RAW TO HEX & HEX TO RAW
Hi,
I have one table with one field and datatype of this
field is RAW because I want to store data in binary format
I insert one record into this table using this command
INSERT INTO TEST VALUES(RAWTOHEX('MADHU'));
when I am doing SELECT it show all hex format.
How can I see this data ?
Thks
Madhu
null
Madhu
Try using the function we created below:
function hex_to_char(i_str VARCHAR2) RETURN VARCHAR2 IS
o_str VARCHAR2(2000) := NULL;
p_str VARCHAR2(2);
x INTEGER;
begin
x := 1;
while x < length(i_str) loop
p_str :=
chr(to_number(instr('0123456789ABCDEF',substr(i_str,x,1))-1)*16
+ to_number(instr('0123456789ABCDEF',substr(i_str,x+1,1))-1));
o_str := o_str
Similar Messages
-
When I try to open an image by double clicking on it in Bridge, I get a message telling me to log in to Creative Cloud. I am running CS6, and the default should be to open files in Photoshop 6 or in Adobe Raw (if it's a Raw file). I don't want to log into CC since I am not a subscriber, and this means that I have to work around, and go back to Bridge, and tell it to open the file in Adobe RAW. However, this does not work for older psd files which for some reason cannot be opened in RAW. How do I return to the process of simply allowing RAW files to open automatically in Adobe RAW, and simply right clicking on the image in Bridge to bring up the option of opening it in Photoshop?
<moved from Adobe Creative Cloud to Bridge General Discussion>
-
My Canon Rebel is no longer recording RAW images but set for RAW in manual mode.
I've tried changing memory card. My card's been recently formatted. I tried setting quality as RAW only not both RAW + Jpg...but still not getting RAW images in upload. Lightroom settings are fine and able to upload RAW from my Canon G12. I tried clearing setting but no affect. Is a factory reset a possible solution?
Debbie wrote:
Tahdah, tahdah and just plain dahhhh!!! I figured it out and if I share the answer I'll sound just plain stupid. But here goes in case someone else has the same problem, or should I say the same misunderstanding. In short, as it turns out I didn't have the quality set on RAW. I had checked, and rechecked the menu>quality window several times and each time misread it until I was just looking in the manual. In it the list of quality options is in a single column. In camera RAW is in a second column next to L with a quarter circle. I thought I had RAW selected. I'd been saying that the letter L was there. The manual, thank goodness, had the single column and said that was a JPG. Here I was reading about battery checks etc and there it was. I had been checking settings a while back and managed to change from RAW to JPG and not figured that I'd not changed back correctly. Whew!!! Call me dumb but I'm stupidly delighted right now ;o) Thanks to all those who tried to help.
OK, Debbie, maybe you'll feel better after I confess to doing something every bit as stupid. Recently my wife and I were driving home from a visit to our daughter's house in Philadelphia, and I used the opportunity to drop off my two 7D's and a couple of lenses at Canon's Jamesburg service facility for their usual cleaning and inspection. (I'm a CPS Gold Member, so it's an included perk.) I knew from previous experience that this would result in a partial clearing of the camera's user settings. Some items, like my name and copyright notice, would be left intact; but others, like my autofocus microadjustment settings, would be wiped. I was ready for that, had long since committed the AFMA's to a spreadsheet, etc.
But alas, I overlooked the fact that the quality setting that you cite above was one of those that would revert to its factory default. And the default is high-resolution JPEG, not RAW. (I always use RAW, and my favorite photo editor, Digital Photo Professional, does a crummy job on JPEGs.) So a week later I blithely walked into a moderately important photo shoot with one of my cameras set to JPEG. Fortunately, the other camera I was using, an almost new 5D Mark III, hadn't been to Jamesburg and was correctly set to RAW. But about two thirds of the photos I took were JPEGs, so I'll have to block out a few hours, sit down with Irfanview or some other editor, and try to fix things up. It doesn't much matter when I get it done, and the world won't come to an end, but it's pretty damned embarrassing.
So there you have it. We all make mistakes.
Bob
Boston, Massachusetts USA -
I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera. I have a Nikon 5100 DSLR Camera. It always displayed them in the past. How can I get it to display these photos in Bridge and open them in RAW?
