RC-50204: Error: - s_oemweb_port in use: Port Value = 10000

when I am running 'perl adcfgclone.pl appsTier' for the external server DMZ setup I am getting the following error when enter the port pool as 0,
Enter the port pool number [0-99]:
0
Checking the port pool 0
RC-50221: Warning: Port Pool 0 is not free. Please check logfile C:\DOCUME~1\ora
user\LOCALS~1\Temp\\CloneContext_09260349.log for conflicts.
One of the line of the above log file reads,
RC-50204: Error: - s_oemweb_port in use: Port Value = 10000
Please advice.

Hi;
Enter the port pool number [0-99]:
0
Checking the port pool 0
RC-50221: Warning: Port Pool 0 is not free. Please check logfile C:\DOCUME~1\ora
user\LOCALS~1\Temp\\CloneContext_09260349.log for conflicts.What is your EBS verison...It can be possible this port using one another program?Did you try to do this wiht one other port number? Please check C:\DOCUME~1\ora> user\LOCALS~1\Temp\\CloneContext_09260349.log for more details
One of the line of the above log file reads,
RC-50204: Error: - s_oemweb_port in use: Port Value = 10000
Please check :Case History: Implementing a Reverse Proxy Alone in a DMZ Configuration - R12 [ID 726953.1] << part 4c
Hope it helps
Regard
Helios

Similar Messages

PDA build error when using a 'value change' event on two controls

I get a build error when I use a 'value change' event on controls of a different type or even a different numeric representation. I'm using LV 7.1 PDA with no other modules installed. Attached is a picture of the entire code and the error message.
Try to take over the world!
Attachments:
PDA Error.jpg ‏48 KB

Hi,
I verified the error that you are seeing. It appears to be a bug hence I have reported it to our developers. Hopefully this bug would be fixed in the next relaese of the PDA module.
Thank you for pointing this to us. It is through feedback that we can make LabVIEW PDA module even better.
Regards,
Ankita A.
National Instruments

CupsRasterinterpretPPD avait une erreur page header uses unsupported values

Problem printing from Photoshop and Epson Stylus Pro 7900 you have an explanation?
What does this error message: current print - "cupsRasterinterpretPPD" was an error = page header uses unsupported values.
thank you for your help

Update photoshop to the latest version (Help>Update...), that should fix it.

Error: Specify secure port in the property Using ports 7001/7002

          Hi,
          I have two node cluster using WL6.1, and Solaris.
          Then, I also setup NSAPI plug in, and specify 2 nodes
          in obj.conf file. But I tried to browse the URL.
          I have "Secure port in property..." error message.
          I check the SSL property in domain->servers->SERVERNAME
          Enabled:checked
          Listen Port: 9002
          Server Key File Name: config/mydomain/demokey.pem
          Server Certified File Name: config/mydomain/democert.pem
          Server Certifiled Chan File Name: config/mydomain/ca.pem
          Is the above correct setup?
          What am I missing?
          Thanks,
          // hiromu


