Reassignment of online FC port to a new VSAN wont come online

FC ports that are in VSAN 1 (default) and need to be in customer defined VSAN 100. Use port properties on the device manager to change VSAN from teh pull down. Port will not come online in new VSAN, but will go back online in it's original (1) VSAN. What is nessasary to get ports moved to a different VSAN?

Thanks Ralf for the response.. I have used the GUI and command line to take the port offline and back on and change the VSAN many times with no success. The VSAN was created months go and has about 80 member ports so far. The HBA is powered up and does join the original VSAN (1) and come online, there seems to be something buggish about the fact that it won't jion VSAN 100 as you described above. it begins by initializing, then goes offline?? Should I call it into the TAC?

Similar Messages

  • Playlists for new computer wont come up on itunes

    Got a new computer, my old playlists wont come up

    Answer (for me):
    My iPod would show up nowhere, like you, so i tried everything in the forums and on the support website (even the HP thing, which didnt work for me...)
    So yesterday I plugged it into my sister's laptop, who also has an ipod nano and itunes, and it showed up. I did a restore with one of her old updaters and now it works fine on my computer!
    Hope this helps....

  • New ipod5 wont come out of itunes.

    I have a brand new ipod 5. I tried to set it up through icloud but it wouldn't work so I went through Itunes. She has a ipod 4 and I was trying to convert it all over with the same icloud id.  My computer downloaded everything fine but at the end it said that the ipod didnt download correctly or there was an error. Now computer wont recognize device and ipod wont get off the itunes screen. I cannot do anything with the brand new ipod. I've tried turning it off and nothing...same screen. Shows itunes and plug in.....HELP!

    Without knowing the exact wording of the error message:
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Can I put a Moshi Mini DisplayPort to HDMI Adapter (with audio) in a thunderbolt port in the new macBook Pro

    can I put a Moshi Mini DisplayPort to HDMI Adapter (with audio) in a thunderbolt port in the new macBook Pro, will it work?

    Should work perfectly.

  • How do I add more ports to my new Airport Extreme?

    How do I add more ports to my new Airport Extreme?  What do I need to buy?

    Thinking to leave as is for now-  one 2013 extreme.
    That would certainly keep things a lot simpler.
    Does it seem right that using speed test I'm getting similar speeds, no matter if I'm connected via wi-fi, or Ethernet?
    A very good sign assuming those speeds are reasonably close to the your plan offered by your ISP. The Extreme itself is capable of much faster speeds than your ISP can ever hope to provide.
    I'm thinking that all the speed in the world is not going to change Time Warner Cable, the provider for earthlink cable
    Not sure what you mean here. Time Warner provides various plans, some up to 50 Mbps. I get 60+ consistently with this plan.  I had a 30 Mpbs plan before that consistently delivered about 35-36 Mbps.
    The math is simple. If you download a lot of files from the Internet, a 50 Mbps connection is going to take half as long to download a file as a 25 Mbps connection, for example.
    One word of caution though....if you try a higher speed plan...plan to stay, as you will never go back to slower speeds once you have sampled higher speeds. Comcast now owns Time Warner by the way. I don't know whether that will be a good thing or a bad thing.

  • Ipod Touch not recognized by USB port on my new radio! PLEASE help?!?!?

    Ok, so I just bought a new radio for my car so I can listen to my ipod touch 2nd gen (with the latest 3.0 software) through my speakers. Ok, that's all great, but the problem is that when I connect my ipod touch through the USB port on my new radio, it reads "device error"...
    My radio is an Alpine CDE-102. It does have an AUX input, and I can easily get a cable to fix this problem... but I'm wondering why my ipod touch doesn't show up through the USB?!?! And I don't know how AUX input sounds compared to USB input (probably less quality than the USB...)
    So, can you help me? I've also connected my ipod touch to my xbox 360 and it shows up as a camera - can't play music... all part of the same problem I guess...
    This is a SERIOUSLY annoying problem especially since I just dropped some cash on the new radio which might not even WORK!!! AHHHHH! A problem with the USB cable? Problem with the Ipod? Problem with the stereo? I'm not quite sure what to think...

