Re-Arrange columns in the workbook

Hello Friends,
I have 3 KF's.I have to display these KF for last 3 weeks.
Ex:Week 1            Week 2              Week3
KF1 KF2 KF3        KF1 KF2 KF3      KF1 KF2 KF3
Currently it is displaying like this
KF1                                       KF2                                      KF3
Week1 Wekk2 Week3       Week1 Wekk2 Week3     Week1 Wekk2 Week3
Can you let me know how to re-arrange these columns?
Thanks for your help !!!
Priya

Hi Priya,
Just swap or exchange the KF structure with the Week InfoObject.
Hope this helps...

Similar Messages

Insert a Blank Column in the Results Area of a Workbook

Is it possible to insert a blank column in the results area of a WORKBOOK that does not get affected by free characteristic drill down or refreshing of the corresponding query? The current workbook looks like follows
Column A - Characteristic1
Column B - Characteristic2
Column C - KeyFigure1
Column D - KeyFigure2
Column E - KeyFigure3
Column F - KeyFigure4
The requirement is that the user wants to enter some estimates between Column B and Column C and Column D and Column E as follows
Column A - Characteristic1
Column B - Characteristic2
Column C - USER ENTRY
Column D - KeyFigure1
Column E - KeyFigure2
Column F - USER ENTRY
Column G - KeyFigure3
Column H - KeyFigure4
Column I - CALCULATIONS BASED ON USER ENTRY
First I tried to split the results area and save the workbook. But when the query is refreshed then the entire results area gets back in one piece. I succeeded partially by having a key figure with no possible output (i.e., restricting a non-existent value on a characteristic). Again in here, whatever user inputs will get wiped out with the drill down. Does any one have any pointers? Thanks.
IS

Hi IS,
As a nearly workaround I can suppose to do the following.
Create two identical requests.
In the first one hide the columns to the right from your intended new user column. In the second one - hide columns to left.
Knowing the columns number to be shown in each request you can place both request in the same row, but in different columns taking into account that between result areas should be one (or more) additional column.
Data entered by a user will not be wiped out during query refresh or drilldown. Of course, these user data will not conform drilldown operations. So, it is not 100% solution you want.
Another possibility, very hard to implement (if feasible at all), is to write VB code that will monitor user action and will keep data entered by a user somewhere in another sheet and restore them in proper cells after user action (drilldown). But I don't think such coding worth it.
Best regards,
Eugene

The hidden columns of wrokbook will appear when refresh the workbook

Hi,expert.
I create a query,the query has 3 columns,
Fields Name: Col_A, Col_B, Col_C
Fields Value: 1001.....001 ... X
I want to connect the Col_B and Col_C, so I add a column Col_D, like this:
Fields Name: Col_A, Col_B, Col_C, Col_D
Fields Value: 1001 ... 001 .. ..X .... ..001X
and then I hidden Col_B and Col_C in the excel. save the query as a workbook.
When I open the workbook,and refresh it,the hidden Col_B and Col_C were appear.
PLZ tell me how to hide the columns Col_B and Col_C, If I refresh the workbook,they will be hidden either.
My BEX Analyzer version is BI AddOn 7.x(based on 7.10), Support package 8, Revison 1408.
TKS.
Edited by: Bruce Wang on Jul 26, 2010 11:28 AM
Edited by: Bruce Wang on Jul 26, 2010 11:29 AM

Hello Bruce,
As mentioned by others.
If it is possible, try to hide these two columns in the query designer.
If there are few calculaions need to be done in excel with these fields, then include a macro to the hide these columns.
You need to include the code to hide these columns to the exit macro 'call back'.
Hope this helps.
Regards,
Hari

Copy only one column of the workbook1 and paste it in another workbook 2

Hello Rishi. Please help me with this how to copy only one column C of the workbook1 and paste it in another workbook 2 in Column D so that When user execute workbook1 . and then execute workbook2 . Column D is automatically populated in Workbook2 based on the data in Column C in workbook 1
Please help
Thanks
Soniya

Hi Soniya
As I mentioned earlier, I haven't come across a situation of copying data from one workbook to another. However, for doing some dynamic modifications within the different sheets of the same workbook, you can refer to the following thread:
Comparing two queries with VBA macro
Thanks,
Rishi

Is there a routine one can use to shift the column of data by one each time the loop index increments? In other words, increment the columns that the data is being saved by using the index?