Ok.. That makes more sense.
          So, before we fix the error message, I want to understand your architecture.
          You have NES(Iplanet) proxying requests to 2 managed servers that are
          clustered.
          Your managed servers also have the HttpClusterServlet setup to proxy back to
          those two instances? I think you may be a bit confused.
          The HttpClusterServlet is usually installed on another instance of
          WebLogic(managed server) if you are not using Iplanet, IIS, or Apache as a
          frontend WebServer. When you use the HttpClusterServlet, that WebLogic
          instance will act as a WebServer proxying requests to OTHER backend WebLogic
          Servers.
          In your case, you probably do not need to use the HttpClusterServlet as you
          are using Iplanet to proxy the requests.
          In any case, here is the fix to your problem:
          Refer to:
          http://e-docs.bea.com/wls/docs61///////adminguide/http_proxy_cluster.html
          The documentation says the format of specifying the defaultServers is
          host1:port:secport|host2:port:secport.
          Therefore, you need to add the secure port even though you aren't using it.
          Let's assume your secure port is 9002, then your entry should be:
          <init-param>
          <param-name>defaultServers</param-name>
          <param-value>cyberia:9001:9002|sun-timmy:9001:9002</param-value>
          </init-param>
          Regards,
          Eric
          "hiromu kato" <[email protected]> wrote in message
          news:[email protected]...
          >
          > Eric,
          >
          > The error message is from the managed server log as
          >
          > ####<Oct 2, 2001 9:26:02 PM PDT> <Notice> <WebLogicServer> <cyberia>
          <cluster2>
          > <ListenThread> <system> <> <000201> <ListenThread liste
          > ning on port 9001, ip address 10.10.102.189>
          > ####<Oct 2, 2001 9:26:04 PM PDT> <Notice> <Cluster> <cyberia> <cluster2>
          <main>
          > <system> <> <000102> <Listening for multicast messages
          > (cluster bvcluster2) on port 9001 at address 237.0.0.1>
          > ####<Oct 2, 2001 9:26:04 PM PDT> <Notice> <WebLogicServer> <cyberia>
          <cluster2>
          > <main> <system> <> <000330> <Started WebLogic Managed S
          > erver "cluster2" for domain "mydomain" running in Production Mode>
          > ####<Oct 2, 2001 9:26:16 PM PDT> <Info> <HTTP> <cyberia> <cluster2>
          <ExecuteThread:
          > '11' for queue: 'default'> <> <> <101047> <[WebAppS
          > ervletContext(1524862,bv,/bv)] HttpClusterServlet: init>
          > ####<Oct 2, 2001 9:26:16 PM PDT> <Error> <HTTP> <cyberia> <cluster2>
          <ExecuteThread:
          > '11' for queue: 'default'> <> <> <101048> <Please
          > specify secure port in the properties. Using ports 7001/7002. See release
          notes
          > for more info>
          > ####<Oct 2, 2001 9:26:16 PM PDT> <Error> <HTTP> <cyberia> <cluster2>
          <ExecuteThread:
          > '11' for queue: 'default'> <> <> <101048> <Please
          > specify secure port in the properties. Using ports 7001/7002. See release
          notes
          > for more info>
          > ****************
          >
          > I got the above error when I set web.xml
          > <?xml version="1.0" ?>
          >
          > <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application
          1.2//EN"
          > "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
          >
          > <web-app>
          >
          > <servlet>
          > <servlet-name>HttpClusterServlet</servlet-name>
          >
          <servlet-class>weblogic.servlet.internal.HttpClusterServlet</servlet-class>
          > <init-param>
          > <param-name>defaultServers</param-name>
          > <param-value>cyberia:9001|sun-timmy:9001</param-value>
          > </init-param>
          > <init-param>
          > <param-name>DebugConfigInfo</param-name>
          > <param-value>ON</param-value>
          > </init-param>
          > </servlet>
          > <servlet-mapping>
          > <servlet-name>HttpClusterServlet</servlet-name>
          > <url-pattern>/</url-pattern>
          > </servlet-mapping>