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7 Update
Benjamin -
Opening multiple RAW files in Adobe Camera RAW
Former CS6 user. Now trying CC but can't find a way to select an open only the RAW files in ACR, in a folder that has both RAW and jpeg files. There are options for select certain types of files but RAW is not an option like it was in CS6. I need to be able to quickly open many RAW files in ACR without having to ctrl-click each RAW file to avoid opening the jpeg files.
I have more than 100 files in a folder. Half are RAW and the other half are the matching jpeg files. It is too cumbersome to use the ctrl key and select each of the 100 RAW files. You can select certain kinds of files in a dropdown box titles ALL FORMATS but unfortunately RAW files are not one of the options. In PS6, RAW files was one of the choices. I could screen for RAW files and then see only RAW files in my folder. I could then select one file, hold the shift button down and select any number of RAW files at once. I do thousands of pictures and need fast options. If all else fails I could select and open the RAW files do Adobe Camera RAW through Adobe Bridge but that adds another step.
So if anyone can figure out a faster way to open many RAW files at once in ACR, I would appreciate the help. -
I have CS4 and was using a Canon 5D Mark II with raw photos. I just got the Canon 5D Mark III and CS4 now can not read the raw photos. It has raw version 5.7.0.213 and CS4 version 11.0.2. Can anyone help?
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
EOS 5D Mark II
CR2
5.2
2.2
EOS 5D Mark III
CR2
6.7, 7.1
4.1
Photoshop CS6
7.0
8.3
Photoshop CS5
6.0
6.7
Photoshop CS4
5.0
5.7
The 5D Mark II was first supported by Camera Raw 5.2 which is compatible with CS4+.
The 5D Mark III was first supported by Camera Raw 6.7 and 7.1 which is only compatible with CS5 and CS6.
So the CS4 will never be able to open Raw 5D Mark III files.
Why doesn’t my version of Photoshop or Lightroom support my camera?
Choices:
Purchase CS6 full version (CS4 is too old to qualify for an upgrade)
Join the Cloud
Free option: download the free Adobe DNG converter, convert all 5D Mark III Raw files to DNG format then edit the DNGs in CS4
Photoshop Help | Digital Negative (DNG) -
How to Update Camera Raw 5.0 to Camera Raw 5.6 for Photoshop CS4
How to Update Camera Raw 5.o to Camera Raw 5.6 for Photoshop CS4?
I can access the the download button but after I depress it
I need specific step by step instructions from start to finish
Morty
[email protected]It would help us if you told us what operating system and version you are using.
generic instructions
Windows
1. Right click on the downloaded Camera_Raw_5_7_updater.zip
Click on Extract All
2. In the Extract All dialog check Show extracted files when complete, then click on Extract
3. When the next window opens showing the extracted files, right click on the Setup.exe and click on Run as Administrator.
In the User Account Control dialog click Yes
Just follow the directions in the install dialog when it opens
Mac
1. Double click on the downloaded Camera_Raw_5_updater.dmg to mount the dmg image
2. When the next window opens, double click on the Setup.app
In the next window enter your password
Just follow the instructions in the install dialog that appears
I didn't take screenshots of the installer dialogs, because i already have the 5.7 camera raw plugin installed -
Camera RAW does NOT yet support raw files for the new Canon Sureshot S95
Camera RAW does NOT yet support raw files for the new
Canon Sureshot S95.
Adobe, please can you provide an update asapHello!
I think that you need to be patient.
There has not been any release of Camera Raw since the release of the camera.
I recommend to try the next version once it will be released, as there might be preliminary support (and therefore not listed).
Usually, Adobe is amongs the firsts to support a new camera.
Even though the Camera Raw team is fielded with wonderful coders, I do not think that they do have a time machine to allow support before they have their hands on a camera -
Is there a download for lightroom2.7 that will allow it to use camera raw for a Canon T3i raw files?
Is there a download for lightroom2.7 that will allow it to use camera raw for a Canon T3i raw files?
Greylensmanta wrote:
Thank you for the imput. I don't know what you mean when you say LR doesn't use Adoble Camera Raw. My LR2.7 is able to process raw files from my 20D. I don't care if it does it with ACR or some other processing software. The issue is whether whatever software is used by LR can be updated to deal with new camera raw files. It is pretty annoying if it cannot be. I would even pay a reasonable amount if that were necessary.
