Re: Satellite A660 - Intel Graphic drivers & Service Pack 1 installation

Hello, hope someone can help me.
I recently put in a new hard drive in my Toshiba A660 Satellite model No. PSAW3A-15J06T, and after reinstalling Windows 7 (64 bit), Service pack 1 isnt shown as an option in windows upgrade. I read on the microsoft site, that my Intel Graphics HD Driver 8.15.10.2119 would cause this problem and it needs to be updated.
I have had no success in finding the correct driver to rectify this.
In the device manager, the name of the driver is just 'Intel (R) HD Graphics' driver date 21/4/2010, version 8.15.10.2119.
I upgraded my Nividia driver successfully from the Toshiba downloads, but cant seem to find a newer driver for the Intel (R) HD Graphics.
I desperately need the Service Pack 1, and cant just download it from the Microsoft download centre either, because the info says to make sure drivers are up to date.
Can anyone point me in the direction to where I can download the correct Intel Graphics driver. I looked at the Intel site, but its just way over my head.
Hoping someone can help
Karen

Hi Silas, and thanks so much for your quick reply.
Yes, I made the recovery discs prior to taking the old hard drive out, so all the drivers should have been there.
Yes, I agree its strange that it depends on a driver to prevent service pack 1 being an option in windows update, but thats what they said on Microsoft, so I guess I have to believe it.
I must say, this is the second recovery I have done (2nd hard drive in 3 years), and I vaguely remember the service pack 1 taking a long time to come through the first time around (though it was only 3 months old at the time, so different situation I suppose).
As you advise, I'll wait a bit longer to see. I didnt really want to have to put the laptop into a repairshop for them to find the drivers for me.
Thank you,
Karen

Similar Messages

Intel graphics drivers performance improvement

Just a heads up for people looking to get a little more performance from the Intel on CPU graphics...
I noticed that Lenovo has updated the Intel graphics drivers to version 8.15.10.2418: http://download.lenovo.com/lenovo/content/ddfm/MIGR-77280.html
My i5 X220 Win 7 x64 machine had 8.15.10.2342 installed, and I decided to go ahead and install the recent update.
After installing this and rebooting, I re-ran the Windows Experience Index assessment and noticed that the Graphics subscore has moved to 6.3 from the prior 5.9. The Gaming graphics subscore remains the same as before at 6.3. I haven't noticed any day to day difference yet, but perhaps others will.
Note that this update isn't showing up in Lenovo System Update (at least not for me anyway). But you can manually download and install from the link above.

I'm not sure why they would be so different... Are you running on battery? Mine is powered via 65W adapter through UltraSeries 3 base. Mine is a 4286 CTO with i5-2520M (2.5 GHz). I am using UEFI instead of legacy BIOS.
I don't think it should make a difference, but just in case it does, here is more info on my laptop: extra DIMM (3rd party) installed bringing RAM to 8 GB. BIOS 1.20. mSATA SSD (MyDigitalSSD 64 GB) is startup disk, but ProgramData and Users are on 320 GB drive. Both drives use BitLocker drive encryption (via TPM). The system takes a long time to post (at power on and with reboot) due to Lenovo's problems in the firmware. OS is Win 7 x64 Ultimate. The X220 lid is closed. The laptop is connected to a 1920x1200 display via DisplayPort-DVI adapter
After the computer rebooted I waited a few minutes for Windows services to settle down before starting the WEI assessments.

Satellite C660-1KW - graphic drivers issue

Hi,
I cant find graphic drivers for my tosh. I try search it on intel site but they send me here
plz help

*@mumoftwins*
> I think I need this update for my Satellite C660-1LD as I'm having problems running certain programs.
There is no big difference between the version 8.15.10.2353 and 8.15.10.2189 and therefor I doubt the installed driver might be the reason why you have problems running certain programs.
> Should I be saving the new version somewhere specifically or does it instinctively know where to go (can you tell I'm not very techy?)
Download the package, save it somewhere on the HDD (I prefer desktop), unzip the package (you can use software like WinRAR or WinZip) and then run the setup or install exe
Follow the instruction on the screen and then reboot the notebook. Now the driver should be updated.

