RD WebAccess doesn't show RemoteApps while using RD Connection Broker

Environment:
All servers have Windows Server 2008 R2 installed
Remote Desktop Session Hosts:
RDSH01
RDSH02
RDSH03
# Installed roles:
Remote Desktop Session Host
 Remote Desktop Web Access
# Local Users and Groups:
TS Web Access Computers --> Member: RDSH01, RDSH02, RDSH03
Remote Desktop 
Session Broker:
DC01
# Installed roles:
Active Directory Domain Services
Remote Desktop Licensing
Remote Desktop Connection Broker
# AD groups:
Session Directory Computers --> Member: RDSH01, RDSH02, RDSH03
TS Web Access Computers --> Member: DC01, RDSH01, RDSH02, RDSH03
## Problem ###
For some users the RemoteApps will not be displayed on RD Web Access Web site when the
RD connection broker DC01 is used as source! If one of the three servers is selected as RemoteApp source it works without any error.
On DC01 I find the message “Error in the WMI interface to rdfarm.domain.local. Check that the machine is running and connected to the network. If the
problem persists, reboot the machine. Error Code: 0x800706BA“. All connections, pings, nslookup including FQDN request works fine.
WMI and DCOM are also checked, security permission and group membership is correct. Firewalls are all disabled!
Any idea what to check next?

Hi,
Thank you for posting in Windows Server Forum.
The error which you are facing seems to occur because the communication between the RD web access and RD connection Broker is not communicating. Please verify the below two things.
1.  Verify that the RemoteApp and Desktop Connection Management service is started.
2.  Log on to the RD Web Access server that is configured to use the RD Connection Broker server.
The RD Web Access server that is configured to use the RD Connection Broker server must be available to communicate with the RD Connection Broker server.
a.  To open Remote Desktop Web Access Configuration, click Start, point to
Administrative Tools, point to Remote Desktop Services, and then click
Remote Desktop Web Access Configuration.
b.  In the Domain\user name box, type a valid domain and user account name.
c.  In the Password box, type the password for the user account.
d.  Verify that you can successfully log on to the RD Web Access server by using Remote Desktop Web Access Configuration.
More information:
Event ID 1000 — RemoteApp and Desktop Connection Management Communication
If still not resolved then please check the below Q&A regarding RD Connection Broker.
Q. I’m using RD Connection Broker as the RemoteApp source in RD Web Access, but RD Web Access isn’t showing any icons. Why?
A. There are several reason for this, at last it found a bug. “There’s a
known bug where Windows Management Instrumentation (WMI) permissions for the Terminal Services namespace disappear, leaving RD Web Access unable to query RD Connection Broker as a RemoteApp source. Re-adding the
RD Web Access server to the TS Web Access Computers group on RD Connection Broker resolves this issue for a while (but will most likely happen again over time). See
this TechNet Forum thread for more details and possible work-arounds.”
More information.
Microsoft Windows Server 2008 R2: Understand the RD Connection Broker
Hope it helps!
Thanks,
Dharmesh

Similar Messages

  • I m trying to send a email and sms alert using php and it works fine on all systems except on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india. plz help

    I m trying to send a email and sms alert to people and it works fine on all systems expect on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india.
    the code i m using is right below,plz have a look and not into the problem as problem is a bit strange.
    $headers = "MIME-Version: 1.0\n" ;
                $headers .= "Content-Type: text/plain; charset=\"UTF-8\"\n";
                $headers .= "X-Priority: 1 (Highest)\n";
                $headers .= "X-MSMail-Priority: High\n";
                $headers .= "Importance: High\n";
                // Additional headers
                $headers .= 'From: Rakesh <[email protected]>' . "\r\n";
                foreach($disemail as $email)
                    $to = $email;
                    $subject = $succMessage['email_subject'];
                    $message = $smsText;
                    mail($to,'=?UTF-8?B?'.base64_encode($subject).'?=',$message,$header);
            if (stripos($_SERVER['HTTP_USER_AGENT'], 'MSIE') !== FALSE) {
            $smsText = utf8_encode($smsText);

    i have tried this new charset combination specifically for iphone and i m waiting for response from sweden alliance.....i hope this works fine as iso works great for 8-bit characters.
    would like to have your thoughts though.
    $headers .= "Content-Type:text/plain; charset=\"iso-8859-1\"\n  format=flowed Content-Transfer-Encoding: quoted-printable";

  • Airplay (ios7, osx mavericks) doesn't show up by using my airport express (6.2.3)?

    Why does Airplay (ios7, osx mavericks) doesn't show up by using my airport express (6.2.3)?