ACR is a plug-in for Photoshop and Photoshop Elements which enables users to work on raw images from supported cameras. All of that technology that is in that plug-in is part of the Lightroom program, the plug-in is not used by Lightroom. ACR must be updated approximately 4 times each year in order to add support for new cameras and to make other changes in the plug-in. In order to get those changes in Lightroom, it is necessary to upgrade the entire Lightroom program. Interim releases are made available to Lightroom users who have purchased the program. For instance, if you purchased Lightroom 2, then versions 2.1, 2.2, 2.3, etc. are all available to you at no cost. But when Lightroom 3.0 is released or 4.0 is released, then it is necessary for you to purchase an upgrade in order to continue to get the updates. -
I have a canon 7d and my aperture version 3.4.5 is not recognizing the raw format? The Can not review any raw photo in the adjustments/raw fine tuning controls.
When i click on the adjustments everything is grayed out and the messages states " Image Not Found'.
Are you seeing broken arrows or yellow warning triangles, when you enable badge overlays?
That looks, like your original image files were missing. Are your images referenced or managed?
Create a smart album with the rules "Files status is missing" or "Files status is offline". This will show you any images, where the original raw files cannot be found. -
I tend to use Bridge ALOT and just recently i have come across the warning message above, t won't let me open my RAW images in Camera Raw in Bridge. Please could someone help me solve this problem it has hulled my work and its pilling up behind me
Thank youDetails, please. Platform, exact version of Photoshop and of your OS, what trouble shooting steps you've taken so far, etc,
First thing to try, if it had worked before, is to Purge the Cache in Bridge.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
When I am opening a .jpg image not an actual raw camera image from Elements 12 it is being opened as a camera Raw image and the image is cropped, I can't find anyway to get the image to uncrop or zoom out so that the entire image is visible so that I can actually edit it to something that is useable. The images were taken with an iPad and copied I suspect using the organizer from Elements 11 but I can't be sure. If I could just uncrop the opened image so that the entire image is visible this would not be a big deal.
Is there a way to uncrop the image that is being opened by Camera Raw? Am I going to have to get my hands on the source of the images (the iPad) and copy the images again using explorer and not let them be copied with the organizer?Uncheck the boxes at the bottom of the dialog Scale styles and resample Image so that only constrain proportions is checked. If you the change the resolution box from 240 to 300 you will get back to your original dimensions.
This is a meaningless thing to do, you still have the exact same number of pixels, you have only changed the metadata number in the file for ppi, and your prints are not affected by this number.
You could also use the same method to change the dimensions to 6 x 4 or 9 x 6 etc.
There are some cases (actually most cases) where you need to CROP the photo to change the dimensions, when the aspect ratio of the original photos is different than the aspect ratio of the final photo; the specific case in 99jon's example is the only case you ever want to change dimensions using Image->Resize->Image Size, where the aspect ratio doesn't change from 6x4 to 9x6 (or 12x8 or 18x12 or ...), and even then, you could do the same thing simply by telling the printer the size you want, you don't really need to do anything in PSE. -
I've tried updating the plug-in using PS Help CC but it updates with an old version. I downloaded 8.5 and did a manual install but Photoshop doesn't recognize it and the plug-in "cannot be found." I can see the plug-in on the HD drive where it was supposed to go. What am I missing here?
Try this if you are experiencing problems.: Camera Raw plug-in installer
Gene -
Corrupted RAW in Bridge CC, Camera RAW and Photoshop CC
Hello,
I am using up to date versions of Bridge CC, Camera RAW nad Photoshop CC and I have the following problem.
- after transfer photos from Canon EOS 6D to computer thumbnails in Bridge seems to be fine
- when I open file in Camera RAW file seem as below example
- when I open file in Photoshop CC file seem as below example
- when I open RAW in IrfanView image seems to be fine
- I can open image in IrfanView, save as TIFF and in Bridge and Photoshop seems to be fine
- the problem occurs randomly, about 5% of images from 500 images
Do you have similar problem? Does anybody have any idea?The previews are ok in Bridge because it's just a preview jpg, not the actual RAW file. I'm not sure why it would open OK in Irfanview. I had a similar problem after a HDD crash and tried Irfanview with no more luck than any of the Adobe programs.
Have you tried Adobe's DNG converter to see if you get the same result? Is this a consistent problem, or just this one time? -
How do I open a raw image with the Photoshop raw plug in as opposed to the Bridge raw plug-in.