The device, an Ocean Optics spectrometer in columns of about 9000 cells.I'm saving this as a lvm file using the "write to measurement file.vi". But it doesn't give me the flexibility as far as I can tell.
I need to move the column by the index of the for loop, so that when i = n, the data will take up the n+1 column. (the 1st column is used for wavelength). How do I use the "write to spreadsheet file.vi" to do this? Also, if I use the "write to spreadsheet file.vi", is there a way one can increment the file name, so that the data isn't written over. I like what "write to measurement file.vi" does.
I'd really appreciate any help someone can give me. I'm a novice at this, so the greater the detail, the better. Thanks!!!

You cannot write one column at a time to a spreadsheet file, because a file is arranged linearly and adding a column would need to move (=read and rewwrite elsewhere) almost all existing elements to interlace the new data. You can only append new rows without having to touch the already written data.
Fields typically don't have fixed width. An exception would be binary files that are pre-allocated at the final size. In this case you can write columns by setting the file positions for each element. It still will be very inefficient.
What you could do is append rows until all data is written, the read, transpose, and write back the final file.
What you also could to is build the final array in a shift register and write the entire things to file at once after all data is present.
LabVIEW Champion . Do more with less code and in less time .

Problem with columns in the middle of my book

I am writing my second book with Pages 2.02 and have run into a problem with columns. I want to add a long list of items as a list with check boxes for readers to check off. If I paste in enough text for three or four pages of two columns it gets messed up in various ways - the text flows into the following text if I don't use section breaks at the end instead of layout breaks, if I use section breaks it solves that one, but if I add anything to the list it changes all the columns across the pages so that one or several of the pages has way less in the right column than in the left. So far the left column fills the entire page all the time, but the right column has lots of spaces. If I switch back and forth from one column to two, it fixes it. If I add text before the list section it messes everything up again and because there is a section break I end up with a little bit of text on the last page and a huge gap before the single column part that follows.
Does anyone know how to get reliable results that will not mess me up when adding content before the list or in the list itself?
PowerBook G4 Mac OS X (10.4.8)

Hi Cymru,
Thank you for thinking about my problems. I guess I s half asleep when I posted and it didn't make sense.
I have so far 77 pages of the book divided into several chapters via section breaks. Inside the 5th section there is almost two pages of paragraphs. Those paragraphs could become 3.75 pages or who knows how long before the list of items. The list of items is 226 items separated by carriage returns and go from one word with 5 characters to 7 words and 34 characters. It needs to be a list with check boxes before them so that the user can check off the items that apply. It is a workbook about turning bipolar into an advantage and is currently 8.5 x 11 and printed on my laser printer for now, but when completed will be more like 8 x 10, so it needs to resize without major hassles.
I have tried every combination of breaks to get the list to flow in two columns, but perhaps have not done the correct combination. I show invisibles and layout. At the end of my paragraphs I do a paragraph return. I then do either a section break or a layout break, followed by a paragraph return and another layout or section break. I then put my curser before the paragraph break, but after the first section/paragraph break, and set columns to 2, evenly divided by default with 3.2026" columns and .3375" gutter, but I want them to change with page size in the future.
Once set up, I copy the text out of BBEdit and paste into the left column. It takes up several pages because it is formatted to do double spaces, so I use one of my styles to make it bold and single spaces. I then apply list style with image bullets and one of the default box images that came with Pages. There are 5 items in each column on the first page because it is close to the bottom, but flows into the next two pages. (with text edits it might end up 20 items in each column on the first page) The second page has 39 items in each column and the last page has 8 items in the left column only, but if with section breaks take up the whole page and the next paragraphs start on the next page. If I then add items to the list, every page gets messed up and the second page ends up with 39 on the left column and less items in the right column for each added item.
If I use layout breaks instead of section breaks, the paragraphs following my lists (now with only one column) end up under the list. What that means is I can see my bold items, but beneath them are my paragraphs that belong after the list. I can see the layout break at the end of the list, but the columns that are shown as part of the 'view layout' are visible right over the single column text also for the rest of the page. The only way to solve that is to go with section breaks and put up with the gap from the end of the list to the following paragraphs.
I hope this makes more sense.
Tom
PowerBook G4 Mac OS X (10.4.8)

