Read IDOC Posting Status (Inbound ACC_ACT_ALLOC03)

Greetings,
I am working on XI and just developed a file-to-IDOC interface for cost allocation, they interface pushes 100s of ACC_ACT_ALLOC03 IDOCs into R3 and they get posted.
What is the best way to report the posting status for those IDOC other than going to WE02 and checking each IDOC individually
Many thanks.

BD87 is still good way, but I am thinking of a program where I can give the basictype and the date and it will give me the number of success and failure with reason.

Similar Messages

  • Issue in Idoc Posting

    Hi Guru's,
    I am facing an issue during the consumption values upload in forecasting view thru LSMW (BAPI) with Idoc, issue is that at the end of the upload i am getting status of Idoc posting is 53 which is Application Document Posted, but i found some of the the materials for which consumption values were not uploaded but Idoc posting status is showing 53 and getting massage:Material number XYZ1234 in version  already exists.
    Kindly give ur expert opinion on the above mentioned issue.
    With Regards.

    A little clarification might help you...  explain 'BOX'.  Do you mean an SAP Instance?  SAP Instance/Client?  Or ??

  • Inbound IDOC error - status code 52- application document not fully posted

    Hi,
       In Inbound IDOC, the status code is 52 ---> Application document is not fully posted(satus of the inbound idoc is in yello colour). I want to reprocess this idoc in BD87 t.code in order to convert the yellow colour to green colour. Before reprocessing the IDOC, i need to rectify the problem and then reprocess the idoc in bd87. am i correct? if yes, what i need to do to solve the error --->application document not fully posted. Please guide me friends.
    Thanks in advance.
    Regards,
    Sri

    HI
    If you are FM to process the inbound  IDOC,
    possibilities are like below .
    Reason 1 :
    In partner profiles, check is it trigger immediately or not ? for particular partner profile which u r using .
    reason 2 :
    If you are using BDC code to update the data .if any screen contains error then also you will get the status in yellow .
    reason 3 :
    Have you tried with  TCODE  BD87 ,  might be it is processing error also .
    i have worked on same probelm so  if u r not solved with the issue after trying above 3 reasons .
    reply me back .

