RDS Cal Licenses not recognized

Available and Issued should add up to 10, but is instead showing 0 available, 0 issued, and using “Built-in-overused” instead of the legitimate CAL.
This causes an error in the licensing diagnose:
Screenshot will not post until "verify your account" but no instructions about how to accomplish this.

Dharmesh, this is a single machine for a Proof Of Concept application, therefore the licensing server and RD session host are on the same machine. Though it is part of the domain, the Group Policy for RD Licensing is in
the default “not defined” state. This should not be an issue, as quoted from your link (emphasis added):
“If you disable or do not configure the License server security group policy setting, the Terminal Server Computers group is not deleted or changed and
the license server issues an RDS CAL (if an appropriate RDS CAL is available)
to any RD Session Host server that requests one.”
With no changes to GPO defaults, the licensing server should issue CALs to itself without issue. In fact, CAL’s are being issued, they’re just being issued from the built-in overuse account instead of from the purchased
license.
TP, this is 2012 R2. licmgr.exe displays the following:
License Version and Type / License Program / Total Licenses / Available / Issued / Expiry Date / Keypack ID
Windows 200 Server – Built-in TS Per Device CAL / Built-in / Unlimited / Unlimited / 0 / Never / 2
Windows Server 2012 – Installed RDS Per User Cal / Built-in OverUsed / 0 / 0 / 8 / Never / 4
Windows Server 2012 – Installed RDS Per User Cal / Retail Purchase / 10 / 0 / 0 / Never / 3
This agrees with the raw numbers (10/8) listed in the results of the CAL usage report below, the report isn’t too helpful as it doesn’t note which CAL is being used (as above), which is the problem:
CAL Usage Report
RD License Server:,"MYSERVER"
Report Date:,"Tuesday, February 4, 2014 4:50:31 PM"
CAL Version,CAL Type,Installed CALs,CALs in Use,CAL Availability
Windows Server 2012,RDS Per User CAL,10,8,Limited
Successful Per User License Issuance Detail
Issued to User,CAL Version,CAL Type,Expires On
MyDomain.com\LocalAdmin,Windows Server 2012,RDS Per User CAL,"Sunday, March 30, 2014 7:32:02 PM"
MyDomain.com\EnterpriseAdminUser,Windows Server 2012,RDS Per User CAL,"Sunday, March 30, 2014 7:44:42 PM"
MyDomain.com\DomainAdmin,Windows Server 2012,RDS Per User CAL,"Sunday, March 30, 2014 10:03:55 PM"
MyDomain.com\PowerUser,Windows Server 2012,RDS Per User CAL,"Sunday, March 30, 2014 11:15:10 PM"
MyDomain.com\NormalUser1,Windows Server 2012,RDS Per User CAL,"Monday, March 31, 2014 11:32:33 PM"
MyDomain.com\NormalUser2,Windows Server 2012,RDS Per User CAL,"Tuesday, April 1, 2014 6:36:22 PM"
MyDomain.com\NormalUser3,Windows Server 2012,RDS Per User CAL,"Saturday, April 5, 2014 3:22:40 AM"
MyDomain.com\NormalUser4,Windows Server 2012,RDS Per User CAL,"Saturday, April 5, 2014 8:54:29 PM"
No Per User License Issuance has failed
No Per Device License has been issued

Similar Messages

Can we use Windows Server 2012 RDS CAL license in RDS 2008 R2 Server

Respected Sir,
We have RDS Server 2012 CAL license select plus but we want to use Windows Server 2008 R2 RDS so is it possible to use 2012 RDS license in RDS 2008 Server?
if yes how can put this.
Waiting for your reply.
thanks,
Hiren Patel
+91 9974091230

Hi,
RDS 2012 CALs can license 2008 R2 and 2008 session hosts. However, RDS 2012 CALs only can be installed on the 2012 Licensing server.
RDS and TS CAL Interoperability Matrix
http://social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support

