Raw material succeeded in marking while failed in release
Hey, guys,
After last period closing, we found some raw materials succeeded in marking while failed in release.
We maintained a new planned price for next period, and after we finished ck40n, the planned price had appeared in the future, meaning it had been marked successfully.
However, after we finished CKME, we found it failed in releasing planned price. The last period's price still remained in the current period.
What are the possible reasons?
Thanks
Jim
cheers.
thank all.
It is only about 100 raw material has this problem.Other raw materials succeeded in both marking and releasing.
I have checked all possible reasons you guys said, but none of them applies.
Unfortunately, the system log has been deleted by our basis administrator.
Is there any other possible reasons ?
regards.
Jim
Similar Messages
-
I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?
Try installing it manually from:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Regards,
Ashutosh -
Freight cost to be included in the Raw material cost while creating VL31N
Hi all,
We are purchasing raw material from other country. we are paying freight for the imported material.
My requirement is, when doing inbound delivery freight cost has to be included in the raw material cost.
Now its not getting included in the raw material cost.
What are all the necessary steps to be done to include the freight cost into the raw material?
Thanks in advance,
BabuHi,
You can create dummy material inmaterial master record.
You can enter the material manually while creating inbound delivery, which will come as unplanned delivery cost.
Br,
Tushar Patankar -
Check in migo while gr raw material should equal with the challan materials
hi friends,
while doing gr in migo there should be a check for the raw material's which we are giving should match with challan materials. Here challan no is entered at the excise invoice tab- subcontracting challan level.
points will be rewarded,
thanks in advance ,
prasad.Thanks for your kind reply,
But is there a way solve this problem?
And what is the use of leaving a field in the account assignment tab for an internal order while creating a PO and it will not take advantage of the settlement rule????????
And as you know the internal order settlement is a way to create a multiple account assignment
Can we solve the problem by making an automatic fake transaction that reverse the value of the GR/IR and creating another transaction can apply on it the settlement rule??
You know that settlement rule process is one of the best features in the SAP system it save time and effort to make distributions manually -
Optimization of raw material while issuing from the stores
Dear Techies,
I need a small information regarding,Optimization of raw materials of "arc shape "while issuing from the stores it self.
I will explain this with an example.
Say we require a flange ring.This flange ring can be manufactured using three -120 deg segments.
while calling the raw material below the flange rings material ,we have to give raw material dimensions of " 1X120 deg segment".System will accordingly multiply for the requirement of 3-segments.
In this situation is there any possibilty to " Club" the raw material to minimize the scrap,ie., we can accomdate another segment just below the other segment.With this type of arrangement I can optimize raw material required.
Is there any possibility in SAP that I can address this situation.
Thanks In advance,
With best regards,
Kiran.Hello,
according to my knowlege it is not possible in SAP.
you have to create interface with Softwares like PRO-E sheet metal.
Regards
AM -
Hi All,
We procured some raw material against account assignment "Q"which has been lying in our stores for a month.
Now we want to dispose off this material to some trader/vendor.
How to go about it? shall we make sales order for this?
Regards,
SatyendraThis is a complicated procedure in sap and there are some problems. Techincally sap allows you to sell only finished goods. IN the latest ecc6.0 patches it allows you to sell raw materials also.
Otherwise you need to change the settings for Material type in Logistics general to get the views that you want to maintain.
Now coming back to reality it depends on whether you are registered as a trader /dealer or you are a manufacturer. If you are not registered as a trader then there is a procedure in excise called As is sales. There is no value addition here and while you can add a mark-up slightly you have to pass on the duties to your buyer what you have taken credit on your vendor side.
If however you have dealer regn too then you can clear it as a regular sale maintain the rg23D for the material as well. The onus is on you to prove what went into manufacture and what traded.
In the case of as is sale there is a sap note on this. please see.
regds
Jude -
Raw material cost report for production of finished produt.?(urgent..REWARD
Hi,
any one can help in this issue.
i am not getting the raw materila cost & manfacture conversion cost for for the bom of FG - SFG - SFG - SFG- RAW
FG - finished goods,
SFG - semi finished goods
RAW - raw material.
plz provide the solution.
raw material and manfacture conversion cost is calculated in PERFORM z_process_data. subroutine.
REPORT z_co_production_cost_nsk.
TABLES: afko, bkpf, t001w , caufv.
TYPE-POOLS: kkblo,
slis.
DATA: d_datefrom LIKE sy-datum,
d_dateto LIKE sy-datum,
d_repid LIKE sy-repid,
d_uname LIKE sy-uname,
d_returncode TYPE i,
d_tabix TYPE i,
d_kokrs LIKE tka01-kokrs,
d_waers LIKE tka01-waers,
wa_fieldcatalog TYPE slis_fieldcat_main,
wa_listevents TYPE slis_alv_event,
wa_listlayout TYPE slis_layout_alv,
wa_print_info TYPE slis_print_alv,
wa_listheader TYPE slis_listheader,
d_headerlines TYPE i.
DATA: BEGIN OF t_caufv OCCURS 0,
aufnr TYPE caufv-aufnr,
werks TYPE caufv-werks,
objnr TYPE covp-objnr,
gamng TYPE caufv-gamng,
plnbez TYPE caufv-plnbez,
rsnum TYPE caufv-rsnum,
END OF t_caufv.
*Added by Anand Bothra on 24/11/2003
DATA: t_ab_caufv LIKE t_caufv OCCURS 0 WITH HEADER LINE.
DATA: t_temp_caufv LIKE t_caufv OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_afpo OCCURS 0,
aufnr TYPE afpo-aufnr,
posnr TYPE afpo-posnr,
wemng TYPE afpo-wemng,
amein TYPE afpo-amein,
charg TYPE afpo-charg,
END OF t_afpo.
DATA: BEGIN OF t_afpo1 OCCURS 0,
aufnr TYPE afpo-aufnr,
refaufnr TYPE afpo-aufnr,
objnr TYPE caufv-objnr,
rsnum TYPE afko-rsnum,
wemng TYPE afpo-wemng,
werks TYPE afpo-dwerk,
charg TYPE afpo-charg,
END OF t_afpo1.
DATA: BEGIN OF t_makt OCCURS 0,
matnr TYPE makt-matnr,
maktx TYPE makt-maktx,
END OF t_makt.
DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv,
t_listevents TYPE slis_t_event,
t_sortsequence TYPE slis_t_sortinfo_alv,
t_listheader TYPE slis_t_listheader.
DATA: BEGIN OF t_production_costs OCCURS 0,
objnr TYPE covp-objnr, " Object Number
kstar TYPE covp-kstar, " Cost Element
wkgbtr TYPE covp-wkgbtr, " Cost of Line Item in CO area curr
mbgbtr TYPE covp-mbgbtr, " Quantity of Line Item
matnr TYPE covp-matnr, " Material Number
kokrs TYPE covp-kokrs, " Controlling Area
belnr TYPE covp-belnr, " Cost Accounting Document
buzei TYPE covp-buzei, " Item Number in Document
END OF t_production_costs.
DATA: BEGIN OF t_production_costs1 OCCURS 0,
objnr TYPE covp-objnr, " Object Number
kstar TYPE covp-kstar, " Cost Element
wkgbtr TYPE covp-wkgbtr, " Cost of Line Item in CO area curr
mbgbtr TYPE covp-mbgbtr, " Quantity of Line Item
kokrs TYPE covp-kokrs, " Controlling Area
belnr TYPE covp-belnr, " Cost Accounting Document
buzei TYPE covp-buzei, " Item Number in Document
END OF t_production_costs1.
DATA t_production_costs2 LIKE t_production_costs1
OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_suborders OCCURS 0,
aufnr TYPE caufv-aufnr,
prevaufnr TYPE caufv-aufnr,
objnr TYPE covp-objnr,
rsnum TYPE caufv-rsnum,
END OF t_suborders.
