Reassigning volumes to 2012 from 2008

I am putting up some 2012 File Servers. I am going to move the volumes from the 2008 file servers to 2012 (reassign them at the SAN).
I looked up NTFS volume changes between 2008 and 2012 and didnt see anything that would cause an issue, but I want to make sure.
Is anyone aware of any file system problems that will arrise from attaching a 2008 volume to 2012.

is it just standard LUN presented to the current server, if so i don't see an issue with though, just make sure you have a valid backup first.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

Similar Messages

NPS Authentication Fails (Reason 16) After Migration to 2012 R2 from 2008 R2

I'm using NPS for wired dot1x authentication and I just migrated my NPS server from 2008 R2 to 2012 R2. When I point the network switch to start using the new 2012 R2 NPS as the RADIUS server, I get authentication failures - event 6273, reason code
16. When I switch it back to the 2008 R2 server, it works fine. The two servers are configured EXACTLY the same as far as I can tell - same RADIUS client config, same connection request policies, same network policies - and it should be since I
used the MS prescribed migration process. The only thing that differs is the server's certificate name used in the PEAP setup screen.
I'm using computer authentication only, so everything is based on computer accounts and I've selected to NOT validate server credentials on the group policy.
I've verified the shared secrets multiple times. Both servers are domain controllers.
Here is an example of the errors logged on the 2012 R2 server.
========================================
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
   Security ID:           FAITHCHURCH\youthroom$
   Account Name:           host/YOUTHROOM.faithchurch.net
   Account Domain:           FAITHCHURCH
   Fully Qualified Account Name:   FAITHCHURCH\youthroom$
Client Machine:
   Security ID:           NULL SID
   Account Name:           -
   Fully Qualified Account Name:   -
   OS-Version:           -
   Called Station Identifier:       -
   Calling Station Identifier:       44-37-E6-C0-32-CA
NAS:
   NAS IPv4 Address:       192.168.1.1
   NAS IPv6 Address:       -
   NAS Identifier:           -
   NAS Port-Type:           Ethernet
   NAS Port:           1010
RADIUS Client:
   Client Friendly Name:       Extreme X440
   Client IP Address:           192.168.1.1
Authentication Details:
   Connection Request Policy Name:   Secure Wired (Ethernet) Connections 2
   Network Policy Name:       Secure Wired (Ethernet) Connections 2
   Authentication Provider:       Windows
   Authentication Server:       Sigma.faithchurch.net
   Authentication Type:       PEAP
   EAP Type:           -
   Account Session Identifier:       -
   Logging Results:           Accounting information was written to the local log file.
   Reason Code:           16
   Reason:               Authentication failed due to a user credentials mismatch. Either the user name provided does not map to an existing user account or the password was incorrect.
========================================

Hi,
Have you added the NPS server to the RAS and IAS Servers
security group in AD DS?
The NPS server needs permission to read the dial-in properties of user accounts during the authorization process.
Try to add a loal user on the NPS server, then test with the local user. If it works, it means that there is something wrong between NPS and DC.
If the issue persists, it means that the configuration between NPS and NAS is wrong.
Steven Lee
TechNet Community Support

Migrating a website from 2008 R2 to 2012 ( iis 8.5)

Hi Need help with the following scenario.
I need to move the entire website from 2008 R2 to new 2012 server, please find the details below.
Web site number : 1
Current Server 2008 R2 ( iis 7.5)
Destination : 2012 ( iis 8.5 )
Is there any migration tool available for the same ?

Hi Joshy,
I agree with Tim. You should post the question in IIS forum. I believe we will get a better assistance there. There is the URL of IIS forum:
http://forums.iis.net/
I also find two simialr threads from IIS forum. It seems that you can use
IIS Easy MIgration Tool to migrate. Please refer to and check if can help you.
IIS 7.5 to 8.5
How to upgrade from IIS 7.5 (Server 2008R2) to IIS 8.5 (server 2012r2)
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Possible route from 2008 r2 to 2012 r2 Essential on different machines?

I have a Windows server 2008 r2 standard on a machine and we bought a new server.
I want to transfer all my users, groups, machines from the 2008 r2 machine to the new 2012 r2 Essential machine.
I've read the Migrate from Previous Versions to Windows Server 2012 R2 Essentials and
Migrate Windows Server 2012 Essentials to New Hardware article but I'm still not sure this can be working with the 2008 r2 standard too.
If it doesn't work, restore a system state backup on 2012 r2 from 2008 r2 is possible? Or Is there a method to transfer my users and computers?
Is it possible that after I demote the original server, I rename the new server to the name of the old server?
I have an SQL server instance in the source server. This and the user profiles are the only things I want to transfer.
Thank you!
Tamas

It is not as simple as that with an Essentials server as it also runs a certificate authority, and the Essentials features are heavily tied into that.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

I did an Unsupported InPlace OS Upgrade from 2008-R2 to 2012-R2

Well, I misunderstood what was supported and upgraded the OS on a SCCM 2012-R2 server from 2008-R2 to 2012-R2. (The one and only SCCM-server in the site)
All seems to work well, my concern now is what can I expect of future problems? Should I do the backup-install-restore procedure now to be sure or let it run until... "maybe something" happens?
Thanks.

"not supported" just means that MS did not test that scenario (and it does not automatically mean that it does not work).
I've done such an OS upgrade in my lab and were running into some smaller issues (MP/DP/SUP = the roles that require IIS) and were able to fix them by removing and re-adding those roles but YMMV.
The supported way would be: recover from backup. But you can also have a close look at all roles and see if they are still working.
Torsten Meringer | http://www.mssccmfaq.de

Migrating the CA from 2008 to 2012 PKI ?

Hi All,
I am using the HSM in my PKI environment and i performing the migration of CA from 2008 PKI to 2012 PKI. What i noticed is if the private key of CA is protected by OCS card then i don't see the CA certificate while running the Microsoft wizard at the
option of choose the existing certficate and private key but if i change the protection of private key to module or default protection then i am able to see the certificate and able to complete the migration.
So is there a way i can still do the migration of CA without changing the protection of private key from OCS to module or default protection ??
Puneet Singh

Hi Brian ,
I tried your solution but its not working please find the details below. Can you please let me know if i have missed anything while trying it .
Note : OCS card are PIN protected .
1) install the nCipher software. (Successfull)
2) Copy the %nfast_kmdata%\local folder and %nfast_kmdata%\config folders to the 2012 R2 server ( Sucessfull verified by
running enquiry and nfkminfo)
3) Import the CA certificate into the MY store (certutil -addstore my CA.crt) ( Successfull )
4) Re-attach the key (certutil -repairstore MY serialnumber)
( Sucessfull as i got the below output
C:\Program Files (x86)\nCipher\nfast\bin>certutil -repairstore MY "1d 37 f3 31 d
2 06 b5 9c 43 3a 59 d3 d8 a2 96 90"
MY "Personal"
================ Certificate 0 ================
Serial Number: 1d37f331d206b59c433a59d3d8a29690
Issuer: CN=ROOT-CA-SRC-CA
NotBefore: 2/7/2015 12:23 PM
NotAfter: 2/7/2020 12:29 PM
Subject: CN=ROOT-CA-SRC-CA
CA Version: V0.0
Signature matches Public Key
Root Certificate: Subject matches Issuer
Cert Hash(sha1): 5a b6 38 e9 fd bb e4 1c c8 a2 a0 94 b7 ba 45 c0 44 3a 5b 9a
Key Container = ROOT-CA-SRC-CA
Provider = nCipher Security World Key Storage Provider
Private key is NOT exportable
Signature test passed
CertUtil: -repairstore command completed successfully.
5)
Run the installation wizard using the existing key pair (will now be visible) ( Failed : I started the wizard and i didn't see the cert
Please
find the screen shot below
Puneet Singh

Why can I open a saved htm page from 2008 to 2012 but not 2013?

