Reader 8.1.3 installer does not start on Windows 2003 x64

Hello,
i use Windows Server 2003 SP2 as 64 Bit edition on AMD and have installed Reader 8.1.2 successfully. Now i tried to install 8.1.3, which is the most recent of the 8th series i found, and fail because the installer simply does nothing! It starts up and then nothing happens. I've downloaded the EXE several times directly from Adobe with the same result.
What can i do?

Sorry, i still don't get why 8.1.2 runs perfectly (and yes, there is a 64bit support for Windows 2003 Server!) and 8.1.3 did not even start. That makes no sense to me.
And because i want do deploy 8.1.3 even update is no alternative for me.

Similar Messages

10 G installation does not start on Windows 2000 SP 4

Machine configuration:
Pentium 4 2.8 GHz
496 MB RAM
120 GB HDD
The temp folder log shows that all installer requirements are met.
Still the OUI window does not show up. Any ideas?

Hi Viking
First things first. Here are some things to consider:
1. If using Windows 2000, you need to be using Windows 2000 Professional with SP4.
2. You should not have any other Oracle software running during this install.
3. You also not have ORACLE_HOME, TNS_ADMIN or any of the other Oracle environment variables set.
4. You need to be a local administrator on the machine.
5. You should not have a firewall enabled.
6. You need to have a fully qualified domain name (FQDN) set for the machine.
7. The FQDN should be set in the HOSTS file which you can find in c:\windows\system32\drivers\etc
8. You need to check the certification matrix for 10.1.3.2.0 and make sure it is available for Windows 2000 and that there are no other prerequisites?
Does any of this help?
Regards
Michael

VC does not start on Windows 2003

Hi,
I have applied the note 804496 (registry changes + IIS changes, etc.) which should enable VC to start on a Windows 2003 / IIS 6.0 system. But I still get the error :
"Fatal Error:
No Visual Composer Server was found at specified address
(Error reading server parameters in url:bin/gm1433030.asp)"
I also installed Adobe SVG 3.0 on the server as some suggested in another thread.
Do you have any ideas?
Thanks in advance,
David

Hi David,
I had a similiar problem but have now got it working.
There are two other things to try:
1) check note 772559 which contains the Visual composer Analyzer. This will test and fix any problems it finds.
2) Look at the Visual composer installation guide which was released this week. It seems to have some extra configration steps which aren't included in OSS note 804496. the path is https://websmp106.sap-ag.de/instguides ->NW04->Installations->SAP VC.
In my case I originally succeeded in installing VC6.0sp2, which worked. Upon re-booting it no longer woked and gave the same error as yours now does. I eventually ran the unistaller (which hangs, so you have to keep trashing it until it is completely uninstalled). And the re-installing it. And fingers crossed it has worked successfully ever since.
Hope that was some help
Ed

R12.1.1 Fullfillment service does not start in windows 2003 envirinment

I have tried to start the fullfillment service. It starts and then suddenly stops.
Please help

In event viewer i found
"The description for Event ID ( 0 ) in Source ( Oracle Fulfillment Server VIS_r12serv ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Oracle Fulfillment Server VIS_r12serv Stopped"
Edited by: Bala Krishna on May 27, 2009 11:18 AM

I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?

I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?

You need to contact the developer/manufacturer directly to determine if their product is compatible w/Yosemite. It is not listed on their system requirement website:
Mac OS X 10.9 Mavericks
Mac OS X 10.8 Mountain Lion
Mac OS X 10.7 Lion
Mac OS X 10.6 Snow Leopard*
Note: ArchiCAD 17 is the last version of ArchiCAD to support Mac OS X 10.6
Only case insensitive file-system volumes are supported.
http://www.graphisoft.com/support/system_requirements/archicad17.html

ITunes 9 Home Sharing does not work on Windows 7 x64

iTunes 9 Home Sharing does not work on Windows 7 x64.
Getting the following error message:
Home sharing could not be activated because this computer is not authorized for the account "iTunes account." Please authorize this computer and try again.
This is a bug since my computer is authorized in iTunes and there is only 2 computer authorized for my iTunes account, so I have 3 more left till I should get this message.
I've just upgraded my iPhone to OS 3.1 using it this morning.
Please advise.
Environment: Windows 7 x64, HP TouchSmart tx2-1020us Notebook
Ivan Farkas
<edited by host>

I am using Windows 7 x64.
I am running iTunes 9.0.2.25
I am running Mcafee.
I can see and play music from the iTunes installation on my Windows 7 machine, but I CANNOT access the library to copy songs from this computer to other computers on my network.
YES, I have enabled "Home Sharing" using my iTunes account. NO, I have not authorized more than 5 computers on this account.
I believe this to be a Windows 7 related issue, as Home Sharing worked as advertised when I was using Vista (before I upgraded to Windows 7).
I CAN set up Home Sharing on two other (host) computers in my home network and it works. These computers are XP and a MacBook Pro. I CANNOT access my Windows 7 machine x64 to COPY music from one autorized library to another. Please help!!!
P.S. - I have attempted to get this to work by turning OFF my McAfee firewall. Windows firewall is disabled.
Message was edited by: turcott

