Re: Pre-Configured Workflow Scenarios

Hi All,
I came to know through the SAP Documentation that some pre-configured Workflow scenarios are available in especially in IDES environment.
I'm looking for some pre-configured Workflow scenarios in ECC environment related to Item/Material/Product create. Please let me know where I can find more information on this and how to consume/use these pre-configured Workflow scenarios.
Thank you
Surender

David/Andy:
Really good points guys. I certainly am not saying Motion should be like AE. I am not starting a thread that is a comparison of the two. Each has it's own workflow, and Andy I think you bring up a really good point. I rarely use clones but they are a powerful tool in the right circumstance. I am curious about more complex design workflows and how some of us push the limits.
David, I agree with your point about keeping Motion simple. Apple is proficient at keeping their software/hardware simple. Software that serves one purpose, or devices that have only a few buttons. The elegance is what we all like.
Additionally, to your point Andy, we can do things withOUT precoming in Motion. Just keeping things in layers is good enough really. Like I said, I'm not really an AE user, but I do understand the concepts. I like the idea of a pre-rendered portion of the animation. Just seems to take the processor intensive portions out of creating complex animations. Moreover I think I am just wondering if I could create more complex animations WITH some of the design workflows that AE offers (like pre-rendering).
At the end of the day I feel like I can do SO much with Motion, and have wiggle room to play around more. I'm definitely excited about a new version of Motion, and to see what sort of new features make it in. Perhaps nodal workflows, perhaps more 3D design tools... we'll see.

Similar Messages

  • How to configure workflow manager 1.0 ? Scenario "sharepoint 2013 and sql server 2012 workflow manager in one server" .

    i have sharepoint 2013 and sql server 2012 in one server . how to configure workflow manager 1.0 on the same server ?

    Please follow below technet article :
    http://technet.microsoft.com/en-us/library/jj658588(v=office.15).aspx
    Installing and Configuring Workflow Manager 1.0 (Step by Step)
    Note: The steps in this article apply to SharePoint Server 2013.
    The SharePoint 2013 Workflow platform is not supported in SharePoint Foundation 2013.
    If my contribution helps you, please click Mark As Answer on that post and
    Vote as Helpful
    Thanks, ShankarSingh(MCP)

  • SAP Workflow Scenarios

    Dear all,
    We are planning to implement SAP workflow, for the creation of material master and info record of the materials. We are using SAP 4.7 version. Can you give me any idea or hint about how we can configure these cases. Is there any standard workflow on SAP?  If you can also send me documents or web address would be appreciate.
    Thank you for your help
    Melih

    Yes there is and you might not need any help from a workflow professional if you are trying to keep it simple
    Use the following links. They are of great help
    Link: [http://help.sap.com/printdocu/core/print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf.]
    Link :[http://www.sapdb.info/sap-workflow-scenarios/]
    link: [http://****************/Tutorials/Workflow/Workflow.htm]

  • [Desktop] Pre-configured installs

    Any suggestions on how to create pre-configured installers of the same base app? Here's an example of what I mean:
    App: This base app connects to a configurable server domain. You could install and use this app just fine.
    App for ClientX - This app should connect to serverX, and I want to pre-configure it to do so. It may also have custom configured branding for ClientX.
    App for ClientY - This app should connect to serverY, etc.
    So I want to be able to give ClientX an installer (or install link) that installs the App pre-configured to connect to their serverX, and I want to give ClientY an installer that connects to their serverY, but I want both to be the same application, built from the same codebase, with the same appID and certificate, and receive the same updates, etc.
    I've considered using compile constants to create different AIR app versions with populated strings, which I think would work though a bit clunky, but would result in different versions of the app, when what I really want is to have the SAME version configured differently.
    What I am currently doing is making a config file that can be shared, so the main app is installed then the client opens the config file with the app (file association makes this relatively easy, but still very manual feeling.) I would essentially like to automate this, so the end user only needs to run the installer.
    The next step would be automating this process, so that when ClientZ purchases the app it uses ClientZ's information to provide an installer configured for ClientZ without manual human intervention. You know, for when my app inevitably gets famous and makes me rich.
    Any suggestions?
    Thanks all!
    -Aaron