Toshiba Satellite Pro A10,Windows XP Service Pack 2

Hi everyone,
I have a "Toshiba Satellite Pro A10: P4-M 2.2 GHz/XP Pro/15" TFT/40 GB/768 MB".
I installed the Windows XP Service pack-2 in my notebook.
After updating to winXP SP2, the only way to start up my comp after putting it in "standby mode" or "hibernation mode" is to witch power off and then start up.
I reinstalled "Toshiba Power Saver" but nothing came of it.
What can i do about it?
Kind regards,
Krasteff

Hi Krasteff
Your problem is difficult. If I had it, I'd try to make the status of the OS as clean as possible.
Try killing as many of the funny SYSTRAY applications as possible - means the small icons in the SYSTRAY. Some of them will not be killed that easily. Don't spend hours trying...
Then also try killing any, as You mentioned, antivirus or other services that are not necessary for the system. Check also that You do not have any USB / PC Card devices attached to the system.
Then try again.
Works better? Then "walk backwards" means try attaching the devices / starting the applications one by one and retry Hibernating. Keep track of what You reconnect/restart so You know what You did last when the system fails to start up again. There You have the cause of the problem and then You also know where to look for the solution.
Hope it helps!
BR Tom

Satellite A660-047 - Missing drivers for WAN Miniport

I have a Toshiba Satellite A660-047 PSAW3C-047017 running Windows 7 Professional 64-bit.
I just downloaded the ISO for Norton Ghost 15, created the installation CD, installed Ghost, and ran the driver validation from the installation CD. I got the following message:
> The following devices do not have drivers in the Symantec Recovery Disk.
>
> WAN Miniport (IKEv2)
>
> A detailed information about these devices is given below
>
> Description : WAN Miniport (IKEv2)
> Class : Net
> Class Guid : {4d36e972-e325-11ce-bfc1-08002be10318}
> Hardware Id : ms_agilevpnminiport
> Hardware Id : MS_AgileVpnMiniport
From a bit of googling, it seems it is more of a higher level interface than an actual hardware device. I'm not really sure what it's used for, or how likely I will miss it in the event of a recovery. Is this something I should spend time worrying about right away?
The thread http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/wan-miniport-sstp-driver-problem/f83493ae-8127-47dd-a7b7-7e5b3460b6a6 says it's not needed in "most cases" but I was wondering if any exceptions might be encountered during recovery (when I would like to use WiFi to surf and restore my system to non-factory state, as well as to do diagnostics on a possibly bad HDD).

By the way, would anyone know where to get the driver? I would prefer to get it from a Toshiba or Microsoft site, but the laptop driver download page for my model at Toshiba Canada doesn't list anything containing "wan" or "miniport".
The thread http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/316bec01-01c4-433a-95cb-a0b5b2359beb how to transplant the relevant part of the registry, but I would like to avoid mucking with the registry if possible. I would feel much more confident about having a driver that can be installed by more conventional means (if there is such a thing).

Satellite A660 - Cannot find drivers for Win 7

I have a toshiba satellie 07u machine. but i cant seem to find drivers for this on toshiba site for any other model...when i chose "computers" on suppport page it doesnt let me chose the satellite.......please help
this is the driver page......
http://www.mytoshiba.com.au/support/notebooks/satellite/a660/psaw3a-07u00r/download?os=25
Thanks

Wait a moment!!!
Have you read what I wrote in my last posting? As you can see on this page you can search for drivers choosing your notebook model or using model/part number. Have you checked this second option?
Does it work for you?
Have you tried to open this page using different browsers?
For instance, using IE9 I have the same problem but Opera or Chrome it works properly.
Check it out.

Windows XP Service Pack 3 Installation Failure on new Mac Pro

I'm unable to install service pack 3 on the windows xp installation I have on my Mac. The error dialog says "additional 4 megabytes of storage required". The error is erroneous - there's 80 GB free on the windows C: partition where it is attempting to use during the installation process.
Google searches reveal that boot camp version 2.1 is required to install sp 3. I've already installed the boot camp drivers from my new machines OS X install disk (which was quite new at version 10.6.4). Presumably these boot camp drivers are version 3.1 or 3.2.
After the SP3 install failed, I tried downloading and install 2.1 (hoping to install SP3 then progress through the series back up to 3.2). The 2.1 boot camp installer does nothing when run. Perhaps it's logging some info somewhere but I don't know where in windows to find it.
Boot camp 3.2 requires 3.1 as a pre-req. Boot camp 3.1 says the installation of 3.0 is required as a prerequisite. I can't find a copy of 3.0 out there on Apple's site.
I know XP is old but I don't dare run it without SP3 as there are at least dozens of security fixes in that patch if not hundreds.
Google searches also turned up that there is a fabled registry fix that will get rid of the "4 megabytes required" error but I wasn't able to find the specifics of that registry fix anywhere.
Any suggestions out there ?