          > <servlet-mapping>
          > <servlet-name>HttpClusterServlet</servlet-name>
          > <url-pattern>*.jsp</url-pattern>
          > </servlet-mapping>
          > <servlet-mapping>
          > <servlet-name>HttpClusterServlet</servlet-name>
          > <url-pattern>*.htm</url-pattern>
          > </servlet-mapping>
          > <servlet-mapping>
          > <servlet-name>HttpClusterServlet</servlet-name>
          > <url-pattern>*.html</url-pattern>
          > </servlet-mapping>
          > </web-app>
          >
          > **********************
          > My obj.conf of the NES is
          >
          > Init fn="load-modules" funcs="wl_proxy,wl_init"
          shlib=/mebsuta/b/webserver/https-http-mebuta-hkato-50005/plugins/libproxy.so
          > Init fn="wl_init"
          >
          > Init fn=load-types mime-types=mime.types
          > Init fn="load-modules"
          shlib="/mebsuta/b/webserver/bin/https/lib/libNSServletPlugin.so"
          >
          funcs="NSServletEarlyInit,NSServletLateInit,NSServletNameTrans,NSServletServ
          ice"
          > shlib_flags="(global|now)"
          > Init fn="NSServletEarlyInit" EarlyInit=yes
          > Init fn="NSServletLateInit" LateInit=yes
          >
          >
          > <Object name="weblogic" ppath="*/weblogic/*">
          > Service fn=wl_proxy WebLogicCluster="cyberia:9001,sun-timmy:9001"
          PathTrim="/weblogic"
          > </Object>
          >
          > <Object name="si" ppath=*/servletimages/*">
          > Service fn=wl_proxy WebLogicCluster="cyberia:9001,sun-timmy:9001"
          > </Object>
          >
          >
          > <Object name=default>
          > NameTrans fn="NSServletNameTrans" name="servlet"
          > NameTrans fn="pfx2dir" from="/servlet"
          dir="/mebsuta/a/hkato/docs_50005/servlet"
          > name="ServletByExt"
          > NameTrans fn=pfx2dir from=/ns-icons dir="/mebsuta/b/webserver/ns-icons"
          name="es-internal"
          > NameTrans fn=pfx2dir from=/mc-icons dir="/mebsuta/b/webserver/ns-icons"
          name="es-internal"
          > NameTrans fn="pfx2dir" from="/help"
          dir="/mebsuta/b/webserver/manual/https/ug"
          > name="es-internal"
          > NameTrans fn="pfx2dir" from="/manual"
          dir="/mebsuta/b/webserver/manual/https"
          > name="es-internal"
          > NameTrans fn=document-root root="/mebsuta/a/hkato/docs_50005"
          > Service method="(GET|HEAD|POST|PUT)" type=text/jsp fn=wl_proxy
          WebLogicCluster="cyberia:9001,sun-timmy:9001",
          > PathPrepend=/jspfiles
          > PathCheck fn=unix-uri-clean
          > PathCheck fn="check-acl" acl="default"
          > PathCheck fn=find-pathinfo
          > PathCheck fn=find-index index-names="index.html,home.html"
          > ObjectType fn=type-by-extension
          > ObjectType fn=force-type type=text/plain
          >
          > Service method=(GET|HEAD) type=magnus-internal/imagemap fn=imagemap
          > Service method=(GET|HEAD) type=magnus-internal/directory fn=index-common
          > Service method=(GET|HEAD|POST) type=*~magnus-internal/* fn=send-file
          > #AddLog fn=flex-log name="access"
          > </Object>
          >
          > <Object name=cgi>
          > ObjectType fn=force-type type=magnus-internal/cgi
          > Service fn=send-cgi
          > </Object>
          >
          > <Object name="servlet">
          > ObjectType fn=force-type type=text/html
          > Service fn="NSServletService"
          > </Object>
          >
          > <Object name="jsp092">
          > ObjectType fn="type-by-extension"
          > ObjectType fn="change-type" type="magnus-internal/jsp092"
          if-type="magnus-internal/jsp"
          > Service fn="NSServletService" type="magnus-internal/jsp092"
          > </Object>
          >
          > <Object name="ServletByExt">
          > ObjectType fn=force-type type=magnus-internal/servlet
          > Service type="magnus-internal/servlet" fn="NSServletService"
          > </Object>
          >
          > <Object name="es-internal">
          > PathCheck fn="check-acl" acl="es-internal"
          > </Object>
          >
          >
          > Thank you for the help,
          >
          > // hiromu
          >

