Receiver content conversion

Hi All,
I got below error while working with receiver file content conversion scenario.
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value '2350' too long (>2 for 3. column) - must stop', probably configuration error in file adapter (XML parser error)'.
I have checked length and source element existence. Both are ok.. I have mapped multiple source elements and contstant values to one target element (The one which is getting error). All source elements are existed. Why am I getting the error?
Thanks inadvance.
Best Regards,
Ashok.

Hi,
Below is the output xml data...
<BGR00>
<STYPE>0</STYPE>
<GROUP>2350RFFP2020</GROUP>
<MANDT>590</MANDT>
<USNAM>SAPBATCH1234</USNAM>
<START>12345678</START>
<XKEEP>1</XKEEP>
<NODATA>/</NODATA>
</BGR00>
Error is:
Column value '2350' too long (>2 for 3. column) - must stop', probably
configuration error in file adapter (XML parser error)'
GROUP is the 2nd column. But it is displaying error in 3rd column with GROUP data.. Does system considers BGR00(node) as a column?
Regards,
Ashok.

Similar Messages

Complex file receiver content conversion

Hi
My challenge is to change this xml structure to a flat file structure using content conversion in a file receiver adapter. My problem is, that I have a record within a record and both records can occur multiple times:
<statusUpdate_response>
   <ProcessID/>
   <SenderSystem/>
   <Results>
      <ResultList> (0..unbound)
            <OKKode/>
            <Reference/>
            <Result/>
            <ResultDetail> (0..unbound)
                 <TYPE/>
                 <ID/>
                 <NUMBER/>
           </ResultDetail>
      </ResultList>
   </Results>
</statusUpdate_response>
Any suggestions?
Maybe some sort of xml flattener before doing the content conversion would do the trick, but then again how is that to be done?
BR MIkael

a small trick might help - /people/shabarish.vijayakumar/blog/2010/01/14/file-conversion-using-nodeception
Also do read - /people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts

Problem in Receiver content conversion

Hi All,
I have idoc to flat file, where my reciever is flatfile.
I have a strucutre like below
Header-1.1
Item..1..unbounded.
footer..1..1,
As i am using PI 7.0 , my requirement is to repeat the item segment multiple times.
I am using fixedlengths, to achieve this i have followed like below.
RecordsetStrcture: Header,Item,Footer
Header.fieldFixedLengths:
Header.endSeparator:'nl'
same as for Item,footer..if i am using the above one i could not able to achieve to generate the item segment multiple times.if i give the item,*..it is throwing exception.
Can any one tell...how to achieve the requirement to generate teh item field multiple times.?
Regards,
Sekhar
can you any one tell me ..how do i mention item segment is occuring multiple times in the reciever content conversion.If only one segment is comming then the scenario is working but if the item segment is comming with multiple times, it is throwing error.
Can any one let me know how do we achieve this.
Regards,
Chandu.

Hi Chandu,
See this Thread Nested structur for receiver file content conversion
Here see the reply given by Arpit Seth . It is the same problem .
This is the exact solution to your Problem.
I think this is very helpful to you.
And Please gothrough this Blog... /people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
Thanks.

Help to Receiver Content Conversion

Hi, i am facing IDoc2File Scenaio.
This file should be a .txt and only should have six numbers.
Incoming is an IDoc with the payload:
<ZPP_EDI_TAFEL SEGMENT="1">
<TAFNR>1</TAFNR>
<DATEI>ERGB.TXT</DATEI>
<TAFIST>014</TAFIST>
<TAFSOLL>020</TAFSOLL>
</ZPP_EDI_TAFEL>
This should be converted into a flat file with content of teh values from TAFNR and TAFIST. It should look like: 014020
I am trying to achieve this with the Content Conversion in the ReceiverAdapter.
in ID is the message type:
MT_Tafel
-Tafel_recordset
--Tafel_Details_Structure
---TAFIST
---TAFSOLL
In my understanding it's like recordset Structure is: Tafel_Details_Structure
So my Parameters look like:
Tafel_Details_Structure.fieldSeperator = ,
Tafel_Details_Structure.endSeperator = 'nl'
Tafel_Details_Structure.fieldNames = TAFIST,TAFSOLL
funny thing is, that after sending the IDoc the txt file contains:
<ns0:MT_Tafel xmlns:ns0="http://www.ips.com/jsn/HatzIDoc">
<SEGMENT>1</SEGMENT>
<TAFNR>1</TAFNR>
<DATEI>ERGB.TXT</DATEI>
<TAFIST>014</TAFIST>
<TAFSOLL>020</TAFSOLL>
</ns0:MT_Tafel>
So there is no content conversion at all. Can someone help?!
br, Jens

