Re-setting date on Photosmart 7510 Printer

When I print a Printer Status Report for ink levels, the "Ink Install" date is wrong by minus 5 days each time.
From this I deduce that my printer's internal date is wrong by minus 5 days.
I have searched high and low for "setting" and "re-setting" the date - but to no avail.
The HP Helpdesk is useless
Thus I am "Very Dissatisfied". can anyone help ?
This question was solved.
View Solution.

Hello,
Please try the following steps:
1. Press Setup (Wrench icon)
2. Press Tools
3. Press Date & Time
4. Press Change, and then select your region
5. Set correct time, and then press Ok
6. Enter correct date. and then press Done
Thank you
I was an HP employee.
Kudos are appreciated if I have helped you.

Similar Messages

After a network interruption, my photosmart 7510 prints pages with a "d" on them.

After a network interruption, my Photosmart 7510 prints pages with a "d" on them. I have Windows 7. There is no error message on my computer. When I check "See What's Printing," nothing is shown.

Hi rosegirlmom,
Does this only happen when the router is reset?
Why is the router getting reset?
Have you tired using a different router to see if this stops the issue?
Restore Network Defaults:
On the printer control panel, touch the Wireless icon ( ).
Touch Settings .
Touch and then slide your finger up on the display to scroll to Restore Network Defaults .
Touch Restore Network Defaults .
Touch Yes to confirm your selection.
Restart the printer, and then connect it back to your network.
You may need to run the Update IP address icon located in the HP folder in All Programs to update the computers with the new IP address assigned to the printer.
Let me know what happens?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Unable to print borderless 4x6 photos with the Photosmart 7510 printer.

I am unable to print borderless 4x6 photos with the Photosmart 7510 printer. There are no option listed for any size borderless printing when i choose the paper size and paper type. I am running Windows 7 Home Premium 64-bit.
This question was solved.
View Solution.

I found it. Once you hit print, click on the options link. It opens a separate window. In that window there are two links, one says color management and the other says printer properties, click printer properties. That opens a new window, in that window click the advanced button. That opens a new window titled HP 7510 Advanced options, under the printer feature section near the bottom you will see "Borderless Printing". Left click on that and to the right a drop down menu opens, select borderless, hit ok. After you do this, it will print borderless however you will still NOT see that option when you print, like you used to with the older HP printers. I couldn't find it in the help section, I just stumbled upon it, very frustrating! It will print borderless.

Compatibility of using Photosmart 7510 printer with a Photosmart 7525 printer from the same computer

Before installing, registering, and setting up my new HP Photosmart 7525 I need to know whether I can keep using my 2 year old HP Photosmart 7510 and its software on my computer and whether this would cause a conflict. My 2 year old Photosmart 7510 works fine and I want to use the Photosmart 7510 and the Photosmart 7525 both from the same computer and network without conflict. And if a conflict would be probable, is it necessary to remove the Photosmart 7510 software before installing the software/drivers for the Photosmart 7525?

Hi,
You can install more than 1 printer to your computer. They will share few folders including HP Photo Creations product but they should live harmony together.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Photosmart 7510 printer wireless connection to Mac Book Pro

My new HP Photosmart 7510 wireless printer won't stay "connected" to my Mac Book Pro. Every time I try to print, it says it is "looking for printer" and "printer is disconnected." Sometimes it finds the printer and I get the pages, but several times, it hasn't found the printer at all. Thanks!

Hi there clhs,
Could you provide the community with a little more information to help narrow troubleshooting? How are we connected to the printer USB/Wireless/ethernet?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

My new HP all in one computer was recently connected to our new Photosmart 7510 printer. It worked

I own a one month old HP Omni 220 PC (all in one). The operating system is Windows 7. It is connected to wi-fi network in the home. The Internet portion works fine. And, for about 30 days, it would print to our new wi-fi connected HP Photosmart 7510 just fine. Today, it will not print. Our other computers connected to the network print just fine. So, it's not the printer, or the wi-fi. Can you tell me what might have happened within my PC, and what I need to do to fix the problem? I tried restarting the PC, and the printer but that didn't fix the problem. There have been no recent changes to the software or hardware configurations.
Thanks,
Bill

you have to file the music file if you dont itunes cant play a file that does not exist. check the get info and look for the old music file on your old computer. Or do this http://support.apple.com/kb/ht4527.