My Application gets Error 37 when using Serial Port VIs.

My Application works fine developed with LV 6.1. Then I updated to LV 7.1 and now the Executable of my application gets error 37 when using the old serial port functions. The "serpdrv" file is located in the application directory and is from 02/2002. The application runs well in the development environment after I placed the "serpdrv" file in the LabView directory. I tried to put a line with "serialDevices=..." in the .ini-file of my application but this did not cause an improvement. I also tried to rebuild the EXE with this line in the "labview.ini" file but nothing changes.
Does anybody have another idea ?
Many thanks for help
Thomas

>Did you actually replace the old serial functions that come with 7.1 with the functions from 6.1?
Yes. E.g. "open serial driver.vi" uses "open device" with "serpdrv" as device string.
I had the same problem running my application as VI´s. After the copy of serpdrv into the LV 7.1 directory everything works fine.
I don´t understand why the application running as a .exe doesn´t find the serpdrv when it is in the same directory....
Nevertheless many thanks for your answer
Thomas

EPMCFG-10368 error when trying to use port 1251

I have worked with EPM11 for a few years but am new on working with server-side issues. Our team is phasing out the use of port 1521 and are using port 1251. Does EPM 11.1.2.2 support port 1251? If so, are there instruction in how to set this up? is there any alternatives other than 1521 and do I need to configure this outside of the EPM System Configurator.
Right now, I am stuck in the Configuration process because I cannot connect to the database.

It support all ports if they are open (if your firewall is not blocking it)
I would recommend you to use the EPM System Configurator itself to update the connections.
Regards
Celvin
http://www.orahyplabs.com

Oracle 11g install failure, error, Failed to allocate port(s)

I'm having a very hard time reinstalling Oracle 11gR1 x64 bit after the hard drive where I first installed it failed and had to be replaced. The database I'm trying to setup is for personal use on this system only. I'm running Windows XP professional 64 bit edition and have .net framework version 1.1.4322.573 installed.
During installation the process hangs at the Database Configuration Assistant stage and will not progress till I manually end the lsnrctl.exe process in taskmanager. During the completing database process at the end I get this error -
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
My first thoughts were the ports in question were in use or closed but I've been using both netbios and a port monitor program called currports to check and as far as I can tell the ports listed are open and not in use.
I did reconfigure the tnsnames.ora and listener.ora files to include valid port addresses (1521) and I can get the lsnrctl.exe to start manually now but still can't connect to the database using an open SQL command prompt.
I also tried running the emca.bat but still no change. I need help, I'm beating my head against the wall now.
Here are my etc/hosts, etc/services, and emconfig.log files
etc/hosts
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
172.23.153.30     gcihq1

