Re: Regarding Requests to change a user alias / username / displayed name

On Feb 12, 2008 11:43 AM, Eric W. wrote:
"We have seen several requests from users to make changes to their public alias. Unfortunately this is not possible at this time, however we are looking into this suggestion. "
Dear Eric W.:
Is there any update on this request? It is coming up on two years since your announcement was posted. Looking through this forum, this seems to be a very common, frequent and popular request. For privacy reasons, I can see a great need for the ability to change one's alias.
The current alternatives (create new alias, let old one fade away, etc.) are not acceptable.
Please provide an update on the progress of this request.
Thank you.

romad,
This is not a bug, it is a design choice. I have stated that we are looking at this option, but so far the we have not made a decision to change it. We continue to evaluate it, and if there is a change made it will be communicated at that time. Until then I cannot give an ETA because it is possible that this will never change.
Eric W.

Similar Messages

Regarding Requests to change a user alias / username / displayed name

Has there been any progress in developing a way to change the name displayed on discussion posts? I didn't realize my full name would appear on my postings and would very much like to edit this on my profile. The posted answer I found that it wasn't passible to do this goes back to 2008. Any news on this?? Thanks.

Hi,
iChat Can Create new @Mac.com email like addresses and makes them Apple IDs
iChat 4 and 5 link to this page
This page was created after MobileMe started up.
At first it was an @Mac.com name for iChat only
Later it had an option to make it an Apple ID as well.
Now in the last few Months it has become an Automatic step in the process to AN Apple ID as well.
As people don't always want to link all their On-line apps to one ID but also don't want to create more Email address it has become a problem in iChat.
I have raised this issue higher up.
My point is though that you can make an New @Mac.com ID and it is a Apple ID
(I have not looked into changing it to a MobileMe Account linked name at a later stage which seemed to be the middle/previous method).
8:43 PM Monday; December 20, 2010

How can OIM provision users with same Display Name in AD?

I can create users with same First Name, Middle Name and Last Name (same Display Name) in OIM if they have different UserId.
But I can not provision two users with same Display Name to one Organization Unit in AD, the resource provisioning shows
Status: Rejected
Response: AD user already exists
Can AD be configured to create users with same Display Name (different UserId) in one OU, or would I have to create logic in OIM to modify the display name so it gets accepted by AD?
Thanks!

Thanks Nitesh. Also, I can create the user with same DN in different OU's, not in same OU.
I agree once we determine that same cn exists in one OU , I can modify the display name by appending a number at the end or something. I understand the logic but I need more details on how to specify this logic in the pre-pop adapter, can you please share more details.
Thanks a lot!

Changing a user's username programatically

Hi, I'm currently working on a java method to update a user's information on portal. I've been pretty successful using wwsec_oid.update_user_profile, but that doesn't (as far as i can tell) allow you to change a users' username. Is there a better way to change the name a user logs in as?
thanks in advance,
-Rob

Apparently the secret is to change the user's name in LDAP, rather than using a stored procedure. Here's the java code i used:
DirContext ctx =null;
try {
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.ldap.LdapCtxFactory");
env.put(Context.PROVIDER_URL, "ldap://ldapServerAddress:389");
env.put(Context.SECURITY_AUTHENTICATION,"simple");
env.put(Context.SECURITY_PRINCIPAL,"cn=username");
env.put(Context.SECURITY_CREDENTIALS,"password");
ctx = new InitialDirContext(env);
//here's how to rename
DirContext obj =(DirContext)ctx.lookup("cn=Users,dc=,dc=domainb,dc=domaina");
obj.rename("cn=originalName","cn=newName");
//This would be how you would change the uid attribute
ModificationItem newuid=new ModificationItem(DirContext.REPLACE_ATTRIBUTE,new
BasicAttribute("uid","newName"));
obj.modifyAttributes("cn=newName",new ModificationItem[]{newuid});
}finally {
if (ctx !=null)ctx.close();
}

E-Mail Alias or Display Name on bursting?

Hello,
Has anybody tried using e-mail display name or alias in bursting (EBS version)?
<xapi:email server="xxmail.mailx.com" port="25" from="[email protected]" reply-to ="">
<xapi:message id="${XX_ID}" to="${XX_EMAIL}" cc=""
...In the above code, I would like to see the FROM email display(when received) as "My Email Alias" instead of [email protected] Any command to use?
Thanks in advance,
MM

yes - it works:
<xapi:email server="xxmail.mailx.com" port="25" from="My Email Alias <[email protected]>" reply-to ="">
<xapi:message id="${XX_ID}" to="${XX_EMAIL}" cc=""
...