Solaris 10 installation does not start

Hi
I am new to solaris . I downloaded the four zipped ISO files of solaris 10 from the website. I burned the images on the cd. When i insert the disk 1 and restart the computer it does not detect the cd as bootable and does not start the installation. I have win XP previously installed as the only os on my laptop. help me pls

Make sure your computer supports bootable CD's and that you burned the images correctly to your CDR.

Service reads data but Bpel process does not start

i have a very simple project. I have db2(as400) adapter and it reads data, i will receive data, transfom and send to oracle database. I deployed the project successfuly but when instance start i see the service reads the data but bpel process does not start and and there is no error. At the flow chart there is only readAS400 partnerlink, there is no bpelprocess. In the partnerlink i am usin polling, i read the data's with 1 and update to 2. It reads but dont update to 2.
In deploy step and when instance starts there is no errors. But when i am deploying i get a warning but i dont know it's related with this situation.
(Warning: property "activationAgent.readAs400.className" may not be understood by BPEL component BPELProcessEqpType - it will likely be ignored.)
Do you have any suggestion ? Thanks in advance.

check the recovery console, the bpel process possibly is going into manual recovery,
Another thing you might wanna try is using checkpoints in your process..
also, instead of getting the db adapter to instantiate the process, try a simpler process just to see if the db adapter is working or not..
A normal process, which you manually instantiate from em console, with the db adapter in it after the recevie activity
Edited by: AshishSharma on Jun 24, 2010 5:48 PM

PE 9 does not start on Windows 7 Ultimate 32 bit

No matter how I try to start PE 9, it does not start.
From Welcome Screen -> New Project: nothing happens. Form Elements Organizer -> File - New - Premiere Elements Video project it takes some time loading all modules, libraries and sorts of things until an error message appears saying that PE 9 does not function anymore.
That's all, no error log or something like this. Please let me know what info is needed.
PS: Why does my cursor jump to the beginning when I press enter in text editor here?

Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various
parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle...
this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video
editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708?tstart=0 for more) with Windows
(or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on
drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in
the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the
type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208?tstart=0 and Jim Simon in the Premiere Pro forum
http://forums.adobe.com/thread/856433?tstart=0 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but
eSata DOES have a fast enough data transfer for video editing... I have not used this eSata Dock... for reference only, YMMV and all the usual
disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

Itunes does not start in Windows 7

Hi,
Itunes does not start anymore...
It used to work witout any problems. Any hints?
Thanks
Philofun

Restart Computer.
Refer steps here to delete SC file(s):
Win7/Vista http://support.apple.com/kb/TS2363
WinXP http://support.apple.com/kb/TS1776
Then proceed to repair your QuickTime. START > CONTROL PANEL
WinXP - Add n Remove Programs
Win7/Vista - Programs n Features
highlight QUICKTIME and click CHANGE then REPAIR

Photoshop CS5 and CS6 does not start. Windows 7

I am using Photoshop CS5 as well as CS6, 64-bit on Windows 7. Since the last few days, I noticed that Photoshop would take a very long time to start (earlier it used to start within few seconds). Today, I found that both the Photoshop versions do not start at all. Nothing happens when I click the short-cut on the Task Bar. Neither do they start through the Start Menu. Why does this happen and what is the solution?

Have you tried using the task manager to see if Photoshop is hung and look at your windows reliability history to see if Photoshop CS5 an CS6 are crashing?

