Received Email adds to Autofill for Email Recipients

It doesnt matter what email I receive , whether it be email directly to me, or email from websites, to email from scam porn sites, every email I receive adds itself to my autofill function when I go to compose an email. I thought I had a problem with my phone, so I completely reloaded the software from scratch, but sure enough, every incoming email, will show up in my autofill list when I go to compose an email.. This is just plain stupid, as well as making entries that will eventually add up to the thousands over time.
Is there any way to stop this from happening ???
The majority of email I receive I dont even read, just delete right away, but the sender will still show up in my autofill list when composing an email.
When sending email on my computer using the same email address, this is not a problem, as they do not show up there , only on my Z10.

No, it isn't. Forward it to [email protected] and then delete it.
(102278)

Similar Messages

  • Action to send email for multiple recipients

    Hi gurus,
    Currently the user needs to send a email for multiples recipients according to the organization structure.
    For example:
    The user generates a complaint and the systems must notify by email the department responsible to solve this complaint, sending an email for all employees assigned into this organizational unit.
    How should I configure the action to send an email for the whole departament?
    Best Regards,
    Gabriel Santana

    HI Gabriel,
    Get the email ID's of all the recipents from orgunit using FMs <b>RH_STRUC_GET</b> and <b>BAPI_BUPA_ADDRESS_GETDETAIL</b> into internal table <b>et_mailid</b> and then using FM <b>SO_NEW_DOCUMENT_ATT_SEND_API1</b>.
    For reference check the code below:
    <b>*i_message has contents of mail body</b>
    DATA:    g_sent_all(1) TYPE c,
             g_doc_data LIKE sodocchgi1,
      DATA:  i_message      LIKE solisti1   OCCURS 0 WITH HEADER LINE,
             i_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
             i_receivers    LIKE somlreci1  OCCURS 0 WITH HEADER LINE.
    Fill the document data.
        g_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
        g_doc_data-obj_langu = sy-langu.
        g_doc_data-obj_name  = 'SAPRPT'.
        CONCATENATE g_sdltime0(2) ':' g_sdltime2(2) ':' g_sdltime+4(2) INTO g_time.
        CONCATENATE c_subject g_time INTO g_doc_data-obj_descr SEPARATED BY space.
        g_doc_data-sensitivty = 'F'.
    Describe the body of the message
    Information about structure of data tables
        CLEAR i_packing_list.
        REFRESH i_packing_list.
        i_packing_list-transf_bin = space.
        i_packing_list-head_start = 1.
        i_packing_list-head_num = 0.
        i_packing_list-body_start = 1.
        DESCRIBE TABLE i_message LINES i_packing_list-body_num.
        i_packing_list-doc_type = 'RAW'.
        APPEND i_packing_list.
    Add the recipients email address
        LOOP AT et_mailid.
          CLEAR i_receivers.
          i_receivers-receiver = et_mailid-email_id.
          i_receivers-rec_type = 'U'.
          i_receivers-com_type   = 'INT'.
          i_receivers-notif_del  = 'X'.
          i_receivers-notif_ndel = 'X'.
          APPEND i_receivers.
        ENDLOOP.
    Call the FM to post the message to SAPMAIL
        CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
          EXPORTING
            document_data              = g_doc_data
            put_in_outbox              = 'X'
            commit_work                = 'X'
          IMPORTING
            sent_to_all                = g_sent_all
          TABLES
            packing_list               = i_packing_list
            contents_txt               = i_message
            receivers                  = i_receivers
          EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
    Regards,
    Amit
    *Always reward points for helpful answers
    Message was edited by:
            Amit Kumar

  • How to use one email adress for multiple recipients

    Hello,
    I'd like to know how to use one email adress for multiple recipients. 
    this would be very useful or projects. for example;
    if i send one mail to [email protected], all people in this project get an email.
    I will add the people in this project myself. 
    I know it is possible, but I don't know how to do it ;-)
    please help me! 

    Hope this help.
    _http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

  • Some recipients receive email without content

    Recently when sending emails to not all but a few recipients do not receive any content. Message received email contains no content. Has anyone experience this problem. I have used icloud from the beginning without problems until now.

