Reading notes from PB0024/PA0024

Hi,
I am trying to read/write the note from PB0024 and I am not talking about the note from the 'Maintain Text' from the main menu 'Edit' of the usual PA infotypes. If you create a PB or PA0024, you will be able to have a 'note' icon on the same line of the record.
If you click the icon, you will be able to maintain the note but it looks different from the usual note. It is like a wordpad kind of environment.
I am trying to insert the record in PB0024 with the note via a customized program which I had developed. But so far, I had only managed to insert the record in PB0024 but failed in the note part. Appreciate if I can get some help. I had tried Read_text and HR_ECM_READ_TEXT_INFOTYPE. But both do not seem to work.

YES.. you are correct.. the following worked for me to read the notes on 0024.. may be you can try something similar with the SAVE_TEXT function call to save the notes..
report  zp_0024_read_notes.
* assuming you have the persno & Qualification id already
data: w_tdname type tdobname.
data t_lines like tline occurs 0 with header line.
select tdname into w_tdname up to 1 rows
              from stxh
              where tdobject = 'HR_TEMNOTE'
                and tdid = 'TEM1'
                and tdspras = sy-langu
                and tdname like '%00006391%'  "pernr
                and tdname like '%50000353%'. "qual id
endselect.
if sy-subrc eq 0.
  call function 'READ_TEXT'
    exporting
      id                      = 'TEM1'
      language                = sy-langu
      name                    = w_tdname
      object                  = 'HR_TEMNOTE'
    tables
      lines                   = t_lines
    exceptions
      id                      = 1
      language                = 2
      name                    = 3
      not_found               = 4
      object                  = 5
      reference_check         = 6
      wrong_access_to_archive = 7
      others                  = 8.
  if sy-subrc eq 0.
    loop at t_lines.
      write:/ t_lines-tdline.
    endloop.
  endif.
endif.
~Suresh

Similar Messages

  • HT4890 reading notes on icloud

    How do i read notes from my iphone on my laptop (Mac) via iCloud?  Where do I find the notes?

    Welcome to the Apple community.
    Notes (providing they are entered into an iCloud account) can be found in your mail appleication on your notebook. They are found in the source panel of the mail application.

  • Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

    Hello. Most of the engineers in developer exchange are more familiar
    with NI products. Contacting ICS for technical support is a better
    course of action.

  • Can not read data from URL!

    Hello,
    I want to read data from URL (http://84.100.130.82:8000/;stream.nsv). But can not do it. Because when try to call function openDataInputStream() shows this error: java.io.IOException: response does not start with HTTP it starts with: ICY. How I can fix this bug?
    HttpConnection c = null;
    InputStream is = null;
    OutputStream os = null;
    StringBuffer b = new StringBuffer();
    String           response,
    responseLitle;
    c = (HttpConnection)Connector.open(“http://84.100.130.82:8000/;stream.nsv”);
    os = c.openOutputStream();
    os.flush();
    is = c.openDataInputStream();     // ERROR CODE HERE
    int ch;
    // receive output
    while ((ch = is.read()) != -1)
    b.append((char) ch);
    response = b.toString();Regards, Ramunas

    Hi, I�m trying to do the same as above, get MP3 from a Shoutcast server.
    I got the same fault ("response does not start with HTTP it starts with: ICY") when I tried to open an HttpConnection as bellow:
    ============================================
    HttpConnection conn = (HttpConnection) Connector.open("http://64.236.34.196/stream/1074");
    Then I tried to open a socket connection as bellow:
    ======================================
    SocketConnection conn = (SocketConnection) Connector.open("socket://64.236.34.196:80");
    String get = "GET /stream/1074 HTTP/1.1";
    DataOutputStream os = conn.openDataOutputStream();
    os.writeUTF(get);
    InputStream is = conn.openInputStream();
    But then I got the following error:
    =========================
    java.lang.SecurityException: Target port denied to untrusted applications
    Could someone help me to find out what is going on?
    Thanks a lot!