I have saved an htm and or html page for 4 days a week since 2008 to 2012. those pages have had no issues opening as the saved page. but ever since approximately 2013 those saved pages will not open as saved. I have asked at the site that the page is coming from if it had changed anything, they said no. my system is the same as it has been for many years(10), windows XP service pack 3. as for other saved files there are no issues, I would be happy to send as an attachment a page from 2008 and any of the saved pages from 2013.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information such as bookmarks and history.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences, you may also want to backup those htm/html just in case if something goes wrong.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Certificate errors after upgrade from 2008 r2 to 2012 r2

After upgrading a DC from 2008 R2 to 2012 R2, Outlook will no longer connect to outlook.office365.com. This appears to be a direct result of the upgrade, worked before and failed after.
I get a flurry of message boxes when I launch Outlook, and it will run but not connect. No path through the messages (granting permission to ignore the error, or installing the certificate) makes any difference. Not seeing anything in the event
logs, and have no idea how to fix this.
In addition, IE is now raising cert complaints on every site, doesn't matter which. Firefox seems to be managing okay, for the most part.
Thanks for any guidance.

Hi Michael,
I am so sorry for the delay.
I was trying to find more useful information about this issue, though there are very little information other than installing the trusted root certificate which is provided by the KB
article above.
I would suggest you download a
certificate chain and install it.
If this method still couldn’t help you solve this issue, since you are using third party certificate (VeriSign) for your organization, you can get more efficient support by contacting
third party support services.
More information for you:
Installing a Certificate Chain for Communicator Web Access
http://technet.microsoft.com/en-us/library/dd441378(v=office.13).aspx
Have a nice day!
Amy

I have a MBP from 2008 (before unibody) and when i try to use apps such as Mail and the Mac App Store, they crash when i click on the links (to purchase something). I found it only happened after i updated to 10.7.4. can some1 please tell me what i can do

Hi everyone, I have a macbook pro from 2008 which is the model before they became unibody. I have been having trouble using some of the built-in apps ever since i updated to 10.7.4. I cant use mail or the Mac App store becuase when i go to click on a link to purchase something in the Mac App Store of create a new email in Mail, the app just crashes. I am then asked to reopen the app and i try to do the same thing again and they same thing happens. Its really painful as i want to download applications and access my mail on my mac. Could you guys please get back to me on with somethings that i could try to get these apps working again.
Thanks