Trouble with SP3 are numerous, though not 100%, sometimes it just wipes out an entire drive.
On Mac Pro, you have to remove all the other drives before starting the install.
Rather than XP, there is Windows 7 which has more and better security.
Ignore Boot Camp 2.0, the "or later" should be in there and of course Macs come with 3.0.x anyway.
You can't install any drivers that affect Windows until after Windows is up and running.

Windows XP Service Pack 2 Installer

So I have a relatively simple application. I it just reads and writes CAN data using a Vector CANcase USB CAN device, and these drivers. I developed the source in LabVIEW 2012 SP1 in Windows 7 x64. I built the EXE and it works fine, I then made an installer. Under the Additional Installers I only included the NI LabVIEW Run-Time Engine 2012 SP1 f9. I unchecked all the components under it because I knew I didn't need them.
I tested the installer on my XP SP3 machine and it worked great. Then another user wanted the software and had XP SP2. I tried the installer and it said it requires XP Service Pack 3 or newer. So I opened the project I used to make the installer, and under the "System Requirements" it already had the oldest option selected which was Windows XP Service Pack 2 or later.
My solution is to update the PC and it is in the process of doing that right now. So for me this is fixed, but is this an issue? And anyone else that sees this issue you aren't crazy.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Yes, I've had the same problem. I believe it had something to do with .NET (on which some NI components rely?) only being supported by XP SP3.
If you read here - it mentions that the latest service pack may be required for some operating systems.
The one thing that is weird is that the 2012 LV Runtime apparently supports all service packs of XP but the 2013 Runtime only supports SP3. Actually, looking at the download page for the 2012 SP1 F9 runtime it says it only supports XP SP3 so during one of the updates they must have changed the minimum requirement.
Maybe you could try installing an older version of the LV2012 runtime which works with SP2?
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

Office 2013 with Service Pack 1 installation error about "search path"

I have an automated installation technique that has worked fine with Office 2010 Pro Plus (32-bit), incorporating the latest Service Pack into the network administrative installation point (under \updates), adding 10 foreign languages to the network administrative
installation point, creating a custom .msp with the OCT (that goes into \updates too), editing the config.xml files, and then running setup.exe from that network administrative installation point. This works on 32-bit Windows XP clients and on 32- and 64-bit
Windows 7 clients.
For Office 2013 Pro Plus, I have built the network administrative installation point exactly the same way (original DVD files + languages + SP1 updates + config.xml updates), but the installation is failing with every type of client, all with
the same error message. The network administrative installation point is readable by the normal installing account, but I even get the same error when I login as me and initiate setup.exe manually, and I have all rights to this point.
Here's the critical point from a log file:
2014/03/11 11:53:49:691::[2372] DistributionPoint parsed. The distribution point is now set to: \\archive.ads.college.edu\archive\KBOXalt\Office2013
2014/03/11 11:53:49:691::[2372] COMPANYNAME specified in config.xml.
2014/03/11 11:53:49:691::[2372] USERNAME specified in config.xml.
2014/03/11 11:53:49:800::[2372] Setupexe Resiliency Mode is set to [PerformIfApplicable]; thus Resiliency is [disabled] for the [InstallExecutionMode]
2014/03/11 11:53:49:910::[2372] Searching for default versions of resource files under the folder [\\archive.ads.college.edu\archive\KBOXalt\Office2013].
2014/03/11 11:53:50:019::[2372] Error: GetDirectories: search path \\archive.ads.college.edu\archive\KBOXalt\Office2013 does not exist
ErrorCode: 0(0x0). Failed final attempt to load a setupexe resource file.
2014/03/11 11:53:50:019::[2372] Error: GetDirectories: search path \\archive.ads.college.edu\archive\KBOXalt\Office2013 does not exist
Type: 34::InvalidDirectory.
2014/03/11 11:53:50:019::[2372] WER element [SuppressModal] is set to value [true]
2014/03/11 11:53:50:019::[2372] WER element [P4] is set to value [InvalidDirectory]
2014/03/11 11:53:50:019::[2372] Catalyst execution finished: 03/11/2014 11:53:50. Return code: 30034. Exception caught: InvalidDirectory.
2014/03/11 11:53:50:019::[2372] PERF: TickCount=894821 Name=RunSetup Description=End function
I cannot find any references to this exact error anywhere on the Internet. Can anyone tell me what this means, and how I fix it?