DATA: BEGIN OF t_outputtab OCCURS 0,
plnbez LIKE afko-plnbez, " Material Number
objnr LIKE caufv-objnr, " Object Number
maktx LIKE makt-maktx, " Material Description
charg LIKE afpo-charg, " Batch Number
aufnr LIKE afko-aufnr, " Production Order Number
gamng LIKE caufv-gamng, " Total Order Quantity
wemng LIKE afpo-wemng, " Goods Receipt Quantity
amein LIKE afpo-amein, " Unit of Measure
yield TYPE p DECIMALS 2, " Percentage Yield
totalrmcost TYPE p DECIMALS 2, " Total Raw Material Cost
totalpmcost TYPE p DECIMALS 2, " Total Packing Mat. Cost
mfgconvcost TYPE p DECIMALS 2, " Manu. Conversion Cost
pkgconvcost TYPE p DECIMALS 2, " Packing Conv. Cost
rmperunit TYPE p DECIMALS 2, " Raw Cost per unit
pmperunit TYPE p DECIMALS 2, " Pack Mat cost per unit
ccperunit TYPE p DECIMALS 2, " Conv Cost per unit
totperunit TYPE p DECIMALS 2, " Total Cost per unit
waers LIKE tka01-waers, " Currency Key for CO Area
END OF t_outputtab.
*Added by Anand Bothra on 24/11/2003.
DATA: t_ab_outputtab LIKE t_outputtab OCCURS 0 WITH HEADER LINE,
t_temp_outputtab LIKE t_outputtab OCCURS 0 WITH HEADER LINE.
BEGIN OF INSERTION VIP110703
DATA:wa_prev_outputtab LIKE LINE OF t_outputtab,
wa_production_costs LIKE LINE OF t_production_costs.
DATA:prev_totmatqty TYPE p DECIMALS 2,
prev_tot_mfgconv_cst TYPE p DECIMALS 2,
grand_mat_qty TYPE p DECIMALS 2 ,
tmp_aufnr TYPE caufv-aufnr.
DATA: BEGIN OF t_suborders_propcost OCCURS 0,
aufnr TYPE caufv-aufnr,
prevaufnr TYPE caufv-aufnr,
objnr TYPE covp-objnr,
rsnum TYPE caufv-rsnum,
proprmcost TYPE p DECIMALS 2,
prop_mfg_convcost TYPE p DECIMALS 2,
END OF t_suborders_propcost.
DATA: wa_suborders LIKE LINE OF t_suborders.
END OF INSERTION VIP110703
BEGIN OF INSERTION VIP111003
DATA: prev_aufnr TYPE caufv-aufnr,
prev_matnr TYPE mara-matnr,
curr_matnr TYPE mara-matnr.
DATA: bln_suborder ,
ratio TYPE p DECIMALS 5.
BEGIN OF INSERTION VIP111003
*Added by Anand Bothra on 28/11/2003
DATA: d_flag TYPE c.
SELECTION-SCREEN BEGIN OF BLOCK zblock1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_plnbez FOR afko-plnbez,
s_aufnr FOR afko-aufnr,
"Added By Vivek on 29.11.2005
s_auart FOR caufv-auart obligatory.
PARAMETERS p_werks LIKE t001w-werks OBLIGATORY.
SELECTION-SCREEN END OF BLOCK zblock1.
SELECTION-SCREEN BEGIN OF BLOCK zblock2 WITH FRAME TITLE text-002.
SELECT-OPTIONS: s_monat FOR bkpf-monat NO-EXTENSION OBLIGATORY.
PARAMETERS p_gjahr LIKE bkpf-gjahr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK zblock2.
SELECTION-SCREEN BEGIN OF BLOCK zblock3 WITH FRAME TITLE text-022.
PARAMETERS: p_detsum RADIOBUTTON GROUP rad,
p_sum RADIOBUTTON GROUP rad.
SELECTION-SCREEN END OF BLOCK zblock3.
INITIALIZATION.
d_repid = sy-repid.
d_uname = sy-uname.
p_werks = 'G001'.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name EQ 'P_WERKS'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
AT SELECTION-SCREEN ON s_monat.
IF s_monat-high IS INITIAL.
IF NOT ( s_monat-low BETWEEN 1 AND 12 ).
MESSAGE e398(00) WITH text-023 text-024 space space.
ENDIF.
ELSE.
IF ( ( s_monat-low LT 1 ) OR ( s_monat-high GT 12 ) ).
MESSAGE e398(00) WITH text-023 text-024 text-025 space.
ENDIF.
ENDIF.
START-OF-SELECTION.
PERFORM z_get_period_dates.
PERFORM z_select_prod_orders.
PERFORM z_select_prod_costs.
PERFORM z_select_addl_prod_costs.
PERFORM z_select_mat_desc.
END-OF-SELECTION.
IF d_returncode EQ 0.
PERFORM z_process_data.
*Added by Anand Bothra on 24/11/2004.
PERFORM z_select_to_print.
PERFORM z_prepare_fieldcat.
PERFORM z_get_alv_events.
PERFORM z_define_sortsequence.
PERFORM z_define_layout.
PERFORM z_display_list.
*Added by Anand Botra on 25/11/2003.
PERFORM z_export_to_excel.
PERFORM z_send_mail_and_download.
ELSE.
MESSAGE i017(p5).
ENDIF.
*& Form Z_GET_PERIOD_DATES
text
--> p1 text
<-- p2 text
FORM z_get_period_dates.
Determine the date range from the fiscal period range and
fiscal year entered on the selection screen
DATA: d_firstdate LIKE sy-datum,
d_lastdate LIKE sy-datum,
t_dates LIKE scscp_period_str OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'FIRST_AND_LAST_DAY_IN_YEAR_GET'
EXPORTING
i_gjahr = p_gjahr
i_periv = 'V3'
IMPORTING
e_first_day = d_firstdate
e_last_day = d_lastdate
EXCEPTIONS
input_false = 1
t009_notfound = 2
t009b_notfound = 3
OTHERS = 4.
CALL FUNCTION 'CSCP_PARA1_GET_PERIODS'
EXPORTING
i_datuv = d_firstdate
i_datub = d_lastdate
i_timeunit = 'M'
TABLES
et_dates = t_dates.
SORT t_dates BY sindex.
DELETE t_dates INDEX 1.
LOOP AT t_dates.
SUBTRACT: 1 FROM t_dates-sindex,
1 FROM t_dates-datub.
MODIFY t_dates TRANSPORTING sindex datub.
ENDLOOP.
CLEAR: d_datefrom,
t_dates.
READ TABLE t_dates WITH KEY sindex = s_monat-low.
d_datefrom = t_dates-datuv.
CLEAR d_dateto.
IF s_monat-high IS INITIAL.
d_dateto = t_dates-datub.
ELSE.
CLEAR t_dates.
READ TABLE t_dates WITH KEY sindex = s_monat-high.
d_dateto = t_dates-datub.
ENDIF.
ENDFORM. " Z_GET_PERIOD_DATES
*& Form Z_SELECT_PROD_ORDERS
text
--> p1 text
<-- p2 text
FORM z_select_prod_orders.
Select all production orders as per the selection criteria provided
DATA: d_dlv_code LIKE jstat-stat,
d_teco_code LIKE jstat-stat,
t_status LIKE jstat OCCURS 0 WITH HEADER LINE.
SELECT SINGLE name1 INTO t001w-name1 FROM t001w WHERE werks = p_werks.
if s_plnbez-low eq space and s_plnbez-high eq space.
endif.
SELECT aufnr werks objnr gamng rsnum plnbez
INTO CORRESPONDING FIELDS OF
TABLE t_caufv FROM caufv
WHERE aufnr IN s_aufnr
AND auart IN ('PP01', 'LL02') : BY VIVEK
AND auart in s_auart " Added By Vivek on 29.11.2005
AND werks = p_werks
AND plnbez IN s_plnbez
AND getri BETWEEN d_datefrom AND d_dateto
ORDER BY aufnr.
d_returncode = sy-subrc.