    Well I'm not quite sure this fits your scenario but maybe (assuming your clients install your app from a website)...
    You can use the swf (badge) method of installing AIR apps through the browser: http://help.adobe.com/en_US/AIR/1.5/devappsflex/WS5b3ccc516d4fbf351e63e3d118666ade46-7e15. html
    This would give you the ability to pass in arguments into the install process. http://help.adobe.com/en_US/AIR/1.5/devappsflex/WS5b3ccc516d4fbf351e63e3d118676a5d46-8000. html#WS5b3ccc516d4fbf351e63e3d118666ade46-7e19
    Basically you set your air app to "<allowBrowserInvocation>true</allowBrowserInvocation>" and add a listener for the BrowserInvokeEvent(not InvokeEvent)
    Do what you want with the parameters (maybe save to a flash shared object) to remember who it was.
    Then for distribution, provide a client only page, that passes flash vars into the badge swf, which passes them to the app for install.
    I recently used this method in this way. I'm building a video conference app that can send invitations via a URL (videoapp.com?id=abcdefghijklnop).. On that page I have the badge (swf) that recieves that invitation through flash vars. The badge does the install of the AIR app and passes the invitation once it runs.
    Note: I had to modify the default badge.swf to include my additional flash vars.
    Other than this, I dont know of any way to add arguments to just a regular passed around .air file.

  • Need help with a CUP workflow scenario

    Dear Experts,
    I'm sure it is not just me encountered this required scenario (or something similar).  I would like some pointers how to transcript it to a CUP workflow:
    Application admin logs a provisioning request.
    Security creates a user account and provisioning the roles on QA.
    Application admin ensures that the user undergoes training on QA.
    Upon passing the training, security replicates the user account and role assignment on PRD.
    The esoteric solution would be one request, two paths, two provisions. Is it somehow possible?
    Client doesn't use CUA.
    The security requirements are higher on PRD, where SoD handling will be required.
    Kind Regards,
    Vit Vesely
    Edited by: Vit Vesely on Apr 29, 2010 3:29 PM

    Hii Vit,
    If you want to have two paths for a single request than only possible solution will be to create role based initiator's.
    Role Based Initiatator's can be created by following Configuration -> Workflow-> Initiator-> create.
    Here Select the attibute as roles.
    For example create two Initiator
    Intiator1 -> having Role1 attribute -> Path1
    Intiator2 -> having Role2 attribute -> Path2
    Now in the request if u select Role 1 & Role 2, than request will follow the parallel path ( path1 & path 2)
    Else it is not possible to have parrallel workflow path for any other attribute.
    In Case you can have provisioning at end of the paths as well as end of the request.
    Kind Regards,
    Srinivasan

  • Need SD & MM Workflow Scenarios

    Hi experts ,
    I'm studying SD & MM functional, I need to know about real time SD & MM Workflow scenarios, how it works, how it is configured, administrated etc. If u have any screen shot Pdf on SD or MM workflow's please send me the same to my e-mail id [email protected]
    with regards,
    James....
    Valuable answers will be rewarded....

    Hi,
    For MM related workflow scenarios go to this link:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/1d/ea9d9c7aca11d194b70000e82dec10/frameset.htm
    For SD related workflows go to this:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/5d/6cd8b6a1ef11d194d70000e82dec10/frameset.htm
    Hope this helps,
    Sudhi

  • Facing some problem while configuring Workflow Manager 1.0.

    Hi,
    I am facing some problem while configuring Workflow Manager 1.0. in my farm.
    Scenario is,
    I have installed and configured workflow manager in my farm, it was working well with no issue. But one of team member played with AD and deleted Farm administrator's entry from AD by mistake. So suddenly workflows get affected and stopped working. 
    Then I added administrator entry in AD, uninstalled the Workflow Manager and installed it again. But now while configuring workflow manager I am facing some issues that "Failure to adding user in BUILTIN\Administrative group. Please add it manually" 
    And after sometime it shows another error message that, "Starting service Service Bus Massage broken failed: Timed out has expired, the operation has not been completed" 
    If I go for services then "Service bus Message broker" service is not running properly (Its status is just showing "Starting")  and don't starts.
    I have also added the user in BUILTIN\Administrator, IIS_IUSER, WSS_WPG group of the machine from computer manager - user and groups. 
    Also given permission to databases, and assign role of sysadmin and dbcreator to user
    I also tried following steps    
        1) Stop all services associated to workflows
        2) Uninstalled workflow manager
        3) Deleted all databases associated with workflows
        4) Installed workflow manager and tried to configure.
    But showing same error. 
    If I use another SharePoint server farm to configure workflows, there I am not getting first error of adding user to BUILTIN\Administrator group. but second error remains same.
    We having SQL server and Active directory at another machine and FARM at another machine, if I use local admin for configuration of the workflows (as local admin can start any services) but entry of local admin is not Active directory so can not assign SQL's
    sysadmin, and dbcreator role to local admin.
    I am attaching snapshot of error for better understanding.
    Your help will be very precious to me. 
    Thanks,
    Rajesh
    Rajesh Agravat