Hi Richard,
these are the things for when mail quits
here are the things that come from the console app
I also copied the words that came in the window when an app quits
Process:         Mail [2229]
Path:            /Applications/Mail.app/Contents/MacOS/Mail
Identifier:      com.apple.mail
Version:         5.2 (1278)
Build Info:      Mail-1278000000000000~1
Code Type:       X86-64 (Native)
Parent Process: launchd [109]
Date/Time:       2012-07-23 18:38:28.318 +0800
OS Version:      Mac OS X 10.7.4 (11E53)
Report Version: 9
Interval Since Last Report:          159173 sec
Crashes Since Last Report:           3
Per-App Interval Since Last Report: 61 sec
Per-App Crashes Since Last Report:   2
Anonymous UUID:                      903F8ACA-456A-4BFE-ACC9-1D5C31F6FF48
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x00007fff7b534568
VM Regions Near 0x7fff7b534568:
    __DATA                 00007fff7b4c1000-00007fff7b4c4000 [   12K] rw-/rwx SM=COW /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
--> __DATA                 00007fff7b4c4000-00007fff7b571000 [ 692K] rw-/rwx SM=COW /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    __DATA                 00007fff7b571000-00007fff7b57d000 [   48K] rw-/rwx SM=COW /System/Library/PrivateFrameworks/CoreAUC.framework/Versions/A/CoreAUC
Application Specific Information:
objc[2229]: garbage collection is OFF
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   ???                                     0x00007fff7b534568 OBJC_CLASS_$_NSProcessInfo + 0
1   com.apple.mail                          0x0000000104401fe2 0x104365000 + 643042
2   com.apple.mail                          0x0000000104401f1a 0x104365000 + 642842
3   com.apple.AppKit                        0x00007fff8b2682ce -[NSWindow sendEvent:] + 2088
4   com.apple.mail                          0x000000010442b9f9 0x104365000 + 813561
5   com.apple.AppKit                        0x00007fff8b202a55 -[NSApplication sendEvent:] + 5593
6   com.apple.mail                          0x00000001043e4d1b 0x104365000 + 523547
7   com.apple.AppKit                        0x00007fff8b1990c6 -[NSApplication run] + 555
8   com.apple.AppKit                        0x00007fff8b415244 NSApplicationMain + 867
9   com.apple.mail                          0x000000010443d52c 0x104365000 + 886060
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0   libsystem_kernel.dylib                  0x00007fff89dca7e6 kevent + 10
1   libdispatch.dylib                       0x00007fff924e278a _dispatch_mgr_invoke + 923
2   libdispatch.dylib                       0x00007fff924e131a _dispatch_mgr_thread + 54
Thread 2:: -[LibraryIMAPStore openSynchronously] Dispatch queue: com.apple.root.default-overcommit-priority
0   libsystem_kernel.dylib                  0x00007fff89dca7e6 kevent + 10
1   libsystem_info.dylib                    0x00007fff96c1cfe5 _mdns_search + 1537
2   libsystem_info.dylib                    0x00007fff96c1d8b7 mdns_addrinfo + 615
3   libsystem_info.dylib                    0x00007fff96c1e151 search_addrinfo + 152
4   libsystem_info.dylib                    0x00007fff96c21a1c si_addrinfo + 1614
5   libsystem_info.dylib                    0x00007fff96c19795 getaddrinfo + 166
6   com.apple.SystemConfiguration           0x00007fff90d9c061 __SCNetworkReachabilityGetFlags + 2037
7   com.apple.SystemConfiguration           0x00007fff90d9b841 SCNetworkReachabilityGetFlags + 163
8   com.apple.MessageFramework              0x00007fff925ae764 -[NetworkController isHostReachable:] + 141
9   com.apple.MessageFramework              0x00007fff925addc6 -[_NSSocket connectToHost:withPort:protocol:] + 188
10 com.apple.MessageFramework              0x00007fff925ad24d -[Connection _connectUsingHostname:onPort:securityLayerType:clientIdentity:accountClass:] + 747
11 com.apple.MessageFramework              0x00007fff925acdf6 -[Connection _connectUsingAccount:securityLayerType:] + 224
12 com.apple.MessageFramework              0x00007fff925aca52 -[Connection connectAndSetSecurityLayerUsingAccount:] + 181
13 com.apple.MessageFramework              0x00007fff925ac91d -[Connection connectUsingAccount:] + 80
14 com.apple.MessageFramework              0x00007fff925ac19d -[IMAPAccount _connectAndAuthenticate:] + 476
15 com.apple.MessageFramework              0x00007fff925aac42 -[IMAPAccount _recoverFromConnectionlessState] + 136
16 com.apple.MessageFramework              0x00007fff925aa8bd -[IMAPAccount _getPotentialGatewayForMailbox:options:createdNewConnection:needsSelect:] + 159
17 com.apple.MessageFramework              0x00007fff925aa612 -[IMAPAccount _gatewayForMailboxUid:name:options:] + 166
18 com.apple.MessageFramework              0x00007fff925aa4ec -[IMAPAccount gatewayForStore:options:] + 126
19 com.apple.MessageFramework              0x00007fff925aa32f -[LibraryIMAPStore _gatewayCreateIfNeeded:options:] + 131
20 com.apple.MessageFramework              0x00007fff925a50e5 -[LibraryIMAPStore openSynchronouslyUpdatingMetadata:withOptions:] + 283
21 com.apple.CoreFoundation                0x00007fff8a367efc __invoking___ + 140
22 com.apple.CoreFoundation                0x00007fff8a367d94 -[NSInvocation invoke] + 132
23 com.apple.MessageFramework              0x00007fff92590f68 -[MonitoredInvocation invoke] + 196
24 com.apple.MessageFramework              0x00007fff9256da79 -[ThrowingInvocationOperation main] + 33
25 com.apple.MessageFramework              0x00007fff9256da1f -[_MFInvocationOperation main] + 449
26 com.apple.Foundation                    0x00007fff9584a6b4 -[__NSOperationInternal start] + 705
27 com.apple.Foundation                    0x00007fff9585d912 ____NSOQSchedule_block_invoke_2 + 124
28 libdispatch.dylib                       0x00007fff924e0a86 _dispatch_call_block_and_release + 18
29 libdispatch.dylib                       0x00007fff924e1965 _dispatch_worker_thread2 + 255
30 libsystem_c.dylib                       0x00007fff89e243da _pthread_wqthread + 316
31 libsystem_c.dylib                       0x00007fff89e25b85 start_wqthread + 13
Thread 3:: -[LibraryIMAPStore openSynchronously] Dispatch queue: com.apple.root.default-overcommit-priority
0   libsystem_kernel.dylib                  0x00007fff89dca7e6 kevent + 10
1   libsystem_info.dylib                    0x00007fff96c1cfe5 _mdns_search + 1537
2   libsystem_info.dylib                    0x00007fff96c1d8b7 mdns_addrinfo + 615
3   libsystem_info.dylib                    0x00007fff96c1e151 search_addrinfo + 152
4   libsystem_info.dylib                    0x00007fff96c21a1c si_addrinfo + 1614
5   libsystem_info.dylib                    0x00007fff96c19795 getaddrinfo + 166
6   com.apple.SystemConfiguration           0x00007fff90d9c061 __SCNetworkReachabilityGetFlags + 2037
7   com.apple.SystemConfiguration           0x00007fff90d9b841 SCNetworkReachabilityGetFlags + 163
8   com.apple.MessageFramework              0x00007fff925ae764 -[NetworkController isHostReachable:] + 141
9   com.apple.MessageFramework              0x00007fff925addc6 -[_NSSocket connectToHost:withPort:protocol:] + 188
10 com.apple.MessageFramework              0x00007fff925ad24d -[Connection _connectUsingHostname:onPort:securityLayerType:clientIdentity:accountClass:] + 747
11 com.apple.MessageFramework              0x00007fff925acdf6 -[Connection _connectUsingAccount:securityLayerType:] + 224
