions being upgraded to newer ones. This is not the case for me. They said to "use as Administrator" I am the adminsitrator, and have made sure the permisissions have been set to read and write. That has not made a difference. Others have said that there seems to be no solution. Things they have tried include:
~Uninstall/reinstall of CS
~administrator settings
~setting it to open automatically at start up
~deleting pictures and reloading them through the new software version (this also seems to be an issue reserved for photos that have already been uploaded, I do not know if this will change with new images loaded through the new version as I have not had a chance to try it, since I'm trying to resolve this first)
I need to have access to my previously loaded files and this is a huge hiccup!
PS I can open the files to Photoshop, and edit, and the changes seem to stick, its just any organization, deleting, staring etc actually in bridge DONT stick. another issue that the PC users seem to have is error messages and pop-up windows when tring to exicute these tasks. I have no error messages.
PLEASE HELP! thx

I am read only on both of my externals! when i tried to find a way to set permissions, it says that I should be able to find a "lock" once I have gone to "get info" there is no "lock" so that I may enter my password and change permissions.
First thing that comes to my mind is that you have used the same external disks as you did for Windows. And that you did not reformatted them for a Mac using MacOS Extended (Journaled) formatting.
Without knowing your situation I assume you have a back up disk with the same content as your problem disk. If not it might be wise to buy a new back Up disk. There is one thing sure about disks, they all have an end date, some sooner most later but they all die and often at a moment you did not expect it nor could use it...
Make sure you have a proper back up and the reformat the disk (or the new disk) using Mac Disk Utillity
Personally I always use the safety option to overwrite the disk once with Zeros but that takes a bit longer.
Give it a proper name and use the default format as mentioned above. Copy the content back to the new formatted disk and try again
If in doubt try another older disk or buy a cheap one for testing if this method is working for you.

E1200 - Ports not working and mac filtering problem

If there was a way to give negative stars to this router, I would. As it is, the minimum rating I can give this product is one star, and that's one star too many.
I was upgrading from the WRT54G, which is an ugly thing to look at, but a reliable workhorse nonetheless. I turned that in to a downstream switch in my comms hub.
On the E1200, I flashed the latest firmware, used different Cat5 cables, and different laptops before committing to hating this product.
The first time I reached out to Amazon, the Amazon rep gave me a Cisco number to call. Turns out, that's some shady mortgage refinance hotline. Try it for yourself! 1-800-666-1771.
Now, the rant -
1. Two out of four wired LAN ports don't work: What can be the fix for this?! The activity lights on ports 3 and 4 blink and suggest data transfer is taking place, but the wired laptop simply can't acquire an IP address and access the internet. Same result when I connect my Panasonic Blu-Ray player to ports 3 and 4. None of the Viera Cast features load.
2. MAC filtering unreliable: The wireless routing works somewhat reliably, if and only if, one settles for the most basic security. If I only choose a password and WPA2 protocol, things work fine. If I add another layer of security (in my case, enabling MAC filtering and only PERMITTING gateway to listed MAC IDs), things break down. As soon as I disable MAC filtering, wireless access to authenticated clients is restored.
3. Cisco customer service: The censored world we live in, compels me to criticize politely. TERRIBLE. Cisco website is unintuitive, and frustrating. There's no easy way to register your purchased product. The Cisco "registration" is intentionally misleading and deceptive. For all intents and purposes, it's just an information gathering tool for Cisco. Don't bother registering there, unless you love the idea of storing your personal information on their servers. Their phone-based customer service is apathetic and uninterested. My rep was so distrusting of my intelligence and motor control, that he simply wouldn't believe that I had selected "PERMIT" and not "PREVENT" as the option under MAC filtering. After he asked me the same question for the fourth time, I raised my voice, and he gave up the idea of checking for the fifth time.
However, this review is a tale of two companies. I reached out to Amazon again. This time, I got a rockstar in the shape of Leanne C! She was incredibly helpful, and understanding. What's more, she set up my return without any hassle and this Cisco dud is on its way back. I'm a big fan of Leanne's and my confidence in Amazon is restored.
I'm sure that i received a lemon. I've never had problems with Linksys products. Maybe others' experience is different from mine.

