Reactivation of Info objects

Hi Friends,
We have activated some datargets and the info objects used in these data targets go reinstalled and the versions of the Info objects dont match with that if QA ad Production , who do I get back the same version of my infoobjects as Production , Is there any report which I can run to comapre the differences between Dev and Prod, How can I retain my old versions of Infoobjects ?
Any inputs greatly appreciated.
thanks in advance .

Hi
To know the difference between infoobjects in DEV and PROD systems is login into both systems
SE16---->RSDODSOIOBJ>DATATARGET-- u get the list of objects in the ODS and if Cube
SE16--->RSDCUBEIOBJ>DATATARGET---u get it
U can compare together
if u want to activate the particular object than use
SE38----->RSDG_IOBJ_ACTIVATE -
>INFOOBJECTS
Regards
Sridhar

Similar Messages

Mass Info Object(s) Activation

Hi Team,
can some one tell me where can I do the activation/reactivation of the info objects in mass, I guess
there is a program/FM exisits for this purpose. pls. do share the same.
<Please do not solicit points for answers - it is discouraged >
Regards.
Edited by: Arun Varadarajan on Nov 25, 2008 5:28 PM

Dear Nasiroddin,
Run the following prg to activate a set of infoobjs at a time.
Goto se38:
RSDG_IOBJ_ACTIVATE
click F8
Or u can also check this...
You can do this in RSD1. Select 'all info objects', go to Inf objects --> Activate all.
Also another way of doing this...
you can select multiple info objects by pressing ctrl key and selecting the infoobjects, then drag and drop in right hand side all the selected infoobjects will be activated together.
Hope this helps u..
Best Regards,
VVenkat.

Error while creating info object

error while creating info object a character
Info object may be a maximum of 000060 digits...... what would be the error?
Thanks ALL

Hi,
The maximum length supported by one CHAR type infoobject is 60. Check whether you have assigned more.
If you have to load more length ( more than 60) split the total thing into different infoobjects. Create different infoobjects and split the total thing into them - like 1st 60 char in 1st infoobject, char 61-120 in 2nd infoobject and so on. Then you can again concatenate them.
Thanks,
Indrashis

Error while activating the info object.

Hi,
While activating one of the info objects, i am getting the following error message:
Characteristic 0BP_GRP: Cannot switch off InfoProvider property
Message no. R7B289
Diagnosis
The characteristic receives master data from other objects (for example, transformations or update rules). Therefore it is necessary to select the characteristic as an InfoProvider.
Procedure
If you want to deselect the Characteristic Is InfoProvider indicator, delete the corresponding objects in the data flow.
Thanks and Regards
Niren.

Hi Niren,
Check the below thread..
Howto Remove 0Employee Char from my InfoArea
Hope it helps..
Regards,
Ramki.

How to activate the Info object catalog in Business content

Hi,
While trying to activate the Info object catalog, I found that some of the info objects under this catalog was earlier activated by some other developer. I brought this catalog (0SALES_CHA01) over to the Business content activation panel ( with only 'necessary object settings ) and all the info objects that also came along were de-selected since I didn't want to install those again). When I tried to install these I get an error indicating that some of the info object in question are not already active.. and ultimately the catalog doesnt get activated , although more than half of its infoobjects are already active under the '0CHANOTASSIGNED' node.
Please let me know whether I can get only the Catalog activated without getting any existing activated info object merged or installing those which are not already activated.
Thanks
Arunava

Hello Arunava,
Just drag the infoobject catalog as u did earlier to the left in the bus cont installation screen with "only necessary object" option.
Dont try to deselect any object. Go ahead with the default options and install in background.
Now you can check for the available objects in the catalog. if you have some objects missing, and available in unassigned node,double click on the newly installed infoobject catalog, select the required objects (which are not yet assigned to this) from the left side and bring them to the right side.
this will make the unassigned objects assigned to the required catalog.
Hope it helps..
(please dont forget to reward points to helpful answers)

BI end routine at transformation to populate info object by vlookup attribu

Hi ,
I am APO consultant working in Bi routines and I have the follwoing situation and need some guidance in ABAP code (routine) .
We sales info from markets as flat filea snd lod them into cubes. One of the filed is file is External sales Group: ZEXSGRP. This is an attribute or Sales Group info object ZSLSGRP.
We get external sales group populated in file when we upload the file into cube - I want to use end routine to vlook up the info infoobject table ZSLSGRP - all the external sales groups and use the matching value to write Sales Group (ZSLSGRP).Example if ZSLSGRP is NAM and it attribute is ZEXSGRP and has value N0000032. The file gets value N0000032 so the end routine should look all attribute of all infoobject ZSLSGRP and match the value and populate in example above it populates NAM.
Hope i am clear - can any help with this.
thaks
Varma

Replace your select statement ,
SELECT *
FROM /BIC/PZF31SALOFF
INTO CORRESPONDING FIELDS OF TABLE it_tab4.
instead of selecting all the fields , pick only the fields which are required.(one good performance improvement)
SELECT /BIC/PZF31SALOFF comp_code
FROM /BIC/PZF31SALOFF
INTO CORRESPONDING FIELDS OF TABLE it_tab4.
Remove the line below , this is not required
MODIFY it_tab4 FROM wa_tab4.