12 com.apple.MessageFramework              0x00007fff925aca52 -[Connection connectAndSetSecurityLayerUsingAccount:] + 181
13 com.apple.MessageFramework              0x00007fff925ac91d -[Connection connectUsingAccount:] + 80
14 com.apple.MessageFramework              0x00007fff925ac19d -[IMAPAccount _connectAndAuthenticate:] + 476
15 com.apple.MessageFramework              0x00007fff925aac42 -[IMAPAccount _recoverFromConnectionlessState] + 136
16 com.apple.MessageFramework              0x00007fff925aa8bd -[IMAPAccount _getPotentialGatewayForMailbox:options:createdNewConnection:needsSelect:] + 159
17 com.apple.MessageFramework              0x00007fff925aa612 -[IMAPAccount _gatewayForMailboxUid:name:options:] + 166
18 com.apple.MessageFramework              0x00007fff925aa4ec -[IMAPAccount gatewayForStore:options:] + 126
19 com.apple.MessageFramework              0x00007fff925aa32f -[LibraryIMAPStore _gatewayCreateIfNeeded:options:] + 131
20 com.apple.MessageFramework              0x00007fff925a50e5 -[LibraryIMAPStore openSynchronouslyUpdatingMetadata:withOptions:] + 283
21 com.apple.CoreFoundation                0x00007fff8a367efc __invoking___ + 140
22 com.apple.CoreFoundation                0x00007fff8a367d94 -[NSInvocation invoke] + 132
23 com.apple.MessageFramework              0x00007fff92590f68 -[MonitoredInvocation invoke] + 196
24 com.apple.MessageFramework              0x00007fff9256da79 -[ThrowingInvocationOperation main] + 33
25 com.apple.MessageFramework              0x00007fff9256da1f -[_MFInvocationOperation main] + 449
26 com.apple.Foundation                    0x00007fff9584a6b4 -[__NSOperationInternal start] + 705
27 com.apple.Foundation                    0x00007fff9585d912 ____NSOQSchedule_block_invoke_2 + 124
28 libdispatch.dylib                       0x00007fff924e0a86 _dispatch_call_block_and_release + 18
29 libdispatch.dylib                       0x00007fff924e1965 _dispatch_worker_thread2 + 255
30 libsystem_c.dylib                       0x00007fff89e243da _pthread_wqthread + 316
31 libsystem_c.dylib                       0x00007fff89e25b85 start_wqthread + 13
Thread 4:
0   libsystem_kernel.dylib                  0x00007fff89dc9e42 __semwait_signal + 10
1   libsystem_c.dylib                       0x00007fff89dd8dea nanosleep + 164
2   libsystem_c.dylib                       0x00007fff89dd8bb5 usleep + 53
3   com.apple.AOSKit                        0x00007fff8f4ba0b8 -[AOSRequest sendSynchronously] + 56
4   com.apple.AOSKit                        0x00007fff8f4b3736 -[AOSThreadManager AOSKPersistMailAliases:] + 1173
5   com.apple.Foundation                    0x00007fff9585c72a -[NSThread main] + 68
6   com.apple.Foundation                    0x00007fff9585c6a2 __NSThread__main__ + 1575
7   libsystem_c.dylib                       0x00007fff89e228bf _pthread_start + 335
8   libsystem_c.dylib                       0x00007fff89e25b75 thread_start + 13
Thread 5:
0   libsystem_kernel.dylib                  0x00007fff89dc867a mach_msg_trap + 10
1   libsystem_kernel.dylib                  0x00007fff89dc7d71 mach_msg + 73
2   com.apple.CoreFoundation                0x00007fff8a30250c __CFRunLoopServiceMachPort + 188
3   com.apple.CoreFoundation                0x00007fff8a30ac74 __CFRunLoopRun + 1204
4   com.apple.CoreFoundation                0x00007fff8a30a486 CFRunLoopRunSpecific + 230
5   com.apple.CoreFoundation                0x00007fff8a31a19f CFRunLoopRun + 95
6   com.apple.AOSKit                        0x00007fff8f4ba031 -[AOSRequest _runRequestThread] + 306
7   com.apple.Foundation                    0x00007fff9585c72a -[NSThread main] + 68
8   com.apple.Foundation                    0x00007fff9585c6a2 __NSThread__main__ + 1575
9   libsystem_c.dylib                       0x00007fff89e228bf _pthread_start + 335
10 libsystem_c.dylib                       0x00007fff89e25b75 thread_start + 13
Thread 6:
0   libsystem_kernel.dylib                  0x00007fff89dc867a mach_msg_trap + 10
1   libsystem_kernel.dylib                  0x00007fff89dc7d71 mach_msg + 73
2   com.apple.CoreFoundation                0x00007fff8a30250c __CFRunLoopServiceMachPort + 188
3   com.apple.CoreFoundation                0x00007fff8a30ac74 __CFRunLoopRun + 1204
4   com.apple.CoreFoundation                0x00007fff8a30a486 CFRunLoopRunSpecific + 230
5   com.apple.Foundation                    0x00007fff9580df7b -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 267
6   com.apple.Foundation                    0x00007fff9580de67 -[NSRunLoop(NSRunLoop) run] + 62
7   com.apple.MessageFramework              0x00007fff9258e2dd -[RSSInterchange _runManager] + 1345
8   com.apple.Foundation                    0x00007fff9585c72a -[NSThread main] + 68
9   com.apple.Foundation                    0x00007fff9585c6a2 __NSThread__main__ + 1575
10 libsystem_c.dylib                       0x00007fff89e228bf _pthread_start + 335
11 libsystem_c.dylib                       0x00007fff89e25b75 thread_start + 13
Thread 7:
0   libsystem_kernel.dylib                  0x00007fff89dc867a mach_msg_trap + 10
1   libsystem_kernel.dylib                  0x00007fff89dc7d71 mach_msg + 73
2   com.apple.CoreFoundation                0x00007fff8a30250c __CFRunLoopServiceMachPort + 188
3   com.apple.CoreFoundation                0x00007fff8a30ac74 __CFRunLoopRun + 1204
4   com.apple.CoreFoundation                0x00007fff8a30a486 CFRunLoopRunSpecific + 230
5   com.apple.Foundation                    0x00007fff9580df7b -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 267
6   com.apple.Foundation                    0x00007fff9580de67 -[NSRunLoop(NSRunLoop) run] + 62
7   com.apple.MessageFramework              0x00007fff925adaa9 +[_NSSocket _runIOThread] + 80
8   com.apple.Foundation                    0x00007fff9585c72a -[NSThread main] + 68
9   com.apple.Foundation                    0x00007fff9585c6a2 __NSThread__main__ + 1575
10 libsystem_c.dylib                       0x00007fff89e228bf _pthread_start + 335
11 libsystem_c.dylib                       0x00007fff89e25b75 thread_start + 13
Thread 8:: -[IMAPAccount fetchSynchronouslyIsAuto:] Dispatch queue: com.apple.root.default-overcommit-priority
0   libsystem_kernel.dylib                  0x00007fff89dc9bf2 __psynch_mutexwait + 10
1   libsystem_c.dylib                       0x00007fff89e211a1 pthread_mutex_lock + 545
2   com.apple.Foundation                    0x00007fff9580c1ee -[NSLock lock] + 163
3   com.apple.MessageFramework              0x00007fff925aa5ec -[IMAPAccount _gatewayForMailboxUid:name:options:] + 128
4   com.apple.MessageFramework              0x00007fff925aa4ec -[IMAPAccount gatewayForStore:options:] + 126
5   com.apple.MessageFramework              0x00007fff925aa32f -[LibraryIMAPStore _gatewayCreateIfNeeded:options:] + 131
6   com.apple.MessageFramework              0x00007fff925a50e5 -[LibraryIMAPStore openSynchronouslyUpdatingMetadata:withOptions:] + 283
7   com.apple.MessageFramework              0x00007fff925f73be -[LibraryIMAPStore _fetchForCheckingNewMail:] + 51
8   com.apple.MessageFramework              0x00007fff925f6dfa -[IMAPAccount fetchSynchronouslyIsAuto:] + 144
9   com.apple.CoreFoundation                0x00007fff8a367efc __invoking___ + 140
10 com.apple.CoreFoundation                0x00007fff8a367d94 -[NSInvocation invoke] + 132