IF d_returncode NE 0.
STOP.
ENDIF.
Filter out only those production orders that have a status
DLV (Delivered) or TECO (Technically Confirmed).
CLEAR: d_dlv_code,
d_teco_code.
PERFORM z_get_status_code USING 'DLV' CHANGING d_dlv_code.
PERFORM z_get_status_code USING 'TECO' CHANGING d_teco_code.
LOOP AT t_caufv.
REFRESH t_status.
CALL FUNCTION 'STATUS_READ'
EXPORTING
CLIENT = SY-MANDT
objnr = t_caufv-objnr
only_active = 'X'
IMPORTING
OBTYP =
STSMA =
STONR =
TABLES
status = t_status
EXCEPTIONS
object_not_found = 1
OTHERS = 2
IF sy-subrc EQ 0.
CLEAR t_status.
READ TABLE t_status WITH KEY stat = d_dlv_code.
IF sy-subrc NE 0.
CLEAR t_status.
READ TABLE t_status WITH KEY stat = d_teco_code.
IF sy-subrc NE 0.
DELETE t_caufv.
ENDIF.
ENDIF.
ELSE.
DELETE t_caufv.
ENDIF.
ENDLOOP.
IF t_caufv[] IS INITIAL.
d_returncode = 4.
STOP.
ENDIF.
Added by Anand Bothra on 24/11/2003**********
t_ab_caufv[] = t_caufv[].
Added by Anand Bothra on 28/11/2003.
IF ( s_plnbez-low EQ space AND s_plnbez-high EQ space ).
IF ( s_aufnr-low EQ space AND s_aufnr-high EQ space ).
d_flag = 'N'.
ELSE.
d_flag = 'Y'.
ENDIF.
ELSE.
d_flag = 'Y'.
ENDIF.
IF d_flag = 'Y'.
Added by Anand Bothra on 21/11/2003.**********
*Get the batch number of the entered order
DATA: itab_afpo LIKE afpo OCCURS 100 WITH HEADER LINE.
DATA: BEGIN OF t_ab_charg OCCURS 0,
*Added by Anand on 27/11/2003
aufnr LIKE afpo-aufnr,
charg LIKE afpo-charg,
END OF t_ab_charg.
LOOP AT t_caufv.
SELECT aufnr charg FROM afpo INTO t_ab_charg WHERE aufnr =
t_caufv-aufnr.
APPEND t_ab_charg.
CLEAR t_ab_charg.
ENDSELECT.
ENDLOOP.
IF sy-subrc = 0.
SELECT * FROM afpo INTO TABLE itab_afpo WHERE charg = d_ab_charg.
ENDIF.
LOOP AT t_ab_charg.
SELECT * FROM afpo INTO itab_afpo WHERE charg = t_ab_charg-charg.
APPEND itab_afpo.
CLEAR itab_afpo.
ENDSELECT.
ENDLOOP.
CLEAR t_caufv.
REFRESH t_caufv.
*Get all the orders with the same batch number.
LOOP AT itab_afpo.
SELECT aufnr werks objnr gamng rsnum plnbez
INTO CORRESPONDING FIELDS OF
t_caufv FROM caufv WHERE aufnr = itab_afpo-aufnr.
APPEND t_caufv.
ENDSELECT.
ENDLOOP.
CLEAR t_caufv.
SORT t_caufv BY aufnr.
delete adjacent duplicates from t_caufv comparing all fields.
ENDIF.
SELECT aufnr posnr wemng amein charg INTO TABLE t_afpo
FROM afpo FOR ALL ENTRIES IN t_caufv
WHERE aufnr = t_caufv-aufnr.
d_returncode = sy-subrc.
IF d_returncode NE 0.
STOP.
ENDIF.
SORT t_afpo BY aufnr.
ENDFORM. " Z_SELECT_PROD_ORDERS
*& Form Z_SELECT_MAT_DESC
text
--> p1 text
<-- p2 text
FORM z_select_mat_desc.
Get the Description of all materials
SELECT matnr maktx INTO TABLE t_makt FROM makt
FOR ALL ENTRIES IN t_caufv
WHERE matnr = t_caufv-plnbez
AND spras = sy-langu.
ENDFORM. " Z_SELECT_MAT_DESC
*& Form Z_PROCESS_DATA
text
--> p1 text
<-- p2 text
FORM z_process_data.
Process the data from all production orders and prepare the output
table for display appropriately
DATA: d_mbgbtr TYPE p DECIMALS 3,
loop_cnt TYPE i.
REFRESH t_outputtab.
LOOP AT t_caufv.
CLEAR t_outputtab.
MOVE-CORRESPONDING t_caufv TO t_outputtab.
CLEAR t_makt.
READ TABLE t_makt WITH KEY matnr = t_caufv-plnbez.
IF sy-subrc EQ 0.
MOVE t_makt-maktx TO t_outputtab-maktx.
ENDIF.
CLEAR t_afpo.
READ TABLE t_afpo WITH KEY aufnr = t_caufv-aufnr.
IF sy-subrc EQ 0.
MOVE: t_afpo-wemng TO t_outputtab-wemng,
t_afpo-amein TO t_outputtab-amein,
t_afpo-charg TO t_outputtab-charg.
ENDIF.
IF t_outputtab-gamng NE 0.
COMPUTE t_outputtab-yield =
( t_outputtab-wemng / t_outputtab-gamng ) * 100.
ENDIF.
APPEND t_outputtab.
ENDLOOP.
SORT t_production_costs BY objnr kstar.
LOOP AT t_production_costs.
AT NEW objnr.
CLEAR: d_mbgbtr, d_tabix, t_outputtab.
READ TABLE t_outputtab WITH KEY objnr = t_production_costs-objnr.
MOVE sy-tabix TO d_tabix.
" Add up the Raw Material and Manufacturing Conversion
" Costs from the previous stage production order
CLEAR loop_cnt .
LOOP AT t_suborders WHERE aufnr = t_outputtab-aufnr.
commented by anand bothra on 20/11/2003
ADD 1 TO loop_cnt.
IF loop_cnt > 1.
EXIT.
ENDIF.
LOOP AT t_production_costs1 WHERE objnr = t_suborders-objnr.
CASE t_production_costs1-kstar.
WHEN '0005000000' OR '0005010000'. " Raw Material Cost
BEGIN OF deletion VIP110703
ADD t_production_costs1-wkgbtr TO t_outputtab-totalrmcost.
END OF deletion VIP110703
ADD t_production_costs1-wkgbtr TO prev_totmatqty.
WHEN '0000500100'. " Manufacturing Conversion Cost
ADD t_production_costs1-wkgbtr TO prev_tot_mfgconv_cst.
BEGIN OF deletion VIP110703
ADD t_production_costs1-wkgbtr TO t_outputtab-mfgconvcost.
END OF deletion VIP110703
ENDCASE.
ENDLOOP.
BEGIN OF INSERTION VIP110703
READ TABLE t_production_costs INTO wa_production_costs
WITH KEY objnr = t_production_costs-objnr
matnr = wa_prev_outputtab-plnbez.
IF sy-subrc = 0.
IF ( wa_production_costs-mbgbtr NE
wa_prev_outputtab-wemng ) .
prev_totmatqty = ( prev_totmatqty /
wa_prev_outputtab-wemng ) *
wa_production_costs-mbgbtr.
prev_tot_mfgconv_cst = ( prev_tot_mfgconv_cst /
wa_prev_outputtab-wemng ) *
wa_production_costs-mbgbtr.
ENDIF.
ENDIF.
