Receipt Creation Note - require explanation

Gurus,
I was creating a standard receipt and I got the following message,
Statement is being run or already run for the Receipt Date entered. Please enter the appropriate date later than the 08-DEC-10.
Just to let you know 08-DEC-10 is today and the receipt date, GL date and maturity date was entered as 08-DEC-10.
I was first wondering whether the STATEMENT in the above message is bank statement or account statement. I couldnt make sense of either as the bank statement is not being or been loaded for 08-DEC-10 as yet. Neither was somebody trying to print the account statement or printing an invoice on the same party etc.
has anybody seen this note? I am using eBS 11.5.10. Any input will be great.
Thanks
regards
UTP

caesar dutta wrote:
Hi:
I would like to have a good tutorial on SQL Performance tuning so that I can face some coming interviews. I have observed that in many interviews, the interviewer
is not liking answers to index etc rather asking more on Hash Joins, Nested loops with difference between them and when one is better over the other. I would also like to have explanation on Sorting, mergin etc.
To learn these specific things you have talked about, i would suggest you to read Tom Kyte's Effective Oracle by Design. There is one dedicated chapter to SQL and it covers all the topics you talked about above.
Otherwise also, it is an amazing book and a must read.

Similar Messages

Inspection lot creation not required for intercompany Stock transfer order

Hi Team,
The client does not want system to create inspection lots for inter comapny STO. But for intra STO system does not create the inspection lot and thye are happy with it.
I have have flagged the indicator "QM not active' for the movement type
101 entry as below at transaction code OMJJ.
101 B(goods movement for Purchase Order) X(Stock Transport Order)
Even after flagging the above indicator, system is still creating the inspection lot at the time of GR for InterCC STO.
Are you aware any other place to control inspection lot creation for Inter company STO.
Thanks & Regards
Mangesh

The ispection types assigned to the material are given below.
Z05 Goods Return Inspection(copy of 05)
Z09 Shelf life extension Inspection(copy of 09)
Z89 Inspection for Quality Assurance(copy of 89)
Z90 Goods Receipt for Trading goods( It is a copy of 01 inspection type)
There is no inspection type 08 active in the material .
Thanks & Regards
Mangesh

Goods receipt not required for freight items

Hi Experts,
We are using freight charge as extra line item in purchase order. Now client want that there shouldn't be any goods reciept if it is "Freight" item. I am thinking to use different material group or item category. Please advise if it is possible that if user enter PO number in MIGO then freight item should not appear (Based on material group or item category).
Also we are using quantity variance in Invoices, is it possible system don't block freight items as goods receipt is not required for these.
Regards,
Kamal

Hi,
For not receiving the goods with respect to freight line item in PO,
1. First uncheck the Goods receipt indicator in PO delivery tab,.
2. also uhchek GR based invocie verification in Invocie tab,
3. As GR based invocie verisfication is not activated system will not block for quantity variance.
Regards,
Bharat.

Expense Reports Which Do Not Require ReceiptS, Request AP to Review

Expense Reports Which Do Not Require Receipts And Have Justification Entered Request AP To Review
Expense Reports Which Do Not Require Receipts And Have Justification Entered Request AP To Review
We am getting an error in the workflow for an five expense report.
The workflow is stopped at "Request AP To Review For Spending Policy Compliance"
I have looked in metalink for this particular scenario. And have come up with Note: 273784.1
In reading the note. Can not follow the fix.
If anyone has come across this issue. Please provide with an explanation how to resolve issue

I found the answer and I am posting it here in case someone else needs it:
You need to run the Expense Report Export with the Debug Switch on (you can find this under the request's parameters). When the output is ready, just select "View Log..." and search for the "REJECT CODE"; it will let you know what went wrong with your expense report. In my case, the suppliers I was using had invalid liability accounts. As soon as I updated them, the invoices were generated.
Regards,
Astrid

