Re: Jmf Video Transmitting Problem plz take me out from this trouble

two suggestions,
Try running your server code on a different server,(could be a problem with java install)
and second change your transmit code back to the transmit for 60 seconds, then try refreshing explorer.

I think I had the same problem, but I stopped working on my project.
I think what the problem is, your jsp page can't create a new instance of your AVtx class each time page is loaded, there must be only one instance.
Is it possible that when you click IE refresh that there is a second instance of AVTx trying to run??
The way I planned on solving mine, was to create either DataGramSockets or Sockets and have AVTX listen on a socket, then have jsp pass the ip,port numbers to AVTx using packets/sockets, then AVTx would parse those parameters and transmit.
You would then be removing AVTx out of your SERVLET contianer,, I used TOMCAT .
I had very strange problems trying to run the transmitter from within tomcat.

Similar Messages

In my ip 5s lte is not working please he me out from this problem

lte is not working in my iPhone 5s . Tell me some good idea for solving out from this problem

Your iPhone needs to be model A1457 and your carrier needs to be either Beeline or MegaFon, which are the Apple supported carriers for Russia. Otherwise, you iPhone may not support the LTE bands used by other carriers.
There is no way to fix this problem. You need the correct iPhone model and a supported carrier or else the service may not be available.

HT4623 when i finished downloading a usb cable and itunes logo appered so i plugged it in the itunes and it said i should take it out from recovery by restoring it.it took 3 hours but at last it didnt download what should i do?

when i finished downloading a usb cable and itunes logo appered so i plugged it in the itunes and it said i should take it out from recovery by restoring it.it took 3 hours but at last it didnt download what should i do?

Try holding the home and lock buttons until the iPad reboots. If it does not start up normally, then you will have to restore. To avoid any longer downloads, go to here: http://www.ipswdownloader.com/download-ipad-ipsw-files.php
and look for your iPad and download the latest firmware. When done downloading, make sure the file is in a easy place to get to. Then, go on iTunes and connect your iPad. Hold your shift key, and press restore. Locate the .ipsw firmware and restore. Make sure no programs are open during the restore proccess as it may interfere.

Jmf video fps problem

Hi to all,
I'm developing a program that takes frames from a video, which are currently working on a jmf player object, and display them with jogl in a GLJPanel. the video is 30 fps. But my display function is called 20 times per second. Therefore I'm loosing some of the frames and video cannot be seen smoothly. I guess that the problem is due to the jmf player's frame rate, because it is the only thing that triggers jogl display function. What I want to know is if there is a way of displaying a 30 fps jmf video by jogl bindings and if yes how? I'm taking the current frame and displaying it as a texture within the display function. Is it ok for my application?
I will be glad if anyone can help me..Thank you very much.

Two things you should know:
1) You can't play ANYTHING in AE. It's not an editing application, and it doesn't work like one... as in, "push the spacebar and video plays". Nope. You have to do a RAM Preview by hitting the zero key on the numeric keypad.
2) You'll save yourself days of frustration and anger by learning the basics, which can be found here:
Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC)

