Re-Transport erroneous requests in ChaRM

Hi All,
What is the best way to re-transport the request which wasn't transported due to some error (say RFC error) while importing requests from DEV server to QAS server etc.?
1) To transport manually by unlocking through SCMA
2) Re-transport through SCMA (Execute where the Red bulb is blinked)
3) Any other way?
Best Regards,
Nayab

Hello Nayab
I think you can find the answer in a SAP note
General charm note:
Note 907768 - General note for Change Request Management ST 400
Declare import error as corrected
Note 1498588 - SCMA: declare import error as corrected (Repair Flag)
I don't know for sure if it's applicable for you but if it's not please go through the list of SAP notes of SAP note 907768 to check if a relevant SAP note exists for your issue.
Kind regards
Tom

Similar Messages

Error when importing a Transport request in CHARM???

Hi all,
when i am trying to import a transport a request( thru CHARM) , its throwing an error " No valid system specified (Q11)" and "Import error: Check TMS Alert Viewer in target system"
Note::I was able to create a Transport request , release it but facing problem while importing to quality system.development system is ECC5.0 and quality is ECC6.0
rgds,
Anand

HI abhi,
i havecreated the domain link, my ECC5.0 and ECC6.0 are in one domain of which ECC5.0 is domain controller,now i configured Solution manager as new domain controller and created a link between these two domains...
now my queries are:
1.is it enuf if i create a link between or even shud i create som transport routes between the newly added system from other domain and the existing domain
2.i am not able to see the STMS configuration in solution manager system.ie in my ECC5.0 system( domain ctrller)if i goto STMS->Overview menu-> transport routes i see the configuration, which i cannot see by logging into solution manager and wentto STMS->Overview menu-> transport routes i dont see
rgds,
Anand

Merging Java Transport request with Abap Transport Request in Charm

Hello All,
We have activated the Change request Management in Solution Manager. Therefore transport request of type workbench and customising can be created when you choose action 'Create Transport Request'.
However we have some SAP systems that have CTS+ integrated which allows to generate transport request number and attach objects in PI Integration Directory - java transports.
Question is - Is there a way we can integrate the java transports generated in these SAP systems with Solution Manager CHarm and transport creation.
Or can we assign the java transports to charm in any way.
We are basically looking for how when users create Charm, the abap and java transports relating to the charm are generated and created only from Solution Manager manager or how these two transports can be linked together in Solution Manager.
Thanking you in advance for your help.
Tolly

Hello Friends
I have read the links and followed the instructions and tried to create object
TABLENAME R3TR TABU and tried to save it.
I keep getting a warning message
Note: ZTABLE1 is an application table
Object TABU ZTABLE1 has object function "k", but no key.
(I don't know what key to enter. I tried the Key field name, but it said 'Enter Numeric values only').
If I ignore and save and try to create transport request and then import it on a different server, again only table structure is getting transported and not the contents/data of the table.
I would appreciate if some one can please let me konw what I am doing wrong.
Thanks
Ram
Edited by: Ram Prasad on Jun 2, 2009 3:38 PM
Edited by: Ram Prasad on Jun 2, 2009 3:40 PM

CHaRM-Handling old transport request before CHARM was activated.

Hi All,
Recently i just activated CHARM in solman-SM1 for new a project implementation. This CHARM was setup in in such a way that it tie to one of the local IMG project EPROJ in developmemnt-DEV. Now i have one concern and that is those transport requests where created before i activated CHARM.
These old transport requests were crerated directly in DEV without project assigned. Therefore, we tried to assign IMG project EPROJ (the same IMG project setup in CHARM) into those old transport request manually.
Problem : When i tried to perform released step in CHARM tasklist it says that "No transport request found"
Question : How do i make CHARM to pickup those old transport requests?
Really appreciate your feedback as there are a lots of old transport request which needed.
Thank you.