[svn] 3121: Optimized QualifiedIdentifierNode creation by not requiring a throw

Revision: 3121
Author: [email protected]
Date: 2008-09-05 11:40:44 -0700 (Fri, 05 Sep 2008)
Log Message:
Optimized QualifiedIdentifierNode creation by not requiring a throw
away IdentifierNode. This reduces overall object creation and GC
time.
tests Passed: checkintests, asc-tests
Needs QA: YES
Needs DOC: NO
API Change: NO
Reviewer: tierney
Code-level description of changes:
asc/src/java/macromedia/asc/semantics/FlowAnalyzer.java
compiler/src/java/flex2/compiler/as3/AbstractSyntaxTreeUtil.java
compiler/src/java/flex2/compiler/mxml/ImplementationGenerator.java
Modified NodeFactory.qualifiedIdentifier() calls to use the
IdentifierNode's name and position.
asc/src/java/macromedia/asc/parser/NodeFactory.java
Modified NodeFactory.qualifiedIdentifier() calls to use the
IdentifierNode's name and position.
Modified identifier(String, boolean) to call identifier(String,
boolean, int).
Modified identifier(String, boolean, int) to check for "arguments".
Modified qualifiedIdentifier() to take a String instead of an
IdentifierNode.
asc/src/java/macromedia/asc/parser/QualifiedIdentifierNode.java
Modified constructor to take a String instead of an IdentifierNode.
asc/src/java/macromedia/asc/parser/Parser.java
Added parseIdentifierString() and parsePropertyIdentifierString()
and modified parseIdentifier() and parsePropertyIdentifier() to use
them.
Modified qualifiedIdentifier() calls to use parseIdentifierString()
or parsePropertyIdentifierString().
asc/src/java/macromedia/asc/parser/VariableDefinitionNode.java
Modified NodeFactory.qualifiedIdentifier() call to use the
IdentifierNode's name and position.
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/parser/NodeFactory.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/parser/Parser.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/parser/QualifiedIdentifierNode.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/parser/VariableDefinitionNode.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/semantics/FlowAnalyzer.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/AbstractSyntaxTreeUtil.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/ImplementationGenerator.java

I have no clue where to startHow about the tutorials?
so if somebaody can gve me sample codes or can showSample code? Easy, take this:
public class SampleClass {
private static final String TEXT = "Hello World!";
public static void main (String[] args) {
System.out.println(TEXT);

HTTP server code 404 reason Not Found explanation Not Found

Hi all
I am facing this error "HTTP server code 404 reason Not Found explanation Not Found" during a asynchronous xml message sent to a buisiness service
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>404</SAP:P1>
<SAP:P2>Not Found</SAP:P2>
<SAP:P3>Not Found</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP server code 404 reason Not Found explanation Not Found</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
could you provide an explanation on this error.

Hi
Go through this
Error: 404 Not Found
Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs. Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination.
**********Reward points if usefulll.**********

Not Required Main Work Centre on Order Header Maintenance Order

Hi Experts,
I want to know about main work center on order header maintenance order. Standart SAP is main work center required, and i want to set main work center on order header is not required. How Can i set Main Work center on order header is not required?
Thank you experts for the answers,
Best Regrads,
Bernardus Jalu
Edited by: bernardus jalu on Jan 17, 2012 8:46 AM

Hi
Main workcenter is the responsible workcenter in a order and is used as a reporting selection criteria in major reports(IW38/IW39/IW28/IW29/IW68/IW69 etc). From it also the responsible cost center gets derived. Also it gets copied to the Performing workcenter fields of each operations. So why you dont wants it to be used. It can be maintained as master data in technical objects & gets copied to notifications/orders while creation
Shakti
Edited by: SHAKTI BEHERA on Jan 17, 2012 3:41 AM

Code in main does not require catch, but code in constructor does

this is the original program, its all in main. i took all the code out of main and put it in a constructor to make it more usable, and started making the necessary adjustments. i eventually got it to work but i had to catch exceptions EVERYWHERE. why does this code not require so many exceptions when the code is in main?
import java.io.BufferedInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.net.URL;
import java.net.URLConnection;
public class MainClass {
public static void main(String args[]) throws Exception {
    URL u = new URL("");
    URLConnection uc = u.openConnection();
    String contentType = uc.getContentType();
    int contentLength = uc.getContentLength();
     // ||
    if (contentLength == -1) {
      throw new IOException("Error: No File Found.");
    InputStream raw = uc.getInputStream();
    InputStream in = new BufferedInputStream(raw);
    byte[] data = new byte[contentLength];
    int bytesRead = 0;
    int offset = 0;
    while (offset < contentLength) {
      bytesRead = in.read(data, offset, data.length - offset);
      if (bytesRead == -1)
        break;
      offset += bytesRead;
    in.close();
    if (offset != contentLength) {
      throw new IOException("Only read " + offset + " bytes; Expected " + contentLength + " bytes");
     String dirText = "text";
     String dirTarget = "target";
     String filename = u.getFile().substring(u.getFile().lastIndexOf('/') + 1);
     String dirAndFile;
     // determine weather the file is a target or is to be parsed for more files
     if(contentType.startsWith("text/")) {
          dirAndFile = dirText + "\\" + filename;
     else {
          dirAndFile = dirTarget + "\\" + filename;
    FileOutputStream out = new FileOutputStream(dirAndFile);
    out.write(data);
    out.flush();
    out.close();
}Edited by: chopficaro on May 1, 2010 8:15 AM

