Read Payload for a processed message

Hello,
i am not satisfied with the display of the messages in SXMB_MONI.
I want to write a program that reads table SXMSPMAST (holding all processed messages) with selection criteria = application error. For those entries I want to read the corresponding payload from the XML message. How can I do this?
Thanks in advance!
Regards,
Frank

Hi,
did you solve your question? And can you tell me how. I do have a similar problem, where I would like to download the payload from a bunch of messages at once. Without douing this manually in SXMB_Moni.
Would be great, if you could help me there.
Thanks and Regards,
Sebastian

Similar Messages

  • "Scheduled for Outbound processing" message

    Hi,
    My scenario is: R/3 (IDoc Customer) -> XI -> PC (file) and I use a BPM with option "multi to single".
    In the Message Monitoring, I have two steps:
    1. Idoc DEBMAS06 --> BPM:
    status = "Processed successfully". Thus it's ok.
    2. BPM --> my PC:
    status = "Scheduled for Outbound processing" and in column "outbound" I have not "IENGINE". There is no other error message and obviously no data are sent to my PC.
    Have you already seen this message?
    And have you a solution?
    Note: Last friday, the same scenario was ok. I have just changed some data inside the mapping (occurence was not change).
    Mickael.

    Hi,
    Try resetting the status to "Ready".
    If you get SYSFAIL again, try deleting that particular LUW. If there are other messages waiting in the queue, just click on the unlock queue button and the remaining messages will flow thru.
    Regards,
    Sridhar

  • Read payload for error messages and throw a red flag in SXMB_MONI

    Hello All,
    I am calling a synchronous web service from PI ccBPM and getting a response back to PI ccBPM itself.
    So the steps in BPM are receive(from CRM), sync step (to call web service) and a control step (to end the BPM process).
    The requirement is to check if error_list node in the response from web service call has a value in it and throw an error in SXMB_MONI so that they can easily identify how many messages errored out  out of thousands of messages.
    This is the response structure for web service if there are errors.
    <manageResponse>
      <result>
                    <ErrorList>
                        <object>
                            <hyatt>partnerupdate--NR</hyattt>
                            <Message />
                            <Operation>jukio</Operation>
                            <User>atuser</User>
                        </object>
                     </ErrorList>
    </result>
    </manageResponse>
    Again I only need to see if error_list is not empty and throw a red flag error in SXMB_MONI.
    Thanks
    Mike

    Hi Mich,
      In Response map when Error segment appear's fail the maping so that you can see the list of message in MONI. and do not need to put any conditions in MONI.
    I mean in your Respoinse when ERROR_LIST segment coman under that one manatory field you select and take that field length say 20 characters.
    source field->Substring (0,100) get the 100 characters from source in that case case from source it won't get 100 characters mapping will fail so that you can see the Error messages in SXMB_MONI.
      Finally what I am saying do the wrong condition mapping in the response mapping so that mapping will fail.
    Regards,
    Venu.

  • To read payload for an idoc

    Dear experts,
    Scenario is to copying file to a path of FTP server and XI posting corresponding idocs to SAP server.
    I find that in table EDIDC in sap server,we get messageid = Message id of monitoring in XI system.
    I am using this mapping to conclude which idoc in SAP server exactly refers to which payload in XI server
    Any simpler way to do this ?
    I used IDX5 on XI server ,it displays an idoc number but that is not the one which i see on SAP server.

    I used IDX5 on XI server ,it displays an idoc number but that is not the one which i see on SAP server
    the IDOC number displayed in IDX5 is the one generated in SAP XI/ PI......to see the one generated in SAP ECC check steps b and c of this blog: /people/kamalkumar.ramakrishnan/blog/2008/02/13/monitoring-the-idoc-adapter-in-xipi-using-idx5
    Regards,
    Abhishek.

  • Extend Features in Acrobat Reader Option for Batch process!