Change the language in the display-name of a train stop

Hello,
does anybody know how to use internationalization in the <display-name> of a train stop?
Bye

Hi,
I use the default model, and when trying to set the Display Name in the View Properties (a train stop), in the train task flow, i can not select a resource boundle key in the expression builder.
If I set something like:
<view id="datosRegistro">
<page>/registro/datosRegistro.jsff</page>
<train-stop>
<display-name>#{viewcontrollerbundle['trainlabel']}</display-name>
</train-stop>
</view>
Nothing appears in the train stop label.
Of course, I have register the resource bundle in faces-config.xml file
Thanks

Creating User Alias in Flash Air Application

I am trying to create an Flash Air application whereby users
are able to change their user alias on the application anytime they
want. This will be saved and when users sign in the application
again, it will show the "new" user alias instead of the previous
one.
Image can be seen below:
http://i192.photobucket.com/albums/z63/nellehs/AirBiff/1copy.jpg
As you can seen in the red box, that is the user alias. Users
is to clicked on the name and they could just change it straight
away. To confirm it, just press the "Enter" button. It works
somehow like MSN. I tired to search for many tutorials online
however there weren't much. Hope you guys can guide me along as I
am still new to Actionscript 3 plus AIR. Thank you so much.

is it possible to do add a user alias in Flash Air
Application?

Creating User Alias

I am trying to create an
Flash Air application whereby users are able to change their
user alias on the application anytime they want. This will be saved
and when users sign in the application again, it will show the
"new" user alias instead of the previous one.
Image can be seen below:
http://i192.photobucket.com/albums/z63/nellehs/AirBiff/1copy.jpg
As you can seen in the red box, that is the user alias. Users
is to clicked on the name and they could just change it straight
away. To confirm it, just press the "Enter" button. It works
somehow like MSN. I tired to search for many tutorials online
however there weren't much. Hope you guys can guide me along as I
am still new to Actionscript 3 plus AIR. Thank you so much.

is it possible to do add a user alias in Flash Air
Application?

I have tried to change my User id which is an email address I no longer want to use. Now I am constantly getting requests from icloud and Apple ID for my password and cant get into my icloud account.

I have tried to change my User id which is an email address I no longer want to use. Now I am constantly getting requests from icloud and Apple ID for my password and cant get into my icloud account.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

CUP: Request type change account- Change of user data other than roles

Hi Experts,
I am using the request type change account to change the user type and/or validity of the user. In the description of this request type it says I can use it to request additional access and other changes to an account. Yet when i try to change user validity.. CUP asks me to select one role when I try to submit the request..
Is there any thing else that I need to do so that the request type works for account changes as well?
Thanks!

Hi,
Go to End Configuration -> End user personlization, select the checkbox next to 'Roles' and click on change. Change the 'Manadatory' dropdown to 'No'. Now, save the changes and create the change request.
Alpesh

When downloading an update from app store, password is requested from a different user. How to change user?

when downloading an update from app store, password is requested from a different user. How to change user?

Unfortunately there's no way around this. you will need that password to update the apps. If he won't give it to you, then i'm not sure what to say.
You should have kept the account with the Apps you bought yourself.
Otherwise, as I said, delete the Apps, and buy them again.
Sorry.

Request password change

Hi, I need to request a password change to a group of users, is there a function or bapi that I can use to request the change?
Thanks

Hi,
Try rhis BAPI 'BAPI_USER_CHANGE' or contact BASIS team.
Regards,
Jyothi CH.

Changing the "Change Manager" User Id on a "Correction"

Good Day;
It seems that the user id we have been using for the Change Manager is a valid user id in our production system.
I am able to change the user id on the Change request, but unable to change it on the correction.
Does anyone have any thoughts on how I might be able to change the "Change Manager" user id on a "Correction"
Regards
Don Newton

hi,
The change manager has a specific role predefined by sap.
If SAP copies from the request into the correction and changes are not possible in the correction it makes sense but if for specific internal reason you want to be able to change it you can do it via the customizing
please follow the following path down in transaction spro
solution manager
configuration
scenario specific settings
change management
changerequest management
extended configuration
change transaction
transaction types
Partner schema
partner determination procedure ==> select the procedure for the correction (SDHFxxxx or Z if you customize it)
Partner function in procedure ==> select the partner function you want to change
click on the change button
you can now change the flag "changeable" of the selected partner function
I hope it helps
best regards Xavier

Ramifications of changing every users SIP address - Everything will break??