  • Inbound IDOC Posting

    I am developing a function module in ECC that will be used to post inbound IDOC for customer creation DEBMAS07
    The logic is as follows -
    The function receives an IDOC structure
    It then invokes function module 'IDOC_INPUT_DEBITOR'
    IDOC_INPUT_DEBITOR takes care of creating a new customer in table KNA1. But I was expecting IDOC_INPUT_DEBITOR to also handle the IDOC posting. This way I can go to WE02 and see a new IDOC record. What am I missing? Is there some more code I need to write after the function module call?
    Thank you.
    * IDOC structures for using ALE
         data       lc_no_display         type bdwfap_par-inputmethd value ' '.
         data       lt_idoc_control       type standard table of edidc.
         data       ls_idoc_control       type edidc.
         data       lt_idoc_data          type standard table of edidd.
         data       lt_idoc_data_knvi     type standard table of edidd.
         data       lt_idoc_status        type standard table of bdidocstat.
         data       ls_idoc_status        type bdidocstat.
         data       lt_return_variables   type standard table of bdwfretvar.
         data       lt_serialization_info type standard table of bdi_ser.
         data       lv_workflow_result    type bdwf_param-result.
         data       pi_idoctyp            type edi_iapi00-idoctyp.
         data       pt_segments           type standard table of edi_iapi11.
         data       lw_segments           type edi_iapi11.
         data       ls_idoc_data          type edidd.
         data       ls_e1kna1m            type  zdebmas07_e1kna1m.
         data       e1kna1m               type e1kna1m.
    *** CONTROL DATA
         ls_idoc_control-mandt  = input-idoc-edi_dc40-mandt.
         ls_idoc_control-status = input-idoc-edi_dc40-status.
         ls_idoc_control-doctyp = input-idoc-edi_dc40-idoctyp.
         ls_idoc_control-direct = input-idoc-edi_dc40-outmod.
         ls_idoc_control-rcvprt = input-idoc-edi_dc40-rcvprt.
         ls_idoc_control-rcvprn = input-idoc-edi_dc40-rcvprn.
         ls_idoc_control-stdmes = input-idoc-edi_dc40-stdmes.
         ls_idoc_control-outmod = input-idoc-edi_dc40-outmod.
         ls_idoc_control-sndpor = input-idoc-edi_dc40-sndpor.
         ls_idoc_control-sndprt = input-idoc-edi_dc40-sndprt.
         ls_idoc_control-sndprn = input-idoc-edi_dc40-sndprn.
         ls_idoc_control-mestyp = input-idoc-edi_dc40-mestyp.
         ls_idoc_control-idoctp = input-idoc-edi_dc40-idoctyp.
         append ls_idoc_control to lt_idoc_control.
    *** READ SEGMENTS
         pi_idoctyp = ls_idoc_control-idoctp.
         call function 'IDOCTYPE_READ_COMPLETE'
           exporting
             pi_idoctyp         = pi_idoctyp
           tables
             pt_segments        = pt_segments
           exceptions
             object_unknown     = 1
             segment_unknown    = 2
             relation_not_found = 3
             others             = 4.
         loop at pt_segments into lw_segments.
           case lw_segments-segmenttyp.
             when 'E1KNA1M'.
               ls_idoc_data-segnam = 'E1KNA1M'.
               ls_idoc_data-mandt  = sy-mandt.
               ls_idoc_data-segnum = lw_segments-nr.
               ls_idoc_data-psgnum = lw_segments-parpno.
               ls_e1kna1m          = input-idoc-e1kna1m.
               move-corresponding ls_e1kna1m to e1kna1m.
               move e1kna1m to ls_idoc_data-sdata.
               append ls_idoc_data to lt_idoc_data.
               exit.
           endcase.
         endloop.
    *** IDOC INPUT CALL FUNCTION
         data: response type zsi_create_customer_is_res_tab.
         data: response_lwa type zsi_create_customer_is_respons.
         data: lwa_error_message type string.
         call function 'IDOC_INPUT_DEBITOR'
           exporting
             input_method          = lc_no_display
             mass_processing       = space
           importing
             workflow_result       = lv_workflow_result
           tables
             idoc_contrl           = lt_idoc_control
             idoc_data             = lt_idoc_data
             idoc_status           = lt_idoc_status
             return_variables      = lt_return_variables
             serialization_info    = lt_serialization_info
           exceptions
             wrong_function_called = 1
    others                = 2.

    Hello Megan,
    Check with the function modules
    EDI_DATA_INCOMING
    IDOC_WRITE_AND_START_INBOUND
    Program:
    RBDAPP01
    I guess this would answer your query.
    Regards,
    TP