    Hello Eveyone!
    I am looking to find a way for the followong process.
    I just need to apply the options to all of my PDF files in Acrobat professional.
    The options is
    Advanced>Extend Features in Acrobat Reader
    and PDF must overwrite in the same path.
    I appreciate, if someone can helpme to comeout from this issue.
    Thanks in advance...
    Regards
    FroQ

    Thanks for your reply guys,
    what do you mean the following sentence, can you please eleburate for me to understand better.
    You need a special rights management server to do it.
    Regards
    HARI

  • Hide sxmb_moni payload for a specific message interface to Display

    In sxmb_moni , I have a synchronous interface , I want to turn off sync logging for just one interface.In sxmb_adm , there is option to turn off entire logging for Sync with the Integration Engine Configuration DELETION - PERSIT_DURATION - SYNC - Set to 0.
    I don't want to use Roles, enryption at this point.
    Thanks!

    I dont think it is possible.
    VJ

  • How to restart the Successfully processed messages

    Hi,
    I have IDOC to File Scenario
    we posted the idoc from R/3 and it has processed successfully.
    Now again i want to process that idoc again with out going to R/3.
    How to restart the Successfully processed message from MONI.
    we have one option in MONI Restart. this is not working for Successfully processed messages.
    How to achieve this
    Regards
    Suman

    Hello Suman..
    XI: Restarting successfully processed messages..
    Go through this : Michal Krawczyk Blog This will really helpful to you..
    /people/michal.krawczyk2/blog/2005/11/09/xi-restarting-successfully-processed-messages
    Reward Points If it is Helpful...
    Thanks,
    Satya Kumar..

  • Process Message Processing delay

    Can anybody explain, why does it take longer time in SAP for a process message to process successfully?
    In CO54 - From the moment it gets created (yello light) to the moment when it is successfully processed (green light). We have an issue in one of the plant where it takes upto 3 to 4 hours to process the message. It is mainly for PI_PROD message category and it happens for only fewl PI_PROD process messages.
    It is only happening for one plant though.

    Ok, I found the solution.
    There is batch job that is scheduled at client level and its priority is "Medium".
    - We changed the priority to "high" (still waiting to see if this helps)
    - If the above solution didn't work then schedule batch job at plant level instead at client level [SAP Recomended] (This should defintely solve the problem)

  • Restarting "Recorded for outbound processing"

    Hi,
    Is there anyway to restart automatically, "recorded for outbound processing" messages, on PI system?
    Thank you,
    Best regards,

    Register your queues again and see if it gets processed.
    Last option could be to try to delete the message from queue and then restart it in moni.
    Regards,
    Prateek

  • Read receipts for mail

    Is there any way to get a read receipt with Mail like there was when I had Outlook in a previous life? Cant find how to block a read receipt when requested either. Any help would be appreciated.
    Thanks

    The Mail application does not include a read receipt request for sent messages nor does it provide a read receipt without your knowledge when requested by the sender of a message when opening a received message.
    I consider this an invasion of privacy. A minor one but an invasion of privacy nevertheless.
    Via the Terminal, you can have Mail "request" a read receipt for all sent messages but this will work only if the recipient's email client supports this and the recipient enables the option.
    http://discussions.apple.com/message.jspa?messageID=2297045#2297045

  • Reading material for ALE IDOC

    Hi Friends,
    Can anybody provide me any reading material for IDOC process so taht I can learn and use the IDOC functionality. I want to process few SAP transactions in the background through IDOC.
    Thanks & Regards
    Satya

    Hi Friends,
    Can anybody provide me any reading material for IDOC process so taht I can learn and use the IDOC functionality. I want to process few SAP transactions in the background through IDOC.
    Thanks & Regards
    Satya

  • XSTEPS- Process Message Configuration

    Hi,
    We are trying to use the process message PP_OPACT to confirm the activities on operation and we are gettign the following error message
    "Parameter XXXX not intended for work centerXXXX"
    Can anyone let us know how to resolve this error.
    Also is there configuration where the symbols for the activities can be automtically populated for the process message PP_OPCON.
    Thanks in Advance.
    Sridhar

    hi,
    what are your standard value keys in workcenter?
    and is it matching with your parameter entered in that char of process message??
    regards,
    sandeep

  • Payload not visible in message monitor for BPMN

    Hi Folks,
    I am doing synchronous call from BPM (NW) and though the call is successful I am not able to see the payload for the syn Re/Response messages. In the old BPM in PI I used to check the new transaction box and I used ot see the message. Is there any similar option in BPMN to view the messages internal to BPMN?

