Rebuild the Dimension Flushes out Cube data

Hi David ,
I want to change the implementation details of one of my dimesion from Surrogate key to "use key data sources" . After Applying my dimension data gone ..
Now ran below :
exec dbms_cube.build('CUSTOMER using (LOAD NO SYNCH,COMPILE)');
I expect the cube compilation would be done retaining my old data with the change in dimenisons only .But all the Cube data flushes out . Any way to get this back without running complete cube load again .
Many thanks,
DxP

No, I am afraid you will need to reload the cube. Switching to "use key data sources" means that we have to remove all of the existing dimension members and hence associated cube data.

Similar Messages

Is it possible to change the dimension order when extracting data from HFM?

Hello,
When accessing Consolidation/Extract/Data is it possible to change the dimension order of the extract rather than extracting the standard order?
I can see you can change the dimension order visually by going to "Reorder dimensions" but this does not carry through to the actual extract.
If its not possible using this method is there another method? Trying to avoid using smartview for this purpose.
Many thanks and kind regards,
Rich

Hi,
No, it is not possible to change the order type.
-Paul

My wife set up 2 phones using 1 itunes account, this is not longer working for us, I have set up new itunes account on my computer, but how do I change it on the phone with out loosing data

Hello, when our phones were purchased the wife set up both to her itunes account, We have since set up 2 laptops, and now have setup my own itunes account on that laptop. How do I change the phone account to match, Do I loose data? at the moment there are no apps or music or docs, but I dont want to loose messages, or contacts. We have turned of auto sync on itunes on the laptop. So I need to backup the phone, then do a ios upgrade to the phone as I am on v6.1.3 The wifes is all up to date on her laptop, but mine is so far behind and I am nervous about taking the next step. Please describe step by step.

ThisGal_Drea wrote:
i have my iphone set up with itunes on one computer, but i recently bought my own computer. How do I set up my iphone with the new itunes account?
Do you mean iTunes library?
iTunes account is what you use to make iTunes purcahses.
iTunes library is what is on your computer.
It says my phone can only be set up woth one itunes account. How do I remove the previous account?
No, it tells you it can only be sync'd with one iTunes library.
Simplest way is to copy the entire /Music/iTunes/ folder (thisis the iTunes library) from old computer to new computer.

Blender package in the repo is out of date

Blender 2.49 has bean out for some time, yet the package in the repository is still at version 2.48a. On other distros(Ubuntu) I normally compile Blender from SVN, but Arch has previously kept up with the fast release cycle, though not with 2.49 apparently.

