Ready to give up on I Web, help!

I have been keeping a web page of a project I have been working on. I web worked fine till the 1.1 upgrade. After upgrading I was not able to update my I site. I ended up, after a week of trying to update, converty back to I web before 1.1 update. To top matters I lost my web stuff and ended up having to redo all of my web site pages.
I figured Apple would have this figured out by now and it would be safe to upgrade again as there were some nice new features. Will I figured wrong. I can not updated from Home or work or anywhere else for that matter. I have been trying at all different times from many different locations and always get the same error. I can access my Idisk
Is there anyhope out there or should I just learn to make my own web site somewhere else?
Power Book G4   Mac OS X (10.4.6)  

Thanks for the reply.
The error message I get is;
Publish Error
Publish failed due to a network error. Check your internet connection and try again. (OK button)
Internet Connection,
At Home I am Satellite but with a fast upload (for satellite) of 256. At work I am on a wireless to our plant then ethernet in the building. I am not sure the upload speed on this. I have also tried in cable and other DSL and it does not seem to make a difference.
I went through all suggestions last time I had the problem and none worked. I have not done it again. In reading though the forum replies they have been spotty at best at addressing a problem that I feel is in the updated version of I web.
I guess I'm just upset that it works fine if I go back to I Life 6 and do not updrade but the moment I upgrade I can no longer upload I web. Not use to having this kind of problem on a Mac.
Again thanks for the reply, I'm not sure if anyone can help or not but would love to be able to get this to work without having to go back to Ilife 6!

Similar Messages

  • Is it possible to open web help as a normal new tab and not as pop-up?

    Hello,
    Is there a way that I can open context-sensitive web help in a new normal tab instead of having it as a pop-up so we can get rid of the pop up blocker?
    Thank you,

    This is set from the calls. Depending on precisely how your developers are calling the help, a small change in your output may be required.
    You can give the following pages to your dev:
    Overview of options and how to use it: Calling Webhelp
    All your options in detail: Context sensitivity in WebHelp and FlashHelp
    Kind regards,
    Willam

  • I am ready to give up on the Iphone RE:  emails

    I have a few more days left in my return window, and I am seriously considering it. I wasn't able to send emails, but receive them, so I took the iphone back to AT&T and he redid my settings, tested it while I was there and was able to get the phone to send an email. I emailed a test email to my friend and almost immediately got a response from her that she had received it. I was able to reply with no problem. Now, a couple of hours later, I am at home and I can't get it to send an email. It seems to get hung up on sending it and takes forever for it to finally give me an error message which usually says something to the effect of a failed server or something. I have wanted this phone for so long and want to love it, but honestly, I am ready to give up on it and get something else. Can anyone help me figure out what I am doing wrong????
    Heather

    Ok, that CWMX.COM bit is proof now to me it is because BellSouth blocks you from sending unless on their network. that is a free server (workaround) to send. It is needed when on Edge. But now that you are home and on WiFi (which is a prefered connection as it is MUCH faster) now while on WiFi, you ARE on their network and they don't like you using the free server. You need to have it set to what your network (ISP) wants (which is what you computer has setup on it if you look at those settings, odds are same as incoming).
    So here is the issue you have.
    The guy set it up that you can send email anytime you are on Edge (which will be when you are not home on your WiFi network).
    When at home, you cannot send email while on wifi unless you temp. turn off WiFi (where you just said you saw where). If you turn it off, you can send. Then you can turn WiFi back on to get fast speed with internet again.
    So all in all not too bad. When not at home, you can send. When at home...well you have your computer for email....but if you need to send via phone, you have to turn off wifi.
    Once again, this is BellSouth stopping you not the iPhone. You may consider getting a free email account elsewhere (gmail for example) and telling all your friends to email you there from now on and just use bellsouth for junk mail, shopping, etc.