    Hi tease.ch!
    Here is an article for you that will help you troubleshoot this issue with your ability to AirPlay:
    iOS: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts4215
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • When I go to plug in my iPhone 5 to my PC it will charge my phone but it doesn't show up that it's connected to my computer or in iTunes. I have tried just about everything that I can find on the internet but nothing is working. Any other suggestions?

    When I go to plug in my iPhone 5 to my PC it will charge my phone but it doesn't show up that it's connected to my computer or in iTunes. I have tried just about everything that I can find in the support discussions but nothing has worked. Any other suggestions?

    If you have carefully follow ALL of the steps in that article, you are using a USB port directly on your computer and not a USB hub (don't use a front port on a tower or desktop either, as they are an internal hub) and you installed iTunes correctly using an Administrator ID and you have tried disabling your antivirus and firewall then there is no hope of it ever working. Look at the tip again, and go through it carefully, not skipping any steps.
    Note, BTW, that an iPhone will not show up on a computer, only in iTunes. If there are photos in the Camera Roll then it will appear in Windows as a digital camera only.

  • Problem with Progress DB while using to connect using JDBC Adapter

    Hi,
      I am facing Problem with Progress DB while using to connect using JDBC Adapter. I am getting the following error in auditlog file like,
    Error during database connection to the database URL  jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb 
    /devsche/i_apoext.db using the  JDBC driver "com.progress.sql.jdbc.JdbcProgressDriver" : com.sap.aii.adapter.jdbc.sql.DriverManagerException: Unable to locate a suitable JDBC driver to establish a connection to URL " jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb 
    /devsche/i_apoext.db "
    I tried using the following all URLs,
    1. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.       
    2. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.db     
    3.                                                      
    jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb 
    /devsche/i_apoext.                                      
    4.                                                      
    jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb 
    /devsche/i_apoext.db.                                  
    Can anyone please help me out in solving this issue.
    May be the cause for this is :
    1) The Wrong URL  format
    2) CLASSPATH is not setted properly..
    Can you look more into this stuff.
    Thanks,
    Soorya.

    Hi,
    To access any database fromm XI, using the JDBC adapter, the corresponding drivers have to be installed on the XI server.
    Just check this note 831162.
    Also, check this PDF to install Drivers in XI,
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10

  • SQl developer v1.1 doesn't show synonyms that use dblinks.

    Sql developer v1.1 doesn't show in the list of synonyms those whose destiny is accesed through dblink. It only shows the synonyms of local objects.

    I found SQL Developer support for SQL Server too limited for anything other than simple queries on tables/views.
    Squirrel SQL client (open source, free and also java based) may prove a better tool.
    http://squirrel-sql.sourceforge.net/

  • Opendocument link showing parameter while using lsS

    Hi,
    We are using OpenDocument to view a report. We want to pass the default values to the parameters for crystal report. While using lsS when the date is specified to the parameter the parameter to which the value is assigned stops getting displayed in the parameter panel.
    We want to display the parameter with the default value which is passed.
    Is there a solution for the same?
    Regards,
    Simran

    Well, there isn't a 'neat' way to do this other than the Java way.
    Here are some options though:
    1) Create a command object with a SQL query that returns one row and one column in the form of 'first day of last month'. Change the existing Date prompt type in your report to 'dynamic' and choose the field from the command object above as the 'value' field.
    This will remove the calendar date picker and instead you'll need to choose the value from the drop-down. The drop-down will always get the first day of last month from the SQL query.
    2) Create a blank report and create a formula in the report that returns first day of last month. Insert the original report as a Subreport and link this formula field to the date prompt in the Subreport. This method will completely get rid of the prompt as the value is automatically passed to a subreport. If the existing report already contains a subreport then you can't use this method anyway.
    -Abhilash

  • IPhone doesn't show all music when I connect to network in iTunes

    Hi
    In iTunes Preferences on my Mac I've ticked the button to make all my music available over the network.
    When I use the Share option in iTunes on my iPhone it doesn't show all the music on my Mac. Is there something else I should set to make this work?
    Thanks
    Flybridge

    PUSH

  • Apple TV doesn't show main menu and cannot connect to iTunes store

    I've been using my Apple TV almost everyday for the past week and i've had it for awhile and all of the sudden it only shows the "computer" and "settings" buttons. It looks like it's connected to the internet because it has an IP address, but it still doesn't show any of the usual buttons on the main menu. When I go to test network it says "cannot connect to itunes store," and says the same when I put in my username and password. I just entered same same username and password in my itunes with no issues so I know the username and password are correct. I've restarted my apple tv a couple of times. I tried to restore it and it says "the update was not successful. The apple tv update couldn't download at this time. Try again later." Agh! I don't know what else to do! Any suggestions are appreciated!!!! Thanks!

