RDP iOS connection problem

Hello!
I cannot get rid of 0x03000008 error while connecting my iPad to the PC running Win 10 Pro (the same issue was with Win 8 Pro). Android phone 4g connection is going well, but I need larger screen. iPad connection through local wi-fi network is also going
well, however, 4g connection, provided by the above-mentioned Android phone to the iPad, returns 0x03000008 error.
The fix, proposed by your specialists (http://blog.thesysadmins.co.uk/remote-desktop-ios-8-1-0-error-0x03000008.html) is not applicable to my PC since it is not running server OS.
What I've done: bought public IP, forwarded RDP port, allowed users to connect through the RDP, enabled RDP connection in firewall.
How can I fix the connection?
Thanks in advance.

Hi,
Do you have any security application installed on the Windows 7 machines? If so, please temporary disable it and try again.
Meanwhile, would you please provide us the log file after you reproduce the issue for further research.
Settings -> Send log via email -> Post the log here,
Thanks.
Jeremy Wu
TechNet Community Support

Similar Messages

ACE: RDP loadbalancing connection problem

I have a problem setting up RDP loadbalancing.
My setup is a WS-C6509-E with IOS 12.2(33)SXI5 and a ACE20-MOD-K9 running
A2(3.3).
I have the ACE in two-arm-mode, I can connect to the real servers via RDP. The
real servers use a MS Terminal Server Session Broker with routing tokens.
The serverfarm is operational:
# show serverfarm FARM-TSFARM1 det
serverfarm     : FARM-TSFARM1, type: HOST
total rservers : 4
active rservers: 4
description    : srv-f1-tsX.mydomain.de
state          : ACTIVE
predictor      : ROUNDROBIN
failaction     : -
back-inservice    : 0
partial-threshold : 0
num times failover       : 0
num times back inservice : 1
total conn-dropcount : 0
                                                ----------connections-----------
       real                  weight state        current    total      failures
   ---+---------------------+------+------------+----------+----------+---------
   rserver: RS-SRV-F1-TS1
       10.7.43.201:0         8      OPERATIONAL 0          1          0
         description          : -
         max-conns            : 500       , out-of-rotation count : 0
         min-conns            : 500
         conn-rate-limit      : -         , out-of-rotation count : -
         bandwidth-rate-limit : -         , out-of-rotation count : -
         retcode out-of-rotation count : -
         load value           : 0
   rserver: RS-SRV-F1-TS2
       10.7.43.202:0         8      OPERATIONAL 0          0          0
         description          : -
         max-conns            : 500       , out-of-rotation count : 0
         min-conns            : 500
         conn-rate-limit      : -         , out-of-rotation count : -
         bandwidth-rate-limit : -         , out-of-rotation count : -
         retcode out-of-rotation count : -
         load value           : 0
   rserver: RS-SRV-F1-TS3
       10.7.43.203:0         8      OPERATIONAL 0          0          0
         description          : -
         max-conns            : 500       , out-of-rotation count : 0
         min-conns            : 500
         conn-rate-limit      : -         , out-of-rotation count : -
         bandwidth-rate-limit : -         , out-of-rotation count : -
         retcode out-of-rotation count : -
         load value           : 0
   rserver: RS-SRV-F1-TS4
       10.7.43.204:0         8      OPERATIONAL 0          0          0
         description          : -
         max-conns            : 500       , out-of-rotation count : 0
         min-conns            : 500
         conn-rate-limit      : -         , out-of-rotation count : -
         bandwidth-rate-limit : -         , out-of-rotation count : -
         retcode out-of-rotation count : -
         load value           : 0
The service policy is active, it shows an increasing hit count for the VIP
connections (47 as shown below), no drop-count, no dropped connections, but
zero bytes server packets and no hit counts for the L7 policy:
# show service-policy VIP-TSFARM1 detail
Status     : ACTIVE
Description: -----------------------------------------
Interface: vlan 44
service-policy: VIP-TSFARM1
    class: VIP-TSFARM1-RDP
     VIP Address:    Protocol: Port:
     10.7.44.106     tcp        eq    3389
      loadbalance:
        L7 loadbalance policy: VIP-TSFARM1-RDP-l7slb
        VIP Route Metric     : 77
        VIP Route Advertise : ENABLED-WHEN-ACTIVE
        VIP ICMP Reply       : ENABLED-WHEN-ACTIVE
        VIP State: INSERVICE
        curr conns       : 0         , hit count        : 47
        dropped conns    : 0
        client pkt count : 221       , client byte count: 10996
        server pkt count : 0         , server byte count: 0
        conn-rate-limit      : 0         , drop-count : 0
        bandwidth-rate-limit : 0         , drop-count : 0
        L7 Loadbalance policy : VIP-TSFARM1-RDP-l7slb
          class/match : class-default
            LB action: :
               primary serverfarm: FARM-TSFARM1
                    state: UP
                  backup serverfarm : -
            hit count        : 0
            dropped conns    : 0
I never get a "Built TCP connection" syslog message.
When I make a VIP with "policy-map type loadbalance generic" instead of
"policy-map type loadbalance rdp" everything works as expected, apart from the
fact that users cannot be redirected to the correct server if they have an
active session on one of them.
Here is the config of the rdp setup:
rserver host RS-SRV-F1-TS1
description srv-f1-ts1.mydomain.de
ip address 10.7.43.201
conn-limit max 500 min 500
rate-limit connection 10000
rate-limit bandwidth 12500000
probe PING_PROBE
inservice
rserver host RS-SRV-F1-TS2
description srv-f1-ts2.mydomain.de
ip address 10.7.43.202
conn-limit max 500 min 500
probe PING_PROBE
inservice
rserver host RS-SRV-F1-TS3
description srv-f1-ts3.mydomain.de
ip address 10.7.43.203
conn-limit max 500 min 500
probe PING_PROBE
inservice
rserver host RS-SRV-F1-TS4
description srv-f1-ts4.mydomain.de
ip address 10.7.43.204
conn-limit max 500 min 500
probe PING_PROBE
inservice
serverfarm host FARM-TSFARM1
description srv-f1-tsX.mydomain.de
rserver RS-SRV-F1-TS1
    inservice
rserver RS-SRV-F1-TS2
    inservice
rserver RS-SRV-F1-TS3
    inservice
rserver RS-SRV-F1-TS4
    inservice
class-map match-all VIP-TSFARM1-RDP
2 match virtual-address 10.7.44.106 tcp eq 3389
policy-map type loadbalance rdp first-match VIP-TSFARM1-RDP-l7slb
class class-default
    serverfarm FARM-TSFARM1
policy-map multi-match VIP-TSFARM1
class VIP-TSFARM1-RDP
    loadbalance vip inservice
    loadbalance policy VIP-TSFARM1-RDP-l7slb
    loadbalance vip icmp-reply active
    loadbalance vip advertise active
interface vlan 44
service-policy input VIP-TSFARM1
Any ideas?