    Rajesh
    Check to see what the service accounts are being used for these Workflow Manager 1.0 services:
    Service Bus Message Broker
    Service Bus Gateway
    Workflow Manager Backend
    All of these should be running and your workflow service account should be running all of these.  If any are still configured under the old service account, they'll need to be updated.  Next, check to see what service accounts have access to the
    Workflow Manager 1.0 databases:
    SbGatewayDatabase
    SbManagement
    SbMessageContainer
    WFInstanceManagement
    WFManagement
    WFResourceManagement
    The Workflow Manager service account should be mapped as the DBO for all of these.  if any are still configured under the old service account, they'll need to be updated.
    Given the complete loss of the original workflow service account, and the resultant impact on security configuration throughout the workflow farm, I would recommend performing a re-installation.  Do it thus:
    Launch Workflow Manager Configuration Wizard
    Select the Leave Workflow Manager Farm
    Stop all workflow services (see above list)
    Repeat steps 1-3 for each instance of Workflow Manager 1.0 Server installed.
    Delete all Workflow Manager databases (see above list).
    reboot.
    Start new installation.

  • Changing the configurations of pre-configured BOM on a Sales Order

    Hello experts,
    Our client's business is similar to OEC Computers. However, I am not able to map the following business scenario:
    They sell servers to customers however, it is unusual that the client buys the pre-configured model as provided by the principal. therefore, as per the specific requirements of customer they change the configuration of the server.
    For e.g. the pre-configured model has 2GB of RAM however, the customer wants to replace the the 2GB RAM with a 4GB RAM.
    The replacement is important to track as Inventory will have an affect on it.
    Please advise the possible solutions.
    Regards

    Hi Adeel,
    At the time of Production order you chane the 4GB RAM Instead of 2GB.
    Traking of the Replacement item you use some Additional query report to be use.
    *Close the thread if issue solved.
    Regards
    Jambulingam.P