Adding new customized column in the Bex Report

Hi Experts,
I have an existing column (say A ) in Bex and I want to add one more column (say B) based on the values that I have in column A.
For e.g.,
A          B
5          5   (=A1)
8          3   (=A2 - A1)
15        7   (=A3 - A2)
I am able to create a new column B and bring the values based on above formula to get the expected results. Though the results are correct and also I saved the report as workbook, when I try to refresh the query again and open the workbook, the new column 'B' is getting disappeared.
Could someone please help me on this?
Thanks in advance for your help.
Bregards,
Krish

Hi Pavel
I'm hitch-hiking on this thread.
Can you please explain what do you mean by "the grid becomes static" when you use "Convert to Formula"?
I'm studying Excel integration in the BEx Analyser and it seems to me that when you select Convert to Formula and save the query, then you load new records into the Cube, when you open the query again it's no longer refreshed (even if you select "Refresh Workbook on Open". Is it what you mean?
I'd appreciate more detailed explanation. I'd appreciate too this documentation about BExGetData.
Thanks
César Menezes

Fiscal year in the columns outside the key figure structure

Dear Experts
I have a report requirement to show the keyfigures in the columns from year 1 to year 10 and in each year there are 4 keyfigures each restricted to 1 quarter for 4 quarters.
So, there are too many keyfigures to create.
I am using fiscal year in the columns outside the Key figure structure containing the keyfigures restricted at each of 4 quarters.
So, when the report displays, all the 10 years will automatically be displayed.
The problem is one of the 4 quarter level keyfigures needs to be restricted by calendar year.
How can I read what is the fiscal year for each column at runtime so that I can reference this value to determine the calendar year ?
As you know, each FY spans 2 Calendar Years. So, i need to restrict this on the 4th keyfigure by calendar year but while having the FY outside the keyfigure structure i can get all the FY, I am not sure how to access this value at runtime so that eg.
if FY for column 1 is 2010, i can set calendar year to be 2010 to 2011.
Hope you can give me some clues.
Thanks you Gurus!
Best regards
John

Dear Sunnybt
Copy Riyes, I find your response interesting. Please could you elaborate your idea of using condition in more detail.
Sorry for my late response.
Allow me to clarify my statement, which you are right, is unclear.
By :
"if the current QuarterFY is less than the current QuarterFY"
I mean :
eg. user enters FY range : 2009 to 20NN (eg. 2017)
KF_column1_FY2009_Q1______KF_column2_FY2009_Q2____KF_column3_FY2009_Q3______KF_column_FY2009_Q4______KF_column_FY2010_Q1______KF_column2_FY2010_Q2____KF_column3_FY2010_Q3______KF_column_FY2010_Q4_____KF_column_FY_NNNN_Q1
For each column, where the FY can be any year range entered by user,
the Text Description of the Column should show either 'Actual' or 'Plan' based on what is the current FY Quarter at runtime.
If the FY Quarter (eg. 1st column is 200101) is before current FY Quarter (i.e 201103), then the Description of this column should be "Actual" , else "Plan".
In my current design, I am unable to use customer exit text variable to meet this requirement.
So, I like to check with you for fresher ideas.
If not , I would use a workbook, which I am avoiding as the user needs to drilldown and I believe drilldown is not possible in workbooks where report layout needs to be rigid or cell positions fixed. Of course, unless there is a way out of this which I do not know.
Best regards
Bass

Question about the format of the workbook

Hi experts:
Is it possible to make a report whoes column is not fix in workbook? like :
product1 product2 product3 ......
sales volume
anyone has some suggestion?
Thanks advance .

HI cindy,
Once you create a workbook, the structure of the workbook cannot be changed automatically (except for the sheet where you have inserted your qeury in which case, any changes you make in this sheet would be lost once you refresh the query or reexecute the workbook) . you can change a sheet that you have created in that workbook and it doesn have any query inserted in that sheet as per my knowledge. Let us know if you find something new.
regards,
Sree.
Edited by: Sree Nair on Aug 18, 2009 11:23 AM

How to remove save, cancel option when end user runs the workbook in Portal

Hi,
how to remove save, cancel option when end user runs the workbook and make some small changes like using page items or increasing rows and columns
I already made 2 changes
1) I removed the option in Oracle Enterprise Manager under discoverer viewer of saving
2) I also removed the option of Allow saving changes made in Viewer when adding workbook to portal
But still the end user gets options of saving when made small changes to workbook like increasing rows and columns
Is their any place, I need to make changes?
Thanks in Advance
Rowdheer

Don't use JSP to serve a binary file. It almost implies the use of awful scriptlets and the invocation of both the response writer and the response outputstream which would only lead to IllegalStateException headaches in the server logs.
Use a Servlet instead. Specify the file name as request parameter and let the servlet read the file and write it to the outputstream of the response.