Plz help me out of this problem

Hey guys i dont know where to post this topic questions,
I am using JasperReports and IReport to desgin jrxml. I am having a problem while executing the java program which generates the html file to the local folder as per the design. It was worked well yester day. But When working today with some other data it shows exception. The code is
import net.sf.jasperreports.engine.*;
import net.sf.jasperreports.engine.data.*;
import net.sf.jasperreports.engine.fill.*;
import net.sf.jasperreports.engine.export.*;
import net.sf.jasperreports.engine.util.*;
import net.sf.jasperreports.view.*;
import java.sql.*;
import java.util.*;
import java.io.*;
import java.net.*;
public class CountryTest{
public static void main(String arg[]){
String filename = "f:/iReport-0.4.1/iReport-0.4.1/countrynew.jasper";
String driver = "sun.jdbc.odbc.JdbcOdbcDriver";
String connectString = "jdbc:odbc:abcddf";
String user = "sfddf";
String password = "sfsdfdddd";
HashMap param = new HashMap();
try{
     Class.forName(driver);
     Connection conn = DriverManager.getConnection(connectString, user, password);
JasperExportManager.exportReportToHtmlFile(JasperFillManager.fillReportToFile(filename,param,conn));
File reportFile = new File("f:/iReport-0.4.1/iReport-0.4.1/Country.jasper");
System.out.println(reportFile);
JasperReport jasperReport = (JasperReport)JRLoader.loadObject(reportFile.getPath());
System.out.println(jasperReport);
JasperPrint jasperPrint = JasperFillManager.fillReport(jasperReport,param,conn);
System.out.println(jasperPrint);
catch (Exception e)
     e.printStackTrace();
     //System.exit(1);
The same code is worked fine yesterday(23/02/2005). But the same is shows some exception when i execute today (i just change the jasper file product.jasper instead of Country.jasper). The exception is
Exception in thread "main" java.lang.NoClassDefFoundError: org/eclipse/jdt/internal/compiler/env/INameEnvironment
at java.lang.Class.getDeclaredConstructors0(Native Method)
at java.lang.Class.privateGetDeclaredConstructors(Unknown Source)
at java.lang.Class.getConstructor0(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at net.sf.jasperreports.engine.design.JRDefaultCompiler.loadCalculator(JRDefaultCompiler.java:192)
at net.sf.jasperreports.engine.fill.JRBaseFiller.<init>(JRBaseFiller.java:370)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:126)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.<init>(JRVerticalFiller.java:118)
at net.sf.jasperreports.engine.fill.JRFiller.fillReport(JRFiller.java:111)
at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillManager.java:291)
at net.sf.jasperreports.engine.JasperFillManager.fillReportToFile(JasperFillManager.java:182)
at net.sf.jasperreports.engine.JasperFillManager.fillReportToFile(JasperFillManager.java:138)
at JustTest.main(JustTest.java:27)
reply me immedtly
san

i'm already over this issue, now i'm face to face with the next:
java.lang.NoSuchMethodException: Unknown property 'appat'
at org.apache.commons.beanutils.PropertyUtils.getSimpleProperty(PropertyUtils.java:1175)
at org.apache.commons.beanutils.PropertyUtils.getNestedProperty(PropertyUtils.java:772)
at org.apache.commons.beanutils.PropertyUtils.getProperty(PropertyUtils.java:801)
at net.sf.jasperreports.engine.data.JRBeanArrayDataSource.getFieldValue(JRBeanArrayDataSource.java:148)
at net.sf.jasperreports.engine.fill.JRBaseFiller.next(JRBaseFiller.java:890)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillReport(JRVerticalFiller.java:160)
at net.sf.jasperreports.engine.fill.JRBaseFiller.fill(JRBaseFiller.java:691)
at net.sf.jasperreports.engine.fill.JRFillSubreport.run(JRFillSubreport.java:427)
at java.lang.Thread.run(Thread.java:534)
NESTED BY :
net.sf.jasperreports.engine.JRException: Error retrieving field value from bean : appat
at net.sf.jasperreports.engine.data.JRBeanArrayDataSource.getFieldValue(JRBeanArrayDataSource.java:160)
at net.sf.jasperreports.engine.fill.JRBaseFiller.next(JRBaseFiller.java:890)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillReport(JRVerticalFiller.java:160)
at net.sf.jasperreports.engine.fill.JRBaseFiller.fill(JRBaseFiller.java:691)
at net.sf.jasperreports.engine.fill.JRFillSubreport.run(JRFillSubreport.java:427)
at java.lang.Thread.run(Thread.java:534)
any idea to solve it???
sorry about my english, i know isn't good enought

CopyExpress integration problem (Plz help me out)!!!!!!!

Hi!! To all,
Me Tuhin Working as SAPB1 consultant.
Recently I faced a Problem. Prevoiusly used to work on MSSQL 2000and now migrated to MSSQL 2005. And I have uninstall and re-install SAPB1.
But Now I can not install COPYEXPRESS, all the time system shows a message "Add Ons can't start".
Please help me out, its urgent
With Regards
Tuhin