This builds the latest version for me. It may not be perfect, but it might be a start. It's based of an old script I had. Also, I have scripts for the Sim Physics branch (which has volumetrics) and the upcoming 2.5 branch (which ain't quite ready for prime time testing but has much of the new UI stuff)
Note: IT BUILDS FROM SVN, so it builds the LATEST release from SVN -- it's "bleeding edge" on the stable trunk!
pkgname=blender-svn
pkgver=14890
pkgrel=1
pkgdesc="SVN version of Blender (called bf-blender)"
arch=('i686' 'x86_64')
url="http://blender.org/"
depends=('openexr' 'libxi' 'libjpeg' 'libpng' 'ffmpeg' 'gettext' 'python' 'desktop-file-utils')
makedepends=('scons' 'subversion' 'sed')
provides=('blender')
conflicts=('blender')
license="GPL"
install=blender.install
source=(blender.sh blender.desktop blender.png)
md5sums=('e1bd54aaeedfbd934e532b6cad8c44f0' 'aa587d90d9ed14fc3548d1a1e882d853'\
'2718ae258377bcc9c9942c28110ee89e')
_svnroot="https://svn.blender.org/svnroot/bf-blender/trunk/blender"
_svnmod="blender"
build() {
# Get the sources
cd $startdir/src
msg "Connecting to blender SVN server......."
#svn co $_svnroot $_svnmod -r $pkgver || return 1
svn co $_svnroot $_svnmod || return 1
msg "SVN checkout done"
cd $startdir/src/$_svnmod
scons || return 1
# so, now we compile some plugins
mv -f $startdir/src/install/linux2/plugins/* \
$startdir/src/$_svnmod/source/blender/blenpluginapi/
cd $startdir/src/$_svnmod/source/blender/blenpluginapi
chmod 755 bmake
make
# And...Install!!!
cd $startdir/src/install/linux2
install -D -m755 blender $startdir/pkg/usr/share/$_svnmod/$_svnmod
cp -R .blender/locale $startdir/pkg/usr/share/
install -m644 .blender/.bfont.ttf $startdir/pkg/usr/share/$_svnmod/.bfont.ttf
install -m644 .blender/.Blanguages $startdir/pkg/usr/share/$_svnmod/.Blanguages
cp -R .blender/scripts $startdir/pkg/usr/share/$_svnmod/
mkdir -p $startdir/pkg/usr/share/$_svnmod/plugins/{sequence,texture}
cp $startdir/src/$_svnmod/source/blender/blenpluginapi/sequence/*.so \
$startdir/pkg/usr/share/$_svnmod/plugins/sequence/
cp $startdir/src/$_svnmod/source/blender/blenpluginapi/texture/*.so \
$startdir/pkg/usr/share/$_svnmod/plugins/texture/
install -D -m755 $startdir/src/blender.sh $startdir/pkg/usr/bin/$_svnmod
install -D -m644 $startdir/src/$_svnmod.desktop \
$startdir/pkg/usr/share/applications/$_svnmod.desktop
install -D -m644 $startdir/src/$_svnmod.png $startdir/pkg/usr/share/pixmaps/$_svnmod.png

I have the latest version of firefox and I tried to follow the instructions for cookies, only the instructions seems out of date. How do I fix this?

I have to adjust my cookies and I found the instructions on your site. When I followed the instructions, I found that it seems for an older version and not the new one. The privacy settings are not the same as they once were and I can't make any adjustments to may cookies except to delete them.
What I could do was go to the 'Firefox' tab at the top left corner, go to history, Clear recent history, and so on. I can't make any adjustments to a single cookie. It's all or nothing.
Are there any other ways for me to make the adjustments?

To restore the classic menu bar, you can do any of these:
orange Firefox button > Options > Menu Bar
tap the Alt key > View > Toolbars > Menu Bar
right-click a blank area of the tab bar or navigation bar > Menu Bar

HT201364 why can't I download os x mavericks my computer is brand new It keeps defaulting the computer is out of date

Why am I unable to download os x mavericks on my new macbook pro with retina

Because the brand new (late 2013) models come with a version of Mavericks tailored to the new hardware.
Eventually there will be a version you'll be able to download, but the App Store version doesn't currently have the necessary drivers to successfully run your machine. Check your build number - it's different to the App Store build of 13A603.

Gmail reports the Firefox is out of date

I am running Firefox 35.0.1 and I have the following User Agent String:
Mozilla/5.0 (Linux; U; Android 4.3.1; en-gb; GT-I9300 Build/JLS36I) AppleWebKit/Gecko/20100101 Firefox/35.0.1 /534.30 CyanogenMod/10.2.0/i9300
Should I have something different in the string to get Gmail to work properly?

Is that an unofficial, 3rd party build for Android?
''moving to the Firefox for Android queue''

I am getting the "urgent/out of date" notification. However, I have downloaded the "newer version" many times but it does not take. Why?

Advanced search
URGENT!
Your version of Firefox is no longer protected against online attacks.
Get the upgrade - it’s fast and free!
About Mozilla

HI,
Thanks for the information. I am a bit nervous about the method because I get a "serious" warning when I put the command in the URL. Also, I wonder if you know the answer to this: Someone/Firefox pushed an upload tab to me. That is the best way I can explain what happened. Now, sometimes I get an ! in a triangle, sometimes I get an outdated message with the Firefox logo in place of the ! and sometimes it does not show an icon indicating the program is out of date. When I belly up to the URL and do the commands you mentioned, do you know if all these glitchy things will be taken care of? dmer

Objects are not referenced in cube data source view. Large model.