    That is the ONLY cable that will work with that radio:
    http://www.alpine-usa.com/US-en/products/product.php?model=CDE-102&view=Specs
    From reading the manual for your iPod I'm pretty certain the connector is on the rear of your unit.
    You can connect an Auxiliary cable to the headphone out on your Touch to the AUX in on the radio but you will have to control everything with the iPod and it will not charge.
    The cable is $30, why don't you ask how much they would charge you to install it?

  • Is there a fix for a dead ethernet port besides a new logic board?

    My ethernet port went dead on my IMac.  I unplugged the ethernet cable and plugged it into my laptop and it worked instantly.  I am still able to connect wirelessly.  I bought an apple USB to Ethernet converter and plugged it in.  It worked for about 3 days and then it went dead.  Once again I was able to unplug the ethernet cable, plug it into my laptop and instantly had a connection.  Is there a fix for a dead ethernet port besides a new logic board and if not how do I figure out which logic board I need?
    Thanks
    Step

    This problem baffled me. I kept getting the "ethernet cable unplugged" error after testing my cables good. Was abut to write it off as port gone bad when I found this thread.
    The YouTube video reference above fixed my problem. (http://www.youtube.com/watch?v=u1P6X87qArs)
    Basically go to SETTINGS/NETWORK. Then highlight your ETHERNET port and click the ADVANCED button. From there click the HARDWARE tab.
    Set
    CONFIGURE to MANUALLY
    SPEED to whatever your ethernet speed is, in my case 1000baseT
    DUPLEX - FULL DUPLEX, FLOW CONTROL
    Leave MTU at Standard
    Hit OK.
    Then don't forget to hit APPLY. I didn't do this the first couple of times assuming hitting OK applied these settings. You gotta hit APPLY.
    In about two seconds, my Ethernet connected again.
    I went back and reset it to AUTOMATIC just to test and after doing so got the cable unplugged error again. So I am leaving it on manual and it's working.

  • How can I transfer my files/system in VAIO laptop (w/ S400 Firewire port) to my New Macbook Pro?

    How can I transfer my files/system in VAIO laptop (w/ S400 Firewire port) to my New Macbook Pro?
    Do I need to buy an adapter? How do I setup the software to make these two system connected?

    r95941081 wrote:
    Thanks for your answering. But the issue is that I'll often transfer a large amount files from PCs to the Macbook, and I'm explring the way to use firewire since there is indeed an i-S400 port in the VAIO laptop, and it's much faster.
    USB 2 is faster than Firewire 400 and USB 3 is faster than Firewire 800
    If it was another Mac you were transferring from then you could use Firewire Target Disk Mode which makes the boot drive of the old Mac appear on the desktop of the new Mac to rapidly copy files, but you have a Windows PC with no FWTDM capability.
    So to connect the two machines requires a network be setup over Ethernet and mucking around with the complexities of all that and it still takes awhile to finish. One can't setup a network with a PC over USB or Firewire, only Firewire with another Mac.
    You get a external USB drive, USB 3,2,1 is fine and just drag and drop copy, the machine does all the work and you go do something else until it's finished, then repeat the same with the Mac.
    Fast simple and effective, let it copy overnight if you have too.
    I routinely clone my entire hard drive via USB 2 and it only takes a hour and a half for 350GB.
    By the time you figure out how to network a Mac and a PC over Ethernet and getting it work to transfer files, you could be done already via USB.