  • Absolutely Stumped and Ready to Give Up

    Hi all...
    I've been searching and searching through the forums and the help articles to find out how to fix this problem, and I absolutely cannot figure it out. It makes no sense to me.
    I cannot get the binding navigator to save changes to the database. I've created a new project, tried on different computers and still does not work no matter what I do.
    Here's what I've done so far. I've added a new form to my project, completely blank and new. I've taken a Table from an SQL database and dragged it from the Data Sources Window onto the form, just like I should do. As usual, the bindingnavigator, bindingsource,
    tableadapter all show up. When I check to see what is in the SAVE button, the following code is present, which all seems fine to me:
    Me.Validate()
    Me.Table2BindingSource.EndEdit()Me.TableAdapterManager.UpdateAll(Me.Database1_Data_Set)
    When I run it, I can of course add rows, delete rows, change data in rows with the binding navigator, but anything I do does not show up in the database after having clicked the save button.
    I've checked to see if the binding source is recognizing that there is changes to be made (.haschanges) and it indeed knows that there's changes to made. I've verified this a couple ways, one way is by doing this:
    MsgBox("hi")
    Me.Validate()
    MsgBox(Me.Database1_Data_Set.HasChanges)
    Me.Table2BindingSource.EndEdit()
    Me.TableAdapterManager.UpdateAll(Me.Database1_Data_Set)
    MsgBox(Me.Database1_Data_Set.HasChanges)
    The first messagebox I used to make sure that the clicking on the save button was actually fired. Indeed it is. I have it messagebox me before the .updateall and after...which comes up as it should, which is haschanges=true before the update and haschanges=false
    after the update. I have even tried adding the acceptchanges command after updating all. None of this works. It never saves to the database. I've trapped the code in a TRY and catch with a messagebox if there are any errors, and no errors come up.
    I've tried the infamous changing of the .xsd and .mdf property CopytoOutputDirectory to if newer and even tried do not copy, and none of these fix the problem, it still persists on not saving to the database. The database I am using is a very simple database,
    literally one column with generic words like 'red' 'blue' green' frank', etc. I made it simple on purpose so I could see if it was a table issue, but still no saving to database.
    This is a local database. I'm completely stumped and ready to give up. No matter what I do, it does not work. I need help on this if you're willing.
    One thing I have noticed is that after I click the save button, if I then close the form but stay in runtime, then re-open the form, the data that I changed is still showing on the binding navigator. I also put a button on the form and had it refill the
    data to see and when I click it, the data on the binding navigator reflects the changes I made.. HOWEVER, as soon as I end the program, hit stop on the build and then re-play it, go into the the form the data is back to where it was from the start, and nothing
    is changed. So it seems like it is showing the changes during run-time, but never actually updating the root database file, and when it's shut down it loses all the changes that it shows (not that it matters, because it's not even updating the database).
    The database and its table have no special settings, just a plain old database created through the wizard, and one column of simple data of about 5 rows or so.
    Can anyone help at all? If I can't save changes to the database, then it's over.
    BTW i'm using Visual Studio 2013.

    Thanks both for your replies. I really appreciate your help. I'm not sure what you mean by keeping SQL studio manager open, make change in the physical database then refresh in server manager...I messed around and tried to figure that out, but I don't think
    I was even in the right place (SQL server object explorer?)...
    The tool I use to see if the database is updated, is by viewing the data in the SERVER EXPLORER. I hit refresh first then right click the table and choose show data.
    I ran this code on a button press:
    Dim sqlConnection1 As New System.Data.SqlClient.SqlConnection("Data Source=(LocalDB)\v11.0;AttachDbFilename=C:\Users\STyler\Desktop\vs10\Database1.mdf;Integrated Security=True")
    Dim cmd As New System.Data.SqlClient.SqlCommand
    cmd.CommandType = System.Data.CommandType.Text
    cmd.CommandText = "UPDATE Table2 SET [Depth] = @Depth WHERE [ID] = 2"
    cmd.Parameters.AddWithValue("@Depth", "gfakjld")
    cmd.Connection = sqlConnection1
    sqlConnection1.Open()
    cmd.ExecuteNonQuery()
    sqlConnection1.Close()
    ...and the change was made in the database. It's just not updating through the binding navigator.
    Can you further explain how I would go about using your suggestion about:
    If the database is SQL-Server then keep SQL Studio Manager open, make a change in the physical (thinking not on the server) database then refresh in SQL-Server Manager?
    Thanks both...

  • Ready to give up

    I am truly ready to give up on Photoshop Elements. I just purchased version 10 and had problems from the beginning. I asked several questions about why all my photos will not appear in my folders in Folder View in Organizer. I have followed all instructions I could find, but Organizer just spins and spins and takes forever to show anything, And then it only shows partial contents out of order or now, nothing in any folder at all. If I tell it to import again, it tells me the photos are already in the catalog.  I have uninstalled PSE completely, removing ALL folders which were missed in the uninstall. I have done this twice. Also, I told it I did not want to back up/sync online and discovered it had already backed up 1.6g. I could not find how to access this online backup to clear it. So, before I jump up and down on the disks, any help or link to real-time help would be appreciated. Thanks for listening to me vent, but after 5 days of struggling I am desperate!