Hi Vijaya,
acttually i read everything about it, but i am not able to figure out what i have done wrong.
Can u please help me?!
> Hi,
> Plz go thru the following blogs, these may help u:
>
> receiver adapter:
> 1)http://help.sap.com/saphelp_erp2005vp/helpdata/en/d2
> /bab440c97f3716e10000000a155106/content.htm
> 2)
> https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg
> 1312
> 3)
> https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/
> 1345
>
>
> regards

FIle Adapter Receiver - Content Conversion

I have a xml file as below that I am trying to convert to a simple csv file. All I get is a blank csv file at the ouptput. I tried different setting for the file conversion in the reveiver file adapter. No luck yet. I could write to an output XML file with no problem, so my interface is working!
The SAP Help doesn't provide much info on this. Your help is highly appreciated.
Thnaks.
?xml version="1.0" encoding="UTF-8" ?>
- <ns:PlantMaintenanceMessageType xmlns:ns="http://cs.par/demo/plantmaintenance">
<EquipmentID>10005661</EquipmentID>
<FunctionalLocation>KB</FunctionalLocation>
<Date />
<Time />
</ns:PlantMaintenanceMessageType>

What is your root node ?
For your content conversion you need to specify the Recordset Structure but in your case i dont find an entry for the same.
If your XML had an extra tag like
xml version="1.0" encoding="UTF-8" ?>
- <ns:PlantMaintenanceMessageType xmlns:ns="http://cs.par/demo/plantmaintenance">
<b><details></b>
<EquipmentID>10005661</EquipmentID>
<FunctionalLocation>KB</FunctionalLocation>
<Date />
<Time />
<b></details></b></ns:PlantMaintenanceMessageType>
then your record set structure wud be details
and in you content conversion parameters you cud say
details.fieldSeparator -> ,
details.endSeparator 'nl'
I guess you are on sp13 or above hence there even if you content conversion fails a blank file will be created (thats what i have experienced).
Reagrds,
ShaBZ