    It's nothing to worry about - Try this.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Problems showing all recipients in received email

    Found the problem described and unsolved in a archived post, still have the same problem now:
    When a received email contains multiple recipients (say 15), then there are only a few shown, followed by a "x more..." link. Clicking on that link has no effect. Currently the only way for me to see all recipients is to show the raw source of the message.
    Does anybody also have that problem or know a solution? A tricky thing to search for.
    Thanks!

    Hi Joel
    Ooops - I had to edit this message...
    Welcome to the discussions!
    Here it works perfectly on more than 20 different systems.
    Do you have other problems with your mouse?
    --greg
    Message was edited by: madconqueror

  • I can not send email from my iPad .  Have been using it for over a year, all of a sudden I can only receive email.  I have a wifi connection in my home and have a A T &T cellular data plan?

    I can not send email from my iPad .  Have been using it for over a year, all of a sudden I can only receive email.  I have a wifi connection in my home and have a A T &amp;T cellular data plan?

    I have a 1st gen iPhone that I just updated the software to 2.0.2
    Now whenever I press the mail icon it goes to the mail app for about 4 seconds, does nothing, no loading of folders, old messages, nothing.
    Then it reverts back to the home screen. Tried restarting, haven't tried restoring, thought I'd look here first.
    Anyone???

  • My ipad receives email with the hotel wifi but will not send.  The error message is "user name or password for ........is incorrect" but both are correct and unchanged.  Restarting iPad didnt help.

    My iPad receives email on the hotel wifi but will not send.  The error message reads "user name or password for smpt......is incorrect" but both are correct and unchanged.  Restarting iPad did not help.

    I did try this too, but when I access my webmail on the iPad, the iPad doesn't allow me to type my message.  I am able to enter in the "to" address and the "subject" line, but then the keyboard will not come up for me to type my message.  Is there some trick to this?  Very frustrating!

  • I want to update iCloud account with new apple id but don't know password for old apple id.  Plus can no longer receive email at old apple id.  How can I delete the current iCloud account on my iPhone if the previously stated conditions exist?

    I want to update iCloud account with new apple id but don't know password for old apple id.  Plus can no longer receive email at old apple id.  How can I delete the current iCloud account on my iPhone if the previously stated conditions exist?

    If the old ID is yours, and if it is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • HT1277 I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

    I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

    Do you have one, two or more entries in the left colum of Mail.app for your mail server(s)?  That is, do you have your Mail.app set up with either a btinternet entry, with a btyahoo entry, or both?  Or more?
    I'm guessing that you might have one account (btyahoo?) listed for incoming (IMAP server) mail, and with the outbound (SMTP server) mail is configured and named btinternet.
    Based on what little I see posted, it looks like BT uses both btinternet and btyahoo, but I'm not exactly clear on how they have their stuff set up, and their web set gets helpful and tries to help configure my mail — I don't immediately see a single web page with the mail server set-up details.  The BT email client set-up starts here.

  • Stop Sending and Receiving Emails for the employee which is no longer exist

    Exchange 2007
    Hi There,
    I have lot's of mailboxes in my exchange server which their users are not with us anymore.
    I would like to stop receiving any emails for them.
     I know if I go to "Mail Flow Settings\Message Delivery Restrictions\Accept messages from\Only Senders in the Following List" and select a dummy user it works but it sends my server information to the sender. and I do not want to give the
    information.
    Any idea how to:
    Stop sending / Receiving email for these type of users?
    OR
    Changing the respond message?
    Thank you in Advance for your time

    You have a couple options.  Removing the mailbox would be the simple solution to stop mail flow, but I am assuming you need the mailbox which is why you have not taken this route.
    Alternatively, if you have a message filtering solution in place that sits in front of your Exchange environment, you may be able create a filter to block inbound messages for a specific address so the message never reaches your internal Exchange servers. 
    This would prevent any information regarding you Exchange servers being returned.
    If you do not have a filtering solution to do this, you can create a delivery status notification (DSN) so that a custom response is returned when messages are sent to a mailbox.  Refer to this article on creating a DSN:
    http://technet.microsoft.com/en-us/library/aa996803(EXCHG.80).aspx