LOOP AT t_suborders_propcost
WHERE prevaufnr = wa_prev_outputtab-aufnr.
t_suborders_propcost-proprmcost = prev_totmatqty.
t_suborders_propcost-prop_mfg_convcost = prev_tot_mfgconv_cst
MODIFY t_suborders_propcost.
ENDLOOP.
clear: prev_totmatqty,
prev_tot_mfgconv_cst.
END OF INSERTION VIP110703
BEGIN OF INSERTION VIP111003
CLEAR: wa_prev_outputtab,
wa_production_costs.
READ TABLE t_outputtab INTO wa_prev_outputtab
WITH KEY aufnr = t_suborders-prevaufnr.
ratio = 1.
IF sy-subrc = 0.
READ TABLE t_production_costs INTO wa_production_costs
WITH KEY objnr = t_outputtab-objnr
matnr = wa_prev_outputtab-plnbez.
IF sy-subrc = 0.
IF ( wa_production_costs-mbgbtr NE
wa_prev_outputtab-wemng ) .
ratio = wa_production_costs-mbgbtr /
wa_prev_outputtab-wemng.
prev_totmatqty = ( prev_totmatqty /
wa_prev_outputtab-wemng ) *
wa_production_costs-mbgbtr.
prev_tot_mfgconv_cst = ( prev_tot_mfgconv_cst /
wa_prev_outputtab-wemng ) *
wa_production_costs-mbgbtr.
ENDIF.
ENDIF.
ENDIF.
LOOP AT t_suborders_propcost
WHERE prevaufnr = wa_prev_outputtab-aufnr
AND aufnr = t_outputtab-aufnr.
t_suborders_propcost-proprmcost = prev_totmatqty.
t_suborders_propcost-prop_mfg_convcost = prev_tot_mfgconv_cst.
MODIFY t_suborders_propcost.
ENDLOOP.
*Commented by Anand Bothra on 20/11/2003.
CLEAR: prev_totmatqty,
prev_tot_mfgconv_cst.
BEGIN OF INSERTION VIP111003
ENDLOOP.
ENDAT.
AT END OF kstar.
SUM.
CASE t_production_costs-kstar.
WHEN '0000500200'. " Packing Conversion Costs
t_outputtab-pkgconvcost = t_production_costs-wkgbtr.
WHEN '0005000500'. " Semi-Finished Cost/Quantity
MOVE t_production_costs-mbgbtr TO d_mbgbtr.
WHEN '0005050000' OR '0005050001' OR '0005050002'.
" Packing Mat Costs
ADD t_production_costs-wkgbtr TO t_outputtab-totalpmcost.
WHEN '0005000000' OR '0005010000'.
ADD t_production_costs-wkgbtr TO t_outputtab-totalrmcost.
WHEN '0000500100'. " Manufacturing Conversion Cost
ADD t_production_costs-wkgbtr TO t_outputtab-mfgconvcost.
ENDCASE.
ENDAT.
AT END OF objnr.
MOVE d_waers TO t_outputtab-waers.
Calculations for the Production Order
" Determine the RM Cost/Unit and Mfg Conv Cost/Unit
CLEAR t_afpo1.
READ TABLE t_afpo1 WITH KEY aufnr = t_outputtab-aufnr.
IF ( ( sy-subrc EQ 0 ) AND ( t_afpo1-wemng NE 0 ) ).
BEGIN OF insertion VIP110703
tmp_aufnr = t_production_costs-objnr+2(12).
LOOP AT t_suborders_propcost
WHERE aufnr = tmp_aufnr .
ADD t_suborders_propcost-proprmcost TO t_outputtab-totalrmcost
ADD t_suborders_propcost-prop_mfg_convcost TO
t_outputtab-mfgconvcost.
ENDLOOP.
END OF insertion VIP110703
BEGIN OF insertion VIP111003
CLEAR: t_suborders_propcost , tmp_aufnr.
READ TABLE t_suborders_propcost
WITH KEY aufnr = t_outputtab-aufnr.
IF sy-subrc = 0.
t_suborders_propcost-proprmcost =
t_suborders_propcost-proprmcost * ratio.
ADD t_suborders_propcost-proprmcost
TO t_outputtab-totalrmcost.
t_suborders_propcost-prop_mfg_convcost =
t_suborders_propcost-prop_mfg_convcost * ratio.
ADD t_suborders_propcost-prop_mfg_convcost
TO t_outputtab-mfgconvcost.
tmp_aufnr = t_suborders_propcost-prevaufnr.
bln_suborder = 'T'.
WHILE bln_suborder = 'T'.
CLEAR: t_suborders_propcost .
READ TABLE t_suborders_propcost
WITH KEY aufnr = tmp_aufnr.
IF sy-subrc = 0.
t_suborders_propcost-proprmcost =
t_suborders_propcost-proprmcost * ratio.
ADD t_suborders_propcost-proprmcost
TO t_outputtab-totalrmcost.
t_suborders_propcost-prop_mfg_convcost =
t_suborders_propcost-prop_mfg_convcost * ratio.
ADD t_suborders_propcost-prop_mfg_convcost
TO t_outputtab-mfgconvcost.
tmp_aufnr = t_suborders_propcost-prevaufnr.
ELSE.
bln_suborder = 'F'.
CLEAR tmp_aufnr.
ENDIF.
ENDWHILE.
ENDIF.
END OF insertion VIP111003
END OF deletion VIP110703
t_outputtab-mfgconvcost = ( t_outputtab-mfgconvcost /
t_afpo1-wemng ) * d_mbgbtr.
t_outputtab-totalrmcost = ( t_outputtab-totalrmcost /
t_afpo1-wemng ) * d_mbgbtr.
END OF deletion VIP110703
ENDIF.
IF t_outputtab-wemng NE 0.
t_outputtab-rmperunit = t_outputtab-totalrmcost /
t_outputtab-wemng.
" PM Cost Per Unit = Total PM Cost / Quantity Delivered
t_outputtab-pmperunit = t_outputtab-totalpmcost
/ t_outputtab-wemng.
" Conv Cost Cost Per Unit = (Manu Conv Cost + Pack Conv Cost)
" / Qty Delv
t_outputtab-ccperunit = ( t_outputtab-mfgconvcost
+ t_outputtab-pkgconvcost )
/ t_outputtab-wemng.
ENDIF.
" Total Cost Per Unit = (RM Cost per unit + PM Cost per Unit
" + Conv Cost per unit)
t_outputtab-totperunit = t_outputtab-rmperunit
+ t_outputtab-pmperunit
+ t_outputtab-ccperunit.
Update the calculated values in the internal table
CHECK d_tabix GT 0.
MODIFY t_outputtab INDEX d_tabix
TRANSPORTING totalrmcost totalpmcost
mfgconvcost pkgconvcost
rmperunit pmperunit
ccperunit totperunit waers.
BEGIN OF DELETION VIP110703
MOVE t_outputtab TO wa_prev_outputtab.
END OF DELETION VIP110703
ENDAT.
ENDLOOP.
ENDFORM. " Z_PROCESS_DATA
*& Form Z_DISPLAY_LIST
text
--> p1 text
<-- p2 text
FORM z_display_list.
Display the Report
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
i_callback_program = d_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME =
is_layout = wa_listlayout
it_fieldcat = t_fieldcatalog
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = t_sortsequence
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = ' '
it_events = t_listevents
IT_EVENT_EXIT =
is_print = wa_print_info
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = t_outputtab
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SET PF-STATUS 'Z_AB_STANDARD'.
ENDFORM. " Z_DISPLAY_LIST
*& Form Z_FILL_FIELDCATALOG
text
--> p1 text
<-- p2 text
FORM z_fill_fieldcatalog USING p_rownum LIKE sy-curow
p_colnum LIKE sy-cucol
p_fieldname TYPE slis_fieldname
p_tabname TYPE slis_tabname
p_reffield TYPE dd03p-fieldname
p_reftable TYPE dd03p-tabname
p_qfield TYPE slis_fieldname
p_qtab TYPE slis_tabname
p_sum
p_stext
p_mtext
p_ltext
p_datatype
p_outputlen.