  • Failsafe method to create NetInstall image of pre-configured MacOSX

    Hi All
    I am trying to create NetInstall image of a pre-configured MacOSX install(mid-2011 mac mini) in this case.  Here is my workflow:
    1.  Setup base OSX Mountain lion
    2.  Do all updates and configure System Preferences and Finder Preferences as desired
    3.  Install all desired software to be packaged with the system
    4.  Boot into target mode and then use a second mac mini running Casper Composer to create a .dmg of the OS.
    5.  Copy the finished .dmg to ML Server
    6.  Try to use System Image utility to create a NetInstall image that other mac minis can then use as base install
    I havent had any success so far creating a valid .nbi folder I can use(and that works) for re-deployment unless I use Casper Admin and Casper Imaging to manage this.  The reason I am trying to get away from using them is that the differnece between buying a $70 Casper Composer(or using the free Disk Utility) and buying the full Casper Suite is considerable.  Also, my understanding of System Image Utility is that:
    1. It should be possible to build a customised image of OSX from base with packages and coonfiguration added but it doesnt seem to work
    2. NetInstall is the only viable option for what we want to do as NetBoot presumes you will boot off the image each time you start up(which is not what we want - we want the ability to clone systems and from bare metal if necessary) and NetRestore flatly doesnt seem to work from .dmgs.
    Here is what I have found:
    a) I can create NetInstall images from a mounted downloaded Apple-provided OSX Installer that work but as soon as I put customisations in them, the customisations fail.
    b) By default NetInstall is greyed out when you mount the dmg and use it as a source in System image utility.  Suggestions online are to change the Source to use a New variable and then point it back at the same location.  NetInstall is then available.  If you try to create a .nbi from this, you get an error saying that there isnt enough space on the target drive - the uncompressed dmg is about 7GB max and there is a spare 60-70Gb free on the drive I am trying to create the image on.
    c) I have tried manually creating the .nbi folder but the instructions I found at http://support.apple.com/kb/TA21133 for doing this are outdated as they apply to ppc firmware and although I suspect the technique will still work, I cant work out which elements of the i386 folder I need to retain/move.  Copying the i386 folder from another working Netinstall folder doesnt help.
    d) I found some links suggesting that NetInstall only worked when the OSX versions were identical so I tried to run the System Image Utility on the Mac where the dmg was created.  Here I get two errors:
         i) If I just run the NetInstall using the default source, it errors saying an unknown error has occurred and get the following in the log:
    Workflow Started (2013-08-21 11:39:45 +0100)
    OS X 10.8.4 (12E55), System Image Utility 10.8.3 (624)
    Starting action: Define Image Source (1.4)
    Finished running action: Define Image Source
    Starting action: Create Image (1.7.2)
    Starting image creation process...
    Create NetInstall Image
    Failed to validate the install type!!! Error: The source volume is not an OS X 10.8 volume.
    An unknown error has occurred.
    An unknown error has occurred.
    Image creation process finished...
    Stopping image creation.
    Image creation failed.
         ii) If I change the source to the .dmg file and unmount it quickly to avoid any file locks, the installer goes further and seems to almost finish but then gives the following error(just appending the final bits):
    + echo 'Detaching disk image'
    Detaching disk image
    + '[' DEBUG == DEBUG ']'
    + /usr/sbin/lsof +fg /tmp/mnt.UJaQAiTy
    COMMAND PID USER   FD TYPE FILE-FLAG DEVICE SIZE/OFF NODE NAME
    mds 36 root   24r   DIR R,EVO    1,5      306 2 /private/tmp/mnt.UJaQAiTy
    + '[' '/dev/disk1s2 on /private/tmp/mnt.UJaQAiTy (hfs, local, nodev, nosuid, nobrowse)' '!=' '' ']'
    + /usr/bin/hdiutil detach /tmp/mnt.UJaQAiTy
    "disk1" unmounted.
    "disk1" ejected.
    + /bin/rmdir /tmp/mnt.UJaQAiTy
    + return 0
    + '[' '' '!=' '' ']'
    + /bin/rm -r '/Users/admin/Documents/NetBoot of Untitled 1.nbi/i386'
    + /bin/rm '/Users/admin/Documents/NetBoot of Untitled 1.nbi/NetInstall.dmg'
    + /bin/rm '/Users/admin/Documents/NetBoot of Untitled 1.nbi/System.dmg'
    + /bin/rmdir '/Users/admin/Documents/NetBoot of Untitled 1.nbi'
    + exit 1
    Script is done.
    Bridge exited with status 256
    Failed to create image from restore source.
    An unknown error has occurred.
    An unknown error has occurred.
    Image creation process finished...
    Stopping image creation.
    Image creation failed.
    Anyone have any idea how I can get around these issues?

    First, let's define the various image types...
    NetInstall:
    A network based image which, when booted into, presents the user with a Mac OS installer. Functionality is effectively the same as running the Install Mac OS X application locally on a machine.
    NetRestore:
    A network based image which, when booted into, uses Apple Software Restore to replace the contents of a volume with a previously imaged volume.
    NetBoot:
    A network based image which, when booted into, acts just like a locally booted hard drive, except no changes are written to the disk. Each time the client boots into the NetBoot volume, the system is "reset" to the original state.
    As defined by your workflow, you are trying to create NetRestore images.
    As piperspace has noted, you need to start with the latest OS Install application. Starting with an older OS which has been updated to the latest will not work.
    Creating NetRestore images from other disk images doesn't work because you need to have the Recovery Partition available. As both chicster and piperspace have noted, the way to do this is to image the volume directly.
    Many preferences are "ByHost", which means that they are keyed to the UUID of the machine they are set on. To make those settings transfer to the new machines, you may need to use the "Apply System Configuration Settings" action and check the "Change ByHost preferences to match..." option.

  • Example workflow scenario using webflowconnector

    Hi all,,
    I have many queries related to implementation of workflow in UWL.
    I have read online help and blogs
    The part of configuring the UWL in the intial go is well understood
    I wanna implement a sample workflow scenario in UWL
    - for this i need to configure the UWL in my EP portal ,,which i did using workflowconnector
    - But i wanna knw from where the workitems .The table rows(records created) is accumulated ,,eg in tasks..
    Is the data should (sample records /tasks)be populated in the backend itself or from the portal i can create.....
    I dont have any ABAP knowledge to work at the Backend R/3,,how to fill it there
    any other way which is available
    I need sample tasks/records to be filled in the UWL iview under tasks.notifications etc how can i fill?
    I request you to give me sample simple  scenario  with all the steps
    may be between two users (like approver....employee)
    I need it badly at the earliest..help me experts..pts will be rewarded as per norm.
    Thanks
    Swathi