Adding new info object to a cube.

Hi Friends,
This is a BI SYSTEM, we have a cube with existing data in it. Now we need to add a new info object to the dimension of the cube.
Now we can add the info object to the cube in 2 ways.
1. remodeling the cube
2. select the cube in RSA1 , RIGHT CLICK, IN CHANGE MODE add the info object to the dimension of the cube.
now my question is why we have the concept of remodeling, when we were able to add the info objects to the dimensions of the cube in the change mode.
kindly explain me in detail.
thanks.
Please search the forum
Edited by: Pravender on Mar 16, 2011 2:58 PM

Hi Soumya,
If you go by option 2 of adding Infoobject in Cube by going in change mode and adding the respective Infoobject in Dimension,
Then you have to delete Data first from the Infocube in order to add infoobject by this option. Otherwise it won't allow you to add infoobject.
But by remodelling option you can add the infoobject in dimension without deleting any data from Cube. But this option has its own limitations too.
Please refer the following link for Remodelling Concept:-
http://help.sap.com/saphelp_nw04s/helpdata/en/58/85e5414f070640e10000000a1550b0/content.htm
Hope it helps.
Regards,
Hardik

Info-Object data not appearing in Multiprovider

Guys,
I got a problem here. I have created a multiprovider based on master data and cube. My master data has certain attributes which are not present in the cube. I want to display data for those fields in the multiprovider.
I can see cube data in the multiprovider view but i don't see any data coming from the master data info-object. 0INFOPROV shows only cube name.
Is there something i am missing or any setting that i need to do ?
Points will be awarded to the helpful answers.
Thx,
Soumya

Hi All,
Multiprovider always has issues when you are trying to link two objects vary in their structure. Lets say if you are creating a multi-provider on a ODS object & Cube or Cube & Info-object. Lets say CHAR X is available in Cube and not in ODS or master data.
Any selection on char X will not fetch you any record from ODS / master data as it is not available in ODS / master data. You need to add the characteristic to ODS / master data and update the same way as you are updating it in the cube. Otherwise don't make any selections based on this characteristic.
Hope it helps.
Thanks
Soumya

Goods receipt number and purchase invoice nubember info objects

hi experts
i have the requirement to build the report with the info objects of goods receipt number(document) , purchase invoice numbers and purchase document numbers from standard cubes or ods.i have checked in inventory management and purchasing cubes&ods i am not success got the purchase document number it is from ods (0PUR_O02) the InfoObject is 0OI_EBELN(purchasing document number),like this i want InfoObject for Goods receipt number and purchase invoices from where can i get these fields.
if u need any more information i will provide.
thanks and regards
Sreenivas.

Hi Ahamed,
thanks for your reply,do u have any information about purchase invoice number.
i need one more help from you, how to find out Debtors turnover ratio from Acceount Receivables(AR) (or)G/L (General ledger account).is there any standard queries from Business content,i was checked and i was failed,if you have any solution for this please let me know.
thanks and regards
Sreenivas.

" COMBINING TWO INFO-OBJECTS ! "

Hai Friends ,
I am having 2 info-objects : Info-object1 - length 60, Info-objec2 - Length -30. I have to combine these two Info-objects . Let anyone know me the procedure forcombining these two Info-objects : Info-object1,Info-object2 .
Waiting for your reply .

Hi,
Create the infoobject which contain the string.
if CHAR1 is 30 and CHAR2 is 60, your new infoobject should be 90.
In the transformation/update rule you concatenate the two infoobject.
Concatenate is a function which is available in the formula builder, no ABAP needed
In the Routine you reference at the uploaded Data with:
concatenate COMM_STRUCTURE-infoobject1
COMM_STRUCTURE-Infoobject2
into RESULT.
Thanks & Regards,
Vipin

How to use ZMATERIAL info object attribute in existing report

Hi all,
         Using generic extraction we have created data source related that data source we have created navigational attribute for
info object ZMATERIAL. Data available for ZMATERIAL info objects. Now ZMATERIAL info object related navigational attribute
want to use in existing report.
For eg. Already sales report developed in that 0MATERIAL only using now i required to use ZMATERIAL also in that report
My requirment is ZMATERIAL related navigational attribute want to use in exisiting report, how to do that? kindly guide me.
Thanks

Goto CMOD
Enter the projname
select component
click on display
--seelct the Fm EXIT_SAPLRSAP_002
-- double click on include program to insert your code double click on ZXRSAU02
Enter your code below
CASE i_datasource.
Sample code ...
WHEN '0MATERIAL_ATTR'.
    LOOP AT i_t_data INTO lt_mara.
      l_tabix = sy-tabix.
      SELECT SINGLE ZCOMP ZSUPP ZPUBL ZIMPR ZFORM ZSUBJ ZSDET ZAUTH ZREDT ZPUDT ZADAT
              INTO (lt_mara-zcomp, lt_mara-zsupp, lt_mara-zpubl,
                    lt_mara-zimpr, lt_mara-zsubj, lt_mara-zsdet,
                    lt_mara-zauth, lt_mara-zpudt, lt_mara-zADAT)
             FROM mara
             WHERE matnr = lt_mara-matnr.
Endloop.
Regards
KP

How to use the Compounding Key in BPC10NW like BW info objects?