    The folder location view shows all the images of the folder selected in tree hierarchy. So if you want to see all the images present in catalog you need to switch to thumbnail view or import batch view. You can access your online backup by signing to photoshop.com with credentials. On Photoshop.com, under libraries you will find all your backed up data.

  • How can I get someone to answer the phone? I'm ready to give VERIZON my business. I sat on the phone for over 20 minutes only to be transferred to "Sales." I then sat on the phone for another 15 minutes!!!! I finally hung up.

    How can I get someone to answer the phone? I'm ready to give VERIZON my business. I sat on the phone for over 20 minutes only to be transferred to "Sales." I then sat on the phone for another 15 minutes!!!! I finally hung up.

    It takes an enormous amount of patience and time to get through to a qualified person.
    My Samsung S5 was locked out and needed a factory reset. Including attempts to achieve this locally, it took over an hour before my problem was even addressed.
    You may be interested in my journey to a very good technical support person.
    First I called the local sales person who had given me his personal business card with the friendly advice to call me with any questions. No answer at about 8:30 am when the business was open. His voice mailbox was full.
    Then I called the local store where I had purchased the phone. The person who answered the phone had learned all the proper stock phrases, but was not familiar with the issue, stated that there were no customers in the store, and I should go there in about an hour when there would be more staff. He suggested dialing *411 from my phone (which was locked). Then he gave me a number to call Verizon, which he had to look up, and it took a minute or so. The number was (removed). That is an internal number for employees and contractors and requires a code to access, obviously not designed for customers' use. He finally cut me off by stating that there were a number of customers in line waiting for his attention!
    After researching all my papers I found 800-922-0204 on my bill. The automated message suggested a hold time of 5 minutes, it took 20 minutes for a Customer Service Representative to pick up, and then I was referred to technical assistance. The hold time was announced to take 5 minutes, after 12 minutes I finally was connected.
    Fortunately I had my computer set up for Skype on a loudspeaker, and was able to do some other paperwork while waiting.
    Persistence was rewarded by having the good fortune to be connected to a very experienced, qualified and patient technical support staff with the name of Thomas (removed). He solved my problem, answered my questions during the process of resetting the phone, and gave an example of courteous and kind customer service that I had never experienced before when dealing with any major internet company.
    >> Edited to comply with the Verizon Wireless Terms of Service <<
    Edited by:  Verizon Moderator

  • RoboHelp 9 Will Not Compile Web Help

    Windows 7 Professional 640-bit
    Microsoft Office 2010
    RH 9.0.2.271
    I have several projects for which I compile Web help.
    Compiling the projects has been no problem in the past.
    I have made no known changes to the computer or user rights.
    Now, RH stops responding when the compile starts. The stop is very early in the process.
    I can compile CHM files.
    In Output View, I see the following message:
    Initializing complier
    Generating Webhelp 5.50 (9.0.0.228)…
    Error: Can not register active script for language javascript
    Template Error: can not resolve macro: RegisterResolvers
    Fata Error: Cannot run macro: Register Resolvers in compilation.
    While searching for an answer, I tried the following without success:
    Note: I am an administrator on the computer. I have always been an admin on the computer.
    I have not uninstalled/reinstalled RH so there should be no issues with administrator privileges.
    I ran the RH executable as an administrator using a variety of methods like right-click RoboHTML.exe and click Run as Administrator.
    Project is on local drive.
    Created a new project.
    Compiled the sample projects contained in RH.
    Created a new SSL.
    Create a new target folder for the output.
    Copy the LNG file from the "!Language\<current-project-language>" folder to the project folder.
    From the project settings dialog, change the project language to a different language, and then change it back to the current language.
    Deleted CPD file.
    Deleted !Language! folder.
    Word macro security is Enable all macros.
    Can anyone help me find something I have not tried.