emconfig.log
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-migrate' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateFromDBControl' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateToCentralAgent' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateFromCentralAgent' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateToDBControl' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-migrate' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateFromDBControl' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateToCentralAgent' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateFromCentralAgent' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateToDBControl' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: LOG_FILE value: G:\MainDB\cfgtoollogs\dbca\MainDB\emConfig.log
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: HOST value: gcihq1
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: PORT value: 1521
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SID value: MainDB
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: LISTENER value: LISTENER
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: LISTENER_OH value: G:\MainDB\DBHousing
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-config' set to true
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'db' set to true
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: EM_HOME value: G:\MainDB\DBHousing
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: MainDB
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: MainDB
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: ORACLE_HOME value: G:\MainDB\DBHousing
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'dbcontrol' set to true
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'UPDATE_EMAIL' set to false
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-backup' set to false
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'create' set to false
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig addEMCALogFile
CONFIG: ORACLE_BASE :G:\MainDB
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file G:\MainDB\cfgtoollogs\emca\emca_2010_03_22_17_48_04.log to G:\MainDB\cfgtoollogs\emca\MainDB\emca_2010_03_22_17_48_04.log
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at G:\MainDB\cfgtoollogs\dbca\MainDB\emConfig.log.
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
CONFIG: isCRSInstalled: false
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'CHECK_CONFIG' set to true
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: DBSNMP
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: MainDB
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: MainDB
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: MainDB
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBID.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbid
CONFIG: No dbid available. Will query db to extract it.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBID value: 1536995688
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYSMAN
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: MainDB
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file G:\MainDB\DBHousing\sysman\config\emd.properties to G:\MainDB\DBHousing\sysman\config\emd.properties.emca.tmp
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file G:\MainDB\DBHousing\sysman\config\emd.properties has been copied to G:\MainDB\DBHousing\sysman\config\emd.properties.emca.tmp
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file G:\MainDB\DBHousing\sysman\config\emoms.properties to G:\MainDB\DBHousing\sysman\config\emoms.properties.emca.tmp
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file G:\MainDB\DBHousing\sysman\config\emoms.properties has been copied to G:\MainDB\DBHousing\sysman\config\emoms.properties.emca.tmp
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file G:\MainDB\DBHousing\sysman\emd\targets.xml to G:\MainDB\DBHousing\sysman\emd\targets.xml.emca.tmp
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file G:\MainDB\DBHousing\sysman\emd\targets.xml has been copied to G:\MainDB\DBHousing\sysman\emd\targets.xml.emca.tmp
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
CONFIG: isCRSInstalled: false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Cluster.isCluster: false. Skip call to getLocalNode
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: MainDB Host: 172.23.153.30 Node: null OH: G:\MainDB\DBHousing agentHome: null isCentral: false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: MainDB Host: 172.23.153.30 Node: null OH: G:\MainDB\DBHousing isDBC: false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: MainDB Host: 172.23.153.30 Node: null OH: G:\MainDB\DBHousing isDBC: false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_MainDB.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_MainDB.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_MainDB.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_MainDB.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [G:\MainDB\DBHousing]
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME G:\MainDB\DBHousing
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from G:\MainDB\DBHousing\oc4j\j2ee\OC4J_DBConsole
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from G:\MainDB\DBHousing\oc4j\j2ee\OC4J_DBConsole
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from G:\MainDB\DBHousing\oc4j\j2ee\OC4J_DBConsole
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from G:\MainDB\DBHousing\sysman\config\emd.properties
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file G:\MainDB\DBHousing\install\staticports.ini
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
Refer to the log file at G:\MainDB\cfgtoollogs\dbca\MainDB\emConfig.log for more details.
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
     at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2481)
     at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:744)
     at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:251)
     at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:178)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:221)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
     at java.lang.Thread.run(Thread.java:595)
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
------------------------------------------------------------------------------------------------------------------------------

Error 412 whilst using ASA5520 for VPN

Hi
Hope somebody can help. I'm trying to use a new ASA 5520 to terminate my remote access VPN's. The remote clients use the cisco VPN client V5. I'm using the configuration below and testing using a laptop directly connected into the same VLAN as the outside interface. I can ping the outside interface, but when I try to connect using the client I get Error 412: Peer not responding. Debugging ISAKMP on the ASA shows no attempt to connect. The laptop will connect to our existing VPN without a problem.
Does anyone have any ideas that may help me out.
Many Thanks
Rob
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address
passwd encrypted
boot system disk0:/asa722-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name
access-list 101 extended permit tcp any host *eq https
access-list 101 extended permit tcp any host * eq smtp
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu dmz 1500
mtu management 1500
ip local pool pool 192.168.0.10-192.168.0.15
failover
failover lan unit primary
failover lan interface failover GigabitEthernet0/3
failover key *****
failover link failover GigabitEthernet0/3
failover interface ip failover 192.168.20.1 255.255.255.0 standby 192.168.20.2
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-522.bin
asdm history enable
arp timeout 14400
nat-control
global (outside) 1 * netmask 255.255.255.0
nat (inside) 1 * 255.255.0.0
static (inside,outside) netmask 255.255.255.255
static (inside,outside) netmask 255.255.255.255
access-group 101 in interface outside
route outside 0.0.0.0 0.0.0.0 * 1
route inside * 255.255.0.0 * 1
group-policy csmavpn internal
group-policy csmavpn attributes
dns-server value *
vpn-tunnel-protocol IPSec
default-domain value *
client-firewall none
username testuser password * encrypted
service resetoutside
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map Outside_dyn_map 1 set transform-set ESP-3DES-SHA
crypto dynamic-map Outside_dyn_map 1 set security-association lifetime seconds 288000
crypto map Outside_map 1 ipsec-isakmp dynamic Outside_dyn_map
crypto map Outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 43200
crypto isakmp ipsec-over-tcp port 10000
tunnel-group vpn1 type ipsec-ra
tunnel-group vpn1 general-attributes
address-pool pool
tunnel-group vpn1 ipsec-attributes
pre-shared-key *
peer-id-validate nocheck
isakmp ikev1-user-authentication none
telnet * 255.255.255.255 management
telnet timeout 5
ssh timeout 5
console timeout 0
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns migrated_dns_map_1
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
ntp server * source dmz prefer
prompt hostname context