Hi,
If you use Change Request Management, you should always use Change Request Management means to create transport requests; that is, create transport requests in a change transaction or in the task list.
Manually registered transport requests can be assigned to a task list only, not to a change transaction. If you use change transactions ,,,,the system does not take into account transport requests that you added manually.
This note is what you want
Note 1150426 - Registering transport requests in ChaRM
Hope it solve ur problem completely.
Regards
Prakhar

Error in transporting request through charms

Dear Experts ,
recently refreshed my quality systems data with production data ..and finished successfully, but we did not take any screenshots before doing refresh in quality
my problem is we already configured charms in solution manager to transport requests to production system ...
now we are not able to transport request through charms .. because rfc connections are changed in quality ...
please let me how can i recollect quality rfc connections for charms ...
i dont have idea about charms configuration to reconfigure in quality.... please help in this
Regards

Hi,
You need to transport the ODS 1st and then the transformation.
The main reason for most of the transports to fail is:
1)Transporting each and every object in the same transport request.
Ideally,
          u2022The Infobjects should be transported first in a separate request.
          u2022Then the Data source and the Info providers (Cube, ODS, Data source and Multiproviders) together in a separate request.
           u2022At the end the transformations and the DTPu2019s in an another separate request.
If the above mention sequence is followed while transporting the transport failures can be avoided.
2)Also when a change is made to an ODS (I object added or deleted) it should again be transported along with the transformation but in separate request.
I.e. the ODS 1st and the transformation.
hope this helps.
Regards,
Mahesh

How to Configure Transport MAnagement system in CHARM

Hi
How to Configure Transport MAnagement system in CHARM? Here our requirement is when ever a change request approved in the background Transport request should be created automatically. We have configured all the Transport Routes in our lanscape.
Can any one tell me the detailed process? If you have any Configuration document please share it to me
Points will awarded for helpful answer
Thanks
Bhaskar

In a two system landscape is it necessary to make development the domain controller always?
No such compulsion as such exist(correct me if wrong),however why you want to make production your domain controller?
This is not recommended.
Regards,
Ashutosh

ABAP Query transports not handled by CHARM

Hi,
How should ABAP query transports be handled in CHARM??
The ABAP query transport tool doesn't allow picking a transport that is already created (Own transport), it creates a new transports which is outside of CHARM. I had to assign the objects in the transport manually to the appropriate CHARM transport.
Any ideas???
ABAP query don't seem to be using the standard transport tool.
Thanks
Stephane

Hi
Instead of assigning the objects you can directly assign the trasnports to the charm task list of the project
check q22 (registerting transport created outside of charm)
Change Request Management scenario: Usual questions and known errors
hope it clarifies
regards
prakhar

Error while transporting the request from quality to production of BI

Dear all,
When transporting a request (which contains elements of correction - in Bex designer) from quality to production of BI the following error is displayed and the request transport fails. Can the experts throw some light on this.
 Execution of programs after import (XPRA)
 Transport request : RBDK904992
 System : RBP
 tp path : tp
 Version and release: 372.04.04 700
 Post-import methods for change/transport request: RBDK904992
 Post-import method RS_AFTER_IMPORT started for ELEM L, date and time: 20080406140407
 Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
 Error when activating element EY2CXLKXP5X5AY0RQ2XKN9EX8
 Element 5E4II2344I3JG4R6ACMYQ441Z is missing in version M
 Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
 Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
 The errors affect the following components:
 BW-WHM (Warehouse Management)
 Post-import methods of change/transport request RBDK904992 completed
 Start of subsequent processing ... 20080406140407
 End of subsequent processing... 20080406140408
 Execute reports for change/transport request: RBDK904992
 Reports for change/transport request RBDK904992 have been executed
 Start of................ 20080406140408
 End of.................. 20080406140408
 Execution of programs after import (XPRA)
 End date and time : 20080406140408
 Ended with return code: ===> 8 <===
Thanks in advance.
Regards,
M.M

Hi,
First try to figure out the object type from the text obtained by following steps above.
Goto Development server ,create fresh request (using transport connection) , transport to QA and then in to production.
After successful transfer of the request for this object ,try to reimport the request which caused error and it should go smoothly without any error.
Hope it helps.
Regards
Mr Kapadia