Prepare the fields for ALV list output
CLEAR wa_fieldcatalog.
wa_fieldcatalog-row_pos = p_rownum.
wa_fieldcatalog-col_pos = p_colnum.
wa_fieldcatalog-fieldname = p_fieldname.
wa_fieldcatalog-tabname = p_tabname.
wa_fieldcatalog-ref_fieldname = p_reffield.
wa_fieldcatalog-ref_tabname = p_reftable.
wa_fieldcatalog-qfieldname = p_qfield.
wa_fieldcatalog-qtabname = p_qtab.
wa_fieldcatalog-do_sum = p_sum.
wa_fieldcatalog-seltext_s = p_stext.
wa_fieldcatalog-seltext_m = p_mtext.
wa_fieldcatalog-seltext_l = p_ltext.
wa_fieldcatalog-datatype = p_datatype.
wa_fieldcatalog-outputlen = p_outputlen.
APPEND wa_fieldcatalog TO t_fieldcatalog.
ENDFORM. " Z_FILL_FIELDCATALOG
*& Form Z_PREPARE_FIELDCAT
text
--> p1 text
<-- p2 text
FORM z_prepare_fieldcat.
Append all the display fields into the field catalog internal table
First Row
PERFORM z_fill_fieldcatalog USING 1 1 'PLNBEZ' 'T_OUTPUTTAB'
space 'AFKO' space space
space space space space space
0.
PERFORM z_fill_fieldcatalog USING 1 2 'MAKTX' 'T_OUTPUTTAB'
space 'MAKT' space space
space space space space space
0.
PERFORM z_fill_fieldcatalog USING 1 3 'CHARG' 'T_OUTPUTTAB'
space 'AFPO' space space
space space space space space
0.
Second Row
PERFORM z_fill_fieldcatalog USING 2 1 'AUFNR' 'T_OUTPUTTAB'
space 'AFKO' space space
space space space space space
0.
PERFORM z_fill_fieldcatalog USING 2 2 'GAMNG' 'T_OUTPUTTAB'
space 'CAUFV' 'AMEIN' space
'X' space space space space
0.
PERFORM z_fill_fieldcatalog USING 2 3 'WEMNG' 'T_OUTPUTTAB'
space 'AFPO' 'AMEIN' space
'X' space space space space
0.
PERFORM z_fill_fieldcatalog USING 2 4 'AMEIN' 'T_OUTPUTTAB'
space 'AFPO' space space
space space space space space
0.
PERFORM z_fill_fieldcatalog USING 2 5 'YIELD' 'T_OUTPUTTAB'
space space space space
space text-010 text-010 text-010
'QUAN' 17.
Third Row
PERFORM z_fill_fieldcatalog USING 3 1 'TOTALRMCOST' 'T_OUTPUTTAB'
space space space space
'X' text-011 text-011 text-011
'CURR' 21.
PERFORM z_fill_fieldcatalog USING 3 2 'TOTALPMCOST' 'T_OUTPUTTAB'
space space space space
'X' text-012 text-012 text-012
'CURR' 21.
PERFORM z_fill_fieldcatalog USING 3 3 'MFGCONVCOST' 'T_OUTPUTTAB'
space space space space
'X' text-013 text-013 text-013
'CURR' 21.
PERFORM z_fill_fieldcatalog USING 3 4 'PKGCONVCOST' 'T_OUTPUTTAB'
space space space space
'X' text-014 text-014 text-014
'CURR' 21.
Fourth Row
PERFORM z_fill_fieldcatalog USING 4 1 'RMPERUNIT' 'T_OUTPUTTAB'
space space space space
space text-015 text-015 text-015
'CURR' 21.
PERFORM z_fill_fieldcatalog USING 4 2 'PMPERUNIT' 'T_OUTPUTTAB'
space space space space
space text-016 text-016 text-016
'CURR' 21.
PERFORM z_fill_fieldcatalog USING 4 3 'CCPERUNIT' 'T_OUTPUTTAB'
space space space space
space text-017 text-017 text-017
'CURR' 21.
PERFORM z_fill_fieldcatalog USING 4 4 'TOTPERUNIT' 'T_OUTPUTTAB'
space space space space
space text-018 text-018 text-018
'CURR' 21.
ENDFORM. " Z_PREPARE_FIELDCAT
*& Form Z_GET_ALV_EVENTS
text
--> p1 text
<-- p2 text
FORM z_get_alv_events.
Returns table of possible events for a list type
REFRESH t_listevents.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
et_events = t_listevents
EXCEPTIONS
list_type_wrong = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
CLEAR: wa_listevents, d_tabix.
READ TABLE t_listevents WITH KEY name = slis_ev_top_of_page
INTO wa_listevents.
d_tabix = sy-tabix.Hi Sai,
You can try using MB51, use filter movement type 261. Add a filter for the posting date coverage.
Then proceed. Click on the icon DETAIL LIST.
Then click on the SUBTOTAL, add MATERIAL as a Criteria. The click the column AMOUNT IN LC.
You should see the total issuances to per material.
I hope this helps.
Heinrick Palad -
Report on Actual Price of Raw Material
Dear Experts,
There is any report on which I can see Actual Purchase Price of Raw material.
Thanks in Advance
regards...KaushalDear Kaushal,
If so do you want the price that's maintained in the Purchase Info Record?
If required the price mentioned in PIR can be overwritten while purchase order is created.
If you want to take the values mentioned in Purchase Info record means,check these tables,
EINA Purchasing Info Record: General Data
EINE Purchasing Info Record: Purchasing Organization
EKKO Purchasing Document Header
EKPO Purchasing Document Item
Regards
Mangalraj.S -
Party Merge ORA-29861: domain index is marked LOADING/FAILED/UNUSABLE
Hi gurus,
i am using 11.5.10.2 on linux.
while running the party merge concurrent program , we are getting below error, please help.
Errors in Merge :
Application: Receivables_
Error: Merge failed in Receivables (HZ_STAGED_PARTY_SITES ) with the following error message:
This unexpected SQL error occurred during the merge process :
ORA-29861: domain index is marked LOADING/FAILED/UNUSABLE
The following record was being handled when the error occurred :
Thanks
RBThanks Hussain, this is similer to the error i got, i will run the steps and get back to you, once again thanks for your prompt responce.