Netweaver Developer Subscription digital license not recognized

Hello,
I obtained from SMP and installed a permanent license for my Netweaver SR3 system. It shows up in the "New Licenses" table of the SLICENSE screen as "valid" and with an expiration date of next September. Yet the system is not recognizing it and will not fully start up. Only the SAP* user can log on. I have tried deleting it and requesting another one from SMP but it made no difference. The command line utility "saplicense" also can not find the new license.The license check was working fine earlier under the temporary license which showed up in SLICENSE under "Old Licenses". Do I need to do something different to tell the system to look for a new digital license instead? Is there a way to get a trace showing exactly why the license check is failing? Any help would be appreciated,
Thanks
-Chris

Chris,
I have not seen this before. Maybe MaxDB license related defect
Looks at the end of this:
Logon not possible(error in license check)
If no one suggest anything better, open OSS message with SAP.
Sorry I cannot be of any more help at the moment.
Regards,
Slava

RDS CAL License

Hi
We have below mentioned license with us and can we use this license for RDS CAL or do we need any additional license for RDS?
Line Items
Product Description:Microsoft® Windows® Server CAL 2012 Sngl OPEN 1
License Level
C Device CAL Device CAL
Microsoft Part Number :R18-04276 ,
Version : 2012 Quantity:
200

Hi Shivaji,
How is everything going? Could you please tell us the present situation? If you need any further assistance, please let us know.
Thanks.
Dharmesh Solanki
TechNet Community Support

RDS Cal licenses

I am looking for 150 licenses for 2008 RDS CAL. I need to know is it possible to install this 150 licenses in a single server. Is
there any limit for the sessions
Anwar

As Bharat Said, there are no limitations,
Please go through this microsoft for more information.
http://technet.microsoft.com/en-us/library/cc725933.aspx

Activation based license not recognized by Virtual Machine (Vivado 2014.4)

Hi,
I am using an VirtualBox to host a Ubuntu 64-bit Linux machine. And I have a Vivado node-locked license. In the first time, when I tried to generate license and used it with the machine, everything went well. But then I returned the license back to Xilinx, so that I can generate the license again for any other machine.
Then, the time comes to me that I need to use my Linux VM again. After generating the "Xilinx_license.xml" file via the Xilinx licensing website, the VLM refuses the license with the message:
Then I tried using command prompt to process the license, but I got the foolowing output:
di@di-VirtualBox:~$ xlicclientmgr -p ~/Downloads/Xilinx_License.xml
ERROR: API function 60009 failed, result 51308
Request generated on a different machine
Response processing failed.
The response is not valid for this machine.
Exit(4) error when processing response.
So I am now stuck in a state that I have a license generated, but I cannot use it, and I also cannot return it back to Xilinx. I need some help from Xilixn technical support.
A list of my questions:
- what did I do wrong so that such an error occurs? ( I was able to use my VM and Vivado without any problem for the first time)
- how to make VLM recognize this license again?
- is there anyway to get myself out of the stuck-with-the-license state?
Many thanks in advance.
Regards,
Di Cao

Hi ,
The Virtual Machine has never been removed or changed.
I merely returned the Xilinx license that was once assigned to this Virtual Machine some days ago, and today I tried to generate a license again for the same Virtual Machine.
Somehow the VLM does not recognize the license.xml at all, and I am now stuck with this license that can neither be recognized nor be returned.
Is it possible to un-do the current generated license and allow the Xilinx licensing site to generate a new license again?
Regards,
Di

RDS CAL License Conversion

Hello,
We have a customer who is running remote desktop services with ~500 "User based" client access licenses. As part of capacity planning, the customer have procured an additional ~500 "Device based" client access licenses. The environment
is requrired to have all User Based CAL ONLY. Is there a provision to get the new Device based CAL converted into User based CAL? If yes, please let me know the procedure.
Any help would be greatly appreciated!
NOTE: We do not have an active SA agreement with Microsoft.
Thanks,
Koushik

The only way to do this would be through your licence reseller or through Microsoft clearing house. But AFAIK they don't allow this to happen.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
Blog: http://www.windows-support.co.uk
Twitter: LinkedIn:

Maintenance License not recognized by SPAM/SAINT

Brand new installation. Generated keys. Imported using SLICENSE. I show a valid Maintenance License but when going into SPAM/SAINT I get an error saying it is not valid.
I go to SDCCN and try to create a "Maintenace Package" task and get "No action possible" message.
The hardware keys match.
SAP Note 1280664 says to make sure that SM_<SID>CLNT<CLIENT>_BACK is available and working. This RFC is not in the system at all.
GoTo > Settings > Task-specific brings up nothing at all.
Does this connection have to be set up manually? or am I missing a major step somewhere?