Looking at large model. 100+ measure groups, 200+ dimensions, one cube. Deployed to multiple customers in production as a part of custom developed software.
in data tools 2010 I'm looking at the cube on sql 2008, sql 2008 R2 (EE, DE).
In the cube data source diagram we observe 50+ objects that do not have any links to them or from them.
1)
Some of these I was unable to find in DMV's of the cube at all, it turns out they are present in the Data source that is in Data Source Views section.
How did these end/could end up in the cube data source model? they are not available in dimension usage window at all.
2) Others do not have any links from them or to them in cube’s data source diagram, however the dimension usage clearly shows these objects are part of relationships
both regular and many to many depending on the object in question.
We are trying to identify what objects we can ‘trim’ from the model. I’m not sure what am I looking at in this case: data tools have a trouble interpreting diagram for 200+ dimensions and
100+ measure groups (it is a large existing model) and this artifact should not be used to decide what in dimensions is obsolete and can be decommissioned.
We are looking at cube that has over 40 NxM just to one fact not counting regular relationships.
Am I looking at a feature or maybe an issue with the model itself that somehow has developed in the particular cube.
It is not something I came across before.
thanks

Hi，
According to your description, you are designing a large SQL Server Analysis Services cube, the problem is that you are unable view the relationship in the data source
view diagram, right?
In your description, you said that you can see the relationships in Dimension Usage window. In your scenario, can you see the relationship under the Tables pane when expanding
a table's Relationships folder?
General, the relationships will be defined automatic if the relationships were defined in your data source of the cube. And the dimension relationships between cube dimensions
and measure groups in the cube are defined manually in Dimension Usage. In your scenario, you can define relationship manually in the data source view, please refer to the link below to see the details.
http://technet.microsoft.com/en-us/library/ms178448.aspx
Regards,
Charlie Liao
TechNet Community Support

Urgent-Issue in the Dimension tables

Hi Experts,
Question1:
I have a flat file load to a cube.this flat file has 1.5 mil records.One of the dimension created has a 2 dates(original date & current date) assigned.
When i look at dimension table for # entries is 30million.And when i look at the table i see the sids as 0,0 ( for 2 dates) and dim id's being creted.
When i did a search on the dimension table with current date & original date as not equal to 0.I see only 76,000 records.
Question 2:
we have an ODS which loads to the cube.In the process chain we have program that deletes the data in ods which does not match some conditions and then loads it tot he cube.
My question is,since we are not deleting contents from the cube and reloading it from the ODS(Full update).Will i not be seeing same records coming in with Full update which get agrregated in the cube.
Ex: i have a record in ODS.
A   X Z 100 1000
After full update to the cube,the cube would have
A   X Z 100 1000
When i run the process chain and data is dleeted from ODS on some condition and i still have hte same record in ODS and when this loads into cube wont this be aggregated with the previous record.
A X   Z 200 2000
Would appreciate,if anyone could explain if i am missing anything.

Hello,
If you can't see the SID means you have not loaded the master data, that why there is no reference to the SID table and the values are 0.
InfoCube by default will have aggregated values, when there are duplicate records on the Keyfigures will be aggregated.
For example I have a Material Dimension and Customer Dimension
In the fact table, it will be like this
DIM1     DIM2    KF1   KF2
Mat001 Cust1 100    10
Mat001 Cust2 200    5
for this there will be 1 entry in Material DIM table for Mat001 and 2 entries for Customer DIM table for Customer Cust1 and Cust2.
Material Dimension
DIM ID    SID
1             Mat001 (Here it will be SID from Material Master)
Customer Dimension
1             Cust1 (Here it will be SID from Customer Master)
2             Cust2 (Here it will be SID from Customer Master)
Note : DIM ID is the combination of one or more SID in the dimension table.
So the exact fact table will look like
MATDIM    CUSDIM       AMT      QTY
1               1                  100        10
1               2                  200        5
If you load the data again with same characteristics values then the key figure will be aggregated
Example if you load
Mat001 Cust2 25 5
then the fact table will not have a new entry instead the it will aggregates and looks like (bolded one)
MATDIM    CUSDIM       AMT      QTY
1               1                  100        10
1               2                  220        10
Hope its clear
thanks
Chandran

My iMac PowerPC G4 will not connect to my Belkin N router. I have not been able to connect for so long that I actually gave up on this computer until today, so it is a little out of date software wise. It is running OS 10.3.9.