  • TcpListener not working on Azure: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

    Hi Everybody,
    i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
    I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
    Here the ServiceDefinition.csdef file content:
    <?xml version="1.0" encoding="utf-8"?>
    <ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
    <WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
    <Imports>
    <Import moduleName="Diagnostics" />
    <Import moduleName="RemoteAccess" />
    <Import moduleName="RemoteForwarder" />
    </Imports>
    <Endpoints>
    <InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
    </Endpoints>
    </WorkerRole>
    </ServiceDefinition>
    This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
    namespace TcpListenerWorkerRole
    using System;
    using System.Net;
    using Microsoft.WindowsAzure.ServiceRuntime;
    using System.Net.Sockets;
    using System.Text;
    using Roche.Emac.Infrastructure;
    using System.IO;
    using System.Threading.Tasks;
    using Microsoft.WindowsAzure.Diagnostics;
    using System.Linq;
    public class WorkerRole : RoleEntryPoint
    public override void Run()
    // This is a sample worker implementation. Replace with your logic.
    LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
    TcpListener listener = null;
    try
    listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
    listener.ExclusiveAddressUse = false;
    listener.Start();
    LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
    catch (SocketException ex)
    LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
    return;
    while (true)
    Task.Run(async () =>
    TcpClient client = await listener.AcceptTcpClientAsync();
    LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
    NetworkStream networkStream = client.GetStream();
    StreamReader reader = new StreamReader(networkStream);
    StreamWriter writer = new StreamWriter(networkStream);
    writer.AutoFlush = true;
    string input = string.Empty;
    while (true)
    try
    char[] receivedChars = new char[client.ReceiveBufferSize];
    LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
    int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
    char[] validChars = new char[readedChars];
    Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
    input = new string(validChars);
    LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
    try
    string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
    writer.Write(orderResultFormat);
    catch (Exception e)
    LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
    client.Close();
    break;
    catch (Exception ex)
    LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
    client.Close();
    break;
    }).Wait();
    public override bool OnStart()
    // Set the maximum number of concurrent connections
    ServicePointManager.DefaultConnectionLimit = 12;
    DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
    RoleEnvironment.Changing += RoleEnvironment_Changing;
    return base.OnStart();
    private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
    // If a configuration setting is changing
    LoggingProvider.Logger.Info("RoleEnvironment is changing....");
    if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
    // Set e.Cancel to true to restart this role instance
    e.Cancel = true;
    As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
    Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
    2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
    2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
    2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
    2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
    2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
    System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
    at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
    --- End of inner exception stack trace ---
    at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
    at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
    at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
    at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
    I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
    As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
    For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
    I'm using Windows Azure SDK 2.3
    Any help will be very very welcome!
    Thanks in advance!
    Javier
    En caso de que la respuesta te sirva, porfavor, márcala como válida
    Muchas gracias y suerte!
    Javier Jiménez Roda
    Blog: http://jimenezroda.wordpress.com

    hi Javier,
    I changed your code like this:
    private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
    public override void Run()
    TcpListener listener = null;
    try
    listener = new TcpListener(
    RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
    listener.ExclusiveAddressUse = false;
    listener.Start();
    catch (SocketException se)
    return;
    while (true)
    IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
    connectionWaitHandle.WaitOne();
    The HandleAsync method is your "While (true)" code:
    private void HandleAsyncConnection(IAsyncResult result)
    TcpListener listener = (TcpListener)result.AsyncState;
    TcpClient client = listener.EndAcceptTcpClient(result);
    connectionWaitHandle.Set();
    NetworkStream netStream = client.GetStream();
    StreamReader reader = new StreamReader(netStream);
    StreamWriter writer = new StreamWriter(netStream);
    writer.AutoFlush = true;
    string input = string.Empty;
    try
    char[] receivedChars = new char[client.ReceiveBufferSize];
    // LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
    int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
    char[] validChars = new char[readedChars];
    Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
    input = new string(validChars);
    // LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
    try
    string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
    writer.Write(orderResultFormat);
    catch (Exception e)
    // LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
    client.Close();
    catch (Exception ex)
    //LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
    client.Close();
    Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
    ) and this post (http://stackoverflow.com/a/5420788).
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up.  when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

    when I was talking on phone, suddenly the phone was switched off.
    i tried to switch it on but it gave the message....connect to itunes for set up.
    when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
    I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
    after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
    What to do now?????? Customer service people say..it is hardware problem

