Reading Application ID in WD ABAP application

Hi All,
        I have three Application ID's ID1, ID2 and ID3 and i set this in my URL which i make use of to call this application which in turn sets application parameter value, may i know how i can read this ID in my view ?
Regards,
Anoop

Hi Anoop,
You could transfer the value using the context. There are two different options possible:
(a) Create a node at the component controller and map it to your window and view.
(b) Create a node at the window, declare a controller usage at the view and map the node into the view.
Best regards,
Thomas

Similar Messages

  • Unable to load ITUNES onto PC HP, windows 7 Home Version.  Error message reads "Application Application Support not found".  "Unistall and reload".  I have done that 4 times on Explorer and Firefox without success.  Help??

    Unable to load ITUNES onto PC HP, windows 7 Home Version.  Error message reads "Application Application Support not found".  "Uninstall and reload".  I have done that 4 times on Explorer and Firefox without success.  Help??

    I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

  • Open specific PDF document in Windows 8.1 Reader Application without File Associating

    I have a user case where i need to be able to open one spesific PDF document without changing "File Associating" from Adobe Reader. Is there a good way to open the reader app and a document from CMD or simular? I know I manual can use "Open
    With" but this is not a option because I need to do this in one operation from a shortcut on the start screen.

    Hi,
    For command option, you may find adobe reader application path, 
    just like that:
    C:\Program Files (x86)\Adobe\Reader 11.0\Reader>AcroRd32.exe 
    "D:\example.pdf"
    Alex Zhao
    TechNet Community Support

  • In 10.8, the file info window's "Kind:" read "Application"/etc. for 64-bit items and "Application (32-bit)"/etc. for 32-bit items. The "(32-bit)" part seems to have been lost in Mavericks. How do I determine if an item is 32 or 64-bit in Mavericks?

    In 10.8, the file info window’s “Kind:” read “Application”/etc. for 64-bit items and “Application (32-bit)”/etc. for 32-bit items.
    The “(32-bit)” part seems to have been lost in Mavericks. How do I determine if an item is 32 or 64-bit in Mavericks?

    1. Launch System Information into its 'report' mode. (A quick way to do this is by holding down the option key while clicking on the Apple menu item, which causes "About this Mac" to change to that.)
    2. From the list on the left, under "Software" click on "Applications." (If you don't see the Applications item, click on "Show more information" from the "File" menu.)
    3. Wait a minute or so for the report to finish.
    4. The last column in the report is "64-bit (Intel)." (You may need to scroll the window to the right to see it.) Click on that heading to sort the list alphabetically. Anything with a "no" is 32 bit.

  • Are plugins able to create graphical controls children to the Acrobat/Reader application?

    Hello,
    in the documentation I read　
      Acrobat Viewer layer 
    The Acrobat Viewer (AV) layer enables plug-ins to control Acrobat and modify its user interface. Using AV methods, you can, for example, add menus and menu commands, add buttons to toolbars, open and close files, display simple dialog boxes, and perform many other application-level tasks.
    I ask if it is possible that a plugin creates a graphical control like others applications can usually do and put it as a legitimate child of the Acrobat/Reader application, for example over a pdf page, and get events and so on.
    Thanks in advance

    Sure.
    From: Adobe Forums <[email protected]<mailto:[email protected]>>
    Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Date: Wed, 26 Oct 2011 03:33:53 -0700
    To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
    Subject: are plugins able to create graphical controls children to the Acrobat/Reader application?
    are plugins able to create graphical controls children to the Acrobat/Reader application?
    created by DevAcro<http://forums.adobe.com/people/DevAcro> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3990771#3990771

  • My Reader application on Mac crashes as soon as I connect my PRS-T1 to the USB.