First off i apoligize for the title length, a bit new to help forums and didnt realize thats what that was .
Anyways;
My iMac PowerPC has been having this issue for quite a few years, prompting me to flat out replace it. I recently had a friend come to need a computer, and told them they could have it once i got it working.
The unfortunate problem that i luckily discovered: my friend and i use the same brand / model of Router, the Belkin N+ (N plus incase it removes the plus sign like it did in the title).
Ive tried everything i know, which isnt much. I've verified the password is correct, ive restarted the computer, and ive restarted my modem and router. Nothing works.
I should mention also that the computer is out of date program wise (obviously) since i havent been able to connect with it in so long. I am still using Internet Connect, and the computer still gives me the option to try .Mac.
Any help would be greatly appreciated.
Dean

The router is much, much newer than the computer, perhaps some characteristic of the WiFi network as it's currently setup is preventing the computer from connecting.
Try to go back to the basics: set your WiFi network to "b" mode only (i.e., turn off "g") and termporarily remove the password from it. See if the computer will at least establish a connection at that point. Then start turning on one thing at a time ("g" mode, then security, etc).
Not sure what format your WEP key is, but if it's not 10 characters (the minimum for the standard, which constitutes a 64-bit key), you can try making it that long. If it's 13 or 26 characters, it might be a higher encryption than the computer can support.
If all else fails, you could try looking on ebay/craigslist for a copy of Tiger to install on the iMac, which would have software support for more WiFi encryption schemes. Also, it would provide software support for USB WiFi adapters that would also be able to connect to more modern networks.

What is the best way to store data for this project?

hey everyone,
I have been subscribed to this for a while, not sure if I have ever actually asked anything though.
I have a project on the go for myself/portfolio
It is a booking sheet, where by I have a GUI that has a diary system of a day followed by time slots. This also has a date picker that can change the date of the booking sheet
I want to be able to store mainly strings and ints,
I need to be able to store, retrieve and on occasion change some data.
I was looking at using something called JExcelAPI but I cant get that to work at all, I asked for assistance but was refered to here.
what would be the best way to implement this data storage?
davyk

Hey everyone,
Back again,
I got this this little snippet of code working but want to ask you guys for a little bit of help on it. if thats ok?
try
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     String dataSourceName = "mdbTEST";
     String dbURL = "jdbc:odbc:" + dataSourceName;
     Connection con = DriverManager.getConnection(dbURL, "","");
     // try and create a java.sql.Statement so we can run queries
     Statement s = con.createStatement();
     s.execute("create table TEST1234567 ( column_1 char(27), column_2 char(150), column_3 char(150), column_4 char(150), column_5 char(150), column_6 char(150))"); // create a table
     s.execute("insert into TEST1234567 values('"+date+"','"+a+"','"+b+"','"+c+"','"+d+"','"+e+"',)"); // insert some data into the table
     s.execute("select column_7 from TEST1234567"); // select the data from the table
     ResultSet rs = s.getResultSet(); // get any ResultSet that came from our query
     if (rs != null) // if rs == null, then there is no ResultSet to view
                while ( rs.next() ) // this will step through our data row-by-row
          /* the next line will get the first column in our current row's ResultSet
          as a String ( getString( columnNumber) ) and output it to the screen */
               System.out.println("Data from column_2: " + rs.getString(1) );
     s.execute("drop table TEST1234567");
     s.close(); // close the Statement to let the database know we're done with it
     con.close(); // close the Connection to let the database know we're done with it
catch (Exception err)
     System.out.println("ERROR: " + err);
     err.printStackTrace();
}there are more columns, but i cut this code down.
my question is:
I think I want a method with an if statement to see whether the table is created or not, if not create it, but how do I go about this? I have searched the API and google, but my brain is fried.
Also do I always have to do the try/catch and have the code of Class.forname to Statement s in all methods that want to deal with the table?
davy