We have the same Problem with VPN-Client V5. But the Version 4.8 ist OK.
The only difference between this two Versions is, that V4.8 uses Port 500 as Source Port and V5 uses Port 1501 as Source Port. Both Versions uses the same pcf-File.
I have captured the packets and this was the only difference in both Packets.
But I don't know, how I can fix this Problem.
Do you get a solution since your posting?
Michael

How to use Default value in a column in Tabular form in insertion or upda

Hello,
I am trying to use Default values so that user need not have to enter data, but when I select default type and put a default value, I see an error message, if I try to add a new row.
How can I use a default value in a Column in a Tabular Form?
Gouri
Edited by: user1046395 on Apr 3, 2009 9:58 AM

Gouri,
You can just simply edit to each column's report attribute. For example,
To set default date,
Default Type: PL/SQL Expression of Function
Default: sysdate
To set default text,
Default Type: PL/SQL Expression of Function
Default: *'CLERK'*
If you still have an error, what is the error message?
Ittichai

How do I use Port Mapping?

b How do I use Port Mapping?
(This document will assume that you are using and ABS/AEBS/AX as an internet router and have DHCP & NAT turned on.)
Sometime you may want to offer access to a computer on your AirPort network to users on the internet, whether it be a web site, or for file sharing, or just remote access for yourself when traveling. If any of these sound like something you want to do, then you need to understand how Port Mapping works.
b AirPort as Firewall
Most of the time your AirPort base station will not let any traffic into your network which did not originate from your network. It will let everything out and replies to your traffic back in, but it will not let sessions initiated on the internet side of the base station in to your network. This is what is referred to as the "NAT firewall" capability of the base station and it provides effective protection for your network from the internet. What Port Mapping does is poke a hole in this wall to allow certain type(s) of traffic into the network and direct this traffic to a specific computer on the network. In the firewall world this is commonly referred to as an "inbound proxy" or "inbound translation" rule or "PAT" (Port Address Translation) in the router world.
b The Need for Manual Addressing
Since a Port Mapping entry in the base station configuration requires an inside private IP address to be specified, the computer to which to mapping entry applies should always have the IP address specified in the mapping entry. Thus, DHCP should not be used for a computer offering services on the internet as the Port Mapping entry will no longer work if the target computer's IP address changes. In general, an Apple base station's DHCP server will try to assign IP addresses in the 10.0.1.2 to 10.0.1.200 range. IP addresses above 10.0.1.200 can be Manually assigned to computers and other devices on the network up to 10.0.1.254. 10.0.1.255 is reserved (it is the broadcast address for the 10.0.1 subnet). To Manually set up the TCP/IP information for a Macintosh running Mac OS X, go to System Preferences -> Network and "Show" the appropriate interface (Ethernet or AirPort) and click on the TCP/IP tab. Select "Configure Manually" and enter the following information:
IP address : 10.0.1.201 (or whatever address you decide to use)
Subnet mask : 255.255.255.0
Router IP : 10.0.1.1 (the AirPort base station LAN IP)
DNS server : 10.0.1.1, or whatever DNS server IP your ISP uses
After making these changes verify that your computer can still access the internet and local resources on the LAN before continuing.
b Port Mapping a service
In our example we will be hosting a web site on a computer which we have given an IP address of 10.0.1.201. Basic web sites are accessed using the HyperText Transport Protocol (HTTP) and this protocol typically uses port 80 to communicate. In order for others to see the web site, we must configure a Port Mapping entry in the base station configuration to not only allow the web browsers in, but to tell the base station what IP address the web server is using. The Port Mapping entry has three parts: Public Port, Private IP, and Private Port. In this case you would use the following values:
Public Port : 80
Private IP : 10.0.1.201 (this is the computer hosting the web site)
Private Port : 80
In order to access the web site from the internet, users must reference the base station's WAN port public IP (determined by looking at the base station configuration summary page in the AirPort Admin Utility). Since this address may change over time, you might want to use a Dynamic DNS service to simplify connecting for your users.
Sometimes the port you wish to use may be blocked by the ISP. In this case, use a different non-standard Public Port number for the service, but keep the Private Port standard. In the above example, if the ISP was blocking port 80, you could potentially use 8080 instead, so:
Public Port :