    As soon I connect my PRS-T1 into USB and the Reader program starts syncing the Reader application (on my MAC) crashes. It happens every time, and I cannot sync books or anything.
    I have updated the reader and reinstalled my reader application on my mac and the PRS-t1 is running the latest firmware.
    Below is the error I get:
    Process: Reader [620]
    Path: /Applications/Reader.app/Contents/MacOS/Reader
    Identifier: com.sony.readerdesktop
    Version: 2.0.01 (2.0.01.11080)
    Code Type: X86 (Native)
    Parent Process: launchd [135]
    User ID: 501
    Date/Time: 2013-04-01 19:22:06.945 -0300
    OS Version: Mac OS X 10.8.3 (12D78)
    Report Version: 10
    Interval Since Last Report: 112286 sec
    Crashes Since Last Report: 14
    Per-App Interval Since Last Report: 1586 sec
    Per-App Crashes Since Last Report: 14
    Anonymous UUID: FDDA6CCD-6286-7E55-B053-88F42028DB43
    Crashed Thread: 14
    Exception Type: EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
    VM Regions Near 0:
    --> __PAGEZERO 0000000000000000-0000000000001000 [ 4K] ---/--- SM=NUL /Applications/Reader.app/Contents/MacOS/Reader
    __TEXT 0000000000001000-0000000000f6f000 [ 15.4M] r-x/rwx SM=COW /Applications/Reader.app/Contents/MacOS/Reader
    Thread 0:: Dispatch queue: com.apple.main-thread
    0 libsystem_kernel.dylib 0x9109c7d2 mach_msg_trap + 10
    1 libsystem_kernel.dylib 0x9109bcb0 mach_msg + 68
    2 com.apple.CoreGraphics 0x99016f98 _CGSSynchronizeWindowBackingStore + 131
    3 com.apple.CoreGraphics 0x98fc3569 _CGSLockWindow + 3142
    4 com.apple.CoreGraphics 0x98fc2742 CGSDeviceLock + 313
    5 libRIP.A.dylib 0x94114881 ripd_Lock + 62
    6 libRIP.A.dylib 0x9411434b ripl_BltShape + 451
    7 libRIP.A.dylib 0x94112446 ripc_Render + 389
    8 libRIP.A.dylib 0x9410e0c8 ripc_DrawRects + 546
    9 com.apple.CoreGraphics 0x98fbebcd CGContextFillRects + 144
    10 com.apple.CoreGraphics 0x98fdc75b CGContextFillRect + 32
    etc. etc. etc...
    Solved!
    Go to Solution.

    Hi jaglaser,
    Perform the following troubleshooting steps and check if it helps.
    Disconnect the Reader Digital Book from the computer and close the Reader software. Once disconnected, remove any memory cards you may have installed in your Reader.
    Reconnect the reader and test it for proper functionality. If you are still having the problem, continue to the next step.
    Disconnect the Reader Digital Book from the computer and format the Internal Memory of Reader Digital Book.
    If the problem still happens, turn off your Reader digital book and do a Hard Reset (https://us.en.kb.sony.com/app/answers/detail/a_id/31628/c/65%2C66/kw/31628). After doing a Hard Reset, it will be necessary to authorize your unit again.
    If possible, install the Reader software on another computer to test.
    If my post answers your question, please mark it as an "Accepted Solution."

  • One way sync from Outlook Express gets Unable to read application data error

    I have a BB Flip, 8220, and am trying to use Outlook Express as my Contacts organizer.  I have started Outlook express "vanilla" and only have one records in Outlook Express.  I have 34 records in my BB Contacts.  When I run synchronize (and again, I am trying to do this one way, from Express to BB) I get the error "Unable to read application data", "Processing Device Address Book", "Record 34 of 34 Records".
    I have read many of the threads.  I have checked the RIM.log file and it says one way sync.  Any clues on how to fix this?  I am on Desktop 4.6, do I need to upgrade to 4.7?
    Please advise.
    Thank you.
    Solved!
    Go to Solution.