ok but still, why do i not have to catch all these exceptions when the code is in main rather than a constructor? heres the code after i put it in the constructor:
import java.io.BufferedInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.net.URL;
import java.net.URLConnection;
import java.net.MalformedURLException;
public class MainClass {
     public static void main(String args[]) throws Exception
          MainClass mc = new MainClass("http://www.google.com/intl/en_ALL/images/logo.gif");
     MainClass(String addr)
          URL u = null;
          try
               u = new URL(addr);
          catch (MalformedURLException e)
               // Print out the exception that occurred
               System.out.println("Invalid URL "+addr+": "+e.getMessage());
          URLConnection uc = null;
          try
               uc = u.openConnection();
          catch (IOException e)
               // Print out the exception that occurred
               System.out.println("Unable to create "+addr+": "+e.getMessage());
          String contentType = uc.getContentType();
          int contentLength = uc.getContentLength();
          if (contentLength == -1)
               System.out.println("no file");//throw new IOException("Error: No File Found.");
          InputStream raw=null;
          InputStream in=null;
          try
               raw = uc.getInputStream();
               in = new BufferedInputStream(raw);
          catch (IOException e)
          // Print out the exception that occurred
          System.out.println("bad input stream "+e.getMessage());
          byte[] data = new byte[contentLength];
          int bytesRead = 0;
          int offset = 0;
          while (offset < contentLength)
               try
                    bytesRead = in.read(data, offset, data.length - offset);
               catch (IOException e)
                    // Print out the exception that occurred
                    System.out.println(e.getMessage());
               if (bytesRead == -1)
               break;
               offset += bytesRead;
          try
               in.close();
          catch (IOException e)
               // Print out the exception that occurred
               System.out.println(e.getMessage());
          if (offset != contentLength)
               System.out.println("didnt read enough bytes"); //throw new IOException("Only read " + offset + " bytes; Expected " + contentLength + " bytes");
          String dirText = "text";
          String dirTarget = "target";
          try
               String filename = u.getFile().substring(u.getFile().lastIndexOf('/') + 1);
               String dirAndFile;
               // determine weather the file is a target or is to be parsed for more files
               if(contentType.startsWith("text/"))
                    dirAndFile = dirText + "\\" + filename;
               else
                    dirAndFile = dirTarget + "\\" + filename;
               FileOutputStream out = new FileOutputStream(dirAndFile);
               out.write(data);
               out.flush();
               out.close();
          catch (IOException e)
               // Print out the exception that occurred
               System.out.println(e.getMessage());
}

Import invoice with status as Approval not Required

Hi All,
Can any one give the way to import an invoice with payables open interface import status as Approval not required.
Thank you in advance.
Raj.

midimidi,
> So to be clear...if the AS is on the main timeline,
import statements
> are not needed, and if the AS is external and imported,
import
> statements are needed.
That's a general rule of thumb, but not 100% applicable.
> Are there any other exceptions to that, or does that go
for all AS3
> classes?
There are exceptions, and the easiest way to find them is to
leave out
your import statements and plug away ... sooner or later,
you'll get a
compiler error, and then you'll know. :)
>> It did strike me *** odd though, an imported .as
file uses the same
>> publish settings as code on the timeline. So why
treat them differently?
FLA files have publish settings, but AS files don't. They're
just text
files. I hear what you're saying ... they end up getting
compiled along
with / into the some FLA anyway -- and that FLA does have
classpaths
listed -- but those same AS files might be compiled in Flex
Builder 2 or
some 3rd party compiler. It would probably make good sense to
require the
import statement for inline FLA code, but not everyone is a
hardcore
programmer, and Adobe knows it. Nothing is *hurt* by using
import in FLAs,
but for folks who just want to do light programming, the
convenience of not
having to use it is nice.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