11 com.apple.MessageFramework              0x00007fff92590f68 -[MonitoredInvocation invoke] + 196
12 com.apple.MessageFramework              0x00007fff9256da79 -[ThrowingInvocationOperation main] + 33
13 com.apple.MessageFramework              0x00007fff9256da1f -[_MFInvocationOperation main] + 449
14 com.apple.Foundation                    0x00007fff9584a6b4 -[__NSOperationInternal start] + 705
15 com.apple.Foundation                    0x00007fff9585d912 ____NSOQSchedule_block_invoke_2 + 124
16 libdispatch.dylib                       0x00007fff924e0a86 _dispatch_call_block_and_release + 18
17 libdispatch.dylib                       0x00007fff924e1965 _dispatch_worker_thread2 + 255
18 libsystem_c.dylib                       0x00007fff89e243da _pthread_wqthread + 316
19 libsystem_c.dylib                       0x00007fff89e25b85 start_wqthread + 13
Thread 9:: -[MFAosImapAccount fetchSynchronouslyIsAuto:] Dispatch queue: com.apple.root.default-overcommit-priority
0   libsystem_kernel.dylib                  0x00007fff89dc9bf2 __psynch_mutexwait + 10
1   libsystem_c.dylib                       0x00007fff89e211a1 pthread_mutex_lock + 545
2   com.apple.Foundation                    0x00007fff9580c1ee -[NSLock lock] + 163
3   com.apple.MessageFramework              0x00007fff925aa5ec -[IMAPAccount _gatewayForMailboxUid:name:options:] + 128
4   com.apple.MessageFramework              0x00007fff925aa4ec -[IMAPAccount gatewayForStore:options:] + 126
5   com.apple.MessageFramework              0x00007fff925aa32f -[LibraryIMAPStore _gatewayCreateIfNeeded:options:] + 131
6   com.apple.MessageFramework              0x00007fff925a50e5 -[LibraryIMAPStore openSynchronouslyUpdatingMetadata:withOptions:] + 283
7   com.apple.MessageFramework              0x00007fff925f73be -[LibraryIMAPStore _fetchForCheckingNewMail:] + 51
8   com.apple.MessageFramework              0x00007fff925f6dfa -[IMAPAccount fetchSynchronouslyIsAuto:] + 144
9   com.apple.CoreFoundation                0x00007fff8a367efc __invoking___ + 140
10 com.apple.CoreFoundation                0x00007fff8a367d94 -[NSInvocation invoke] + 132
11 com.apple.MessageFramework              0x00007fff92590f68 -[MonitoredInvocation invoke] + 196
12 com.apple.MessageFramework              0x00007fff9256da79 -[ThrowingInvocationOperation main] + 33
13 com.apple.MessageFramework              0x00007fff9256da1f -[_MFInvocationOperation main] + 449
14 com.apple.Foundation                    0x00007fff9584a6b4 -[__NSOperationInternal start] + 705
15 com.apple.Foundation                    0x00007fff9585d912 ____NSOQSchedule_block_invoke_2 + 124
16 libdispatch.dylib                       0x00007fff924e0a86 _dispatch_call_block_and_release + 18
17 libdispatch.dylib                       0x00007fff924e1965 _dispatch_worker_thread2 + 255
18 libsystem_c.dylib                       0x00007fff89e243da _pthread_wqthread + 316
19 libsystem_c.dylib                       0x00007fff89e25b85 start_wqthread + 13
Thread 10:: -[LibraryIMAPStore openSynchronously] Dispatch queue: com.apple.root.default-overcommit-priority
0   libsystem_kernel.dylib                  0x00007fff89dc9bf2 __psynch_mutexwait + 10
1   libsystem_c.dylib                       0x00007fff89e211a1 pthread_mutex_lock + 545
2   com.apple.Foundation                    0x00007fff9580c1ee -[NSLock lock] + 163
3   com.apple.MessageFramework              0x00007fff925aa5ec -[IMAPAccount _gatewayForMailboxUid:name:options:] + 128
4   com.apple.MessageFramework              0x00007fff925aa4ec -[IMAPAccount gatewayForStore:options:] + 126
5   com.apple.MessageFramework              0x00007fff925aa32f -[LibraryIMAPStore _gatewayCreateIfNeeded:options:] + 131
6   com.apple.MessageFramework              0x00007fff925a50e5 -[LibraryIMAPStore openSynchronouslyUpdatingMetadata:withOptions:] + 283
7   com.apple.CoreFoundation                0x00007fff8a367efc __invoking___ + 140
8   com.apple.CoreFoundation                0x00007fff8a367d94 -[NSInvocation invoke] + 132
9   com.apple.MessageFramework              0x00007fff92590f68 -[MonitoredInvocation invoke] + 196
10 com.apple.MessageFramework              0x00007fff9256da79 -[ThrowingInvocationOperation main] + 33
11 com.apple.MessageFramework              0x00007fff9256da1f -[_MFInvocationOperation main] + 449
12 com.apple.Foundation                    0x00007fff9584a6b4 -[__NSOperationInternal start] + 705
13 com.apple.Foundation                    0x00007fff9585d912 ____NSOQSchedule_block_invoke_2 + 124
14 libdispatch.dylib                       0x00007fff924e0a86 _dispatch_call_block_and_release + 18
15 libdispatch.dylib                       0x00007fff924e1965 _dispatch_worker_thread2 + 255
16 libsystem_c.dylib                       0x00007fff89e243da _pthread_wqthread + 316
17 libsystem_c.dylib                       0x00007fff89e25b85 start_wqthread + 13
Thread 11:: -[LibraryIMAPStore openSynchronously] Dispatch queue: com.apple.root.default-overcommit-priority
0   libsystem_kernel.dylib                  0x00007fff89dc9bf2 __psynch_mutexwait + 10
1   libsystem_c.dylib                       0x00007fff89e211a1 pthread_mutex_lock + 545
2   com.apple.Foundation                    0x00007fff9580c1ee -[NSLock lock] + 163
3   com.apple.MessageFramework              0x00007fff925aa5ec -[IMAPAccount _gatewayForMailboxUid:name:options:] + 128
4   com.apple.MessageFramework              0x00007fff925aa4ec -[IMAPAccount gatewayForStore:options:] + 126
5   com.apple.MessageFramework              0x00007fff925aa32f -[LibraryIMAPStore _gatewayCreateIfNeeded:options:] + 131
6   com.apple.MessageFramework              0x00007fff925a50e5 -[LibraryIMAPStore openSynchronouslyUpdatingMetadata:withOptions:] + 283
7   com.apple.CoreFoundation                0x00007fff8a367efc __invoking___ + 140
8   com.apple.CoreFoundation                0x00007fff8a367d94 -[NSInvocation invoke] + 132
9   com.apple.MessageFramework              0x00007fff92590f68 -[MonitoredInvocation invoke] + 196
10 com.apple.MessageFramework              0x00007fff9256da79 -[ThrowingInvocationOperation main] + 33
11 com.apple.MessageFramework              0x00007fff9256da1f -[_MFInvocationOperation main] + 449
12 com.apple.Foundation                    0x00007fff9584a6b4 -[__NSOperationInternal start] + 705
13 com.apple.Foundation                    0x00007fff9585d912 ____NSOQSchedule_block_invoke_2 + 124
14 libdispatch.dylib                       0x00007fff924e0a86 _dispatch_call_block_and_release + 18
15 libdispatch.dylib                       0x00007fff924e1965 _dispatch_worker_thread2 + 255
16 libsystem_c.dylib                       0x00007fff89e243da _pthread_wqthread + 316
17 libsystem_c.dylib                       0x00007fff89e25b85 start_wqthread + 13
Thread 12:: CVDisplayLink
0   libsystem_kernel.dylib                  0x00007fff89dc9bca __psynch_cvwait + 10
1   libsystem_c.dylib                       0x00007fff89e26274 _pthread_cond_wait + 840
2   com.apple.CoreVideo                     0x00007fff91ca56c8 CVDisplayLink::runIOThread() + 710
3   com.apple.CoreVideo                     0x00007fff91ca53e9 _ZL13startIOThreadPv + 148
4   libsystem_c.dylib                       0x00007fff89e228bf _pthread_start + 335