  • Need help for Adapter Specific Message Attributes in Receiver Email Adapter

    We want to use Adapter Specifice Message Attributes(ASMA) in Receiver Email Adapter for sending the mails dynamically, and to set the CC and BCC. I have gone through the help give in <a href="http://help.sap.com/saphelp_nw04/helpdata/en/a5/1b5342d8a7be30e10000000a155106/frameset.htm">SAP Help</a>
    not clear how to use it. Please help to configure this.Any blogs?
    with regards,
    Ravi Siddam

    Hi Kumar,
    This blog explains about using 'Mail Package' option. We have already gone through this link and configured as explianed.  1.it dosen't support CC,BCC and 2. it is old way.
    We are on PI 7.0. It is recommended to use ASMA and in this it is possible to use CC and BCC.
    We don't know how to use ASMA. any help?
    with regards,
    Ravi Siddam

  • I am using i pad mini. I am going through a issue in which i am not able to send mails to my work email add wherein i am able to receive emails from same email id.

    i am using i pad mini. I am going through a issue in which i am not able to send mails to my work email add wherein i am able to receive emails from same email id.

    With one mailbox server in the production site and one in the DR site, you do not have high availability.  If the main site goes down, the cluster loses quorum and all databases dismount.  You must then force quorum or move the file share
    witness to restore quorum.
    I can't tell you why what you observed happened.  At the time of the problem I would have been looking at the transport queues to see what's queued and to where.
    I recommend you look at the configuration of your send connectors to ensure that none of them are dependent upon the DR site server.
    To send mail outside, you must allow relay.  To do this, I recommend you create a new receive connector that's configured to allow relay and restrict access to the application server to keep anyone else from using it to relay.  There are plenty
    of articles on the Internet that describe how to configure a relay connector.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • HT1430 I am having problems receiving emails on my mini ipad, if my wi fi is not on for say 2 days then I switch it on it will not give me the last 3 days emails, only the day I am on.

    I am having problems receiving emails on my ipad mini, if my wi fi has been off for 3 days for eg. when I switch it on it will only send me emails from that day and not from the previous 3 days

    Have you already looked at these emails on a computer?

  • My outlook will not open yet all other microsoft packages will.  When I click on the icon, the 'o' logo will come up for a split second but will not open the package - need to receive emails asap!

    My outlook will not open yet all other microsoft packages will.  When I click on the icon, the 'o' logo will come up for a split second but will not open the package - need to receive emails asap!

    You're very welcome!
    I meant holding the "option" (or "alt") key on your keyboard as you click the Outlook icon on the Dock, and continuing to hold it until you see the Microsoft Database Utility come up. Alternatively, you can open the utility by navigating to Applications/Microsoft Office 2011/Office and then double-clicking the Microsoft Database Utility app.
    When you rebuild your database using that program, a backup copy of your original database (containing your account info, contacts, mail, calendars, etc) will be created. As a security precaution, you should also ensure you have a backup of your database (which you can find by going to Documents/Microsoft User Data/Office 2011 Identities/ and copying the contents of that folder onto an external drive).

  • Recipients not receiving emails even though internet provider shows post in it's esnd folder. Started happening with no changes in configuratuin. Thanks

    Sending emails from my laptop using Thunderbird I get the usual "connecting to...., sending to...,message sent" But recipients do not receive post even though my internet provider's sent folder contains the posts. Cox is my email provider and I can send posts from their WebMail site.
    There were no changes in configuration.
    I should note that I was using a "free" WiFi in Nicaragua.
    Also, I receive emails just fine.
    Cox says it's my email client but I don't see how it could be you guys isince Cox had had to receive the posts in order to put them in the sent folder.
    Thanks
    [email protected]

    have you tried mail to multiple domains or all say cox.net. I have a feeling your email might have got a bad reputation in deepest darkest Africa.

Maybe you are looking for