Ralf,
You are running into the following defect:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtl63354
Workaround:
use a layer 4 loadbalance policy and configure source ip sticky.
Joel Lamousnery
Cisco TAC

TS1538 my ipad can not continue to download ios 6.1.2 because of connection problem and it is stuck in connect to itunes image, i cant open it anymore..what should i do? help plz

my ipad can not continue to download ios 6.1.2 because of connection problem and it is stuck in connect to itunes image, i cant open it anymore..what should i do? help plz

Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

Hi
I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
Would you please help me out? I would really appreciate it.

Hi..
Restart your router then restart the iPhone to test.
If that doesn't help, try this support article > iOS: Troubleshooting Wi-Fi networks and connections

Who can shed some light on my ongoing connection problem. After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet. I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to

Who can shed some light on my ongoing connection problem.
After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
I tried all things of resets and forgets. No result.
I have been fondling with my Airport Extreme 5 , but that did not help much.
This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
Ideas anyone ?

Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden

After upgrade to ios 6 usb connection problems with car stereo

Hi Everyone,
after ios upgrade to ios6 i am not further able to use the iPhone 4s as music device - having usb connection problems ("not readable"). I am sure, that the upgrade ist the culprit; worked fine before. My car stereo is built in a Volvo XC 60; the device is connected via the standard usb cable by apple.
Any Ideas?
Thanks
Ivo

(same problem thread): see also https://discussions.apple.com/message/20185146#20185146 (not fixed)

Wireless connectivity problems using IOS 6.0.2?