    Ok,,
    i shall try to put in this way,,
    ok taking the scenario of  ESS ..,
    what are the settings u do ,,,with which the manager and employee is identified by the ESS..
    without ESS cant i implement a workflow scenario using webflowconnector in my UWL iview...
    IF i could,,then after configuration i get a blank iview with tabs--tasks/alerts/notifications
    Now ,,hw should a  i put the single task(u can call record in this table)
    for eg
    subject                                      priority  Absencefrom     AbsenceTo
    approve absence of swathi           High     March7             March11
    from wher does the table data come from?
    Wher u mention who is approver ,who is employee?
    Hope it made sense
    Swathi

  • Materials Management: Workflow Scenarios

    Dear Support,
       We are going to Implement or configure the Workflow Scenario for PR and PO for releasing the document.
    So pls help in this regard by providing any usefull document or link so that we can able to configure the workflow.
    Provide the conceptual document for workflow management in MM.
    Thanks

    Hi,
    One more Doc that you can refer is
    http://help.sap.com/saphelp_47x200/helpdata/en/04/926f8546f311d189470000e829fbbd/frameset.htm
    Very helpful.
    Regards,
    Ninad Kshirsagar

  • Configure workflow

    Hai group
    I have to configure the workflow for ESS and MSS, when I am trying through SWU3, but I am not sure exactly how to configure the  standard workflow
    The user WF-BATCH is available, and when I m trying to customize the workflow for the services like MAINTAIN DEFINTION ENVIRONEMNT           etc, ( by right clicking on that, AUTO CUSTOMIZING option is disable)
    Please guide me how to configure workflow in this scenario
    Thank you

    Which WF you are using, Leave request WS12300111 and Working TS3100007.
    You can use PFTC and SWDD.
    But WF is already available you just need to attach it to the absences or CATS profile you are using
    in cac1

  • CS4 Suite (all Windows versions) - documentation of XML and pre-configuration of components?

    With a view to packaging and deploying CS4 in Microsoft enterprise environments (ie GPO restricted desktops, mandatory user profiles, non-administrative user base, at or near minimum spec hardware) I was wondering if anyone was aware of any documentation, official or otherwise, for pre-configuration or omission of individual components within the CS4 suite in order to more specifically tailor their operation to user requirements.  Eg, such as the way Adobe provide a transform generator/editor for Acrobat in its standalone form.
    The instructions for performing silent installs with or without the more major components (such as Dreamweaver, Photoshop etc) work fine, and the Adobe CS4 Deployment Toolkit (aka AdobeUberInstaller) deals with a number of omissions in the base installer such ELUA and updates suppression.  However there are various options within the applications themselves I would like to change the defaults for at install time (eg suppress Adobe Bridge from prompting to run at startup, address Acrobat's refusal to run until another element of the suite has been run first etc), patches I would like to slipstream rather than apply retrospectively (currently Air, Indesign, Photoshop), and some elements (such as foreign language components and 64bit support) I would ideally like to omit from the source package altogether to keep the size down - 6GB+ to 500 clients is quite an ordeal!
    Web resources such as application deployment forums have allowed me to address some of the above, but I would be very interested in the feedback/experiences of this community.  I appreciate what I'm asking is somewhat vague but any crumbs of wisdom all add up...
    Many thanks in advance for any suggestions.
    Bill

    The best is to get the versions in which you have developed/tested. These can be found in MAX under Software, if it is possible provide a link to the NI ftp download URL.
    Then export the settings in MAX (for tasks/scales) if you use them and provide a simple app that loads these items into MAX.
    For RIO I'm not totally sure but I would create 'Getting started' that outlines what settings (IP/DNS etc.) to get the user started.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • How to configure Workflow Notification Mailer for oracle alert in R12

    Hi all....,
    How to configure Workflow Notfication mailer for oracle Alert in R12. Please provide the complete steps.. Its urgent.. Plz help me..
    Regards ,
    Madhan

    Duplicate thread (please post only once)
    plz help me...!!!! Workflow Notification Mailer
    plz help me...!!!! Workflow Notification Mailer

  • How Can I pre-configure the proxy settings in Acrobat 8?

    We use a proxy server to authenticate users and it's causing a problem for our e-licensing. Is there a place to pre-configure the proxy settings / login and password for the e-licensing to happen quietly so our users don't have to see it?

    Have you searched the forum for proxy? I do not have an answer, but this has been discussed before. I am not sure there is an answer in the discussions, but it is worth a try. There is likely a knowledgebase article on the issue also. Good luck.

Maybe you are looking for