IOS 6 Gamecenter ID did not require email address. iOS 7 does, how do I sync Game Center on new device

My kid's have 3 iPod Touch's, 4th gen running iOS 6. We all share one Apple ID for purchases, but they each have their own Game Center ID. iOS6 Game Center DID NOT require an email address to use. Now I have bought them all iPad mini's that are running iOS 7. iOS7 REQUIRES an Apple ID to use. How do I import their Game Center info onto the Mini's?

Hi Sonnyboy89,
I am a little unclear as to what you are trying to do with Game Center on the iPads, but you can enter each user’s Apple ID in Game Center on their device using the steps in this article -
Using Game Center on your Mac or iOS device
http://support.apple.com/kb/HT4314
Thanks for using Apple Support Communities.
Best,
Brett L

T/F: iPhone users are not required to pay $15/month extra for Good Technology

I have a personal Droid RAZR M. You may wonder why I am posting in the iPhone forum but you are about to find out.
I have access to corporate e-mail via Good Technology. When I got this service set up at the same time I acquired the phone, I was required to upgrade from a $30/month 2GB plan to a $45/month 2GB plan just to have this access ("needed for access to company servers"). That was a surprise but I got over it. However, since then, I have come to learn the following:
1. It appears that other than VZW, no other carriers are charging users extra for access to Good Technology.
2. Based on a colleague's information from a Good Technology support engineer and a office mate who is using a VZW iPhone, VZW iPhone users are *not* *required* to move to an Enterprise plan aren't paying an extra $15/month. If one searches the Internet, I am not the only one asking about this.
If you are using a Verizon Wireless iPhone and have Good Technology on your phone, would you let me know if were *required* to upgrade your data plan and pay extra just for using Good Technology?
Thanks,
Techvet

I need to check some information at work about this, since they have some guidance on how their employees can connect to their corporate email with android and iphone devices.

My service provider's SMTP does not require a password but the option "non" does not appear on the IPOD Touch 5th gen. Fix?

I have relay.skynet.be as my outgoing server and it does not require/allow password protection. When configuring mail on the Ipod the option of "non" is not given for the outgoing server. Is this a skynet issue or is there an Ipod solution?

Google for:
setup XX email on iphone
to see if ony of the returned sites help.
XX is you email provider.

Bind Variable : required - no message, not required - error

hi
Please consider the example application created using JDeveloper 11.1.1.6.0
at http://www.consideringred.com/files/oracle/2012/RequiredOrNotBVarApp-v0.01.zip
It has these View Objects defined
- EmployeesReqNoValueBVarVO which has a required Bind Variable, and where clause "last_name like '%' || :LastNameBVar || '%'"
- EmployeesNotReqNoValueBVarVO which has a NOT required Bind Variable, and where clause "(:LastNameBVar is null or last_name like '%' || :LastNameBVar || '%')"
The Bind Variable in both View Objects does NOT have a value (no default value, not programmatically set, not entered by the user, ...).
This "no value set" aspect could be the result of a "development error", but the resulting observed behaviour is at least "peculiar".
- scenario (sc1) : run "try tryEmployeesReqNoValueBVarVO", see a table filled with rows and NO message about the required Bind Variable
- scenario (sc2) : run "try tryEmployeesNotReqNoValueBVarVO", see "No data to display." in the table and the "Missing IN or OUT parameter at index:: 1" error for the NOT required Bind Variable for a where clause that can deal with null values
- question (q1) How can be explained that scenario (sc1) does not result in an error message about the required Bind Variable (and scenario (sc2) does result in an error message about the NOT required Bind Variable)?
- question (q2) What does the "Required" checkbox for a Bind Variable really mean for Bind Variables used in a where clause of a View Object?
If the described behaviour can be reproduced (using RequiredOrNotBVarApp-v0.01.zip), confirmations are welcome.
(Aspects of these scenario's could be related to forum thread "Bind variable required/not required: strange behaviour".)
many thanks
Jan Vervecken

