Reason for Rejection and Rejection Status
Hi,
Can any one please tell me when and in what scenario following fields being populated
: Reason for Rejection - ABGRU
Rejection Stauts - VBAG-ABSTA
Thanks
Hi,
Suppose an order has been created of 100MTS and been Dispatched & Billed only 90 MTS.Now rest of 10 MTS ,you dont want to dispatch.Then in that case , Marketing person will mention the Reason of Rejection like Order Shortclosed.Now if you will see the Status of order in Document Flow , it will be closed.
So if it is MTO Scenario, then just De-Assign the Stock from the Sales Order and assign it to the newly created one.
Best Regards,
Ankur
Similar Messages
-
I am not using condition for Approval and Rejection.
Hi Balaji,
I am not using condition for Approval and Rejection.
I am using Decision.
I am not able to find the error.Rejection is going on Successfully.
I am to rectify this error from past 4 days.
Can you give the solution.
Regards,
Chow.Hi chow,
What is the condition that u are using the Condition Statement.
Please check the status returned from the Approval Process, by analyzing the Workflow Log for the particular step.
Think there is a problem with the condition statement.
Regards,
Raj -
Different stock value for accepted and rejected material in quality
Hi,
when we send the final product in quality ,some material has accepted and some material has rejected
But system is showing the value of both accepted and rejected same.
But we want that the value for both should be different.
How we can get it
Regards
PremIt is not possible to valuate differently for accepted and rejected material.
The value for material in PO for total material. So it should be same value for both.
Regards
Ravi -
For reasons unknown to me, my brand new ipod touch keeps activating Voice Control. I am not pressing the home button or touching any controls. I can be doing nothing with it and it just kicks on, sometimes interrupting what is already going on (like listening to an audio book in the Audible app. Is there a reason for this and how do I stop it?
Press the Home Button 3 Times... then goto > Settings > General > Accessibility > Voice Over > Off
Next... Try this...
Close All Open Apps and Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
Email alerts for CPU and Memory status of CUCM
Hi All,
can anybody help me here?
Will RTMT trigger the daily email notification for CPU and Memory status of CUCM? If yes, kindly let me know the procedure.
Thanks in advance !!!!Hi Hariharan,
In addition to Atul's link please refer the below mentioned link CPU and Memory usage
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/managed_services/cucm_health.html#wp1101115
Tx,
Hope this helps
Shalu -
The artwork for our podcast, "Japan Baseball Weekly," recently disappeared. The RSS feed info appears to be in order, any particular reason for this and what can be done to rectify the situation?
Please always post the URLs of the Store page and the feed when you have a question. For reference, your feed is at
http://www.japanesebaseball.com/services/jbw-podcasts.jsp
and the Store page is at
http://itunes.apple.com/gb/podcast/japan-baseball-weekly/id443149184
Looking at the Store page, the image appears there perfectly well. On subscribing there is no image associated with the episodes because you haven't embedded an image in the files - please see this page for clarification:
http://homepage.mac.com/rfwilmut/notes/coverart.html -
While searching with safari when I am typing in what I am searching for all of my old emails pop in that are related to the subject. Is there a reason for this and or way to rid the search of this?
Sometimes you want to just to search something that specific. Like if I am searching "ebay" I want the address and site for ebay to appear not everyone of my previous emails reguarding Ebay or searches in regards to ebay and this is all that pops up.
-
Firefox seems unable to load the halifax online banking website where as iexplore is able to do this is there and reason for this and can i do nething to make firefox do it?
Firefox seems unable to load the halifax online banking website where as iexplore is able to do this is there and reason for this and can i do nething to make firefox do it?
-
Mail Keeps Asking For Password And Rejecting It?
I have just been phoned by a friend with an early G5 iMac running OSX 10.3.9.
He's been having slight problems with Mail for a while but now it has refused to send emails.
Whenever he tries he gets a window requesting the password for the account but each time it says that the POP server has rejected it.
He is adamant that he is using the correct password.
I have had this happen occasionally but can't remember how I resolved it . . . . I even suspect it may have cured itself a day or so later.