I read in a book on adobe raw that it is often useful to open an image at the same time with the adobe camera raw bridge plug in and the Photoshop camera raw plug in.
I can open a raw image in photoshop but I suspect I am not actually getting access to the camera raw plug in as none of the controls present in the bridge raw plug seem to be available from within Photoshop.
Of course I can access bridge and the bridge raw plug in by opening bridge from within Photoshop but this is not what I want to do. I would like to open the image using the photoshop raw plug in not the bridge plug in.
Clueless . . . and confused.
--KenoliThanks for the discussion. It is interesting. Let me clarify a bit regarding my issue.
I am using Mountain Lion OSX on a mac, of course, and CS6. I have been using Aperture, a piece of Apple Software similar to Light Room to organize my images, opening them from Aperture in Photoshop to edit them, as I am both familiar with Photoshop and like the way it does things better than Aperture. I recently started using CS6 and working with Adobe Camera raw 7, which I think is the version that comes with CS6. All the info I can get from the web site, including a very nice tutorial from Adobe on camera raw, simply tells me to open it from Bridge. When I do this, I get a nice set of sliders and other adjustments specifically associated with Adobe Camera Raw and the camera I am using.
I can open a file in Photoshop using the method SkillRooster suggests and, sure enough, it opens it with the camera raw plug-in (if I simply open the image by double clicking on it it opens in photoshop, no plug-in). If I then go to bridge and open it from there, I don't get a second instance of Camera raw, it simply points me at the instance opened through Photoshop.
However, when I open a raw image in Photoshop from Aperture (raw images open with no problem) I simply get the Photoshop interface, not the camera raw plug-in, the same as if I had double clicked on the image to open it from outside of Aperture. I am trying to figure out if there is some way to open an image from Aperture in Photoshop so that it opens in the camera raw plug-in. One possibility I could imagene is to open it in Photoshop and from there open it in the plug-in. The only thing I see regarding this in Photoshop is a menu item that lets me close the image and open Bridge, which doesn't help me with my Aperture issue. I could decide to switch to bridge, but with the thousands of images I now have in Aperture, this would be quite a bit of work. I may just have to work with both going forward.
The root of my original question comes from something I recently read in a book by Bruce Fraser on Camera Raw which is excellent, but it focues on CS 5.5 as he died before being able to update it. In that book he describes a trick he uses where he opens the raw image in a plug-in in Bridge and then opens it a second time using a plug-in in Photoshop. This give him a chance to compare adjustments between the two open images. As I mentioned above, when I try to do this by starting with Photoshop and then going to Bridge, it points me at the same instance. I can't open it in Bridge and then Photoshop since once it is open in Bridge, it won't let me into Photoshop without closing the image in Bridge. I was thinking there might be something in Fraser's method that would help me with my Aperture issue, but can't reproduce what he describes.
Perhaps this was possible in CS5.5 but no longer in CS6.
Another work around I can imagine is to do all my raw editing from Bridge and then save the file as a DNG file in Aperture. I suspect that after that, I am stuck with doing any more raw editing using the Aperture camera raw funcions, which are a bit lacking compared with Adobe Camera Raw.
Hope I am being clear here about my dilemma. Any help would be welcomed.
--Kenoli
Maybe you are looking for
-
Hello and firstly, happy new year. I would like to optimize a connection between an applet the drivers of Oracle (Thin) and a data base Oracle. I have several question about the performance of this connection because for a transfer of 150 KB of usefu
-
More junk mail since I've made and applied rules...why?
I was getting 6-8 junk emails a day. It was recommended that I use rules to delete them and prevent them from re-occuring. Now that I have applied the rules I am getting two to three times more junk mail. Why is this happening?
-
I received an error 42404 message. I have uninstalled itunes, quick time, etc, etc. I then went to check that all the files had been deleted, however, Program files\common files\Apple - will not delete - it says folder access denied program files (
-
How to execute the *.sql when using occi and vc
help me! i must to initialize the remote database using the file of sql, for example: the file is ss.sql; and it is "DECLARE row integer := 0; user varchar2(256); BEGIN user := '&1'; dbms_java.grant_policy_permission('PUBLIC', 'SYS', 'java.lang.Runti
-
Hello, I currently am directing my college school mail account to my iPhone as an exchange account and it works perfectly. When I try to set it up the same way in Mail on my iMac, it doesn't work. I noticed on my phone it requires a domain name and o