Error generated while transporting a request using TMS

Dear Techies,
While transporting a request iam getting an error message
"Transport control program tp ended with error code 0247"
Errors: add to buffer has problems with data- and/or cofile
Iam not getting any information to resolve the problem. Further In devlopment system iam unable to see the old requests and also new one whcih i have created and released. I tried adding the request manually in TMS, whcih resulted in the above mentioned error.Please suggest some solution

are you able see the objects when you are expanding the request/task
Also please check the followings & let us know the result
1. Goto transaction STMS. Menu verview -> Systems. Select system and Menu Check --> All available option
2. Goto transaction STMS. Menu verview -> Transport Routes, Menu Configuration --> Check --> All option
One more thing are you facing this problem with only for one specific request or for all requests
Edited by: Mrinal Das on Jan 5, 2011 3:10 PM

Error while transporting a request

Hi,
I am transporting a request having infoobjects into a quality server.
while transporting its giving error as "Changes cannot be made,display user only".
but when i checked into Quality server changes has already been made and corresponding related objets like update rules are inactive....
so can i consider this request as successful transport??
and if transport is successful then why it is giving such kind of error,....because previously when i have transprted it never gave such error.
Thanks in advance.

Hi,
Transport is not sucessful to Quality system. you donot have sufficient authorization for transporting objects or system is locked for any changes.
contact BASIS person. and because of this infoobjects (infoobjects used inupdate rules, infoprovider...all are in deactive status).
check all objects in developement system and create new request and check request before transporting.
Regards
Daya Sagar

Warning MSG : while Transporting a Request to Production

Hi Friends,
 I got folowing errors while transporting a Request to Production -
PART 1 .
+++++++++++++++++++++++++++++++++++++++++++++++++
 NBA Quality Assurance
 Selection for Import 03.05.2006 11:56:02 (0) Successfully Completed
 Import ABAP Dictionary Objects 04.05.2006 08:56:08 (0) Successfully Completed
 ABAP Dictionary Activation 04.05.2006 08:56:14 (4) Ended with Warning
 Import 04.05.2006 08:56:34 (0) Successfully Completed
 Check Versions 04.05.2006 08:56:47 (0) Successfully Completed
 Import steps not specific to transport request
 NBP Nobel Production System
 Selection for Import 04.05.2006 08:56:35 (0) Successfully Completed
 Import ABAP Dictionary Objects 27.06.2006 13:55:12 (0) Successfully Completed
 ABAP Dictionary Activation 27.06.2006 13:55:15 (4) Ended with Warning
 Import 27.06.2006 13:55:36 (0) Successfully Completed
 Check Versions 27.06.2006 13:55:51 (0) Successfully Completed
 Import steps not specific to transport request
++++++++++++++++++++++++++++++++++++++++++++++++++++++
PART 2 - LOG
ABAP Dictionary: Activation
Transport request___: NBDK923224
System______________: NBA
tp path : tp
Version and Release: 340.16.09 640
Program start============================================================
Mass activation
=========================================================================
Process..................: nb13_21
User.....................: DDIC
Date, time...............: 04.05.2006, 08:56:13
Platform.................: CUSTOMER-NBA(620)/DB6/AIX/nb13
Tool.....................: BATCH/RADMASG0
Log......................: F, /usr/sap/trans/tmp/NBDA923224.NBA
Program parameters:
Input medium...............: Transp. request NBDK923224
Activation method..........: Inactv.
Chk. mode..................: T
Version to be activated....: M
Versions to Be Deleted.....: Delete only active versions
Lock against paral. exec...: Shared
Independent statistics log.: being written
Parallel mode..............: Switched on
..Resources................: 50% of Dialog Processes, Maximum 4 Processes
.Costs for Each Task.......: Minimum: 3.000, Maximum: 150.000
=========================================================================
No object to be deleted and activated exists
 =========================================================================
 Mass activation
 =========================================================================
 Process..................: nb13_21
 Return code..............: 4
 Program runtime..........: < 1 sec.
 Date, time...............: 04.05.2006, 08:56:13
 Program end==============================================================
 ABAP Dictionary: Activation
 End date and time : 20060504085614
 Ended with return code: ===> 4 <===
=========================================================================
 Mass activation
 =========================================================================
 Process..................: nb13_21
 Return code..............: 4
 Program runtime..........: < 1 sec.
 Date, time...............: 04.05.2006, 08:56:13
 Program end==============================================================
 ABAP Dictionary: Activation
 End date and time : 20060504085614
 Ended with return code: ===> 4 <===
Can any one tell me why this ? what is the impact of it ??