File receiver content conversion fields attributes

hi,
i am trying to use file adapter to write this xml to flat file but all attributes of the fields are not written to file ( only elements are written).
the xml file is:
<?xml version="1.0" encoding="utf-8"?>
<n0:MT_Mits_Claims xmlns:prx="urn:sap.com:proxy:DE1:/1SAI/TAS6EAA2B8AB4A5D2DA4145:700:2008/06/25" xmlns:n0="http://colmobil.com/wty/1162/claims_to_manufacturer/mits/">
   <Header>
      <File_ID>GDM001</File_ID>
      <Dist_Code>KS</Dist_Code>
      <Header_Code>H1</Header_Code>
      <File_Descr>CLAIM RESULT DATA</File_Descr>
      <Total_Records>0000008</Total_Records>
      <Filler/>
      <Filename>GDM0010812100016.DAT</Filename>
   </Header>
   <Details>
      <Header_EA File_ID="GDM001" Dist_Code1="KS" Detail_Code="D1" Domestic_Export="E" Dist_Code2="KS" Dealer_Code="2110" Seq_No="0902" Sub_Seq_No="" Page_ID="01" Line_ID="EA" Claim_Type="P" Division="" RFC_Seq_No="" Filler=""/>
      <Header_HA File_ID="GDM001" Dist_Code1="KS" Detail_Code="D1" Domestic_Export="E" Dist_Code2="KS" Dealer_Code="2110" Seq_No="0902" Page_ID="01" Line_ID="HA" VIN="VIN260" Faliure_Date="200810" Odometer_Reading=" 1204" Sold_Date="080820"/>
      <Header_HB File_ID="GDM001" Dist_Code1="KS" Detail_Code="D1" Domestic_Export="E" Dist_Code2="KS" Dealer_Code="2110" Seq_No="0902" Sub_Seq_No="" Page_ID="01" Line_ID="HB" Position_Code="111221" A_Code="12" B_Code="03" C_Code="1" Ref_Code="" Manual_Control="" Comment_Code="" Ratio_Labor="" Ratio_Parts="" Manuf_Code="" Filler=""/>
      <Details_LA_LE File_ID="GDM001" Dist_Code1="KS" Detail_Code="D1" Domestic_Export="E" Dist_Code2="KS" Dealer_Code="2110" Seq_No="0902" Sub_Seq_No="" Page_ID="01" Line_ID="LA" Labor_Pos_Code="" Work_Code="99" Qty="10" Amount="" Ratio="" Comment_Code="" Factory="" Filler=""/>
      <Details_LA_LE File_ID="GDM001" Dist_Code1="KS" Detail_Code="D1" Domestic_Export="E" Dist_Code2="KS" Dealer_Code="2110" Seq_No="0902" Sub_Seq_No="" Page_ID="01" Line_ID="LA" Labor_Pos_Code="231110" Work_Code="10" Qty="01" Amount="" Ratio="" Comment_Code="" Factory="" Filler=""/>
      <Details_PA_PK File_ID="GDM001" Dist_Code1="KS" Detail_Code="D1" Domestic_Export="E" Dist_Code2="KS" Dealer_Code="0211" Seq_No="0902" Sub_Seq_No="" Page_ID="01" Line_ID="PA" Parts_No="" Qty="01" Faliure_Origin="X" Price="0050000" Ratio="" Comment_Code="" Factory="" Filler=""/>
      <Total_Claim_Lines>6</Total_Claim_Lines>
   </Details>
   <Trailer>
      <File_ID>GEE</File_ID>
      <Dist_Code>KS</Dist_Code>
      <trailer_Code>E1</trailer_Code>
      <End_Code>END</End_Code>
      <Filler/>
   </Trailer>
</n0:MT_Mits_Claims>
the content conversion paramters are:
Header.addHeaderLine 0
Header.fieldFixedLengths 6,4,2,30,7,31,0
Header.fixedLengthTooShortHandling Cut
Details.addHeaderLine 0
Details.fieldSeparator 'nl'
Trailer.addHeaderLine 0
Trailer.fieldFixedLengths 3,4,2,3,65
the output file that i get is:
GDM001KS H1CLAIM RESULT DATA             0000008
6
GEEKS E1END
What i need to do to get attributes in file?
Thanks
Tomer

Hi
Assuming the scenario you are trying to implement is XML file to Flat file. You need to map the input structure including attributes to the flat file structure. Then in your content conversion output the flat file structure.
Thanks
Damien