After installing IOS 6.0.2 on my iPhone 5 I can no longer connect to known wireless sites. I've been through troubleshooting with both Apple and my ISP and no luck. I'm thinking there's wireless connectivity problems with this latest update (my iPad 3 is still running 6.0.1 and is fine on my wireless network). Are others having this issue as well?

I am not guaranteeing this fix , but it worked for me , so far. I have an iphone 5 and it had ios 6.0.1 . Worked fine. Upgraded to 6.0.2 and it wouldn't connect with home router most of the time. My son in law an IT guy for the Government came up with a solution. The problem seemed most likely with routers that are bought and not configured and retain the original factory settings. Therefore my phone considers my home network a generic one and I have to manually connect to it. To distinguish the network we did the following.
1) went to settings on my iphone
2) choose "my home network" by pushing the arrow on the right
3) This brought up the network info page. (it says "forget this network " at the top)
4)DHCP will probably be highlighted.
5) touch "static"
6) This will bring up the manual settings
7) We entered the following.
For Ip Address 192.168.1.15
Subnet Mask 255.255.255.0
Router 192.168.1.1
DNS 4.2.2.1,4.2.2.2,8.8.8.8
Leave the HTTP Proxy to off
This will assign a static Ip address not a dynamic one and should work.
If it doesn't , go back to step 3 and select DHCP and return to the dynamic state .

ITunes cannot connect with this iPad Error/iOS 5 problem

It appears that ever since upgrading to iOS 5 and opting to sync my first gen iPad wirelessly, I have been receiving an error message each morning stating "iTunes cannot connect with this iPad..."
The wireless sync capability works fine, I plug my iPad into the wall when I come home, and it starts pushing and pulling all the new apps that I've downloaded in the day.
It appears that iTunes is will regularly try to connect with the iPad while it is charging. At some point during the evenings, either my iPad will be asleep or my iMac will be asleep. I think this is where the connection problem is arising.
Does anyone know how to change iTunes' frequency of wireless sync to a device that it is wirelessly connected to? Ideally, I'd like it to only sync wirelessly once when I plug the iPad into the wall.

See if this page helps : http://support.apple.com/kb/TS3221

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael

Remote desktop connection problem windows 8

Hi everybody,
I hope you can help us. We run a software package that uses a remote desktop connection. When the program is minimised for more than a couple of minutes, the connection disconnects and takes a while to reconnect. We've been in touch with the guys that run
the program and they've said that there's no problem on their end and that it must be on our end. It's happening with all three computers at one location and it's not happening with our two computers in our other location.
I've been in touch with the online support guys in microsoft and they couldn't help. So I'm wondering if any of you can help us (in laymans terms please!).
All our computers run Windows 8.
Thanks in advance.

Hi,
Thank you for your posting in Windows Server Forum.
Yes, you can check with 2 different settings. 1) By Collection properties (Server 2012\R2) and RDP-Tcp connection under Remote Desktop Service Manager (Server 2008 R2). 2) The other setting is related to GPO (Set time
limit for active but idle Remote Desktop Services sessions) as following path.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
You can check below link (Configuration 1) for more information.
[Forum FAQ] Restrict number of Active Sessions in RDS 2012 and 2012 R2
http://social.technet.microsoft.com/Forums/en-US/00c2252b-8ec0-489f-8da2-07a434a9b5a2/forum-faq-restrict-number-of-active-sessions-in-rds-2012-and-2012-r2?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

IPad 2 Wi-fi connection problems

I am lately encountering this problem with my internet wi-fi connection. It keeps dropping the signal. When I go to Settings to re-connect, it demands the password everytime. After entering the password, every single time there is the message: "Failure to connect" and on the second re-try it works. When I come home after work, the iPad does not automatically connects to the wi-fi. I have to connect it myself everyday then enter the password again and again.
After the connection, I can use my apps that require the internet (until the signal drops again) but there are no notifications from my apps. At the same time, I connected to the 3G internet and all my notifications appeared which were supposed to appear when I connected to the wi-fi. I have the iPad on recharge every night. The next morning when I check my notifications, most of them appeared at the same time (when the wi-fi was working fine). For example, I had a game update that such and such thing is ready 46 minutes ago when it should have been 3 hours before.
Someone suggested to try the "Forget this network" but there is no improvement.
To fix this, I have tried to restart the iPad. I have reset the network settings. Nothing helps
In short,
1) I have to enter password every time I connect
2) Signal keeps dropping
3) The notifications don't appear all the time from the internet apps. The real time notifications come intermittently or when I connect to 3G, they come instantly.

