Re: trasport error datamart infopackages

Dear all expert,
While I transport infopackages under datamart i getting this error
Object 'DM' (APCO) of type 'Application' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name 'DM' (in transport request APCO) of type 'Application' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
please guide me
Regards,
Jagadish

Hi,
Just check if the data mart object is present in the target system or not.
Or if the object itself is active or present in the target system or not??
go to infosurces option and search for it begining with 8* followed by the object name.
If not then generate the object again.
but you can create the infopackage in the target system directly.
Thanks
Ajeet

Similar Messages

Data Source Error in infopackage level

HI experts,
Please guide me to resolving this issues.
When I am trying to load CSV dta through infopackage and when i clicked preview button , it is throwing an error.
Error : Data source DS_PROFIT not available in source system of Avtive Version A.
This data source created by me.
Please help me.
Regards,
subhendu

pls activate your data source first then try to preview the data...........
Edited by: JAIGUPTA on Jan 12, 2012 10:16 PM

Error in infopackage level routine

hi guys
I am trying to write a infopackage level routine for dynamic flatfile selection.Im getiing error:Error 1 while loading external data.
I did like this:
I am accessing one external harddisk having BW-R3 software installed in it through VM Ware from my laptop.here I saved one flatfile with name DFF_10.10.2009.csv in D drive.so path becomes -- D:\DFF_10.10.2009.csv
then in my infopackage...i wrote code ..here it is
DATA: XFILE LIKE P_FILENAME .
CONCATENATE 'D:\DFF_' SY-DATUM '.csv' INTO XFILE .
P_FILENAME = XFILE .
now tried to schedule infopackage....to see if it worksand loads data from flatfile.....but it throws error....Error1 while loading external data....
how can I fix this?
Thanks in adv,
Rgds,
S

DATA:
ch1(32) TYPE x VALUE
'00200120022003200420052006200720082009200A200B200C200D200E200F20',
ch2(32) TYPE x VALUE
'10201120122013201420152016201720182019201A201B201C201D201E201F20',
ch3(60) TYPE c VALUE
'¿ ° ± ² ³ ´ µ ¶ · ¸ ¹ º » ¼ ½ ¾ ¡ ¯ ® ¢ £ ¤ ¥ ¦ § ¨ © ª « ¬ '.
DATA:
ch4(90) TYPE c VALUE
'ø ÷ æ ß ? ? ? ? ? ? ? ? ? ? ? ! ~ ` #'.
FIELD-SYMBOLS: TYPE c.
DATA: l_ZPWRKCTY TYPE /BIC/OIZPWRKCTY,
      l_ZPSTNAMe TYPE /BIC/OIZPSTNAME.
l_ZPWRKCTY = SOURCE_FIELDS-FIPS_NAME.
translate l_ZPWRKCTY to upper case.
     RESULT = l_ZPWRKCTY.
CONDENSE RESULT.
Exclamation mark is not permitted as a first symbol of the field
content
IF RESULT(1) = '!'.
    RESULT(1) = ' '.
ENDIF.
CONDENSE RESULT.
The only # sign is not permitted
IF STRLEN( RESULT ) = 1.
    IF RESULT(1) = '#'.
      RESULT(1) = ' '.
    ENDIF.
ENDIF.
Replace Invalid Characters by SPACE
ASSIGN ch1 TO .
TRANSLATE RESULT using ch3.
TRANSLATE RESULT using ch4.
CALL FUNCTION 'SCP_REPLACE_STRANGE_CHARS'
    EXPORTING
      INTEXT                  = RESULT
   IMPORTING
     OUTTEXT                = RESULT.
Remove leading and trailing blanks if any
CONDENSE RESULT.

Error in InfoPackage, however monitor is ok

Hello,
When you run a process chain in synchronous mode, an error occurs in the Info Package (already occurred with several random objects), but the monitor to check the infopackage that is beginning with an error, I notice that the performance is ok.
Someone has seen something ?