    Well I fixed the problem.  What I did was run a Backup using the desktop mgr software, I then ran a restore, but I used the Advanced option so that I could open the ipd backup file and then select just the contacts database and push that from my computer to the device (using the right arrow copy button in the middle of the Advanced window thingy).  I then reran the Sync and it WORKED!
    Doing the backup and restore must have fixed the corrupted record on my phone.  Wonderful.  I was nervous, but it worked jst fine.

  • Deleting old Adobe Reader applications...

    I have downloaded the newest Adobe Reader application but still show multiple older versions of Adobe Reader(7.08 & 8) in my Applications folder.
    Can I delete and trash these without losing some necessary files to run the 9 version only...?
    I also run Classic 9 OS occasionally for older applications and in that Application folder there is an Acrobat Reader 5.0 which I don't know if I need to have or if I can update it to a newer version that would work with Classic 9.

    I would say to play it safe you might want to delete the Acrobat files (maybe archive them just to be safe) before doing your upgrade. I don't know but it is possible the Acrobat Reader installer may have an uninstall button. Programs like Acrobat and Office like to put files all over the place so if you really want to make sure all the old is gone you would need to do a lot of manual weeding. However, it is slightly possible that when you run the installer it might ask if you want to get rid of earlier versions. Try running the installer part way and see what options it offers. Usually you can cancel before installing if you decide you need to do something before installing.
    Now, there's OS9 and there's Classic. OS9 is when you boot to OS9 and OS9 is totally in control. When you boot to OSX and run Classic, it is OSX that is really in control and it is pretending (emulating) OS9 +at the same time+. If you start a program written for OSX while in Classic it will just start the program in OSX. If you actually boot to OS9 then it is extremely unlikely it will run the OSX version. There were some programs written around the transition period that would run on both, but I doubt any recent release would. The bottom line is, if all you do is run Classic then you could also get rid of your version 5 too.

  • MIME Plugin Support must be able to read application/x-mwf

    I also have this problem as Mr. Michael Mccarthy3
    Can anyone tell me what kind of MIME Plugin Support do i need to download, inorder to view map website? It must be able to read application/x-mwf.
    Any help would be greatly appreciate too anyone care to help?
    Regards
    norman_imac

    Hi spacesuiter,
    Thanks for the response, I have visited the site and try to down load what is need but yet i can not see the map display on my screen. do you have any more ideas. I have both IE and Netscape browers.
    Many thanks
    Regards
    Norman

  • I have the 4S and downloaded a fax reader application that converts the TIFF file to JPEG, solution they recommend is to go to settings, app-general-location services but I don't see a way to do this on my phone, help!

    I have the 4S and downloaded a fax reader application that converts the TIFF file to JPEG, solution they recommend is to go to settings, app-general-location services but I don't see a way to do this on my phone, help!

    If you are looking for this area, in the newer iOS, it is Settings>Privacy>Location Services. I'm not sure what you are trying to accomplish here, so I cannot give you more information. Is it possible you are trying to give this program access to photos in your Camera Roll? Please provide a little more information.

  • Basic Java Card/Card reader application question...

    Hello all,
    I have a basic question regarding java card applications. Do you always require a host application(on some PC/workstation server) to send and receive data from the java card (through the card reader using any of the available interfaces like OCF etc) or can you have a stand alone card reader application that interacts with java cards inserted into the reader?
    For example..in a mass transit application, you have a reader that reads an e-purse smart card that is swiped and does the necessary deduction of the fare from the card. In this case, where does the host application reside (there is no other host system involved other than the reader here? ) How is this done? Does the card reader carry the necessary code to interact with cards?
    Any information is greatly appreciated.
    Thanks for the time.
    Regards,
    Ajay

    Documentation is provided by the terminal vendors. Just think of it like this, there are drivers that read the card, but don't know what to do with the data without some form of middleware to process it.

  • How to get files saved on nokia lumia 900 ADOBE reader application to pc or cloud?