File Receiver Content Conversion

I have the following XML:
<n0:CostCentreServiceCreateRequest>
     <n0:ESB_Header>
          <MessageId>4E77E43F-1D1D-0096-E100-8000AC182411</MessageId>
          <Timestamp>2011-09-19T14:00:00Z</Timestamp>
          <SourceSystem>SAP</SourceSystem>
          <TargetSystem>MDS</TargetSystem>
          <ActionType>CostCentreServiceCreateRequest</ActionType>
     </n0:ESB_Header>
     <n0:CostCentre>
          <Record>
               <Cost_Centre>0010100010</Cost_Centre>
               <Valid_From_Date>1900-07-01</Valid_From_Date>
               <Valid_To_Date>9999-12-31</Valid_To_Date>
               <General_Name>Edu and Train Access</General_Name>
               <Description>Education and Training Access</Description>
               <Person_Responsible>Shala Karan</Person_Responsible>
               <Department>ErlyChld Prg</Department>
               <Cost_Center_Category>1</Cost_Center_Category>
               <Company_Code>1010</Company_Code>
               <Currency_Key>AUD</Currency_Key>
               <Costing_Sheet>Z00001</Costing_Sheet>
          </Record>
     </n0:CostCentre>
</n0:CostCentreServiceCreateRequest>
I want to write it to a CSV file. However, I only want to write the values in the <Record> element and ignore everything else. Is this possible? At the moment, in my content conversion, I have Record entered in the Recordset Structure field. In the details below that I am setting the Record.addHeaderLine, Record.headerLine, Record.fieldSeparator, and Record.endSeparator attributes.
However, what this generates is the following:
CODE,NAME,vaild_to_date,vaild_from_date,description,person_responsible,department,category,company_code,currency,actual_primary_posting_locked_flag,actual_revenu_posting_locked_flag,costing_sheet
4E77DA9E-8943-0099-E100-8000AC182411|2011-09-19T14:00:00Z|SAP|MDS|CostCentreServiceCreateRequest
0010100010
It includes the <n0:ESB_Header> values (which I dont want) and only the first value of <Record>.
Ideally the output would look like this:
CODE|NAME|vaild_to_date|vaild_from_date|description|person_responsible|department|category|company_code|currency|actual_primary_posting_locked_flag|actual_revenu_posting_locked_flag|costing_sheet
0010100010|Edu and Train Access|1900-07-01|9999-12-31|Education and Training Access|Shala Karan|ErlyChld Prg|1|1010|AUD|Z00001
Notice also that the Header is pipe delimited. Is there anyway to set this? So far I can only get the header to be comma delimited.
Thanks,
Krishneel

I want to write it to a CSV file. However, I only want to write the values in the <Record> element and ignore everything else. Is this possible?
Yes its possible. Rest all configuration seems to be fine. Refer the following link.
http://help.sap.com/saphelp_nwpi71/helpdata/en/44/686e687f2a6d12e10000000a1553f6/frameset.htm
Try to refresh cache as well. It might be taking old configuration.
Regards
Raj

Idoc to File scenario: receiver content conversion

Hi,
I have a Idoc to file scenario in which each segment is to be sent in a new line.
Also, even if the segment is not present in Idoc, comma separated blank values are to be sent.
Till now I have been fllowing this blog
File Content Conversion for Multi Hierarchical Structure
But in this case, blank values csv line are not created.
When I used mapWithDefault for parent WPA12 then only 1 instance is created.
For eg.
WPA01
-WPA02
--WPA12
WPA01
-WPA02
--WPA12
There are no values in WPA12 segment
Output
WPA01,a,a,a,a
WPA02,b,b,b,b
WPA12,,,,,
WPA01,c,c,c,c
WPA02,d,d,d,d
Can I make any change in the approach as in the blog to get the desired output?
Regards,
Anirudh.

Hi,
To explain more a bit..
My requirement is to create a flat file from multiple hierarchical xml structure.
Additionally, if the values are not present for some nodes then also I have to send the blank values in flat files. If entire segment is not present then also blank csvs needed to be sent.
regards, Anirudh.