5   libsystem_c.dylib                       0x00007fff89e25b75 thread_start + 13
Thread 13:: WebCore: LocalStorage
0   libsystem_kernel.dylib                  0x00007fff89dc9bca __psynch_cvwait + 10
1   libsystem_c.dylib                       0x00007fff89e26274 _pthread_cond_wait + 840
2   com.apple.JavaScriptCore                0x00007fff9099bde0 ***::ThreadCondition::timedWait(***::Mutex&, double) + 64
3   com.apple.WebCore                       0x00007fff8d4eb76a ***::MessageQueue<WebCore::LocalStorageTask>::waitForMessage() + 132
4   com.apple.WebCore                       0x00007fff8d4eb6c3 WebCore::LocalStorageThread::threadEntryPoint() + 99
5   com.apple.WebCore                       0x00007fff8d4eb60b WebCore::LocalStorageThread::threadEntryPointCallback(void*) + 9
6   libsystem_c.dylib                       0x00007fff89e228bf _pthread_start + 335
7   libsystem_c.dylib                       0x00007fff89e25b75 thread_start + 13
Thread 14:: com.apple.NSURLConnectionLoader
0   libsystem_kernel.dylib                  0x00007fff89dc867a mach_msg_trap + 10
1   libsystem_kernel.dylib                  0x00007fff89dc7d71 mach_msg + 73
2   com.apple.CoreFoundation                0x00007fff8a30250c __CFRunLoopServiceMachPort + 188
3   com.apple.CoreFoundation                0x00007fff8a30ac74 __CFRunLoopRun + 1204
4   com.apple.CoreFoundation                0x00007fff8a30a486 CFRunLoopRunSpecific + 230
5   com.apple.Foundation                    0x00007fff95867fd7 +[NSURLConnection(NSURLConnectionReallyInternal) _resourceLoadLoop:] + 335
6   com.apple.Foundation                    0x00007fff9585c72a -[NSThread main] + 68
7   com.apple.Foundation                    0x00007fff9585c6a2 __NSThread__main__ + 1575
8   libsystem_c.dylib                       0x00007fff89e228bf _pthread_start + 335
9   libsystem_c.dylib                       0x00007fff89e25b75 thread_start + 13
Thread 15:: JavaScriptCore::Marking
0   libsystem_kernel.dylib                  0x00007fff89dc9bca __psynch_cvwait + 10
1   libsystem_c.dylib                       0x00007fff89e26274 _pthread_cond_wait + 840
2   com.apple.JavaScriptCore                0x00007fff90c127ed JSC::SlotVisitor::drainFromShared(JSC::SlotVisitor::SharedDrainMode) + 493
3   com.apple.JavaScriptCore                0x00007fff90c12a40 JSC::MarkStackThreadSharedData::markingThreadMain() + 272
4   com.apple.JavaScriptCore                0x00007fff90c12ae9 JSC::MarkStackThreadSharedData::markingThreadStartFunc(void*) + 9
5   libsystem_c.dylib                       0x00007fff89e228bf _pthread_start + 335
6   libsystem_c.dylib                       0x00007fff89e25b75 thread_start + 13
Thread 16:: JavaScriptCore::BlockFree
0   libsystem_kernel.dylib                  0x00007fff89dc9bca __psynch_cvwait + 10
1   libsystem_c.dylib                       0x00007fff89e26274 _pthread_cond_wait + 840
2   com.apple.JavaScriptCore                0x00007fff9099be37 ***::ThreadCondition::timedWait(***::Mutex&, double) + 151
3   com.apple.JavaScriptCore                0x00007fff90c1b12c JSC::Heap::blockFreeingThreadMain() + 300
4   com.apple.JavaScriptCore                0x00007fff90c1b169 JSC::Heap::blockFreeingThreadStartFunc(void*) + 9
5   libsystem_c.dylib                       0x00007fff89e228bf _pthread_start + 335
6   libsystem_c.dylib                       0x00007fff89e25b75 thread_start + 13
Thread 17:: -[POPAccount fetchSynchronouslyIsAuto:] Dispatch queue: com.apple.root.default-overcommit-priority
0   libsystem_kernel.dylib                  0x00007fff89dca7e6 kevent + 10
1   libsystem_info.dylib                    0x00007fff96c1cfe5 _mdns_search + 1537
2   libsystem_info.dylib                    0x00007fff96c1d8b7 mdns_addrinfo + 615
3   libsystem_info.dylib                    0x00007fff96c1e151 search_addrinfo + 152
4   libsystem_info.dylib                    0x00007fff96c21a1c si_addrinfo + 1614
5   libsystem_info.dylib                    0x00007fff96c19795 getaddrinfo + 166
6   com.apple.SystemConfiguration           0x00007fff90d9c061 __SCNetworkReachabilityGetFlags + 2037
7   com.apple.SystemConfiguration           0x00007fff90d9b841 SCNetworkReachabilityGetFlags + 163
8   com.apple.MessageFramework              0x00007fff925ae764 -[NetworkController isHostReachable:] + 141
9   com.apple.MessageFramework              0x00007fff925addc6 -[_NSSocket connectToHost:withPort:protocol:] + 188
10 com.apple.MessageFramework              0x00007fff925ad24d -[Connection _connectUsingHostname:onPort:securityLayerType:clientIdentity:accountClass:] + 747
11 com.apple.MessageFramework              0x00007fff925acdf6 -[Connection _connectUsingAccount:securityLayerType:] + 224
12 com.apple.MessageFramework              0x00007fff925aca52 -[Connection connectAndSetSecurityLayerUsingAccount:] + 181
13 com.apple.MessageFramework              0x00007fff925ac91d -[Connection connectUsingAccount:] + 80
14 com.apple.MessageFramework              0x00007fff9264d87e -[Account _connectAndAuthenticate:] + 147
15 com.apple.MessageFramework              0x00007fff9264dc5b -[Account authenticatedConnection] + 86
16 com.apple.MessageFramework              0x00007fff92787f17 -[POP3FetchStore _authenticatedConnection] + 51
17 com.apple.MessageFramework              0x00007fff9278831d -[POP3FetchStore fetchSynchronously] + 367
18 com.apple.MessageFramework              0x00007fff9278a832 -[POPAccount fetchSynchronously] + 154
19 com.apple.CoreFoundation                0x00007fff8a367efc __invoking___ + 140
20 com.apple.CoreFoundation                0x00007fff8a367d94 -[NSInvocation invoke] + 132
21 com.apple.MessageFramework              0x00007fff92590f68 -[MonitoredInvocation invoke] + 196
22 com.apple.MessageFramework              0x00007fff9256da79 -[ThrowingInvocationOperation main] + 33
23 com.apple.MessageFramework              0x00007fff9256da1f -[_MFInvocationOperation main] + 449
24 com.apple.Foundation                    0x00007fff9584a6b4 -[__NSOperationInternal start] + 705
25 com.apple.Foundation                    0x00007fff9585d912 ____NSOQSchedule_block_invoke_2 + 124
26 libdispatch.dylib                       0x00007fff924e0a86 _dispatch_call_block_and_release + 18
27 libdispatch.dylib                       0x00007fff924e1965 _dispatch_worker_thread2 + 255
28 libsystem_c.dylib                       0x00007fff89e243da _pthread_wqthread + 316
29 libsystem_c.dylib                       0x00007fff89e25b85 start_wqthread + 13
Thread 18:: -[MFAosImapAccount _synchronizeAccountWithServerWithUserInput:] Dispatch queue: com.apple.root.default-overcommit-priority
0   libsystem_kernel.dylib                  0x00007fff89dc9bf2 __psynch_mutexwait + 10
1   libsystem_c.dylib                       0x00007fff89e211a1 pthread_mutex_lock + 545
2   com.apple.Foundation                    0x00007fff9580c1ee -[NSLock lock] + 163
3   com.apple.MessageFramework              0x00007fff925aa5ec -[IMAPAccount _gatewayForMailboxUid:name:options:] + 128
4   com.apple.MessageFramework              0x00007fff925aa4ec -[IMAPAccount gatewayForStore:options:] + 126
5   com.apple.MessageFramework              0x00007fff92604bc3 -[IMAPAccount _listingForMailboxUid:listAllChildren:onlySubscribed:withUserInput:] + 96
6   com.apple.MessageFramework              0x00007fff92604739 -[IMAPAccount _listingForMailboxUid:listAllChildren:withUserInput:] + 80