Hi experts.
We are longing the suitable solution in BPC-NW 10.0 to deal with compounding key like BW info objects.
We want to define the dimension with compounding key MATERIAL and PLANT, but BPC-NW 10.0 doesn't support it. Therefore we just defined the dimension "PLANT" as entity and "MATERIAL" as user-defined dimension with concatinated key "Material code-Plant code" as ID.
For instance:
-[Dimension PLANT] as type-E (entity)
ID
1000
2000
3000
-[Dimension MATERIAL] as type-U (user-defined)
ID        ENTITY MATNR
1000-AAAA 1000   AAAA
1000-BBBB 1000   BBBB
2000-AAAA 2000   AAAA
2000-CCCC 2000   CCCC
3000-BBBB 3000   BBBB
3000-CCCC 3000   CCCC
(ENTITY and MATNR were defined as properties, and ENTITY filled the each member including dimension Plant)
Now we built a input form with following conditions:
-Page axis : ACCOUNT=Revenue, etc...
-Row axis : ENTITY=1000 or 2000, MATERIAL=all
-Column axis : TIME=Jan, Feb, Mar...
The result report came out as follows:
Revenue
PLANT MATERIAL   Jan Feb Mar ...
1000   1000-AAAA 0   0   0   ...
1000   1000-BBBB 0   0   0   ...
1000   2000-AAAA 0   0   0   ...
1000   2000-CCCC 0   0   0   ...
1000   3000-BBBB 0   0   0   ...
1000   3000-CCCC 0   0   0   ...
2000   1000-AAAA 0   0   0   ...
2000   1000-BBBB 0   0   0   ...
2000   2000-AAAA 0   0   0   ...
2000   2000-CCCC 0   0   0   ...
2000   3000-BBBB 0   0   0   ...
2000   3000-CCCC 0   0   0   ...
But we expected to have a report restricted MATERIAL with their property on specified PLANT in member selector such as:
Revenue
PLANT MATERIAL   Jan Feb Mar ...
1000   1000-AAAA 0   0   0   ...
1000   1000-BBBB 0   0   0   ...
2000   2000-AAAA 0   0   0   ...
2000   2000-CCCC 0   0   0   ...
How do we obtain the expected result? Please give us the good solution!
Best regards,
Masa

Hi Vadim.
GREAT! Our requirement is fulfilled by that way you described. Special thanks for your help!!!
Best regards,
Masa

Error in char. Info Object

I have created the char . info object and in attributes gave the same char. and made it as navigational attribute. when i am trying to activate the info objecty i am getting the error
    "Name of the Characteristic is Reserved".
Can nyone plz let me know how to resolve it.

Hi,
   Could you be a bit clearer? If you created a chrarcteristic infoobject and added the same in the attributes then its not possible and wrong.
An attribute must be a different infoobject.
For eg.
CHAR        ATTr
MATID       MATTYPE
You cannot have
MATID as the attribute of MATID.
Regards.

Error in transporting info-object

Hello Experts,
We need to a import an info-object from Quality to Prod.
From Dev to Quality the transport was successful, but while transporting from
quality to prod we are getting the following errors:
Changes cannot be made, display user only
And as a result the info-object and hence the info-object,transfer rules/Transformation etc are
now inactive in the prod. enviornment.
Could anyone advice on what may be the source of this error??
Thanx and Regards
Priyanka

Hi Priyanka,
Pls check below threads, may be it will helpfull to you.
https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6758914
https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6720353
https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6407281
https://forums.sdn.sap.com/click.jspa?searchID=21045906&messageID=6758914
https://forums.sdn.sap.com/click.jspa?searchID=21045906&messageID=6407210
Thanks & Regards,
Ramnaresh .P.

Error in transpoting info object

Hello,
Need help to solve this please!
I am getting an error while tranporting an info object!
Error 1 with function module RSDRX_FILL_INITIAL_PQTABLE (Fill Master Data)
Message no. R7195
Diagnosis
Possible causes:
Function module DB_CREATE_TABLE
There is not enough room in the table space.
Procedure
In this case, check the logs on the database and extend the table space if it is too small.
Help me please!
Regards
RAm

Hello,
Help me to solve this !
I cant transport the info object !
It says:
Function module DB_CREATE_TABLE
There is not enough room in the table space.
Procedure
In this case, check the logs on the database and extend the table space if it is too small.
Help me!!
Regards
Ram

Reactivation of Info objects

Similar Messages

Maybe you are looking for