In your case as port numbers 1 and 2 does not work, what you could have done a loop back test. To perform a loop back test you need to take an ethernet cable, connect one end of that cable to internet port and the other end to the non-working port on the router. If you get the led to glow on both internet and the respective ethernet port that indicates that the port is working fine.
It could also be a sychronization issue between the above mentioned lan ports and the lan card of your computer. As a part of trouble shooting you can try to reduce the card speed of your lan card. Following are the steps to reduce the speed of your lan card.
START--> right-click My Network Places and click Properties
right-click on the device manager and click properties
Click on the CONFIGURE button
Select the ADVANCED tab and in the box under the header property select "speed and duplex" and change the value on the right to 10 mbps half duplex. A restart would be recommended after performing these steps.
In the second half you said that after enabling the mac filter option the internet breaks down. Here, do you mean to say that the computer
gets disconnected from the wireless network or it stays connected with a valid IP address but without an internet connection.
Well, it is an unusual issue however you could have reset and reconfigure the router as you got the latest firmware upgraded on it.
Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.

Dreamweaver rollovers not working in Safari

Hi,
I have been using Dreamweaver's image rollover effects for
years now with no issues. Well, until now. I'm working on a fairly
simple site for a filmmaker. It only includes 3 small rollover
effects.
I've tested the site on my PC using IE, Firefox, and Safari
3.0.4, and it looks fine. The rollovers do not work for the client
in Safari though. She is using Safari version 2.0.4. Her system is
Mac OS X, version 10.4.8, 1.33 GHz powerPC G4.
I'm stumped. I'm using Dreamweaver CS3. Here's a link to one
of the pages with the issue:
http://www.leadtooth.com/pythagoras/filmwork.html
Any help would be incredible appreciated. Thanks in advance.
Matt

You have munged your code. Change this -
<script language="JavaScript" type="text/javascript">
<meta name="coverage" content="Worldwide">
<meta name="country" content="Canada">
<meta name="revisit_after" content="14 days">
<meta name="robots" content="index, follow">
<meta name="distribution" content="global">
<meta name="rating" content="General">
<!--
function MM_reloadPage
to this -
<meta name="coverage" content="Worldwide">
<meta name="country" content="Canada">
<meta name="revisit_after" content="14 days">
<meta name="robots" content="index, follow">
<meta name="distribution" content="global">
<meta name="rating" content="General">
<script language="JavaScript" type="text/javascript">
<!--
function MM_reloadPage

Music not working on iPhone after iOS 5 upgrade

Hi all,
Apparently I spoke too soon- To review, ever since I upgraded to iOS 5, the iPod functionality of my iPhone (ie all of my music) doesn't function. It worked for the first day or so, then when I tried to start the app, it would present with a blank white screen for about 10 seconds, then just quit. I've restarted, reset, and restored, and the only thing that helped was restoring (I've restored about 4 times now). It would then work for about a day, then not work again. I eventually got tired of restoring, and just 'unsynced' my music, then resynced again. That would again work for about a day, then I'd have to repeat that process. Now, not even resyncing my music works.
Otherwise the phone seems to be working well- no other app issues or usage issues. I'd occasionally get an error (-34) or (-50) while syncing, but I'd just 'eject' the phone, and reattach and it would sync.
I'm using iCloud for backup, and I'm syncing wirelessly, unless I restore or unsync my music, at which time I'll hook it directly to the computer.
Any suggestions?
John

Sorry, but no suggestions....I have the same problem I think... my music app just goes to a white screen then back to the home page. if i search for a song it will find it, but when i try to play it, i get a black scrren, then just back to home page. the app has worked a lot, but this has happened a few times prior and has resolved itself (not sure how), but now i can't get my music to work at all. video, everything else works...this is on iphone4s with ios 5.0.1. there's a definite bug here and hopefully enough people will complain about it to get apple to fix it! I get the feeling it has something to do with a large music library (I have 46GB) and large/complex playlists. I also seem to have a syncing problem in that music rating changes made on iphone don't get syncd back to by windows pc library. I noticed this just before the music app stopped working completely. Apple.. please help!