    I see the messages in Process Instance view under context Data.

  • Retrieve processed message payload from database

    Hi,
    We need to retrieve the payload of all the messages which have been processed in last 1 month.
    We do not have the message archiving configured currently.
    Could you please let us know how can i retrieve the payload? We can not do it manually as the voulme is really huge.
    Please help with suggestions.
    Thanks,
    Jane

    If you are not archiving the messages then i don't think you can get the payloads for last one month.
    However there is a service using which you can retrieve the payload.
    PI/XI: how to get a PI message from java stack (AAE) in PI 7.11 from ABAP?
    You can write a wrapper around and download multiple payloads.

  • Cannot process messages after applying BT 2010 CU6 if BAM tracking profile references BTAHL7 messaging payload schemas

    We are unable to process HL7 V2 messages after applying BizTalk 2010 CU 6 in a development environment when we have a BAM tracking profile deployed that references the BTAHL7 messaging payload schemas. The messages process with no issue if we remove the
    message payload schema field mappings and use only message context properties. We have replicated this issue using only the default BTAHL7 pipelines and microsoft.com HL7 V2.3 unedited schemas and a very simple BAM activity and tracking
    profile. In other words, we've eliminated our customization and still see the issue. The messages fail in the pipeline with the following error:
    A pipeline component in the receive pipeline:<BTAHL72XReceivePipeline>,Version=1.0.0.0, Culture=neutral, PublicKeyToken=75be5a91f43bf6c9" is using the message context
    properties "BTS.MessageDestination" or "BTS.SuspendMessageOnRoutingFailure" in a unsupported fashion. The pipeline processing is being terminated.
    Can anyone help us resolve this issue?
    Thanks.

    This seems to be a known bug please refer the below discussion-
    BizTalk Server 2010 Cumulative Update 6 - Compatibility with BTAHL7?
    I would suggest you to uninstall CU6 first, restart the VM, Install CU7 and restart again.
    CU 7 will have all the bug fixes for BizTalk 2010 till date.
    Cumulative
    update package 7 for BizTalk Server 2010
    Service Pack
    and Cumulative Update list for BizTalk Server 
    Please let me know if there is anything that I can do to help.
    Thanks,
    Prashant
    Please mark this post accordingly if it answers your query or is helpful.

Maybe you are looking for

  • How do I connect my i-pod to my car cd player

    I would like to listen to my i--pod in my car. How can I connect it to my car cd player?

  • Maybe Going Pro, But First A Question Or Two

    Hello All!! I have posted this question regarding DVD Menus and Chapters on the iDVD board (http://discussions.apple.com/thread.jspa?threadID=626363&tstart=0), and was advised to pose the same question here (since I have thoughts of purchasing a copy

  • Constant Freezing/Crashing of Browser

    After I updated Flash player this morning, it has become almost unusable!! It will work for a little while, then I get a message, "Flash plug-in is not responding". I have to kill my browser. Usually, only restarting my computer will make it work aga

  • BAdi for fetching Time Writing hours

    Hi all, I want to know is there any BAdi available for fetching approved Time Writing Hours. I came to know about one BAdi -> BADI CATS_APPROVAL  where i could not find the appropriate method. Please help me. Thanks in advance. Regards, Kani.

  • How to create pro forma invoice (F8) in this way

    hi all, we would like to create pro forma invoice with reference to DO(PGI done). At the same time update LC#Number under the header text and update Box No. under the item text. we're looking for one step solution(either BDC,bapi...etc) because there