  • Inbound IDoc Posting Function Module

    Give me an example of   how to write "Inbound IDoc Posting Function Module".
    In my IDOC i have 10 segments each containing 1 field.
    How do i create the Inbound IDoc Posting Function Module ??
    Is the following code correct ??
    FUNCTION ZIDOC_INBOUND.
    ""Local interface:
    *"  IMPORTING
    *"     VALUE(INPUT_METHOD) LIKE  BDWFAP_PAR-INPUTMETHD
    *"     VALUE(MASS_PROCESSING) LIKE  BDWFAP_PAR-MASS_PROC
    *"  EXPORTING
    *"     VALUE(WORKFLOW_RESULT) LIKE  BDWFAP_PAR-RESULT
    *"     VALUE(APPLICATION_VARIABLE) LIKE  BDWFAP_PAR-APPL_VAR
    *"     VALUE(IN_UPDATE_TASK) LIKE  BDWFAP_PAR-UPDATETASK
    *"     VALUE(CALL_TRANSACTION_DONE) LIKE  BDWFAP_PAR-CALLTRANS
    *"  TABLES
    *"      IDOC_CONTRL STRUCTURE  EDIDC
    *"      IDOC_DATA STRUCTURE  EDIDD
    *"      IDOC_STATUS STRUCTURE  BDIDOCSTAT
    *"      RETURN_VARIABLES STRUCTURE  BDWFRETVAR
    *"      SERIALIZATION_INFO STRUCTURE  BDI_SER
    *"  EXCEPTIONS
    *"      WRONG_FUNCTION_CALLED
    *DATABASE TABLES
    TABLES:LIKPUK.
    *DATA DECLARATIONS
        DATA: SALES_ORDER_NUM             LIKE Z1VBELN.
        DATA: DEL_TYPE                    LIKE Z1LFART.
        DATA: ACTUAL_GOODS_MOVEMENT_DATE  LIKE Z1WADAT_IST.
        DATA: SHIPPING_POINT              LIKE Z1VSTEL.
        DATA: LOADING_POINT               LIKE Z1LSTEL.
        DATA: ROUTE_PGI                   LIKE Z1ROUTE.
        DATA: PICK_DATA                   LIKE Z1KODAT.
        DATA: CUST_NO                     LIKE Z1KUNNR.
        DATA: LOCAL_DATE                  LIKE Z1STDAT.
        DATA: TOTAL_GOOD_MOV              LIKE Z1WBSTK.
    *INTERNAL TABLE DECLARATION
    DATA:
    IT_LIKP LIKE LIKPUK OCCURS 0 WITH HEADER LINE.
    INITIALIZE WORK FLOW
        WORK_RESULT = C_WF_RESULT_OK.
         LOOP AT IDOC_CONTRL.
    MAKE SURE WE HAVE CORRECT MESSAGE TYPE PASSED.
         IF IDOC_CONTRL-MESTYP NE 'Z_IDOC_PGI'.
         RAISE WRONG_FUNCTION_CALLED.
         ENDIF.
    CLEAR APPLICATION BUFFERS BEFORE READING NEW ENTRY
        CLEAR :IT_LIKP.
      REFRESH IT_LIKP.
    *PROCESS ALL THE DATA RECORDS IN AN IDOC AND TRANSFER THEM TO
    *APPLICATION BUFFERS
    INCLUDE MBDCONWF.
    LOOP AT IDOC_DATA WHERE DOCNUM EQ idoc_contrl-docnum.
    CASE IDOC_DATA-SEGNAM.
    WHEN'Z1VBELN'.
       SALES_ORDER_NUM  =    IDOC_DATA-SDATA.
       MOVE-CORRESPONDING SALES_ORDER_NUM TO IT_LIKP.
    WHEN 'Z1LFART'.
       DEL_TYPE    = IDOC_DATA-SDATA.
       MOVE-CORRESPONDING DEL_TYPE TO IT_LIKP.
    WHEN 'Z1WADAT_IST'.
       ACTUAL_GOODS_MOVEMENT_DATE    = IDOC_DATA-SDATA.
       MOVE-CORRESPONDING ACTUAL_GOODS_MOVEMENT_DATE TO IT_LIKP.
    WHEN 'Z1VSTEL'.
       SHIPPING_POINT    = IDOC_DATA-SDATA.
       MOVE-CORRESPONDING SHIPPING_POINT TO IT_LIKP.
    WHEN 'Z1LSTEL'.
       LOADING_POINT   = IDOC_DATA-SDATA.
       MOVE-CORRESPONDING LOADING_POINT TO IT_LIKP.
    WHEN 'Z1ROUTE'.
       ROUTE_PGI    = IDOC_DATA-SDATA.
       MOVE-CORRESPONDING ROUTE_PGI TO IT_LIKP.
    WHEN 'Z1KODAT'.
       PICK_DATA =   IDOC_DATA-SDATA.
       MOVE-CORRESPONDING PICK_DATA TO IT_LIKP.
    WHEN'Z1KUNNR'.
       CUST_NO  =   IDOC_DATA-SDATA.
       MOVE-CORRESPONDING CUST_NO TO IT_LIKP.
    WHEN'Z1STDAT'.
       LOCAL_DATE  =   IDOC_DATA-SDATA.
       MOVE-CORRESPONDING LOCAL_DATE TO IT_LIKP.
    WHEN'Z1WBSTK'.
       TOTAL_GOOD_MOV  =   IDOC_DATA-SDATA.
       MOVE-CORRESPONDING TOTAL_GOOD_MOV TO IT_LIKP.
    ENDCASE.
    ENDLOOP.
    selecting data from the database
    select * from likp into corresponding fields of table it_likp.
    add status record
        IF SY-SUBRC EQ 0.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '53'.
          IDOC_STATUS-MSGTY = 'I'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '004'.
          IDOC_STATUS-MSGV1 = it_likp-VBELN.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
        ELSE.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '51'.
          IDOC_STATUS-MSGTY = 'E'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '005'.
          IDOC_STATUS-MSGV1 = it_likp-VBELN.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
          WORKFLOW_RESULT = C_WF_RESULT_ERROR.
          RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
          RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
          APPEND RETURN_VARIABLES.
          CLEAR RETURN_VARIABLES.
        ENDIF.
    IF SY-SUBRC EQ 0.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '53'.
          IDOC_STATUS-MSGTY = 'I'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '004'.
          IDOC_STATUS-MSGV1 = IT_LIKP-LFART.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
        ELSE.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '51'.
          IDOC_STATUS-MSGTY = 'E'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '005'.
          IDOC_STATUS-MSGV1 = IT_LIKP-LFART.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
          WORKFLOW_RESULT = C_WF_RESULT_ERROR.
          RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
          RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
          APPEND RETURN_VARIABLES.
          CLEAR RETURN_VARIABLES.
        ENDIF.
    IF SY-SUBRC EQ 0.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '53'.
          IDOC_STATUS-MSGTY = 'I'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '004'.
          IDOC_STATUS-MSGV1 = IT_LIKP-WADAT_IST.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
        ELSE.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '51'.
          IDOC_STATUS-MSGTY = 'E'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '005'.
          IDOC_STATUS-MSGV1 = IT_LIKP-WADAT_IST.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
          WORKFLOW_RESULT = C_WF_RESULT_ERROR.
          RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
          RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
          APPEND RETURN_VARIABLES.
          CLEAR RETURN_VARIABLES.
        ENDIF.
        IF SY-SUBRC EQ 0.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '53'.
          IDOC_STATUS-MSGTY = 'I'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '004'.
          IDOC_STATUS-MSGV1 = IT_LIKP-VSTEL.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
        ELSE.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '51'.
          IDOC_STATUS-MSGTY = 'E'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '005'.
          IDOC_STATUS-MSGV1 = IT_LIKP-VSTEL.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
          WORKFLOW_RESULT = C_WF_RESULT_ERROR.
          RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
          RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
          APPEND RETURN_VARIABLES.
          CLEAR RETURN_VARIABLES.
        ENDIF.
        IF SY-SUBRC EQ 0.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '53'.
          IDOC_STATUS-MSGTY = 'I'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '004'.
          IDOC_STATUS-MSGV1 = IT_LIKP-LSTEL.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
        ELSE.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '51'.
          IDOC_STATUS-MSGTY = 'E'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '005'.
          IDOC_STATUS-MSGV1 = IT_LIKP-LSTEL.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
          WORKFLOW_RESULT = C_WF_RESULT_ERROR.
          RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
          RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
          APPEND RETURN_VARIABLES.
          CLEAR RETURN_VARIABLES.
        ENDIF.
        IF SY-SUBRC EQ 0.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '53'.
          IDOC_STATUS-MSGTY = 'I'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '004'.
          IDOC_STATUS-MSGV1 = IT_LIKP-ROUTE.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
        ELSE.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '51'.
          IDOC_STATUS-MSGTY = 'E'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '005'.
          IDOC_STATUS-MSGV1 = IT_LIKP-ROUTE.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
          WORKFLOW_RESULT = C_WF_RESULT_ERROR.
          RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
          RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
          APPEND RETURN_VARIABLES.
          CLEAR RETURN_VARIABLES.
        ENDIF.
        IF SY-SUBRC EQ 0.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '53'.
          IDOC_STATUS-MSGTY = 'I'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '004'.
          IDOC_STATUS-MSGV1 = IT_LIKP-KODAT.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
        ELSE.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '51'.
          IDOC_STATUS-MSGTY = 'E'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '005'.
          IDOC_STATUS-MSGV1 = IT_LIKP-KODAT.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
          WORKFLOW_RESULT = C_WF_RESULT_ERROR.
          RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
          RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
          APPEND RETURN_VARIABLES.
          CLEAR RETURN_VARIABLES.
        ENDIF.
        IF SY-SUBRC EQ 0.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '53'.
          IDOC_STATUS-MSGTY = 'I'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '004'.
          IDOC_STATUS-MSGV1 = IT_LIKP-KUNNR.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
        ELSE.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '51'.
          IDOC_STATUS-MSGTY = 'E'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '005'.
          IDOC_STATUS-MSGV1 = IT_LIKP-KUNNR.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
          WORKFLOW_RESULT = C_WF_RESULT_ERROR.
          RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
          RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
          APPEND RETURN_VARIABLES.
          CLEAR RETURN_VARIABLES.
        ENDIF.
        IF SY-SUBRC EQ 0.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '53'.
          IDOC_STATUS-MSGTY = 'I'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '004'.
          IDOC_STATUS-MSGV1 = SY-DATLO.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
        ELSE.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '51'.
          IDOC_STATUS-MSGTY = 'E'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '005'.
          IDOC_STATUS-MSGV1 = SY-DATLO.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
          WORKFLOW_RESULT = C_WF_RESULT_ERROR.
          RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
          RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
          APPEND RETURN_VARIABLES.
          CLEAR RETURN_VARIABLES.
        ENDIF.
        IF SY-SUBRC EQ 0.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '53'.
          IDOC_STATUS-MSGTY = 'I'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '004'.
          IDOC_STATUS-MSGV1 = IT_LIKP-WBSTK.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
        ELSE.
          IDOC_STATUS-DOCNUM = IDOC_CONTRL-DOCNUM.
          IDOC_STATUS-STATUS = '51'.
          IDOC_STATUS-MSGTY = 'E'.
          IDOC_STATUS-MSGID = 'YM'.
          IDOC_STATUS-MSGNO = '005'.
          IDOC_STATUS-MSGV1 = IT_LIKP-WBSTK.
          APPEND IDOC_STATUS.
          CLEAR IDOC_STATUS.
          WORKFLOW_RESULT = C_WF_RESULT_ERROR.
          RETURN_VARIABLES-WF_PARAM = 'Error_Idocs'.
          RETURN_VARIABLES-DOC_NUMBER = IDOC_CONTRL-DOCNUM.
          APPEND RETURN_VARIABLES.
          CLEAR RETURN_VARIABLES.
        ENDIF.
    endloop.
    endfunction.