KM4M-L Video not working (1337 needs help)

KM4M-L
2500XP
2-512Mb Corsair 3200 XMS
ONBOARD VIDEO OUT NOT WORKING.
AGP VIDEO OUT NOT WORKING.
Brand new MB and components.
Computer is POSTing ... I think (I can hear the beep and the keyboard lights up.)
I have tried all configurations and know all other components to be FINE. (i.e. monitor, PSU, and RAM are WORKING)
I have reset the CMOS jumper. I have RTFM.
Problem exists between user and solution. Is it my MB and has anyone else had this problem? I think this is a defective MB. This is my last ditch effort before I RMA it.
Thanks!

thanks for the suggestions, gents. (even though one was insulting)
I mean.. the CPU comment I can understand a mistake but, the RAM comment?! We all know that RAM will run at a lower speed than its rating in accordance with the MB.
I already have an Nforce2 system. This system is SFF. The link you provided is ATX.
PSU is Antec Smart Power 350W. This PSU works in other systems.
Yeah, I had both power plugs connected. (4pin and ATX)
I am going to replace the CPU with a 266Mhz FSB and see is that helps.

Report Concern not Working, Can not remove Wrong Review Posted

I'm the writer of a specific review - (1 Star Rating as the product did not work at all)
And published this review by accident in the WRONG place for another product by clicking on the WRONG item on the Apple original invoice.
When Signed in using my Itunes account - this review does not show up in my account, so I can not remove it.
I've contacted the company for who the wrong review was placed and they can not remove it either.
Clicking on Report a Concern, does not help either, as nothing happens when I click to submit the report to Apple.
I've done the following: and nothing worked.
1. Signed in with my own Apple ID to report the concern.
2. Signed in with a different Apple ID to report the concern.
3. Used a Windows PC & Itunes.
4. Used a Mac & Itunes.
I really would like this wrong review to be removed, and could also not find an email address to report this issue directly to Itunes/Apple either.
Thank you for any assistance with this.
RDAU

Hello Vijay ,
I have grant permissions to the user and the report in BI webcatalog and also in BIP under admin tab I have addes the role which the user belongs to and also the shared folder . Still the problem exists.
My BI presentation servcies security is working . My user security is also working , all that I need is the user should be able to see the report when he clicks on BIP link placed in dashboard.

ITunes Ratings Not Working

I'm hoping that someone can help me troubleshoot and fix this issue.
It appears that my iTunes ratings aren't working. I first noticed the issue when I went to create a smart playlist based upon my My Rating. Where the stars should display I have a black bar...? My ratings have worked fine for the past 3 years. I can still change a songs rating by right clicking on the song and selecting the rating. If I select the My Top Rated playlist, which was already setup, it works fine. I've already tried reistalling/repairing; I've uninstalled and reinstalled.
Thoughts?

I'd love to know the answer to this one, several people have had it. It appears to be related the functioning of directX in some way.
A quick thing to check is right click in your desktop:
Properties>Settings>Advanced>Troubleshoot.
Hardware acceleration needs to be set to full, if the setting is too low, the stars don't work. However most people are on full already.
You can try updating DirectX:
http://www.microsoft.com/windows/directx/default.mspx
And Drivers:
http://docs.info.apple.com/article.html?artnum=300252
And lastly completely removing Quicktime (not iTunes) using the following Method:
http://docs.info.apple.com/article.html?artnum=93698
Then install the stand alone version of Quicktime:
http://www.apple.com/quicktime/download/win.html
I fear these will not work, but please let me know if you find a solution.

Rating: saveURL not works?

Similar Messages

Maybe you are looking for