7   com.apple.MessageFramework              0x00007fff9260468a -[IMAPAccount _synchronizeMailboxListWithUserInput:] + 67
8   com.apple.MessageFramework              0x00007fff925fc2ee -[RemoteStoreAccount _synchronizeAccountWithServerWithUserInput:] + 329
9   com.apple.MessageFramework              0x00007fff925fbf8a -[IMAPAccount _synchronizeAccountWithServerWithUserInput:] + 43
10 com.apple.CoreFoundation                0x00007fff8a367efc __invoking___ + 140
11 com.apple.CoreFoundation                0x00007fff8a367d94 -[NSInvocation invoke] + 132
12 com.apple.MessageFramework              0x00007fff92590f68 -[MonitoredInvocation invoke] + 196
13 com.apple.MessageFramework              0x00007fff9256da79 -[ThrowingInvocationOperation main] + 33
14 com.apple.MessageFramework              0x00007fff9256da1f -[_MFInvocationOperation main] + 449
15 com.apple.Foundation                    0x00007fff9584a6b4 -[__NSOperationInternal start] + 705
16 com.apple.Foundation                    0x00007fff9585d912 ____NSOQSchedule_block_invoke_2 + 124
17 libdispatch.dylib                       0x00007fff924e0a86 _dispatch_call_block_and_release + 18
18 libdispatch.dylib                       0x00007fff924e1965 _dispatch_worker_thread2 + 255
19 libsystem_c.dylib                       0x00007fff89e243da _pthread_wqthread + 316
20 libsystem_c.dylib                       0x00007fff89e25b85 start_wqthread + 13
Thread 19:: -[IMAPAccount _synchronizeAccountWithServerWithUserInput:] Dispatch queue: com.apple.root.default-overcommit-priority
0   libsystem_kernel.dylib                  0x00007fff89dc9bf2 __psynch_mutexwait + 10
1   libsystem_c.dylib                       0x00007fff89e211a1 pthread_mutex_lock + 545
2   com.apple.Foundation                    0x00007fff9580c1ee -[NSLock lock] + 163
3   com.apple.MessageFramework              0x00007fff925aa5ec -[IMAPAccount _gatewayForMailboxUid:name:options:] + 128
4   com.apple.MessageFramework              0x00007fff925aa4ec -[IMAPAccount gatewayForStore:options:] + 126
5   com.apple.MessageFramework              0x00007fff92604bc3 -[IMAPAccount _listingForMailboxUid:listAllChildren:onlySubscribed:withUserInput:] + 96
6   com.apple.MessageFramework              0x00007fff92604739 -[IMAPAccount _listingForMailboxUid:listAllChildren:withUserInput:] + 80
7   com.apple.MessageFramework              0x00007fff9260468a -[IMAPAccount _synchronizeMailboxListWithUserInput:] + 67
8   com.apple.MessageFramework              0x00007fff925fc2ee -[RemoteStoreAccount _synchronizeAccountWithServerWithUserInput:] + 329
9   com.apple.MessageFramework              0x00007fff925fbf8a -[IMAPAccount _synchronizeAccountWithServerWithUserInput:] + 43
10 com.apple.CoreFoundation                0x00007fff8a367efc __invoking___ + 140
11 com.apple.CoreFoundation                0x00007fff8a367d94 -[NSInvocation invoke] + 132
12 com.apple.MessageFramework              0x00007fff92590f68 -[MonitoredInvocation invoke] + 196
13 com.apple.MessageFramework              0x00007fff9256da79 -[ThrowingInvocationOperation main] + 33
14 com.apple.MessageFramework              0x00007fff9256da1f -[_MFInvocationOperation main] + 449
15 com.apple.Foundation                    0x00007fff9584a6b4 -[__NSOperationInternal start] + 705
16 com.apple.Foundation                    0x00007fff9585d912 ____NSOQSchedule_block_invoke_2 + 124
17 libdispatch.dylib                       0x00007fff924e0a86 _dispatch_call_block_and_release + 18
18 libdispatch.dylib                       0x00007fff924e1965 _dispatch_worker_thread2 + 255
19 libsystem_c.dylib                       0x00007fff89e243da _pthread_wqthread + 316
20 libsystem_c.dylib                       0x00007fff89e25b85 start_wqthread + 13
Thread 20:
0   libsystem_kernel.dylib                  0x00007fff89dca192 __workq_kernreturn + 10
1   libsystem_c.dylib                       0x00007fff89e24594 _pthread_wqthread + 758
2   libsystem_c.dylib                       0x00007fff89e25b85 start_wqthread + 13
Thread 21:
0   libsystem_kernel.dylib                  0x00007fff89dc9e42 __semwait_signal + 10
1   libsystem_c.dylib                       0x00007fff89dd8dea nanosleep + 164
2   libsystem_c.dylib                       0x00007fff89dd8bb5 usleep + 53
3   com.apple.AOSKit                        0x00007fff8f4ba0b8 -[AOSRequest sendSynchronously] + 56
4   com.apple.AOSKit                        0x00007fff8f4bfa68 -[AOSConfig setupInfo] + 237
5   com.apple.AOSKit                        0x00007fff8f4bf3e6 +[AOSConfig validationURLWithAppleID:andCurrentClient:] + 57
6   com.apple.AOSKit                        0x00007fff8f4b6b9c -[AOSThreadManager AOSKPersistAccountData:] + 1416
7   com.apple.Foundation                    0x00007fff9585c72a -[NSThread main] + 68
8   com.apple.Foundation                    0x00007fff9585c6a2 __NSThread__main__ + 1575
9   libsystem_c.dylib                       0x00007fff89e228bf _pthread_start + 335
10 libsystem_c.dylib                       0x00007fff89e25b75 thread_start + 13
Thread 22:
0   libsystem_kernel.dylib                  0x00007fff89dc867a mach_msg_trap + 10
1   libsystem_kernel.dylib                  0x00007fff89dc7d71 mach_msg + 73
2   com.apple.CoreFoundation                0x00007fff8a30250c __CFRunLoopServiceMachPort + 188
3   com.apple.CoreFoundation                0x00007fff8a30ac74 __CFRunLoopRun + 1204
4   com.apple.CoreFoundation                0x00007fff8a30a486 CFRunLoopRunSpecific + 230
5   com.apple.CoreFoundation                0x00007fff8a31a19f CFRunLoopRun + 95
6   com.apple.AOSKit                        0x00007fff8f4ba031 -[AOSRequest _runRequestThread] + 306
7   com.apple.Foundation                    0x00007fff9585c72a -[NSThread main] + 68
8   com.apple.Foundation                    0x00007fff9585c6a2 __NSThread__main__ + 1575
9   libsystem_c.dylib                       0x00007fff89e228bf _pthread_start + 335
10 libsystem_c.dylib                       0x00007fff89e25b75 thread_start + 13
Thread 23:: com.apple.appkit-heartbeat
0   libsystem_kernel.dylib                  0x00007fff89dc9e42 __semwait_signal + 10
1   libsystem_c.dylib                       0x00007fff89dd8dea nanosleep + 164
2   libsystem_c.dylib                       0x00007fff89dd8bb5 usleep + 53
3   com.apple.AppKit                        0x00007fff8b3d14d3 -[NSUIHeartBeat _heartBeatThread:] + 1727
4   com.apple.Foundation                    0x00007fff9585c72a -[NSThread main] + 68
5   com.apple.Foundation                    0x00007fff9585c6a2 __NSThread__main__ + 1575
6   libsystem_c.dylib                       0x00007fff89e228bf _pthread_start + 335
7   libsystem_c.dylib                       0x00007fff89e25b75 thread_start + 13
Thread 24:
0   libsystem_kernel.dylib                  0x00007fff89dca192 __workq_kernreturn + 10
1   libsystem_c.dylib                       0x00007fff89e24594 _pthread_wqthread + 758
2   libsystem_c.dylib                       0x00007fff89e25b85 start_wqthread + 13
Thread 25:
0   libsystem_kernel.dylib                  0x00007fff89dca192 __workq_kernreturn + 10
1   libsystem_c.dylib                       0x00007fff89e24594 _pthread_wqthread + 758
2   libsystem_c.dylib                       0x00007fff89e25b85 start_wqthread + 13
Thread 26:
0   libsystem_kernel.dylib