Hello Jeff,
Please make sure that the maintenance certificate has been installed via t code SLICENCE manually.
If this has been done, please follow the below steps.
Please review the note Number 763561
& follow the below steps:
5. Q: When trying to create a task in SDCCN an error message appears:
    ' No action possible '. Why can the task not be created?
    A: SDCCN has not yet been initialised correctly, and so the customizing for the tasks has not been filled yet.
    SDCCN can be initialised locally by following these steps:
o Ensure that the task processor job is deactivated, via SDCCN -> Goto -> Settings -> Task processor
o Then initialize the tool via SDCCN ->Utilities -> Activate.
o If the initialize was succesful you should get the following messages:
Local initialization of new Service Data Control Center
   Activation successful
   Destination to SAP created
   AUTO_SESSION_MANAGER descheduled
   Settings filled
   Service Data Control Manager tasks created
   Task processor scheduled
   Jobname                        /BDL/TASK_PROCESSOR
Please try to fix the problem by deactivating the task processor (deleting any still open jobs called /BDL/TASK_PROCESSOR) and then reactivating SDCCN via Utilities -> Activate. If that doesn't help, please open the system and supply user & password so that I may look at the problem in the systems.
If none of these fit you, please ensure that you have a maintenance certificate which should be installed via transaction slicense. Has this already been done? If not, please log a message for SAP on component SV-SMG-LIC and request for the maintenance certificate.
Hope this helps.
Thanks,
Mark

Using Windows Server 2012 per-User RDS CAL on Server 2008 R2 Session Host

I have a Remote Desktop Licensing Server setup on my domain controller running Windows Server 2012 R2. I have installed a
’Windows Server 2012 Remote Desktop Services per-User CAL’ there and activated the licensing server already.
Currently I use ONLY Windows Server 2008 R2 machines as RDS Session Hosts (in the future I plan to transition them to 2012 R2, hence the CAL I bought is
already in the newest version).
I have already configured my WS 2008 RDS Session Hosts: set
Per-User licensing mode and specified license server address. The connectivity between my Session Host(s) and my License Server seems to be ok as the
Remote Desktop Session Host Configuration window on the Session Host correctly lists the 2012 per-user
license (CAL installed on server) from the license server.
On the License Server I can also see event logs entries (in
Microsoft-Windows-TerminalServices-Licensing/Admin), indicating that the user has been issued a license.
The issue I am having is that the license being issued is
2008 Per User CAL license (Build-in OverUsed - temporary) and not the 2012 Per User CAL license which is the only license installed on the server. According to the RDS CAL interoperability matrix at
social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx, I was expecting the 2012 license to be backward-compatible with 2008 client (and that
in the absence of legacy licenses, the (only) 2012 license would be used for all clients connecting to the licensing server)
Before I bought my license, I found this document:
download.microsoft.com/download/3/D/4/3D42BDC2-6725-4B29-B75A-A5B04179958B/WindowsServerRDS_VLBrief.pdf
which says that - "newer version RDS CALs can be used with an older version of the server software" (In section FAQ, Q4), which means to me that
the 2012 license would work as-is for the 2008 Server and gives me flexibility when upgrading to the new server version.
How can I make this CAL work in my environment?
Note:
I have already explicitly disabled
Prevent license upgrade Group Policy setting which I assumed would fix the issue but nothing has changed.
Then I have enabled License server security group Group Polity setting
and added computers from my domain to RDS Endpoint Servers AD group. I have also created new AD group called
Terminal Server Computers and added the computer accounts there, but it changes
nothing. Reference - technet.microsoft.com/en-us/library/ee791761.aspx , technet.microsoft.com/en-us/library/cc725704.aspx and blogs.msdn.com/b/rds/archive/2009/09/17/control-the-issuance-of-rds-cals.aspx.
I found one potential ‘workaround’ which involved manually downgrading my CAL license by calling
Microsoft Clearinghouse. I am very reluctant do to so because, as I upgrade parts of my infrastructure to Server 2012, I’d need to then ask Microsoft to manually upgrade a part of my license back as well.
Am I missing something? What should I do to get my 2012 CAL to be issued to 2008 R2 server