On a photosmart 7510 printer , where do i select to print in black only.

On my Photosmart 7510 where do I select to print in black only.

Hi there,
Welcome to the forum! What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

My Photosmart 7510 printer only prints in black even when grey scale is turned off.

Hello
I am having issues with printing in color. I have a 7510 Photosmart Printer. It has full ink cartridges, I made sure grey scale is turned off, I uninstalled and reinstalled it but it still prints in black. It looks like it is using shades on the of black like its trying to darken the colors that would be there if it printed them. It just recently started doing this. What do I do?
Thank you
EDIT: I am using Windows 7

Hello @Oldsheep , and welcome to the HP Forums!
I see you are experiencing print issues. I would like to help!
Does this issue occur when making a copy as well?
I would recommend removing the ink cartridges, and performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend this document on Fixing Print Quality Problems for the HP Photosmart 7510 e-All-in-One (C311) Printer Series.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Wirelessly connecting HP Photosmart 7510 printer to 64-bit Windows 7 computer

I'm setting up a new printer, and I have never printed wirelessly before. The printer is connected to the wireless network, but the computer can't find it. The printer's wireless network test results show that wireless is working. When I install the HP photosmart software on the computer, and it gets to the "Network Check" window, it just stalls there without finding any printers. Obviously, the computer is connected to the wireless network because I'm posting this online. Seems like the problem is with the printer driver software? I also tried downloading the Home Network Diagnostic Utility. From there I was able to go to the printer page and print a test page. However, I still can't print anything from the computer. If I try to add a printer in the control panel, when I search for network printers the same thing happens. It just stalls there without finding anything. Using task manager to end the program is the only way to close the window once it gets stuck. Any ideas?

AN IMPORTANT UPDATE!
I had turned off my virus protection and firewall, and was still unable to connect to the printer, or ping it.
I could successfully ping the printer from my router, so I turned the router off and back on, re-configured the wireless setup on the printer, and I am able to connect and print again!
Even though I could connect the printer to the router, and all of my computers were connected to the internet, something on the router was preventing me from connecting to the printer that was connected to the same network.
So I've learned that I have a printer that works fine, but I own a crappy router. Hopefully this can help someone else.

Photosmart 7510 Prints the text offset to the right

I use MS Word 2010 and when I print text it appears offset 7 mm to the right. e.g. Left margin set at13 mm starts printing at 20 mm, and Right Margin set at19 mm stops printing at 12 mm. The same offset appears when using other applications e.g. Publisher, Zara, Photoshop etc.
The Top, Bottom, Header and Footer print accurately in the correct position.
Off course, I can adjust the margins to compensate for this error, but this is a bit of a nuisanse and offends my sense of rightness! I have had this printer for 3 years and the problem appeared right from the first day. I have other HP Printers but they do not display this problem. My Printer is directly connected to the computer via USB.
This question was solved.
View Solution.

Hello X-23
I have run the 'Align Printer' Tool as suggested, and am pleased to report that this has successfully resolved the issue; a print of one of my documents now positions the text on the page with the correct set margins. I am grateful for your help in resolving this proble for me; keep up the good work!
Unfortunately, I now have to go through all my templates restoring the correct settings but "Hey Ho!"
Being very long in the tooth, I am inclined to not use on line documentation unless I print it out, but this can be an expensive business these days! However, since applying a few of the suite of programmes held in the printer, I have become a lot more confident in using these features, so that is a bonus for me!
With Regards
GreatSimms

Can't Connect Photosmart 7510 Printer to Wireless Network

This printer isn't new, but it's new for me (my mother gave it to me). However, I'm trying to set it up, and I can't get it to connect to a wireless network. When I go into the Wireless Network Setup on the printer, no networks are listed (even though several should be listed, mainly our home network). I tried entering the network information (name & password) manually, and it still didn't work. I've downloaded drivers and all, but I can't complete anything because while the printer is powered on, it's offline. I don't know if the drivers just don't work because I upgraded to Yosemite within the past few weeks (and the drivers are for the OS prior to that one), or what. I can't even begin printing because I'm dealing with this nonsense...