Upgrade Sharepoint 2010 SQL Reporting Services from 2008 R2 to 2014

I'm about to do the upgrade of SharePoint 2010 Reporting Services from 2008 R2 to 2014. The instructions say it can be done "in-place" with no downtime. I've seen this article:
http://whitepages.unlimitedviz.com/2012/03/upgrading-sql-server-reporting-services-to-2012-in-sharepoint-integrated-mode/
It covers 2012 so I assume the same holds true for 2014.
I'd like to get the low down from anyone who has actually performed the upgrade of SSRS from 2008 R2 to 2014. Anyone done this upgrade? Any issues?
David Jenkins

So far I would have to say that the upgrade can be done "in-place" but there is a "DOWNTIME".
This article has helped a lot:
http://blogs.catapultsystems.com/tlingenfelder/archive/2012/07/10/upgrading-sql-server-reporting-services-2008-r2-to-sql-server-reporting-services-2012-in-sharepoint.aspx
In the article it tells you about a bug in the SQL Upgrade process where
the Domain account you use will not work. When you type in the password it fails. On top of that it will lock the Domain account because of a bad password! There is probably something wrong with the authentication process and it garbles the password.
Anyway, you end up having to change the account to the "Network Service" account before you can do the upgrade. This means the services get restarted which means???
DOWN TIME! He goes over other errors. I haven't reviewed these issues yet.
The other thing I learned is that everything needs to be SQL Server 2008 R2 SP2 in order to upgrade. You don't find this out until almost the last step in the installation process.
Now I have to wait until next week to actually do the upgrade because I have to schedule an SP2 install. :(
David Jenkins

Powershell commands for VM backups in 2012 vs 2008

I have a powershell routine that is used by task scheduler that will shut down one or more Hyper-v VMs from a list, create a backup of the VHD file(s) then restart the VM(s). It works great in 2008 but when I copied it over to a 2012 host, it
didn't do anything. I was wondering if powershell commands from 2008 still work in 2012 or if they've been completely rewritten. If they are the same, then I'll assume "operator error" and keep trying. If they have changed, then
I know that I'll be spending my week googling around for how to use the new commands. Thanks.

Hello
You can use below powershell comand for Server 2012 host.
$backuppolicy = New-WBPolicy
Get-WBVirtualMachine | Add-WBVirtualMachine -Policy $backuppolicy
$targetfolder = New-WBBackupTarget -NetworkPath
\\FileServerName\e$\BackupFolder -Credential (Get-Credential)
Add-WBBackupTarget -Policy $backuppolicy -Target $targetfolder
Set-WBSchedule -Policy $backuppolicy -Schedule 12:00,09:00
$backuppolicy
Set-WBPolicy $backkuppolicy
Start-WBBackup -Policy $backuppolicy
http://get-itlabs.com/ucretsiz-windows-hyper-v-server-2012-r2-backup/
Ersin CAN - TAT MCSE - Private Cloud. www.get-itlabs.com

I have an iMac from 2008. When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen. Now just back and forth blue to light blur

I have an iMac from 2008. When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen. Now just back and forth blue to light blur

Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Need help speeding up my old iMac from 2008 - defragment?

I have an old 20 inch iMac from 2008. It is a 2.66 GHz Intel Core 2 Duo with 4 GB of Ram. Its still running Leopard 10.5.8, which is te last version of Leopard (I believe).
I have several questions, but I will start with the biggest one.
How can I speed it up? It runs very sluggishly and I've tried just about everything to try to get it to speed up. I've done all the recommended things, such as removing unnecessary startup programs, repairing disk permissions, freeing up hard drive space, monitoring the task manager for processes that take up a lot of CPU power and I've added more ram. The CPU can be at 90% idle and it will still act slow.
I know its not the software because its as old as the OS, so the system should be able to handle it, for example, I am running Adobe CS3. A friend told me that maybe I need to defragment. I read that after a certain OSX version the system does not need to defrag because the OS prevents the hard drive from fragmenting in the first place. Plus, there is no utility to defrag in the OS. I also read somewhere that if you do happen to fill up your hard drive to the very brim the data will fragment regardless. I did fill the hard drive to the brim -- to about 500 MB of free space. Since then I have freed up about 100 GB, but its slow.
Should I find a way to defragment? If so, is there any 3rd party software that is recomended for an old system like this?
I have tons more questions, such as:
- How to upgrade the OS to Snow Leopard, Lion or Mountain Lion.
- Should I backup the system via Time Machine before upgrading the OS to Snow Leopard, Lion or Mountain Lion?
- If I do upgrade my OS will my software be incompatible and do I need the original software discs to reinstall them?
- Why does my Time Machine take so long to backup?
I'd like to start with an answer about defragmenting.

Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with a visit to: OS X Maintenance - MacAttorney.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion/Mountain Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion/Mountain Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

Activating/changing Multipoint server 2012 from evaluation to licensed

Hi
Could you please help in how to activate or change the Windows Multipoint server 2012 from evaluation to licensed one?
Below URL is for Windows server 2012, is this the same steps i need to follow?
http://technet.microsoft.com/en-us/library/jj574204.aspx
Thanks for your help!!

according to this you should be able to
http://technet.microsoft.com/en-us/library/dn303416.aspx
Upgrade means
moving from your existing operating system release to a more recent release, while staying on the same hardware. For example, if your server is running Windows Server 2012, you can upgrade it to Windows Server 2012 R2. You can upgrade from an evaluation version
of the operating system to a retail version, from an older retail version to a newer version, or, in some cases, from a volume-licensed edition of the operating system to an ordinary retail edition.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

W32time NTP server Windows Server 2012 o 2008 R2

Hello All
I have a one problem, I have configured of NTP Server of this way, but when restarted server the time not changed, The server not to synchronized with NTP server.
1. Run Regedit
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\W32Time\Parameters\Type
Change from NT5DS to NTP
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\W32Time\Config\AnnounceFlags
Edit the DWORD Value to 5. notice that the default value is “a”
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\W32Time\TimeProvides\NTPServer\Enabled
Change the value from 0 to 1
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\W32Time\Parameters\NtpServer
Change from time.windows.com,0x1 to the IP address of NTP time Server. For example, 1.pool.ntp.org,0×1
Net Stop W32time /Net Start W32time
Some have idea about of this problem?
Hugo Monge

Hi Hugo,
>>W32time NTP server Windows Server 2012 o 2008 R2
Before going further, what does this mean?
Regarding how to configure an authoritative time server in Windows Server, the following articles can be referred to as reference.
How to configure an authoritative time server in Windows Server
http://support.microsoft.com/kb/816042
Configuring a time source for the forest
https://technet.microsoft.com/en-us/library/cc784800(v=ws.10).aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Reassigning volumes to 2012 from 2008

Similar Messages

Maybe you are looking for