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

IPad WiFi Connection Problems - WiFi Symbol Appears With Full Bars but I Don't Get A Checkmark?

I was using the iPad one day and then all of a sudden it stopped connecting to the internet. The network at this hotel is very good and I've asked them about their router so it is not the router's problem.
I go to the Settings and tap on Wi-Fi then I tap on the hotel network. After a few seconds, it says the network name beside the Wi-Fi tab and it gives me the WiFi symbol showing 3 bars. But then I never get the checkmark or tick saying everything is connected. I try going online and it says the iPad is not connected to the internet. I've tried an iPhone and it connected and got a checkmark in a few seconds. I've talked to the front desk and he took out his phone and showed me that he could connect, he even opened a page without any problems at all.
I've been trying to find a solution for this for a long time. I've been searching Google over and over again. I turned Airplane Mode on for 1 minute, I've tried Resetting my Network settings, I've tried forgetting the network and reconnecting again, I've tried removing all restrictions from the iPad, I've rebooted the iPad A LOT, etc.
So this is my problem for people who don't want to read the whole message:
1. I can't connect to the internet with the iPad
2. It shows the WiFi symbol saying its connected but I never get the checkmark or tick.
3. It's not the router problem.
4. I've tried other networks and it doesn't work. It just keeps on showing that loading circle right beside the network name.
5. Do any of you know what this problem is? Or do you have a solution?
Thank you for reading this and have a great day

Since you are in a hotel, some of these are not applicable.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Unable to connect via RDP 5.2 when multiple RDP-TCP connection setup with NLA disable

Hi All,
Need help urgently, I had setup a multiple RDP-TCP connection for separate RDP connection with different IP.
Problem I face after setting up multiple RDP-TCP connection, the old version of RDP 5.2 non longer working even with NLA disable. RDP 6 and above no problem connecting to the RDP session.
Error message on RDP 5.2 shown as:
"Because of security error, the client could not connect to the remote computer. Verify that you are logged on the network, and then try connection again."

Hi,
Please try the steps in the article below and see how it works.
Because of a security error, the client could not connect to the Terminal Server
http://support.microsoft.com/kb/329896
Thanks.
Jeremy Wu
TechNet Community Support

Connectivity problems on ATM MPLS network

We have implemented a country wide MPLS network based on 8500 platforms. We have encountered some strange connectivity problems between some PE's. Without apparent reason connectivity is lost between some PEs and restored after some time. The global routing table is perfectly stable among all the routers on the path between respective PE's. Also the LVC's & TAGs are stable and practically we were unable to find any change between the working and not working state. As a curious thing, during the outage (minutes) clearing routes into a PE VRF was restoring connectivity on the respective VRF and all other VRFs on the respective PE also!
Has enyone seeing similar problems before?
PE routers are 3660 series and we've tried all IOS available on CCO.

Have you made any provisioning (upgrading connectivity) bet the PEs and Ps....I suffer such a similar problem with our network PEs and I notice that this happen after provisioning links between our PEs (RPMs in MGX 8850) and the ATM LSR (BPX 8600).
when i issue "clear ip route vrf *" or reload the RPM.....all the VRFs operate normally again.....so I get used to such a problem after any network provisioning process but still i couldn't relate this to problems with VRFs.

TS1398 Connection problems with iPad 2

I have an iPad 2. It connected with my wi-fi network for weeks without a problem but now will not connect at all. It always comes up with "unable to connect with "name of router/Wi-Fi""
The iPad connects well with other networks and my friends ipad connects well with my network, so the network is not a problem. It is just my iPad2 with my network. I have reset the router and the iPad. I have tried everything I can think of. Re-entered the network with checked settings (that work on my friends iPad 3) Updated all the softwear as neccessary Any help would be gratefully appreciated as even going in to our local Apple dealer did not get me anywhere, they connected instantly with their network.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

RDP iOS connection problem

Similar Messages

Maybe you are looking for