Issue with Xi File Receiver "Content Conversion" fixed length and kanji

I need to create a fixed length file for a customer that has kanji (SJIS) characters in it. The issue is when the length of the value is less than the fixed length. It is padding out with spaces, but it is putting 2 bytes per space instead of one (But it seems to have counted the padding in characters...).
.fieldFixedLengths: 8,6,40,40
.fixedLengthTooShortHandling: Cut
.fieldNames: date,time,name1,name2
Receiver, please don't answer for sender.
File Adapter

Paul,
Can you please tell what is coming in the output file if the values are:
date: 062309
time: 2240
name1: hello
name2: hello2
When you put space here and if it is not showing correctly just to interpret you can use S which will stand for space.
---Satish

DT for File Content Conversion scenario

Hi Guys,
I am working on IDOC to file scenario in which I want to know which type of DT should I go for?
DT_Type
....Row
......Filed1
......Filed2
......Field3
...Row
DT_Type
Or
DT_Type
..Details
....Row
......Filed1
......Filed2
......Field3
...Row
..Details
DT_Type
I am going for Receiver Content conversion as I need to produce Flat like, I have about 30 filed names and I am wondering is it possible not ot mention field names in Content conversion?
What is the parameter to place to get a new line after each record? I am using row.endSeparator as 'nl' I am getting some special character instead of starting a new record in next line.
Thanks
Rajeev

HI,
The SOURCE IDOC strcuture is:
IDOCNAME----
1..1
>IDOC--
1..1
>BEGIN--
required
>EDI_DC40--
1..1 (it has sub nodes but not required)
>E1KNAM1--
1..1
>SEGMENT----
Required
>Werks----
0..1
>Z1KNU2----
0..1 (SUB SEGMENT OF E1KNAM1)
>ZNUM----
0..1
>Z1ADD----
0..7 (SUB SEGMENT OF E1KNAM1)
>PostCode----
0..1
>E1KAVVM----
0..999(SUB SEGMENT OF E1KNAM1)
>VTWEG----
0..1
>LOVEM----
0..1
>E1KAVPM----
0..999(SUB SEGMENT OF E1KNAM1)
>KUNN2----
0..1
>Z1KAN--0..1 (SUB SEGMENT OF E1KAVPM---(SUB SEGMENT OF E1KNAM1))
>NAME1----
0..1
Target File structure is:
MT_Type----
1..1
Row--
0..Unbound
Filed1----
0..Unbound
Filed2----
0..Unbound
Filed3----
0..Unbound
Filed4----
0..Unbound
Filed5----
0..Unbound
Filed6----
0..Unbound
if IDOC contains one IDOC data then it has to generate one file .. If IDOC contains more than one IDOC information then it has to generate one file with multiple IDOC informaiton in it.
how this can be achieved?
Thanks
Rajeev

JMS Adapter Content Conversion

Hi,
I am looking for some help on JMS Receiver content conversion, to put a delimited file on MQ series queue.
I tried the below link, but not able to access the document.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how to use the content conversion module with the xi 3 j2ee jms adapter
If anyone has a copy of the pdf document on JMS content conversion, could you please email it to me at my id : [email protected]
Rgds
R Chandrasekhar

I had send the required PDF
Regards
Arpit seth

Problem with file content conversion in receiver file adapter

Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
Chandra

Posted in Incorrect forum.
Posted again in Process Integration forum

Content Conversion in receiver channel

Hi all,
I have a proxy to FTP scenario with no mapping involved.Over proxy communication PI is receiving the data, I am creating the CSV file using content conversion in receiver channel and placing the file at FTP.
The file name is coming in one of the field of the input xml,I am using variable substitution and setting the file name from that particular field value.But as I don't want that node and file name element in my output file content, please guide me what parameters can I set in my content conversion to remove the FileNode from o/p csv file.
The sample input xml is
<MT>
<Record>
<Field1>1</Filed1>
<Field2>2</Filed2>
</Record>
<Record>
<Field1>3</Filed1>
<Field2>4</Filed2>
</Record>
<FileNode>
<FileName>InutFile</FileName>
</FileNode>
</MT>
I want output xml to be like
1,2
3,4
I have followed this blog /people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12 to cut the FileNode, but it gives an error in cc parameters.
In my actual i/p payload,the Record is 0..unbounded and there are 50 sub elements inside Record element.
Please provide your inputs.
Thanks,
Ruchi

Hi Ruchi,
Change your structure like this.
MT>
<Record>
<Field1>1</Filed1>
<Field2>2</Filed2>
</Record>
<Record>
<Field1>3</Filed1>
<Field2>4</Filed2>
</Record>
<FileNode>
<FileName>InutFile</FileName>
</FileNode>
</MT>
Dont put the filenode under Record.
Also Add the below parameters.
FileNode.fieldSeparator     '0'
FileNode.endSeparator     '0'
FileNode.fieldFixedLengths     0
FileNode.fixedLengthTooShortHandling     Cut
FileNode.fieldNames     FileName
Now use the same parameter mentioned in the blog .Your problem will be resolved.