How to change the order of the columns in the Message List in Mail?

In Mail, in the Message List, is it possible to rearrange the column order of Subject, From, Date, Attachments, etc?
The upgrade to Snow Leopard changed the order of the above and I want to keep the old order that I had with Leopard.
Also, there is a column which has a black circle in it. What does it mean? I don't mean the smaller black circle, because that shows which emails been read and which are not yet read.
Thank you.
Lorna

To arrange columns, click on column title (To or From) and drag right or left.
The black dot column shows the type of message. There will be a counterclockwise arrow if the email is a response to a previous email or there will be an icon of a note if the message is a note

In Pages, the column in the table won't flow onto the second page. The text is hidden. Please help!

In Pages, the column in the table won't flow onto the second page. The text is hidden. Please help!

Thank you for your reply,
When I click 'view' , I can "show inspector". From the table tab, I can pull up the "Format". [See below]. I don't see the "Arrange" or "Object Placement Move with Text"
Right now I have the Wrap Text On. When I take it off, It messes up my rows [see second image].
All I want is for my column to flow onto the second page.
Your assistance is genuinely appreciated.
Thank you again.

How to re-arrange columns when outputting a SELECT statement?

Assume a table holds a lot of columns: A, B, C, D, E,......., Z
When outputting the result auf a SELECT statement the columns should be re-arranged as follows:
The first column should be E, then the second column should be C and then all remaining columns should
follows in a order as if there would be no re-ordering. How can I do this in SQL WITHOUT having to list all
columns individually like in:
SELECT E,C, A, B,D,F,.....,Z FROM .....
Furthermore the first and second column should not re-appear again (twice) as in a statement like
SELECT E, C, * FROM .....;
How can I achieve this?
Peter

Hi,
Welcom to the forum!
Posting your own question in someone else's thread is called "hijacking".
More people will read (and answer) your question if you start your own thread.
You can include a link to this thread, if you think that will help people. See the "Plain Text Help" on the right side of the "Edit Message" screen to learn how.
If you have more output than will fit on one line, then you can
(1) Increase the size of the line, or
(2) Decrease the size of the output
or both.
Display issues like this always depend on your front-end.
For example, in SQL*Plus you can use SET LINESIZE to make lines bigger, and COLUMN to reduce wasted space within the lines.
When you start your own thread, be sure to mention your front-end tool and version.

Ordering the groups and columns in the Presentaion Services

Hi Gurus,
We are grouping the columns in the presetation Layer of RPD. Consider the senario like this GroupA having columns and sub groups subgroup1, subgroup2. When we navigate in answers it is displaying Group A under that subgroup1,subgroup2 and Group A columns. Can't we arrange it as Group A columns and then subgroups in the answers. Is there any config file to set the like this?
Please help me..It's urgent.
Thanks in Advance....

Hi user590267,
I'm experiencing the same and I don't see a way to change this standard behavior of OBIEE. The only workaround I have is to create a separate subfolder for the Group A columns..
Regards,
Stijn

Value not appearing in the workbook

Hi Friends,
There are some values in the workbook which are prob appear through cell references. In dev sys its fine. We have moved the workbook to Quality, but here the values are not appearing. The value is period value which is not comming from either query columns or rows. I am unable to track down from where this value is appearing in the workbook. This period value appears where this (Layout ->display text elements ->General) appears ofcourse in Dev not Quality. There are many tabs(Queries) in the workbook.
How to know/check from where this value is getting populated.
Thanks & Regards,
Shreesh.

After adding 'trip type expenses in the layout' in the layout, save the layout as a variant and give it a name.
Next time when you run the report, put that variant and then run
Values will come

Re-Arrange columns in the workbook

Similar Messages

Maybe you are looking for