Lync 2013 Desktop does not start on WIndows 8.1

My Office 365 version of Lync 2013 64bit crashes every time I start it. There is no error message just the "Microsoft Lync has stopped working" message with Close option. In further looking for a solution, I found the suggestion to
uninstall the Intel Bluetooth drivers but my system uses Realtek Filter drivers. I have looked  in the event logs and found:
Log Name:      Application
Source:        Windows Error Reporting
Date:          2014-09-11 1:47:20 PM
Event ID:      1001
Task Category: None
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      --------Win8
Description:
Fault bucket 85949488684, type 4
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: lync.exe
P2: 15.0.4641.1000
P3: 53c5ce3c
P4: KERNELBASE.dll
P5: 6.3.9600.17055
P6: 532954fb
P7: e06d7363
P8: 0000000000005bf8
P9:
P10:
Attached files:
C:\Users\Yves\AppData\Local\Temp\WERCA6B.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\Yves\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_lync.exe_1f7a49ef615ca788e016ddaf8db0d1fb92c4a8e9_00000000_256fdc4d
Analysis symbol:
Rechecking for solution: 0
Report Id: aa908032-39db-11e4-8280-48d224dc5142
Report Status: 0
Hashed bucket: 61000269e077a9a343a6fe9bbb7efc54
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Error Reporting" />
    <EventID Qualifiers="0">1001</EventID>
    <Level>4</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-09-11T17:47:20.000000000Z" />
    <EventRecordID>143379</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Fedmet-YL-Win8</Computer>
    <Security />
</System>
<EventData>
    <Data>85949488684</Data>
    <Data>4</Data>
    <Data>APPCRASH</Data>
    <Data>Not available</Data>
    <Data>0</Data>
    <Data>lync.exe</Data>
    <Data>15.0.4641.1000</Data>
    <Data>53c5ce3c</Data>
    <Data>KERNELBASE.dll</Data>
    <Data>6.3.9600.17055</Data>
    <Data>532954fb</Data>
    <Data>e06d7363</Data>
    <Data>0000000000005bf8</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
C:\Users\Yves\AppData\Local\Temp\WERCA6B.tmp.WERInternalMetadata.xml</Data>
    <Data>C:\Users\Yves\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_lync.exe_1f7a49ef615ca788e016ddaf8db0d1fb92c4a8e9_00000000_256fdc4d</Data>
    <Data>
    </Data>
    <Data>0</Data>
    <Data>aa908032-39db-11e4-8280-48d224dc5142</Data>
    <Data>0</Data>
    <Data>61000269e077a9a343a6fe9bbb7efc54</Data>
</EventData>
</Event>
A lot of sites suggest to uninstall Intel Bluetooth drive but I does not have Intel Bluetooth.

Go to your computer manufacturer’s website and update all driver packages for your computer, especially:
Audio drivers
Bluetooth drivers
System chipset drivers
webcam drivers
Important Note:
If you use office 64 bit, Lync 2013 must be 64 bit also. {And vice versa, If you use office 32 bit, Lync 2013 must be 32 bit}
Also check answer of Eric to fix this issue
http://social.technet.microsoft.com/Forums/en-US/e8268935-e97c-4033-9a2e-02734b4390bf/lync-2013-client-on-windows-81-stuck-at-starting?forum=ocsclients
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Firefox does not start in Windows Vista. It can be seen in the task manager that the process is running. But nothing happens. After deleting the process it still does not work.

Are there any issues with Firefox 10 and Vista? IE works.

Hi webero,
There are no Known Issues that I am aware of. You should take a look at [[Firefox is already running but is not responding]] and our article called [https://support.mozilla.org/en-US/kb/Firefox-not-start Firefox will not start].
Hopefully this helps!

SAP Web Dispatcher does not start as windows service

Hi,
I have successfully installed and configured SAP Web Dispatcher. When I start the web dispatcher from command prompt, it works fine. I created a windows service for web dispatcher using the command
ntscmgr install sapwebdisp -b "c:\program files\sap\sapwebdisp\sapwebdisp.exe"
-p "service pf=sapwebdisp.pfl -cleanup -auto_restart"
The command successfully created sapwebdisp service. The service also starts fine, but web dispatcher does not get started.
Any ideas experts?

Hi,
Ok. Few suggestions.
1. Can you review the SAP note:
552286 Troubleshooting for the SAP Web Dispatcher
2. When you said: "web dispatcher does not get started ", what error you got ? Can you be more details here ?
3. Please check the trace file dev_webdisp" that generated in the work directory. If the log entries is not abvious, increase the trace level to 2 or 3, and reproduce and re-check the trace file.
4. What is the output of the command "sapwebdisp -v"
5. How about sapwebdisp.pfl ? Are those settings correct ?
Hope this helps.
Regards,
Vincent

Satellite A305D-S6848 does not start up - Windows failed to load

SCREEN SAYS "Windows failed to load because a required file is missing, or corrupt.."
file: ntoskrnl.exe
status: 0xc0000098
I DO NOT HAVE AN INSTALL DISK AND DONT KNOW HOW TO GET SYSTEM BACK UP AND RUNNING??
CAN SOMBODY PLEASE HELP ME ???

Hi
It seems to be a Toshiba US notebook series and therefore the recovery process might be different as on Toshiba European notebooks
However, the recovery procedure should be mention in user manual. Check this
Try firstly this:
Power up the unit and press F8.
Then choose Safe Mode and try to boot the Windows in safe mode.
If it does not work, try Repair the Computer option.
I think the notebook should be equipped with HDD recovery. This means that you could recover the unit without the usage of the recovery disk.
As mentioned this is US notebook series and as far as I know you have to press 0 button immediately after the notebook has been powered up.
This should start the recovery

Reader 8.1.3 installer does not start on Windows 2003 x64

Similar Messages

Maybe you are looking for