"Some of your Quicktime software is out of date" popup

I must have had an earlier version of quicktime installed on my computer, but I have updated to 7.2, all the patches etc.. And I get this error. I have gone as far as uninstalling all Apple components, deleting all refrences to Quiktime in the regtistry and reinstalling. The same messgae comes up in two seperate popups. The annoyance level in unbeliveable. Any assistance getting rid of these would be appreciated. I saw the question posted on the forum for an earlier release of QT and the fix was to patch it. I have even upgraded to PRO in an effort to get more support for this issue. Any assistance would be great.

I also am plagued with this problem. In case it helps anyone to diagnose this issue, here is how it started on my computer. It showed up immediately after installing Kid Pix Deluxe 3. During the install, the Kid Pix software said that I needed to install Quicktime to run the program. Since I already had the latest iTunes/Quicktime softare (v7.4), I chose not to install it (the Kid Pix CD had Quicktime 5). When I restarted my computer, it immediately brought up the "Some of your Quicktime software is out of date..." dialog box. Ever since, programs that access Quicktime in some way cause the "...out of date..." dialog to appear. As of yet I have not seen any solution that works; the recommendations to uncheck Flash files in the MIME settings and to uncheck automatic updates did not work for me. Uninstalling Kid Pix and repairing my Quicktime and iTunes installation do not fix the problem either. I have not tried completely uninstalling and then reinstalling Quicktime and iTunes.

SFR drops traffic when policy is out-of-date?

Hi,
We are evaluating a 5515X with FireSIGHT.
I am routing a few guest networks through the lab ASA but are experiencing some strangeness :)
Three times it has suddenly started dropping traffic, and I really can't pinpoint the reason..
The things that I have noticed when I get the warning from our support staff, is that there are policies out-of-date on the ASA. (See att. img policy_out-of-date.png). And the when I apply the policies the traffic starts again..
And when I look at the logs from the ASA the thing thats sticks out is the sudden spike of SYN Timeouts (See att. img syn_timouts.png).
I have "Inspect traffic during policy apply = Yes", and I have read that this could stop the traffic "when applying" the policy. But should that really block traffic when the policy is out-of-date?
Do you guys have any idea whats happening here, or noticed anything like this before?
Is there a log that shows why the policy gets out-of-date?
Regards Falk

As far as getting the package in the repo updated as mentioned above it all depends on the maintainer for that particular package. What you can do to help is go to the homepage, search for the package and flag it as out of date. FYI this has already been done for mythtv.
To upgrade on your own the best way to do it is start from the same PKGBUILD that is used to build the official package through abs. You can find all the info you need on the wiki page.
Typically the PKGBUILDs in the AUR have some different functionality from the main version in the repo, and aren't usually what you are looking for if all you want is a version bump.
It is usually best to remove your installed version before using a version from AUR. Most AUR PKGBUILDs will have conflicts (and provides) for other versions of the same package and thus pacman will give an error when trying to install it. If you are just bumping the version of the same package you will not need to remove it first.
EDIT: You can use pacman -Rd to remove (and replace) a package if others depend on it.
Last edited by quigybo (2010-06-18 04:51:24)

Installing ARD on MacBookPro " Software out of date ???"

Hi all,
I've replaced my powerbook with a new MacBookPro and I want to install ARD 2.2 that I bought earlier this year. However, it won't start up and I get a message saying that the software is out of date and to run the software update. I installed the 2.2 updater but still , no joy. Can anybody help me with this please ? Thanks Norman
MacBookPro Mac OS X (10.4.6) iMac G5, Powerbook G4's, G4, G3, powermac...etc

You need to set the Rosetta checkbox, but not enable the ARD client in System Preferences.
If the ARD client is enabled in the System Preferences it will get launched when the machine is booted up, and in that scenario it does NOT launch under Rosetta (you can verify this by looking at it in Activity Monitor).

Rebuild the Dimension Flushes out Cube data

Similar Messages

Maybe you are looking for