Hi,
Here is another solution from SAP notes about addon can't start:
(quote}
Add-on does not start
Symptom
After having installed the Add-On successfully, you start the Add-On and it stops with an error message.
Other terms
Extension's set-up function failed,The server threw an exception, Connection to company failed, add-on
Reason and Prerequisites
See solution.
Solution
When the Add-On is started for the first time in a company, it has to initialize itself. There are some known reasons why this process can fail:
   1. The add-on appears not to start. Immediately after you start it, a system message appears telling you that the Add-On is disconnected. Ensure that you have assigned an Add-On license to the logged-on user. Use Administration->Add-ons->Add-on Administration to assign the license.
   2. A message box appears with the title "SBOAddOnLoader". This error message is issued by the UI-API. The Add-On has a problem connecting to the UI-API. Uninstall the SAP Business One client and reinstall it.
   3. Shortly after starting the Add-On, the following message appears: "Error getting last error from DI-API". The Add-On tries to connect to the DI API, but the connection fails. Now the Add-On asks the DI API for the reason. This request also fails, probably because the DI API has not been installed. This is not a problem caused by the add-on. Install the DI API from your SAP Business One CD.
   4. After starting the Add-On, the following message appears: "Connection to company failed: the server threw an exception". This is probably due to a version mismatch. The installed DI API is not suitable for the installed version of SAP Business One. The part of the error message after the colon is issued by MS Windows, thus the message may appear in your local language. This is not a problem caused by the Add-On, but anunexpected error that occurred inside the DI API. Uninstall the wrongversion of the DI API and install the appropriate version.
      If the message after the colon is different from the above-mentioned message, the text is issued by the DI API and should describe the problem.
   5. After starting the Add-On, the Add-On runs for some time displaying a progress bar. After a while it stops and the following message appears: "Extension's set-up function failed (... Class)". This means that the Add-On encountered a problem during its initialization. Instead of the three dots, the name of the Add-On is shown. A different Add-On may have been running while this one tried to initialize itself. Stop all SAP Add-Ons before you install a new one. After a successful installation and initialization of the Add-On, you can restart the others. If no other add-on is running and the error still occurs, it may be a problem specific to this Add-On. Check the SAP Notes related to this particular Add-On.
(quote}
Rgds,

Can i take SFM2 out from my 6500 core

Hi,
I have two core 6500 switches pls see the below commands
CORE1#sh fabric utilization
slot channel Ingress % Egress %
1 0 0 1
3 0 0 0
3 1 1 0
CORE1#sh mod
Mod Ports Card Type Model Serial No.
1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-S2U-MSFC2 SAL0607J3K8
3 16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC SAL06090G2R
5 0 Switching Fabric Module-136 (Active) WS-X6500-SFM2 SAD060705EJ
Mod MAC addresses Hw Fw Sw Status
1 0006.d65a.876c to 0006.d65a.876d 3.4 6.1(3) 7.2(0.35) Ok
3 0009.11e0.0cd0 to 0009.11e0.0cdf 1.3 12.1(5r) 12.1(11b) Ok
5 0001.0002.0003 to 0001.0002.0003 1.1 6.1(3) 7.2(0.35) Ok
Mod Sub-Module Model Serial Hw Status
1 Policy Feature Card 2 WS-F6K-PFC2 SAL06090FF3 3.0 Ok
1 Cat6k MSFC 2 daughterboard WS-F6K-MSFC2 SAL0551FG9K 2.0 Ok
3 Distributed Forwarding Card WS-F6K-DFC SAL0607J9KX 2.0 Ok
the traffic is always like this is it recommended to take out SFM2 from the switch as there is no as such load on the switch . What is the rough cost of this SFM2 module ...
rgds
sandeep

dear Amit,
do i need sfm2 in the below case also ??
1 2 Catalyst 6000 supervisor 2 (Active) WS-X6K-SUP2-2GE SAD04500K94
2 2 Catalyst 6000 supervisor 2 (Standby) WS-X6K-SUP2-2GE SAD04490KLW
3 16 SFM-capable 16 port 1000mb GBIC WS-X6516-GBIC SAD061100EJ
4 16 SFM-capable 16 port 1000mb GBIC WS-X6516-GBIC SAD061100GC
5 16 SFM-capable 16 port 10/100/1000mb RJ45 WS-X6516-GE-TX SAD06110108
7 0 Switching Fabric Module-136 (Active) WS-X6500-SFM2 SAD061506TP
9 48 SFM-capable 48-port 10/100 Mbps RJ45 WS-X6548-RJ-45 SAD060904S2
10 48 SFM-capable 48-port 10/100 Mbps RJ45 WS-X6548-RJ-45 SAD0604045L
11 48 SFM-capable 48-port 10/100 Mbps RJ45 WS-X6548-RJ-45 SAD06060427
12 48 SFM-capable 48-port 10/100 Mbps RJ45 WS-X6548-RJ-45 SAD060904R8

Please help me very Urgent I appreciate whoever takes me out of this mess

Hi! I have a short term project to develop a web page displaying in a table format. The data for thatcomes from 2 CSVs. and that table format should be exported to Excel. What I am going to do is first CSVs should be converted into XMLs and then merge XMLs and then convert it into HTML. First CSV is coming from SAP and the other from Mainframe. These files are to be pulled up by customer on every 3/4th business day of the mnth. Can anyone please suggest how it should be done....
I would appreciate if anyone sends me code for exporting..after converting file into HTML.