hi,
you must extend the log complete, than you'll see the
object, which caused the error.
RC = is only warning:
All the objects were transported successfully.
Peculiarities occurred for certain objects. These might
not have been intentional.
Example: A warning is given during a transport if the request contains an object deletion. ...
A.
Message was edited by: Andreas Mann

How to find out if a transportation/accomodation request has been changed?

Hello all,
I need to know if one transportation/accomodation request has been changed after being created. I am using the TRIP standard transaction to plan the travel request without any external agency integration.
My problem is that if I change any field of one travel request such as: begin time, city from, destination or whatever, I cannot
find any field or table that lets me know there has been a change.
I am using an user exit that triggers once you have pressed the "Save" button, but there is no info about the travel requests. There is info about the cluster of the trip, but not about the travel requests. Only the FTPT_REQUEST database gives me this information, but only the final one, so I cannot compare the previous values with the last ones.
Can you please help me with this topic? I don't know how to solve it.
Thank you very much in advance.
Best regards.

Hi,
you can use trace event ST01 or using SAP standard workflow.
as per standard workflow WS20000050 for travel request, while in travel request workflow for approval there is task of "wait for event" that could know if you are changing your travel request it will flow to stop workflow and start it again.
for details, maybe you could see sap workflow SWDD and open workflow of WS20000050.
hope it helps.
thanks.

Transport a request from one server(quality) to another server(production)

Hi All,
I want to transport a request from one server(quality) to another server(production)
Can we transport a request from quality to production programatically i.e. by using programing logic.
Regards,
Swarup

Hi,
It cannot be done programmatically. Although it can be automated by basis guys. They configure it in TMS (Transport Management System). You can check it using STMS. (if you are authorized to view it).
Transport path are defined in TMS.
For Automated Transport configuration is done in TMS.
Generally automatic Transport are not setup between quality and production. Changes are first tested in Quality and then Transported by basis team either periodically / individually.
In case of manual transport Transport Request can be imported in production using STMS_IMPORT transaction in production. (Basis guy will do it for approved Transports)
If there is no direct connectivity - Basis people copy "data" file and "co" file and Transport it to target server (This is generally not the case in Quality - production as Transport path is always defined).
Regards,
Mohaiyuddin

Prompt for transportable Workbench request

Hi experts,
I want to create a web service, and let my asp.net program call it.
I input se37 in ECD, and input zzz_yyyy_xxxx as function module, then click "create" button.
In the next step, I need input "Function group", but I have not , so I need crate one.
In the "Create Function Group" dialog, I input "Function group" and "short texst", and click "save" button. It takes me to "Create Object Directory Entry", I input "Package" ,then press "Save"button again.
Now it takes me to "Prompt for transportable Workbench request" dialog. Now I need input "Request" and "short description".
I'm confused. What do I input as "Request"?
Thanks.

I am guessing you are quite new to this? It is asking you to create a transport package which can be sent to quality or production systems later on. If you do not want to do this you can click local object and it stays in development server. Otherwise you click the page icon and then type a description of the work/program you are creating. Save it and it will generate a transport package for you.

Can we transport a request from .....

Hi all,
can we transport a request from AIX OS, database DB6 ,BW 3.5 to a BW 3.5 which is on system Linux/Oracle.
Thanks for your valuable time.
Regards
Bob

Hi,
in theory that shouldn't be a problem, but it will still depend on what kind of objects you want to transport, in particular how the DB objects will be generated....
Olivier.

Re-Transport erroneous requests in ChaRM

Similar Messages

Maybe you are looking for