    If it's a hardware problem, then the phone will need to be replaced.
    There is no magic that can fix a hardware problem.

  • My reader will not open a PDF file that I have downloaded from a government web site (an application form) - it states that the file is not good.  I can open on the web site but not from my mac computer

    My reader will not open a PDF file that I have downloaded from a government web site (an application form) - it states that the file is not good.  I can open on the web site but not from my mac computer.

    Maybe this: http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html ?
    Do you have a link to that document?

  • How to read data from a CLUSTER STRUCTURE not cluster table.

    Hi,
    how to read data from a CLUSTER STRUCTURE not cluster table.
    regards,
    Usha.

    Hello,
    A structre doesnt contain data.. so u cannot read from it. U need to find out table of that structure and read data from it.
    Regards,
    Mansi.

  • Fingerprin​t reader not working after resuming from sleep

    I kind of mentioned this problem in a previous post and was directed here http://www-307.ibm.com/pc/support/site.wss/documen​t.do?sitestyle=lenovo&lndocid=MIGR-67245 which is a patch that could possibly fix it.This patch didn't work. What is happening is when my laptop comes back from sleep either the fingerprint reader is unresponsive, it says "waiting..." at the top of the screen instead of the normal scan message and is unresponsive, or in some cases when I click other credentials it shows a third account (first is my account, second is the reader account,and the third is a stop sign thing that says the fingerprint reader isn't attached). When I sign in with my normal password and try to go to the fingerprint software it pops up a little window that is labeled Lenovo Fingerprint 2.0 and the message is "Pleae wait...".
    Other then returning from sleep the fingerprint reader has been working fine. Any suggestions are greatly appreciated, thanks.
    Edited to add patch link.
    Message Edited by Skurvy_Pirate on 09-22-2008 07:40 PM
    Solved!
    Go to Solution.

    Well I got it working again but I'm not exactly sure how. I will go over what I went through so you guys can get an idea and possibly fix it. To start off I talked to MS support and I worked with them for a really long time. They tried intstalling different drivers (other then AuthenTec) and anytime we did that it would say "Fingerprint reader not available" at the login. They tried changing the power settings and which devices could wake up my computer and that had no effect either. I called Lenovo and they basically just told me to download the software that was already on the computer and change the option to have it wake up the computer, which doesn't exist. They were very unhelpful.
    What eventualy got it working (and it's been working so far), is uninstalling the driver and software. Then reinstalling it all and installing the patch linked above. The first time I installed it I just double clicked it and went through the installation process. But you need to go into the folder it installs it into (C:\DRIVERS\VISTA\FPIRPON\) and double click FPIRPOn.reg which will add the fix to the registry. On top of this I also went into Device Manager and unchecked the box that allows the computer to turn of the fingerprint reader under Properties->Power Management for the device. The last thing I did was do a registry edit to force the USB to reset when waking from sleep. I found the registry edit here http://support.microsoft.com/kb/928631/en-us.
    So I am pretty sure it was the patch that fixed it when I correctly installed it because I had tried both the power management thing to keep it from getting turned off AND the registry edit and it didn't work. I also thing that Vista SP1 fixes what the registry edit does, but I tried it anyways because I was desperate haha. I'm going to undo the registry edit and power management thing one at a time and see if it still works. If it doesn't keep working I'm guessing it's a hardware problem and going to call Lenovo to get it fixed.
     Anyone who is having this problem I would suggest they try the patch in the link that I first posted (http://www-307.ibm.com/pc/support/site.wss/documen​t.do?sitestyle=lenovo&lndocid=MIGR-67245)and follow the installation instructions carefully. Good luck!