Thx
RB
Edited by: R12DBA on Jul 23, 2010 4:36 PM
Edited by: R12DBA on Jul 23, 2010 4:50 PM -
Control file creation failed while installing ---------R12 release 3
While installing R12 release 3 I am getting following error at the time of Step 2 0f 5
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
following is summery of my server hardware
HDD capacity 146GB X 10 nos. ( RAID5 with 2 arrays)
8 GB RAM
Operating System is Red hat Linux Enterprise 4 with Update 5
Following are the HDD partition details
Boot 1GB
Root 50GB
Tem 12GB
SWAP 24GB distributed on two HDD partitions equally
Database and Application HDD portion size 500GB
I am refering Metalink note Note 402310.1 all the setting are correct
Following is kernel settings
kernel.sem = 256 32000 100 142
kernel.shmall = 2097152
kernel.shmmax = 4294967296 ( Half the size of the physical memory is 8GB )
kernel.shmmni = 4096
kernel.msgmax = 8192
kernel.msgmnb = 65536
kernel.msgmni = 2878
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144
All the Pre-req.of installation are passing correctly
• glibc-2.3.4-2.25
• glibc-common-2.3.4-2.25
• binutils-2.15.92.0.2-21
• compat-libstdc++-296-2.96-132.7.2
• gcc-3.4.6-3
• gcc-c++-3.4.6-3
• libgcc-3.4.6-3
• libstdc++-3.4.6-3
• libstdc++-devel-3.4.6-3
• openmotif21-2.1.30-11.RHEL4.6**
• pdksh-5.2.14-30.3
• setarch-1.6-1
• make-3.80-6.EL4
• gnome-libs-1.4.1.2.90-44.1
• sysstat-5.0.5-11.rhel4
• compat-db-4.1.25-9
• control-center-2.8.0-12.rhel4.5
• xscreensaver-4.18-5.rhel4.11
• libaio-0.3.105-2
• libaio-devel-0.3.105-2
these all packeges are avalable on the server some are even are the higher version because OS is with update 5
Doen the installation 3 time with formating , but still facing same problem
All Groups and Users and permitions are correct
runProcess_3
Statusstring Configuring Database
Executing command: /stage/startCD/Disk1/rapidwiz/jre/Linux/1.5.0//bin/java -DCONTEXT_VALIDATED=true -mx512M -classpath /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar oracle.apps.ad.clone.ApplyDatabase -e /test/db/tech_st/10.2.0/appsutil/VIS_test.xml -stage /stage/startCD/Disk1/rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at /test/db/tech_st/10.2.0/appsutil/log/VIS_test/ApplyDatabase_08271904.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.Running Database Install Driver for VIS instance
Succesfully changed Permissions for /test/db/tech_st/10.2.0/appsutil/log/VIS_test
Processing DriverFile = /stage/startCD/Disk1/rapidwiz/template/adridb.drv
Running Instantiation Drivers for /stage/startCD/Disk1/rapidwiz/template/adridb.drv
instantiate file:
source : /stage/startCD/Disk1/rapidwiz/template/adrun10g.sh
dest : /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh
backup : /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh to /test/db/tech_st/10.2.0/appsutil/out/VIS_test/templbac/adrun10g.sh
setting permissions: 755
setting ownership: oracle:dba
instantiate file:
source : /stage/startCD/Disk1/rapidwiz/template/adrundb.sh
dest : /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh
backup : /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh to /test/db/tech_st/10.2.0/appsutil/out/VIS_test/templbac/adrundb.sh
setting permissions: 755
setting ownership: oracle:dba
Step 0 of 5
Command: /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh
Step 1 of 5: Doing UNIX preprocessing
Processing Step 1 of 5
Step 1 of 5
Command: /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh
Step 2 of 5: Doing UNIX preprocessing
Processing Step 2 of 5
Executing: su oracle -c "/test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh"
STARTED INSTALL PHASE : DATABASE : Mon Aug 27 19:06:52 IST 2007
Preparing environment to install databases ...
Setting LD_LIBRARY_PATH to - /stage/startCD/Disk1/rapidwiz/lib/Linux -
Setting PATH to - /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
Setting CLASSPATH to - /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
... installing VISION demo database
FINISHED INSTALL PHASE : DATABASE : Mon Aug 27 19:06:53 IST 2007
su oracle -c "/test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh" has succeeded
Succesfully changed Permissions for /test/db/tech_st/10.2.0/temp
===============================================================================
NetServiceHandler 120.13 started for test at Mon Aug 27 19:06:54 IST 2007
===============================================================================
[ Context Information ]
Host : test
Domain : apps.com
Out Dir : null
Tier Type : DATABASE TIER
Getting connection...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : test
sDbDomain : apps.com
sDbPort : 1531
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@test.apps.com:1531:VIS
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.apps.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
java.lang.NoSuchFieldError: TDU
Please refer to the remaining logs on applications node at - /test/inst/apps/VIS_test/logs/08271731.log
Can Some one pls reply
Thanks and Regards,
AmolpromptUserForDiskPath Oracle Applications Rapid Install - RDBMS & Disk number = 1
Path Obtained by Instantiate File: /prod/stage/oraDB/Disk1 & Disk number = 1
Processing /prod/stage/oraDB/Disk1/dbts/driver/db102.drv file
================================================================
Processing the contents of : Disk1
Processing the driver file : /prod/stage/oraDB/Disk1/dbts/driver/Disk1.drv
UNZIPPING THE DISK1 CONTENTS
UNZIP used: UnZip 5.51 of 22 May 2004, by Info-ZIP. Maintained by C. Spieler. Send
Unzip0 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db58_opmn.zip at /test/db/tech_st/10.2.0/
Unzip0
.end std out.
.end err out.
Unzip0 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db58_opmn.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip1 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db74_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip1
.end std out.
.end err out.
Unzip1 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db74_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip2 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db26_javavm.zip at /test/db/tech_st/10.2.0/
Unzip2
.end std out.
.end err out.
Unzip2 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db26_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip5 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db23_javavm.zip at /test/db/tech_st/10.2.0/
Unzip5
.end std out.
.end err out.
Unzip5 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db23_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip6 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db29_javavm.zip at /test/db/tech_st/10.2.0/
Unzip6
.end std out.
.end err out.
Unzip6 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db29_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip3 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db22_javavm.zip at /test/db/tech_st/10.2.0/
Unzip3
.end std out.
.end err out.
Unzip3 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db22_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip4 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db9_bin.zip at /test/db/tech_st/10.2.0/
Unzip4
.end std out.
.end err out.
Unzip4 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db9_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip8 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db24_javavm.zip at /test/db/tech_st/10.2.0/
Unzip8
.end std out.
.end err out.
Unzip8 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db24_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip9 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db27_javavm.zip at /test/db/tech_st/10.2.0/
Unzip9
.end std out.
.end err out.
Unzip9 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db27_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip7 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db25_javavm.zip at /test/db/tech_st/10.2.0/
Unzip7
.end std out.
.end err out.
Unzip7 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db25_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip12 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db73_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip12
.end std out.
.end err out.
Unzip12 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db73_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip13 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db11_bin.zip at /test/db/tech_st/10.2.0/
Unzip13
.end std out.
.end err out.
Unzip13 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db11_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip14 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db37_lib.zip at /test/db/tech_st/10.2.0/
Unzip14
.end std out.
.end err out.
Unzip14 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db37_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip10 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db20_demo.zip at /test/db/tech_st/10.2.0/
Unzip10
.end std out.
.end err out.
Unzip10 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db20_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip17 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db62_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip17
.end std out.
.end err out.
Unzip17 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db62_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip15 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db54_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip15
.end std out.
.end err out.
Unzip15 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db54_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip16 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db42_lib.zip at /test/db/tech_st/10.2.0/
Unzip16
.end std out.
.end err out.
Unzip16 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db42_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip11 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db19_demo.zip at /test/db/tech_st/10.2.0/
Unzip11
.end std out.
.end err out.
Unzip11 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db19_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip20 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db8_bin.zip at /test/db/tech_st/10.2.0/
Unzip20
.end std out.
.end err out.
Unzip20 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db8_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip19 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db1_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip19
.end std out.
.end err out.
Unzip19 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db1_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip21 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db33_jdk.zip at /test/db/tech_st/10.2.0/
Unzip21
.end std out.
.end err out.
Unzip21 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db33_jdk.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip18 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db40_lib.zip at /test/db/tech_st/10.2.0/
Unzip18
.end std out.
.end err out.
Unzip18 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db40_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip22 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db72_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip22
.end std out.
.end err out.
Unzip22 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db72_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip23 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db35_jlib.zip at /test/db/tech_st/10.2.0/
Unzip23
.end std out.
.end err out.
Unzip23 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db35_jlib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip25 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db53_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip25
.end std out.
.end err out.
Unzip25 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db53_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip26 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db13_ctx.zip at /test/db/tech_st/10.2.0/
Unzip26
.end std out.
.end err out.
Unzip26 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db13_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip27 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db57_wf.zip at /test/db/tech_st/10.2.0/
Unzip27
.end std out.