    First I have often found that Deactivate becomes enabled if you wait a while after opening.
    Search on these two lines from your first post.
    Template Error: can not resolve macro: RegisterResolvers
    Fata Error: Cannot run macro: Register Resolvers in compilation.
    (Was it really Fata rather then Fatal?)
    Maybe you haven't changed rights but have IT done so without your knowledge?
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Robohelp 9 crashing when generating Web Help

    Hi there, I have RH V 9.0.1.232 installed. I have a project with about 1000 files which was converted from RH 8 without issue until now.
    There are 3 Conditional Build Tags. I can publish the project to Web Help with layouts including tags #1 and #2, but when I include #3 in any layout, RH crashes at the same point every time, as shown below:
    I have tried leaving it for over an hour without change. When I open Task Manager, RH is listed as "Not Responding." I do not get an error message at all. I have not generated this layout in several months, and possibly not since I have had RH 9.
    Tag #3 must be applied to hide content from a public audience. This tag is applied to several sections in every topic, and is also applied at the topic level for about 20% of the topics.
    Here is what I've tried to do:
    1. Create a test project with multiple tags and publish to WebHelp - no issue found.
    2. Rolled the project folder back to an earlier version from yesterday morning - problem still exists, could try an earlier version but a lot of work was done yesterday.
    3. Followed the instructions here, which have served me well in the past - problem still exists- http://www.techfuels.com/software-jargons/29202-repairing-corrupted-robohelp-project.html
    All of this leads me to think there is something wrong with the tag in particular. I could delete the tag, create a new one and reapply it, but that would be a major challenge considering the number of topics I'm dealing with, and I am the lone writer.
    Anyway, if anyone has any ideas or has had problems like this in the past, I would appreciate your time.
    Thanks,
    Michelle

    Michelle I think that whilst thanks are always welcome, in this case you should thank yourself. All I did you get you to question what had changed. You did all the hard graft. Glad you got it sorted.
      The RoboColum(n)
      @robocolumn
      Colum McAndrew

  • Unable to open Information Map from planning web Help menu

    Unable to open Information Map from planning web Help menu
    The error is :
    Error 404--Not Found
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.4.5 404 Not Found
    The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
    If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

    Hi,
    It should be accessing :- http://<planning server>:8300/HyperionPlanning/help/en/hp_information_map/hp_information_map.html
    Can you access that address on the machine hosting planning?
    The file structure on the web server depending on which app server you use should be something like \Hyperion\deployments\Tomcat5\HyperionPlanning\webapps\HyperionPlanning\help\en\hp_information_map\hp_information_map.html
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Images in my FrameMaker 10-sourced Robohelp Web Help project are turning out as blank JPEGS appearing as blank spaces in the final output. How can I fix this?

    I'm attempting to create online help sourced from a FrameMaker 10 book using Robohelp 9 and Web Help (primary layout).
    The text is interspersed with numeorus small icons which, in the FrameMaker documents, are .bmp images inserted into anchored frames in the lines of text.
    Most of these icons were imported by reference into the FrameMaker book's chapters. Some were copied from another FrameMaker book and pasted into the present book.
    Many of these images are turning out blank in the finished Help project.
    Robohelp seems to convert these images into JPEGS.
    In the source FrameMaker book, the images which appear OK in the Help project have Object Properties including: Facets: FrameVector   JPEG ... Referenced File: No File
    The images which appear blank have different object properties there: Facets: DIB ... Referenced File: (address of the image's source file)
    How can I fix this and make all of the images appear in the Online Help?

    Sorry, Jeff. I missed the key word in your instructions. Well, I did the import and still no luck. I'm getting the exact same results with the same images. (In some cases, I'm even getting hidden conditional text from the FM document body showing up in the image's frame instead of the image! See below.) This is bizarre behavior, but it's not new with the import. It is happening both in the linked and imported WebHelp with the same exact images. (Just another piece to complicate the puzzle.) So we have some jpeg images that are blank, and a few that are glitchy. From what I can tell, the commonality, besides the fact that all these new images are in jpeg format instead of gif format, is that all the blank and glitchy images are in a text inset. I'm beginning to think maybe RH just doesn't support text insets at all.
    Arnis, I'll have to ask my colleague how she created the images next week when she's back from vacation. I have no clue if there are any differences between the jpegs and why some are showing up correctly. What do you mean by "compression type or level?" Are you asking about the resolution (high, medium, low) she chose when saving the images, or which program she used to do the screen capture and editing? (We have Adobe Photoshop CS5 and FM 11).
    My next step is to copy-paste all the content from the text insets into my FM document (in the book I am linking) and re-render to see if that solves the problem. It will make single-sourcing impossible because I'll have to copy-paste the new content and images my colleague creates into my document each time we do an update, but oh well.
    Here is an example of a glitchy image in RH:
    And here is what it looks like in FM:
    So bizarre!