  • How can I save adobe reader file from gmail into my adobe reader app?? i would like to open one file in place where I'm not able to access internet and for that reason i would like to save it. is that even possible?

    How can i save adobe reader file from my gmail into my adobe reader application. or is there any other way i can save it into my phone so I'm able to open in any situation not just from my gmail???

    Long hold on the document in mail and it should give you the open in... option, select adobe reader and the file is now saved locally for viewing even while offline.

  • PI sender communication channel not reading files from NFS directory

    Hello,
    I have a sender communication channel configured to read file from NFS directory which is on ECC server. A program in ECC generates the file and puts it on the ECC server in the output directory. PI sender communication channel is supposed to pickup this file and process it. If I give the NFS path as the source directory, I am getting error: Configured source directory '//Server/DIR/OUT' does not exist. I tried putting '
    Server\DIR\OUT' too but same error. Do I have to add the NFS path of ECC into PI as logical path?
    Any suggestions?
    Thanks,
    Sangita

    Hello Sangita,
    Your ECC server is an external system, therefore you need to activate FTP service in that system and use the transport protocol FTP:
    http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
    You can use NFS protocol when you have a local directory in XI server.
    Best Regards,
    .Luis Bernal.

  • How to read images in jsp from an absolute path not from the web app?

    hello there
    i want to read images from an absolute path on the hard disk not from the images folder in the web application
    how to do that?
    thank you

    Ok. You don't give the servlet the full path of an image. You just give an image id in query string. E.g.
    http://my.server.com/imageServlet?id=12Id can be whatever: number as well as name.
    Then, in your servlet You get this id, then read an image file that is mapped for this id and sends it to browser via servlet output stream.
    On the jsp page you write sth similar to:
    <img src="http://my.server.com/imageServlet?id=12"/>and your image will be displayed using your servlet. The image file path is needed only in the servlet code to open the stream to file (image file can be stored wherever you want in file system), read it and write to output stream. Read the tutorial accessible via link I provided in the previous post.

  • Error: Could not read Metadata from Portal Database !

    Hi All!
    My problem is when i am trying to open the portal page (Oracle 10G)
    http://domain/portal/page?_pageid=6,1,6_13&_dad=portal&_schema=PORTAL
    then i have an Error: Could not read Metadata from Portal Database.
    And i do not know why because everything is up and running. I can connect and browse my database schema with portal user. I can connect to pls/orasso and where ever i want.
    [07/Feb/2006:00:57:23 +0100] "GET /pls/portal/htp.p?cbuf=Test HTTP/1.1" 200 5
    plz help i am trying to fix this in the last 2 weeks :)
    thx kEndE

    Hi Andreas,
    I've changed the permissions to 775 and changed the ownership of /sapcd (volume name) to orasid:dba (including all files within the staging area /sapcd/ora-patch).
    So the permissions and ownership seems to be fine.
    I've also ran your suggested commands but the issue still exists.
    I'm now liasing with our UNIX guy to check if there is any underlying permission issues on the volume (sapcd) that may be causing this problem.
    In the mean time, let me know if you have any further thoughts.
    Thanks,
    Chris

  • Failed to read data from report file Reason: The table could not be found.