Hi Bruno,
Go through the link below and I hope this may helps u
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Regards
Sudheer

Error in Infopackage

Hi,
when i am executing a chain, in one infopackage i am getting following error, please provide answer Asap.
Job started
Step 001 started (program RSPROCESS, variant &0000000184088, user ID BW_USER)
Deltas already loaded for request REQU_4E53BPUP5EU67LXZFPVRBH89Q init. selection; no 2. init
Entire chain now has status 'R'
Process Construct Database Statistics, variant Stats Updt ZFCO_C00 has status Undefined (instance )
Process Delete Index, variant Delete Index COPA Account Based IC has status Undefined (instance )
Process Data Transfer Process, variant ZFCO_D00 -> ZFCO_C00 has status Undefined (instance )
Process Data Transfer Process, variant 1_CO_PA_INC0 / ZEACLNT200 -> ZFCO_D00 has status Undefined (instance )
Process Generate Index, variant Generated from DROPINDEX ZFPRV_DI_ZFCO_D00_01 has status Undefined (instance )
Process Activate DataStore Object Data, variant Activate Data ZFCO_D00 has status Undefined (instance )
Process Start Process, variant TR_CO_PA_00 3 Hours Data Refresh has status Completed (instance 4GQ39TSEVC1WEW36438VTWR9Y)
Process Execute InfoPackage, variant 1_CO_PA_INC0_DELTA has status Ended with errors (instance REQU_4GQ39XUCVLID8SCP6YHD4Y2VQ)
Process Execute InfoPackage, variant 1_CO_PA_INC0_DELTA has status Ended with errors (instance REQU_4GL4DKWCPRONLZ2LQ6Q84NQQM)
Job finished
Regards
jain

Hi,
Please check your CO-PA infocube have error . It seems like some error in init and hanlde carefully . one thing you need to careful 0sd_c01, CO-PA its very important because daily sales report have developeed on these infocube.
Regards
Sivaraju

Error in InfoPackage: Error when uploading Flat Files

Hello Experts,
I encoutered this error in Info Package when uploading a flat file.
When i try to click on the "Preview" button, this errors appear:
"Error 8 when compiling the upload program: Row
237, message: Data Type / BIC/ CCCBMA1_COCTR2 was found in a newer"
Please help to advise what is this error about and how to resolve this?

hi Annie,
run RSA1 and try again
Error when compiling the upload program (Message no. RSAR233)
other similar problem solved by run program(SE38)RS_TRANSTRU_ACTIVATE_ALL and relogon
A newer version of the data type error when loading
Flat File Preview error message
Error when loading from Flat File
Error message when previewing data in InfoPackage
hope this helps.

Error in Infopackage- retrieve error data

Hello experts,
During execution of infopackage to extract data from ECC i had this error : "Error in codepage mapping for source system" read some thread i understand there was some idoc in error therefore i found the problem in BD87 in source system and i have processed my idocs correctly.
NOW: i have again in the log my infopackage in error and after this execution i have many other executions correct so the delta extraction, after that problem, contunue in right way.
My question is: how can i manage the data that went in error? the infopackage with error extract 2400 record where are these record?how can i retrieve these records?
thanks
kind regards
Boris

Hi,
After you processed your Idocs in BD87, your subsequent loads went successful. So, now there is no Idocs problem as such.
For your missing records, run a Repair Full load by specifying the data selection. Then it will bring all the missed records.
Regards,
Suman

Techincal Content Trasport Error

Hi,
We are done Techincal content Installation in BI Dev system trying to move the objects Dev to Q system it causing the error message in Trasport like this "Error when activating DataSource 0TCT_DS01 BICLNTXXX"
Thanks

Hi,
U have to check whether the object is in active version or not
and include them in the grouping and collection mode and then install them
Pls try the same it will come fine
Settings for material number conversion not found
Assigning Points is the way of saying Thanks in SDN

Unusual error in Infopackage

Hello Experts,
I am getting an unusual error while executing the infopackage for CO-PA extraction. I ran the IP for init with data transfer using controlling area and fiscal period as the selection criteria but the Infopackage returned a error "System could not find a source of data that could perform the search". However, when I run RSA3 for the same selection criteria, it does returns extracted records.
I am quite confused by this and will appreciate any help in this regards.
Thanks,
Rishi

Hi,
Init with selections in the Info Package is not Possible
Remove selection and Initialize the Delta it will work
Regards
Hari

Process chain error at infopackage

Hai
Im trying to load the data from flat file into DataStoreObject by uisng process chian in BW-2004s.
I build the process chain like below
start -> InfoPackage -> DTP -> Activation Of ODS data.
Im gettin error at the Infopackage level and it becomes red. I already loaded data into the datasource/psa in BW-2004s.
So how can i look for the error details at infopackage process level.
pls let me know
kumar

Hi,
just right click on the process which got fail means red in color, and details ... >details ....there must be given you some errors find out ...you can find the solution ...or else you can just let me know that error i may solve that .. all the best.
Regards,
vishali.