  • Problems trying to migrating ports to a new Vlan using an externar DHCP server

    Hello, here is the thing. I have the following configuration in my Core Switch:
    interface Vlan1
     ip address 10.24.74.1 255.255.254.0 secondary
     ip address 192.0.2.54 255.255.255.0
     ip helper-address 10.24.86.22
     no ip redirects
    As you see, we are using an external DHCP server for the Vlan1 and it is working:
    Internet  192.0.2.98              0   3c97.0e23.3d8d  ARPA   Vlan1
    Internet  192.0.2.194             0   e89a.8f77.36a0  ARPA   Vlan1
    Internet  192.0.2.195             0   e89a.8f77.01ab  ARPA   Vlan1
    Internet  192.0.2.198             2   001c.25de.acaa  ARPA   Vlan1
    Internet  192.0.2.199             0   d8eb.97a6.30a4  ARPA   Vlan1
    Internet  192.0.2.196             0   f0de.f1f1.1e06  ARPA   Vlan1
    Internet  192.0.2.203             0   e89a.8f77.016f  ARPA   Vlan1
    Internet  192.0.2.207             4   d0c7.89d6.3ba3  ARPA   Vlan1
    Internet  192.0.2.211             0   4437.e636.7ef7  ARPA   Vlan1
    But, when a try to migrate this port to a new Vlan (Vlan50), I got the following issue: 
    001290: Jul 23 08:27:44.705 GMT: DHCPD: DHCPREQUEST received from client 013c.970e.233d.8d.
    001291: Jul 23 08:27:44.705 GMT: DHCPD: client has moved to a new subnet.
    001292: Jul 23 08:27:44.705 GMT: DHCPD: Sending DHCPNAK to client 013c.970e.233d.8d.
    001293: Jul 23 08:27:44.705 GMT: DHCPD: broadcasting BOOTREPLY to client 3c97.0e23.3d8d.
    001294: Jul 23 08:27:44.725 GMT: dhcp_snooping_get_ingress_port: Interface src_index 0xF
    001295: Jul 23 08:27:44.725 GMT: DHCPD: DHCPDISCOVER received from client 013c.970e.233d.8d on interface Vlan50.
    001296: Jul 23 08:27:44.725 GMT: DHCPD: there is no address pool for 10.24.76.1.
    001297: Jul 23 08:27:44.725 GMT: DHCPD: setting giaddr to 10.24.76.1.
    001298: Jul 23 08:27:44.725 GMT: DHCPD: BOOTREQUEST from 013c.970e.233d.8d forwarded to 10.24.86.21.
    Any suggestions,
    Thank you in advance,

    Just to help someone who has the same issue.
    I found this on the web site:
    When the server receives a DHCPREQUEST from a client in the RENEWING (or REBINDING) state, it normally grants the renewal only if the client has an unexpired lease with this server. Otherwise the server ignores the request; the server to which the client is bound should answer the client. (The only exception is normally that if a server is sure the IP address the client is asking for is inappropriate for the client, the server will send a DHCPNAK, which forces the client back to the INIT state.)
    Thank you anyway

  • Using both the display ports on the new mac book pro

    Hi, are there some one in Appel that can tell me if its possible to use both the display ports on the new mac book pro to show keynote on? or if its possible to make that possible? i would really like to be able to create a keynote with 5120 x 1600 pixels and get that output on two display ports, so that i can use my hardware to make a keynote with really nice reselution. its for use on a screen size of 18x4 meter.

    Connect one display to the Mini-Displayport and the other to a USB port using an adapter like this:
    http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/
    Or buy a Matrox DualHead2Go DP Edition external video box and connect both displays to that, which in turn connects to the Mini-Displayport on the computer.
    There are limitations either way. A USB-connected display will be less responsive than one connected to the MDP, because USB 2 is slow. To use two displays with the Matrox box, I believe the displays must be identical. Read and understand all the caveats about each alternative before making a decision about which way to go.

  • The USB port on the new keyboards

    Hi,
    I'd just like to have your opinion about the placement of the USB port on the new mac keyboard. I think it is a pity that they are so far away under the keyboard. It makes them difficult to access. Besides, what if your USB device is a bit large. You cannot plug it in for pure physical reasons.
    Another mistake from apple? What do you think?

    dwb wrote:
    But I could counter that my wife likes the way the USB port is recessed because her thumb drive fits perfectly doesn't protrude from the keyboard unlike with other keyboards. Since getting this keyboard she hasn't knocked her thumb drive lose and hasn't set her drink on it. And let's be serious - how difficult is it to lift up the keyboard to plug in a device? How onerous is it to buy a little extender if you do find lifting the keyboard such a time wasting task? Okay, I'll tone down the sarcasm
    Thanks. Point is, it adds an extra step. Macs should be more user friendly. No, it is not hard to lift the keyboard, but why should we have to when before you just saw the port and attached away?
    If you want to complain about design decisions, let's ask a few questions that might be more serious? Why is the power button hidden on back in stead of conveniently in front? Why isn't there at least a visual cue telling is where to insert a disc? Why isn't there a way to vertically adjust the display? Why are all the ports on back? Wouldn't it be convenient to have at least one USB port in front? Where is the little LED that pulses to let us know the computer is asleep?
    Well, this thread wasn't directed at the new iMac's other design quirks, but since you bring it up.
    1) Yes, that power button in the back left me scratching my head. I'm used to it now, but it is another good example of form over function.
    2) I insterted a disc backwards the first time, silly me.
    3) It is so big, why do you need to vertically adjust it?
    4) Ports on the front would make things easier, yet. And you wouldn't have to lift the keyboard But it would interfere with the clean appearance.
    5) I miss that LED too....