    BO Enterprise XI R2, cannot publish crystal reports using the publishing wizard.
    Failed to read data from report file Reason: The table could not be found.
    Any ideas to get around this would really help out.
    Regards

    Connection used Views, ODBC System DSN is setup properly.
    Approach for import from business view manager and import wizard.  both methods failed to import the Business View and underlying reports.
    I figure I may have imported the Business View wrong? From Business View Manager I exported from my dev server then imported to prod server.
    Apparently I learned exporting my business view also includes the Data Connections that the Business Views are dependent upon.
    So which ever folder you specify it copies it there. Originally the all Data Connections Resides on the root folder. To return it to the original location. I deleted what I had exported. Exported this time to the root folder, then only deleted the business views, foundation, elements. Then exported again to the folder where I intended then only deleted the Data Connection.
    Makes any sense? So I then had to re point the business views and all the dependent objects to the data connection that resides in the root folder.
    I tested the connection, it works fine. I properly updated my crystal reports to the business view in production. Did a sample extract it works as expected.
    However when i try to publish, either from Crystal or Publish wizard i get the same error?
    As a work around i am thinking, after updating the business view in the crystal reports, shall i re map the fields?? or reexport the business views again?
    Any help will be surely appreciated.

  • IB Error: Unable to read symbols from "UIKit" (not yet mapped into memory)

    I created a simple view program for iPhone, using IB to add a button and a label, once the button is clicked, the label text is changed.
    I am able to compile it fine, and ran it. The program/view showed up. But when I clicked on the button, the console showed this message:
    This GDB was configured as "i386-apple-darwin".warning: Unable to read symbols for "/System/Library/Frameworks/UIKit.framework/UIKit" (file not found).
    warning: Unable to read symbols from "UIKit" (not yet mapped into memory).
    I checked UIKit info, it's physically (full path) at:
    /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS2.0.sdk/System/Lib rary/Frameworks/UIKit.framework
    The relative path to SKD is:
    System/Library/Frameworks/UIKit.framework
    I'm running the latest SDK beta 8, OS X 10.5.4 latest update.
    Anyone had this bizarre problem? I was able to run all Apple samples fine.
    Please help!
    THanks!

    The answer is mentioned in a few other posts, but I thought I'd repeat it here, so that it's easier to find this solution in the future.
    I got the same problem trying to build an iPhone-Simulator application using another build process -- in this case, Boost Build. When I tried to run the program, it gave me the same nonsensical dynamic-library error.
    The problem is that the application you built for the iPhone Simulator is NOT a real application, even though it looks like one. You need to run it from within Xcode.
    In my case, I got around the problem by building the GLPaint sample using Xcode, copying over the executable it generated with the one I generated via Boost Build, then running GLPaint (actually my program now) from within Xcode. Then it worked.
    So far, it seems that Macintosh and iPhone are very unfriendly platforms to someone that's trying to port an existing project. Any attempt to do something, without completely buying into the Apple way of doing everything, leads to a torrent of cryptic undocumented errors. Even an old Unix guru like me can't keep up.

Maybe you are looking for

  • How do I add my own artwork to itunes 11?

    I do the stuff on the track info 'artwork' window click add, I open the jpg I want and then move to next track but it won't save. so on the summary page it says no artwork available.Any tips? Thanks

  • Features I´d like to have in Mac OS.

    To be honest I tested the windows 7 for a week and I found one feature really amazing. and it was shaking the selected windows to minmize all other windows. I also liked the drag the window to the left/right side to make it half-screen. or drag the w

  • Problems using IMPORT method

    Hello, We have just upgraded from 4.6c to ECC6. In several programs we used Import method with the following syntax in 4.6c: import (tname) to &1 from database zzhilan(zz) id zkey1(16) . However in ECC6 , since it didn't compile we changed it to :  

  • Error importing .NEF files

    it is already 1 year since i switch to mac... and now i was re arrange my staff also my photos i have a lot of shots taken with a nikon d50 in .NEF format and modified on PC with a RAW software now if i try to import thos folder i get an error for ea

  • Ratelimiter with IPv6 class-map on Catalyst 3750

    Hi, I've the following problem. It's my goal to ratelimit incoming IPv6 traffic dependent on the destination IP address range. On a Catalyst 3750 (Image: c3750-ipservicesk9-mz.122-55.SE1.bin) I've set up the configuration as follows: mls qos ipv6 acc