So has anyone got any helpful ideas or suggestions?Unfortunately when he ran Keychain First Aid it showed there were no problems.
When I finished phoning him Mail was still requesting and rejecting passwords.
I have a feeling that whenever it has happened to me I have given up in despair only to find that a day or so later things are back to normal, which would suggest a temporary problem at the ISP's end. -
I sent my iphone in for repair and the status was canceled repair request.
I sent my iphone 3GS in for repair and when I checked on the status of the repair, it said repair request canceled. Does this mean it has been fixed and on its way back or they are sending a new one back? I am confused.
Ah ,so you are in Europe ( helps to tell upfront as this is a WW forum )
They will not repair your iPhone they will check it and assuming no user induced damage will send back a replacement refurbished unit to you ( reason for no accessories )
There must be a contact number where you arranged the return
It is possibly going to Eire where Apple seems to ship most EU shipments from -
Mac mail password rejected and rejected and rejected and rejected and rejec
os 10.3.9
Mail 1.3.11
SBCglobal Internet access
I have spent many a wasted hours chatting with a very polite person in India (SBC tech support) about my mail problem only to be assured - more than once - that all my settings are correct and it’s a mac problem.
So here it is:
My incoming mail server is: pop.sbcglobal.yahoo.com
I have my account password stored my mail program/keychain and sometimes mail manages to automatically access and download my email - just like you'd think it would. BUT then all of a sudden it doesn’t, and I get the error from mail:
The POP server “pop.sbcglobal.yahoo.com” rejected the password for user “[email protected]”
Please re-enter your password, or cancel.
I re-enter - or cancel and wait for the next scheduled auto-check and it happens again and again. Occasionally though it works. If I hit the 'Get Mail' button twice in a row its pretty likely to reject the password at least once.
Any ideas why this should be - or how I could stop it?
Thanks in advance
Powerbook G4 800 DVI Mac OS X (10.3.9) 512RAM Airport Card Firmware: 9.52This issue may have more to do with your mail server rather than your Mac.
I too was afflicted with issue for over a week. I tried many fixes including, keychain repair, deleting my mail prefs and rebuilding my accounts by hand, toggling the interval button, shutting down and unplugging everything including AC power to my Mac. (btw -cancelling the message seemed to make it come back faster)
It was happening about half dozen times a day. Then one day it happened only 3 times, the next day twice, the next day once. Then gone! Fingers X'd it's 3 full weeks now without seeing it.
There is hope!
EDIT: As Max Miles says multiple computers can cause this. All are valid suggestions and may work in your cases.
-mj
[email protected] -
Info for command and busy status
Can anyone provide me with info on the busy status property returned by the info for command?
Under OS 9, I used that to determine if files were busy before attempting to process them.
Now, under OS X, it doesn't seem to be functional, the files are processed even if they really are busy, and the fider throws a message back at me saying so.
Basic scenario (repeated with any PostScript files found in folder):
set busyStatus to busy status of (info for epsFile as alias)
if busyStatus is false then
try
<distill file>
on error
return 10
end try
end if
if exists epsFile then
set busyStatus to busy status of (info for epsFile as alias)
if busyStatus is false then
try
delete epsFile
on error
return 10
end try
end if
end if
The folder being watched is a folder that graphic artists are writing PS files to directly from InDesign.
If the script runs and a PS file is in the process of being written, it still attempts to distill it, and it still attempts to delete it, and the result is a finder error.
I had assumed that the busy status would solve my problem, but it doesn't ever appear to return a true value.
I had also assumed that the try-on error block would catch the finder error and prevent it from displaying the dialog box, but it doesn't appear to.
I have found a few references to the fact that busy status isn't reliable, and may not work at all under OS X. Anyone have any ideas?We used to use the watched folder feature of Acrobat. We just upgraded our process from OS 9/Acrobat 4 to OS X/Acrobat 7. What Adobe fails to tell you, is that the Standard version of Acrobat doesn't have watched folders. That is now only a feature of the Pro version.