BI.7 error in Infopackage run

Hi
We are on BI.7 and try to load Masterdata for first time in Quality system .
We occurs the same error :
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_RSR_X_MESSAGE
just after run
Same problem occurs on transactionnal datas , on full or delta.
RSA3 is OK .
Flows are activated .
Any ideas ?
Thank you for your help.
Dh

hello ,
nothing found in ST22.
here is it .
thanks for your help .
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_RSR_X_MESSAGE
Date and Time          30.08.2007 17:07:49
     adequately responded to, the running ABAP program 'SAPLRRMS' has to be
     terminated.
Error analysis
     An exception occurred which is explained in detail below.
     The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
      and
     therefore caused a runtime error.
     The reason for the exception is:
     No text available for this exception
Missing Handling of Application Exception
     Program                                 RSAWBN_START

Hierarchyt - trasport Error

Hi,
When transporting user defined hierarchy info source to producion Tranfer rules are not getting activated which is required to load hierarchy to create.
But I am able transport same to QA system sucessfully without any problem.
Error: "Tranfer structure is not active" tried all options.
Below is transport fail message.
"Mapping between data source ZLOCALID_HIER and source system A_LOCAL_PC is inconsistent
InfoObj. 0STARTLEVEL from fld STARTLEVEL of dataSource ZLOCALID_HIER is not active but BCT ex. -> Dtl"
I did not find info object 0STARTLEVEL any where in the system.
Please help me to solve this problem to move this to Production system.Very Urgent ..Thanks in advance.
Kiran

Hi Vijay,
can you have a look on SAP note 1562136 and 917084 ?
Hope it will be hopeful.
Regards,
Mukesh Pandey

"Error Occurred in the Data Selection" while excuting InfoPackage for DataSource(ORT_PA_TRAN_CONTROL)

Hi,
Can anyone help me out with the data selection error in InfoPackage, while I was trying to extract the DataSource(0RT_PA_TRAN_CONTRL) to BW./
I've tried with "Init With Data Transfer" and without the use of Conversion Routines.
Thanks,
Taehoon.

Hi,
Why your using conversion routine at info pack level?
Actually conversion routine already defined for info object 0MATERIAL, general tab.
at info pack level, remove conversion routine MATN1 and don't give any selections.
First try to run data source at source system RSA3. if it works then later you can trigger at info pack level without any selections.
Thanks

InfoPackage error 8...?

Hi Experts,
Could you please explain about infopackage errors,like infopackage error 8,error 4,etc,.
Thank u
Reddy.
Message was edited by:
Jangareddy dasari

Hi,
Goto Tcode SU01 for that user you need to go to the Logon Data tab and check what is the User Type. Is it currently Communications in your system? You will need to make it System
Please go through link
Error when i was creating a process chain
Error-no 8 with process chain
It would help you.
Regards
Prasad

Process chain gives error when activating

Hi,
I created a process chain, nothing spectacular. I am going to fill a Cube using an infopackage, this is a delta update infopackage.
Anyway, so my process chain is done and I activate it, and I get the following error message:
"InfoPackage ZPAK_EY32OUHBC7FOBBX70AUJWSVE3 is generated; NOT able to be used as loading variant"
So what is this? I am not allowed to use this infopackage? I have to create a new one?
In the production system the cube has already had a delta-init and some delta updates, using the above mentioned info package. The updates are scheduled in jobs, but we are setting up process chains for this. So does this mean I cannot use that infopackage, have to create a new one, do a new init and then run deltas with a different infopackage?
On the test system there was no problem, though I should note that there was no delta info package yet and I created one myself.
Has anybody seen this before?
Kind regards
Ina

Hi Erik/Ina,
When you are including InfoPackage in a process chain, make sure that these are not the ones generated by the system in the datamart process. Please create you own InfoPackages for full and delta load as reqd (like for when loading from ODS to cube, or cube to cube, or ODS to ODS: all data mart scenarios), and then include these in your process chain. It should be fine.
Hope this helps...

Re: trasport error datamart infopackages

Similar Messages

Maybe you are looking for