    Hi,
    First goto WE20-> click on the logical system , now select the receiver LS which you are using as your partner. Now in the inbound parameters cehck what is the process code is attached.
    once you get the process code then go to WE42 tcode.. there you give the process code and then double click you will get the function module IDOC_INPUT_FIDCMT.
    Hopw you got my point.
    Regards,
    Nagaraj

  • IDoc Status "& & & &" in IDoc posting in BD87 - ALE

    hi,
    I am integrating two R3 servers and posting the datas from HR to cProjects server.
    In Outbound I can send the IDocs and In Inbound IDocs are getting into destinations (cProjects) servers along with status "& & & &" in BD87.
    Can anyone help me to know..Where the cause of problem..
    Thanks in advance
    Regards,
    Srinivasan.R

    Hi.,
    In we02 its OK..
    Its showing ...
    Status Message for Selected IDoc                                                               
    Status Text:   IDoc: 0000000000036306 Status: IDoc ready to be transferred to application       
    T100 Text:     No filters , No conversion , No version change .                                 
    But., in place of BD87 I am getting status only "& &, &, &".
    Regards,
    Srinivasan.R

  • Help in inbound idoc posting using bdc

    Hi,
    We are facing a problem during integration testing to post inbound idocs.
    The scenario is :
    A custom FM is written to process the inbound idocs, which does the following processes in sequence.
    1. BAPI used to create Goods Receipt
    2. BDC used to create Delivery using VL01N
    3. BDC used to create Handling Unit using VL02N
    4. BDC used to create Post Goods Issue using VL02N
    The VL01N creates a deivery, and using that delivery BDC calls VL02N to create HU.
    In unit testing the idocs are success, but when multiple idocs are used in integration testing, all fails either during delivery creation or HU creation.
    The error message we often get when HU is failed is  : "Runtime error RAISE_EXCEPTION has occured ".
    We have also incorporated a commit work and wait of 5 seconds after each BDC to avoid locking problem if any.
    The partner profile is set to ' trigger by background program'.
    Standard program RBDAPP01 is scheduled to collect the IDocs in status 64 and then to be processed.
    The package size used is 1,  inorder to process idocs one by one to avoid locking.
    Should any object type be given in RBDAPP01 ?
    If so, is it required to maintain any record for that object type in table TBD55 to process idocs serially in RBDAPP01 ?
    Any help in this regard is appreciated.
    Thanks in advance
    Regards
    Meena George