    A reboot will reset the connection to the network, as those 2 icons are the only ones that don't require an internet connection they are the only ones that will show up in the event of such an issue.

  • SQL0904N and SQL30081N while using DB2-Connect driver

    Scenario:
    Application program : Java on Unix
    Database : DB2 on Mainframe
    Database driver : IBM's DB2 connect
    Usage : A number of connections are taken by the program and are used as long as the program is alive
    (Life time of the program is variable. It can be as long as many days -- in a sense the program acts like a daemon process that runs as long it is not stopped).
    Scenario:
    -To one of the table using a load utility, such as BMC, data is loaded
    -Database goes to copy-pending status
    -Database is started by using the following command : "START DATABASE(database name) SPACENAM(table space name) ACCESS(FORCE)"
    Doubts:
    1. What happens to the connections that the program has opened to the database?
    2. Does the database relinquish all the resources (like the sockets it would have opened for the communication with the driver) held by it during restarting?
    (at least before restarting, it is evident that no query on the table in question is possible. A typical SQL0904N, which is non-availability of resources, is thrown)
    3. Can the above scenario cause a SQL30081N, which is resetting of connection by peer i.e. database in this case?

    Yes, there is a high probability for such things, you may want to consider using a connection pool instead of opening 2 connections once at the start of the program and using them all for days.
    Have a look at the following link to get an idea on how to implement a simple connection pool.
    http://developer.java.sun.com/developer/onlineTraining/Programming/JDCBook/conpool.html

  • FMLE doesn't show video/audio using datavideo

    Hi there!
    I've been trying to use my datavideo DAC-2 converter to do some live stream. Other softwares like Nero Recorder recognize the device and catch the signal, but FMLE doesn't.. I'm using Windows 7 with Firewire.
    Thanks for your advice!
    Haglee
    UPDATE: FMLE recognizes the device as DV Camera, but no signal is given..

    Here's what I discovered. I'm sure it's unique to my setup and situation but anyway here it is . . .
    I'm on a MacBook Pro OSX 10.6.1 and using iTunes 9.0.2. Videos would only play audio. I'm a photographer so often hook up my MacBook to an Apple LED Cinema Display to work on photos. When I click on the movie or TV show I want to watch without the display attached I only get audio. Once I hooked up the LED display to my MacBook the video window appears in the LED display but not on my MacBook. I just slid the window back to my MacBook Pro screen and now I can view all my movies and videos on my MacBook as before. Problem solved for me.
    Maybe the video window is playing outside the display screen border of your computer. Maybe it's something else altogether. Good Luck.

  • Net Price showing zero while using BAPI_PO_CREATE1 for me21n

    Dear All,
    I am using BAPI_PO_CREATE1 for ME21N. The problem is, after execution of the program the error msg it shows-
    No instance of object type PurchaseOrder has been created. External reference:
    Purchase order still contains faulty items
    Net price must be greater than 0
    The values are coming from excel file.
    Please tell me where I am doing wrong.
    With regards,
    Rosaline.

    Hi,
    Symptom
    You create a purchase order with BAPI_PO_CREATE1 or you add an item to an existing purchase order with BAPI_PO_CHANGE. You assign a value in field POITEM-NET_PRICE. However, this value is not transferred. If it was not possible for you to determine any conditions, the system generated the error message 06218 'Net price must be greater than 0'.
    Other terms
    BAPI_PO_CREATE1, BAPI_PO_CHANGE, price, net price, gross price, conditions, price determination, condition type, 06218, EKPO-NETPR, NETPR, POITEM-NET_PRICE, NET_PRICE, PO_PRICE, BAPI_PO_PRICE, BUS2012, PurchaseOrder.CreateFromData1, CreateFromData1, PurchaeOrder.Change
    Reason and Prerequisites
    This function has not been available up to now. You could also assign conditions via the condition tables.
    Read also Notes 399791, 428621, 529287, 578253 and 539950 for this.
    Solution
    The present note adds field PO_PRICE to table POITEM. PO_PRICE can have the values ' ', '1' or '2' with the following meaning:
        PO_PRICE = ' ': The price determination is carried out as before.
        PO_PRICE = '1': The value assigned in field NET_PRICE is transferred as a gross price, that is it is set in the condition type that is defined as a base price in the calculation schema. All other condition types remain unchanged. No conditions are copied from the last document.
        PO_PRICE = '2': The value assigned in field NET_PRICE is transferred as a net price, that is it is set in the condition type that is defined as base price in the calculation scheme. All other condition types are deleted.
    Note the following
    The following restrictions apply to field PO_PRICE:
        If you assign conditions via the BAPI interface, these are always transferred. This is carried out independently of the value that you assign in field PO_PRICE.
        If you add a new item to a purchase order with BAPI_PO_CHANGE, it does not suffice to fill field POITEM-NET_PRICE on item level. The corresponding currency must be specified explicitly on header level.
        You can only use field PO_PRICE during the creation of a purchase order item. If you want to change the price of an already existing item, you can only do this via the conditions.
        If you fill field POITEM-PO_PRICE, you must enter an 'X' in POITEMX-PO_PRICE so that the value is transferred.
    Correction
    The correction is made available via R/3 support package. If you want to implement the note manually, proceed as follows:
        1. Make sure that your system contains Notes 494759, 552189 and 578253.
        2. Create data type BAPI_PO_PRICE with the following attributes:
                        Short text:
                           Price transfer indicator: 1  = gross, 2 = net
                        Package: ME
                        Domain: BPUEB
        3. Extend structure BAPIMEPOITEM (directly after NO_ROUNDING):
                        Component: PO_PRICE
                        Component type: BAPI_PO_PRICE
        4. Extend structure BAPIMEPOITEMX (directly after NO_ROUNDING):
                        Component: PO_PRICE
                        Component type: BAPIUPDATE
        5. Extend structure MEPOITEM_DATA (directly after NO_ROUNDING):
                        Component: PO_PRICE
                        Component type: BAPI_PO_PRICE
        6. Extend structure MEPOITEM_DATAX (directly after NO_ROUNDING):
                        Component: PO_PRICE
                        Component type: BAPIUPDATE
        7. Implement the correction instructions in your system.
    regards,
    Ravi
    Edited by: Parupelly on Dec 14, 2011 1:30 PM