If you are going to do the calculations in your code and put the results in the cells, then yes. If you want to put Excel formulas in the cells then you would have to use a more complicated method. But since your input doesn't contain any formulas, I don't really see the need for formulas in the output. I would do the calculations in your code if it were up to me.

Plz help me out in this

Does any one know the standard SAP script or form name to generate FI invoice??
Please let me know.
Awaiting for ur response.

Correct.
This has never been a feature of iphone/ipod/ipad

Sync problem "not authorized to sync from this computer"!!

When I want to sync my iphone with application that I download to my itunes in my comuter. it gives error and says you are not authorized to sync your iphone at this computer???Why not??

Diane,
I may have had another ID when I first started using iTunes - I just can't remember - I'll try to narrow it down using the smart playlist that you have suggested. As I'm thinking, I wonder if a disk that my daughter created for me a few years ago as a birthday gift (Dad's Mix) contained music that she had purchased with her account ID on iTunes, could be the culprit. Anyway, as I said, I'll try to whittle it down to isolate the songs that are generating the message. Thanks.

How to take print out from mobile e63

i bought a hp 1007 lase printer now i want to connect it using bluetooth using my laptop,how can i send command from mobile to printer using my laptop ,i have tried but unable to print what device settings are missing will i have to update any drivers in my mobile or cannot think.the mobile gets paired with laptop but no print comes out ...pls advise

Did you set up the printer in menu-> office-> printers?
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Hi,I have 4s,I have a problem since 2days that the ring tone,lock sound,password sound,volume button and slide,calls flash,all sometimes working and sometimes not,plz help me to solve this problem.thanks

HI
i have iPhone 4s with iOS 8.1.3 , since 2 days I'm facing a problem that the ring tone,lock button sound,password sound,volume buttons,slide volume and incoming call flash,
all these not working properly , sometimes it will work and sometimes it will not, I tried to restart the phone many times but I didn't fix the problem
plz help me to solve this problem

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups

Can we able to take the out put have the file into another file in unix

Hi all ,
My question is .. we are having one shall fill , we need to take the output of that file to another file ,
but the output is not printing into another file..
what am guessing is we have only read and execute permission on that file.. we don't have write permission on that file and the folder where the file is exists .
my Question is , Do we need all permission on File to copy the output to another file... ?
because we are redirecting the output to another folder where we can create the another file and read and write permissions .
-rwxrwxr-x 1 th th 499 Jun 20 01:06 Coverage
like this we are having the permission on that file
for the folder we are having the permission
drwxrwxr-x 6 kpsmith kpsmith 12288 Aug 9 21:59 1.3
can any one help me out from this problem
Thanks
Sreedhar

Assuming 'shall fil' is shell script , other than dumping even more garbage in this forum, what does this question have to do with Oracle?
Or can't you type anything in the address bar of your browser and is this URL the only one you can visit?
Sybrand Bakker
Senior Oracle DBA

Out of order when put /take packages in/from a blocking queue

Hello all:
I put multiple packages in a blocking queue in one thread, and take them out from another thread. The in sequence is 1-2-3, the out sequence becomes 3-2-1. This is NOT a FILO pattern, there is no pattern: it could be 3-1-2, etc.
The question is: can out-of-order issue even take place when put()/take() operations impose on a blocking queue? If it's not possible, which I believe, I'll look elsewhere for the cause. Otherwise, why and how to fix it.
Thanks,
John

Please provide an [url http://sscce.org]SSCCE that demonstrates this.
Unless you're using a PriorityQueue or some other specialized implementation, it should be a FIFO order. Check the docs for the implementation you're using.
Edited by: jverd on Nov 22, 2011 4:41 PM

Need to take Print out - PL SQL Program / Unix

Hi,
I need to take print out from a file already created in Database Server in a specific path to a printer. Any PL SQL program or any shell script is there to do this??
Thanks,
Neil

Neil_80 wrote:
I need to take print out from a file already created in Database Server in a specific path to a printer. Any PL SQL program or any shell script is there to do this??Not enough information.
{message:id=9360002}
It's perfectly possible, but will depend on where your data is and whether it's already a printer output file etc.
e.g. you could use the dbms_scheduler package to call a command line that sends the file directly to the printer device
However, the specifics of that will depend on your database version and your operating system, and what file you're trying to send.

Re: Jmf Video Transmitting Problem plz take me out from this trouble

Similar Messages

Maybe you are looking for