Receiver File Adapter: Problem with NewLine Content Conversion Parameter

Hello Everybody
On our SAP-XI (SAP NetWeaver 2004s, sp14) I have the scenario to send a price catalogue (IDoc PRICECATALOGUE.PRICECATALOGUE02) from SAP R/3 as csv PRICAT file to a file share.
In the receiver communication channel I have defined
Message Protocol = File Content Conversion
using the following RecordSet:
RecordSet = HeaderRow,MainBody
One header row is followed by one or more main body rows. The csv PRICAT message format demands that there is an empty row (i.e. one carriage return) between header and main body and another carriage return after the last main body row:
<Header Row>
carriage return
<MainBody 1>
<MainBody 2>
carriage return
As content conversion parameters I tried to use NewLine ('nl') to create the carriage returns in the file:
HeaderRow.fieldSeparator = ,
HeaderRow.endSeparator = 'nl'     " new line
MainBody.fieldSeparator = ,
MainBody.endSeparator = 'nl'
Using the settings I have been able to created the carriage return at the end of the file but not the one between header and main body.
As workaround I have used the following approach:
" Add the following XSLT mapping between header and body:
            <SeparatorLine>
                <value>
                    <xsl:value-of select=" '' "/>
                </value>
            </SeparatorLine>
RecordSet and parameters have been changed accordingly:
RecordSet = HeaderRow,SeparatorLine,MainBody
HeaderRow.fieldSeparator = ,
HeaderRow.endSeparator = 'nl'
SeparatorLine.fieldFixedLength = 0,0   " sic!
MainBody.fieldSeparator = ,
MainBody.endSeparator = 'nl'
Has anybody an idea why I failed to receive the first carriage return and has somebody a more elegant solution?
Kind Regards
   Uwe

Hi,
Thanks for reply. I have already used 'nl'.
When i open into the notepad it is showing [] boxes rather then new line.
e.g. 1 [] 2 []
but when we open into wordpad it opens properly.
Customer wants when he opens in notepad it should show line by line.
e.g.
1
2
How should i convince to customer ?

Error in Receiver File adapter using File content Conversion

Hi,
I am getting the following error in the receiver file adapter.
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'statement.fieldFixedLengths' or 'statement.fieldSeparator' is missing
I am using the below parameters for FCC:
Recordset Structure - statement
statement.endSeparator - 'nl'
statement.fieldSeparator - '0X09'
statement.fieldNames -xblnr,wrbtr,newbs,kostl,newko,prctr,xref1,rke_wwfud,rke_wwst3,blart,bukrs,bldate,budat,gjahr,monat,ctype,waers,bktxt,posnr,wbs_element,mwxkz,businessplace,businessplace,c_waers,c_wrbtr,g_ctype,g_waers,g_wrbtr,h_ctype,h_waers,h_wrbtr,trade_id,lob,sgtxt,zuonr,reason_rev,ldgrp,tcode,lifnr
ignoreRecordsetName - true
Please let me know where i am going wrong.
Thanks,
Aparna

Hi Aparna,
I feel the problem in your content conversion parameters is with
statement.fieldNames and ignoreRecordsetName
When you are confirguring receiver file adapter for file content conversion the above one is not required. Please refer below link for details on configuring content conversion in file adapter
[http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm]
Hope this helps !!
Regards,
Amit

Receiver content conversion

Similar Messages

Maybe you are looking for