  • Firefox is refusing to start. It says that my profile is missing, which it appears to be. Yet the way in which one goes about creating a new profile wont' work either. Anybody have a bloody clue what's going on and how to fix it?

    Firefox is refusing to start. It says that my profile is missing, which it appears to be. Yet the way in which one goes about creating a new profile wont' work either. Anybody have a bloody clue what's going on and how to fix it?

    AIR give you classes to detect an on-line or off-line status, it's in 
    this way for the sake of flexibility for instance what happens if you 
    only what to sync  data only on Saturdays at 2 am? If it were done 
    automatically that'll be a problem. And it isn't so complicated.
    You can download the SalesBuilder from AIR examples at www.adobe.com/devnet/air
      it's an application that does everything you have in mind.
    I don't understand your question abou file types.
    An AIR app can communicate with almost every backend served tech 
    CF, .Net, PHP, RoR.
    Sincerely,
    Michael
    El 14/05/2009, a las 8:48, IrishAIRMax <[email protected]> escribió:
    >
    I have to say that I'm loving the picture! well cool!
    >
    Sorry but I don't quiet understand. I thought AIR did the updating 
    automatically? I didn't realise the developer had to program the 
    logic of how the updates take place?  Is it a case in most AIR apps 
    that when online the app updates the server and once every intervel 
    (of however long) the local SQLite DB is synced to the more updated 
    server DB. Then when offline the developer has to sense that the app 
    is offline and store a log manually of the updates without any help 
    from AIR itself, and then update once it comes online again?
    >
    Can AIR link to anything more than a database on the server side 
    apart from webservices, for example .as files or any other file types?
    >
    What type of server is a Flex app stored on, is it a specific Adobe 
    server rather than a Java or .NET server?
    >
    Thank you so much for your last comment!
    IrishAIRMax
    >

  • My new ipad wont make purchases from the app store, asks to verify payment info... I enter it and it says contact itunes support, whats the deal?

    my new ipad wont make purchases from the app store, asks to verify payment info... I enter it and it says contact itunes support, whats the deal?

    FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
    For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
    Phone: 800-275-2273 How to reach a live person: Press 0 four times
    Hours of Operation: Mon-Fri: 9am-5pm ET
    Email: [email protected]
    How to report an issue with Your iTunes Store purchase
    http://support.apple.com/kb/HT1933
    How to Get a Refund from the App Store
    http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
     Cheers, Tom

  • I have just changed my sim from vodaphone to tmobile and my new sim wont work it is coming up emergency calls only, the iphone is not a vodaphone phone and as i am awhere it is a unlocked handet, can anyone give me advice pls

    i have just changed my sim from vodaphone to tmobile and my new sim wont work it is coming up emergency calls only, the iphone is not a vodaphone phone and as i am awhere it is a unlocked handet, can anyone give me advice pls

    You will have to ask Vodafone to do it for you.
    Here is a link to their online form http://campaigns.vodafone.co.uk/UnlockCodeRequestForm/

  • I am looking to buy an imac, should i wait a bit for a new version to come out soon?  I use it for photo and video editing

    I have a very old MBP it is almost too slow to edit large files and video on any more it does ok but I am a pro photographer and video guy and I edit a lot
    I would like to know if I should get a new imac right now or wait a few weeks incase a new one will come out soon, anyone have any insider info or help?  thanks   mac rumors says one may come in about 70 days but isk if i want to wait that long

    Regarding your dilemma about a new device or using current device i'd have to agree with
    please read the Terms of Use, they say:
    SubmissionsStay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:
    Speculations or rumors about unannounced products.
    Discussions of Apple policies or procedures or speculation on Apple decisions.
    Now if you really nead advice about a certain product you already have and wish to compare it with a new product you could always ask advice of a sales advisor.
    Believe it or not sales advisors are not just for sales only =)
    Ask your personal sales advisor nearby your home or the closest apple store for advise about your dilemma.
    - so far what i can see is that you're a professional photographer looking for an improvement , now i'm quite positive that you will find your improvement sooner or later wich will make your work alot easier.

Maybe you are looking for