    Refer these links and see if they are useful:
    http://help.sap.com/saphelp_nw04/helpdata/en/0b/2a66c9507d11d18ee90000e8366fc2/content.htm
    Regards,
    Ravi

  • Inbound Processing of Idocs with status other than success

    Hi,
           I am new to ALE/Idocs. Can anyone  please let me know how can I process the Idocs which have the status other than 53.
    Thanks &  Regards,
    Indira

    Hi,
    In addition to the previous posts few more programs to process failed inbound IDocs are as mentioned below.
    - Use program RBDAGAIE to process edited IDocs (IDocs with status 69)
    - Use program RBDAPP01 to process IDocs failing with serialization issue (IDocs with status 66)
    - Use program RBDAGAI2 to process IDocs after ALE inbound error (IDocs with status 56, 61, 63, 65)
    ~ Bineah

  • WE-19 Inbound Idoc Process - Status Code 51

    Hi,
    I generated Outbound idoc COND_A successfully to send it out to XI. I used same Idoc again in WE19 and changed partner details and tried Inbound Processing. Its giving me error code 51 ("ISO Currency USD can not be converted unambiguously to SAP currency for E1KOMG" )
    Any Idea how to fix this error. basically I did not changed anything.
    Message was edited by: Ram Krish

    Appana,
    Thank you very much for your reply.
    I did setup all parameters as Iam getting this Idoc as an Inbound to R3 as well. Thsi Idoc will be both Outbound and Inbound to R3.
    I successfully sent this Idoc to XI. and then as I wanted to test the same Idoc for inbound, I changed Paramters according to my setup.
    Sequence of status are
    74 - created with test transaction
    50 - Idoc added
    64 - Idoc ready to be transferred to Application
    62 - Idoc Passed to Application
    51 - ISO currency USD can not be converted unambiguously to SAP currency for KOMG
    I looked at several fields in E1KOMG segment and changed one of the currency field to USD which didn't help to fix this error.
    I really appreciate any help to fix this error.

  • How does posting of Inbound Idoc works

    Hi,
    Posting of Inbound Idoc has 2 ways of posting
    they are
    1. Immediate processing
    2. Background processing.
    I wanted to know about these two processing works.

    Hi,
    IDocs can be passed to the application either immediately on arrival or can follow in batch.
    You can post an inbound IDoc in three ways:
    by calling a function module directly: A function is called that imports the IDoc directly. An error workflow will be started only if an error occurs.
    by starting a SAP Business Workflow. A workflow is the sequence of steps to post an IDoc.
    by starting a work item A single step performs the IDoc posting.
    check this link for details:
    http://www.erpgenie.com/ale/how_it_works.htm
    regards,
    keerthi.

  • How to Read Idoc - Segment fields values and status messages

    Hi,
      I am having one requirement as i want to read the segments along with the field values and also i want to read all the status messages.
    first i read the idoc data from EDIDS and segments data from EDID4 and the staus messges from T100. but still i am not getting all the status messages.
    is there any other table which contains the information of IDOC segments and field values and also the status messages.
    Regards,
    Kumar

    You need to use
    V_MSGNO = EDIDS-STAMNO.
    CALL FUNCTION 'MESSAGE_PREPARE'
      EXPORTING
        MSG_ID   = EDIDS-STAMID
        MSG_NO   = V_MSGNO
        MSG_VAR1 = EDIDS-STAPA1
        MSG_VAR2 = EDIDS-STAPA2
        MSG_VAR3 = EDIDS-STAPA3
        MSG_VAR4 = EDIDS-STAPA4
      IMPORTING
        MSG_TEXT = V_TEXT.
    WRITE: / V_TEXT.
    a®

  • Delay in the Inbound Idoc Posting Process

    Dear Friends,
    We have an scenario in the Inbound Idoc Posting Process, when we process the Idocs through the standard Inbound Program - RBDAPP01, we face the delay of 3hrs to 12 hrs, approx.
    When we try to re-process the same through the manual process, we could successfully post the Idocs, immediately.
    When the same happens, through the background job - the delay is happening.
    As we see, there is no problem with the program - RBDAPP01, but can't able to trace the delay in the process.
    Any suggestions / advises are welcome.
    Thanks in advance.