Hi, I have tried several other possibilities.
I change expire date for my temporary assigned license (2008 CAL overused). It can be done, by changing Active Directory user properties – msTSExpireDate. When I restart my Session Host server and logged again, my license was renewed
for next 60 days (event ID - 4145).
I also delete information about license for this user (clear msTSExpireDate and msTSLicenseVersion). And the license was successfully removed from License Manager. After another SH restart it gets the same – 2008 overused – license
(event ID 4143 - license server has successfully issued …)
I now, that changing info in AD attributes is a little trick, and this is not a real value - only a reference, but it was useful to delete or change expiration date of license. But it didn’t change type of license as I expected.
Reference -
http://discussions.citrix.com/topic/243320-windows-2008-licensing-questions/
To TP:
I have found your post with information:
If you have a Server 2012 RD Licensing server you may install your 2012 RDS CALs on it (no downgrade necessary) and then set your Server 2008 R2 RDSH to
use the 2012 RDL server. The 2012 RD Licensing server will automatically issue the CALs as 2008. -
https://social.technet.microsoft.com/Forums/windowsserver/en-US/6046ded1-96bf-4d79-89ce-38aac2a6694e/can-we-use-windows-server-2012-rds-cal-license-in-rds-2008-r2-server?forum=winserverTS
And it showing my situation in brief. I also found
similar problems, but the solutions don’t meet my expectations.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/dcfb1966-89a8-4b5d-bf5a-ff03ac0b7a66/rds-cal-licenses-not-recognized?forum=winserverTS
– “sudden all of the CALS were available”
https://social.technet.microsoft.com/Forums/windowsserver/en-US/f1228599-8452-4a3e-a263-061de14bfcfe/server-2012-rds-builtin-overused-cals-issue?forum=winserverTS
– “this should go away after a while”
Is there a way to determine this time you mentioned before? Or should I just wait patiently…

Windows Server 2012 RDS CALs on Server 2008 R2 License Server

Hi All,
Can we use Windows Server 2012 RDS CAL license in RDS 2008 R2 Server
OS:Enterprise Windows server 2008R2
Licence:Volume
Looking for forward to hear you soon
regards,
Subhash chandran

On Mon, 24 Nov 2014 10:41:21 +0000, Subhash chandran wrote:
Can we use Windows Server 2012 RDS CAL license in RDS 2008 R2 Server
This forum is only for questions related to the Windows 10 Technical
Preview/
Please repost your question to either a 2012 or a 2008 forum.
Paul Adare - FIM CM MVP
If I had it all to do over again, I'd spell creat with an "e". - Kernighan

Windows Server 2012 RDS CALS on Windows Server 2008 R2 Licensing Server

Hi,
at the moment we are installing the first couple of Windows Server 2012 in our infrastructure.
Some of them have installed RDS.
Now we are wondering whether it is possible to use our existing Windows Server 2008 R2 licensing server for serving the licenses we have (yes we to have new Windows Server 2012 RDS CALS) or whether we have to install a new host based on Windows Server 2012.
We tried to add the new license to the 2008 R2 licensing server, but it is not possible. The licensing manager's error message: "The license code contains invalid characters or not enough characters."
Is there any other way?
Thanks and regards
Matthias

Hi matt_will_fix_it,
How about Windows 2012 R2 ?
Will a Windows 2012 RD Licensing server provide licences to a Windows 2012 R2 server?
I have not tested it, but it should work. Server 2012 R2 requires the same RDS CAL version as Server 2012. If you try it and have an issue please reply back.
-TP