    Hi  i am using adobe  reader X VERSION 10.1.2 BUILD 20121119 ON MY MOKIA LUMIA.  i have downloaded some files and they are only appearing in adobe reader application. how can i email them out or share to any cloud serviece. my concern is that there is no option to get those files to pc with phones sync software ZUNE. Please help

    Thank you for this fast answer; meanwhile I found further possibilities to solve my problem within the community, but each requires access to internet. Under these circumstances your suggestion seems to be the simplest.
    With best regards
    Von: sflynn121 [email protected]
    Gesendet: Mittwoch, 28. August 2013 14:04
    An: adobefan2013
    Betreff: Workspaces.Acrobat.com How to get access to PDF files on iPAD by "Adobe Reader for iPAD?"
    Re: How to get access to PDF files on iPAD by "Adobe Reader for iPAD?"
    created by sflynn121 <http://forums.adobe.com/people/sflynn121>  in Workspaces.Acrobat.com - View the full discussion <http://forums.adobe.com/message/5633375#5633375

  • XulRunner, "couldn't read application init

    hello,
    on FF vers 4.0, vista 32, on opening I get message: xulRunner, "couldn't read application init"
    impossible to open FF
    several install and desinstall
    can you help please.
    best regards

    Do a clean (re-)install:
    * Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Do not remove personal data if you uninstall the current version.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Error reading application-client.xml,Urgent

    Hi ,
    I am getting this error,can anyone suggest something for this ?
    found error javax.naming.NamingException: Error reading application-client descriptor: No location specified and no suitable instance of the type 'com.crm.Dao.Customer.CustomerData' found for the ejb-ref CustomerData
    Waiting for reply,
    Regards,
    Mandar

    In the client deployment under META-INF you should have the application-client.xml.
    Can you CustomerData - home,remote etc. be seen from the clientside classpath?
    Have they been deployed to OC4J?
    Looks like it is not being found either on the server or on the client.
    Cheers,
    Ashok

  • Some documents to read as a starter in abap objects.

    Hi All,
    Need a help, I have read the basic concepts in ABAP objects, uptil cath try....... and event handling.
    However once this basoc reading is over, suggest me some additional links to read from, i wanna read more and learn since in my company there isnt much of exposure to object oriented concept in ABAP.

    Hello anu,
    Check out these links
    www.amazon.com/ABAP-Objects-Introduction-Programming-Applications/dp/0201750805
    www.amazon.com/ABAP-Objects-Reference-Horst-Keller/dp/1592290116
    searchsap.techtarget.com/sDefinition/0,,sid21_gci877494,00.html
    help.sap.com/saphelp_nw2004s/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
    help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
    www.erpgenie.com/abap/index.htm
    en.wikipedia.org/wiki/ABAP
    www.sappressbooks.com/downloads/h958_preview.pdf
    <b>Reward points if helpful    :-)</b>
    Thanks,
    Sachin

  • Read Data From DSO - In ABAP Program

    HI Friends,
    Can any one tell how to read Data from a DSO in a Abap Program on BI System itself......
    Which is the better way to read data from DSO in Abap Program... Is it
    1. Reading Data Directly From the Active Table Of the DSO ... or
    2. Reading Data From DSO....
    In case of reading data from DSO.... Which function module is used to do this work....When i searched the forum i came across 2 function Modules.... BAPI_ODSO_READ_DATA_UC and RSDRI_INFOPROV_READ..... Please let me know which one should be used....
    Regards,
    Shyam.

    Hi Shyam,
    The active content of any ods will be stored in the database tables( SE11) with the naming convention /BIC/A<odsname>00 for Custom-defined DSO and /BI0/A<odsname>00 for Business content delivered DSO.
    For example if the technical name of the ods is TEST , then the active content table name in SE11 will be /BIC/ATEST00.
    You can write your own program to read the contents of this database table.
    Regards,
    Krishna.

Maybe you are looking for