Currently we have everyone's meetings set to their AD username, which is also everyone's SIP sign-in address. That was not a very good idea when we started out, as now it will cause us more work because we will soon change everyone's SIP address to
their email address. I think this is easy to do, but....
This will break every single users conferences. Either existing or when they create new ones as it uses the users AD username. We want everyone's meet URL to automatically update with their new SIP account format. Can this be easily powershelled
so the user never notices anything? What other issues could this cause, if any?
Also, everyone will need to re-add all of their federated external contacts. To me this is a minor fix compared to the above.
Also, also, can anyone say what other thinks will break when we make this change? I read up online and the major issues that jumped out where the above. What would be the other major/minor headaches.
Thanks!

Hi net1994,
I’m not sure which field that you will change.
For example:
[email protected]
Scenario 1
I assume you will change the UserName field,
here are some important points to consider however:
a.
As you stated, the scheduled Meetings will be Break. This means that any scheduled meetings would need to be updated so that users are able to join without issue.
b.
The users must use the new SIP address to sign back, and if
the new SIP address does not match the users UserPrincipleName (UPN) in Active Directory, they will be prompted for credentials on sign-in
Scenario 2
I assume you will change the SIPDomain,
here are some important points to consider however:
a.
As you stated, the scheduled Meetings will be Break. This means that any scheduled meetings would need to be updated so that users are able to join without issue.
b.
The users must use the new SIP address to sign back, and if the new SIP address does not match the users UserPrincipleName (UPN) in Active Directory, they will be prompted for credentials on sign-in
d.
(Important) You have to add the additional Sip domain in Lync Topology and publish topology.
e.
(Important) Create DNS records for the new simple URLs, both internal and external.
     •meet.domain.com (external and internal)
     •sip.domain.com (external and internal)
     •SRV _sipinternaltls._tcp.domain.com 5061-> sip.domain.com (internal)
     •SRV _sip._tls.domain.com 443-> sip.domain.com (external)
     •SRV _sipfederationtls._tcp.domain.com 5061-> sip.domain.com (external)
f.
(Important) Request new certificates for the following:
     •Front End Server Certificate (internal)
     •Edge Server Certificate (external)
     •Reverse Proxy Certificate (external)
g.
(It’s not your problem, but it is important too.) Lync will look at your primary SMTP address and attempt to use it to find the EWS URL via Autodiscover after signing in. If the SIP address is different with the Primary
SMTP address, you have to configure additional SRV record for Autodiscover per SIP domain.
Hope this can be helpful.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected].
We are only changing the [email protected] So instead of [email protected], the new sip sign in address will change for everyone to [email protected] = the users current email address. We are not chaining the SIP domain,
that will remain the same.
So besides meetings and federation breaking, any other issues we need to be concerned about?

How to change the application alias for a web project in NW7.2

Hi,
a simple question, but I could not manage to solve it: How do I change the application alias (the url) of a web project? I'm using Netweaver 7.2 and all the tutorials I found refer to earlier versions and do not work anymore.
In particular, I would like to change e.g. "server.com/vendor~webbappname" (the standard url of the web project) to "server.com/mywebapp".
Thanks in advance for your help!

Hi,
Try customizing the <context-root> element in the web.xml deployment descriptor, for example:
<?xml version="1.0" encoding="ASCII"?>
<application xmlns="http://java.sun.com/xml/ns/javaee"
           xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
           xsi:schemaLocation="http://java.sun.com/xml/ns/javaee
          http://java.sun.com/xml/ns/javaee/application_5.xsd"
           version="5">
           <display-name>YourWebApp</display-name>
           <module>
               <web>
               <web-uri>YourWebApp.war</web-uri>
               <context-root>mywebapp</context-root>
          </web>
     </module>
     <module>
          <ejb>YourWebAppEjb.jar</ejb>
     </module>
</application>
Afterwards, rebuild and redeploy your application.
I hope that helps.
Regards,
Yordan

Re: Regarding Requests to change a user alias / username / displayed name

Similar Messages

Maybe you are looking for