I am retired. In my active years, I purchased Adobe Creative Suite 4 Design Standard and Dreamweaver CS5 for my Windows environment. I recently spent a fortune to migrate to Apple. I realize that my licenses are not recognized by Adobe. I am desperate

I am retired. In my active years, I purchased Adobe Creative Suite 4 Design Standard and Dreamweaver CS5 for my Windows environment. I recently spent a fortune to migrate to Apple. I now (and a bite late) realize that my licenses are not recognized by Adobe. I am desperate. I cannot afford the expense of buying or paying access to the software and, still, I need the tools for all those little things I do for enjoyment. What can be done?

The licenses are operating system specific, so one option would be to retain use of the Windows machine you had before the Mac.
If you want to try to use the older stuff on your new Mac you can try installing Windows emulation software such as Bootcamp.

Intune: No licenses, user name not recognized and more errors

I've just activated our IUR from our Action Pack subscription.
So, I go an Intune product key for 5 users for 1 year and set it up in the Intune Portal.
So far, so good.
My domain and users from Office365 have automatically transferred to Intune as well, so that's great.
However, it seems the licenses won't activate or something.
When I look at Subscription > Manage (or something like that, it's Dutch), it says 5 licenses until Aprl 2nd 2016.
However, in Subscription > Licenses it says I don't have any licenses.
Also, when going to any other portal (company or admin), it says 'User Name not recognized'.
My main account is rowdy[A]noord-computers.nl
Is there something more I should do? Or do I just have to wait a few days?
Kind regards,
Rowdy

If you still see this problem, you should contact Microsoft support from the Intune portal.
They can help you fix this problem.
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

How to uninstall ? Remote Desktop Licensing (RDS CALs)

Hi, Support
we need to help about how to uninstall Remote Desktop Licensing (RDS CALs) without re-install OS
we using windows server 2012 R2, we tried to removed role of Remote Desktop services and re-installed role again but the old RDS licensing still running and keep warning license will expire
tried to Deactivate Server and re-install license but got the error as the picture attached
Thank you for your try to help.
Puibds.

Hi,
I cannot see the screenshot, would you please upload it again? Also, more details about the error is appreciated.
Use SkyDrive to post screen shot/picture.
http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65
Regarding the issue, the Microsoft Remote Desktop Licensing website might help you.
https://activate.microsoft.com/
Move Remote Desktop Licensing to a New Server
http://technet.microsoft.com/en-us/library/cc730776.aspx
Thanks.
Jeremy Wu
TechNet Community Support

2008 RDS user cal License moving to 2012 server

Hello ,
We have moved the 2008 RDS User Cal Volume License to the 2012 server .
In the RDS license Manager it is showing usage is showing as Zero even though users are using the service.
It is issuing the temporary license.
Does anyone have document how to follow the migrations process from 2008 RDS User Cal Volume License to the 2012 server.
please provide the resolutions.

Hi,
Please describe in more detail you current server configuration and what steps you have performed so far.
1. Are the users logging on to a Server 2008 R2 Remote Desktop Session Host (RDSH) server, or Server 2012/2012 R2 RDSH server? If the RDSH server is 2012/2012 R2 then 2012 RDS CALs are required. Additionally you need to configure the
licensing mode of the 2012 RDSH server to be Per User. From your description it sounds like it is set to Per Device. The licensing mode is set in the RDS deployment properties: Server Manager -- RDS -- Overview -- Deployment Overview -- Tasks --
Edit Deployment Properties -- RD Licensing tab.
2. If the users are logging on to a Server 2008 R2 RDSH server, did you set its licensing mode to Per User and point it to the new 2012 RD Licensing server? You can do this by logging on to the RDSH as an admin and opening RD Session Host Configuration
(tsconfig.msc) or by setting the appropriate group policy.
Thanks.
-TP

RDS Cal Licenses not recognized

Similar Messages

Maybe you are looking for