  • External drive doesn't show volume when used internally (and vv)

    I have an early 2011 MBP 17" where I have replaced the optical drive with the 750G hard drive that came with the computer. in the hard drive spot I put in an SSD. Recently I got a 1T 2.5" drive and I want to copy all the files from the internal 750G to the 1T and then put the 1T in the optical drive bay to replace the 750G.
    I got everything copied to the 1T drive via USB - i put the drive in a USB 3.0 enclosure that I've used before with this machine. everything copied fine. so i swapped out the 750G for the 1T in the laptop. when I booted up, the drive did now show in the finder. in Disk Utility it shows up as a device and the indented volume is a greyed out and showing a system volume designation (something like disk3d or whatever the OS uses for this [I didn't make note of the specific volume name]). when I put the disk back in the USB enclosure, it worked fine.
    So i formatted the 1T in the macbook, interally, and it works fine that way. but when I put the 750G in the external enclosure, thinking I could copy the files that way [external to internal]) - the 750G does the same thing: the device shows up ok in Disk Utility but the volume is grey and shows as an OS volume name. like the 1T I am not able to mount it or do anything other than format it.
    So I am at a loss. why can I not copy files to an external drive and put that in the machine internally? this is the way I've done this kind of thing over the years. this is the first time I am doing this with the MBP. what can I do in order to get this to work so I can get all the files on the 750G onto the 1T and work in my MBP?
    I know I can leave the 750G in the computer, connect a drive and copy it all over to it. then put the 1T in the computer and copy all the files off the external drive to the 1T. likely this would work. however a) i don't have a large enough external drive to do this with and b) i'd like to understand what is going on here and solve it as i may need to do this in the future.
    any ideas?
    thanks!

    How did you backup your internal hard drive to the external?  In order to boot a Macintosh has to be partitioned using the GUID scheme and then formatted as Mac OS extended Journaled. Both operations are performed in Disk Utility. You can clone your drive to to the external using a utility such as Carbon Copy Cloner or Super Duper. I'm not sure what you expect to accomplish without install discs. When you clone a drive you're making an exact copy. You shoud probably look at calling Apple and requesting a set of original discs or purchase a full install of Snow Leopard at http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • Preview doesn't show images, while Acrobat does

    I have a pdf file that has many images.  on Preview, it only shows black outline where the image should be, but the image itself is blank.
    but when I open the same document using Acrobat, the image appears.
    any idea why this is happening? 

    THis is a real stab in the dark, but at the top of the "next column" there is a small grey arrowhead next to the word "preview" which, if clicked, will rotate to two different positions. One position shows a preview, the other rotated position does not show the preview.
    Try clicking on the arrow.

  • Recording views to show later while using google earth. Thank You.

    Can I video record to SD, or thumb drv map views when using google earth to show later where there is no net connection.
    I want to record, and show an old guy what his mountain property looks like from the air via his TV which has USB & RCA video in.
    There is no net available where he is convelsing.
    OS= Win 7 Home Priemium.
    or; XP pro 3.
    Thank You for all your programs.
    David Braddy

    Try to download google earth software then go to area you want it to be offline and done

Maybe you are looking for