Thanks for your reply Frank.
Frank Nimphius wrote:
... your query actually is dependent on the existence of the bind variable because the bind variable is used in the where clause part. ...Sure, and the Bind Variable does exist (in both (sc1) and (sc2)).
... This has nothing to do with whether the bind variable value is checked for NULL and if the value it contains is NULL performs an "all you can eat" type of query. Because the existing, NOT required Bind Variable has not been given a value in scenario (sc2), the check for NULL only makes more explicit that NULL is a valid value for the SQL statement.
... Non required bind variables are used in the context of view criteria to avoid missing IN or OUT parameters. ...The "Required" checkbox for a Bind Variable is also available/enabled when the Bind Variable is not used in a View Criteria (in both (sc1) and (sc2)).
... In the case of a view criteria, the VO query may be executed without the view criteria applied and for this reason should not fail only because the defined bind variable is not provided. ...No View Criteria in the scenario's (sc1) and (sc2) I descirbe.
... If you run the query in the tester, you get
(java.sql.SQLException) Missing IN or OUT parameter at index:: 1
and no query is executed at all for EmployeesNotReqNoValueBVarVOSure, that matches scenario (sc2), but the Bind Variable can be configured as NOT required, how can it be missing?
The JDeveloper help page "Create or Edit Bind Variables Dialog - Variable Page" says:
"... Alternatively, you can use the SQL Statement page of the Edit View Objects dialog to enter a parameterized WHERE clause. Note that the bind variables you enter in a parameterized SQL WHERE clause will require a valid value at runtime or a runtime exception error will be thrown. ..."
So, null as a valid value, seems to explain the behaviour in scenario (sc1).
"... In contrast, when you create a view criteria filter condition that references a named bind variable, you can specify whether the value is required or optional. ..."
But, the "Required" checkbox is also available (to uncheck) for Bind Variables that are not used in a View Criteria.
Specifically for the "Required" checkbox the help page says : "... Select if you want to make the value of a name bind variable required for any usage the references the named bind variable. For example, when the value is required (default), all view criteria items that reference the named bind variable will fail to execute unless a valid value is supplied at runtime. Alternatively, you can leave the value not required and use the Create View Criteria dialog to specify whether or not individual view criteria items require the value. ..."
Again, the focus is on View Criteria, although it can also be unchecked (configuring as NOT Required) for Bind Variables that are not used in a View Criteria (which does not seem to be something you should do).
But, still, there is a perspective here that makes this possibly very confusing:
- a View Object where clause with a required Bind Variable, no value set --> results in rows, and NO message about a missing value
- a View Object where clause with a NOT required Bind Variable, no value set --> results in no rows, and a message about a missing value
regards
Jan

Error while running adcfgclone on APPS tier (ERROR: context creation not completed successfully)

I am getting below error while running adcfgclone on APPS tier
ERROR : Unable to set CLASSPATH
/corp_ex1/DRPM/drpmcomn/clone/bin/../jlib/classes111.zip: is missing
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
ERROR: context creation not completed successfully.
Please check /tmp/adcfgclone_29475.err file for errors
i copied classes111.zip from IAS_HOME to COMMON_TOP . Now I am getting below error
First Creating a new context file for the cloned system.
The program is going to ask you for information about the new system:
ERROR: context creation not completed successfully.
Please check /tmp/adcfgclone_30763.err file for errors

Please post the details of the application release, database version and OS.
ERROR: context creation not completed successfully
This is a generic error, please check the log files for details about the error.
Thanks,
Hussein

Document is in transfer for PO, creation not possible

Hi
We are using SRM 4.0 EC scenario. Recently we have been facing the subjected error 'Document is in transfer for PO, creation not possible' while making the confirmation in SRM. It is observed that this is happening mostly in case once we make GR and cancel and repost. Thru some other thread posted in forum, came to know taht we need to delete the entries in table "BBP_DOCUMENT_TAB" via FM ''BBP_DELETE_FROM_DOCUMENT_TAB''. I ran thei FM but found NO poitive results. Hope somebody can help me out. This error became very common in our production system
Thanks
Kiran

Hi Kiran,
Please, use the report CLEAN_REQREQ_UP to clear the entry made for the GR in BBP_DOCUMENT_TAB. The problem comes because there is an entry for the GR in the table probably from the previous creation.
Regards
Saravanan.
Please award if useful

Receipt Creation Note - require explanation

Similar Messages

Maybe you are looking for