.end err out.
Unzip27 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db57_wf.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip24 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db0_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip24
.end std out.
.end err out.
Unzip24 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db0_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip29 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db36_jre.zip at /test/db/tech_st/10.2.0/
Unzip29
.end std out.
.end err out.
Unzip29 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db36_jre.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip31 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db14_ctx.zip at /test/db/tech_st/10.2.0/
Unzip31
.end std out.
.end err out.
Unzip31 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db14_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip33 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db70_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip33
.end std out.
.end err out.
Unzip33 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db70_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip28 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db2_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip28
.end std out.
.end err out.
Unzip28 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db2_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip32 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db68_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip32
.end std out.
.end err out.
Unzip32 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db68_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip30 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db52_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip30
.end std out.
.end err out.
Unzip30 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db52_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip34 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db64_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip34
.end std out.
.end err out.
Unzip34 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db64_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip37 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db76_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip37
.end std out.
.end err out.
Unzip37 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db76_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip36 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db90_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip36
.end std out.
.end err out.
Unzip36 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db90_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip35 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db44_md.zip at /test/db/tech_st/10.2.0/
Unzip35
.end std out.
.end err out.
Unzip35 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db44_md.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip40 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db80_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip40
.end std out.
.end err out.
Unzip40 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db80_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip41 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db21_javavm.zip at /test/db/tech_st/10.2.0/
Unzip41
.end std out.
.end err out.
Unzip41 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db21_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip42 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db30_javavm.zip at /test/db/tech_st/10.2.0/
Unzip43 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db49_nls.zip at /test/db/tech_st/10.2.0/
Unzip38 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db31_inventory.zip at /test/db/tech_st/10.2.0/
Unzip38
.end std out.
.end err out.
Unzip38 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db31_inventory.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip39 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db3_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip39
.end std out.
.end err out.
Unzip39 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db3_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip44 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db28_javavm.zip at /test/db/tech_st/10.2.0/
Unzip42
.end std out.
.end err out.
Unzip42 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db30_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
Processing disk file : disk.label in /prod/stage/oraDB/Disk2
Checking the content :disk.label
All contents are valid.....
=============================================================
Processing the contents of : Disk2
Processing the driver file : /prod/stage/oraDB/Disk2/dbts/driver/Disk2.drv
UNZIPPING THE DISK2 CONTENTS
Unzip45 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db60_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip45
.end std out.
.end err out.
Unzip45 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db60_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip46 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db59_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip46
.end std out.
.end err out.
Unzip46 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db59_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip47 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db61_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip47
.end std out.
.end err out.
Unzip47 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db61_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip50 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db63_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip50
.end std out.
.end err out.
Unzip50 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db63_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip48 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db39_lib.zip at /test/db/tech_st/10.2.0/
Unzip48
.end std out.
.end err out.
Unzip48 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db39_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip49 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db65_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip49
.end std out.
.end err out.
Unzip49 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db65_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip51 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db89_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip51
.end std out.
.end err out.
Unzip51 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db89_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip52 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db77_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip52
.end std out.
.end err out.
Unzip52 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db77_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip57 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db69_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip57
.end std out.
.end err out.
Unzip57 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db69_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip55 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db81_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip55
.end std out.
.end err out.
Unzip55 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db81_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip53 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db75_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip53
.end std out.
.end err out.
Unzip53 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db75_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip56 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db83_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip56
.end std out.
.end err out.
Unzip56 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db83_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip58 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db71_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip58
.end std out.
.end err out.
Unzip58 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db71_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip54 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db79_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip54
.end std out.
.end err out.
Unzip54 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db79_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip61 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db67_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip61
.end std out.
.end err out.
Unzip61 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db67_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip60 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db87_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip60
.end std out.
.end err out.
Unzip60 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db87_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip62 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db48_network.zip at /test/db/tech_st/10.2.0/
Unzip62
.end std out.
.end err out.
Unzip62 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db48_network.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip63 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db50_oui.zip at /test/db/tech_st/10.2.0/
Unzip63
.end std out.
.end err out.
Unzip63 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db50_oui.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip59 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db85_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip59
.end std out.
.end err out.
Unzip59 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db85_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip65 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db4_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip64 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db32_jdk.zip at /test/db/tech_st/10.2.0/
Unzip66 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db7_bin.zip at /test/db/tech_st/10.2.0/
Unzip67 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db10_bin.zip at /test/db/tech_st/10.2.0/
Unzip68 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db16_ctx.zip at /test/db/tech_st/10.2.0/
Unzip68
.end std out.
.end err out.
Unzip68 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db16_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip66
.end std out.
.end err out.
Unzip66 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db7_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip65
.end std out.
.end err out.
Unzip65 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db4_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
Processing disk file : disk.label in /prod/stage/oraDB/Disk3
Checking the content :disk.label
All contents are valid.....
=============================================================
Processing the contents of : Disk3
Processing the driver file : /prod/stage/oraDB/Disk3/dbts/driver/Disk3.drv
UNZIPPING THE DISK3 CONTENTS
Unzip71 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db84_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip71
.end std out.
.end err out.
Unzip71 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db84_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip73 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db66_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip73
.end std out.
.end err out.
Unzip73 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db66_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip69 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db55_sysman.zip at /test/db/tech_st/10.2.0/
Unzip69
.end std out.
.end err out.
Unzip69 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db55_sysman.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip72 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db47_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip72
.end std out.
.end err out.
Unzip72 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db47_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip70 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db56_sysman.zip at /test/db/tech_st/10.2.0/
Unzip70
.end std out.
.end err out.
Unzip70 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db56_sysman.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip78 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db86_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip78
.end std out.
.end err out.
Unzip78 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db86_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip74 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db45_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip74
.end std out.
.end err out.
Unzip74 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db45_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip76 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db34_jdk.zip at /test/db/tech_st/10.2.0/
Unzip76
.end std out.
.end err out.
Unzip76 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db34_jdk.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip79 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db78_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip79
.end std out.
.end err out.
Unzip79 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db78_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip81 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db6_assistants.zip at /test/db/tech_st/10.2.0/
Unzip81
.end std out.
.end err out.
Unzip81 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db6_assistants.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip82 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db18_demo.zip at /test/db/tech_st/10.2.0/
Unzip82
.end std out.
.end err out.
Unzip82 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db18_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip83 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db51_perl.zip at /test/db/tech_st/10.2.0/
Unzip83
.end std out.
.end err out.
Unzip83 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db51_perl.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip84 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db41_lib.zip at /test/db/tech_st/10.2.0/
Unzip84
.end std out.
.end err out.
Unzip84 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db41_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip85 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db12_bin.zip at /test/db/tech_st/10.2.0/
Unzip85
.end std out.
.end err out.
Unzip85 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db12_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip86 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db15_ctx.zip at /test/db/tech_st/10.2.0/
Unzip86
.end std out.
.end err out.
Unzip86 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db15_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip87 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db38_lib.zip at /test/db/tech_st/10.2.0/
Unzip87
.end std out.
.end err out.
Unzip87 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db38_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip80 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db88_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip80
.end std out.
.end err out.
Unzip80 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db88_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip77 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db46_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip77
.end std out.
.end err out.
Unzip77 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db46_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip75 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db17_demo.zip at /test/db/tech_st/10.2.0/
Unzip75
.end std out.
.end err out.
Unzip75 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db17_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip89 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db43_lib.zip at /test/db/tech_st/10.2.0/
Unzip88 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db82_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip90 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db5_assistants.zip at /test/db/tech_st/10.2.0/
Unzip89
.end std out.
.end err out.