As automated, the utility that runs setup.exe maps a drive letter to
\\archive.ads.college.edu\archive\KBOXalt using a kboxmap AD account, which has read access to the whole \KBOXalt tree. I used that same kboxmap AD account manually to simulate what the utility does, and hit the same problem. But here's what's
odd: right next to that
\\archive.ads.college.edu\archive\KBOXalt\Office2013 directory is an
\\archive.ads.college.edu\archive\KBOXalt\Office2010 directory, both created the same way, and the Office 2010 installation has always worked perfectly using the kboxmap AD account. I don't understand why Office 2013 is only working for an account with
read/write access, where Office 2010 worked fine for an account with only read access. Especially when the Office 2013 resource kit documentation clearly states that the account running the installation should only have read access, nothing more. (All this
KBOX stuff comes from the fact that our deployment environment is a Dell KACE KBOX 1000. However, that plays no part in the problem: ignoring the KBOX 1000, I can manually recreate the problem every time.)

Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12

Hello,
I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
1. Service Pack installation failed with error code 0x800f0a12.
2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
Please suggest

Please run the system update readiness tool.
http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
Then post the complete contents of;
%SYSTEMROOT%\Logs\CBS\CheckSUR.log
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Crystal Reports Service Pack 1 installation

I am trying to install service pack one for crystal reports 2008. It downloads, and starts the install, but says it cannot find crystal_reports.msi, which is not in the dowload folder. I have to cancel, and it backs everything out. How do I get around this?

I first installed SP0, and now SP1 installs correctly

Windows 7 Service Pack 1 installation

HI,
When i deploy Service Pack1 for windows 7 via SCCM, it gets installed in client machines. But when they restart, they are not getting the message "windows 7 service pack 1 is now installed" while logging in. But OS version is changed and in the
ARP, it shows the entry. When i login in the same machine (my ID has admin rights), this message is showing up.
Problem is when i target this machine in IE 9 collection, it is not getting deployed till the time i login in the client machine and click close in the message box. please suggest me what we should do to resolve this.
Thanks in Advance.
Regards,
Raja

How did you deploy the SP1? via SUP or Software Distribution？ What version does the System Properties show if you use the normal user's credential to open it? If it does show Windows 7 with SP1. It means the SP1 is installed successfully.
I assume the pop-up is just a reminder to tell us the SP1 finishes installing and somehow it needs admin or system account credential so that the normal user cannot see it.
Juke Chou
TechNet Community Support

Weblogic 6.1 Service Pack 3 installation

I am upgrading weblogic 6.1 service pack 2 to service pack 3. Everything goes fine, except that after the installation the weblogic server says the license is expired. If i uninstall the service pack 3 it works fine. Since i have inherited this application, I am not sure where the license file is. I found a weblogiclicense.xml file in the web-inf directory. Can i use this somehow. Any help would be greately appreciated.
thanks,
-faisal

Try saving the license.bea file somewhere, install the SP, see if a different
license.bea is there and replace as necessary.
Why stop at SP3? Why not go up to SP5?
Wayne Scott
Faisal wrote:
> I am upgrading weblogic 6.1 service pack 2 to service pack 3. Everything goes fine,
> except that after the installation the weblogic server says the license is expired.
> If i uninstall the service pack 3 it works fine. Since i have inherited this
> application, I am not sure where the license file is. I found a weblogiclicense.xml
> file in the web-inf directory. Can i use this somehow. Any help would be greately
> appreciated.
>
> thanks,
>
> -faisal

SQL Server 2008 Service Pack 1 installation problem

I am using Windows 7.
Today I saw "Microsoft SQL Server 2008 Service Pack 1 (KB968369)" as an optional update in the updates list. I've tried to intstall it but it failed with Code CF2E222F. I found nothing about this code on the internet.
I've also tried to install the sp manually. I've downloaded it an tried to install. But it also failed.
SQL Server Setup has encountered the following error: C:\Windows\Installer\9bcac.msi.
Any suggestions?