Did everything you said to do, and still had the same issue. The Wireless Network Test results say the following: WirelessWireless Working - FAILSignal Quality - Not Run ConnectivityConnected - Not RunDisconnect count total - 0Disconnect count (last hour) - 0Disconnect count (last 24 hours) - 0 NetworkNetwork Name (SSID) Found - Not RunOther networks detected matching your network name (SSID) - NoWireless Networks Detected - 0 SettingsPrinter Settings Consistent with Wireless Router Settings - Not RunNo Filtering - Not RunChannel - Not RunSecurity - Not Run

How do I get efax to automatically print an incoming fax? I am using a Photosmart 7510 printer

This question was solved.
View Solution.

Issues Resolved By Fix:
Can't Send eFaxes
Can't Receive eFaxes
Can't Login to eFax on the front panel of the printer.
Can't Register eFax on the front panel of the printer.
When trying to access eFax, it says that the printer is not connected wirelessly.
When trying to access eFax, it asks that you enable web services before continuing.
The Fix:
First, press the ePrint button in the top left hand corner of the screen on your printer to access the Web Services menu.
Once there, press the “Settings” button.
If ePrint is turned on, turn it off and then back on. Press the return button and then press “Print Report”.
If ePrint is turned off, turn it on. Press the return button and then press “Print Report”.
These steps might sound strange since the issue is with eFax, but eFax works on the printer through the ePrint service.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Photosmart 7510. Unable to find printer

I am trying to set up a photosmart 7510 All in one. I am on Windows Vista 32 bit. My wireless network test results are fine. Everything says PASS and my signal quality is EXCELLENT. My Network Configuration Page says status is READY and my Active Connection type is WIRELESS. I am able to print from my phone using Eprint. I am able to open the printer apps on the printer so I know I have an internet connection. When I try to print from the computer I get an error message that says UNABLE TO FIND PRINTER. i have disabled my firewall, uninstalled my anti virus protection just to see if that helps. I changed from IE9 to IE8 but still doesn't work. The last 2 days I have about 6 1/2 hours on the phone with HP and an engineer will be calling me on Monday. It's driving me nuts. Any help would be greatly appreciated.

On this page look at the Print Diagnostic utility, and maybe the Network Diagnostic utility:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02554863&cc=us&dlc=en&lc=en&product=5070121&tmp...
If you haven't already, that is.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

PhotoSmart 7525 printer/Can't get a code to set-up eprint

When I try to get a code to setup eprint, I get a message saying I need to upgrade. When I accept terms and tell it to automatically update, I get an error message saying there is no internet connection.
When I run a report, it says the internet is connected.

HI ButterflyWV,
Welcome to the HP Support Forums. I see that you are getting a connection error message when trying to enable the web services of your Photosmart 7525 printer.
Please set a manual IP address and manual DNS servers for the printer. I have included a link to another post that has the steps, with screen shots, on how to do this. Please don’t fret that the screen shots are a Photosmart 7510 printer, the steps are the same.
Have a good weekend.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP Photosmart 7510 efax set-up

I have set up my HP Photosmart 7510 printer to operate wieless. I can print and I can write this message, but I can not register for efax because the printer panel says that I am not connected to the internet.

OK, the printer does not like the Westel DNS service - this is pretty common with DSLroutetrs.
Let's set a static IP address with an external DNS for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Re-setting date on Photosmart 7510 Printer

Similar Messages

Maybe you are looking for