Unzip89 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db43_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip88
.end std out.
.end err out.
Unzip88 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db82_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
AutoConfig is exiting with status 0
AutoConfig is exiting with status 0
Pls check NO ERROR found -
Batch Traceability for Sugar as raw material during the production process
Dear Colleague ,
I need your support for a traceability issue in a customer on beverage sector
See the case below:
Batch Traceability for Sugar as raw material during the production process
In AMSB the batch traceability in some production processes is very difficult, especially in case of sugar where tanks wherein more than one batches of the same material can be mixed. For example, in a single day almost 17-20 batches of the same material can be mixed and as the result is a composition of water and sugar the normal FIFO rule strategy cannot be applied during the component consumption.
The raw material (sugar) is received in tank S5 at different points of time, and its content is transferred to tank B1 for storage purposes as well as for mix the sugar with other material such as water.
At a specific moment the S5 tank contains only a single batch, while the tank B1 contains more than one batch. Tank B1 is used in order to supply the production line and the corresponding material consumption is triggered in backflush as soon as the production activity is declared (production confirmation). Along with the material consumption the batch determination takes place and a complex algorithm is applied: at a very high level, the single batch is consumed depending on its percentage inside the mix of composition and in case the this
percentage is under a threshold level the current batch should be full used in order to avoid that it will exist for ever.
Moreover, the good movement reversal (reversal of material consumption) and its correction lead to a complete new calculation of all the batches consumed after the original movement date/time. This means that the algorithm for batch determination should be reapplied for all the consumptions subsequent to the original movement.
On the other hand it’s not possible to identify the mix of batches at the exit point of silos B1 because the total consumption of the material in the tank will never happen. As long as the tank level decreases it will be filled up from the tank used for receiving of sugar (S5).
As requirement AMSB needs to post the material consumption starting from EWM, this means that EWM should be the master system in this case and the correspondingmovements have to be transferred to ECC afterwards. This mainly because EWM should guarantee the business continuity in case the ERP system is not available.
AMSB asked if the scenario depicted has been implemented in some customer, in EWM system or in any other SAP solution.Hi ,
At the time of consumption you can put ' * ' aestrix sign in the batch field.
You will get list of batches of that material.select ur batch and consume the quantity.
Regards
Piyush -
QM for raw material 103 mv. type
Hello QM Gurus,
Please help me in following senario,
When I am doing GR for the raw material, I am posting the stock to blocked stock through 103 mov. type.
In system the inspection lot is being created but it is not in released status, although inspection plan is properly defined, hence I cannot do the result recording for the lot.
If anybody can suggest where the problem is.
Your king suggestion are expected.
Regards,
Amit Shirsath.I'm listing out some common mistakes because of which the Lot wont be in REL status.
First in MM03 QM view -check for the inspection type(01) and 05 for other GR to be active.This should be fine in ur case since your are saying the lot is created.Make sure the check mark Automatic assignment to be checked ,Check characs and also Insp with task list.
Second-Make sure the inspection Plan(QP01 display) was created with the same Key date as the Insepction lot or even earlier .The key date can be checked under qa03 to display Insp lot.
Third-make sure the Usage is the same as in the Inspection lot.The usage is the one which links the Plan to the Lot .It should be 5 for GR from PO and 53 for other GR in the insp plan. You can check the Inscpetion lot usage by going to QA03.
Check all these, ur problem should be solved.Please let me know if there is any furthur problem.And also reward if helpful and close the thread.
regards,
Naik -
Price list change according to raw material cost
Dear Experts,
We are currently working in a client where for those products for which the raw material is the main component as the cost of the raw materials varies with a high frequency (daily or weekly) the list price (the price we want to invoice to customers) should be updated accordingly and automatically with a specific mark up.
Have you found a similar requirement in any client? If yes, could you explain us from a functional perspective how (SAP standard functionality or custom development with a detailed explanation of the solution) you solved this requirement?
Is there any procedure to do regular massive updates of Finished Good price lists based on the actual variation (and/or expected variation) of raw materials cost?
Thanks in advance for your help.
M.BaigHi Baig,
It is possible to determine the price based on the raw material cost. I dont know whether you are using Moving average price or standard price for the raw material cost.
Whatever be the method, when you create the sales order, it is possible to take the raw material cost on the date of order creation using one of teh cost condition types like VPRS. You can use this condition type as statistical.
You can also have another condition type which is the mark up on this cost.
Now you can calculate your grossprice using another condition type which total up the cost in VPRS condition type adn the mark up %, either through just configuration or by means of a calculation type routine created in VOFM adn then assigning the same for the gross price condition type.
I you have any concerns, pls lemme know. -
Dear All,
We have executed CK11N of current period for single Raw Material ( w/o quantity struc. Selected in material master) and saved it, but when try to mark & release the material for the current period, the system displays a message as u201COf 0 materials, 0 cost estimates were updated successfullyu201D. Its newly procured raw material.
When we check in KEKO, KEPH & CKIS table the entry exists, but we are not able to execute the standard price for this raw material. In the start of this period we have executed CK40 for all the material (including raw materials) has been updated with standard price.
We have deleted the costing run couple of times and recreated the cost estimation,but of no use.
We have activated Material Ledger and this raw material has price control u2018Su2019 with price determination u20183u2019. We are in ecc 6.03
Do suggest.Hi ,
We are facing this problem for all type of material. Once we save cost estimation in CK11N and when we try execute once again CK11n for the same material system is calculating Cost estimation again without error message and we are not able to Mark & Release the Cost estimation.
Normally the system will not allow to calculate the cost estimation,if the cost estimation has been already calculated.
We have currently changed price control S from V for all type of material to maintain Standard cost from Actual cost.
Do suggest,if we have left out any config settings.
We are facing this issue in production client.
Do revert.
Regards, -
Cost Estimates taking raw material in CK40N
Dear Experts,
We are running Costing run using CK40n by selecting site & article
type:ZMTG. (Only Finished Product)
But Standard cost is displaying for ROH/VERP in CK13n/MM43.
We only want to carry out std cost run for only ZMTG article.
In Costing varinat Priority is set for "Valuation Price according to price control" so the value give is correct. But the standard price field is getting updated in material master for Raw Material.
I want to know usually whether it used to take like this, if not where i need to make changes so that it should not take while costing the finished product.
Please reply asap.Dear Abhisek,
It does not matter if the standard field updates with cost estimate, coz it does not effect financial results at all, reason behind the price control which is moving average for RAW materials.
Secodndly, it is helpful for you to find out the price of material when cost estimate was exucuted, coz it will not change until your further cost estimate run.
Raw Materials are part of BOM, so system always calculate their prices to reach at price of finish product, but system does not post any price change document for raw materials.
Further u can confirm using tcode CKMPCD
Regards,
M. Tayyab Aslam
Maybe you are looking for
-
When I try to drag files into my hard drive, it says the Finder can't complete the operation because some data can't be read or written (Error Code -36). This is happening even when dragging files back into the external drive which had originally com
-
Apple TV won't connect to the iTunes store.
At first, when I tried to access iTunes stores on my ATV to rent movies I got a message "iTunes Store is not currently available." I tried signing out and back in, and resetting the device but nothing works. Now the Movie rental doesn't even show up
-
Hi I am using Windows 7 on my desktop and today my Firefox browser opens links from emails in a new browser instead of a new tab. I do have "open new windows in a new tab instead" , under tools; options, Tabs ticked. I have tried unticking it and the
-
Hi, I have a currency field in the internal table and value is 34,53 with 2 decimals. How can I convert 34,53 to 34,530% with 3decimals and percentage to it while posting data to application server?
-
Hi... This is agustin. I am getting the oracle error while runnning my c++ appln.. which uses occi for connecting and accessing db. the error is ora-21500 internal error code.. please i ma not able to get into this,, any one tell me what may be the p