Public Port : 8080
Private IP : 10.0.1.201
Private Port : 80
Your users would then have to enter "http://<publicIP>:8080/" (where <publicIP> is the public IP address of the AirPort base station) to access the web site.
b Internal Access
It should be noted that when accessing these services from within the network you cannot reference the Public IP/Public Port, but rather you must use the Private IP/Private Port. Thus, "http://10.0.1.201:80/" in the above example.
b Limits and Options
There is a maximum of 20 Port Mapping entries that can be made in an Apple base station configuration. If you use an AirPort Extreme or AirPort Express base station there is an option which can be helpful in the case where you need many ports opened to a single computer. This is the "Default Host" option. When using this it is not necessary to use Port Mapping at all as all ports will be opened to the specified "Default Host". This is found in "Base Station Options". The default IP address for the "Default Host" is 10.0.1.253. You may change this IP address. The target computer must be Manually configured as specified above with the same IP address. Since all ports are now open to this computer, you should enable and configure the Mac OS X firewall on the default host computer to protect it from intruders.
b Useful Related Links
<a href="http://docs.info.apple.com/article.html?artnum=52002>"Designing AirPort Extreme Networks: Manuals</a>
"Well Known" TCP and UDP Ports Used By Apple Software Products
IANA Port Number Assignments

How to use Table valued MSSQL function in OBIEE

Hi all,
Can some one help me to understand how to use table valued function in OBIEE? I want to use a table valued function (MSSQL function, with some input parameter), in the physical layer to pull the data?
I know for MSSQL Stored Procedure we can write as
EXEC SP_NAME @Parameter = 'VLUEOF(NQ_SESSION.Variablename)'
but now I have a table valued function in the query window I can get the data as
select * from myfunction(parametervalue)
In physical layer of OBIEE I have tried as
select * from myfunction('VLUEOF(NQ_SESSION.Variablename)'), but I'm getting error as the NQ_SESSION variable doesn't have a value , but actually I have initialized the variable but still Im getting error.
Can some one help me to solve this.
Thanks,
Mithun

Follow this link and try yourself. let me know for issues
Substring instr issue in obiee
Appreciate if you mark
Edited by: Srini VEERAVALLI on Feb 20, 2013 8:13 AM

Can you use the value from a numeric indicator in a numeric control?

Hi!
I have to develop a code where I have to find the maximum value of a waveform and draw a line at 50% of the value. So I chose to find the amplitude of say 10 cycles of waveforms and found the maximum value out of the amplitudes.
But my real problem is, I have to use the maximum amplitude value that I get from the max. array VI and put it back in program to calculate the 50% value.
So is it possible to use the value from a numeric indicator and put it in a numeric control? Like in MATLAB or C, you give the variable a name and use it later to do any computations. Is it possible to do something similar in LabVIEW?
Solved!
Go to Solution.

Hi!
Thank you very much for taking some time out. I have been trying to do this since 2 months and I am stuck right where I am.
The situation is, I have to calculate the amplitude of the irregular waveform for a few trials and then find the maximum amplitude out of the trials and display a line at whatever % of amplitude the user chooses. I tried using property nodes but I am getting Error 1055 for some unknown reason. Then I decided to draw the line using DC offset but it turns out it calculates the amplitude each time and so the line keeps dancing everytime. Now my challenge is to have the amplitude calculated for say, 20 loops and then calculate the max from that. I ran out of ideas so I am posting here. I am using LabVIEW version 8, and I'll upload a few of my attempts. I hope I am not troubling you'll much.
Attachments:
amplitude display.vi ‏217 KB
amplitude display 1.vi ‏148 KB
Using property node.vi ‏56 KB

WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.

Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain

Error Message "No logical port exists to call web services" installing SM7

I am trying to use SLM to download a service stack. However, the option is not available in step 2.5. There is an error message "No logical port exists to call web services". I have performed the Wizard install, but the Wizard seems to have left out this step. I have looked around for documentation on how to configure the port, but cannot find anything more useful than comments to the effect that I should configure the port.

I found the problem, I think, although I am now on to the next problem. "Web Services for software lifecycle manager not available'.
The documentation is lacking. When the RFC connection is set up, the user id is j2ee_admin, using the install password. This is not specified anywhere in the install instructions that I could find, there is only a reference to a 'user id and password'.
The LPCONFIG is used to create a logical port, that ties the RFC to the LP. However, no name is specified that is to be used for the LP.

Error while saving dynamic row values of datagrid with record.

hi friends,
i am trying to add dynamic row in datagrid and save that value with record.i succeeded in first part while i am saving the record the error show like this.
errro:Property fromAmount not found on com.ci.view.Task and there is no default value.
how i resolve this error.
any suggession welcom
thanks in advance.
B.venkatesan
code:
package:
package com.ci.view
    [Bindable]
    public class Task
        public function Task(frmAmount:String,toAmount:String,commissionPercentage:String)
            this.frmAmount=frmAmount;
            this.toAmount=toAmount;
            this.commissionPercentage=commissionPercentage;
        public var frmAmount:String;
        public var toAmount:String;
        public var commissionPercentage:String;
main mxml:
[Bindable]
            private var tasks:ArrayCollection;
            private static const ADD_TASK:String= "";
            private function init():void
                tasks = new ArrayCollection();
                tasks.addItem(new Task("0","1000","0"));
                tasks.addItem({frmAmount:ADD_TASK});
            private function checkEdit(e:DataGridEvent):void
                // Do not allow editing of Add Task row except for
                // "Click to Add" column
                if(e.rowIndex == tasks.length - 1 && e.columnIndex != 0)
                    e.preventDefault();
            private function editEnd(e:DataGridEvent):void
                // Adding a new task
                if(e.rowIndex == tasks.length - 1)
                    var txtIn:TextInput =TextInput(e.currentTarget.itemEditorInstance);
                    var txtIn1:TextInput =TextInput(e.currentTarget.itemEditorInstance);
                    var txtIn2:TextInput =TextInput(e.currentTarget.itemEditorInstance);
                    var dt:Object = e.itemRenderer.data;
                    // Add new task
                    if((txtIn.text) != ADD_TASK)
                        var x:String=String(txtIn.text);
                        tasks.addItemAt(new Task("", "", ""), e.rowIndex);
                    // Destroy item editor
                    commPlanDetGrid.destroyItemEditor();
                    // Stop default behavior
                    e.preventDefault();

Venktesan,
You are trying compare String and int..! which is not possible try to case the txtIn.text to int using parseInt(txtIn.text).
ORIGINAL:
if(txtIn.text != ADD_TASK).---->error : Comparison between a value with static type String and a possibly unrelated type int
                    tasks.addItemAt(new Task(txtIn.text, 0, ""), e.rowIndex);----> error:Implicit coercion of a value of type String to an unrelated type int.
EDITED:
if(parseInt(txtIn.text) != ADD_TASK).---->error : Comparison between a value with static type String and a possibly unrelated type int
                    tasks.addItemAt(new Task(parseInt(txtIn.text), 0, ""), e.rowIndex);----> error:Implicit coercion of a value of type String to an unrelated type int.
Thanks
Pradeep

RC-50204: Error: - s_oemweb_port in use: Port Value = 10000

Similar Messages

Maybe you are looking for