I thought I could avoid paying $150 a copy to upgrade from Standard to Pro, just for that one feature.
I have previously used Applescript to create watched folders for a variety of automation tasks, and never had a problem. Because I have a lot of Applescript processes in place already that rely on being able to determine if a file is busy, I need to figure out how to do it with OS X. -
Change in status network For superseded and obsolete Status
Hi All
Users are incorrectly changing the status of Controlled Documents from Superseded (SU) and Obsolete (OB)…….. to Cancelled (CA).
SAP DMS Process should not allow Controlled Documents that are status Superseded (SU) or Obsolete (OB) to be changed to status Cancelled (CA).
According to me Cancelled status can be attend at any stage. there is no Configuration like excluding Cancelled status from any 1 of the status.
kindly suggest on this Issue as how we can Approach on this
Thanks in advanceHi Shankar,
I guess you can do this from SPRO.
project systems>>Structures>>Operative Structures>>Work breakdown Structures
Check if you can do this in WBS User status and Create project profile.
Regards,
Gautham Paspala -
Power shell script failed to run - reasons for it and some background?
Hi there
I have been receiving some alerts with high repeat count that Powershell script failed to run.
All of them are coming from one server and all of them are related to SQL2012 installation. The following scripts generate alerts:
CPUUsagePercentDataSource.ps1
StolenServerMemory2012.ps1
DBDiskLatencyDataSource.ps1
I am quite new to SCOM and still trying to find my way around conveniently - I would appreciate your help if you could explain me one thing: are these scripts executed locally or through remote PSSession to the target? The point is I couldn't find any of
these scripts on my server to re-run them (and possibly catch exceptions).
The repeat count for past two months is quite high, for 8 alerts between 25 / 80.
Thanks in advance!
AlexPThe agent downloads the script and it is run locally on the agent machine, in your case the SQL Server. Usually most of these type scripts are held in the Agent folder under scritp/downloads, (sorry dont have the full path in front of me or I would give
it to you).
These errors are probably due to the fact that SQL 2012 does not give any rights to the Local System Account which is the context in which the SCOM agent runs scripts as, and is unable to access SQL information due to this fact. The easiest way to fix this
is to setup a run as account, which would be an account on your domain that has local admin access to the SQL box and has SA rights to the instance of SqL running on that box. See the following blog posts on how to fix this.
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
Hope this helps! this will probably create more questions...
Scott Moss MVP (Operations Manager) President - System Center Virtual Users Group |Vice President - Atlanta Southeast Management Users Group (ATL SMUG)
Please remember to click “Mark as Answer” on the post that helps you!
my new blog om2012.wordpress.com -
When i try to search for specific sites whether to find something or group together a list of sites from the same site, etc, after i type in a term in the Search History box, nothing appears. When i click the empty area it says "no item selected" at the bottom. However i can still search my bookmarks. Just wondering if there's a way to fix this.
It seems to have worked itself out. Thanks anyway!
Maybe you are looking for
-
I spent 10 hours, talking with 2 customer service reps, 1 customer service supervisor, 2 sales persons, and 1 person from fraud. Here's the timeline: 1) On 9/12/14 at 3:30AM PST I pre-ordered a 64GB iPhone 6 White on the verizon website porting my nu
-
Error 523 please help for that
im facing this problm ..phn restart continuously and app error 523 is display..plz for tht
-
How to install the jms bundle with netbeans IDE
hello friends, i am feeling a lots of problem since i am having the package of jms but don't know how to install it with NetBeans 3.6 IDE. i am unable to mount it on the j2sdk1.4_02 . please tell me how to install it, so that i can use this using net
-
DBMS_JOB not exported by DATAPUMP?
Hi We are setting up expdp, and we cannot get DBMS_JOBS to be exported. And so far we have not found any documentation of wether DBMS_JOBS are supposed to be exported or not. And I know DBMS_JOB are going to be deprecated, and DBMS_SCHEDULE is beeing
-
I forgot my passcode and tried restoring my ipod touch, but it's not working. What should I do?