    Hi Prasanna,
    The update will happen only if a value already exists with the same unit of measure in the system. If the quantity is left blank in the system and if you are trying to update, the update might not happen. Even if the value is Zero in the system, provide the same unit of measure as the data used in the BAPI.
    Regards,
    Yogesh

  • Processes in Inbound IDoc posting

    Hi guys,
    I'm new with IDocs, and I have an object which requires Inbound IDoc posting..
    Can you give me the possible steps/processes including the tcodes on how can I solve this object?
    Please also include FMs that I might possibly used during my development.
    I highly appreciate all your swift responses. Thanks!

    Hi Mel,
    You can use FM IDOC_INBOUND_WRITE_TO_DB to create an inbound IDoc.
    CALL FUNCTION 'IDOC_INBOUND_WRITE_TO_DB'
        EXPORTING
          PI_STATUS_MESSAGE       = I_EDIDS
        IMPORTING
          PE_IDOC_NUMBER          = DOCNUM
          PE_STATE_OF_PROCESSING  = STPROC
          PE_INBOUND_PROCESS_DATA = I_TEDE2
        TABLES
          T_DATA_RECORDS          = I_EDIDD
        CHANGING
          PC_CONTROL_RECORD       = I_EDIDC
        EXCEPTIONS
          IDOC_NOT_SAVED          = 1
          OTHERS                  = 2.
    Regards,
    Chandra Sekhar

  • Read IDOC WMMBID02 information and compare inventory data with SAP

    Hi All,
    Here is an explanation of the issue:
    I need to read the data from an inbound IDOC, status 64, of standard type WMMBID02 and message type WMMBXY. I do not want to post the IDOC, but only read the IDOC information which is mainly the material number, batch, status(INSMK), quantity and unit. This data I have to compare with SAP data and see if it is same for the selected material numbers. Now to read and process the inbound IDOC we have a program RBDAPP01 (BD20 Transaction) which calls the process code WMMB (WE42 transaction) which in turn calls the function module L_IDOC_INPUT_WMMBXY. This FM posts the IDOC. I have created a function module with the same import, export and tables parameters like this FM and have attached it to a custom process code ZWMMB. This function module should just read the data of the IDOC and put it in the table TB_IDOC_DATA like EDIDD (IDOC data records). I then loop into this table, extract SDATA and split it into the 3 segments of WMMBID02 and then extract my required data, MATNR, CHARG, INSMK, MENGE & MEINS.
    My Question:
    How do I trigger the process code ZWMMB so that I can read the IDOC data when it is fired (status 64), just like program RBDAPP01. Is there any standard code that can be copied and modified or how to do it???
    I have tried to be very clear with the question, please reply if the question is not clear. If I am clear, please help
    Thanks Anirban

    I am able to read the contents of the IDOC, but I need to run the FM when I fire the IDOC of message type ZWMMBXY. I have created a custome FM which will behave as a stndard FM for inbound IDOC processing.

  • SAP IDOC shows status 03, but no file is written

    We have SAP configured to generate delivery IDOCs when the SAP Delivery document is posted/saved. The IDOC is initially created with status 30. There is batch job RSEOUT00 every 30 mins that collects the IDOCs in status 30 and converts to status 03. When we review the IDOC processing screen, even though they are in status 03 and successfully written outside of SAP to a folder, there is no file in the folder. We are missing IDOCs. There is no real time external system integration. We are simply trying to write IDOC files to a folder.
    Can you some please share your insights on how to resolve this issue?
    Thanks in advance
    Satish

    RFC destinations, Logical systems, and then Partner profiles needs to be maintained. and You need to create the Distribution model  in sender system.
    Partner profiles maintained in both the systems, soure Outbound properties
    Target Inbound properties.
    if you have two clients in system it will be easily you can check.

Maybe you are looking for