  • Photoshop web help is illegible

    Adobe seem to have no interest in people with poor eyesight. Photoshop 6 has arrived with the same tiny icons are CS5. Worse, the web help is completely illegible, even with a magnifying glass. It is presented as gray on gray, with a font that is somehow blurred and which will not zoom.
    This page will, however, zoom; but my browser spell check is suppressed. Elsewhere on this site, the font size is or is not fixed, and varies wildly from what looks like six point gray up to the title bar on this form, which is about 30 point, and so far too big for its intended purpose.
    Has anyone found how to over-ride this, as it renders Help utterly useless?

    Haven't you heard?  Thin and small are in.  Fashion doesn't need to be practical.  Or so they think.
    Not only are the often tiny fonts presented in poor size and color choices, but the faces differ from place to place as well on the same page.  And their own AdobeCleanRegular font is so poorly designed that words in italics sometimes appear to run into the words that follow.  Add to that the fact that AdobeCleanLight doesn't visually work with AdobeCleanRegular at all!  Who "designed" this stuff?
    I'm specifically choosing Verdana 12 point for the rest of this message - assuming this brain damaged editor does what I tell it.
    Adobe clearly has lost most of the talent from their web development programming staff. 
    This appears to reflect a failure by management to realize that the visible public face of their company on the web says a lot about them.  Individual problems can be overlooked, but such obvious problems that run across an entire company must be funding-related and/or cultural.
    What's astonishing is that Adobe proposes to be the expert supplier of software to people who are creating web content, while simultaneously appearing utterly incompetent in doing so themselves.
    People may think I'm being harsh; insulting even.  These problems have been going on for years!  The time is long past for politeness, and the good guys know who they are and know I don't mean to insult them.
    -Noel

  • RH8 web help not displaying in IE9

    Hi all,
    We've just encountered a problem where a customer could not open web help created from RH8 in the IE9 browser.
    To quote the reportee...
    "IE reports 'the address is not valid'.
    But, this only happens when calling the help files using the server name, if you call the files using localhost or using the IP address rather then the computer name, then they work. And if you edit the file in Word you get the error 'DTD is prohibited'."
    Anyone have any thoughts?
    BTW I currently have to run IE8 as I am still on xp and RH8
    Regards
    Steve

    Thanks, but I don't have that folder, nor the one listed here for 2014: Re: Source Sans Pro not displaying in 'Design' mode

  • IPhoto 9.4 sliders for shadows: and highlights: only give black page. can anyone help?

    iPhoto 9.4 sliders for shadows: and highlights: only give black page. can anyone help?

    While we all have MacBooks in this forum not all of us use iPhoto. There's an iPhoto Support Community where everybody uses iPhoto. You should also post this question there to increase your chances of getting an answer.   https://discussions.apple.com/community/ilife/iphoto

  • RH 7 WEB Help: Hyperlink to external file will not activate file

    I have added an external file (Excel spreadsheet document) to my RH 7 WEB Help.
    * The Excel file is located in the Project Manager
    * The hyperlink contains the correct file name
    * The generated WEB Help folder contains the Excel file
    However, when I test the external file link, the external (Excel) file does not open.
    Suggestions?
    Thanks,
    Jerry Christensen
    St. Paul, Minnesota

    Hi there
    LIkely Mark Of The Web (MOTW) is nailing you. When you test locally and have MOTW enabled, links to things like Excel, Word and PDF don't work.
    The first step is to turn off MOTW. You do that by right-clicking the WebHelp layout and choosing Properties. The option for MOTW is in the first dialog.
    Once that is done things should be mostly good. I say "mostly", as you will now probably see the yellow information bar in IE when you test. To prevent seeing that, you need to change the settings in IE.
    To change the settings in IE:
    Click Start > Run type inetcpl.cpl and press Enter
    Click the Advanced tab
    Scroll to the Security section
    Place a check mark in the option "Allow active content to run in files on My Computer"
    Cheers... Rick
    Begin learning RoboHelp HTML 7 within the day - $24.95!
    Click here for Adobe Authorized Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • HT1766 my iphone version is 7.0 and it has been expired im trying to downgrade it but itunes gives me errors can anybody help ?

    my iphone version is 7.0 and it has been expired im trying to downgrade it but itunes gives me errors can anybody help ?

    You should be posting this in the Developer Forums, to which, as a developer, you have access. Discussion of beta software isn't permitted in the public forums due to the NDAs you sign as a developer.
    Best of luck.

Maybe you are looking for