Here's the summary:
Overall summary:
Final result: The patch installer has failed to update the shared features. To determine the reason for failure, review the log files.
Exit code (Decimal): -819060177
Exit facility code: 1838
Exit error code: 8751
Exit message: C:\Windows\Installer\9bcac.msi
Start time: 2010-04-28 10:10:14
End time: 2010-04-28 10:11:02
Requested action: Patch
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100428_100952\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.2531.0%26EvtType%3d0x4C9229A1%400x2FCB8C55
Machine Properties:
Machine name: MACHINE_NAME
Machine processor count: 4
OS version: Windows Vista
OS service pack:
OS region: Türkiye
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Database Engine Services 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER SQL Server Replication 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Full-Text Search 1033 Developer Edition 10.0.1600.22 No
Sql Server 2008 MSSQLSERVER MSAS10.MSSQLSERVER Analysis Services 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 MSSQLSERVER MSRS10.MSSQLSERVER Reporting Services 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 RETAILSTORE MSSQL10.RETAILSTORE Database Engine Services 1033 Developer Edition 10.0.1600.22 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services 1033 Express Edition 10.1.2531.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication 1033 Express Edition 10.1.2531.0 No
Sql Server 2008 Management Tools - Basic 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 Management Tools - Complete 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 Client Tools Connectivity 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 Client Tools Backwards Compatibility 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 Client Tools SDK 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 Integration Services 1033 Developer Edition 10.1.2531.0 No
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 1
KBArticle: KB968369
KBArticleHyperlink: http://support.microsoft.com/?kbid=968369
PatchType: SP
AssociateHotfixBuild: 0
Platform: x86
PatchLevel: 10.1.2531.0
ProductVersion: 10.0.1600.22
GDRReservedRange: 10.0.1000.0:10.0.1099.0;10.0.3000.0:10.0.3099.0
PackageName: SQLServer2008-KB968369-x86.exe
Installation location: g:\2aa334eee83bd39b499730\x86\setup\
User Input Settings:
ACTION: Patch
ALLINSTANCES: False
CLUSTERPASSIVE: False
CONFIGURATIONFILE:
HELP: False
INDICATEPROGRESS: False
INSTANCENAME: <empty>
QUIET: False
QUIETSIMPLE: False
X86: False
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.IO.FileNotFoundException
Message:
C:\Windows\Installer\9bcac.msi
Data:
DisableWatson = true
Stack:
at Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetDBProperty(ServiceContainer context, String pathToMsi, String propertyName)
at Microsoft.SqlServer.Configuration.MsiExtension.SetPatchInstallStateAction.GetMsiRtmVersion(PackageInstallProperty targetPackage)
at Microsoft.SqlServer.Configuration.MsiExtension.SetPatchInstallStateAction.IsApplicablePatch(PatchProperty currentPatch, PackageInstallProperty targetPackage)
at Microsoft.SqlServer.Configuration.MsiExtension.SetPatchInstallStateAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Configuration.MsiExtension.ProductInstallProperty.GetInstalledPackages(String instanceName, List`1& installedInstancePackages, List`1& installedSharedPackages, String& returnedErrorMessage)
at Microsoft.SqlServer.Configuration.MsiExtension.ProductInstallProperty.CollectProductData()
at Microsoft.SqlServer.Configuration.FeatureTreeConfigurationBase.LoadFeatureTreeDefinitionAllInstances()
at Microsoft.SqlServer.Configuration.FeatureTreeConfigurationBase.LoadFeatureTreeDefinition()
at Microsoft.SqlServer.Configuration.FeatureTreeConfigurationBase..ctor(ServiceContainer context)
at Microsoft.SqlServer.Configuration.PatchFeatureTree..ctor(ServiceContainer context)
at Microsoft.SqlServer.Configuration.PatchFeatureTree.InitializePatchFeatureTree(ServiceContainer context)
at Microsoft.SqlServer.Configuration.SetupExtension.InitializeUIDataAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)

Satellite A660 - Bluetooth Detection of Service Failed

Hi,
Having a funny issue, yesterday my laptop blue screened when I turned bluetooth on.... and ever since then i havent been able to connect my mouse back up.
I have tried un installing and reinstalling the toshiba bluetooth stack and still nothing.
everytime I try to connect I get the error "Detection of Service Failed"
any help would be appreciated

The reason is the bluetooth device, but driver and everything is up to date.
Deinstalling all drivers and reinstalling doesnt fix the problem.
Many others have the same problem, there are many posts in the www.
Bluescreen hints:
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
0x1000007e
ffffffff`c0000005
fffff880`069b7a5a
fffff880`04f838e8
fffff880`04f83140
tosrfbd.sys
tosrfbd.sys+2ca5a
And here is the answer (in german) of the Toshiba support they are very professional
Wir schlagen Ihnen vor, zu prfen, ob die der Bluescreen auch bei Anbindung einer Kabel-gebundenen Maus auftritt. Bitte prfen Sie auch, ob der Hersteller der Bluetooth-Maus Bluetooth Treiber bzw. eine Bluetooth Umgebung fr das auf Ihrem Notebook installierte Betriebssystem anbietet.

Re: Satellite A660 - Intel Graphic drivers & Service Pack 1 installation

Similar Messages

Maybe you are looking for